Department Of Pharmaceuticals - Bihar

37900580 bids are invited for construction of work station room supply and installation of acp wall with aluminium frame , supply and installation of 6mm glass wall aluminium frame , supply and installation of grid false ceiling with aluminium framing , supply and installation of 12mm toughened glass gate , supply and installation of 18mm thickness plywood table , supply and installation of electrical point for ac and shifting of existing electrical items , supply and installation of led false ceiling light , supply and installation of vinyl floor carpet or mat total quantity : 965...

East Central Railway - Bihar

37488799 supply of fibre window glass thickness 6mm transparent including rubber bidding with aluminium frame size 820mm x 460mm with locking plates mentioned as item no. 9 & item no. 10 in drg. no. emu / 4c / asr 5 4 402 alt g [ warranty period: 30 months after the date of delivery ] ...

Department Of Pharmaceuticals - Bihar

37278731 bids are invited for construction of work station room supply and installation of acp wall with aluminium frame , supply and installation of 6mm glass wall aluminium frame , supply and installation of grid false ceiling with aluminium framing , supply and installation of 12mm toughened glass gate , supply and installation of 18mm thickness plywood table , supply and installation of electrical point for ac and shifting of existing electrical items , supply and installation of led false ceiling light , supply and installation of vinyl floor carpet or mat total quantity : 965...

Eastern Railways - Bihar

36893737 supply of wall mounted aluminium frame eduway ( non magnetic ) .wall mounted aluminium frame eduway ( non magnetic ) ., wall mounted aluminium frame eduway ( non magnetic ) one side white and other side green instruction board, size 3 x 4. [ warranty period: 30 months after the date of delivery ] => limited...

Department Of Science And Technology - Bihar

35871908 bids are invited for laboratory furniture items 1 faculty chair office chair: the seat and back are made up of 1.2 ± 0.1cm thick hot pressed plywood measured as per qa method described in ocp qlta p14 18 and upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam is designed with contoured lumbar support for extra comfort. back size 49.0 cm. ( w ) x 47.0 cm. ( h ) , seat size 49.0 cm. ( w ) x 44.0 cm. ( id ) high resilience ( hr ) polyurethane foam: the hr polyurethane foam is moulded with density = 45 ±2 kg / m3 and hardness load 16 ± 2 kg as per is:7888 for 25% compression. 10 2 computer chair computer chair with seat and back are made of injection moulded high impact strength polypropylene polymer compound with indoor grade uv resistance. the tubular weled frame is made from dia2.22 + / 0.03cmx 0.12+ / 0.0128 cm and 3.5+ / 0.03 cm x 0.12+ / 0.0128 am 12 cc wa stainless steel 202 grade tube. the tube are buff polished to give shiny finish, cm. the shoes are made of high impact strength polypropylene polymer. compound with indoor grad uv resistance and pressed fitted with tubular frame. size: ( w ) 52.5cm* ( d ) 55.8cm* ( h ) 84.5cm* ( scat h ) 45.0 cm seat size 52.5cm ( w ) *53.2 cm ( d ) back size 51.6 cm ( w ) *40.5 cm ( h ) . 40 3 faculty table office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side three drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock. 10 4 computer table computer table of size 600w x 450d x 750h mm compact and easy to use. top made up of 1.5 cm medium density fiber. all the other panels are made of particle board. vacuum lamination of pvc has been done on the table to surface. 0.4mm lapping is used for all the other panels. 40 5 seminar hall chair seminar chair with under structures could be revolving or fixed type as per need. option of hinge type and retractable desk let. smchr desklet 100% voc free powder coating knockdown design reducing transportation emissions designed for long life. 75 6 lab table long table of size 1800 x 900 x 740 worktop 25 mm thick plb tops with 2mm thick pvc edge beading under structure c frames legs 1.6 mm thick m.s c frame supporting the top. legs dia. 38.1 x 1.6 mm thick m.s erw tube. 25 7 lab table chemistry lab table of size 4130mm x 1540mm x 900mm with pp drop sink of size 560 x 355, single tap deck mounted 8 swing goose neck, ss peg board 550x420x55 with 25 pegs. two reagent shelves of width 1050 with glass shelf. c frames all c frames assemblies should be manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 ( indian standard specification for steel tubes for furniture ) and all sheet metal components should be of crca confirming to 1s code 513:1994. the suspended under bench welded units should be supported on heavy duty steel frames fully carrying the load of worktops. c frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. the c frame shall also have skirting at back bottom side. horizontal members should be made from rectangular pipes of 2mm thickness. 1 8 notice board notice board with size 4 x 3 surface material woollen felt / fabric in various colours, core material 9 mm thick soft board, backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour or 0.16 to 0.25 mm thick isi mark gp sheet, aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is: 1285 2002 16 mm thickness. 15 9 white board with tripod stand non magnetic small white board 4 x 3 surface material 0.62 to 0.72 mm thick laminate sheet with extra melamine surface, core material 8 mm thick particle board, backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour, aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is: 1285 2002 – 16mm thickness. tripod stand made with alloy steel, style holder, powder coated....

East Central Railway - Bihar

34965271 supply of fibre window glassfibre window glass, fibre window glass thickness 6mm transparent including rubber bidding with aluminium frame size 820mm x 460mm with locking plates mentioned as item no. 9 & item no. 10 in drg. no. emu / 4c / asr 5 4 402 alt g...

Employees State Insurance Corporation - Bihar

34832326 empanelment of supplier for orthopedic implants e tender for invitation for empanelment of supplier for orthopedic implants for a period of two years , electrical items : , 1a dcp plates 1.5mm (2 8) holes ss , 1b 1.5 mm cortical screws l 6mm 20mm ss , 2a dcp plates 2.0mm ( 2 8) holes ss , 2b 2.0mm cortical screws l 6mm 20mm ss , 3a dcp plates 2.7mm (2 12) holes ss , 3b 2.7mm cortical screws l 6mm 20mm ss , 4a small dcp plate 3.5mm for fore arm (4 10 holes) ss , 4b 3.5mm cortical screws l 10mm 30mm ss , 5a narrow dcp 4.5mm plate (5 14 holes) ss , 5b 4.5mm cortical screws l 10mm 40mm ss , 6a broad dcp plate 4.5mm (6 18 holes) ss , 6b 4.5mm cortical screws l 20mm 60mm ss , 7a dcp plates 1.5mm (2 8) holes ,titanium , 7b 1.5 mm cortical screws l 6mm 20mm ,titanium , 8a dcp plates 2.0mm ( 2 8) holes, titanium , 8b 2.0mm cortical screws l 6mm 20mm titanium , 9a dcp plates 2.7mm (2 12) holes ,titanium , 9b 2.7mm cortical screws l 6mm 20mm titanium , 10a small dcp plate 3.5mm for forearm (4 14 holes) ,titanium , 10b cortical screw 3.5 mm ,l 10 30 mm, titanium , 11a narrow dcp 4.5mm plate (5 12 holes) ,titanium , 11b cortical screw 4.5 mm ,l 20 60 mm, titanium , 12a broad dcp plate 4.5mm (5 14 holes) ,titanium , 12b cortical screw 4.5 mm ,l 20 60 mm, titanium , 13a lc dcp 3.5mm, (4 12) holes ,ss , 13b 3.5mm cortical screws l 10mm 30mm ss , 14a narrow lc dcp 4.5mm 4 holes to 16 holes, ss , 14b 4.5mmcortical screws l 10mm 40mm, ss , 15a broad lc dcp 4.5mm 6holes to 18 holes, ss , 15b 4.5mm cortical screws l 20mm 60mm ss , 16a lc dcp 3.5mm, (4 12) holes ,titanium , 16b 3.5mm cortical screws l 10mm 30mm ,titanium , 17a narrow lc dcp 4.5mm 4 holes to 16 holes, titanium , 17b 4.5mm cortical screws l 10mm 40mm ,titanium , 18a broad lc dcp 4.5mm 6holes to 18 holes, titanium , 18b 4.5mm cortical screws 20mm 60mm l, titanium , 19a lcp 3.5mm, (4 12) holes, ss , 19b 3.5 mm locking head self tapping screw ,l 10mm 30mm ,ss , 19c 3.5 mm self tapping cortical screw ,l 10mm 30mm ,ss , 20a lcp 3.5mm, (4 12) holes, titanium , 20b 3.5 mm locking head self tapping screw ,l 10mm 30mm ,titanium , 20c 3.5 mm self tapping cortical screw ,l10mm 30mm ,titanium , 21a lcp 4.5, narrow, 4 holes to 16 holes ,ss , 21b 5 mm locking self tapping screw, l 10mm 40mm ,ss , 21c 4.5 mm self tapping cortical screw ,l 10mm 40mm ,ss , 22a lcp 4.5, narrow, 4 holes to 16 holes ,titanium , 22b 5 mm locking screw, l 10mm 40mm ,titanium , 22c 4.5 mm self tapping cortical screw ,l 10mm 40mm ,titanium , 23a lcp 4.5, broad, 6 18 holes ,ss , 23b 5 mm locking head self tapping screw , l 20 60 mm ,ss , 23c 4.5 mm self tapping cortical screw ,l 20 60 mm, ss , 24a lcp 4.5, broad, 6 18 holes ,titanium , 24b 5 mm locking head self tapping screw ,20 60 mm l, titanium , 24c 4.5 mm self tapping cortical screw ,l 20 60 mm ,titanium , 25a lcp 4.5/5, broad curved, 12 26 holes left & right for femur, ss , 25b 5 mm locking head self tapping screw , l 20 60 mm ,ss , 25c 4.5 mm self tapping cortical screw , l 20 60 mm ,ss , 26a lcp 4.5/5 , broad curved, 12 26 holes left & right for femur, titanium , 26b 5 mm locking head self tapping screw, l 20 60 mm ,titanium , 26c 4.5 mm self tapping cortical screw ,l 20 60 mm ,titanium , 27 spacer for lcp (titanium) 3.5 mm dia , 28 spacer for lcp (titanium) 4.5/5.0 mm dia , 29a small t plate, right angled for distal radius 3.5mm, (3 6) holes, ss , 29b cortical screw 3.5 mm , l 8 40 mm, ss , 30a small t plate, oblique angled plate for distal radius, 3.5mm ,(3 5)holes, ss , 30b cortical screw 3.5 mm ,l 8 40 mm, ss , 31a distal radius volar medial column locking plate 2.4 mm, ss , 31b distal radius dorsal t locking plate 2.4 mm, ss , 31c distal radius dorsal locking plate 2.4 mm, ss , 31d radial styloid locking plate 2.4 mm, ss , 31e locking screw 1.8 mm, l 18 40 mm, ss , 31f locking screw 2.4 mm ,l 8 40 mm, ss , 31g non locking screw 2.4 mm, l 8 40 mm, ss , 31h cortical screw 3.5 mm with head 2.7 mm, l 8 40 mm, ss , 32a lcp t plate 3.5mm, right angled, 3 6holes , for distal radius, titanium , 32b lcp t plate 3.5mm, oblique angled, right/left, 3 6holes , for distal radius, titanium , 32c 3.5 mm self tapping cortical screw, l 6 30 mm, titanium , 32d 3.5 mm locking head screw, l 6 30 mm, titanium , 33a lcp distal radius plate 2.4mm,straight,5 and 6 holes, for dorsal plating, titanium , 33b lcp distal radius l plate 2.4mm,left and right angled, shaft 3 and4,head 3 holes, for dorsal plating, titanium , 33c lcp distal radius t plate 2.4mm,left and right angled, shaft 3 and4,head 3 holes, for dorsal plating, titanium , 33d lcp distal radius l plate 2.4mm,oblique,left and right angled, shaft 3 and4,head 3 holes, for dorsal plating, titanium , 33e lcp distal radius t plate 2.4mm,oblique,left and right angled, shaft 3 and4,head 3 holes, for dorsal plating, titanium , 33f lcp distal radius plate 2.4mm,left and right ,shaft 3 to 5 holes, head 5 holes, for intra articular volar fractures, titanium , 33g lcp distal radius plate 2.4mm,extra articular,left and right ,shaft 3 and 5,head 4 and 5 holes, titanium , 33h lcp distal radius plate 2.4mm,extra long, shaft 8 to12 holes, head 4 holes, titanium , 33i cortex screws dia 2.4mm,self tapping, l 14 40mm,titanium , 33j locking screws 2.4 mm self tapping l 6 30mm ,titanium , 33k 3.5 mm self tapping cortical screw, l 6 30 mm, titanium , 33l 3.5 mm locking head self tapping screw, l 6 30 mm, titanium , 34a 34a variable angle lcp two column distal radius plate 2.4 mm, 6 7 holes in head and 2 4 holes in shaft, titanium , 34b variable angle lcp volar rim plate 2.4 mm for distal radius with 6 holes in head 5 holes in shaft, titanium. , 34c 2.4mm variable angle locking screws, l 10 30 mm, titanium , 34d 2.4mm self tapping locking screws, l 10 30 mm, titanium , 34e cortical screw 2.7 mm self tapping l 10 30 mm, titanium , 35a locking distal ulna plate with hook ,titanium , 35b cortical screw self tapping 2 mm l 8 30 mm, titanium , 35c locking head screw self tapping 2mm l 8 30mm,titanium , 36a strut plates 1.5mm ,titanium , 36b t plates 1.5mm ,titanium , 36c y plate 1.5 mm, titanium , 36d 1.5 mm cortical screw, titanium , 37a locking t plate 2mm,titanium , 37b locking straight plate 2.0 mm ,titanium , 37c locking condylar plate2 .0 mm ,titanium , 37d 2 mm locking cortical screw, titanium , 38a locking t plate 2.4 mm, titanium , 38b locking straight plate 2.4 mm ,titanium , 38c 2.4 mm cortical screw, titanium , 38d 2.4 mm locking head screw, titanium , 39a calcaneal plate 3.5mm, l 60mm 70mm ,ss , 39b 3.5 mm cortical screw , l 10mm 30mm ,ss , 40a locking plate for calcanium, titanium , 40b locking screws 2.4 mm, l 10 30 mm, titanium , 40c locking screws 2.7 mm, l 10 30 mm, titanium , 40d locking screws 3.5 mm, l 10 40 mm, titanium , 41a locking x plate for hallex valgus osteotomy, titanium , 41b locking screw 2.7 mm(head 2.4 mm)self tapping,10 30 mm, titanium , 42a quarter tubular plate 2.7 mm(4 6 holes)ss , 42b 2.7 mm cortical screw, l 10 30 mm, ss , 43a 1/3rd tubular plate 3.5 mm, (2 12) holes, ss , 43b 3.5 mm cortical screw, l 10 30 mm, ss , 44a 1/3rd tubular locking plate ,3.5 mm, (2 12) holes, ss , 44b 3.5 mm locking head screw l 6 30 mm, ss , 45a semi tubular plates 4.5mm, 2holes to 12 holes, ss , 45b cortical screw 4.5mm, l 20 60 mm , ss , 46 t buttress plate 4.5mm (4 8) holes, ss , 47 l buttress plates 4.5mm, 3 8 holes, right/left leg , ss , 48 t buttress plate 4.5mm, 3 12 holes, titanium , 49 l buttress plate 4.5mm, 3 8 holes, right/left leg, titanium , 50 y reconstruction plates 3.5mm ,ss , 51 reconstruction plate 3.5 mm (5 22 holes),ss , 52 reconstruction plate 4.5 mm (5 22 holes),ss , 53 straight pelvic reconstruction plate 3.5mm(5 22) holes, ss , 54a lcp reconstruction plate 3.5mm, straight w/combined hole, 5 14holes, titanium , 54b 3.5 mm self tapping cortical screw, l 20 60 mm, titanium , 54c 3.5 mm locking head self tapping screw, l 20 60 mm, titanium , 55a reconstruction plate 3.5 mm low profile, 6 16 holes, curved, ss , 55b reconstruction plate 3.5 mm low profile, 3 20 holes, straight ,ss , 55c reconstruction plate 3.5 mm low profile, 10 16 holes, j shaped, ss , 55d pelvic cortex screw 3.5 mm self tapping with head height 2.75 mm ,l 40 90,ss , 55e pelvic cortex screw 3.5 mm self tapping with head height 2.75 mm ,l 90 150,ss , 56a spring plate, 1 3 holes, length 195 mm, 315 mm, 435 mm, ss , 56b 3.5 mm cortical screw for spring plate, l 20 40mm ss , 57a proximal humeral locking plate 3.5mm, holes(4 10), left & right ,ss , 57b 3.5 mm cannulated locking screw 20 60 mm, ss , 57c 3.5 mm cannulated non locking screw 20 60 mm, ss , 57d 3.5 mm locking screw 12 60 mm, ss , 57e 3.5 mm cortical screw 12 60 mm, ss , 58a proximal humeral locking plate with multi directional screw placement through same hole , holes(4 8), titanium , 58b cancellous screw 4.5 mm, l 20 60 mm, titanium , 58c cannulated cancellous screw 4.5 mm, l 20 60 mm, titanium , 58d multi directional cortical screw 4 mm ,l 14 60 mm, titanium , 58e cannulated screw 4 mm ,l 14 60 mm, titanium , 58f cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , 59a periarticular proximal humerus locking plate 3.5 mm (2 6 hole)left & right, titanium , 59b locking head screw 3.5 mm, l 10 60 mm, titanium , 59c cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , 60a distal humerous locking plate 3.5 mm medial ,left & right, 5 8 holes, ss , 60b distal humerous locking plate lateral ,left & right, 5 8 holes, ss , 60c cortical screw 2.7 mm, l 10 60 mm, ss , 60d locking head cortical screw 2.7 mm, l 10 60 mm, ss , 60e 3.5mm cortical screws with head 2.7 mm, l 20 40 mm, ss , 60f 3.5mm cortical screws with locking head 2.7 mm, l 20 40 mm, ss , 61a lcp distal humerus plate 2.7/3.5mm dorsolateral with and without support for lateral condyle right or left, holes(3 14), titanium , 61b lcp distal humerus plate 2.7/3.5mm medial, right or left, holes(3 14) ,titanium , 61c locking screw 2.7 mm(head 2.4) self tapping , l 14 60 mm, titanium , 61d locking head screw 3.5 mm, l 10 60 mm, titanium , 61e cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , 62a locking distal humerus extra articular plate, 6 10 combi holes, ss , 62b locking head screw 3.5 mm, l 10 60 mm, ss , 62c cortical self tapping screw 3.5 mm, l 10 60 mm, ss , 63a lcp distal humerus extra articular plate, 6 10 combi holes, titanium , 63b locking head screw self tapping 3.5 mm, l 10 60 mm, titanium , 63c cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , 64a distal medial femoral locking plate ,4.5/5 mm left/right,(6 18 holes),ss , 64b locking head screw self tapping 5 mm, l 20 80 mm, ss , 64c cancellous self tapping screw 5 mm, l 20 70 mm, ss , 65a distal medial femoral locking plate ,4.5/5 mm left/right,(6 18 holes),titanium , 65b locking head screw self tapping 5 mm, l 20 80 mm, titanium , 65c cancellous self tapping screw 5 mm, l 20 70 mm, titanium , 66a distal lateral femoral locking plate ,4.5/5 mm left/right, (6 18 holes),ss , 66b locking head screw self tapping 5 mm, l 20 80 mm, ss , 66c cortical self tapping screw 4.5 mm, l 20 70 mm, ss , 67a lcp for lateral distal femur 4.5mm, 5 to 13 holes, right and left, titanium , 67b locking head screw self tapping 5 mm, l 20 80 mm, titanium , 67c cortical self tapping screw 4.5 mm, l 20 70 mm, titanium , 68a 68a proximal lateral tibial locking plate 4.5/5 mm, left/right (4 14 holes), ss , 68b cannulated locking screw 5.5 mm, l 20 80 mm, ss , 68c cancellous screw 5.5 mm, l 20 70 mm, ss , 68d cortical screw 4.5 mm self tapping, l 20 70 mm, ss , 69a proximal lateral tibial locking plate 4.5/5 mm, left/right (4 14 holes),titanium , 69b locking head screw self tapping 5 mm, l 20 80 mm, titanium , 69c cancellous screw 6.5 mm, l 20 70 mm, titanium , 69d cortical screw 4.5 mm self tapping, l 20 70 mm, titanium , 70a lcp medial proximal tibial plate 3.5mm right/left shaft, 4 20mm holes, titanium , 70b lcp lateral proximal tibia plate , 3.5mm ,4 16mm holes, right/left, titanium , 70c locking head screw 3.5 mm, l 10 60 mm, titanium , 70d cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , 71a distal medial tibia locking plate 3.5 mm ,left & right (5 21 holes),ss , 71b locking head screw 3.5 mm, l 10 60 mm, ss , 71c cortical self tapping screw 3.5 mm, l 10 60 mm, ss , 71d cancellous locking screw 4 mm, ss. , 72a lcp anterolateral distal tibia plate 3.5mm, right or left, holes(5 21),titanium , 72b lcp distal medial tibia plate 3.5mm medial 4 14mm holes right/left, titanium , 72c locking head screw 3.5 mm, l 10 60 mm, titanium , 72d cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , 73a distal lateral fibular locking plate (4 10 holes)titanium , 73b locking head screw 3.5 mm, l 10 30 mm, titanium , 73c cortical self tapping screw 3.5 mm, l 10 30 mm, titanium , 74a metaphyseal plate 3.5mm ,titanium , 74b locking head screw 3.5 mm, l 10 60 mm, titanium , 74c cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , 75a metaphyseal plate 4.5/3.5 mm for metaphyseal fractures. titanium , 75b locking head screw 3.5 mm, l 10 60 mm, titanium , 75c cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , 75d locking head screw self tapping 5 mm, l 20 80 mm, titanium , 75e cortical self tapping screw 4.5 mm, l 20 70 mm, titanium , 76 angled blade plates 130 ° blade for femoral angular osteotomy, l (50mm 95mm) 4 9 holes, ss , 77 90° osteotomy plate 4 holes, ss , 78 condylar blade plate 95°,5 18 holes, ss , 79 osteotomy plate medial high tibia, 3 and 4 holes, right and left, titanium , 80 lcp for pediatric proximal femur varus osteotomy 3.5 and 5 mm ,ss , 81 lcp for pediatric proximal femur valgus osteotomy 3.5 and 5 mm, ss , 82a lcp for pediatric distal femur osteotomy and fractures 3.5 and 5 mm ,ss , 82b locking head screw 3.5 mm, l 10 60 mm, ss , 82c cortical self tapping screw 3.5 mm, l 10 60 mm, ss , 82d locking head screw self tapping 5 mm, l 20 80 mm, ss , 82e cortical self tapping screw 4.5 mm, l 20 70 mm, ss , 83 figure of eight (8) plate for epiphysiodesis, with two corresponding screws ,ss , 84 figure of eight (8) locking plate for epiphysiodesis with two corresponding screws ,titanium , 85a clavicle locking plate 3.5 mm, ss , 85b locking head screw 3.5 mm, l 10 40 mm, ss , 85c cortical self tapping screw 3.5 mm, l 10 40 mm, ss , 86a clavicle locking plate 3.5 mm, titanium , 86b locking head screw 3.5 mm, l 10 40 mm, titanium , 86c cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , 87a clavicle hook plate 3.5mm right/left 6 holes, hook l 15 to 18mm, ss , 87b cortical screw 3.5 mm, l 10 40 mm, ss , 88a lcp clavicular hook plate 3.5mm right and left (4 8)holes , hook 12 18mm, titanium , 88b locking head screw 3.5 mm, l 10 40 mm, titanium , 88c cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , 89a variable angle locking clavicle anterior plate 3.5 mm, titanium , 89b 3.5 mm locking variable angle screws, l 16 30mm ,titanium , 89c cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , 90a lc lcp wrist fusion plate2.4/3.5, standard bend, titanium , 90b locking head screw 2.4 mm, l 10 40 mm, titanium , 90c cortical self tapping screw 2.4 mm, l 10 40 mm, titanium , 90d locking head screw self tapping 3.5 mm, l 10 40 mm, titanium , 90e cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , 91a lc lcp wrist fusion plate2.4/3.5, standard bend, titanium , 91b locking head screw 2.4 mm, l 10 40 mm, titanium , 91c cortical self tapping screw 2.4 mm, l 10 40 mm, titanium , 92a lcp olecranon plate 3.5mm ,left/right, holes(2 12) ,titanium , 92b locking head screw self tapping 3.5 mm, l 10 40 mm, titanium , 92c cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , 93a lcp olecranon hook plate 3.5 mm,2 10 holes, titanium , 93b locking head screw self tapping 3.5 mm, l 10 40 mm, titanium , 93c cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , 94a proximal ulnar locking plate 3.5 mm, 3 9 holes, ss , 94b locking head screw self tapping 3.5 mm, l 10 40 mm, ss , 94c cortical self tapping screw 3.5 mm, l 10 40 mm, ss , 95a dhs plate 130°,135°,150° ,barrel length 38mm (4 10)holes, ss , 95b dhs plate 135°, barrel length 25mm (4 6)holes, ss , 95c dhs/dcs lag screw 12.5/8.0mm, l 50mm 115mm, ss , 95d dhs/dcs compression screw 4.0mm, l 36mm, ss , 95e cortical screw 4.5 mm, l 20 70 mm, ss , 96 dhs trochanter stabilizing plate , ss , 97a lcp dhs plate 130°,135°,150° ,barrel length 38mm, 2 6 holes, titanium , 97b lcp dhs plate 135°, barrel length 25mm (4 6)holes, titanium , 97c lcp dhs/dcs screw 12.5/8.0mm, l 50mm 115mm, titanium , 97d helical blade for lc dhs ,12.5 dia, l 65 115 mm, titanium , 97e dhs/dcs compression screw 4.0mm, l 36mm,titanium , 97f locking device for lag dhs, 35 mm, titanium , 97g locking cortical screw 5 mm ,l 20 60 mm, titanium , 97h self tapping cortical screw 4.5 mm ,l 20 60 mm, titanium , 98a cable plates 6 10 hole, for peri prosthetic fractures, ss , 98b cable assembly with cerclage dia. 1.8 mm, ss , 98c cable for plate dia . 1.8 mm, ss , 98d cable needle assembly, dia. 1.3 mm , 98e cortical bone screw 4.5 mm for use with cable plate , 98f hex button 3.5 mm for use with 4.5 & 6.5 mm screw, ss , 98g cable pin (2 in no.) 1.3 mm ,l 35 65 mm. , 98h cable pin crimpar assembly , 99a locking attachment plate for peri prosthetic fractures 4 & 8 hole,3.5 mm, titanium , 99b locking head screw self tapping 3.5 mm, l 10 60 mm, titanium , 99c cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , 99d connecting screw, 5 mm ,l 10 40 mm , 100a trochanteric fixation plate with option of multiple screw & screw cerclage wire, various sizes, titanium. , 100b cortical screw 3.5 mm, l 10 50 mm, titanium. , 100c cortical screw 4.5 mm, l 14 60 mm, titanium. , 100d cancellous screw 4 mm short thread, l 20 60 mm, titanium. , 100e cancellous screw 4 mm full thread, l 20 60 mm, titanium. , 100f cerclage cable co cr. , 101a reconstruction femoral nail 9.0mm to 12mm dia, right/left, l (340 440)mm, titanium , 101b hip screw 6.5mm, l (75 110)mm, titanium , 101c end cap, cannulated , l 0mm 15mm, titanium , 101d locking bolt , self tapping, l 26 mm 68mm for recon nail, titanium , 101e washer 12.0/6.5mm dia.,2.5mm thick, titanium , 102a proximal femoral nail 9 mm 13 mm dia. long, right/left, l (200mm 380mm), titanium , , 102b femoral neck screw 11.0mm dia,l 80mm 115mm, titanium , 102c hip screw 6.5mm , l 70mm 105mm,titanium , 102d locking bolt , self tapping, l 26 mm 68mm for proximal femur nail, titanium , 103a proximal femoral nail with anti rotation for short stature and osteoporotic bones 9.0 12mm, l 170mm 420mm, right/left, titanium , 103b helical blade for proximal femoral nail ,l 75mm to 120mm, titanium , 103c end cap for proximal femoral nail, l 0 15mm extension , 103d locking bolt , self tapping, l 26 mm 68mm for proximal femur nail, titanium , 104a antigrade proximal femoral nail with one proximal hole should have a locking option from greater trochanter to lesser trochanter. dia 8 16 mm length 240 500mm,ss , 104b end cap for antigrade femoral nail 12.0mm, extension 0mm 15mm, ss , 104c proximal locking screw , ss , 104d distal locking screw , ss , 105a antigrade femoral nail with one proximal hole should have a locking option from greater trochanter to lesser trochanter. dia 8 16 mm length 240 500mm,titanium , 105b end cap for antigrade femoral nail 12.0mm, extension 0mm 15mm,titanium , 105c proximal locking screw , titanium , 105d distal locking screw , titanium , 106a cannulated interlocking femoral nail ,dia. 9mm 13mm ,l 340 440mm,ss , 106b inter locking bolt, ss , 106c end cap, ss , 107a unreamed solid femoral nail , 9.0 10 mm dia., l 280mm 480mm, titanium. , 107b inter locking bolt, titanium. , 107c end cap, titanium. , 108a cannulated interlocking femoral nail 09.0mm 13.0mm dia.,l 280mm 480mm,titanium. , 108b end cap ,titanium , 108c locking bolts ,titanium , 109a supra condylar femoral fracture nail 9.0mm dia.,l 160mm 340mm, solid, titanium , 109b supra condylar femoral fracture nail 9 mm to12mm dia.,cannulated,l 200mm 380mm, titanium , 109c distal locking screw , titanium , 109d spiral blade l (60mm 80mm) ,titanium , 109e proximal locking screw 6 mm, self tapping, titanium , 109f end cap for nail using locking screw and spiral blades, titanium , 110a retrograde femoral nail dia 9 14 mm, l 140 480 mm, ss , 110b distal locking bolt ,ss , 110c proximal locking bolt ,ss , 110d end cap for retrograde nail, ss , 111 femur expandable nail initial dia 8.5mm expandable upto 13.5mm, len 32cm to 46cm(increment 2cm) for antegrade/ rotrograde insertion with or without proximal locking , 112 kuntcher clover leaf i/m nail 6mm 14mmdia., length 20cms to 48cms (1cm increment) , 113a unreamed solid tibial nail 8.0mm 9.0mm dia.l 285mm 380mm, titanium , 113b end caps for tibial nails, titanium , 113c locking bolt ,titanium , 114a cannulated interlocking tibial nail 8 11 mm dia.l 300mm 400mm, titanium , 114b end caps for tibial nails, titanium , 114c locking bolt , self tapping, titanium , 115a cannulated interlocking tibial nail 8mm 12mm l 200mm to 400mm, ss , 115b end caps , ss , 115c locking bolt , ss , 116a multi directional tibial nail, dia 8mm 10mm,l 285 405mm for all fractures of tibia ,titanium , 116b locking screw 4.0mm and 5.0mm, l 18 60mm, for multi directional nails, titanium , 116c cancellous bone locking screw 5.0mm with dual core, self tapping,l 30 50mm,titanium , 116d end cap for multi directional tibial nail, extension 0 15mm, titanium , 117 tibial expandable nail initial dia 8.5mm for length 30 38 cms expanded upto 13.5mm for antegrade insertion with or without proximal locking. , 118a unreamed humeral nail , various sizes, titanium , 118b spiral blade for unreamed humeral nail, titanium , 118c locking bolts , self tapping, l 16mm 48mm for humerus nailing, titanium , 119a proximal humeral naii various sizes, titanium , 119b spiral blade for phn, titanium , 119c locking bolts , self tapping, titanium , 119d end caps with 0mm 15mm extension, titanium , 120a humerus inter locking nail various sizes , ss , 120b locking bolt, ss , 120c end cap, ss , 121a humerus inter locking nail various sizes ,titanium , 121b locking bolt, titanium , 121c end cap, titanium , 122 square nail for radius and ulna 1.5 ,2.0 ,2.5 mm dia., 17cms to 30 cms length (1cm increment) , 123 square nail for radius and ulna 3mm,3.5mm dia., 17cms to 30 cms length (1cm increment) , 124 elastic nail 2.0,2.5,3 mm dia. , l 440mm, titanium , 125 elastic nail 3.5 4.0 mm dia. , l 440mm, titanium , 126 ender nail, dia 6 12 mm, various length, ss , 127 injectable bone substitutes 100% nano crystal hydroxy apetite (ha) bone paste ,1 ml. , 128 injectable bone substitutes 100% nano crystal hydroxy apetite (ha) bone paste ,2 ml. , 129 injectable bone substitutes 100% nano crystal hydroxy apetite (ha) bone paste ,5 ml. , 130 injectable bone substitutes, b tricalcium phosphate and hylonorate solution with needle10g and 12g for injectable bone substitute,10cc , 131 b tri calcium phosphate granules 1.4 2.8mm/porosity 60% bone substitutes,5.0g , 132 b tri calcium phosphate granules 1.4 2.8mm/porosity 60% bone substitutes,10.0g , 133 b tri calcium phosphate granules 1.4 2.8mm/porosity 60% bone substitutes,20.0g , 134 b tri calcium phosphate cylinder,10.5mm dia, l 25mm bone substitutes , 135 b tri calcium phosphate wedge, angle 14 ,25x20mm bone substitutes , 136 b tri calcium phosphate wedge, angle 28 ,25x20mm bone substitutes , 137 b tri calcium phosphate wedge, angle 22 ,25x20mm bone substitutes , 138 b tri calcium phosphate wedge, angle 26 ,25x20mm bone substitutes , 139 b tri calcium phosphate wedge, half round, 7° angle ,for tibial osteotomy bone substitutes , 140 b tri calcium phosphate wedge, half round, 10° angle ,for tibial osteotomy bone substitutes , 141 b tri calcium phosphate wedge, half round, 13° angle ,for tibial osteotomy bone substitutes , 142 cerclage wire with eye , dia. 1mm,1.25mm,1.5 mm l 280 to 600mm,ss , 143 cerclage wire tightener . , 144 wire mount for lcp 4.5/5.0 mm, titanium , 145 s.s. wires: 16 ,18 ,20 ,22 ,24 gauge.146 , 146 giggli wire , 147 giggli wire handle , 148 steinman pins dia.,3mm,3.5mm.,4mm,x 150, 175,200, 225 mm length, ss , 149 steinman pins dia.,4.5mm,5mm x 150, 175,200, 225 mm length, ss , 150 denham pins dia.,3mm,3.5mm.,4mm, x 150, 175,200, 225 mm length, ss , 151 denham pins dia.,4.5mm,5mm x 150, 175,200, 225 mm length, ss , 152 k wire, dia. 0.6mm, l 70mm,ss , 153 k wire, dia. 0.8 mm l 150mm,ss , 154 k wire with trocar tip , dia. 1.4mm,1.6mm,1.8mm, 2.0mm,l 150mm ,ss , 155 k wire with trocar tip , dia. 2.5mm,3.0 mm ,l 150mm ,ss , 156 k wire with trocar tip dia. 1.4mm,1.6 mm,1.8mm,2.0mm , l 280mm,ss , 157 k wire with trocar tip dia. 2.5mm,3.0 mm ,l 280mm,ss , 158 k wire double tip, dia. 1.4mm,1.6mm,1.8mm,2.0mm, l 150 300 mm, ss , 159 k wire double tip, dia. 2.5mm,3.0 mm l 150 300mm,ss , 160 k wire with threaded tip, dia. 1.25mm,1.6mm,2.5mm l 150mm,ss , 161 guide wire with spade point dia.1.5mm,1.6mm,2.0mm l 150 to300mm,ss , 162 guide wire with trocar tip dia.1.25mm,2.0mm l 200 to 230mm,ss , 163 guide wire graduated (threaded) 1.25 mm dia. ,ss , 164 cortical screws 1mm dia, length 2mm to 20mm (2mm increments)ss , 165 cortical screws 1.5mm dia, length 2mm to 20mm (2mm increments)ss , 166 cortical screws 2mm dia, length 2mm to 20mm (2mm increments)ss , 167 cortical screws 2.5mm dia, length 2mm to 20mm (2mm increments)ss , 168 cortical screws 2.7 mm dia, length 6mm to 20 mm (2mm increments)ss , 169 cortical screws 2.7 mm dia, length 22 mm to 40 mm (2mm increments)ss , 170 cortical screws 3.5 mm dia, length 10mm to 40 mm (2mm increments)ss , 171 cortical screws 3.5 mm dia, length 45mm to 80 mm (5mm increments)ss , 172 cortical screws 3.5 mm dia, length 10mm to 40 mm (2mm increments), titanium , 173 cortical screws 3.5 mm dia, length 45mm to 80 mm (5mm increments), titanium , 174 cortical screws 4.5 mm dia, length(10mm to 40 mm ) (2mm increments),ss , 175 cortical screws 4.5 mm dia, length(42mm to 80 mm ) (2mm increments),ss , 176 cortical screws 4.5 mm dia,(10mm to 40 mm )(2mm increments),titanium , 177 cortical screws 4.5 mm dia,(42mm to 80 mm )(2mm increments),titanium , 178 cortical screws self tapping, 1 mm dia, length 2mm to 20 mm (2mm increments)ss , 179 cortical screws self tapping,1.5 mm dia, length 2mm to 20 mm (2mm increments)ss , 180 cortical screws self tapping,2 mm dia , length 2mm to 20 mm (2mm increments)ss , 181 cortex screws dia 2.4mm,self tapping, l14 40mm,ss , 182 cortical screws self tapping,2.5 mm dia, length 2mm to 20 mm (2mm increments)ss , 183 cortical screws self tapping,2.7 mm dia, length 6mm to 30 mm (2mm increments)ss , 184 cortical screws self tapping,3.5 mm dia, length 10mm to 40 mm (2mm increments)ss , 185 cortical screws self tapping,3.5 mm dia, length 45mm to 85 mm (5mm increments)ss , 186 cortical screws self tapping,4.5 mm dia, ( 10mm to 40 mm )ss , 187 cortical screws self tapping,4.5 mm dia, short threaded ( 42mm to 80 mm )ss , 188 cortical screws self tapping,4.5 mm dia, short threaded ( 82mm to 140 mm )ss , 189 cortical screw 1mm l (6 14)mm, self tapping, titanium , 190 cortical screw 1.3mm l (6 18)mm, self tapping, titanium , 191 cortical screw 1.5mm l (6 24)mm, self tapping, titanium , 192 cortical screw 2.0mm l (6 38)mm, self tapping, titanium , 193 cortical screw 2.4mm l (6 40)mm, self tapping, titanium , 194 cortical screw 2.7mm l (6 40)mm, self tapping, titanium , 195 cortical screw 3.5mm length 10 30mm self tapping (titanium) , 196 cortical screw 3.5mm length 32 60mm self tapping (titanium) , 197 cortical screw 4.5mm length 10 40mm self tapping (titanium) , 198 cortical screw 4.5mm length 42 80mm self tapping (titanium) , 199 cancellous screws self tapping fully threaded, 3.5 mm dia, length 10mm to 30mm (2mm increments)ss , 200 cancellous screw self tapping fully threaded, 3.5mm dia, length 35mm to 60mm (5mm increment)ss , 201 cancellous screw self tapping fully threaded, 3.5mm dia, length 65mm to 105mm (5mm increment)ss , 202 cancellous screws self tapping fully threaded ,3.5 mm dia, length 10mm to 30mm (2mm increments)titanium , 203 cancellous screw self tapping fully threaded, 3.5mm dia, length 35mm to 60mm (5mm increment)titanium , 204 cancellous screw self tapping fully threaded, 3.5mm dia, length 65mm to 105mm (5mm increment)titanium , 205 cancellous bone screws 4.0mm,fully threaded l (10mm 60mm)with 2mm increment, ss , 206 cancellous bone screws 4.0mm ,partially threaded l (10mm 58mm)with 2mm increment, ss , 207 cancellous bone screws 4.0mm ,partially threaded l (60mm 90mm), ss , 208 cancellous screws 4.0 mm dia (partially threaded) length 10mm to 30mm (2mm increments)titanium , 209 cancellous screws 4.0 mm dia (partially threaded) length 35mm to 60mm (5mm increments)titanium , 210 cancellous bone screw 4.0mm , fully threaded, l (10mm 60mm),titanium , 211 cancellous screws 6.5mm dia 16mm thread length 25mm to 70mm (5mm increments)ss , 212 cancellous screws 6.5mm dia 16mm thread length 75mm to 110mm (5mm increments)ss , 213 cancellous screws 6.5mm dia 32mm thread length 25mm to 70mm (5mm increments)ss , 214 cancellous screws 6.5mm dia 32mm thread length 75mm to 110mm (5mm increments)ss , 215 cancellous bone screws 6.5mm,fully threaded, l (20mm 110mm) with 5mm increments, ss , 216 cancellous screws 6.5mm dia 16mm threaded length 25mm to 70mm (5mm increments)titanium , 217 cancellous screws 6.5mm dia 16mm threaded length 75mm to 110mm (5mm increments)titanium , 218 cancellous screws 6.5mm dia 32mm partially threaded length 30mm to 70mm (5mm increments)titanium , 219 cancellous screws 6.5mm dia 32mm partially threaded length 75mm to 120mm (5mm increments)titanium , 220 cancellous screws 6.5mm , fully threaded length 45mm to 150mm (5mm increments)titanium , 221 malleolar screw 4.5mm l (25mm 70mm)with 5mm increment, ss , 222 malleolar screws 4.5 mm dia, length 25mm to 80mm (5mm increments), titanium , 223 cannulated cancellous screws 3.5 mm self drilling short thread, l 10mm 30mm (2mm increments)ss , 224 cannulated cancellous screws 3.5 mm self drilling full thread, l 10mm 30mm (2mm increments)ss , 225 cannulated cancellous screws 3.5 mm self drilling short thread, l 10mm 30mm (2mm increments)titanium , 226 cannulated cancellous screws 3.5 mm self drilling full thread, l 10mm 30mm (2mm increments)titanium , 227 cannulated cancellous screws 4 mm dia short thread 20mm 60mm (2mm increments)ss , 228 cannulated cancellous screws 4 mm dia fully threaded 20mm 60mm (2mm increments)ss , 229 cannulated cancellous screws 4 mm dia short thread 20mm 60mm (2mm increments)titanium , 230 cannulated cancellous screws 4 mm dia fully threaded 20mm 60mm (2mm increments)titanium , 231 cannulated screw 4.5 mm short thread 20 to 60mm (2mm increments)ss , 232 cannulated screw 4.5 mm fully threaded 20 to 60mm (2mm increments)ss , 233 cannulated screw 4.5 mm short thread 20 to 60mm (2mm increments)titanium , 234 cannulated screw 4.5 mm fully threaded 20 to 60mm (2mm increments)titanium , 235 cannulated screw 6.5 mm short thread 30 to 60mm (5mm increments)ss , 236 cannulated screw 6.5 mm short thread 65 to 130mm (5mm increments)ss , 237 cannulated screw 6.5 mm fully threaded 30 to 60mm (5mm increments)ss , 238 cannulated screw 6.5 mm fully threaded 65 to 130mm (5mm increments)ss , 239 cannulated screw 6.5 mm short thread 30 to 60mm (5mm increments)titanium , 240 cannulated screw 6.5 mm short thread 65 to 130mm (5mm increments)titanium , 241 cannulated screw 6.5 mm fully threaded 30 to 60mm (5mm increments)titanium , 242 cannulated screw 6.5 mm fully threaded 65 to 130mm (5mm increments)titanium , 243 large cannulated cancellous screws 7.0 mm dia,16mm thread length 50mm to 120mm (5mm increament)ss , 244 large cannulated cancellous screws 7.0 mm dia 32mm thread length 50mm to 120mm (5mm increment)ss , 245 large cannulated cancellous screws 7.0 mm dia,16mm thread length 50mm to 120mm (5mm increament)titanium. , 246 large cannulated cancellous screws 7.0 mm dia 32mm thread length 50mm to 120mm (5mm increment)titanium , 247 locking screw dia 2.7mm (head 2.4), self tapping l 14mm to 60mm ,ss , 248 locking screw dia 2.7mm (head 3.5), self tapping l 20 mm to 60mm ,ss , 249 locking head screw 3.5mm, self tapping l (10mm 24mm)(2mm increment),ss , 250 locking head screw 3.5mm, self tapping l (26mm 48mm)(2mm increment),ss , 251 locking head screw 4.5mm self tapping size 16 85mm ss , 252 locking head screw 5.0 mm, l 10 48 mm (2mm increment)ss , 253 locking head screw 5.0 mm ,l 50 85 mm (2mm increment)ss , 254 locking head cancellous screw 5.0 mm ,l 50 85 mm (2mm increment)ss , 255 locking cancellous screw 6.5 mm, l 20 100 mm ss , 256 locking head screws 2.0mm self tapping l6 30mm titanium , 257 locking head screws 2.4 mm self tapping l6 30mm titanium , 258 locking screw dia 2.7mm (head 2.4), self tapping l 14mm to 60mm ,titanium , 259 locking screw dia 2.7mm (head 3.5), self tapping l 20 mm to 60mm ,titanium , 260 locking head screw 3.5mm, self tapping l (10mm 24mm)(2mm increment),titanium , 261 locking head screw 3.5mm, self tapping l (26mm 48mm)(2mm increment),titanium , 262 locking head screw 4.5mm self tapping size 16 85mm (titanium) , 263 locking head screw 5.0 mm l 10 48 mm (2mm increment)titanium , 264 locking head screw 5.0 mm l 10 48 mm (2mm increment),titanium , 265 locking head screw 5.0 mm l 50 85 mm (5mm increment),titanium , 266 locking head cancellous screw 5.0 mm l 50 85 mm (5mm increment),titanium , 267 cannulated locking head screw 5 mm, l 25 75 mm, ss , 268 cannulated locking head screw 5 mm, l 80 120 mm, ss , 269 cannulated locking head screw 5 mm, l 25 75 mm, titanium , 270 cannulated locking head screw 5 mm, l 80 120 mm, titanium , 271 locking cancellous screw 6.5 mm, l 20 60 mm, titanium , 272 locking cancellous screw 6.5 mm, l 65 100 mm ,titanium , 273 headless compression screws 2.4mm, self drilling, cannulated, length 9 30mm, titanium. , 274 headless compression screws 3 mm, self drilling, cannulated, length 10 40mm, titanium. , 275 headless compression screws short threaded 4.5 mm, selfdrilling, cannulated, length 20 60mm(increment of 2 mm), titanium. , 276 headless compression screws long threaded 4.5 mm, self drilling, cannulated, length 20 60mm(increment of 2 mm), titanium. , 277 headless compression screws short threaded 4.5 mm, self drilling, cannulated, length 65 80mm(increment of 5 mm), titanium. , 278 headless compression screws long threaded 4.5 mm, self drilling, cannulated, length 65 80mm(increment of 5 mm), titanium. , 279 headless compression screws short threaded 6.5 mm, self drilling, cannulated, length 20 60mm(increment of 2 mm), titanium. , 280 headless compression screws long threaded 6.5 mm, self drilling, cannulated, length 20 60mm(increment of 2 mm), titanium. , 281 headless compression screws short threaded 6.5 mm, self drilling, cannulated, length 65 100mm(increment of 5 mm), titanium. , 282 headless compression screws long threaded 6.5 mm, self drilling, cannulated, length 65 100mm(increment of 5 mm), titanium. , 283 shaft screw 3.5 mm ,l 12 60 mm, ss , 284 shaft screw 4.5 mm ,l 22 80 mm, ss , 285 washer for 4.0 mm cancellous screws, ss , 286 washer for 4.5 mm malleolar screws, ss , 287 washer for 6.5 mm cancellous screws, ss , 288 spiked washer for cancellous bone screw 6.5mm dia 13.5mm x 6mm, ss , 289 spiked washer for 4.0mm cancellous screw, ss , 290 washer 10 mm dia., titanium , 291 washer, 13.0 mm dia., titanium , 292 hemispherical washer for 6.5 mm screws, ss , 293 washer holding clip , 294 drill bit (stainless steel),1.0 mm , 295 drill bit (stainless steel) ,1.5 mm , 296 drill bit (stainless steel) ,2mm,l 85 mm ,2 flute , 297 drill bit (stainless steel) with quick coupling end,2.5mm, l 100 mm , 298 drill bit 2.5mm with quick coupling end, titanium. , 299 drill bit (stainless steel) 2.7mm ,2 flute with quick coupling end , 300 drill bit (stainless steel) 2.7mm 3 flute with quick coupling end , 301 drill bit (stainless steel) 3.2mm , 2 flute with quick coupling end , 302 drill bit (stainless steel) 3.2mm ,3 flute with quick coupling end , 303 drill bit (stainless steel) 3.5mm with quick coupling end , 304 drill bit (stainless steel) 4.5mm with quick coupling end , 305 drill bit (stainless steel) 3.5mm extra long , 306 2.8mm graduated drill bit for locking compression plate, ss , 307 cannulated drill bit 2.5 mm dia, ss , 308 cannulated drill bit 2.7 mm dia, ss , 309 cannulated drill bit 3.2 mm dia, ss , 310 cannulated drill bit 3.5 mm dia, ss , 311 cannulated drill bit 4.5 mm dia, ss , 312 cannulated drill bit 5.0 mm dia, ss , 313 bone tap with t handle 1.5mm , 314 bone tap with t handle 2.0mm , 315 bone tap with t handle 2.7mm , 316 bone tap with t handle 3.5mm , 317 bone tap with t handle 4.5mm , 318 bone tap with t handle 6.5mm , 319 cannulated bone tap 2.5 mm dia , 320 cannulated bone tap 3.5 mm dia , 321 cannulated bone tap 4.5 mm dia , 322 cannulated bone tap 6.5 mm dia , 323 cannulated bone tap 7.0 mm dia , 324a quick coupling handle. , 324b quick coupling bone tap,3.5 mm. , 324c quick coupling bone tap,4.5 mm. , 325 screw driver non canulated 2.0mm,hexagonal , 326 screw driver non canulated 2.7mm,hexagonal , 327 screw driver non canulated 3.5mm,hexagonal , 328 screw driver non canulated 4.5mm,hexagonal , 329 screw driver canulated 3.5mm,hexagonal , 330 screw driver canulated 4.5mm,hexagonal , 331 screw driver canulated 7.0mm,hexagonal , 332 screw driver star shaped 3.5 mm , 333 screw driver star shaped 4.5 mm , 334 torque limiting screw driver for 3.5mm locking head screw , 335 torque limiting screw driver for 4.5/5.0mm locking head screw , 336 quick coupling handle with quick coupling screw driver shaft ,3.5 mm , 337 quick coupling handle with quick coupling screw driver shaft ,4.5 mm , 338 u type staple 3mm dia 10mm 35mm length (at 5 mm increments) , 339 coventary staple 5mm,10mm,15mm step , 340 bone cement with low viscosity 20g. , 341 bone cement with medium viscosity 20g. , 342 bone cement with high viscosity 20g. , 343 bone cement with low viscosity 40g. , 344 bone cement with medium viscosity 40g. , 345 bone cement with high viscosity 40g. , 346 bone cement with gentamycin, low viscosity 20g. , 347 bone cement with gentamycin, medium viscosity 20g. , 348 bone cement with gentamycin, high viscosity 20g. , 349 bone cement with gentamycin, low viscosity 40g. , 350 bone cement with gentamycin,medium viscosity 40g. , 351 bone cement with gentamycin,high viscosity 40g. , 352 bone cement with gentamycin+clindamycin, 40g. , 353 bone cement with gentamycin+vancomycin, 40g. , 354 bone cement with tobramycin, 40g. , 355 bone cement mixing bawl with spatula, ss , 356 disposable cement gun. , 357a re usable cement gun with accessories (autoclavable). , 357b only accessories for cement gun. , 358a re usable cement gun with vacuum mixing (autoclavable). , 358b accessories for vacuum mixing cement gun. , 358c vacuum pump. , 360 gentamycin cement beads 3 to 5 mm dia. (10 beads) , 361 gentamycin cement beads 3 to 5 mm dia. (30 beads) , 362 gentamycin cement beads 7 to 9 mm dia. (10 beads) , 363 gentamycin cement beads 7 to 9 mm dia. (30 beads) , 364 a m prosthesis 37 mm to 57 mm with 2 mm increment , 365 fixed bipolar head with fenestrated femoral stem small/medium/large, ss , 366 bipolar hip prosthesis (talwarkar type) 37mm to 57mm with 2mm increment , 367a bipolar hip prosthesis (modular type)cobalt chrome cup & head various sizes with various neck length , 367b bipolar hip prosthesis (modular type) femoral stem various sizes, cemented , 367c cement restrictor , 367d stem centralizer , 368a non cemented bipolar hip prosthesis (modular type) cup & head various sizes with various neck length. , 368b non cemented bipolar hip prosthesis (modular type) ha coated femoral stem various sizes. , 369a non cemented bipolar hip prosthesis (modular type)cup & head various sizes with various size neck length. , 369b non cemented bipolar hip prosthesis (modular type) porous coated femoral stem various sizes. , 370a total hip acetabular cups various sizes , 370b total hip metal head dia 22,26,28mm with various neck length , 370c femoral stem various sizes. , 370d stem centralizer , 370e cement restrictor , 371a modular stem (stainless steel) small, medium, large ,double tappered, highly polished, collar less, self centering, variable offsets. , 371b modular internal head 22,26,28 mm (stainless steel) with various neck length. , 371c modular thr 10 degree acetabular cup with lpw: , 371d stem centralizer , 371e cement restrictor , 372a cementless hip system fully ha coated titanium alloy femoral stem with various sizes. , 372b cementless hip system metal head 28 mm with variable neck length. , 372c cementless hip system acetabular cup cementless poro coated with option of screws. , 372d cementless hip system acetabular highly crosslink poly cup liner with 10 degree lpw different sizes. , 372e bone screw to fix the cup. , 373a cementless hip system porous coated titanium alloy femoral stem with various sizes. , 373b cementless hip system metal head 28 mm with variable neck length. , 373c cementless hip system acetabular cup cementless poro coated with option of screws. , 373d cementless hip system acetabular highly crosslink poly cup liner with 10 degree lpw different sizes. , 373e bone screw to fix the cup. , 374a cementless hip system proximal ha coated titanium alloy femoral stem (double tappered) various sizes. , 374b cementless hip system metal head 28 mm with variable neck length. , 374c cementless hip system acetabular cup cementless ha coated with option of screws. , 374d cementless hip system acetabular highly crosslink poly cup liner with 10 degree lpw different sizes. , 374e bone screw to fix the cup. , 375a cementless hip system ha /poro coated femoral stem, various sizes. , 375b cementless hip system metal head 32,36 mm with variable neck length. , 375c cementless hip system acetabular cup ha/poro coated with option of screws, should accomodate 32,36 mm head with same cup. , 375d cementless hip system acetabular highly crosslink polycup liner with 10 degree lpw different sizes, should accommodate 32,36 head. , 375e bone screw to fix the cup. , 376a cementless hip system ha/poro coated femoral stem, different sizes. , 376b cementless hip system ceramic head(bilox delta) 32,36 mm with variable neck length. , 376c cementless hip system acetabular cup ha/poro coated with option of screws, should accommodate 32, 36 mm head with same cup. , 376d cementless hip system acetabular highly crosslink poly cup liner with 10 degree lpw different sizes, should accommodate 32, 36 head. , 376e bone screw to fix the cup. , 377a cementless hip system ha/poro coated femoral stem, different sizes. , 377b cementless hip system ceramic head(bilox delta) 32,36 mm with variable neck length. , 377c cementless hip system acetabular cup ha/poro coated with option of screws, should accomodate 32,36 mm head with same cup. , 377d cementless hip system acetabular ceramic liner, should accommodate 32,36 head. , 377e bone screw to fix the cup. , 378a primary femoral stem: non cemented primary femoral tapered short, rounded tipped short stem made of titanium alloy porocoated with layer of ha allowing preservation of femoral neck. , 378b non cemented acetabular cup: non cemented hemispherical acetabular cup made of titanium alloy with peripheral anti rotation fins with inbuilt ceramic liner made of zirconia & alumina, with different diameters. , 378c ceramic femoral head for cup: ceramic femoral head with various sizes. , 378d femoral adaptor sleeve: femoral adaptor sleeve made of titanium alloy with clean taper fit and compatible with the inner ceramic taper of the femoral head with different sizes , 379a uncemented femoral stem : uncemented primary femoral tapered blade style stem made of titanium alloy with poro coating with high friction titanium coating. with anterior & posterior longitudinal flute, should be proximal femoral bone preserving. , 379b bilox delta ceramic head 32,36 mm with variable neck length. , 379c uncemented hip system acetabular cup ha/poro coated with option of screws, should accomodate 32,36 mm head with same cup. , 379d uncemented hip system acetabular highly crosslink poly cup liner with 10 degree lpw ,various sizes, should accommodate 32,36 head. , 379e bone screw to fix the cup. , 380a un cemented hip system ha/poro coated femoral stem, various sizes. , 380b bilox delta ceramic head 32,36 mm with variable neck length. , 380c un cemented trabecular metal cup different sizes accommodate large head with screw option. , 380d uncemented hip system acetabular highly crosslink polycup liner with 10 degree lpw ,various sizes, should accommodate 32,36 head. , 380e bone screw to fix the cup. , 381a uncemented femoral stem, proximal sleeve, femoral head femoral head: 36 mm ceremic head of alumina & zerconia with different neck length. stem: noncemented proximal loading option titanium alloy, tapered with coronal slot & distal flutes ,variable neck length diameter & offset. sleeve: porocoated proximal femoral sleeve with locking mechanism with femoral stem ,various sizes. , 381b noncemented titanium acetabular cup with gription poro coating with locking mechanism for liner, various sizes with screw locking option. , 381c highly crosslink poly cup liner with 10 degree lpw different sizes, should accommodate 32,36 head. , 381d bone screw to fix the cup. , 382a cemented long stem, various sizes & offsets. , 382b acetabular cup with lpw. , 382c large diameter head 32,36 , 382d stem centralizer , 382e cement restrictor , 383a revision uncemented acetabular cup : multi hole titanium alloy actebular shells with a full 180 degree hemisphere poro coated with option of multiple screw holes for fixation with options to fit all liners (metal, ceramic & poly) of various sizes . , 383b revision acetabular screw: 5.5 titanium alloy acetabular revision screws for peripheral area of cup in various sizes. , 383c 6.5 mm titanium self tapping cancellous screw for use in central area of the cup. , 383d uncemented hip system acetabular highly crosslink poly cup liner with 10 degree lpw ,various sizes, should accommodate 32,36 head. , 383e ceramic femoral head for cup: ceramic femoral head made of alumina & zirconia with various sizes. , 383f distally interlocked femoral reconstruction revision hip system ha coated distal locking option with various diameter & length with the provision of reconstruction of trochanter & cerclage cable hole. , 383g distal interlocked screw titanium distal locking self tapping various sizes. , 384a acetabular reconstruction system acetabular reconstruction titanium ring with ha coated acetabular shell with option of multiple central & peripheral screws with corresponding screws(8 screws). , 384b posteriorly lipped highly cross linked poly liner various sizes. , 384c bilox delta ceramic femoral head for cup, various sizes. , 384d femoral revision system distally fixed revision femoral stem, porous coated, with calcar replacement options different diameter. , 385 acetabular mesh, ss , 386 acetabular mesh, titanium , 387 femoral mesh, titanium , 388 acetabular cage, various sizes, titanium , 389 uni condylar mobile knee system consisting of femoral components, tibial inserts & tibial tray of various sizes. , 390a femoral component ,co cr, various sizes , 390b tibial component, titanium alloy, various sizes , 390c tibial insert, various sizes , 390d patellar button, various sizes , 391 total condylar, pcl substituting ,fixed bearing / mobile bearing with the provision of high flex knee system consist of following components: femoral component, tibial component, tibial insert. , 392 cruciate retaining high flexion knee system consist of following components: femoral component, titanium tibial tray , highly cross linked poly insert . , 393a posterior stabilized fixed bearing femoral components with ability to attach extender stems. , 393b highly cross linked poly insert with locking mechanism,with option of both cruciate substituting and retaining various sizes. , 393c co cr tibial tray with ability to attach extension stem, various sizes. , 393d patella along with three pegs. , 394 patient specific total knee prosthesis ( us fda approved): consists of femoral & tibial component, tibial insert. the tkr design should be patients own ct or mri based ,the mechanical based alignment to be matched with patients own mechanical axis, the cutting block must provide patients own reference for distal femoral & proximal tibial cut, it should have robust design and should have faster turn around time(less than 4 weeks). , 395a semi constraint total knee prosthesis: femoral component with the ability to accept any kind of metal augments & offset extension stem. , 395b femoral metal augment for distal & posterior femur various sizes , 395c femoral extension stem various offset & sizes , 395d tibial component with ability to accept various sizes tibial augmentation blocks, wedges & extension stem. , 395e semi constraint tibial knee inserts all sizes , 395f metal tibial wages step, hemi & full of various sizes and thickness , 395g tibial extension stem various offset & sizes , 396a semi constraint total knee prosthesis: femoral component with the ability to accept any kind of poro coated metaphyseal sleeves & offset extension stem. , 396b metaphyseal porocoated femoral sleeves, various sizes. , 396c femoral extension stem various offset & sizes , 396d semi constraint mobile bearing tibial knee inserts all sizes , 396e tibial component mobile bearing tray with ability to accept various sizes porocoated metaphyseal sleeves & extension stem. , 396f metaphyseal porocoated tibial sleeves, various sizes. , 396g tibial extension stem various offset & sizes , 397a cable wire with sleeves, ss , 397b sleeve for cable wire ss , 398a cable wire with sleeves, co cr , 398b sleeve for cable wire co cr , 399 neer prosthesis fixed shoulder various sizes. , 400a hemi shoulder stem, co cr . , 400b hemi shoulder humeral head , 401a total shoulder humeral stem with holes in fins for muscle and soft tissue reconstruction cemented/uncemented. , 401b humeral head. , 401c glenoid prosthesis cross linked poly. , 402a cemented humeral stem with 0 10 degree retroversion, co cr. , 402b non cemented humeral stem with 0 10 degree retroversion, co cr. , 402c high mobility humeral polythelene cup. , 402d glenoid implant with fixation screws. , 402e locking/non locking fixation screws. , 403 pulse lavage wound debridement system (disposable battery operated with concurrent suction and fan spray tip) , 404 antibiotic spacers for hip joint(high resistance bone cement body loaded with antibiotic ), all sizes. , spacers for hip and knee antibiotic spacers for knee joint ,all sizes , 406 elbow prosthesis total elbow implant with accessories i)humeral component various sizes ulna component various sizes , 407 single pin clamp , 408 double pin clamp , 409 open double pin clamp , 410 twin adjustable clamp straight , 411 twin adjustable clamp curved , 412 transverse clamp , 413 connecting clamp , 414 single pin clamp with extension plate , 415 double pin clamp with extension plate. , 416 connecting rod 5.0 mm , 417 spanner 11 mm , 418 t wrench 11 mm , 419 box spanner 11mm , 420 triple tocar set with handle , 421 tubular rod 4 , 422 tubular rod 6 , 423 tubular rod 8 , 424 tubular rod10 , 425 tubular rod 12 , 426 tubular rod 14 , 427 tubular rod 16 , 428 tubular rod 18 , 429 tubular rod 20 , 430 tube to tube clamp , 431 threaded schanz pins (self tapping) dia. 3.5 mm, shaft 4 mm ,short threadedl 125mm. , 432 threaded schanz pins (self tapping) 4.0 mm, short threaded, l 100 200 mm , 433 threaded schanz pins (self tapping) 4.0 mm long threaded, l 100 200 mm , 434 threaded schanz pins (self tapping) 4.5 mm short threaded, l 100 200 mm , 435 threaded schanz pins (self tapping) 4.5 mm long threaded, l 100 200 mm , 436 threaded schanz pins (self tapping) 5.0 mm short threaded, l 100 200 mm , 437 threaded schanz pins (self tapping) 5.0 mm long threaded, l 100 200 mm , 438 cancellous front threaded 5 mm schanz pins, thread l 16mm, l 100 200 mm. , 439 cancellous front threaded 5mm schanz pins, thread l 32 mm, l 100 200 mm. , 440 cancellous front threaded 5mm schanz pins , thread l 50 mm, l 100 200 mm . , 441 threaded schanz pins 2.0 mm . , 442 threaded schanz pins 2.5 mm . , 443 threaded schanz pins 3.0 mm . , 444 threaded schanz pins 3.5 mm. , 445a small single pin clamp 4.0 x 2.5 mm for 2 & 2.5 mm schanz pins. , 445b small single pin clamp 4.0 x 4.0 mm for 3.5 mm schanz pins. , 445c small connecting clamp 4.0 x 4.0 mm , 445d connecting rods 4.0 mm dia length 100 to 300mm (50mm increment) , 445e open small single pin clamp 4.0 x 2.5 mm , 445f open small connecting clamp 4.0 x 4.0 mm , 445g small compression distraction device size: 60mm,75mm,100mm,150mm , 446 spanner 8 mm , 447 t wrench 8 mm , 448 ball & socket type distractor set with 360 degree rotation compatible with 2.5 mm & 3.5 mm schanz screw.(rate to be quoted for one set consist of ball & socket distractor assembly with two 2.5 mm & two 3.5 mm schanz screw) , 449a k wire with threaded tip,1.25 mm,l 100 mm , 449b k wire with threaded tip,1.60 mm,l 100 mm , 449c schanz pin 2.5 mm ,various sizes , 449d connecting rod 3 mm ,various sizes , 449e universal clamps for 1.25 mm & 1.60 mm wire , 449f connecting clamps , 449g dc assembly , 450 femoral distractor set. , 451a rail rod,l 200 400 mm , 451b central clamp , 451c swivel clamp , 451d end clamp , 451e schanz pin 6 mm, tappered 4.5 mm to 3.5 mm. , 451f schanz pin 6 mm, tappered 6 mm to 5 mm. , 452 schanz pin 6 mm, tappered 4.5 mm to 3.5 mm with hydroxy apetite(ha) coating for threads. , 453 schanz pin 6 mm, tappered 6 mm to 5 mm with hydroxy apetite(ha) coating for threads. , 454a rail rod, l 150 250 mm , 454b central clamp , 454c swivel clamp , 454d end clamp , 454e schanz pin 4 mm, tappered 3.5 mm to 3 mm. , 455 schanz pin 6 mm ,tappered 4.5 mm to 3.5 mm with hydroxy apetite(ha) coating for threads. , 456 ctev set small (components) link joint 30, connecting rods(2.5mm) st. 4 3, 6 2, 8 2, z rods 2, l rods large 2, small 2, distractor 4mm 4 2, 6 2, foot plate 1, k wires 2mm 6 2,1.6mm 6 6, allen keys , 457 ctev set medium (components) link joints 30, connecting rods (3.0mm) st. 5 3,6 2, 10 2, z rods 2, l rods (large) 2, small 2, distractor 4mm 4 2, , 6 2, foot plate 1, k wires (2.0mm) 5 3, 6 2,allen keys , 458 ctev set large (components) clamps aescualp type 4x2.5 9, 4x4 12, connecting rods 6 5, 12 2, distractors 4mm 6 2, d.c.rods 2, foot plate 1, k wires 2.5mm5 5, 2.0mm 6 6, allen keys , 459 spring jess fixator set for ctev. , 460il1 ilizarov half rings(the holes should match with the stainless steel ring) sizes 110,120,130,140,150,160,180,200,220 mm ,carbon fiber frame , 460il2 ilizarov half rings (the holes should match with the carbon ring) sizes 110,120,130,140,150,160,180,200,220 mm, ss , 460il3 ilizarov fixator set 5/8 ring(sizes 110,120,130,140,150,160,180,200 mm),ss , 460il4 ilizarov cannulated bolt. , 460il5 ilizarov connection bolt. , 460il6 ilizarov slotted bolt. , 460il7 ilizarov nuts. , 460il8 ilizarov bushing. , 460il9 ilizarov telescopic rods 100mm , 460il10 ilizarov telescopic rods 150 mm , 460il11 ilizarov telescopic rods 200 mm , 460il12 ilizarov telescopic rods 250mm , 460il13 ilizarov telescopic rods 300 mm , 460il14 ilizarov telescopic rods 350 mm , 460il15 ilizarov graduated telescopic rods 60mm, , 460il16 ilizarov graduated telescopic rods 100 mm , 460il17 ilizarov graduated telescopic rods 150 mm , 460il18 ilizarov graduated telescopic rods 200mm, , 460il19 ilizarov graduated telescopic rods 250 mm , 460il20 ilizarov threaded rods 100mm 200mm (50 mm increments)up to 400mm , 460il21 ilizarov male post , 460il22 ilizarov female post , 460il23 ilizarov male hinge , 460il24 ilizarov female hinge , 460il25 ilizarov male hinge, low profile , 460il26 ilizarov female hinge, low profile , 460il27 ilizarov hinges 90 degree standard , 460il28 ilizarov hinges 90 degree low profile , 460il29 ilizarov spacing washers ,1.5 mm , 460il30 ilizarov spacing washers ,2 mm , 460il31 ilizarov split locking washers ,2 mm , 460il32 ilizarov slotted washers ,4 mm , 460il33 ilizarov flat sided washers, 2mm , 460il34 ilizarov flat sided washers ,4 mm , 460il35 ilizarov conical couple washer , 460il36 ilizarov oval washer , 460il37 nylon washer , 460il38 nylon insert nut. , 460il39 ilizarov italian arch , 460il40 ilizarov threaded socket & buckles. , 460il41 ilizarov short connection plate , 460il42 ilizarov curved connection plate , 460il43 ilizarov wire fixation nuts + bolts central hole , 460il44 ilizarov wire fixation nuts + bolts side hole , 460il45 ilizarov square nut , 460il46 ilizarov threaded rod 60,80,100,120,150 mm. , 460il47 ilizarov threaded rod 200,250,300,350,400 mm , 460il48 ilizarov slotted threaded rod 60,80,100 mm. , 460il49 ilizarov oblique support connection. , 460il50 ilizarov rotational & transational device. , 460il51 ilizarov twisted plate , 460il52 ilizarov multiple pin fixation clamp. , 460il53 ilizarov single schanz pin fixation bolt , 460il54 wires for ilizarov bayonet tip, cortical 1.5x(300 400mm) , 460il55 wires for ilizarov bayonet tip, cortical 1.8x(300 400mm) , 460il56 wires for ilizarov trocar tip 1.5x(300 400mm) , 460il57 wires for ilizarov trocar tip 1.8x(300 400mm) , 460il58 stopper wires for ilizarov (olive wires)one piece,1.5x(300 400mm) , 460il59 stopper wires for ilizarov (olive wires)one piece,1.8x(300 400mm) , 460il60 wrench shoes small, medium, large , 460il61 spanner for ilizarov fixator,10 mm , 460il62 t wrench for ilizarov fixator , 460il63 box spanner , 460il64 universal hinge , 460il65 wrencho cubes , 460il66 wire tensioner dynamic , 460il67 wire fixation buckle , 461 negative suction drainage set (disposable) 10fg to 18fg sizes single tube , 462 negative suction drainage set (disposable) 10fg to 18fg sizes double tube sterile disposable drapes(all drapes should be single use with well packed in peel off pouche with inbuilt ethylene oxide(e.o) indicator having shelf life not less than 3 years, product should have isi/iso certified ) & should have sterilization certificate from sterilizing source. , 463 sterile u draps with adhesive strip(double layer disposable),200 x 240 cm medical fabric not less than 60 gsm , 464 sterile u draps with adhesive strip(double layer disposable),160 x 200 cm medical fabric not less than 60 gsm , 465 sterile knee o drape with adhesive strip(reinforced impermeable 3 layer fabric), 200x320 cm , 466 sterile elbow drape with adhesive strip(reinforced impermeable 3 layer fabric), 150 x 250 cm , 467 sterile knee drape with adhesive strip(reinforced impermeable 3 layer fabric) with absorbent centre sheet size 75x100 cm & total size 120 x 160 cm. , 468 sterile hip u drape with adhesive strip(reinforced impermeable 3 layer fabric)with absorbent centre sheet size 100x150 cm & total size200 x 300 cm. , 469 sterile hip u drape with adhesive strip(reinforced impermeable 3 layer fabric)with absorbent centre sheet size 100x150 cm & attached leg pouch, total size 200 x 240 cm, medical grade sms (sms=spun +melt bloun+spun)fabric. , 470 sterile spinal drape(reinforced impermeable 3 layer fabric)with adhesive strip on central aperture ,8x12 cm, with absorbent centre sheet size 100x150 cm , total size 150x300 cm. , 471 sterile knee arthroscopy drape (reinforced impermeable 3 layer fabric) size: 200x300cm with fluid collection pouch. , 472 sterile disposable wrapping drape (ldpe),15 x 100 cm , 473 sterile disposable wrapping drape (ldpe),30 x 150 cm , 474 sterile cling film roll,12x100 cm. , 475 face mask with anti fog shield (4 ply). , 476 sterile disposable legging (pair packing) with fluid repellant fabric. , 477 sterile c arm cover (pair). , 478 screen cover (transparent) with adhesive strip,160x200 cm , 479 mackintosh sheet, autoclavable, size 1 x 2 meter(rubber). , 480 disposable sterile water proof sheets (double packed),150x200 cm. , 481 incise drape 20x30 cm , 482 incise drape 30x30 cm , 483 incise drape 30x45 cm , 484 incise drape 40x45 cm , 485 incise drape 45x60 cm , 486 povidone iodine impregnated incise drape 20x(20 30) cm , 487 povidone iodine impregnated incise drape 25x(30 40) cm , 488 povidone iodine impregnated incise drape 30x(45 55) cm , 489 povidone iodine impregnated incise drape 35x(55 65) cm , 490 povidone iodine impregnated incise drape 40x60 cm , 491 trolley cover ,size 125x150cm , 492 trolley cover, size 150x200 cm , 493 camera cover (pre sterile disposable) with 2 tying string. , 494 cable cover (pre sterile) , 495 stockinette (disposable),2x 5 meter(cotton). , 496 stockinette (disposable) ,3x 5 meter(cotton). , 497 stockinette (disposable),4x 5 meter(cotton). , 498 stockinette (disposable) ,5x 5 meter(cotton). , 499 stockinette (disposable),6x 5 meter(cotton). , 500 arm sling pouch should be made up of soft quality fabric, should have non stretching strap, adjustable, closure with velcro plastic buckles, s/m/l , 501 arm sling pouch should be made up of soft quality fabric, should have non stretching strap, adjustable, closure with velcro plastic buckles, xl , 502 ankle wrap,3 elastic band with valcro closure, s/m/l , 503 ankle wrap,3 elastic band with valcro closure, extra large , 504 ankle brace should be made up of foam fused fabric, should have semi rigid plastic splints on both side of brace, velcro closure and plastic buckles for locking, sizes s/m/l. , 505 ankle brace should be made up of foam fused fabric, should have semi rigid plastic splints on both side of brace, velcro closure and plastic buckles for locking, sizes xl. , 506 tennis elbow band(high strength foam padded strap),s/m/l , 507 tennis elbow band(high strength foam padded strap),extra large , 508 wrist binder with thumb support. , 509 shoulder immobilizer s/m/l , 510 shoulder immobilizer, extra large , 511 cot finger splint(u shaped to keep finger in straight position),s/m/l , 512 frog splint(four leg construction allow self closing for immobilization of dip joint in extension & pip joint in flexion),s/m/l , 513 spoon splint(to keep finger tip in extension),s/m/l , 514 protector splint for finger tip injury( + mark design to protect finger tip from all around),s/m/l , 515 base ball splint for distal phalanx injury(finger tip fold over design),s/m/l , 516 mallet finger splint(splint to keep dip joint in 10 degree hyper extension),s/m/l , 517 finger extension splint(spring wire construction for keeping finger in extension),s/m/l , 518 finger flexion splint(spring wire construction for keeping finger in flexion),s/m/l , 519 thumb spica splint , 520 knuckle bender splint , 521 carpel tunnel splint day time , 522 carpel tunnel splint night time , 523 arm sling strap heavy duty strap with two way buckle system. , 524 wrist & fore arm splint(right & left) , 525 static wrist cock up splint(right & left),s/m/l , 526 dynamic wrist cock up splint(right & left). , 527 foot drop splint, s/m/l , 528 foot drop splint, xl , 529 boot and de rotation bar splint , 530 compression stockings(latex free) with moderate compression option above knee, s/m/l , 531 compression stockings(latex free) with moderate compression option below knee, s/m/l , 532 resistance band for stage 1 to stage 6 (for resistance rehabilitation exercise),various thickness. , 533 bolster ,s/m/l. , 534 triangular pillow for abduction of hip. , 535 silicon heel cushion(right & left),s/m/l , 536 silicon insole, s/m/l , 537 silicon arch pad, s/m/l , 538 silicon metatarsal pad, s/m/l , 539 silicon toe spacer , 540 cast shoe, s/m/l , 541 cast shoe, xl , 542 kramer wire splint :width 7.5 cm,l 100 cms , 543 kramer wire splint :width 10 cm, l 100 cms , 544 thomas splint (well padded thigh ring), small , 545 thomas splint (well padded thigh ring),medium , 546 thomas splint (well padded thigh ring),large , 547 bohler brown splint , small , 548 bohler brown splint, medium , 549 bohler brown splint, large , 550 bohlers stirrup, small , 551 bohlers stirrup ,medium , 552 bohlers stirrup ,large , 553 screws for bohler stirrup , 554 walker fixed type , 555 walker adjustable & foldable (coated aluminum frame work with comfortable hand grips. , 556 auxiliary crutches(adjustable height),aluminum , 557 elbow crutches(adjustable height),aluminum , 558 walking stick, aluminum mono pod with handle grip and rubber tip. , 559 walking stick, aluminum tri pod with handle grip and rubber tip. , 560 walking stick, aluminum tetra pod with handle grip and rubber tip. , 561 wheel chair(foldable) mag wheel, seat width 16/18,weight capacity > 99 kg, fixed arm rest,8 solid caster,24 solid rear wheel, double crossed bar. , 562 wheel chair(foldable) with commode mag wheel, seat width 16/18,weight capacity > 99 kg, fixed arm rest,8 solid caster,24 solid rear wheel, double crossed bar. , 563 wheel chair mag wheel, seat width 16/18,weight capacity > 99 kg, fixed arm rest,8 solid caster,24 solid rear wheel. , 564 wheel chair with commode mag wheel, seat width 16/18,weight capacity > 99 kg, fixed arm rest,8 solid caster,24 solid rear wheel. , 565 lumbar traction kit with rod (all sizes) , 566 cervical traction kit with rod (all sizes) soft foam padding , 567 pelvic traction kit with rod. , 568 b/k skin traction kit with velcro strap. , 569 leg traction kit with pully. , 570 buck pulley. , 571 plastic pulley single. , 572 balkan frame with accessories compatible with hospital beds. , 573 paraffin wax,1kg , 574 paraffin wax,5kg , 575 gymnasium ball,75 cm , 576 physiotherapy clay,1 kg , 577 weight cuff, 1/2 kg . , 578 weight cuff ,1 kg , 579 weight cuff ,2 kg , 580 weight cuff, 3 kg , 581 bone marrow aspiration system , 582 bone biopsy needle(jamshidi) , 583 bone currate small , 584 bone currate medium , 585 bone currate large , 586 bone nibbler small , 587 bone nibbler medium , 588 bone nibbler large , 589 bone nibbler double action straight small , 590 bone nibbler double action straight medium , 591 bone nibbler double action straight large , 592 bone nibbler double action curved small , 593 bone nibbler double action curved medium , 594 bone nibbler double action curved large , 595 hammer small(250 gm) , 596 hammer medium(500 gm) , 597 hammer large(750 gm) , 598 bone cutter medium , 599 bone cutter large , 600 self retaining retractor without hinges, small , 601 self retaining retractor without hinges, medium , 602 self retaining retractor without hinges, large , 603 self retaining retractor with hinges , small , 604 self retaining retractor with hinges , medium , 605 self retaining retractor with hinges , large , 606 acl/pcl reconstruction set consist of a to i. , 606a tibial tunnel guide system for acl reconstruction (should have locking system with variable angle adjustment form 35 to 60 degree) , 606b cannulated flower tip drill bit with laser marking for calculation of bone tunnel length for acl reconstruction. size 5,6,7,8,9,10,11 mm , 606c femoral off set guide for 4,5,6,7 ,8 mm. , 606d drill tip graft passing pin 2.4 mm. , 606e drilling wire 2.4 mm. , 606f graft preparation board. , 606g tendon stripper,7 mm dia., close ended , 606h thickness tester , 606i bio screw driver. , 607 acl repair implants : stainless steel cannulated interference screws dia 7 10 mm l 20,25,30mm , 608 acl repair implants : titanium cannulated interference screws dia 7 10 mm l 20,25,30mm , 609 acl repair implants : titanium with rounded thread soft cannulated interference screws dia 7 10 mm l 20,25,30mm , 610 acl repair implant : bio absorbable interference screw size 7 11mm, l 20 30mm , 611 acl repair implant : tibial bio absorbable interference screw with proximal slop to flush fix in anterior tibial cortex size 7 11mm, l 20 30mm , 612 acl repair implant : bio composite interference screw size 7 11mm, l 20 30mm , 613a acl femoral fixation sheath with screw for tendon graft fixation, various sizes , 613b acl tibial fixation sheath with screw for tendon graft fixation, various sizes , 614 acl femoral fixation device(metal pin), 15mm cortical length, l 40mm , 615 acl femoral fixation device(bio absorbable pin ,various sizes) , 616 button for lateral cortical femoral fixation , 617 button along with loop for acl reconstruction, various sizes , 618 acl suture button with flexible loop for lateral femoral fixation, various sizes. , 619 acl suture button with continuous loop for lateral femoral fixation, various sizes. , 620 acl reconstruction button along with loop & preloaded with passing suture ,l 15 35 mm , 621 ligament staple in dia 8 11 mm , 622 suture post (flat head screw) sizes 4.5x (25 50) mm ,titanium , 623 meniscal repair system of meniscal tear(disposable) , 624 meniscal needle with continuous fiber wire needle , 625 drainage/ irrigation needle for knee arthroscopy. , 626 shoulder cannula disposable . , 627 shoulder cannula reusable. , 628 1.9 mm anchore with #2 suture with handle ,titanium , 629 2.7 mm anchore with #2 suture with handle ,titanium , 630 2.8 mm anchore with #2 suture with handle,titanium , 631 3 mm anchore with #2 suture with handle ,titanium , 632 3.5 mm anchore with #2 suture with handle ,titanium , 633 5 mm suture anchore with #2 polyester suture ,titanium , 634 5.5 mm fully threaded anchor #2 suture ,titanium , 635 3 mm knotted bio absorbable anchor , 636 2.3 mm knot less bio absorbable anchor , 637 2.9 mm knot less bio absorbable anchor , 638 2.3 mm knot less peek anchor , 639 2.9 mm knot less peek anchor , 640 3.5 mm knot less bio absorbable anchor , 641 3.5 mm knot less peek anchor , 642 5.5 mm bio absorbable anchor with thread , 643 all peek anchor for double & single row cuff repair. dia 4.5,5.5 & 6.5 mm , 644 suture passer 45 degree left and right , 645 suture passer 90 degree left and right , 646 suture shuttle needle. , 647 uhmw # 2 number white/coloured suture with needles , 648 uhmw # 2 number stripped colour suture with needles , 649 acromio clavicular joint dislocation repair system having button on one side & suture disc on other side ,connected with suture wire , 650 normal saline 3 litre pack , 651 radio frequency ablation probe(different angle)for arthroscopy, disposable (please quote rate for one radio frequency ablation probe only and machine/generator to be provided by company for ablation probe use for surgery) , 652 cervical disc replacement system metal on poly. , 653 cervical disc prosthesis metal on metal with anterior translation. , 654 anterior cervical inter body fusion peek cage size , height 5 12 mm , 655 anterior cervical peek inter body fusion spacer and plate with integrated double screws for each vertebra, 5 12 mm , 657 anterior cervical peek inter body fusion spacer and plate with integrated single screw for each vertebra, 5 12 mm , 658 low profile cervical locking fixation plate with 4 self drilling & self locking screw single level. , 659 low profile cervical locking fixation plate with 6 self locking screw double level. , 660 anterior mesh cage for cervical spine, titanium , 661 variable angle anterior cervical plate with self drilling screw and inbuilt locking screw, single level with 4 screw , 662 variable angle anterior cervical plate with self drilling screw and inbuilt locking screw, double level with 6 screw , 663 variable angle anterior cervical plate with self drilling screw and inbuilt locking screw, three level with 8 screw , 664a posterior cervical system lateral mass screw 3.5 mm ,various length, titanium , 664b posterior cervical system lateral mass rod, titanium , 665a pedical screw for cervical spine 3.5 mm, various length, titanium , 665b pedical screw rod for cervical spine, titanium , 666 occipito cervical fixation rod plate system, small, titanium , 667 occipito cervical fixation rod plate system, medium ,titanium , 668 occipito cervical fixation rod plate system, large, titanium , 669 trans articular odontoid cannulated screw all sizes, titanium , 670a pedicle screws 4.5,5.5,6.5,7.5 mm(mono axial),titanium , 670b pedicle screws 4.5,5.5,6.5,7.5 mm(poly axial),titanium , 670c pedical screw rod, titanium , 670d transverse connector, titanium , 670e pedicle hook, titanium , 670f sub laminar hook, titanium , 670g facet hook, titanium , 671a percutaneus cannulated pedicle screw 4.5,5.5,6.5,7.5 mm ,titanium , 671b percutaneus cannulated pedicle screws corresponding rod ,titanium , 672a pedical screw with break off plug , size 4.5, 5.5,6.5,7.5 dia length 20 70 mm , titanium , 672b pedical screw with break off plug corresponding rod, titanium , 673a hydroxy appetite(ha ) coated pedicle screw 4.5,5.5,6.5,7.5 mm, titanium , 673b hydroxy appetite(ha ) coated pedicle screw corresponding rod, titanium , 674a reduction screws with break off plug for spondyloslithesis , titanium , 674b pedicle screws 4.5,5.5,6.5,7.5 mm(poly axial),titanium , 675 fenestrated pedicle screw for bone cement augmentation size 4.5,5.5,6.5,7.5 mm, titanium , 675a corresponding rod for fenestrated pedicle screw., titanium , 675b corresponding rod for reduction screws with break off plug ,titanium , 676 trans formal lumber inter body fusion(tlif) peek cage size 26 mm, height 7 15mm , 677 trans formal lumber inter body fusion(tlif) peek cage size 28 mm, height 7 – 16 mm , 678 trans formal lumber inter body fusion(tlif) inter vertebral rotatable peek cage size 26 mm, height 7 15 mm , 679 trans formal lumber inter body fusion(tlif) inter vertebral rotatable peek cage size 28 mm, height 7 15 mm , 680 posterior lumber inter body fusion (plif) bullet shaped peek cage height 8 14mm , 681 expandable peek cages with rachet system for cervical spine , 682 expandable peek cages with rachet system for dorsal spine , 683 expandable peek cages with rachet system for lumber spine , 684 inter laminar peek spacer all sizes , 685 inter laminar titanium spacer all sizes , 686 vertebral staple single hole 5.5,6.5,7.5 mm dia. , 687 vertebral staple double hole 12,13,14,15 mm dia. , 688 vertebro plasty kit: , 689 kit should have low viscosity bone cement(25 gm) and cement delivery system consists of one pressurizer, syringe, connector , suction cannula, cement mixing bowl and spatula and vertebral body puncture needle 3 mm x100 & 150 mm. , 690 kypho plasty kit with two balloons(digital) kit should have digital device to inflate balloon showing pressure in psi & atm., inflatable balloon should bear pressure up to 400 psi. , 691a hart schill sizes 100mm,125mm,150mm,200mm,250mm , 691b sub laminar cable wire , 692a ultrasonic blade for safe spine surgery bone scalpel all size , 692b irrigation tube for bone scalpel (disposable) , 693 autoclavable eschmarch bandage ,4 , 694 autoclavable eschmarch bandage ,6 , 695 skin marking pen,sterile , 696 elastic nail (tens) , 697 ender nails , 698 hand drill , 699 methylene blue marker...

Military Engineer Services - Bihar

34133519 day to day maintenance and certain other works at otm accn at mil stn gaya s&f in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding / staples directed by engg in charge. 2 hacking out old broken glass ( any the size quality or description ) from wooden or steel frames glazed all as specified and directed by engr in charge. 3 s&f 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed by engr in charge. 4 s&f 4mm thickfigured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 sqm each pane complete all as specified and directed. 5 s&f as in repair double legged door stopper of aluminium alloy with rubber all as specified and directed by engr in charge. make classic or equivalent 6 s&f 15mm size with stainless steel braided hose / connection pipe with brass nuts of length 900 mm all as specified and as directed. make: parryware / hindware / prayag 7 s&f as in repair pvc connections 15mm size with ptmt nuts of length 600 mm all as specified and as directed. make prayag / polytuff / symet 8 s&f as in repair pvc connections 15mm size with ptmt nuts of length 900 mm all as specified and as directed. prayag / polytuff / symet 9 supply & fix in repair brass chromium plated pillar cock log neck with aerator for wash hand basin screwed down for iron pipes suitable for 15mm bore pipe complete engr in charge. ( make parryware / prayag / hindware ) 10 s&f in repair 15 mm dia two way angle valves / bib taps, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions ( make parryware / prayag / hindware ) 11 s &f as in repair chromium plated shower rose 125 mm dia with 600mm cp shower arm fancy type fixed to 15mm bore pipeall as specified and directed. ( make parryware / prayag / hindware ) 12 s & f cp as in repair jet spray complete all as specified & directed. ( make plumber / parryware / prayag / hindware ) 13 s & f as in repair normal closing white seat cover forewc incl accessories complete all as spd ( make jaguar / hindware / kohler ) 14 supplying and laying as in repair of cpvc pipes 20mm outer dia sdr 11 & plain cpvc sdr 11 fittings on walls / ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing gi tubing & connections all as specified and directed by engr in charge. 15 supplying and laying as in repair of cpvc pipes 25mm outer dia sdr 11 & plain cpvc sdr 11 fittings on walls / ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing gi tubing & connections all as specified and directed by engr in charge. 16 supplying and laying as in repair of cpvc pipes 32mm outer dia sdr 11 & plain cpvc sdr 11 fittings on walls / ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing gi tubing & connections all as specified and directed by engr in charge. 17 s&f as in repair 15mm stop valves cast copper alloy chromium plated fancy type concealedtype screwed down high pressure with crutch or butterfly handle screwed down, high pressure with crutch screwed both ends for iron pipe or for unions and fixed in repairs all as specified and as directed make plumber / parryware / prayag 18 s&f in repair white colour rotational moulded three layer polyethylene water storage tanks ( cylindrical vertical with closed top ) capacity 500 ltrhoisted and fixed in position incl dismantlng and removing to store all as specified and directed by engr in charge. make; sintex / rotex / polycon 19 s&f in repair white colour rotational three layer moulded polyethylene water storage tanks ( cylinderical vertical with closed top ) capacity 1000 ltrhoisted and fixed in positionincl dismantlng and removing to storeall as specified and directed by engr in charge. make; sintex / rotex / polycon 20 s&f in repair white colour rotational three layer moulded polyethylene water storage tanks ( cylindrical vertical with closed top ) capacity 2000 ltrhoisted and fixed in positionincl dismantlng and removing to store all as specified and directed by engr in charge. make; sintex / rotex / polycon 21 demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. 22 m&l brick workwith sub class b bricks straightor curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. 23 taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. 24 m&l for rendering 5mmthick in ceiling on brick work or concrete surfaces in cm 1:4, finished even and smooth without using extra cement all as specified and directed. 25 m&l for rendering 10mm thick internal surfaces on other than fair faces of brick work in cm 1:6 as directed by engr in charge. 26 m&l for rendering 15mm thick external surfaces on brick / concrete in cm 1:4 finished even and smooth without using extra cement with wpc 2% by wt of cement.note: wpc measured and paid separatly 27 m&l for applying 1.00 mm thick wall care putty incl preparation of newly plastered wall surfaces 28 m&l for applying two coat of acrylic distemper over a coat of primer incl preparation of newly plastered wall surfaces 29 m&l for 2 coatsexterior emulsion paint over a coat of primerincluding preparation of newly plastered wall surfaces complete all as specified and directed 30 dismantling stone slabs and tiles of any description or thickness laid dry or laid dry and pointed in floors, aprons etc 31 m&l for granite ( any type ) work ( table rubbed and polished ) 18 to 20 mm thick in working platform and like including cutting for sink etc. in cement mortar ( 1:4 ) including rounding of edges and pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match.complete all as specified and as directed 32 dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) , removing serviceable tiles to store and rubbish off the premises 33 m & l coloured non skid ceramic coloured jointless tiles ( square / rectangular ) area of each tile exc 0.06 sqm but not exc. 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with cm 1:4 complete. 34 m & l coloured digital glazed ceramic coloured tiles in vertical surfaces 350x250x7mm / 450x350x 7 mmthick set and jointed in neat cement slurry and pointed in white or coloured cement to matchincl 10mm thick rendering in cement mortar 1:4as backing for tiles complete all as specified and as directed. 35 m&l for vitrified tiles double charge light shed 10 mm thick ( square or rectangular ) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed with and pointed in white or coloured cement to match over and incl 15mm thick screed bed or bedding layer with cm 1:4 complete. 36 m & l machine cut kota stone slab flooring 18 22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including screed bed or bedding layer of mortar 20 mm thick cement mortar 1:6. ( note : work will be carried out as in repair of patches in lieu of existing broken flooring ) 37 dismantling wallandceilingboards ( fibre, pulp, insulation, etc. ) or insulation boards / slabs / blankets, any thickness, including cover fillets 38 s&f in repairs of 4 mm thick hpsc ( high pressure steam cured ) pre primed textured designer board, water resistant, be placed in the grid system all as specified and directed by the engineer in charge. make : everest / armstrong 39 taking down chowkhats or frames not exc 1.5 sqm ( without taking shutters from the frame ) and removing to and from store complete 40 taking down chowkhats or frames exc 1.5 sqm but n exc 4sqm ( without taking shutters from the frame ) and removing to and from store complete 41 s&f powder coated aluminium frame / shutters for windows, ventilators sliding / openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws, etc complete all as specified.make : jindal / hindalco / indalco. note : ( i ) glazing and wire mesh shall be measured and paid separetely. ( ii ) item shall be paid as per weight of aluminium section ( iii ) the rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight ( iv ) the rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. 42 taking down existing aluminium door shutter with frame area exceeding 1 sqm and re fixing in same opening after repair / replace the defective jointing cleats / screws all as per specified and directed by engr in charge. 43 s & f of taper clips, tee, angles and other items for aluminium door complete. 44 s & f of rubber gasket for aluminium door glass complete 45 s & f aluminium handles, cast type, d shape anodised of size 150mm. 46 s&f galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding / staples directed by engg in charge. 47 s&f 4 mm thicksheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 sqm in each pane, complete all as specified and directed. 48 s& f 100mm butt hinges, extruded stainless steel with hinge pin complete. make prayag or equivalent 49 s&f 200 mm long aluminium anodised barrel tower boltof extruded section. 50 s&f in repair steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10 mm dia, 100 mm size 51 s&f as in repair 100 mm vertical type size mortice lock with four levers ( vertical type ) , mild steel body complete all as specified and directed. 52 supply only liquid water proofing compound 53 s & f in repair vitreous china wash down water closet pan ( pedestal pattern ) , white including fixing bolts, but excuding flushing cistern and flush pipe complete. make : jaguar / hindware / kohler 54 s & f as in repair vitreous china squatting pan, ‘orissa’ pattern, size 580 x 440 mm white, with integral foot rests, p trap water closet ( squatt pattern ) complete including provision of lime concrete bedding all as specified and directed 55 s & f as in repair10 litre pvc valveless, syphonic action type, dual type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets ( make: parryware / hindware / jaguar ) 56 s&f as in repair vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets or fixed to walls with anchor fastnersall as specified and directed by engr in charge. ( make: parryware / hindware / cera ) 57 demolition of concrete in ground floors and pavings including floor tiles n exc 15 cm thickness ( below or above ground level ) 58 m&l for pcc 1:2:4 type b 1 using 20 mm graded stone aggregate as in floor finishes 40 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed. 59 m&l for pcc 1:2:4 type b 1 using 20 mm graded stone aggregate as in floor finishes 75 mm thick laid in panels & finished even and smooth without using extra cement complete all as specified and directed. 60 m&l for pvc ( swr ) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipeincluding taking down etc complete all as specified and directed. 61 m&l for pvc ( swr ) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe including taking down etc complete all as specified and directed 62 s&f pvc ( swr ) bends isi marked any radius of 110 mm borewithaccess door complete all as specified and directed. 63 s&f pvc ( swr ) bends isi marked any radius of 75 mm borewithaccess door complete all as specified and directed. 64 s&f in repair 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. ( make plumber / parryware / prayag ) 65 taking down chowkhats or frames not exc 1.5 sqm ( without taking shutters from the frame ) and removing to or from store complete. 66 s&f solid pvc door frame of size 50mm x 47mm made out of 5mm single side prelam pvc sheet & edges will be painted to match with prelam sheet reinforced with m.s. square tube, suppling & fixing in opening as per specification & drawing 67 s&f solid pvc factory madedoor shutter of 30mm ( style ) consisting of frame made out of ms tubes for top bottom rails ms frame shall be covered with heat moulded plain coloured pvc c channel having a pvc sheet strip 20mm width stuck inside with solvent cement for stilesa and plain coloured pvc sheets for top rail, lock & bottom rail on either sides & as gap insert for top rail & bottom rail panelling ofplain colour pvc sheet to be fitted in the ms frame welded / sealed to the stiles & rails with suitable pvc sheet beeding and jointed together with solvent cement as pere specification and drawing 68 s&f in repair aluminium body isi marked door closer hydraulically regulated, designation no. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specifiedand directedmake: hardwyn / marshal...

Building Division - Bihar

33735788 providing fitting and fixing wall paper of approved design in all rooms kitchen lobby area and hall etc all complete works supply fitting and fixing of plumbing work including making all connecting fittings, providing fitting and fixing aluminum frame work of wall face over ply wood and pesting of pvc mica, roller blind, lloyd split air conditioner inverter, bright finished brass helical door spring...

Building Construction Department - Bihar

33734751 tender for providing, fitting & fixing ball paper of approved design in all bed roonisr kitchen,. lobby are & hall etc all complete work should be done as per direction e/i, supply fitting and fixing of plumbing work including making all conn ectng fittings (in jaguar or 151 marked) as per direction of e/i , 2 in 1 pillar cock, pillar cock, wall mixture pillar cock, shower, western commode, 4 no anlge, mirror 60.0x450 nim, hanger, ptmt towel rail {goo mm), ptmt liquid sop container of 400 ml capacity, long type towel hanger, geyser , exhaust fan, providing fitting & fixing aluminium frame work on wall face over 12 mm thick ply wood and pesting of pvc mica of approved quality & brand as per direction of e/i , providing fitting & fixing roller blind of approved quality, & colour as per direction of e/i, providing fitting & fuming lloyd split air conditioner inverter 1.5 ton a.0 of approved quality, & brand as per direction of e/i, providing and fixing bright finishined brass helical door spring (superior quality) & all fitting as per direction...

Employees State Insurance Corporation - Bihar

33354345 e tender for invitation for empanelment of supplier for orthopedic implants for a period of two year , dynamic compression plates ss , dcp plates 1.5mm with corresponding screws ss , dcp plates 1.5mm ( 2 8 ) holes ss , 1.5 mm cortical screws l 6mm 20mm ss , dcp plates 2.0 mm with corresponding screws ss , dcp plates 2.0mm ( 2 8 ) holes ss , 2.0mm cortical screws l 6mm 20mm ss , dcp plates 2.7 mm with corresponding screws ss , dcp plates 2.7mm ( 2 12 ) holes ss , 2.7mm cortical screws l 6mm 20mm ss , dcp plates 3.5mm with corresponding screws ss , small dcp plate 3.5mm for fore arm ( 4 10 holes ) ss , 3.5mm cortical screws l 10mm 30mm ss , narrow dcp plates 4.5mm with corresponding screws ss , narrow dcp 4.5mm plate ( 5 14 holes ) ss , 4.5mm cortical screws l 10mm 40mm ss , broad dcp plates 4.5mm with corresponding screws ss , broad dcp plate 4.5mm ( 6 18 holes ) ss , 4.5mm cortical screws l 20mm 60mm ss , dynamic compression plates , titanium , dcp plates 1.5mm with corresponding screws, titanium , dcp plates 1.5mm ( 2 8 ) holes , titanium , 1.5 mm cortical screws l 6mm 20mm , titanium , dcp plates 2.0 mm with corresponding screws, titanium , dcp plates 2.0mm ( 2 8 ) holes, titanium , 2.0mm cortical screws l 6mm 20mm titanium , dcp plates 2.7 mm with corresponding screws, titanium , dcp plates 2.7mm ( 2 12 ) holes , titanium , 2.7mm cortical screws l 6mm 20mm titanium , small dcp plates 3.5mm with corresponding screws, titanium , small dcp plate 3.5mm for forearm ( 4 14 holes ) , titanium , cortical screw 3.5 mm , l 10 30 mm, titanium , narrow dcp plates 4.5mm with corresponding screws, titanium , narrow dcp 4.5mm plate ( 5 12 holes ) , titanium , cortical screw 4.5 mm , l 20 60 mm, titanium , broad dcp plates 4.5mm with corresponding screws, titanium , broad dcp plate 4.5mm ( 5 14 holes ) , titanium , cortical screw 4.5 mm , l 20 60 mm, titanium , lc dcp plates , lc dcp plate 3.5 mm with corresponding screws, ss , lc dcp 3.5mm, ( 4 12 ) holes , ss , 3.5mm cortical screws l 10mm 30mm ss , narrow lc dcp plate 4.5 mm with corresponding screws, ss , narrow lc dcp 4.5mm 4 holes to 16 holes, ss , 4.5mmcortical screws l 10mm 40mm, ss , broad lc dcp plate 4.5 mm with corresponding screws, ss , broad lc dcp 4.5mm 6holes to 18 holes, ss , 4.5mm cortical screws l 20mm 60mm ss , lc dcp plate 3.5 mm with corresponding screws, titanium , lc dcp 3.5mm, ( 4 12 ) holes , titanium , 3.5mm cortical screws l 10mm 30mm , titanium , narrow lc dcp plate 4.5 mm with corresponding screws, titanium , narrow lc dcp 4.5mm 4 holes to 16 holes, titanium , 4.5mm cortical screws l 10mm 40mm , titanium , broad lc dcp plate 4.5 mm with corresponding screws, titanium , broad lc dcp 4.5mm 6holes to 18 holes, titanium , 4.5mm cortical screws 20mm 60mm l, titanium , locking compression plate with corresponding screw , locking compression plate 3.5 mm with corresponding screw, ss , lcp 3.5mm, ( 4 12 ) holes, ss , 3.5 mm locking head self tapping screw , l 10mm 30mm , ss , 3.5 mm self tapping cortical screw , l 10mm 30mm , ss , locking compression plate 3.5 mm with corresponding screw, titanium , lcp 3.5mm, ( 4 12 ) holes, titanium , 3.5 mm locking head self tapping screw , l 10mm 30mm , titanium , 3.5 mm self tapping cortical screw , l10mm 30mm , titanium , narrow locking compression plate 4.5 mm with corresponding screw, ss , lcp 4.5, narrow, 4 holes to 16 holes , ss , 5 mm locking self tapping screw, l 10mm 40mm , ss , 4.5 mm self tapping cortical screw , l 10mm 40mm , ss , narrow locking compression plate 4.5 mm with corresponding screw, titanium , lcp 4.5, narrow, 4 holes to 16 holes , titanium , 5 mm locking screw, l 10mm 40mm , titanium , 4.5 mm self tapping cortical screw , l 10mm 40mm , titanium , broad locking compression plate 4.5 mm with corresponding screw, ss , lcp 4.5, broad, 6 18 holes , ss , 5 mm locking head self tapping screw , l 20 60 mm , ss , 4.5 mm self tapping cortical screw , l 20 60 mm, ss , broad locking compression plate 4.5 mm with corresponding screw, titanium , lcp 4.5, broad, 6 18 holes , titanium , 5 mm locking head self tapping screw , 20 60 mm l, titanium , 4.5 mm self tapping cortical screw , l 20 60 mm , titanium , broad curved femoral locking compression plate 4.5 / 5 mm with corresponding screw, ss , lcp 4.5 / 5, broad curved, 12 26 holes left & right for femur, ss , 5 mm locking head self tapping screw , l 20 60 mm , ss , 4.5 mm self tapping cortical screw , l 20 60 mm , ss , broad curved locking compression plate 4.5 / 5 mm with corresponding screw, titanium , lcp 4.5 / 5 , broad curved, 12 26 holes left & right for femur, titanium , 5 mm locking head self tapping screw, l 20 60 mm , titanium , 4.5 mm self tapping cortical screw , l 20 60 mm , titanium , spacer for lcp , spacer for lcp ( titanium ) 3.5 mm dia , spacer for lcp ( titanium ) 4.5 / 5.0 mm dia , locking compression plates for distal radius , t plate right angled for distal radius with screws, ss , small t plate, right angled for distal radius 3.5mm, ( 3 6 ) holes, ss , cortical screw 3.5 mm , l 8 40 mm, ss , plate oblique angled for distal radius with screws ss , small t plate, oblique angled plate for distal radius, 3.5mm , ( 3 5 ) holes, ss , cortical screw 3.5 mm , l 8 40 mm, ss , distal radius locking plate system 2.4 mm with corresponding screws, ss , distal radius volar medial column locking plate 2.4 mm, ss , distal radius dorsal t locking plate 2.4 mm, ss , distal radius dorsal locking plate 2.4 mm, ss , radial styloid locking plate 2.4 mm, ss , locking screw 1.8 mm, l 18 40 mm, ss , locking screw 2.4 mm , l 8 40 mm, ss , non locking screw 2.4 mm, l 8 40 mm, ss , cortical screw 3.5 mm with head 2.7 mm, l 8 40 mm, ss , lcp t plate set for distal radius with screws, titanium , lcp t plate 3.5mm, right angled, 3 6holes , for distal radius, titanium , lcp t plate 3.5mm, oblique angled, right / left, 3 6holes , for distal radius, titanium , 3.5 mm self tapping cortical screw, l 6 30 mm, titanium , 3.5 mm locking head screw, l 6 30 mm, titanium , locking plate system for distal radius, titanium , lcp distal radius plate 2.4mm, straight, 5 and 6 holes, for dorsal plating, titanium , lcp distal radius l plate 2.4mm, left and right angled, shaft 3 and4, head 3 holes, for dorsal plating, titanium , lcp distal radius t plate 2.4mm, left and right angled, shaft 3 and4, head 3 holes, for dorsal plating, titanium , lcp distal radius l plate 2.4mm, oblique, left and right angled, shaft 3 and4, head 3 holes, for dorsal plating, titanium , lcp distal radius t plate 2.4mm, oblique, left and right angled, shaft 3 and4, head 3 holes, for dorsal plating, titanium , lcp distal radius plate 2.4mm, left and right , shaft 3 to 5 holes, head 5 holes, for intra articular volar fractures, titanium , lcp distal radius plate 2.4mm, extra articular, left and right , shaft 3 and 5, head 4 and 5 holes, titanium , lcp distal radius plate 2.4mm, extra long, shaft 8 to12 holes, head 4 holes, titanium , cortex screws dia 2.4mm, self tapping, l 14 40mm, titanium , locking screws 2.4 mm self tapping l 6 30mm , titanium , 3.5 mm self tapping cortical screw, l 6 30 mm, titanium , 3.5 mm locking head self tapping screw, l 6 30 mm, titanium , variable angle lcp system for distal radius , titanium , 34a variable angle lcp two column distal radius plate 2.4 mm, 6 7 holes in head and 2 4 holes in shaft, titanium , variable angle lcp volar rim plate 2.4 mm for distal radius with 6 holes in head 5 holes in shaft, titanium. , 2.4mm variable angle locking screws, l 10 30 mm, titanium , 2.4mm self tapping locking screws, l 10 30 mm, titanium , cortical screw 2.7 mm self tapping l 10 30 mm, titanium , locking plate distal ulna system, titanium , locking distal ulna plate with hook , titanium , cortical screw self tapping 2 mm l 8 30 mm, titanium , locking head screw self tapping 2mm l 8 30mm, titanium , mini plate for hand , mini plate set , titanium , strut plates 1.5mm , titanium , t plates 1.5mm , titanium , y plate 1.5 mm, titanium , 1.5 mm cortical screw, titanium , locking t plate set 2mm with corresponding screw , titanium , locking t plate 2mm, titanium , locking straight plate 2.0 mm , titanium , locking condylar plate2 .0 mm , titanium , 2 mm locking cortical screw, titanium , locking t plate set 2.4 mm with corresponding screw , titanium , locking t plate 2.4 mm, titanium , locking straight plate 2.4 mm , titanium , 2.4 mm cortical screw, titanium , 2.4 mm locking head screw, titanium , foot plate , calcaneal plate set 3.5mm with corresponding screws, ss , calcaneal plate 3.5mm, l 60mm 70mm , ss , 3.5 mm cortical screw , l 10mm 30mm , ss , locking plate set with corresponding screw for calcanium, titanium , locking plate for calcanium, titanium , locking screws 2.4 mm, l 10 30 mm, titanium , locking screws 2.7 mm, l 10 30 mm, titanium , locking screws 3.5 mm, l 10 40 mm, titanium , locking x plate set for hallex valgus osteotomy with corresponding screw, titanium , locking x plate for hallex valgus osteotomy, titanium , locking screw 2.7 mm ( head 2.4 mm ) self tapping, 10 30 mm, titanium , special plates ( tubular plate ) , quarter tubular plate set 2.7 mm with corresponding screws, ss , quarter tubular plate 2.7 mm ( 4 6 holes ) ss , 2.7 mm cortical screw, l 10 30 mm, ss , 1 / 3rd tubular plate set 3.5 mm with corresponding screws, ss , 1 / 3rd tubular plate 3.5 mm, ( 2 12 ) holes, ss , 3.5 mm cortical screw, l 10 30 mm, ss , 1 / 3rd tubular locking plate 3.5 mm with corresponding screws, ss , 1 / 3rd tubular locking plate , 3.5 mm, ( 2 12 ) holes, ss , 3.5 mm locking head screw l 6 30 mm, ss , semi tubular plates 4.5mm with corresponding screws, ss , semi tubular plates 4.5mm, 2holes to 12 holes, ss , cortical screw 4.5mm, l 20 60 mm , ss , t plate & buttress plates , t buttress plate 4.5mm ( 4 8 ) holes, ss , l buttress plates 4.5mm, 3 8 holes, right / left leg , ss , t buttress plate 4.5mm, 3 12 holes, titanium , l buttress plate 4.5mm, 3 8 holes, right / left leg, titanium , reconstruction plates , y reconstruction plates 3.5mm , ss , reconstruction plate 3.5 mm ( 5 22 holes ) , ss , reconstruction plate 4.5 mm ( 5 22 holes ) , ss , straight pelvic reconstruction plate 3.5mm ( 5 22 ) holes, ss , lcp reconstruction plate set with corresponding screws, titanium , lcp reconstruction plate 3.5mm, straight w / combined hole, 5 14holes, titanium , 3.5 mm self tapping cortical screw, l 20 60 mm, titanium , 3.5 mm locking head self tapping screw, l 20 60 mm, titanium , low profile reconstruction pelvic plate system with corresponding screw, ss , reconstruction plate 3.5 mm low profile, 6 16 holes, curved, ss , reconstruction plate 3.5 mm low profile, 3 20 holes, straight , ss , reconstruction plate 3.5 mm low profile, 10 16 holes, j shaped, ss , pelvic cortex screw 3.5 mm self tapping with head height 2.75 mm , l 40 90, ss , pelvic cortex screw 3.5 mm self tapping with head height 2.75 mm , l 90 150, ss , spring plate with corresponding screw, ss , spring plate, 1 3 holes, length 195 mm, 315 mm, 435 mm, ss , 3.5 mm cortical screw for spring plate, l 20 40mm ss , proximal humeral locking plate , proximal humeral locking plate set with corresponding screws, ss , proximal humeral locking plate 3.5mm, holes ( 4 10 ) , left & right , ss , 3.5 mm cannulated locking screw 20 60 mm, ss , 3.5 mm cannulated non locking screw 20 60 mm, ss , 3.5 mm locking screw 12 60 mm, ss , 3.5 mm cortical screw 12 60 mm, ss , proximal humeral locking plate set with multi directional screws, titanium , proximal humeral locking plate with multi directional screw placement through same hole , holes ( 4 8 ) , titanium , cancellous screw 4.5 mm, l 20 60 mm, titanium , cannulated cancellous screw 4.5 mm, l 20 60 mm, titanium , multi directional cortical screw 4 mm , l 14 60 mm, titanium , cannulated screw 4 mm , l 14 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , periarticular proximal humerus locking plate set with corresponding screws, titanium , periarticular proximal humerus locking plate 3.5 mm ( 2 6 hole ) left & right, titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , distal humeral locking plate , distal humerous locking plate set with corresponding screws, ss , distal humerous locking plate 3.5 mm medial , left & right, 5 8 holes, ss , distal humerous locking plate lateral , left & right, 5 8 holes, ss , cortical screw 2.7 mm, l 10 60 mm, ss , locking head cortical screw 2.7 mm, l 10 60 mm, ss , 3.5mm cortical screws with head 2.7 mm, l 20 40 mm, ss , 3.5mm cortical screws with locking head 2.7 mm, l 20 40 mm, ss , lcp distal humerus plate set with corresponding screws, titanium , lcp distal humerus plate 2.7 / 3.5mm dorsolateral with and without support for lateral condyle right or left, holes ( 3 14 ) , titanium , lcp distal humerus plate 2.7 / 3.5mm medial, right or left, holes ( 3 14 ) , titanium , locking screw 2.7 mm ( head 2.4 ) self tapping , l 14 60 mm, titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , locking distal humerus extra articular plate set with corresponding screws, ss , locking distal humerus extra articular plate, 6 10 combi holes, ss , locking head screw 3.5 mm, l 10 60 mm, ss , cortical self tapping screw 3.5 mm, l 10 60 mm, ss , lcp distal humerus extra articular plate set with corresponding screws, titanium , lcp distal humerus extra articular plate, 6 10 combi holes, titanium , locking head screw self tapping 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , distal femur , distal medial femoral locking plate set with corresponding screws, ss , distal medial femoral locking plate , 4.5 / 5 mm left / right, ( 6 18 holes ) , ss , locking head screw self tapping 5 mm, l 20 80 mm, ss , cancellous self tapping screw 5 mm, l 20 70 mm, ss , distal medial femoral locking plate set with corresponding screws, titanium , distal medial femoral locking plate , 4.5 / 5 mm left / right, ( 6 18 holes ) , titanium , locking head screw self tapping 5 mm, l 20 80 mm, titanium , cancellous self tapping screw 5 mm, l 20 70 mm, titanium , distal lateral femoral locking plate set with corresponding screws, ss , distal lateral femoral locking plate , 4.5 / 5 mm left / right, ( 6 18 holes ) , ss , locking head screw self tapping 5 mm, l 20 80 mm, ss , cortical self tapping screw 4.5 mm, l 20 70 mm, ss , lcp for lateral distal femur set with corresponding screws, titanium , lcp for lateral distal femur 4.5mm, 5 to 13 holes, right and left, titanium , locking head screw self tapping 5 mm, l 20 80 mm, titanium , cortical self tapping screw 4.5 mm, l 20 70 mm, titanium , proximal tibia plate , proximal lateral tibial locking plate set with corresponding screws, ss , 68a proximal lateral tibial locking plate 4.5 / 5 mm, left / right ( 4 14 holes ) , ss , cannulated locking screw 5.5 mm, l 20 80 mm, ss , cancellous screw 5.5 mm, l 20 70 mm, ss , cortical screw 4.5 mm self tapping, l 20 70 mm, ss , proximal lateral tibial locking plate set with corresponding screws, titanium , proximal lateral tibial locking plate 4.5 / 5 mm, left / right ( 4 14 holes ) , titanium , locking head screw self tapping 5 mm, l 20 80 mm, titanium , cancellous screw 6.5 mm, l 20 70 mm, titanium , cortical screw 4.5 mm self tapping, l 20 70 mm, titanium , lcp medial proximal tibial plate set with corresponding screws, titanium , lcp medial proximal tibial plate 3.5mm right / left shaft, 4 20mm holes, titanium , lcp lateral proximal tibia plate , 3.5mm , 4 16mm holes, right / left, titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , distal tibia plate , distal medial tibia locking plate set with corresponding screws, ss , distal medial tibia locking plate 3.5 mm , left & right ( 5 21 holes ) , ss , locking head screw 3.5 mm, l 10 60 mm, ss , cortical self tapping screw 3.5 mm, l 10 60 mm, ss , cancellous locking screw 4 mm, ss. , lcp anterolateral distal tibia plate set with corresponding screws, titanium , lcp anterolateral distal tibia plate 3.5mm, right or left, holes ( 5 21 ) , titanium , lcp distal medial tibia plate 3.5mm medial 4 14mm holes right / left, titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , distal fibular plate , distal lateral fibular locking plate set with corresponding screws, titanium , distal lateral fibular locking plate ( 4 10 holes ) titanium , locking head screw 3.5 mm, l 10 30 mm, titanium , cortical self tapping screw 3.5 mm, l 10 30 mm, titanium , metaphyseal plate , metaphyseal plate 3.5mm set with corresponding screws, titanium , metaphyseal plate 3.5mm , titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , metaphyseal plate 4.5 / 3.5 mm set with corresponding screws, titanium , metaphyseal plate 4.5 / 3.5 mm for metaphyseal fractures. titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , locking head screw self tapping 5 mm, l 20 80 mm, titanium , cortical self tapping screw 4.5 mm, l 20 70 mm, titanium , osteotomy plate angled blade plate , angled blade plates 130 ° blade for femoral angular osteotomy, l ( 50mm 95mm ) 4 9 holes, ss , 90° osteotomy plate 4 holes, ss , condylar blade plate 95°, 5 18 holes, ss , osteotomy plate medial high tibia, 3 and 4 holes, right and left, titanium , pediatric plates & screws , lcp for pediatric proximal femur varus osteotomy 3.5 and 5 mm , ss , lcp for pediatric proximal femur valgus osteotomy 3.5 and 5 mm, ss , lcp pediatric distal femur set with corresponding screws, ss , lcp for pediatric distal femur osteotomy and fractures 3.5 and 5 mm , ss , locking head screw 3.5 mm, l 10 60 mm, ss , cortical self tapping screw 3.5 mm, l 10 60 mm, ss , locking head screw self tapping 5 mm, l 20 80 mm, ss , cortical self tapping screw 4.5 mm, l 20 70 mm, ss , epiphysiodesis plate , figure of eight ( 8 ) plate for epiphysiodesis, with two corresponding screws , ss , figure of eight ( 8 ) locking plate for epiphysiodesis with two corresponding screws , titanium , clavicle plate , clavicle locking plate set with corresponding screws, ss , clavicle locking plate 3.5 mm, ss , locking head screw 3.5 mm, l 10 40 mm, ss , cortical self tapping screw 3.5 mm, l 10 40 mm, ss , clavicle locking plate set with corresponding screws, titanium , clavicle locking plate 3.5 mm, titanium , locking head screw 3.5 mm, l 10 40 mm, titanium , cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , clavicle hook plate set with corresponding screws, ss , clavicle hook plate 3.5mm right / left 6 holes, hook l 15 to 18mm, ss , cortical screw 3.5 mm, l 10 40 mm, ss , lcp clavicular hook plate set with corresponding screws, titanium , lcp clavicular hook plate 3.5mm right and left ( 4 8 ) holes , hook 12 18mm, titanium , locking head screw 3.5 mm, l 10 40 mm, titanium , cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , variable angle locking clavicle anterior plate set with corresponding screws, titanium , variable angle locking clavicle anterior plate 3.5 mm, titanium , 3.5 mm locking variable angle screws, l 16 30mm , titanium , cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , wrist arthrodesis plate , lc lcp wrist fusion plate set with corresponding screws, titanium , lc lcp wrist fusion plate2.4 / 3.5, standard bend, titanium , locking head screw 2.4 mm, l 10 40 mm, titanium , cortical self tapping screw 2.4 mm, l 10 40 mm, titanium , locking head screw self tapping 3.5 mm, l 10 40 mm, titanium , cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , wrist arthrodesis plate , lc lcp wrist fusion plate set with corresponding screws, titanium , lc lcp wrist fusion plate2.4 / 3.5, standard bend, titanium , locking head screw 2.4 mm, l 10 40 mm, titanium , cortical self tapping screw 2.4 mm, l 10 40 mm, titanium , lcp olecranon plate set with corresponding screws, titanium , lcp olecranon plate 3.5mm , left / right, holes ( 2 12 ) , titanium , locking head screw self tapping 3.5 mm, l 10 40 mm, titanium , cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , lcp olecranon hook plate set with corresponding screws, titanium , lcp olecranon hook plate 3.5 mm, 2 10 holes, titanium , locking head screw self tapping 3.5 mm, l 10 40 mm, titanium , cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , proximal ulnar locking plate set with corresponding screws, ss , proximal ulnar locking plate 3.5 mm, 3 9 holes, ss , locking head screw self tapping 3.5 mm, l 10 40 mm, ss , cortical self tapping screw 3.5 mm, l 10 40 mm, ss , dynamic hip screw system , dhs plate set with corresponding screws, ss , dhs plate 130°, 135°, 150° , barrel length 38mm ( 4 10 ) holes, ss , dhs plate 135°, barrel length 25mm ( 4 6 ) holes, ss , dhs / dcs lag screw 12.5 / 8.0mm, l 50mm 115mm, ss , dhs / dcs compression screw 4.0mm, l 36mm, ss , cortical screw 4.5 mm, l 20 70 mm, ss , dhs trochanter stabilizing plate , ss , lcp dhs plate set with corresponding screws, titanium , lcp dhs plate 130°, 135°, 150° , barrel length 38mm, 2 6 holes, titanium , lcp dhs plate 135°, barrel length 25mm ( 4 6 ) holes, titanium , lcp dhs / dcs screw 12.5 / 8.0mm, l 50mm 115mm, titanium , helical blade for lc dhs , 12.5 dia, l 65 115 mm, titanium , dhs / dcs compression screw 4.0mm, l 36mm, titanium , locking device for lag dhs, 35 mm, titanium , locking cortical screw 5 mm , l 20 60 mm, titanium , self tapping cortical screw 4.5 mm , l 20 60 mm, titanium , plate for periprosthetic fracture. , cable plate system for periprosthetic fracture. , cable plates 6 10 hole, for peri prosthetic fractures, ss , cable assembly with cerclage dia. 1.8 mm, ss , cable for plate dia . 1.8 mm, ss , cable needle assembly, dia. 1.3 mm , cortical bone screw 4.5 mm for use with cable plate , hex button 3.5 mm for use with 4.5 & 6.5 mm screw, ss , cable pin ( 2 in no. ) 1.3 mm , l 35 65 mm. , cable pin crimpar assembly , locking attachment plate set for periprosthetic fractures with corresponding screws, titanium , locking attachment plate for peri prosthetic fractures 4 & 8 hole, 3.5 mm, titanium , locking head screw self tapping 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , connecting screw, 5 mm , l 10 40 mm , trochanteric fixation plate set with corresponding screws, titanium , trochanteric fixation plate with option of multiple screw & screw cerclage wire, various sizes, titanium. , cortical screw 3.5 mm, l 10 50 mm, titanium. , cortical screw 4.5 mm, l 14 60 mm, titanium. , cancellous screw 4 mm short thread, l 20 60 mm, titanium. , cancellous screw 4 mm full thread, l 20 60 mm, titanium. , cerclage cable co cr. , femoral nail , reconstruction femoral nail set, titanium **** , reconstruction femoral nail 9.0mm to 12mm dia, right / left, l ( 340 440 ) mm, titanium , hip screw 6.5mm, l ( 75 110 ) mm, titanium , end cap, cannulated , l 0mm 15mm, titanium , locking bolt , self tapping, l 26 mm 68mm for recon nail, titanium , washer 12.0 / 6.5mm dia., 2.5mm thick, titanium , proximal femoral nail set, titanium , proximal femoral nail 9 mm 13 mm dia. long, right / left, l ( 200mm 380mm ) , titanium , , femoral neck screw 11.0mm dia, l 80mm 115mm, titanium , hip screw 6.5mm , l 70mm 105mm, titanium , locking bolt , self tapping, l 26 mm 68mm for proximal femur nail, titanium , proximal femoral nail set with blade, titanium , proximal femoral nail with anti rotation for short stature and osteoporotic bones 9.0 12mm, l 170mm 420mm, right / left, titanium , helical blade for proximal femoral nail , l 75mm to 120mm, titanium , end cap for proximal femoral nail, l 0 15mm extension , locking bolt , self tapping, l 26 mm 68mm for proximal femur nail, titanium , antigrade proximal femoral nail set, ss , antigrade proximal femoral nail with one proximal hole should have a locking option from greater trochanter to lesser trochanter. dia 8 16 mm length 240 500mm, ss , end cap for antigrade femoral nail 12.0mm, extension 0mm 15mm, ss , proximal locking screw , ss , distal locking screw , ss , antigrade femoral nail set , titanium , antigrade femoral nail with one proximal hole should have a locking option from greater trochanter to lesser trochanter. dia 8 16 mm length 240 500mm, titanium , end cap for antigrade femoral nail 12.0mm, extension 0mm 15mm, titanium , proximal locking screw , titanium , distal locking screw , titanium , cannulated interlocking femoral nail set, ss , cannulated interlocking femoral nail , dia. 9mm 13mm , l 340 440mm, ss , inter locking bolt, ss , end cap, ss , unreamed solid femoral nail set, titanium , unreamed solid femoral nail , 9.0 10 mm dia., l 280mm 480mm, titanium. , inter locking bolt, titanium. , end cap, titanium. , cannulated interlocking femoral nail set, titanium , cannulated interlocking femoral nail 09.0mm 13.0mm dia., l 280mm 480mm, titanium. , end cap , titanium , locking bolts , titanium , supra condylar femoral fracture nail set, titanium , supra condylar femoral fracture nail 9.0mm dia., l 160mm 340mm, solid, titanium , supra condylar femoral fracture nail 9 mm to12mm dia., cannulated, l 200mm 380mm, titanium , distal locking screw , titanium , spiral blade l ( 60mm 80mm ) , titanium , proximal locking screw 6 mm, self tapping, titanium , end cap for nail using locking screw and spiral blades, titanium , retrograde femoral nail set, ss , retrograde femoral nail dia 9 14 mm, l 140 480 mm, ss , distal locking bolt , ss , proximal locking bolt , ss , end cap for retrograde nail, ss , femur expandable nail initial dia 8.5mm expandable upto 13.5mm, len 32cm to 46cm ( increment 2cm ) for antegrade / rotrograde insertion with or without proximal locking , kuntcher clover leaf i / m nail 6mm 14mmdia., length 20cms to 48cms ( 1cm increment ) , tibial nail , unreamed solid tibial nail set, titanium , unreamed solid tibial nail 8.0mm 9.0mm dia.l 285mm 380mm, titanium , end caps for tibial nails, titanium , locking bolt , titanium , cannulated interlocking tibial nail set, titanium , cannulated interlocking tibial nail 8 11 mm dia.l 300mm 400mm, titanium , end caps for tibial nails, titanium , locking bolt , self tapping, titanium , cannulated interlocking tibial nail set, ss , cannulated interlocking tibial nail 8mm 12mm l 200mm to 400mm, ss , end caps , ss , locking bolt , ss , multi directional tibial nail set, titanium , multi directional tibial nail, dia 8mm 10mm, l 285 405mm for all fractures of tibia , titanium , locking screw 4.0mm and 5.0mm, l 18 60mm, for multi directional nails, titanium , cancellous bone locking screw 5.0mm with dual core, self tapping, l 30 50mm, titanium , end cap for multi directional tibial nail, extension 0 15mm, titanium , tibial expandable nail initial dia 8.5mm for length 30 38 cms expanded upto 13.5mm for antegrade insertion with or without proximal locking. , humeral nail , unreamed humeral nail set, titanium , unreamed humeral nail , various sizes, titanium , spiral blade for unreamed humeral nail, titanium , locking bolts , self tapping, l 16mm 48mm for humerus nailing, titanium , proximal humeral naii set, titanium , proximal humeral naii various sizes, titanium , spiral blade for phn, titanium , locking bolts , self tapping, titanium , end caps with 0mm 15mm extension, titanium , humerus inter locking nail set, ss , humerus inter locking nail various sizes , ss , locking bolt, ss , end cap, ss , humerus inter locking nail set, , titanium , humerus inter locking nail various sizes , titanium , locking bolt, titanium , end cap, titanium , fore arm & hands , square nail for radius and ulna 1.5 , 2.0 , 2.5 mm dia., 17cms to 30 cms length ( 1cm increment ) , square nail for radius and ulna 3mm, 3.5mm dia., 17cms to 30 cms length ( 1cm increment ) , special nails , elastic nail 2.0, 2.5, 3 mm dia. , l 440mm, titanium , elastic nail 3.5 4.0 mm dia. , l 440mm, titanium , ender nail, dia 6 12 mm, various length, ss , bone substitutes , injectable bone substitutes , injectable bone substitutes 100% nano crystal hydroxy apetite ( ha ) bone paste , 1 ml. , injectable bone substitutes 100% nano crystal hydroxy apetite ( ha ) bone paste , 2 ml. , injectable bone substitutes 100% nano crystal hydroxy apetite ( ha ) bone paste , 5 ml. , injectable bone substitutes, b tricalcium phosphate and hylonorate solution with needle10g and 12g for injectable bone substitute, 10cc , granules & wedges , b tri calcium phosphate granules 1.4 2.8mm / porosity 60% bone substitutes, 5.0g , b tri calcium phosphate granules 1.4 2.8mm / porosity 60% bone substitutes, 10.0g , b tri calcium phosphate granules 1.4 2.8mm / porosity 60% bone substitutes, 20.0g , b tri calcium phosphate cylinder, 10.5mm dia, l 25mm bone substitutes , b tri calcium phosphate wedge, angle 14 , 25x20mm bone substitutes , b tri calcium phosphate wedge, angle 28 , 25x20mm bone substitutes , b tri calcium phosphate wedge, angle 22 , 25x20mm bone substitutes , b tri calcium phosphate wedge, angle 26 , 25x20mm bone substitutes , b tri calcium phosphate wedge, half round, 7° angle , for tibial osteotomy bone substitutes , b tri calcium phosphate wedge, half round, 10° angle , for tibial osteotomy bone substitutes , b tri calcium phosphate wedge, half round, 13° angle , for tibial osteotomy bone substitutes , wires & pins , cerclage wire with eye , dia. 1mm, 1.25mm, 1.5 mm l 280 to 600mm, ss , cerclage wire tightener . , wire mount for lcp 4.5 / 5.0 mm, titanium , s.s. wires: 16 , 18 , 20 , 22 , 24 gauge.146 , giggli wire , giggli wire handle , steinman pins dia., 3mm, 3.5mm., 4mm, x 150, 175, 200, 225 mm length, ss , steinman pins dia., 4.5mm, 5mm x 150, 175, 200, 225 mm length, ss , denham pins dia., 3mm, 3.5mm., 4mm, x 150, 175, 200, 225 mm length, ss , denham pins dia., 4.5mm, 5mm x 150, 175, 200, 225 mm length, ss , k wires , k wire, dia. 0.6mm, l 70mm, ss , k wire, dia. 0.8 mm l 150mm, ss , k wire with trocar tip , dia. 1.4mm, 1.6mm, 1.8mm, 2.0mm, l 150mm , ss , k wire with trocar tip , dia. 2.5mm, 3.0 mm , l 150mm , ss , k wire with trocar tip dia. 1.4mm, 1.6 mm, 1.8mm, 2.0mm , l 280mm, ss , k wire with trocar tip dia. 2.5mm, 3.0 mm , l 280mm, ss , k wire double tip, dia. 1.4mm, 1.6mm, 1.8mm, 2.0mm, l 150 300 mm, ss , k wire double tip, dia. 2.5mm, 3.0 mm l 150 300mm, ss , k wire with threaded tip, dia. 1.25mm, 1.6mm, 2.5mm l 150mm, ss , guide wire , guide wire with spade point dia.1.5mm, 1.6mm, 2.0mm l 150 to300mm, ss , guide wire with trocar tip dia.1.25mm, 2.0mm l 200 to 230mm, ss , guide wire graduated ( threaded ) 1.25 mm dia. , ss , screws , cortical screws 1mm dia, length 2mm to 20mm ( 2mm increments ) ss , cortical screws 1.5mm dia, length 2mm to 20mm ( 2mm increments ) ss , cortical screws 2mm dia, length 2mm to 20mm ( 2mm increments ) ss , cortical screws 2.5mm dia, length 2mm to 20mm ( 2mm increments ) ss , cortical screws 2.7 mm dia, length 6mm to 20 mm ( 2mm increments ) ss , cortical screws 2.7 mm dia, length 22 mm to 40 mm ( 2mm increments ) ss , cortical screws 3.5 mm dia, length 10mm to 40 mm ( 2mm increments ) ss , cortical screws 3.5 mm dia, length 45mm to 80 mm ( 5mm increments ) ss , cortical screws 3.5 mm dia, length 10mm to 40 mm ( 2mm increments ) , titanium , cortical screws 3.5 mm dia, length 45mm to 80 mm ( 5mm increments ) , titanium , cortical screws 4.5 mm dia, length ( 10mm to 40 mm ) ( 2mm increments ) , ss , cortical screws 4.5 mm dia, length ( 42mm to 80 mm ) ( 2mm increments ) , ss , cortical screws 4.5 mm dia, ( 10mm to 40 mm ) ( 2mm increments ) , titanium , cortical screws 4.5 mm dia, ( 42mm to 80 mm ) ( 2mm increments ) , titanium , cortical screws self tapping , cortical screws self tapping, 1 mm dia, length 2mm to 20 mm ( 2mm increments ) ss , cortical screws self tapping, 1.5 mm dia, length 2mm to 20 mm ( 2mm increments ) ss , cortical screws self tapping, 2 mm dia , length 2mm to 20 mm ( 2mm increments ) ss , cortex screws dia 2.4mm, self tapping, l14 40mm, ss , cortical screws self tapping, 2.5 mm dia, length 2mm to 20 mm ( 2mm increments ) ss , cortical screws self tapping, 2.7 mm dia, length 6mm to 30 mm ( 2mm increments ) ss , cortical screws self tapping, 3.5 mm dia, length 10mm to 40 mm ( 2mm increments ) ss , cortical screws self tapping, 3.5 mm dia, length 45mm to 85 mm ( 5mm increments ) ss , cortical screws self tapping, 4.5 mm dia, ( 10mm to 40 mm ) ss , cortical screws self tapping, 4.5 mm dia, short threaded ( 42mm to 80 mm ) ss , cortical screws self tapping, 4.5 mm dia, short threaded ( 82mm to 140 mm ) ss , cortical screw 1mm l ( 6 14 ) mm, self tapping, titanium , cortical screw 1.3mm l ( 6 18 ) mm, self tapping, titanium , cortical screw 1.5mm l ( 6 24 ) mm, self tapping, titanium , cortical screw 2.0mm l ( 6 38 ) mm, self tapping, titanium , cortical screw 2.4mm l ( 6 40 ) mm, self tapping, titanium , cortical screw 2.7mm l ( 6 40 ) mm, self tapping, titanium , cortical screw 3.5mm length 10 30mm self tapping ( titanium ) , cortical screw 3.5mm length 32 60mm self tapping ( titanium ) , cortical screw 4.5mm length 10 40mm self tapping ( titanium ) , cortical screw 4.5mm length 42 80mm self tapping ( titanium ) , cancellous screws self tapping , cancellous screws self tapping fully threaded, 3.5 mm dia, length 10mm to 30mm ( 2mm increments ) ss , cancellous screw self tapping fully threaded, 3.5mm dia, length 35mm to 60mm ( 5mm increment ) ss , cancellous screw self tapping fully threaded, 3.5mm dia, length 65mm to 105mm ( 5mm increment ) ss , cancellous screws self tapping fully threaded , 3.5 mm dia, length 10mm to 30mm ( 2mm increments ) titanium , cancellous screw self tapping fully threaded, 3.5mm dia, length 35mm to 60mm ( 5mm increment ) titanium , cancellous screw self tapping fully threaded, 3.5mm dia, length 65mm to 105mm ( 5mm increment ) titanium , cancellous screws , cancellous bone screws 4.0mm, fully threaded l ( 10mm 60mm ) with 2mm increment, ss , cancellous bone screws 4.0mm , partially threaded l ( 10mm 58mm ) with 2mm increment, ss , cancellous bone screws 4.0mm , partially threaded l ( 60mm 90mm ) , ss , cancellous screws 4.0 mm dia ( partially threaded ) length 10mm to 30mm ( 2mm increments ) titanium , cancellous screws 4.0 mm dia ( partially threaded ) length 35mm to 60mm ( 5mm increments ) titanium , cancellous bone screw 4.0mm , fully threaded, l ( 10mm 60mm ) , titanium , cancellous screws 6.5mm dia 16mm thread length 25mm to 70mm ( 5mm increments ) ss , cancellous screws 6.5mm dia 16mm thread length 75mm to 110mm ( 5mm increments ) ss , cancellous screws 6.5mm dia 32mm thread length 25mm to 70mm ( 5mm increments ) ss , cancellous screws 6.5mm dia 32mm thread length 75mm to 110mm ( 5mm increments ) ss , cancellous bone screws 6.5mm, fully threaded, l ( 20mm 110mm ) with 5mm increments, ss , cancellous screws 6.5mm dia 16mm threaded length 25mm to 70mm ( 5mm increments ) titanium , cancellous screws 6.5mm dia 16mm threaded length 75mm to 110mm ( 5mm increments ) titanium , cancellous screws 6.5mm dia 32mm partially threaded length 30mm to 70mm ( 5mm increments ) titanium , cancellous screws 6.5mm dia 32mm partially threaded length 75mm to 120mm ( 5mm increments ) titanium , cancellous screws 6.5mm , fully threaded length 45mm to 150mm ( 5mm increments ) titanium , malleolar screws , malleolar screw 4.5mm l ( 25mm 70mm ) with 5mm increment, ss , malleolar screws 4.5 mm dia, length 25mm to 80mm ( 5mm increments ) , titanium , cannulated screw , cannulated cancellous screws 3.5 mm self drilling short thread, l 10mm 30mm ( 2mm increments ) ss , cannulated cancellous screws 3.5 mm self drilling full thread, l 10mm 30mm ( 2mm increments ) ss , cannulated cancellous screws 3.5 mm self drilling short thread, l 10mm 30mm ( 2mm increments ) titanium , cannulated cancellous screws 3.5 mm self drilling full thread, l 10mm 30mm ( 2mm increments ) titanium , cannulated cancellous screws 4 mm dia short thread 20mm 60mm ( 2mm increments ) ss , cannulated cancellous screws 4 mm dia fully threaded 20mm 60mm ( 2mm increments ) ss , cannulated cancellous screws 4 mm dia short thread 20mm 60mm ( 2mm increments ) titanium , cannulated cancellous screws 4 mm dia fully threaded 20mm 60mm ( 2mm increments ) titanium , cannulated screw 4.5 mm short thread 20 to 60mm ( 2mm increments ) ss , cannulated screw 4.5 mm fully threaded 20 to 60mm ( 2mm increments ) ss , cannulated screw 4.5 mm short thread 20 to 60mm ( 2mm increments ) titanium , cannulated screw 4.5 mm fully threaded 20 to 60mm ( 2mm increments ) titanium , cannulated screw 6.5 mm short thread 30 to 60mm ( 5mm increments ) ss , cannulated screw 6.5 mm short thread 65 to 130mm ( 5mm increments ) ss , cannulated screw 6.5 mm fully threaded 30 to 60mm ( 5mm increments ) ss , cannulated screw 6.5 mm fully threaded 65 to 130mm ( 5mm increments ) ss , cannulated screw 6.5 mm short thread 30 to 60mm ( 5mm increments ) titanium , cannulated screw 6.5 mm short thread 65 to 130mm ( 5mm increments ) titanium , cannulated screw 6.5 mm fully threaded 30 to 60mm ( 5mm increments ) titanium , cannulated screw 6.5 mm fully threaded 65 to 130mm ( 5mm increments ) titanium , large cannulated cancellous screws 7.0 mm dia, 16mm thread length 50mm to 120mm ( 5mm increament ) ss , large cannulated cancellous screws 7.0 mm dia 32mm thread length 50mm to 120mm ( 5mm increment ) ss , large cannulated cancellous screws 7.0 mm dia, 16mm thread length 50mm to 120mm ( 5mm increament ) titanium. , large cannulated cancellous screws 7.0 mm dia 32mm thread length 50mm to 120mm ( 5mm increment ) titanium , locking head screw , locking screw dia 2.7mm ( head 2.4 ) , self tapping l 14mm to 60mm , ss , locking screw dia 2.7mm ( head 3.5 ) , self tapping l 20 mm to 60mm , ss , locking head screw 3.5mm, self tapping l ( 10mm 24mm ) ( 2mm increment ) , ss , locking head screw 3.5mm, self tapping l ( 26mm 48mm ) ( 2mm increment ) , ss , locking head screw 4.5mm self tapping size 16 85mm ss , locking head screw 5.0 mm, l 10 48 mm ( 2mm increment ) ss , locking head screw 5.0 mm , l 50 85 mm ( 2mm increment ) ss , locking head cancellous screw 5.0 mm , l 50 85 mm ( 2mm increment ) ss , locking cancellous screw 6.5 mm, l 20 100 mm ss , locking head screws 2.0mm self tapping l6 30mm titanium , locking head screws 2.4 mm self tapping l6 30mm titanium , locking screw dia 2.7mm ( head 2.4 ) , self tapping l 14mm to 60mm , titanium , locking screw dia 2.7mm ( head 3.5 ) , self tapping l 20 mm to 60mm , titanium , locking head screw 3.5mm, self tapping l ( 10mm 24mm ) ( 2mm increment ) , titanium , locking head screw 3.5mm, self tapping l ( 26mm 48mm ) ( 2mm increment ) , titanium , locking head screw 4.5mm self tapping size 16 85mm ( titanium ) , locking head screw 5.0 mm l 10 48 mm ( 2mm increment ) titanium , locking head screw 5.0 mm l 10 48 mm ( 2mm increment ) , titanium , locking head screw 5.0 mm l 50 85 mm ( 5mm increment ) , titanium , locking head cancellous screw 5.0 mm l 50 85 mm ( 5mm increment ) , titanium , cannulated locking head screw 5 mm, l 25 75 mm, ss , cannulated locking head screw 5 mm, l 80 120 mm, ss , cannulated locking head screw 5 mm, l 25 75 mm, titanium , cannulated locking head screw 5 mm, l 80 120 mm, titanium , locking cancellous screw 6.5 mm, l 20 60 mm, titanium , locking cancellous screw 6.5 mm, l 65 100 mm , titanium , herbert screw , headless compression screws 2.4mm, self drilling, cannulated, length 9 30mm, titanium. , headless compression screws 3 mm, self drilling, cannulated, length 10 40mm, titanium. , headless compression screws short threaded 4.5 mm, selfdrilling, cannulated, length 20 60mm ( increment of 2 mm ) , titanium. , headless compression screws long threaded 4.5 mm, self drilling, cannulated, length 20 60mm ( increment of 2 mm ) , titanium. , headless compression screws short threaded 4.5 mm, self drilling, cannulated, length 65 80mm ( increment of 5 mm ) , titanium. , headless compression screws long threaded 4.5 mm, self drilling, cannulated, length 65 80mm ( increment of 5 mm ) , titanium. , headless compression screws short threaded 6.5 mm, self drilling, cannulated, length 20 60mm ( increment of 2 mm ) , titanium. , headless compression screws long threaded 6.5 mm, self drilling, cannulated, length 20 60mm ( increment of 2 mm ) , titanium. , headless compression screws short threaded 6.5 mm, self drilling, cannulated, length 65 100mm ( increment of 5 mm ) , titanium. , headless compression screws long threaded 6.5 mm, self drilling, cannulated, length 65 100mm ( increment of 5 mm ) , titanium. , shaft screw 3.5 mm , l 12 60 mm, ss , shaft screw 4.5 mm , l 22 80 mm, ss , washer , washer for 4.0 mm cancellous screws, ss , washer for 4.5 mm malleolar screws, ss , washer for 6.5 mm cancellous screws, ss , spiked washer for cancellous bone screw 6.5mm dia 13.5mm x 6mm, ss , spiked washer for 4.0mm cancellous screw, ss , washer 10 mm dia., titanium , washer, 13.0 mm dia., titanium , hemispherical washer for 6.5 mm screws, ss , washer holding clip , universal items , drill bit , drill bit ( stainless steel ) , 1.0 mm , drill bit ( stainless steel ) , 1.5 mm , drill bit ( stainless steel ) , 2mm, l 85 mm , 2 flute , drill bit ( stainless steel ) with quick coupling end, 2.5mm, l 100 mm , drill bit 2.5mm with quick coupling end, titanium. , drill bit ( stainless steel ) 2.7mm , 2 flute with quick coupling end , drill bit ( stainless steel ) 2.7mm 3 flute with quick coupling end , drill bit ( stainless steel ) 3.2mm , 2 flute with quick coupling end , drill bit ( stainless steel ) 3.2mm , 3 flute with quick coupling end , drill bit ( stainless steel ) 3.5mm with quick coupling end , drill bit ( stainless steel ) 4.5mm with quick coupling end , drill bit ( stainless steel ) 3.5mm extra long , 2.8mm graduated drill bit for locking compression plate, ss , cannulated drill bit , cannulated drill bit 2.5 mm dia, ss , cannulated drill bit 2.7 mm dia, ss , cannulated drill bit 3.2 mm dia, ss , cannulated drill bit 3.5 mm dia, ss , cannulated drill bit 4.5 mm dia, ss , cannulated drill bit 5.0 mm dia, ss , bone tap , bone tap with t handle 1.5mm , bone tap with t handle 2.0mm , bone tap with t handle 2.7mm , bone tap with t handle 3.5mm , bone tap with t handle 4.5mm , bone tap with t handle 6.5mm , cannulated bone tap 2.5 mm dia , cannulated bone tap 3.5 mm dia , cannulated bone tap 4.5 mm dia , cannulated bone tap 6.5 mm dia , cannulated bone tap 7.0 mm dia , quick coupling handle & tap set , quick coupling handle. , quick coupling bone tap, 3.5 mm. , quick coupling bone tap, 4.5 mm. , screw driver , screw driver non canulated 2.0mm, hexagonal , screw driver non canulated 2.7mm, hexagonal , screw driver non canulated 3.5mm, hexagonal , screw driver non canulated 4.5mm, hexagonal , screw driver canulated 3.5mm, hexagonal , screw driver canulated 4.5mm, hexagonal , screw driver canulated 7.0mm, hexagonal , screw driver star shaped 3.5 mm , screw driver star shaped 4.5 mm , torque limiting screw driver for 3.5mm locking head screw , torque limiting screw driver for 4.5 / 5.0mm locking head screw , quick coupling handle with quick coupling screw driver shaft , 3.5 mm , quick coupling handle with quick coupling screw driver shaft , 4.5 mm , staples , u type staple 3mm dia 10mm 35mm length ( at 5 mm increments ) , coventary staple 5mm, 10mm, 15mm step , bone cement , bone cement with low viscosity 20g. , bone cement with medium viscosity 20g. , bone cement with high viscosity 20g. , bone cement with low viscosity 40g. , bone cement with medium viscosity 40g. , bone cement with high viscosity 40g. , bone cement with gentamycin, low viscosity 20g. , bone cement with gentamycin, medium viscosity 20g. , bone cement with gentamycin, high viscosity 20g. , bone cement with gentamycin, low viscosity 40g. , bone cement with gentamycin, medium viscosity 40g. , bone cement with gentamycin, high viscosity 40g. , bone cement with gentamycin+clindamycin, 40g. , bone cement with gentamycin+vancomycin, 40g. , bone cement with tobramycin, 40g. , bone cement mixing bawl with spatula, ss , disposable cement gun. , re usable cement gun set, ( autoclavable ) . , re usable cement gun with accessories ( autoclavable ) . , only accessories for cement gun. , re usable vacuum mixing cement gun set, ( autoclavable ) , re usable cement gun with vacuum mixing ( autoclavable ) . , accessories for vacuum mixing cement gun. , vacuum pump. , gentamycin beads ( the beads should be attached in a surgical wire to form a chain. ) , gentamycin cement beads 3 to 5 mm dia. ( 10 beads ) , gentamycin cement beads 3 to 5 mm dia. ( 30 beads ) , gentamycin cement beads 7 to 9 mm dia. ( 10 beads ) , gentamycin cement beads 7 to 9 mm dia. ( 30 beads ) , hip joints , hemiarthroplasty , a m prosthesis 37 mm to 57 mm with 2 mm increment , bipolar prosthesis ( pre sterile ) , fixed bipolar head with fenestrated femoral stem small / medium / large, ss , bipolar hip prosthesis ( talwarkar type ) 37mm to 57mm with 2mm increment , cemented modular bipolar ( us fda approved ) , cemented bipolar hip prosthesis set , bipolar hip prosthesis ( modular type ) cobalt chrome cup & head various sizes with various neck length , bipolar hip prosthesis ( modular type ) femoral stem various sizes, cemented , cement restrictor , stem centralizer , non cemented bipolar ( us fda approved ) , non cemented bipolar hip prosthesis set , non cemented bipolar hip prosthesis ( modular type ) cup & head various sizes with various neck length. , non cemented bipolar hip prosthesis ( modular type ) ha coated femoral stem various sizes. , non cemented bipolar hip prosthesis set , non cemented bipolar hip prosthesis ( modular type ) cup & head various sizes with various size neck length. , non cemented bipolar hip prosthesis ( modular type ) porous coated femoral stem various sizes. , total hip arthroplasty ( us fda approved ) , cemented basic thr ( us fda approved ) , basic cemented total hip system , total hip acetabular cups various sizes , total hip metal head dia 22, 26, 28mm with various neck length , femoral stem various sizes. , stem centralizer , cement restrictor , basic cemented total hip system with lpw ( us fda approved ) , modular stem ( stainless steel ) small, medium, large , double tappered, highly polished, collar less, self centering, variable offsets. , modular internal head 22, 26, 28 mm ( stainless steel ) with various neck length. , modular thr 10 degree acetabular cup with lpw: , stem centralizer , cement restrictor , basic cementless hip system ( us fda approved ) , basic cementless hip system , cementless hip system fully ha coated titanium alloy femoral stem with various sizes. , cementless hip system metal head 28 mm with variable neck length. , cementless hip system acetabular cup cementless poro coated with option of screws. , cementless hip system acetabular highly crosslink poly cup liner with 10 degree lpw different sizes. , bone screw to fix the cup. , basic cementless hip system , cementless hip system porous coated titanium alloy femoral stem with various sizes. , cementless hip system metal head 28 mm with variable neck length. , cementless hip system acetabular cup cementless poro coated with option of screws. , cementless hip system acetabular highly crosslink poly cup liner with 10 degree lpw different sizes. , bone screw to fix the cup. , basic cementless hip system , cementless hip system proximal ha coated titanium alloy femoral stem ( double tappered ) various sizes. , cementless hip system metal head 28 mm with variable neck length. , cementless hip system acetabular cup cementless ha coated with option of screws. , cementless hip system acetabular highly crosslink poly cup liner with 10 degree lpw different sizes. , bone screw to fix the cup. , advanced uncemented thr ( us fda approved ) , advanced cementless hip system , cementless hip system ha / poro coated femoral stem, various sizes. , cementless hip system metal head 32, 36 mm with variable neck length. , cementless hip system acetabular cup ha / poro coated with option of screws, should accomodate 32, 36 mm head with same cup. , cementless hip system acetabular highly crosslink polycup liner with 10 degree lpw different sizes, should accommodate 32, 36 head. , bone screw to fix the cup. , advanced cementless hip system , cementless hip system ha / poro coated femoral stem, different sizes. , cementless hip system ceramic head ( bilox delta ) 32, 36 mm with variable neck length. , cementless hip system acetabular cup ha / poro coated with option of screws, should accommodate 32, 36 mm head with same cup. , cementless hip system acetabular highly crosslink poly cup liner with 10 degree lpw different sizes, should accommodate 32, 36 head. , bone screw to fix the cup. , advanced cementless hip system , cementless hip system ha / poro coated femoral stem, different sizes. , cementless hip system ceramic head ( bilox delta ) 32, 36 mm with variable neck length. , cementless hip system acetabular cup ha / poro coated with option of screws, should accomodate 32, 36 mm head with same cup. , cementless hip system acetabular ceramic liner, should accommodate 32, 36 head. , bone screw to fix the cup. , high performance thr ( us fda approved ) , high performance cementless hip system , primary femoral stem: non cemented primary femoral tapered short, rounded tipped short stem made of titanium alloy porocoated with layer of ha allowing preservation of femoral neck. , non cemented acetabular cup: non cemented hemispherical acetabular cup made of titanium alloy with peripheral anti rotation fins with inbuilt ceramic liner made of zirconia & alumina, with different diameters. , ceramic femoral head for cup: ceramic femoral head with various sizes. , femoral adaptor sleeve: femoral adaptor sleeve made of titanium alloy with clean taper fit and compatible with the inner ceramic taper of the femoral head with different sizes , high performance cementless hip system , uncemented femoral stem : uncemented primary femoral tapered blade style stem made of titanium alloy with poro coating with high friction titanium coating. with anterior & posterior longitudinal flute, should be proximal femoral bone preserving. , bilox delta ceramic head 32, 36 mm with variable neck length. , uncemented hip system acetabular cup ha / poro coated with option of screws, should accomodate 32, 36 mm head with same cup. , uncemented hip system acetabular highly crosslink poly cup liner with 10 degree lpw , various sizes, should accommodate 32, 36 head. , bone screw to fix the cup. , high performance cement less hip system , un cemented hip system ha / poro coated femoral stem, various sizes. , bilox delta ceramic head 32, 36 mm with variable neck length. , un cemented trabecular metal cup different sizes accommodate large head with screw option. , uncemented hip system acetabular highly crosslink polycup liner with 10 degree lpw , various sizes, should accommodate 32, 36 head. , bone screw to fix the cup. , high performance cementless hip system , uncemented femoral stem, proximal sleeve, femoral head femoral head: 36 mm ceremic head of alumina & zerconia with different neck length. stem: noncemented proximal loading option titanium alloy, tapered with coronal slot & distal flutes , variable neck length diameter & offset. sleeve: porocoated proximal femoral sleeve with locking mechanism with femoral stem , various sizes. , noncemented titanium acetabular cup with gription poro coating with locking mechanism for liner, various sizes with screw locking option. , highly crosslink poly cup liner with 10 degree lpw different sizes, should accommodate 32, 36 head. , bone screw to fix the cup. , revision cemented thr ( us fda approved ) , revision cemented hip system , cemented long stem, various sizes & offsets. , acetabular cup with lpw. , large diameter head 32, 36 , stem centralizer , cement restrictor , revision uncemented thr ( us fda approved ) , revision cementless hip system , revision uncemented acetabular cup : multi hole titanium alloy actebular shells with a full 180 degree hemisphere poro coated with option of multiple screw holes for fixation with options to fit all liners ( metal, ceramic & poly ) of various sizes . , revision acetabular screw: 5.5 titanium alloy acetabular revision screws for peripheral area of cup in various sizes. , 6.5 mm titanium self tapping cancellous screw for use in central area of the cup. , uncemented hip system acetabular highly crosslink poly cup liner with 10 degree lpw , various sizes, should accommodate 32, 36 head. , ceramic femoral head for cup: ceramic femoral head made of alumina & zirconia with various sizes. , distally interlocked femoral reconstruction revision hip system ha coated distal locking option with various diameter & length with the provision of reconstruction of trochanter & cerclage cable hole. , distal interlocked screw titanium distal locking self tapping various sizes. , cementless acetabular reconstruction system , acetabular reconstruction system acetabular reconstruction titanium ring with ha coated acetabular shell with option of multiple central & peripheral screws with corresponding screws ( 8 screws ) . , posteriorly lipped highly cross linked poly liner various sizes. , bilox delta ceramic femoral head for cup, various sizes. , femoral revision system distally fixed revision femoral stem, porous coated, with calcar replacement options different diameter. , acetabular mesh, ss , acetabular mesh, titanium , femoral mesh, titanium , acetabular cage, various sizes, titanium , knee arthroplasty ( us fda approved ) , uni condylar mobile knee system consisting of femoral components, tibial inserts & tibial tray of various sizes. , total knee system , basic tkr pcl sacrificing ( us fda approved ) , femoral component , co cr, various sizes , tibial component, titanium alloy, various sizes , tibial insert, various sizes , patellar button, various sizes , high flex knee system ps ( us fda approved ) , total condylar, pcl substituting , fixed bearing / mobile bearing with the provision of high flex knee system consist of following components: femoral component, tibial component, tibial insert. , high flex knee system cr ( us fda approved ) , cruciate retaining high flexion knee system consist of following components: femoral component, titanium tibial tray , highly cross linked poly insert . , advanced knee system ( us fda approved ) , advanced knee system , posterior stabilized fixed bearing femoral components with ability to attach extender stems. , highly cross linked poly insert with locking mechanism, with option of both cruciate substituting and retaining various sizes. , co cr tibial tray with ability to attach extension stem, various sizes. , patella along with three pegs. , patient specific total knee prosthesis ( us fda approved ) : consists of femoral & tibial component, tibial insert. the tkr design should be patients own ct or mri based , the mechanical based alignment to be matched with patients own mechanical axis, the cutting block must provide patients own reference for distal femoral & proximal tibial cut, it should have robust design and should have faster turn around time ( less than 4 weeks ) . , revision knee system ( us fda approved ) , revision knee system , semi constraint total knee prosthesis: femoral component with the ability to accept any kind of metal augments & offset extension stem. , femoral metal augment for distal & posterior femur various sizes , femoral extension stem various offset & sizes , tibial component with ability to accept various sizes tibial augmentation blocks, wedges & extension stem. , semi constraint tibial knee inserts all sizes , metal tibial wages step, hemi & full of various sizes and thickness , tibial extension stem various offset & sizes , semi constraint total knee prosthesis system ***** , semi constraint total knee prosthesis: femoral component with the ability to accept any kind of poro coated metaphyseal sleeves & offset extension stem. , metaphyseal porocoated femoral sleeves, various sizes. , femoral extension stem various offset & sizes , semi constraint mobile bearing tibial knee inserts all sizes , tibial component mobile bearing tray with ability to accept various sizes porocoated metaphyseal sleeves & extension stem. , metaphyseal porocoated tibial sleeves, various sizes. , tibial extension stem various offset & sizes , cable wiring system for periprosthetic fractures. , cable wiring system ss , cable wire with sleeves, ss , sleeve for cable wire ss , cable wiring system co cr , cable wire with sleeves, co cr , sleeve for cable wire co cr , shoulder arthroplasty. , hemi shoulder arthroplasty. , neer prosthesis fixed shoulder various sizes. , modular hemi shoulder arthroplasty. ( us fda approved ) , modular hemi shoulder set **** , hemi shoulder stem, co cr . , hemi shoulder humeral head , total shoulder replacement prosthesis. ( us fda approved ) , total shoulder replacement prosthesis system , total shoulder humeral stem with holes in fins for muscle and soft tissue reconstruction cemented / uncemented. , humeral head. , glenoid prosthesis cross linked poly. , reverse shoulder arthroplasty. ( us fda approved ) , reverse shoulder prosthesis system , cemented humeral stem with 0 10 degree retroversion, co cr. , non cemented humeral stem with 0 10 degree retroversion, co cr. , high mobility humeral polythelene cup. , glenoid implant with fixation screws. , locking / non locking fixation screws. , pulse lavage , pulse lavage wound debridement system ( disposable battery operated with concurrent suction and fan spray tip ) , spacers for hip and knee , antibiotic spacers for hip joint ( high resistance bone cement body loaded with antibiotic ) , all sizes. , antibiotic spacers for knee joint , all sizes , elbow arthroplasty ( us fda approved ) , elbow prosthesis total elbow implant with accessories i ) humeral component various sizes ulna component various sizes , external fixator , single pin clamp , double pin clamp , open double pin clamp , twin adjustable clamp straight , twin adjustable clamp curved , transverse clamp , connecting clamp , single pin clamp with extension plate , double pin clamp with extension plate. , connecting rod 5.0 mm , spanner 11 mm , t wrench 11 mm , box spanner 11mm , triple tocar set with handle , tubular rod 4 , tubular rod 6 , tubular rod 8 , tubular rod10 , tubular rod 12 , tubular rod 14 , tubular rod 16 , tubular rod 18 , tubular rod 20 , tube to tube clamp , threaded schanz pins ( self tapping ) dia. 3.5 mm, shaft 4 mm , short threadedl 125mm. , threaded schanz pins ( self tapping ) 4.0 mm, short threaded, l 100 200 mm , threaded schanz pins ( self tapping ) 4.0 mm long threaded, l 100 200 mm , threaded schanz pins ( self tapping ) 4.5 mm short threaded, l 100 200 mm , threaded schanz pins ( self tapping ) 4.5 mm long threaded, l 100 200 mm , threaded schanz pins ( self tapping ) 5.0 mm short threaded, l 100 200 mm , threaded schanz pins ( self tapping ) 5.0 mm long threaded, l 100 200 mm , cancellous front threaded 5 mm schanz pins, thread l 16mm, l 100 200 mm. , cancellous front threaded 5mm schanz pins, thread l 32 mm, l 100 200 mm. , cancellous front threaded 5mm schanz pins , thread l 50 mm, l 100 200 mm . , external fixation forearm and metacarpals , threaded schanz pins 2.0 mm . , threaded schanz pins 2.5 mm . , threaded schanz pins 3.0 mm . , threaded schanz pins 3.5 mm. , small external fixator for forearm , small single pin clamp 4.0 x 2.5 mm for 2 & 2.5 mm schanz pins. , small single pin clamp 4.0 x 4.0 mm for 3.5 mm schanz pins. , small connecting clamp 4.0 x 4.0 mm , connecting rods 4.0 mm dia length 100 to 300mm ( 50mm increment ) , open small single pin clamp 4.0 x 2.5 mm , open small connecting clamp 4.0 x 4.0 mm , small compression distraction device size: 60mm, 75mm, 100mm, 150mm , spanner 8 mm , t wrench 8 mm , ball & socket type distractor set with 360 degree rotation compatible with 2.5 mm & 3.5 mm schanz screw. ( rate to be quoted for one set consist of ball & socket distractor assembly with two 2.5 mm & two 3.5 mm schanz screw ) , mini external fixator set for hand, complete set ( a to g ) , k wire with threaded tip, 1.25 mm, l 100 mm , k wire with threaded tip, 1.60 mm, l 100 mm , schanz pin 2.5 mm , various sizes , connecting rod 3 mm , various sizes , universal clamps for 1.25 mm & 1.60 mm wire , connecting clamps , dc assembly , femoral distractor set. , limb reconstruction system ( rail road ) for adult : bone lengthening / bone transport . , rail rod, l 200 400 mm , central clamp , swivel clamp , end clamp , schanz pin 6 mm, tappered 4.5 mm to 3.5 mm. , schanz pin 6 mm, tappered 6 mm to 5 mm. , schanz pin 6 mm, tappered 4.5 mm to 3.5 mm with hydroxy apetite ( ha ) coating for threads. , schanz pin 6 mm, tappered 6 mm to 5 mm with hydroxy apetite ( ha ) coating for threads. , limb reconstruction system ( rail road ) for pediatrics : bone lengthening / bone transport . , rail rod, l 150 250 mm , central clamp , swivel clamp , end clamp , schanz pin 4 mm, tappered 3.5 mm to 3 mm. , schanz pin 6 mm , tappered 4.5 mm to 3.5 mm with hydroxy apetite ( ha ) coating for threads. , ctev set , ctev set small ( components ) link joint 30, connecting rods ( 2.5mm ) st. 4 3, 6 2, 8 2, z rods 2, l rods large 2, small 2, distractor 4mm 4 2, 6 2, foot plate 1, k wires 2mm 6 2, 1.6mm 6 6, allen keys , ctev set medium ( components ) link joints 30, connecting rods ( 3.0mm ) st. 5 3, 6 2, 10 2, z rods 2, l rods ( large ) 2, small 2, distractor 4mm 4 2, , 6 2, foot plate 1, k wires ( 2.0mm ) 5 3, 6 2, allen keys , ctev set large ( components ) clamps aescualp type 4x2.5 9, 4x4 12, connecting rods 6 5, 12 2, distractors 4mm 6 2, d.c.rods 2, foot plate 1, k wires 2.5mm5 5, 2.0mm 6 6, allen keys , spring jess fixator set for ctev. , ilizarov ring fixator system ( complete system of ilizarov from 460il 1 to 460il 67 ) , ilizarov half rings ( the holes should match with the stainless steel ring ) sizes 110, 120, 130, 140, 150, 160, 180, 200, 220 mm , carbon fiber frame , ilizarov half rings ( the holes should match with the carbon ring ) sizes 110, 120, 130, 140, 150, 160, 180, 200, 220 mm, ss , ilizarov fixator set 5 / 8 ring ( sizes 110, 120, 130, 140, 150, 160, 180, 200 mm ) , ss , ilizarov cannulated bolt. , ilizarov connection bolt. , ilizarov slotted bolt. , ilizarov nuts. , ilizarov bushing. , ilizarov telescopic rods 100mm , ilizarov telescopic rods 150 mm , ilizarov telescopic rods 200 mm , ilizarov telescopic rods 250mm , ilizarov telescopic rods 300 mm , ilizarov telescopic rods 350 mm , ilizarov graduated telescopic rods 60mm, , ilizarov graduated telescopic rods 100 mm , ilizarov graduated telescopic rods 150 mm , ilizarov graduated telescopic rods 200mm, , ilizarov graduated telescopic rods 250 mm , ilizarov threaded rods 100mm 200mm ( 50 mm increments ) up to 400mm , ilizarov male post , ilizarov female post , ilizarov male hinge , ilizarov female hinge , ilizarov male hinge, low profile , ilizarov female hinge, low profile , ilizarov hinges 90 degree standard , ilizarov hinges 90 degree low profile , ilizarov spacing washers , 1.5 mm , ilizarov spacing washers , 2 mm , ilizarov split locking washers , 2 mm , ilizarov slotted washers , 4 mm , ilizarov flat sided washers, 2mm , ilizarov flat sided washers , 4 mm , ilizarov conical couple washer , ilizarov oval washer , nylon washer , nylon insert nut. , ilizarov italian arch , ilizarov threaded socket & buckles. , ilizarov short connection plate , ilizarov curved connection plate , ilizarov wire fixation nuts + bolts central hole , ilizarov wire fixation nuts + bolts side hole , ilizarov square nut , ilizarov threaded rod 60, 80, 100, 120, 150 mm. , ilizarov threaded rod 200, 250, 300, 350, 400 mm , ilizarov slotted threaded rod 60, 80, 100 mm. , ilizarov oblique support connection. , ilizarov rotational & transational device. , ilizarov twisted plate , ilizarov multiple pin fixation clamp. , ilizarov single schanz pin fixation bolt , wires for ilizarov bayonet tip, cortical 1.5x ( 300 400mm ) , wires for ilizarov bayonet tip, cortical 1.8x ( 300 400mm ) , wires for ilizarov trocar tip 1.5x ( 300 400mm ) , wires for ilizarov trocar tip 1.8x ( 300 400mm ) , stopper wires for ilizarov ( olive wires ) one piece, 1.5x ( 300 400mm ) , stopper wires for ilizarov ( olive wires ) one piece, 1.8x ( 300 400mm ) , wrench shoes small, medium, large , spanner for ilizarov fixator, 10 mm , t wrench for ilizarov fixator , box spanner , universal hinge , wrencho cubes , wire tensioner dynamic , wire fixation buckle , suction drain , negative suction drainage set ( disposable ) 10fg to 18fg sizes single tube , negative suction drainage set ( disposable ) 10fg to 18fg sizes double tube sterile disposable drapes ( all drapes should be single use with well packed in peel off pouche with inbuilt ethylene oxide ( e.o ) indicator having shelf life not less than 3 years, product should have isi / iso certified ) & should have sterilization certificate from sterilizing source. , sterile u draps with adhesive strip ( double layer disposable ) , 200 x 240 cm medical fabric not less than 60 gsm , sterile u draps with adhesive strip ( double layer disposable ) , 160 x 200 cm medical fabric not less than 60 gsm , sterile knee o drape with adhesive strip ( reinforced impermeable 3 layer fabric ) , 200x320 cm , sterile elbow drape with adhesive strip ( reinforced impermeable 3 layer fabric ) , 150 x 250 cm , sterile knee drape with adhesive strip ( reinforced impermeable 3 layer fabric ) with absorbent centre sheet size 75x100 cm & total size 120 x 160 cm. , sterile hip u drape with adhesive strip ( reinforced impermeable 3 layer fabric ) with absorbent centre sheet size 100x150 cm & total size200 x 300 cm. , sterile hip u drape with adhesive strip ( reinforced impermeable 3 layer fabric ) with absorbent centre sheet size 100x150 cm & attached leg pouch, total size 200 x 240 cm, medical grade sms ( sms=spun +melt bloun+spun ) fabric. , sterile spinal drape ( reinforced impermeable 3 layer fabric ) with adhesive strip on central aperture , 8x12 cm, with absorbent centre sheet size 100x150 cm , total size 150x300 cm. , sterile knee arthroscopy drape ( reinforced impermeable 3 layer fabric ) size: 200x300cm with fluid collection pouch. , sterile disposable wrapping drape ( ldpe ) , 15 x 100 cm , sterile disposable wrapping drape ( ldpe ) , 30 x 150 cm , sterile cling film roll, 12x100 cm. , face mask with anti fog shield ( 4 ply ) . , sterile disposable legging ( pair packing ) with fluid repellant fabric. , sterile c arm cover ( pair ) . , screen cover ( transparent ) with adhesive strip, 160x200 cm , mackintosh sheet, autoclavable, size 1 x 2 meter ( rubber ) . , disposable sterile water proof sheets ( double packed ) , 150x200 cm. , incise drape 20x30 cm , incise drape 30x30 cm , incise drape 30x45 cm , incise drape 40x45 cm , incise drape 45x60 cm , povidone iodine impregnated incise drape 20x ( 20 30 ) cm , povidone iodine impregnated incise drape 25x ( 30 40 ) cm , povidone iodine impregnated incise drape 30x ( 45 55 ) cm , povidone iodine impregnated incise drape 35x ( 55 65 ) cm , povidone iodine impregnated incise drape 40x60 cm , trolley cover , size 125x150cm , trolley cover, size 150x200 cm , camera cover ( pre sterile disposable ) with 2 tying string. , cable cover ( pre sterile ) , slings & supports , stockinette ( disposable ) , 2x 5 meter ( cotton ) . , stockinette ( disposable ) , 3x 5 meter ( cotton ) . , stockinette ( disposable ) , 4x 5 meter ( cotton ) . , stockinette ( disposable ) , 5x 5 meter ( cotton ) . , stockinette ( disposable ) , 6x 5 meter ( cotton ) . , arm sling pouch should be made up of soft quality fabric, should have non stretching strap, adjustable, closure with velcro plastic buckles, s / m / l , arm sling pouch should be made up of soft quality fabric, should have non stretching strap, adjustable, closure with velcro plastic buckles, xl , ankle wrap, 3 elastic band with valcro closure, s / m / l , ankle wrap, 3 elastic band with valcro closure, extra large , ankle brace should be made up of foam fused fabric, should have semi rigid plastic splints on both side of brace, velcro closure and plastic buckles for locking, sizes s / m / l. , ankle brace should be made up of foam fused fabric, should have semi rigid plastic splints on both side of brace, velcro closure and plastic buckles for locking, sizes xl. , tennis elbow band ( high strength foam padded strap ) , s / m / l , tennis elbow band ( high strength foam padded strap ) , extra large , wrist binder with thumb support. , shoulder immobilizer s / m / l , shoulder immobilizer, extra large , cot finger splint ( u shaped to keep finger in straight position ) , s / m / l , frog splint ( four leg construction allow self closing for immobilization of dip joint in extension & pip joint in flexion ) , s / m / l , spoon splint ( to keep finger tip in extension ) , s / m / l , protector splint for finger tip injury ( + mark design to protect finger tip from all around ) , s / m / l , base ball splint for distal phalanx injury ( finger tip fold over design ) , s / m / l , mallet finger splint ( splint to keep dip joint in 10 degree hyper extension ) , s / m / l , finger extension splint ( spring wire construction for keeping finger in extension ) , s / m / l , finger flexion splint ( spring wire construction for keeping finger in flexion ) , s / m / l , thumb spica splint , knuckle bender splint , carpel tunnel splint day time , carpel tunnel splint night time , arm sling strap heavy duty strap with two way buckle system. , wrist & fore arm splint ( right & left ) , static wrist cock up splint ( right & left ) , s / m / l , dynamic wrist cock up splint ( right & left ) . , foot drop splint, s / m / l , foot drop splint, xl , boot and de rotation bar splint , compression stockings ( latex free ) with moderate compression option above knee, s / m / l , compression stockings ( latex free ) with moderate compression option below knee, s / m / l , resistance band for stage 1 to stage 6 ( for resistance rehabilitation exercise ) , various thickness. , bolster , s / m / l. , triangular pillow for abduction of hip. , silicon heel cushion ( right & left ) , s / m / l , silicon insole, s / m / l , silicon arch pad, s / m / l , silicon metatarsal pad, s / m / l , silicon toe spacer , cast shoe, s / m / l , cast shoe, xl , splints , kramer wire splint :width 7.5 cm, l 100 cms , kramer wire splint :width 10 cm, l 100 cms , thomas splint ( well padded thigh ring ) , small , thomas splint ( well padded thigh ring ) , medium , thomas splint ( well padded thigh ring ) , large , bohler brown splint , small , bohler brown splint, medium , bohler brown splint, large , bohlers stirrup, small , bohlers stirrup , medium , bohlers stirrup , large , screws for bohler stirrup , walker fixed type , walker adjustable & foldable ( coated aluminum frame work with comfortable hand grips. , auxiliary crutches ( adjustable height ) , aluminum , elbow crutches ( adjustable height ) , aluminum , walking stick, aluminum mono pod with handle grip and rubber tip. , walking stick, aluminum tri pod with handle grip and rubber tip. , walking stick, aluminum tetra pod with handle grip and rubber tip. , wheel chair ( foldable ) mag wheel, seat width 16 / 18, weight capacity > 99 kg, fixed arm rest, 8 solid caster, 24 solid rear wheel, double crossed bar. , wheel chair ( foldable ) with commode mag wheel, seat width 16 / 18, weight capacity > 99 kg, fixed arm rest, 8 solid caster, 24 solid rear wheel, double crossed bar. , wheel chair mag wheel, seat width 16 / 18, weight capacity > 99 kg, fixed arm rest, 8 solid caster, 24 solid rear wheel. , wheel chair with commode mag wheel, seat width 16 / 18, weight capacity > 99 kg, fixed arm rest, 8 solid caster, 24 solid rear wheel. , traction kits , lumbar traction kit with rod ( all sizes ) , cervical traction kit with rod ( all sizes ) soft foam padding , pelvic traction kit with rod. , b / k skin traction kit with velcro strap. , leg traction kit with pully. , buck pulley. , plastic pulley single. , balkan frame with accessories compatible with hospital beds. , paraffin wax, 1kg , paraffin wax, 5kg , gymnasium ball, 75 cm , physiotherapy clay, 1 kg , weight cuff, 1 / 2 kg . , weight cuff , 1 kg , weight cuff , 2 kg , weight cuff, 3 kg , instruments , bone marrow aspiration system , bone biopsy needle ( jamshidi ) , bone currate small , bone currate medium , bone currate large , bone nibbler small , bone nibbler medium , bone nibbler large , bone nibbler double action straight small , bone nibbler double action straight medium , bone nibbler double action straight large , bone nibbler double action curved small , bone nibbler double action curved medium , bone nibbler double action curved large , hammer small ( 250 gm ) , hammer medium ( 500 gm ) , hammer large ( 750 gm ) , bone cutter medium , bone cutter large , self retaining retractor without hinges, small , self retaining retractor without hinges, medium , self retaining retractor without hinges, large , self retaining retractor with hinges , small , self retaining retractor with hinges , medium , self retaining retractor with hinges , large , arthoscopic instruments and implants , knee arthoscopy , acl / pcl reconstruction set consist of a to i. , tibial tunnel guide system for acl reconstruction ( should have locking system with variable angle adjustment form 35 to 60 degree ) , cannulated flower tip drill bit with laser marking for calculation of bone tunnel length for acl reconstruction. size 5, 6, 7, 8, 9, 10, 11 mm , femoral off set guide for 4, 5, 6, 7 , 8 mm. , drill tip graft passing pin 2.4 mm. , drilling wire 2.4 mm. , graft preparation board. , tendon stripper, 7 mm dia., close ended , thickness tester , bio screw driver. , acl repair implants : stainless steel cannulated interference screws dia 7 10 mm l 20, 25, 30mm , acl repair implants : titanium cannulated interference screws dia 7 10 mm l 20, 25, 30mm , acl repair implants : titanium with rounded thread soft cannulated interference screws dia 7 10 mm l 20, 25, 30mm , acl repair implant : bio absorbable interference screw size 7 11mm, l 20 30mm , acl repair implant : tibial bio absorbable interference screw with proximal slop to flush fix in anterior tibial cortex size 7 11mm, l 20 30mm , acl repair implant : bio composite interference screw size 7 11mm, l 20 30mm , acl sheath fixation set , acl femoral fixation sheath with screw for tendon graft fixation, various sizes , acl tibial fixation sheath with screw for tendon graft fixation, various sizes , acl femoral fixation device ( metal pin ) , 15mm cortical length, l 40mm , acl femoral fixation device ( bio absorbable pin , various sizes ) , button for lateral cortical femoral fixation , button along with loop for acl reconstruction, various sizes , acl suture button with flexible loop for lateral femoral fixation, various sizes. , acl suture button with continuous loop for lateral femoral fixation, various sizes. , acl reconstruction button along with loop & preloaded with passing suture , l 15 35 mm , ligament staple in dia 8 11 mm , suture post ( flat head screw ) sizes 4.5x ( 25 50 ) mm , titanium , meniscal repair system of meniscal tear ( disposable ) , meniscal needle with continuous fiber wire needle , drainage / irrigation needle for knee arthroscopy. , shoulder arthroscopy , shoulder cannula disposable . , shoulder cannula reusable. , 1.9 mm anchore with #2 suture with handle , titanium , 2.7 mm anchore with #2 suture with handle , titanium , 2.8 mm anchore with #2 suture with handle, titanium , 3 mm anchore with #2 suture with handle , titanium , 3.5 mm anchore with #2 suture with handle , titanium , 5 mm suture anchore with #2 polyester suture , titanium , 5.5 mm fully threaded anchor #2 suture , titanium , 3 mm knotted bio absorbable anchor , 2.3 mm knot less bio absorbable anchor , 2.9 mm knot less bio absorbable anchor , 2.3 mm knot less peek anchor , 2.9 mm knot less peek anchor , 3.5 mm knot less bio absorbable anchor , 3.5 mm knot less peek anchor , 5.5 mm bio absorbable anchor with thread , all peek anchor for double & single row cuff repair. dia 4.5, 5.5 & 6.5 mm , suture passer 45 degree left and right , suture passer 90 degree left and right , suture shuttle needle. , uhmw # 2 number white / coloured suture with needles , uhmw # 2 number stripped colour suture with needles , acromio clavicular joint dislocation repair system having button on one side & suture disc on other side , connected with suture wire , normal saline 3 litre pack , radio frequency ablation probe ( different angle ) for arthroscopy, disposable ( please quote rate for one radio frequency ablation probe only and machine / generator to be provided by company for ablation probe use for surgery ) , spine implants ( us fda approved ) , cervical disc replacement system metal on poly. , cervical disc prosthesis metal on metal with anterior translation. , anterior cervical inter body fusion peek cage size , height 5 12 mm , anterior cervical peek inter body fusion spacer and plate with integrated double screws for each vertebra, 5 12 mm , anterior cervical peek inter body fusion spacer and plate with integrated single screw for each vertebra, 5 12 mm , low profile cervical locking fixation plate with 4 self drilling & self locking screw single level. , low profile cervical locking fixation plate with 6 self locking screw double level. , anterior mesh cage for cervical spine, titanium , variable angle anterior cervical plate with self drilling screw and inbuilt locking screw, single level with 4 screw , variable angle anterior cervical plate with self drilling screw and inbuilt locking screw, double level with 6 screw , variable angle anterior cervical plate with self drilling screw and inbuilt locking screw, three level with 8 screw , posterior cervical lateral mass screw system , posterior cervical system lateral mass screw 3.5 mm , various length, titanium , posterior cervical system lateral mass rod, titanium , pedical screw system for cervical spine , pedical screw for cervical spine 3.5 mm, various length, titanium , pedical screw rod for cervical spine, titanium , occipito cervical fixation rod plate system, small, titanium , occipito cervical fixation rod plate system, medium , titanium , occipito cervical fixation rod plate system, large, titanium , trans articular odontoid cannulated screw all sizes, titanium , pedicle screws system for dorso lumber spine , pedicle screws 4.5, 5.5, 6.5, 7.5 mm ( mono axial ) , titanium , pedicle screws 4.5, 5.5, 6.5, 7.5 mm ( poly axial ) , titanium , pedical screw rod, titanium , transverse connector, titanium , pedicle hook, titanium , sub laminar hook, titanium , facet hook, titanium , percutaneus cannulated pedicle screw system , percutaneus cannulated pedicle screw 4.5, 5.5, 6.5, 7.5 mm , titanium , percutaneus cannulated pedicle screws corresponding rod , titanium , pedical screw with break off plug system , pedical screw with break off plug , size 4.5, 5.5, 6.5, 7.5 dia length 20 70 mm , titanium , pedical screw with break off plug corresponding rod, titanium , hydroxy appetite ( ha ) coated pedicle screw system , hydroxy appetite ( ha ) coated pedicle screw 4.5, 5.5, 6.5, 7.5 mm, titanium , hydroxy appetite ( ha ) coated pedicle screw corresponding rod, titanium , reduction screws with break off plug system for spondyloslithesis , reduction screws with break off plug for spondyloslithesis , titanium , pedicle screws 4.5, 5.5, 6.5, 7.5 mm ( poly axial ) , titanium , fenestrated pedicle screw system , fenestrated pedicle screw for bone cement augmentation size 4.5, 5.5, 6.5, 7.5 mm, titanium , corresponding rod for fenestrated pedicle screw., titanium , corresponding rod for reduction screws with break off plug , titanium , trans formal lumber inter body fusion ( tlif ) peek cage size 26 mm, height 7 15mm , trans formal lumber inter body fusion ( tlif ) peek cage size 28 mm, height 7 – 16 mm , trans formal lumber inter body fusion ( tlif ) inter vertebral rotatable peek cage size 26 mm, height 7 15 mm , trans formal lumber inter body fusion ( tlif ) inter vertebral rotatable peek cage size 28 mm, height 7 15 mm , posterior lumber inter body fusion ( plif ) bullet shaped peek cage height 8 14mm , expandable peek cages with rachet system for cervical spine , expandable peek cages with rachet system for dorsal spine , expandable peek cages with rachet system for lumber spine , inter laminar peek spacer all sizes , inter laminar titanium spacer all sizes , vertebral staple single hole 5.5, 6.5, 7.5 mm dia. , vertebral staple double hole 12, 13, 14, 15 mm dia. , vertebro plasty kit: , kit should have low viscosity bone cement ( 25 gm ) and cement delivery system consists of one pressurizer, syringe, connector , suction cannula, cement mixing bowl and spatula and vertebral body puncture needle 3 mm x100 & 150 mm. , kypho plasty kit with two balloons ( digital ) kit should have digital device to inflate balloon showing pressure in psi & atm., inflatable balloon should bear pressure up to 400 psi. , hart schill spine system , hart schill sizes 100mm, 125mm, 150mm, 200mm, 250mm , sub laminar cable wire , ultrasonic blade system ( please quote rate for ultrasonic blade and irrigation tube only and machine to be provided by company for scalpel use ) , ultrasonic blade for safe spine surgery bone scalpel all size , irrigation tube for bone scalpel ( disposable ) , misc & others , water mattress . , autoclavable eschmarch bandage , 4 , autoclavable eschmarch bandage , 6 , skin marking pen, sterile , elastic nail ( tens ) , ender nails , hand drill , methylene blue marker...

Eastern Railways - Bihar

32812332 supply of procurement of design supply installation and commissio...........procurement of design supply installation and commissio...........,design supply installation and commissioning p10 mm outdoor led full colour display board. size 60 inch (w) x 36 inch (h) x 5 inch (d) with 1 no video processor including cabinet of aluminium frame and acp binding. => limited...

East Central Railway - Bihar

32101527 supply of fibre window glassfibre window glass,fibre window glass thickness 6mm transparent including rubber bidding with aluminium frame size 820mm x 460mm with locking plates mentioned as item no. 9 & item no. 10 in drg. no. emu/4c/asr 5 4 402 alt g...

East Central Railway - Bihar

31402503 supply of fibre window glassfibre window glass,fibre window glass thickness 6mm transparent including rubber bidding with aluminium frame size 820mm x 460mm with locking plates mentioned as item no. 9 & item no. 10 in drg. no. emu/4c/asr 5 4 402 alt g...

Employees State Insurance Corporation - Bihar

31280096 empanelment of supplier for orthopedic implants re e tender for invitation for empanelment of supplier for orthopedic implants for a period of two year , dcp plates 1.5mm ( 2 8 ) holes ss , 1.5 mm cortical screws l 6mm 20mm ss , dcp plates 2.0mm ( 2 8 ) holes ss , 2.0mm cortical screws l 6mm 20mm ss , dcp plates 2.7mm ( 2 12 ) holes ss , 2.7mm cortical screws l 6mm 20mm ss , small dcp plate 3.5mm for fore arm ( 4 10 holes ) ss , 3.5mm cortical screws l 10mm 30mm ss , narrow dcp 4.5mm plate ( 5 14 holes ) ss , 4.5mm cortical screws l 10mm 40mm ss , broad dcp plate 4.5mm ( 6 18 holes ) ss , 4.5mm cortical screws l 20mm 60mm ss , dcp plates 1.5mm ( 2 8 ) holes , titanium , 1.5 mm cortical screws l 6mm 20mm , titanium , dcp plates 2.0mm ( 2 8 ) holes, titanium , 2.0mm cortical screws l 6mm 20mm titanium , dcp plates 2.7mm ( 2 12 ) holes , titanium , 2.7mm cortical screws l 6mm 20mm titanium , small dcp plate 3.5mm for forearm ( 4 14 holes ) , titanium , cortical screw 3.5 mm , l 10 30 mm, titanium , narrow dcp 4.5mm plate ( 5 12 holes ) , titanium , cortical screw 4.5 mm , l 20 60 mm, titanium , broad dcp plate 4.5mm ( 5 14 holes ) , titanium , cortical screw 4.5 mm , l 20 60 mm, titanium , lc dcp 3.5mm, ( 4 12 ) holes , ss , 3.5mm cortical screws l 10mm 30mm ss , narrow lc dcp 4.5mm 4 holes to 16 holes, ss , 4.5mmcortical screws l 10mm 40mm, ss , broad lc dcp 4.5mm 6holes to 18 holes, ss , 4.5mm cortical screws l 20mm 60mm ss , lc dcp 3.5mm, ( 4 12 ) holes , titanium , 3.5mm cortical screws l 10mm 30mm , titanium , narrow lc dcp 4.5mm 4 holes to 16 holes, titanium , 4.5mm cortical screws l 10mm 40mm , titanium , broad lc dcp 4.5mm 6holes to 18 holes, titanium , 4.5mm cortical screws 20mm 60mm l, titanium , lcp 3.5mm, ( 4 12 ) holes, ss , 3.5 mm locking head self tapping screw , l 10mm 30mm , ss , 3.5 mm self tapping cortical screw , l 10mm 30mm , ss , lcp 3.5mm, ( 4 12 ) holes, titanium , 3.5 mm locking head self tapping screw , l 10mm 30mm , titanium , 3.5 mm self tapping cortical screw , l10mm 30mm , titanium , lcp 4.5, narrow, 4 holes to 16 holes , ss , 5 mm locking self tapping screw, l 10mm 40mm , ss , 4.5 mm self tapping cortical screw , l 10mm 40mm , ss , lcp 4.5, narrow, 4 holes to 16 holes , titanium , 5 mm locking screw, l 10mm 40mm , titanium , 4.5 mm self tapping cortical screw , l 10mm 40mm , titanium , lcp 4.5, broad, 6 18 holes , ss , 5 mm locking head self tapping screw , l 20 60 mm , ss , 4.5 mm self tapping cortical screw , l 20 60 mm, ss , lcp 4.5, broad, 6 18 holes , titanium , 5 mm locking head self tapping screw , 20 60 mm l, titanium , 4.5 mm self tapping cortical screw , l 20 60 mm , titanium , lcp 4.5 / 5, broad curved, 12 26 holes left & right for femur, ss , 5 mm locking head self tapping screw , l 20 60 mm , ss , 4.5 mm self tapping cortical screw , l 20 60 mm , ss , lcp 4.5 / 5 , broad curved, 12 26 holes left & right for femur, titanium , 5 mm locking head self tapping screw, l 20 60 mm , titanium , 4.5 mm self tapping cortical screw , l 20 60 mm , titanium , spacer for lcp ( titanium ) 3.5 mm dia , spacer for lcp ( titanium ) 4.5 / 5.0 mm dia , small t plate, right angled for distal radius 3.5mm, ( 3 6 ) holes, ss , cortical screw 3.5 mm , l 8 40 mm, ss , small t plate, oblique angled plate for distal radius, 3.5mm , ( 3 5 ) holes, ss , cortical screw 3.5 mm , l 8 40 mm, ss , distal radius volar medial column locking plate 2.4 mm, ss , distal radius dorsal t locking plate 2.4 mm, ss , distal radius dorsal locking plate 2.4 mm, ss , radial styloid locking plate 2.4 mm, ss , locking screw 1.8 mm, l 18 40 mm, ss , locking screw 2.4 mm , l 8 40 mm, ss , non locking screw 2.4 mm, l 8 40 mm, ss , cortical screw 3.5 mm with head 2.7 mm, l 8 40 mm, ss , lcp t plate 3.5mm, right angled, 3 6holes , for distal radius, titanium , lcp t plate 3.5mm, oblique angled, right / left, 3 6holes , for distal radius, titanium , 3.5 mm self tapping cortical screw, l 6 30 mm, titanium , 3.5 mm locking head screw, l 6 30 mm, titanium , lcp distal radius plate 2.4mm, straight, 5 and 6 holes, for dorsal plating, titanium , lcp distal radius l plate 2.4mm, left and right angled, shaft 3 and4, head 3 holes, for dorsal plating, titanium , lcp distal radius t plate 2.4mm, left and right angled, shaft 3 and4, head 3 holes, for dorsal plating, titanium , lcp distal radius l plate 2.4mm, oblique, left and right angled, shaft 3 and4, head 3 holes, for dorsal plating, titanium , lcp distal radius t plate 2.4mm, oblique, left and right angled, shaft 3 and4, head 3 holes, for dorsal plating, titanium , lcp distal radius plate 2.4mm, left and right , shaft 3 to 5 holes, head 5 holes, for intra articular volar fractures, titanium , lcp distal radius plate 2.4mm, extra articular, left and right , shaft 3 and 5, head 4 and 5 holes, titanium , lcp distal radius plate 2.4mm, extra long, shaft 8 to12 holes, head 4 holes, titanium , cortex screws dia 2.4mm, self tapping, l 14 40mm, titanium , locking screws 2.4 mm self tapping l 6 30mm , titanium , 3.5 mm self tapping cortical screw, l 6 30 mm, titanium , 3.5 mm locking head self tapping screw, l 6 30 mm, titanium , 34a variable angle lcp two column distal radius plate 2.4 mm, 6 7 holes in head and 2 4 holes in shaft, titanium , variable angle lcp volar rim plate 2.4 mm for distal radius with 6 holes in head 5 holes in shaft, titanium. , 2.4mm variable angle locking screws, l 10 30 mm, titanium , 2.4mm self tapping locking screws, l 10 30 mm, titanium , cortical screw 2.7 mm self tapping l 10 30 mm, titanium , locking distal ulna plate with hook , titanium , cortical screw self tapping 2 mm l 8 30 mm, titanium , locking head screw self tapping 2mm l 8 30mm, titanium , strut plates 1.5mm , titanium , t plates 1.5mm , titanium , y plate 1.5 mm, titanium , 1.5 mm cortical screw, titanium , locking t plate 2mm, titanium , locking straight plate 2.0 mm , titanium , locking condylar plate2 .0 mm , titanium , 2 mm locking cortical screw, titanium , locking t plate 2.4 mm, titanium , locking straight plate 2.4 mm , titanium , 2.4 mm cortical screw, titanium , 2.4 mm locking head screw, titanium , calcaneal plate 3.5mm, l 60mm 70mm , ss , 3.5 mm cortical screw , l 10mm 30mm , ss , locking plate for calcanium, titanium , locking screws 2.4 mm, l 10 30 mm, titanium , locking screws 2.7 mm, l 10 30 mm, titanium , locking screws 3.5 mm, l 10 40 mm, titanium , locking x plate for hallex valgus osteotomy, titanium , locking screw 2.7 mm ( head 2.4 mm ) self tapping, 10 30 mm, titanium , quarter tubular plate 2.7 mm ( 4 6 holes ) ss , 2.7 mm cortical screw, l 10 30 mm, ss , 1 / 3rd tubular plate 3.5 mm, ( 2 12 ) holes, ss , 3.5 mm cortical screw, l 10 30 mm, ss , 1 / 3rd tubular locking plate , 3.5 mm, ( 2 12 ) holes, ss , 3.5 mm locking head screw l 6 30 mm, ss , semi tubular plates 4.5mm, 2holes to 12 holes, ss , cortical screw 4.5mm, l 20 60 mm , ss , t buttress plate 4.5mm ( 4 8 ) holes, ss , l buttress plates 4.5mm, 3 8 holes, right / left leg , ss , t buttress plate 4.5mm, 3 12 holes, titanium , l buttress plate 4.5mm, 3 8 holes, right / left leg, titanium , y reconstruction plates 3.5mm , ss , reconstruction plate 3.5 mm ( 5 22 holes ) , ss , reconstruction plate 4.5 mm ( 5 22 holes ) , ss , straight pelvic reconstruction plate 3.5mm ( 5 22 ) holes, ss , lcp reconstruction plate 3.5mm, straight w / combined hole, 5 14holes, titanium , 3.5 mm self tapping cortical screw, l 20 60 mm, titanium , 3.5 mm locking head self tapping screw, l 20 60 mm, titanium , reconstruction plate 3.5 mm low profile, 6 16 holes, curved, ss , reconstruction plate 3.5 mm low profile, 3 20 holes, straight , ss , reconstruction plate 3.5 mm low profile, 10 16 holes, j shaped, ss , pelvic cortex screw 3.5 mm self tapping with head height 2.75 mm , l 40 90, ss , pelvic cortex screw 3.5 mm self tapping with head height 2.75 mm , l 90 150, ss , spring plate, 1 3 holes, length 195 mm, 315 mm, 435 mm, ss , 3.5 mm cortical screw for spring plate, l 20 40mm ss , proximal humeral locking plate 3.5mm, holes ( 4 10 ) , left & right , ss , 3.5 mm cannulated locking screw 20 60 mm, ss , 3.5 mm cannulated non locking screw 20 60 mm, ss , 3.5 mm locking screw 12 60 mm, ss , 3.5 mm cortical screw 12 60 mm, ss , proximal humeral locking plate with multi directional screw placement through same hole , holes ( 4 8 ) , titanium , cancellous screw 4.5 mm, l 20 60 mm, titanium , cannulated cancellous screw 4.5 mm, l 20 60 mm, titanium , multi directional cortical screw 4 mm , l 14 60 mm, titanium , cannulated screw 4 mm , l 14 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , periarticular proximal humerus locking plate 3.5 mm ( 2 6 hole ) left & right, titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , distal humerous locking plate 3.5 mm medial , left & right, 5 8 holes, ss , distal humerous locking plate lateral , left & right, 5 8 holes, ss , cortical screw 2.7 mm, l 10 60 mm, ss , locking head cortical screw 2.7 mm, l 10 60 mm, ss , 3.5mm cortical screws with head 2.7 mm, l 20 40 mm, ss , 3.5mm cortical screws with locking head 2.7 mm, l 20 40 mm, ss , lcp distal humerus plate 2.7 / 3.5mm dorsolateral with and without support for lateral condyle right or left, holes ( 3 14 ) , titanium , lcp distal humerus plate 2.7 / 3.5mm medial, right or left, holes ( 3 14 ) , titanium , locking screw 2.7 mm ( head 2.4 ) self tapping , l 14 60 mm, titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , locking distal humerus extra articular plate, 6 10 combi holes, ss , locking head screw 3.5 mm, l 10 60 mm, ss , cortical self tapping screw 3.5 mm, l 10 60 mm, ss , lcp distal humerus extra articular plate, 6 10 combi holes, titanium , locking head screw self tapping 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , distal medial femoral locking plate , 4.5 / 5 mm left / right, ( 6 18 holes ) , ss , locking head screw self tapping 5 mm, l 20 80 mm, ss , cancellous self tapping screw 5 mm, l 20 70 mm, ss , distal medial femoral locking plate , 4.5 / 5 mm left / right, ( 6 18 holes ) , titanium , locking head screw self tapping 5 mm, l 20 80 mm, titanium , cancellous self tapping screw 5 mm, l 20 70 mm, titanium , distal lateral femoral locking plate , 4.5 / 5 mm left / right, ( 6 18 holes ) , ss , locking head screw self tapping 5 mm, l 20 80 mm, ss , cortical self tapping screw 4.5 mm, l 20 70 mm, ss , lcp for lateral distal femur 4.5mm, 5 to 13 holes, right and left, titanium , locking head screw self tapping 5 mm, l 20 80 mm, titanium , cortical self tapping screw 4.5 mm, l 20 70 mm, titanium , 68a proximal lateral tibial locking plate 4.5 / 5 mm, left / right ( 4 14 holes ) , ss , cannulated locking screw 5.5 mm, l 20 80 mm, ss , cancellous screw 5.5 mm, l 20 70 mm, ss , cortical screw 4.5 mm self tapping, l 20 70 mm, ss , proximal lateral tibial locking plate 4.5 / 5 mm, left / right ( 4 14 holes ) , titanium , locking head screw self tapping 5 mm, l 20 80 mm, titanium , cancellous screw 6.5 mm, l 20 70 mm, titanium , cortical screw 4.5 mm self tapping, l 20 70 mm, titanium , lcp medial proximal tibial plate 3.5mm right / left shaft, 4 20mm holes, titanium , lcp lateral proximal tibia plate , 3.5mm , 4 16mm holes, right / left, titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , distal medial tibia locking plate 3.5 mm , left & right ( 5 21 holes ) , ss , locking head screw 3.5 mm, l 10 60 mm, ss , cortical self tapping screw 3.5 mm, l 10 60 mm, ss , cancellous locking screw 4 mm, ss. , lcp anterolateral distal tibia plate 3.5mm, right or left, holes ( 5 21 ) , titanium , lcp distal medial tibia plate 3.5mm medial 4 14mm holes right / left, titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , distal lateral fibular locking plate ( 4 10 holes ) titanium , locking head screw 3.5 mm, l 10 30 mm, titanium , cortical self tapping screw 3.5 mm, l 10 30 mm, titanium , metaphyseal plate 3.5mm , titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , metaphyseal plate 4.5 / 3.5 mm for metaphyseal fractures. titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , locking head screw self tapping 5 mm, l 20 80 mm, titanium , cortical self tapping screw 4.5 mm, l 20 70 mm, titanium , angled blade plates 130 ° blade for femoral angular osteotomy, l ( 50mm 95mm ) 4 9 holes, ss , 90° osteotomy plate 4 holes, ss , condylar blade plate 95°, 5 18 holes, ss , osteotomy plate medial high tibia, 3 and 4 holes, right and left, titanium , lcp for pediatric proximal femur varus osteotomy 3.5 and 5 mm , ss , lcp for pediatric proximal femur valgus osteotomy 3.5 and 5 mm, ss , lcp for pediatric distal femur osteotomy and fractures 3.5 and 5 mm , ss , locking head screw 3.5 mm, l 10 60 mm, ss , cortical self tapping screw 3.5 mm, l 10 60 mm, ss , locking head screw self tapping 5 mm, l 20 80 mm, ss , cortical self tapping screw 4.5 mm, l 20 70 mm, ss , figure of eight ( 8 ) plate for epiphysiodesis, with two corresponding screws , ss , figure of eight ( 8 ) locking plate for epiphysiodesis with two corresponding screws , titanium , clavicle locking plate 3.5 mm, ss , locking head screw 3.5 mm, l 10 40 mm, ss , cortical self tapping screw 3.5 mm, l 10 40 mm, ss , clavicle locking plate 3.5 mm, titanium , locking head screw 3.5 mm, l 10 40 mm, titanium , cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , clavicle hook plate 3.5mm right / left 6 holes, hook l 15 to 18mm, ss , cortical screw 3.5 mm, l 10 40 mm, ss , lcp clavicular hook plate 3.5mm right and left ( 4 8 ) holes , hook 12 18mm, titanium , locking head screw 3.5 mm, l 10 40 mm, titanium , cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , variable angle locking clavicle anterior plate 3.5 mm, titanium , 3.5 mm locking variable angle screws, l 16 30mm , titanium , cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , lc lcp wrist fusion plate2.4 / 3.5, standard bend, titanium , locking head screw 2.4 mm, l 10 40 mm, titanium , cortical self tapping screw 2.4 mm, l 10 40 mm, titanium , locking head screw self tapping 3.5 mm, l 10 40 mm, titanium , cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , lc lcp wrist fusion plate2.4 / 3.5, standard bend, titanium , locking head screw 2.4 mm, l 10 40 mm, titanium , cortical self tapping screw 2.4 mm, l 10 40 mm, titanium , lcp olecranon plate 3.5mm , left / right, holes ( 2 12 ) , titanium , locking head screw self tapping 3.5 mm, l 10 40 mm, titanium , cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , lcp olecranon hook plate 3.5 mm, 2 10 holes, titanium , locking head screw self tapping 3.5 mm, l 10 40 mm, titanium , cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , proximal ulnar locking plate 3.5 mm, 3 9 holes, ss , locking head screw self tapping 3.5 mm, l 10 40 mm, ss , cortical self tapping screw 3.5 mm, l 10 40 mm, ss , dhs plate 130°, 135°, 150° , barrel length 38mm ( 4 10 ) holes, ss , dhs plate 135°, barrel length 25mm ( 4 6 ) holes, ss , dhs / dcs lag screw 12.5 / 8.0mm, l 50mm 115mm, ss , dhs / dcs compression screw 4.0mm, l 36mm, ss , cortical screw 4.5 mm, l 20 70 mm, ss , dhs trochanter stabilizing plate , ss , lcp dhs plate 130°, 135°, 150° , barrel length 38mm, 2 6 holes, titanium , lcp dhs plate 135°, barrel length 25mm ( 4 6 ) holes, titanium , lcp dhs / dcs screw 12.5 / 8.0mm, l 50mm 115mm, titanium , helical blade for lc dhs , 12.5 dia, l 65 115 mm, titanium , dhs / dcs compression screw 4.0mm, l 36mm, titanium , locking device for lag dhs, 35 mm, titanium , locking cortical screw 5 mm , l 20 60 mm, titanium , self tapping cortical screw 4.5 mm , l 20 60 mm, titanium , cable plates 6 10 hole, for peri prosthetic fractures, ss , cable assembly with cerclage dia. 1.8 mm, ss , cable for plate dia . 1.8 mm, ss , cable needle assembly, dia. 1.3 mm , cortical bone screw 4.5 mm for use with cable plate , hex button 3.5 mm for use with 4.5 & 6.5 mm screw, ss , cable pin ( 2 in no. ) 1.3 mm , l 35 65 mm. , cable pin crimpar assembly , locking attachment plate for peri prosthetic fractures 4 & 8 hole, 3.5 mm, titanium , locking head screw self tapping 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , connecting screw, 5 mm , l 10 40 mm , trochanteric fixation plate with option of multiple screw & screw cerclage wire, various sizes, titanium. , cortical screw 3.5 mm, l 10 50 mm, titanium. , cortical screw 4.5 mm, l 14 60 mm, titanium. , cancellous screw 4 mm short thread, l 20 60 mm, titanium. , cancellous screw 4 mm full thread, l 20 60 mm, titanium. , cerclage cable co cr. , reconstruction femoral nail 9.0mm to 12mm dia, right / left, l ( 340 440 ) mm, titanium , hip screw 6.5mm, l ( 75 110 ) mm, titanium , end cap, cannulated , l 0mm 15mm, titanium , locking bolt , self tapping, l 26 mm 68mm for recon nail, titanium , washer 12.0 / 6.5mm dia., 2.5mm thick, titanium , proximal femoral nail 9 mm 13 mm dia. long, right / left, l ( 200mm 380mm ) , titanium , , femoral neck screw 11.0mm dia, l 80mm 115mm, titanium , hip screw 6.5mm , l 70mm 105mm, titanium , locking bolt , self tapping, l 26 mm 68mm for proximal femur nail, titanium , proximal femoral nail with anti rotation for short stature and osteoporotic bones 9.0 12mm, l 170mm 420mm, right / left, titanium , helical blade for proximal femoral nail , l 75mm to 120mm, titanium , end cap for proximal femoral nail, l 0 15mm extension , locking bolt , self tapping, l 26 mm 68mm for proximal femur nail, titanium , antigrade proximal femoral nail with one proximal hole should have a locking option from greater trochanter to lesser trochanter. dia 8 16 mm length 240 500mm, ss , end cap for antigrade femoral nail 12.0mm, extension 0mm 15mm, ss , proximal locking screw , ss , distal locking screw , ss , antigrade femoral nail with one proximal hole should have a locking option from greater trochanter to lesser trochanter. dia 8 16 mm length 240 500mm, titanium , end cap for antigrade femoral nail 12.0mm, extension 0mm 15mm, titanium , proximal locking screw , titanium , distal locking screw , titanium , cannulated interlocking femoral nail , dia. 9mm 13mm , l 340 440mm, ss , inter locking bolt, ss , end cap, ss , unreamed solid femoral nail , 9.0 10 mm dia., l 280mm 480mm, titanium. , inter locking bolt, titanium. , end cap, titanium. , cannulated interlocking femoral nail 09.0mm 13.0mm dia., l 280mm 480mm, titanium. , end cap , titanium , locking bolts , titanium , supra condylar femoral fracture nail 9.0mm dia., l 160mm 340mm, solid, titanium , supra condylar femoral fracture nail 9 mm to12mm dia., cannulated, l 200mm 380mm, titanium , distal locking screw , titanium , spiral blade l ( 60mm 80mm ) , titanium , proximal locking screw 6 mm, self tapping, titanium , end cap for nail using locking screw and spiral blades, titanium , retrograde femoral nail dia 9 14 mm, l 140 480 mm, ss , distal locking bolt , ss , proximal locking bolt , ss , end cap for retrograde nail, ss , femur expandable nail initial dia 8.5mm expandable upto 13.5mm, len 32cm to 46cm ( increment 2cm ) for antegrade / rotrograde insertion with or without proximal locking , kuntcher clover leaf i / m nail 6mm 14mmdia., length 20cms to 48cms ( 1cm increment ) , unreamed solid tibial nail 8.0mm 9.0mm dia.l 285mm 380mm, titanium , end caps for tibial nails, titanium , locking bolt , titanium , cannulated interlocking tibial nail 8 11 mm dia.l 300mm 400mm, titanium , end caps for tibial nails, titanium , locking bolt , self tapping, titanium , cannulated interlocking tibial nail 8mm 12mm l 200mm to 400mm, ss , end caps , ss , locking bolt , ss , multi directional tibial nail, dia 8mm 10mm, l 285 405mm for all fractures of tibia , titanium , locking screw 4.0mm and 5.0mm, l 18 60mm, for multi directional nails, titanium , cancellous bone locking screw 5.0mm with dual core, self tapping, l 30 50mm, titanium , end cap for multi directional tibial nail, extension 0 15mm, titanium , tibial expandable nail initial dia 8.5mm for length 30 38 cms expanded upto 13.5mm for antegrade insertion with or without proximal locking. , unreamed humeral nail , various sizes, titanium , spiral blade for unreamed humeral nail, titanium , locking bolts , self tapping, l 16mm 48mm for humerus nailing, titanium , proximal humeral naii various sizes, titanium , spiral blade for phn, titanium , locking bolts , self tapping, titanium , end caps with 0mm 15mm extension, titanium , humerus inter locking nail various sizes , ss , locking bolt, ss , end cap, ss , humerus inter locking nail various sizes , titanium , locking bolt, titanium , end cap, titanium , square nail for radius and ulna 1.5 , 2.0 , 2.5 mm dia., 17cms to 30 cms length ( 1cm increment ) , square nail for radius and ulna 3mm, 3.5mm dia., 17cms to 30 cms length ( 1cm increment ) , elastic nail 2.0, 2.5, 3 mm dia. , l 440mm, titanium , elastic nail 3.5 4.0 mm dia. , l 440mm, titanium , ender nail, dia 6 12 mm, various length, ss , injectable bone substitutes 100% nano crystal hydroxy apetite ( ha ) bone paste , 1 ml. , injectable bone substitutes 100% nano crystal hydroxy apetite ( ha ) bone paste , 2 ml. , injectable bone substitutes 100% nano crystal hydroxy apetite ( ha ) bone paste , 5 ml. , injectable bone substitutes, b tricalcium phosphate and hylonorate solution with needle10g and 12g for injectable bone substitute, 10cc , b tri calcium phosphate granules 1.4 2.8mm / porosity 60% bone substitutes, 5.0g , b tri calcium phosphate granules 1.4 2.8mm / porosity 60% bone substitutes, 10.0g , b tri calcium phosphate granules 1.4 2.8mm / porosity 60% bone substitutes, 20.0g , b tri calcium phosphate cylinder, 10.5mm dia, l 25mm bone substitutes , b tri calcium phosphate wedge, angle 14 , 25x20mm bone substitutes , b tri calcium phosphate wedge, angle 28 , 25x20mm bone substitutes , b tri calcium phosphate wedge, angle 22 , 25x20mm bone substitutes , b tri calcium phosphate wedge, angle 26 , 25x20mm bone substitutes , b tri calcium phosphate wedge, half round, 7° angle , for tibial osteotomy bone substitutes , b tri calcium phosphate wedge, half round, 10° angle , for tibial osteotomy bone substitutes , b tri calcium phosphate wedge, half round, 13° angle , for tibial osteotomy bone substitutes , cerclage wire with eye , dia. 1mm, 1.25mm, 1.5 mm l 280 to 600mm, ss , cerclage wire tightener . , wire mount for lcp 4.5 / 5.0 mm, titanium , s.s. wires: 16 , 18 , 20 , 22 , 24 gauge.146 , giggli wire , giggli wire handle , steinman pins dia., 3mm, 3.5mm., 4mm, x 150, 175, 200, 225 mm length, ss , steinman pins dia., 4.5mm, 5mm x 150, 175, 200, 225 mm length, ss , denham pins dia., 3mm, 3.5mm., 4mm, x 150, 175, 200, 225 mm length, ss , denham pins dia., 4.5mm, 5mm x 150, 175, 200, 225 mm length, ss , k wire, dia. 0.6mm, l 70mm, ss , k wire, dia. 0.8 mm l 150mm, ss , k wire with trocar tip , dia. 1.4mm, 1.6mm, 1.8mm, 2.0mm, l 150mm , ss , k wire with trocar tip , dia. 2.5mm, 3.0 mm , l 150mm , ss , k wire with trocar tip dia. 1.4mm, 1.6 mm, 1.8mm, 2.0mm , l 280mm, ss , k wire with trocar tip dia. 2.5mm, 3.0 mm , l 280mm, ss , k wire double tip, dia. 1.4mm, 1.6mm, 1.8mm, 2.0mm, l 150 300 mm, ss , k wire double tip, dia. 2.5mm, 3.0 mm l 150 300mm, ss , k wire with threaded tip, dia. 1.25mm, 1.6mm, 2.5mm l 150mm, ss , guide wire with spade point dia.1.5mm, 1.6mm, 2.0mm l 150 to300mm, ss , guide wire with trocar tip dia.1.25mm, 2.0mm l 200 to 230mm, ss , guide wire graduated ( threaded ) 1.25 mm dia. , ss , cortical screws 1mm dia, length 2mm to 20mm ( 2mm increments ) ss , cortical screws 1.5mm dia, length 2mm to 20mm ( 2mm increments ) ss , cortical screws 2mm dia, length 2mm to 20mm ( 2mm increments ) ss , cortical screws 2.5mm dia, length 2mm to 20mm ( 2mm increments ) ss , cortical screws 2.7 mm dia, length 6mm to 20 mm ( 2mm increments ) ss , cortical screws 2.7 mm dia, length 22 mm to 40 mm ( 2mm increments ) ss , cortical screws 3.5 mm dia, length 10mm to 40 mm ( 2mm increments ) ss , cortical screws 3.5 mm dia, length 45mm to 80 mm ( 5mm increments ) ss , cortical screws 3.5 mm dia, length 10mm to 40 mm ( 2mm increments ) , titanium , cortical screws 3.5 mm dia, length 45mm to 80 mm ( 5mm increments ) , titanium , cortical screws 4.5 mm dia, length ( 10mm to 40 mm ) ( 2mm increments ) , ss , cortical screws 4.5 mm dia, length ( 42mm to 80 mm ) ( 2mm increments ) , ss , cortical screws 4.5 mm dia, ( 10mm to 40 mm ) ( 2mm increments ) , titanium , cortical screws 4.5 mm dia, ( 42mm to 80 mm ) ( 2mm increments ) , titanium , cortical screws self tapping, 1 mm dia, length 2mm to 20 mm ( 2mm increments ) ss , cortical screws self tapping, 1.5 mm dia, length 2mm to 20 mm ( 2mm increments ) ss , cortical screws self tapping, 2 mm dia , length 2mm to 20 mm ( 2mm increments ) ss , cortex screws dia 2.4mm, self tapping, l14 40mm, ss , cortical screws self tapping, 2.5 mm dia, length 2mm to 20 mm ( 2mm increments ) ss , cortical screws self tapping, 2.7 mm dia, length 6mm to 30 mm ( 2mm increments ) ss , cortical screws self tapping, 3.5 mm dia, length 10mm to 40 mm ( 2mm increments ) ss , cortical screws self tapping, 3.5 mm dia, length 45mm to 85 mm ( 5mm increments ) ss , cortical screws self tapping, 4.5 mm dia, ( 10mm to 40 mm ) ss , cortical screws self tapping, 4.5 mm dia, short threaded ( 42mm to 80 mm ) ss , cortical screws self tapping, 4.5 mm dia, short threaded ( 82mm to 140 mm ) ss , cortical screw 1mm l ( 6 14 ) mm, self tapping, titanium , cortical screw 1.3mm l ( 6 18 ) mm, self tapping, titanium , cortical screw 1.5mm l ( 6 24 ) mm, self tapping, titanium , cortical screw 2.0mm l ( 6 38 ) mm, self tapping, titanium , cortical screw 2.4mm l ( 6 40 ) mm, self tapping, titanium , cortical screw 2.7mm l ( 6 40 ) mm, self tapping, titanium , cortical screw 3.5mm length 10 30mm self tapping ( titanium ) , cortical screw 3.5mm length 32 60mm self tapping ( titanium ) , cortical screw 4.5mm length 10 40mm self tapping ( titanium ) , cortical screw 4.5mm length 42 80mm self tapping ( titanium ) , cancellous screws self tapping fully threaded, 3.5 mm dia, length 10mm to 30mm ( 2mm increments ) ss , cancellous screw self tapping fully threaded, 3.5mm dia, length 35mm to 60mm ( 5mm increment ) ss , cancellous screw self tapping fully threaded, 3.5mm dia, length 65mm to 105mm ( 5mm increment ) ss , cancellous screws self tapping fully threaded , 3.5 mm dia, length 10mm to 30mm ( 2mm increments ) titanium , cancellous screw self tapping fully threaded, 3.5mm dia, length 35mm to 60mm ( 5mm increment ) titanium , cancellous screw self tapping fully threaded, 3.5mm dia, length 65mm to 105mm ( 5mm increment ) titanium , cancellous bone screws 4.0mm, fully threaded l ( 10mm 60mm ) with 2mm increment, ss , cancellous bone screws 4.0mm , partially threaded l ( 10mm 58mm ) with 2mm increment, ss , cancellous bone screws 4.0mm , partially threaded l ( 60mm 90mm ) , ss , cancellous screws 4.0 mm dia ( partially threaded ) length 10mm to 30mm ( 2mm increments ) titanium , cancellous screws 4.0 mm dia ( partially threaded ) length 35mm to 60mm ( 5mm increments ) titanium , cancellous bone screw 4.0mm , fully threaded, l ( 10mm 60mm ) , titanium , cancellous screws 6.5mm dia 16mm thread length 25mm to 70mm ( 5mm increments ) ss , cancellous screws 6.5mm dia 16mm thread length 75mm to 110mm ( 5mm increments ) ss , cancellous screws 6.5mm dia 32mm thread length 25mm to 70mm ( 5mm increments ) ss , cancellous screws 6.5mm dia 32mm thread length 75mm to 110mm ( 5mm increments ) ss , cancellous bone screws 6.5mm, fully threaded, l ( 20mm 110mm ) with 5mm increments, ss , cancellous screws 6.5mm dia 16mm threaded length 25mm to 70mm ( 5mm increments ) titanium , cancellous screws 6.5mm dia 16mm threaded length 75mm to 110mm ( 5mm increments ) titanium , cancellous screws 6.5mm dia 32mm partially threaded length 30mm to 70mm ( 5mm increments ) titanium , cancellous screws 6.5mm dia 32mm partially threaded length 75mm to 120mm ( 5mm increments ) titanium , cancellous screws 6.5mm , fully threaded length 45mm to 150mm ( 5mm increments ) titanium , malleolar screw 4.5mm l ( 25mm 70mm ) with 5mm increment, ss , malleolar screws 4.5 mm dia, length 25mm to 80mm ( 5mm increments ) , titanium , cannulated cancellous screws 3.5 mm self drilling short thread, l 10mm 30mm ( 2mm increments ) ss , cannulated cancellous screws 3.5 mm self drilling full thread, l 10mm 30mm ( 2mm increments ) ss , cannulated cancellous screws 3.5 mm self drilling short thread, l 10mm 30mm ( 2mm increments ) titanium , cannulated cancellous screws 3.5 mm self drilling full thread, l 10mm 30mm ( 2mm increments ) titanium , cannulated cancellous screws 4 mm dia short thread 20mm 60mm ( 2mm increments ) ss , cannulated cancellous screws 4 mm dia fully threaded 20mm 60mm ( 2mm increments ) ss , cannulated cancellous screws 4 mm dia short thread 20mm 60mm ( 2mm increments ) titanium , cannulated cancellous screws 4 mm dia fully threaded 20mm 60mm ( 2mm increments ) titanium , cannulated screw 4.5 mm short thread 20 to 60mm ( 2mm increments ) ss , cannulated screw 4.5 mm fully threaded 20 to 60mm ( 2mm increments ) ss , cannulated screw 4.5 mm short thread 20 to 60mm ( 2mm increments ) titanium , cannulated screw 4.5 mm fully threaded 20 to 60mm ( 2mm increments ) titanium , cannulated screw 6.5 mm short thread 30 to 60mm ( 5mm increments ) ss , cannulated screw 6.5 mm short thread 65 to 130mm ( 5mm increments ) ss , cannulated screw 6.5 mm fully threaded 30 to 60mm ( 5mm increments ) ss , cannulated screw 6.5 mm fully threaded 65 to 130mm ( 5mm increments ) ss , cannulated screw 6.5 mm short thread 30 to 60mm ( 5mm increments ) titanium , cannulated screw 6.5 mm short thread 65 to 130mm ( 5mm increments ) titanium , cannulated screw 6.5 mm fully threaded 30 to 60mm ( 5mm increments ) titanium , cannulated screw 6.5 mm fully threaded 65 to 130mm ( 5mm increments ) titanium , large cannulated cancellous screws 7.0 mm dia, 16mm thread length 50mm to 120mm ( 5mm increament ) ss , large cannulated cancellous screws 7.0 mm dia 32mm thread length 50mm to 120mm ( 5mm increment ) ss , large cannulated cancellous screws 7.0 mm dia, 16mm thread length 50mm to 120mm ( 5mm increament ) titanium. , large cannulated cancellous screws 7.0 mm dia 32mm thread length 50mm to 120mm ( 5mm increment ) titanium , locking screw dia 2.7mm ( head 2.4 ) , self tapping l 14mm to 60mm , ss , locking screw dia 2.7mm ( head 3.5 ) , self tapping l 20 mm to 60mm , ss , locking head screw 3.5mm, self tapping l ( 10mm 24mm ) ( 2mm increment ) , ss , locking head screw 3.5mm, self tapping l ( 26mm 48mm ) ( 2mm increment ) , ss , locking head screw 4.5mm self tapping size 16 85mm ss , locking head screw 5.0 mm, l 10 48 mm ( 2mm increment ) ss , locking head screw 5.0 mm , l 50 85 mm ( 2mm increment ) ss , locking head cancellous screw 5.0 mm , l 50 85 mm ( 2mm increment ) ss , locking cancellous screw 6.5 mm, l 20 100 mm ss , locking head screws 2.0mm self tapping l6 30mm titanium , locking head screws 2.4 mm self tapping l6 30mm titanium , locking screw dia 2.7mm ( head 2.4 ) , self tapping l 14mm to 60mm , titanium , locking screw dia 2.7mm ( head 3.5 ) , self tapping l 20 mm to 60mm , titanium , locking head screw 3.5mm, self tapping l ( 10mm 24mm ) ( 2mm increment ) , titanium , locking head screw 3.5mm, self tapping l ( 26mm 48mm ) ( 2mm increment ) , titanium , locking head screw 4.5mm self tapping size 16 85mm ( titanium ) , locking head screw 5.0 mm l 10 48 mm ( 2mm increment ) titanium , locking head screw 5.0 mm l 10 48 mm ( 2mm increment ) , titanium , locking head screw 5.0 mm l 50 85 mm ( 5mm increment ) , titanium , locking head cancellous screw 5.0 mm l 50 85 mm ( 5mm increment ) , titanium , cannulated locking head screw 5 mm, l 25 75 mm, ss , cannulated locking head screw 5 mm, l 80 120 mm, ss , cannulated locking head screw 5 mm, l 25 75 mm, titanium , cannulated locking head screw 5 mm, l 80 120 mm, titanium , locking cancellous screw 6.5 mm, l 20 60 mm, titanium , locking cancellous screw 6.5 mm, l 65 100 mm , titanium , headless compression screws 2.4mm, self drilling, cannulated, length 9 30mm, titanium. , headless compression screws 3 mm, self drilling, cannulated, length 10 40mm, titanium. , headless compression screws short threaded 4.5 mm, selfdrilling, cannulated, length 20 60mm ( increment of 2 mm ) , titanium. , headless compression screws long threaded 4.5 mm, self drilling, cannulated, length 20 60mm ( increment of 2 mm ) , titanium. , headless compression screws short threaded 4.5 mm, self drilling, cannulated, length 65 80mm ( increment of 5 mm ) , titanium. , headless compression screws long threaded 4.5 mm, self drilling, cannulated, length 65 80mm ( increment of 5 mm ) , titanium. , headless compression screws short threaded 6.5 mm, self drilling, cannulated, length 20 60mm ( increment of 2 mm ) , titanium. , headless compression screws long threaded 6.5 mm, self drilling, cannulated, length 20 60mm ( increment of 2 mm ) , titanium. , headless compression screws short threaded 6.5 mm, self drilling, cannulated, length 65 100mm ( increment of 5 mm ) , titanium. , headless compression screws long threaded 6.5 mm, self drilling, cannulated, length 65 100mm ( increment of 5 mm ) , titanium. , shaft screw 3.5 mm , l 12 60 mm, ss , shaft screw 4.5 mm , l 22 80 mm, ss , washer for 4.0 mm cancellous screws, ss , washer for 4.5 mm malleolar screws, ss , washer for 6.5 mm cancellous screws, ss , spiked washer for cancellous bone screw 6.5mm dia 13.5mm x 6mm, ss , spiked washer for 4.0mm cancellous screw, ss , washer 10 mm dia., titanium , washer, 13.0 mm dia., titanium , hemispherical washer for 6.5 mm screws, ss , washer holding clip , drill bit ( stainless steel ) , 1.0 mm , drill bit ( stainless steel ) , 1.5 mm , drill bit ( stainless steel ) , 2mm, l 85 mm , 2 flute , drill bit ( stainless steel ) with quick coupling end, 2.5mm, l 100 mm , drill bit 2.5mm with quick coupling end, titanium. , drill bit ( stainless steel ) 2.7mm , 2 flute with quick coupling end , drill bit ( stainless steel ) 2.7mm 3 flute with quick coupling end , drill bit ( stainless steel ) 3.2mm , 2 flute with quick coupling end , drill bit ( stainless steel ) 3.2mm , 3 flute with quick coupling end , drill bit ( stainless steel ) 3.5mm with quick coupling end , drill bit ( stainless steel ) 4.5mm with quick coupling end , drill bit ( stainless steel ) 3.5mm extra long , 2.8mm graduated drill bit for locking compression plate, ss , cannulated drill bit 2.5 mm dia, ss , cannulated drill bit 2.7 mm dia, ss , cannulated drill bit 3.2 mm dia, ss , cannulated drill bit 3.5 mm dia, ss , cannulated drill bit 4.5 mm dia, ss , cannulated drill bit 5.0 mm dia, ss , bone tap with t handle 1.5mm , bone tap with t handle 2.0mm , bone tap with t handle 2.7mm , bone tap with t handle 3.5mm , bone tap with t handle 4.5mm , bone tap with t handle 6.5mm , cannulated bone tap 2.5 mm dia , cannulated bone tap 3.5 mm dia , cannulated bone tap 4.5 mm dia , cannulated bone tap 6.5 mm dia , cannulated bone tap 7.0 mm dia , quick coupling handle. , quick coupling bone tap, 3.5 mm. , quick coupling bone tap, 4.5 mm. , screw driver non canulated 2.0mm, hexagonal , screw driver non canulated 2.7mm, hexagonal , screw driver non canulated 3.5mm, hexagonal , screw driver non canulated 4.5mm, hexagonal , screw driver canulated 3.5mm, hexagonal , screw driver canulated 4.5mm, hexagonal , screw driver canulated 7.0mm, hexagonal , screw driver star shaped 3.5 mm , screw driver star shaped 4.5 mm , torque limiting screw driver for 3.5mm locking head screw , torque limiting screw driver for 4.5 / 5.0mm locking head screw , quick coupling handle with quick coupling screw driver shaft , 3.5 mm , quick coupling handle with quick coupling screw driver shaft , 4.5 mm , u type staple 3mm dia 10mm 35mm length ( at 5 mm increments ) , coventary staple 5mm, 10mm, 15mm step , bone cement with low viscosity 20g. , bone cement with medium viscosity 20g. , bone cement with high viscosity 20g. , bone cement with low viscosity 40g. , bone cement with medium viscosity 40g. , bone cement with high viscosity 40g. , bone cement with gentamycin, low viscosity 20g. , bone cement with gentamycin, medium viscosity 20g. , bone cement with gentamycin, high viscosity 20g. , bone cement with gentamycin, low viscosity 40g. , bone cement with gentamycin, medium viscosity 40g. , bone cement with gentamycin, high viscosity 40g. , bone cement with gentamycin+clindamycin, 40g. , bone cement with gentamycin+vancomycin, 40g. , bone cement with tobramycin, 40g. , bone cement mixing bawl with spatula, ss , disposable cement gun. , re usable cement gun with accessories ( autoclavable ) . , only accessories for cement gun. , re usable cement gun with vacuum mixing ( autoclavable ) . , accessories for vacuum mixing cement gun. , vacuum pump. , gentamycin cement beads 3 to 5 mm dia. ( 10 beads ) , gentamycin cement beads 3 to 5 mm dia. ( 30 beads ) , gentamycin cement beads 7 to 9 mm dia. ( 10 beads ) , gentamycin cement beads 7 to 9 mm dia. ( 30 beads ) , a m prosthesis 37 mm to 57 mm with 2 mm increment , fixed bipolar head with fenestrated femoral stem small / medium / large, ss , bipolar hip prosthesis ( talwarkar type ) 37mm to 57mm with 2mm increment , bipolar hip prosthesis ( modular type ) cobalt chrome cup & head various sizes with various neck length , bipolar hip prosthesis ( modular type ) femoral stem various sizes, cemented , cement restrictor , stem centralizer , non cemented bipolar hip prosthesis ( modular type ) cup & head various sizes with various neck length. , non cemented bipolar hip prosthesis ( modular type ) ha coated femoral stem various sizes. , non cemented bipolar hip prosthesis ( modular type ) cup & head various sizes with various size neck length. , non cemented bipolar hip prosthesis ( modular type ) porous coated femoral stem various sizes. , total hip acetabular cups various sizes , total hip metal head dia 22, 26, 28mm with various neck length , femoral stem various sizes. , stem centralizer , cement restrictor , modular stem ( stainless steel ) small, medium, large , double tappered, highly polished, collar less, self centering, variable offsets. , modular internal head 22, 26, 28 mm ( stainless steel ) with various neck length. , modular thr 10 degree acetabular cup with lpw: , stem centralizer , cement restrictor , cementless hip system fully ha coated titanium alloy femoral stem with various sizes. , cementless hip system metal head 28 mm with variable neck length. , cementless hip system acetabular cup cementless poro coated with option of screws. , cementless hip system acetabular highly crosslink poly cup liner with 10 degree lpw different sizes. , bone screw to fix the cup. , cementless hip system porous coated titanium alloy femoral stem with various sizes. , cementless hip system metal head 28 mm with variable neck length. , cementless hip system acetabular cup cementless poro coated with option of screws. , cementless hip system acetabular highly crosslink poly cup liner with 10 degree lpw different sizes. , bone screw to fix the cup. , cementless hip system proximal ha coated titanium alloy femoral stem ( double tappered ) various sizes. , cementless hip system metal head 28 mm with variable neck length. , cementless hip system acetabular cup cementless ha coated with option of screws. , cementless hip system acetabular highly crosslink poly cup liner with 10 degree lpw different sizes. , bone screw to fix the cup. , cementless hip system ha / poro coated femoral stem, various sizes. , cementless hip system metal head 32, 36 mm with variable neck length. , cementless hip system acetabular cup ha / poro coated with option of screws, should accomodate 32, 36 mm head with same cup. , cementless hip system acetabular highly crosslink polycup liner with 10 degree lpw different sizes, should accommodate 32, 36 head. , bone screw to fix the cup. , cementless hip system ha / poro coated femoral stem, different sizes. , cementless hip system ceramic head ( bilox delta ) 32, 36 mm with variable neck length. , cementless hip system acetabular cup ha / poro coated with option of screws, should accommodate 32, 36 mm head with same cup. , cementless hip system acetabular highly crosslink poly cup liner with 10 degree lpw different sizes, should accommodate 32, 36 head. , bone screw to fix the cup. , cementless hip system ha / poro coated femoral stem, different sizes. , cementless hip system ceramic head ( bilox delta ) 32, 36 mm with variable neck length. , cementless hip system acetabular cup ha / poro coated with option of screws, should accomodate 32, 36 mm head with same cup. , cementless hip system acetabular ceramic liner, should accommodate 32, 36 head. , bone screw to fix the cup. , primary femoral stem: non cemented primary femoral tapered short, rounded tipped short stem made of titanium alloy porocoated with layer of ha allowing preservation of femoral neck. , non cemented acetabular cup: non cemented hemispherical acetabular cup made of titanium alloy with peripheral anti rotation fins with inbuilt ceramic liner made of zirconia & alumina, with different diameters. , ceramic femoral head for cup: ceramic femoral head with various sizes. , femoral adaptor sleeve: femoral adaptor sleeve made of titanium alloy with clean taper fit and compatible with the inner ceramic taper of the femoral head with different sizes , uncemented femoral stem : uncemented primary femoral tapered blade style stem made of titanium alloy with poro coating with high friction titanium coating. with anterior & posterior longitudinal flute, should be proximal femoral bone preserving. , bilox delta ceramic head 32, 36 mm with variable neck length. , uncemented hip system acetabular cup ha / poro coated with option of screws, should accomodate 32, 36 mm head with same cup. , uncemented hip system acetabular highly crosslink poly cup liner with 10 degree lpw , various sizes, should accommodate 32, 36 head. , bone screw to fix the cup. , un cemented hip system ha / poro coated femoral stem, various sizes. , bilox delta ceramic head 32, 36 mm with variable neck length. , un cemented trabecular metal cup different sizes accommodate large head with screw option. , uncemented hip system acetabular highly crosslink polycup liner with 10 degree lpw , various sizes, should accommodate 32, 36 head. , bone screw to fix the cup. , uncemented femoral stem, proximal sleeve, femoral head femoral head: 36 mm ceremic head of alumina & zerconia with different neck length. stem: noncemented proximal loading option titanium alloy, tapered with coronal slot & distal flutes , variable neck length diameter & offset. sleeve: porocoated proximal femoral sleeve with locking mechanism with femoral stem , various sizes. , noncemented titanium acetabular cup with gription poro coating with locking mechanism for liner, various sizes with screw locking option. , highly crosslink poly cup liner with 10 degree lpw different sizes, should accommodate 32, 36 head. , bone screw to fix the cup. , cemented long stem, various sizes & offsets. , acetabular cup with lpw. , large diameter head 32, 36 , stem centralizer , cement restrictor , revision uncemented acetabular cup : multi hole titanium alloy actebular shells with a full 180 degree hemisphere poro coated with option of multiple screw holes for fixation with options to fit all liners ( metal, ceramic & poly ) of various sizes . , revision acetabular screw: 5.5 titanium alloy acetabular revision screws for peripheral area of cup in various sizes. , 6.5 mm titanium self tapping cancellous screw for use in central area of the cup. , uncemented hip system acetabular highly crosslink poly cup liner with 10 degree lpw , various sizes, should accommodate 32, 36 head. , ceramic femoral head for cup: ceramic femoral head made of alumina & zirconia with various sizes. , distally interlocked femoral reconstruction revision hip system ha coated distal locking option with various diameter & length with the provision of reconstruction of trochanter & cerclage cable hole. , distal interlocked screw titanium distal locking self tapping various sizes. , acetabular reconstruction system acetabular reconstruction titanium ring with ha coated acetabular shell with option of multiple central & peripheral screws with corresponding screws ( 8 screws ) . , posteriorly lipped highly cross linked poly liner various sizes. , bilox delta ceramic femoral head for cup, various sizes. , femoral revision system distally fixed revision femoral stem, porous coated, with calcar replacement options different diameter. , acetabular mesh, ss , acetabular mesh, titanium , femoral mesh, titanium , acetabular cage, various sizes, titanium , uni condylar mobile knee system consisting of femoral components, tibial inserts & tibial tray of various sizes. , femoral component , co cr, various sizes , tibial component, titanium alloy, various sizes , tibial insert, various sizes , patellar button, various sizes , total condylar, pcl substituting , fixed bearing / mobile bearing with the provision of high flex knee system consist of following components: femoral component, tibial component, tibial insert. , cruciate retaining high flexion knee system consist of following components: femoral component, titanium tibial tray , highly cross linked poly insert . , posterior stabilized fixed bearing femoral components with ability to attach extender stems. , highly cross linked poly insert with locking mechanism, with option of both cruciate substituting and retaining various sizes. , co cr tibial tray with ability to attach extension stem, various sizes. , patella along with three pegs. , patient specific total knee prosthesis ( us fda approved ) : consists of femoral & tibial component, tibial insert. the tkr design should be patients own ct or mri based , the mechanical based alignment to be matched with patients own mechanical axis, the cutting block must provide patients own reference for distal femoral & proximal tibial cut, it should have robust design and should have faster turn around time ( less than 4 weeks ) . , semi constraint total knee prosthesis: femoral component with the ability to accept any kind of metal augments & offset extension stem. , femoral metal augment for distal & posterior femur various sizes , femoral extension stem various offset & sizes , tibial component with ability to accept various sizes tibial augmentation blocks, wedges & extension stem. , semi constraint tibial knee inserts all sizes , metal tibial wages step, hemi & full of various sizes and thickness , tibial extension stem various offset & sizes , semi constraint total knee prosthesis: femoral component with the ability to accept any kind of poro coated metaphyseal sleeves & offset extension stem. , metaphyseal porocoated femoral sleeves, various sizes. , femoral extension stem various offset & sizes , semi constraint mobile bearing tibial knee inserts all sizes , tibial component mobile bearing tray with ability to accept various sizes porocoated metaphyseal sleeves & extension stem. , metaphyseal porocoated tibial sleeves, various sizes. , tibial extension stem various offset & sizes , cable wire with sleeves, ss , sleeve for cable wire ss , cable wire with sleeves, co cr , sleeve for cable wire co cr , neer prosthesis fixed shoulder various sizes. , hemi shoulder stem, co cr . , hemi shoulder humeral head , total shoulder humeral stem with holes in fins for muscle and soft tissue reconstruction cemented / uncemented. , humeral head. , glenoid prosthesis cross linked poly. , cemented humeral stem with 0 10 degree retroversion, co cr. , non cemented humeral stem with 0 10 degree retroversion, co cr. , high mobility humeral polythelene cup. , glenoid implant with fixation screws. , locking / non locking fixation screws. , pulse lavage wound debridement system ( disposable battery operated with concurrent suction and fan spray tip ) , antibiotic spacers for hip joint ( high resistance bone cement body loaded with antibiotic ) , all sizes. , antibiotic spacers for knee joint , all sizes , elbow prosthesis total elbow implant with accessories i ) humeral component various sizes ulna component various sizes , single pin clamp , double pin clamp , open double pin clamp , twin adjustable clamp straight , twin adjustable clamp curved , transverse clamp , connecting clamp , single pin clamp with extension plate , double pin clamp with extension plate. , connecting rod 5.0 mm , spanner 11 mm , t wrench 11 mm , box spanner 11mm , triple tocar set with handle , tubular rod 4 , tubular rod 6 , tubular rod 8 , tubular rod10 , tubular rod 12 , tubular rod 14 , tubular rod 16 , tubular rod 18 , tubular rod 20 , tube to tube clamp , threaded schanz pins ( self tapping ) dia. 3.5 mm, shaft 4 mm , short threadedl 125mm. , threaded schanz pins ( self tapping ) 4.0 mm, short threaded, l 100 200 mm , threaded schanz pins ( self tapping ) 4.0 mm long threaded, l 100 200 mm , threaded schanz pins ( self tapping ) 4.5 mm short threaded, l 100 200 mm , threaded schanz pins ( self tapping ) 4.5 mm long threaded, l 100 200 mm , threaded schanz pins ( self tapping ) 5.0 mm short threaded, l 100 200 mm , threaded schanz pins ( self tapping ) 5.0 mm long threaded, l 100 200 mm , cancellous front threaded 5 mm schanz pins, thread l 16mm, l 100 200 mm. , cancellous front threaded 5mm schanz pins, thread l 32 mm, l 100 200 mm. , cancellous front threaded 5mm schanz pins , thread l 50 mm, l 100 200 mm . , threaded schanz pins 2.0 mm . , threaded schanz pins 2.5 mm . , threaded schanz pins 3.0 mm . , threaded schanz pins 3.5 mm. , small single pin clamp 4.0 x 2.5 mm for 2 & 2.5 mm schanz pins. , small single pin clamp 4.0 x 4.0 mm for 3.5 mm schanz pins. , small connecting clamp 4.0 x 4.0 mm , connecting rods 4.0 mm dia length 100 to 300mm ( 50mm increment ) , open small single pin clamp 4.0 x 2.5 mm , open small connecting clamp 4.0 x 4.0 mm , small compression distraction device size: 60mm, 75mm, 100mm, 150mm , spanner 8 mm , t wrench 8 mm , ball & socket type distractor set with 360 degree rotation compatible with 2.5 mm & 3.5 mm schanz screw. ( rate to be quoted for one set consist of ball & socket distractor assembly with two 2.5 mm & two 3.5 mm schanz screw ) , k wire with threaded tip, 1.25 mm, l 100 mm , k wire with threaded tip, 1.60 mm, l 100 mm , schanz pin 2.5 mm , various sizes , connecting rod 3 mm , various sizes , universal clamps for 1.25 mm & 1.60 mm wire , connecting clamps , dc assembly , femoral distractor set. , rail rod, l 200 400 mm , central clamp , swivel clamp , end clamp , schanz pin 6 mm, tappered 4.5 mm to 3.5 mm. , schanz pin 6 mm, tappered 6 mm to 5 mm. , schanz pin 6 mm, tappered 4.5 mm to 3.5 mm with hydroxy apetite ( ha ) coating for threads. , schanz pin 6 mm, tappered 6 mm to 5 mm with hydroxy apetite ( ha ) coating for threads. , rail rod, l 150 250 mm , central clamp , swivel clamp , end clamp , schanz pin 4 mm, tappered 3.5 mm to 3 mm. , schanz pin 6 mm , tappered 4.5 mm to 3.5 mm with hydroxy apetite ( ha ) coating for threads. , ctev set small ( components ) link joint 30, connecting rods ( 2.5mm ) st. 4 3, 6 2, 8 2, z rods 2, l rods large 2, small 2, distractor 4mm 4 2, 6 2, foot plate 1, k wires 2mm 6 2, 1.6mm 6 6, allen keys , ctev set medium ( components ) link joints 30, connecting rods ( 3.0mm ) st. 5 3, 6 2, 10 2, z rods 2, l rods ( large ) 2, small 2, distractor 4mm 4 2, , 6 2, foot plate 1, k wires ( 2.0mm ) 5 3, 6 2, allen keys , ctev set large ( components ) clamps aescualp type 4x2.5 9, 4x4 12, connecting rods 6 5, 12 2, distractors 4mm 6 2, d.c.rods 2, foot plate 1, k wires 2.5mm5 5, 2.0mm 6 6, allen keys , spring jess fixator set for ctev. , ilizarov half rings ( the holes should match with the stainless steel ring ) sizes 110, 120, 130, 140, 150, 160, 180, 200, 220 mm , carbon fiber frame , ilizarov half rings ( the holes should match with the carbon ring ) sizes 110, 120, 130, 140, 150, 160, 180, 200, 220 mm, ss , ilizarov fixator set 5 / 8 ring ( sizes 110, 120, 130, 140, 150, 160, 180, 200 mm ) , ss , ilizarov cannulated bolt. , ilizarov connection bolt. , ilizarov slotted bolt. , ilizarov nuts. , ilizarov bushing. , ilizarov telescopic rods 100mm , ilizarov telescopic rods 150 mm , ilizarov telescopic rods 200 mm , ilizarov telescopic rods 250mm , ilizarov telescopic rods 300 mm , ilizarov telescopic rods 350 mm , ilizarov graduated telescopic rods 60mm, , ilizarov graduated telescopic rods 100 mm , ilizarov graduated telescopic rods 150 mm , ilizarov graduated telescopic rods 200mm, , ilizarov graduated telescopic rods 250 mm , ilizarov threaded rods 100mm 200mm ( 50 mm increments ) up to 400mm , ilizarov male post , ilizarov female post , ilizarov male hinge , ilizarov female hinge , ilizarov male hinge, low profile , ilizarov female hinge, low profile , ilizarov hinges 90 degree standard , ilizarov hinges 90 degree low profile , ilizarov spacing washers , 1.5 mm , ilizarov spacing washers , 2 mm , ilizarov split locking washers , 2 mm , ilizarov slotted washers , 4 mm , ilizarov flat sided washers, 2mm , ilizarov flat sided washers , 4 mm , ilizarov conical couple washer , ilizarov oval washer , nylon washer , nylon insert nut. , ilizarov italian arch , ilizarov threaded socket & buckles. , ilizarov short connection plate , ilizarov curved connection plate , ilizarov wire fixation nuts + bolts central hole , ilizarov wire fixation nuts + bolts side hole , ilizarov square nut , ilizarov threaded rod 60, 80, 100, 120, 150 mm. , ilizarov threaded rod 200, 250, 300, 350, 400 mm , ilizarov slotted threaded rod 60, 80, 100 mm. , ilizarov oblique support connection. , ilizarov rotational & transational device. , ilizarov twisted plate , ilizarov multiple pin fixation clamp. , ilizarov single schanz pin fixation bolt , wires for ilizarov bayonet tip, cortical 1.5x ( 300 400mm ) , wires for ilizarov bayonet tip, cortical 1.8x ( 300 400mm ) , wires for ilizarov trocar tip 1.5x ( 300 400mm ) , wires for ilizarov trocar tip 1.8x ( 300 400mm ) , stopper wires for ilizarov ( olive wires ) one piece, 1.5x ( 300 400mm ) , stopper wires for ilizarov ( olive wires ) one piece, 1.8x ( 300 400mm ) , wrench shoes small, medium, large , spanner for ilizarov fixator, 10 mm , t wrench for ilizarov fixator , box spanner , universal hinge , wrencho cubes , wire tensioner dynamic , wire fixation buckle , negative suction drainage set ( disposable ) 10fg to 18fg sizes single tube , negative suction drainage set ( disposable ) 10fg to 18fg sizes double tube sterile disposable drapes ( all drapes should be single use with well packed in peel off pouche with inbuilt ethylene oxide ( e.o ) indicator having shelf life not less than 3 years, product should have isi / iso certified ) & should have sterilization certificate from sterilizing source. , sterile u draps with adhesive strip ( double layer disposable ) , 200 x 240 cm medical fabric not less than 60 gsm , sterile u draps with adhesive strip ( double layer disposable ) , 160 x 200 cm medical fabric not less than 60 gsm , sterile knee o drape with adhesive strip ( reinforced impermeable 3 layer fabric ) , 200x320 cm , sterile elbow drape with adhesive strip ( reinforced impermeable 3 layer fabric ) , 150 x 250 cm , sterile knee drape with adhesive strip ( reinforced impermeable 3 layer fabric ) with absorbent centre sheet size 75x100 cm & total size 120 x 160 cm. , sterile hip u drape with adhesive strip ( reinforced impermeable 3 layer fabric ) with absorbent centre sheet size 100x150 cm & total size200 x 300 cm. , sterile hip u drape with adhesive strip ( reinforced impermeable 3 layer fabric ) with absorbent centre sheet size 100x150 cm & attached leg pouch, total size 200 x 240 cm, medical grade sms ( sms=spun +melt bloun+spun ) fabric. , sterile spinal drape ( reinforced impermeable 3 layer fabric ) with adhesive strip on central aperture , 8x12 cm, with absorbent centre sheet size 100x150 cm , total size 150x300 cm. , sterile knee arthroscopy drape ( reinforced impermeable 3 layer fabric ) size: 200x300cm with fluid collection pouch. , sterile disposable wrapping drape ( ldpe ) , 15 x 100 cm , sterile disposable wrapping drape ( ldpe ) , 30 x 150 cm , sterile cling film roll, 12x100 cm. , face mask with anti fog shield ( 4 ply ) . , sterile disposable legging ( pair packing ) with fluid repellant fabric. , sterile c arm cover ( pair ) . , screen cover ( transparent ) with adhesive strip, 160x200 cm , mackintosh sheet, autoclavable, size 1 x 2 meter ( rubber ) . , disposable sterile water proof sheets ( double packed ) , 150x200 cm. , incise drape 20x30 cm , incise drape 30x30 cm , incise drape 30x45 cm , incise drape 40x45 cm , incise drape 45x60 cm , povidone iodine impregnated incise drape 20x ( 20 30 ) cm , povidone iodine impregnated incise drape 25x ( 30 40 ) cm , povidone iodine impregnated incise drape 30x ( 45 55 ) cm , povidone iodine impregnated incise drape 35x ( 55 65 ) cm , povidone iodine impregnated incise drape 40x60 cm , trolley cover , size 125x150cm , trolley cover, size 150x200 cm , camera cover ( pre sterile disposable ) with 2 tying string. , cable cover ( pre sterile ) , stockinette ( disposable ) , 2x 5 meter ( cotton ) . , stockinette ( disposable ) , 3x 5 meter ( cotton ) . , stockinette ( disposable ) , 4x 5 meter ( cotton ) . , stockinette ( disposable ) , 5x 5 meter ( cotton ) . , stockinette ( disposable ) , 6x 5 meter ( cotton ) . , arm sling pouch should be made up of soft quality fabric, should have non stretching strap, adjustable, closure with velcro plastic buckles, s / m / l , arm sling pouch should be made up of soft quality fabric, should have non stretching strap, adjustable, closure with velcro plastic buckles, xl , ankle wrap, 3 elastic band with valcro closure, s / m / l , ankle wrap, 3 elastic band with valcro closure, extra large , ankle brace should be made up of foam fused fabric, should have semi rigid plastic splints on both side of brace, velcro closure and plastic buckles for locking, sizes s / m / l. , ankle brace should be made up of foam fused fabric, should have semi rigid plastic splints on both side of brace, velcro closure and plastic buckles for locking, sizes xl. , tennis elbow band ( high strength foam padded strap ) , s / m / l , tennis elbow band ( high strength foam padded strap ) , extra large , wrist binder with thumb support. , shoulder immobilizer s / m / l , shoulder immobilizer, extra large , cot finger splint ( u shaped to keep finger in straight position ) , s / m / l , frog splint ( four leg construction allow self closing for immobilization of dip joint in extension & pip joint in flexion ) , s / m / l , spoon splint ( to keep finger tip in extension ) , s / m / l , protector splint for finger tip injury ( + mark design to protect finger tip from all around ) , s / m / l , base ball splint for distal phalanx injury ( finger tip fold over design ) , s / m / l , mallet finger splint ( splint to keep dip joint in 10 degree hyper extension ) , s / m / l , finger extension splint ( spring wire construction for keeping finger in extension ) , s / m / l , finger flexion splint ( spring wire construction for keeping finger in flexion ) , s / m / l , thumb spica splint , knuckle bender splint , carpel tunnel splint day time , carpel tunnel splint night time , arm sling strap heavy duty strap with two way buckle system. , wrist & fore arm splint ( right & left ) , static wrist cock up splint ( right & left ) , s / m / l , dynamic wrist cock up splint ( right & left ) . , foot drop splint, s / m / l , foot drop splint, xl , boot and de rotation bar splint , compression stockings ( latex free ) with moderate compression option above knee, s / m / l , compression stockings ( latex free ) with moderate compression option below knee, s / m / l , resistance band for stage 1 to stage 6 ( for resistance rehabilitation exercise ) , various thickness. , bolster , s / m / l. , triangular pillow for abduction of hip. , silicon heel cushion ( right & left ) , s / m / l , silicon insole, s / m / l , silicon arch pad, s / m / l , silicon metatarsal pad, s / m / l , silicon toe spacer , cast shoe, s / m / l , cast shoe, xl , kramer wire splint :width 7.5 cm, l 100 cms , kramer wire splint :width 10 cm, l 100 cms , thomas splint ( well padded thigh ring ) , small , thomas splint ( well padded thigh ring ) , medium , thomas splint ( well padded thigh ring ) , large , bohler brown splint , small , bohler brown splint, medium , bohler brown splint, large , bohlers stirrup, small , bohlers stirrup , medium , bohlers stirrup , large , screws for bohler stirrup , walker fixed type , walker adjustable & foldable ( coated aluminum frame work with comfortable hand grips. , auxiliary crutches ( adjustable height ) , aluminum , elbow crutches ( adjustable height ) , aluminum , walking stick, aluminum mono pod with handle grip and rubber tip. , walking stick, aluminum tri pod with handle grip and rubber tip. , walking stick, aluminum tetra pod with handle grip and rubber tip. , wheel chair ( foldable ) mag wheel, seat width 16 / 18, weight capacity > 99 kg, fixed arm rest, 8 solid caster, 24 solid rear wheel, double crossed bar. , wheel chair ( foldable ) with commode mag wheel, seat width 16 / 18, weight capacity > 99 kg, fixed arm rest, 8 solid caster, 24 solid rear wheel, double crossed bar. , wheel chair mag wheel, seat width 16 / 18, weight capacity > 99 kg, fixed arm rest, 8 solid caster, 24 solid rear wheel. , wheel chair with commode mag wheel, seat width 16 / 18, weight capacity > 99 kg, fixed arm rest, 8 solid caster, 24 solid rear wheel. , lumbar traction kit with rod ( all sizes ) , cervical traction kit with rod ( all sizes ) soft foam padding , pelvic traction kit with rod. , b / k skin traction kit with velcro strap. , leg traction kit with pully. , buck pulley. , plastic pulley single. , balkan frame with accessories compatible with hospital beds. , paraffin wax, 1kg , paraffin wax, 5kg , gymnasium ball, 75 cm , physiotherapy clay, 1 kg , weight cuff, 1 / 2 kg . , weight cuff , 1 kg , weight cuff , 2 kg , weight cuff, 3 kg , bone marrow aspiration system , bone biopsy needle ( jamshidi ) , bone currate small , bone currate medium , bone currate large , bone nibbler small , bone nibbler medium , bone nibbler large , bone nibbler double action straight small , bone nibbler double action straight medium , bone nibbler double action straight large , bone nibbler double action curved small , bone nibbler double action curved medium , bone nibbler double action curved large , hammer small ( 250 gm ) , hammer medium ( 500 gm ) , hammer large ( 750 gm ) , bone cutter medium , bone cutter large , self retaining retractor without hinges, small , self retaining retractor without hinges, medium , self retaining retractor without hinges, large , self retaining retractor with hinges , small , self retaining retractor with hinges , medium , self retaining retractor with hinges , large , acl / pcl reconstruction set consist of a to i. , tibial tunnel guide system for acl reconstruction ( should have locking system with variable angle adjustment form 35 to 60 degree ) , cannulated flower tip drill bit with laser marking for calculation of bone tunnel length for acl reconstruction. size 5, 6, 7, 8, 9, 10, 11 mm , femoral off set guide for 4, 5, 6, 7 , 8 mm. , drill tip graft passing pin 2.4 mm. , drilling wire 2.4 mm. , graft preparation board. , tendon stripper, 7 mm dia., close ended , thickness tester , bio screw driver. , acl repair implants : stainless steel cannulated interference screws dia 7 10 mm l 20, 25, 30mm , acl repair implants : titanium cannulated interference screws dia 7 10 mm l 20, 25, 30mm , acl repair implants : titanium with rounded thread soft cannulated interference screws dia 7 10 mm l 20, 25, 30mm , acl repair implant : bio absorbable interference screw size 7 11mm, l 20 30mm , acl repair implant : tibial bio absorbable interference screw with proximal slop to flush fix in anterior tibial cortex size 7 11mm, l 20 30mm , acl repair implant : bio composite interference screw size 7 11mm, l 20 30mm , acl femoral fixation sheath with screw for tendon graft fixation, various sizes , acl tibial fixation sheath with screw for tendon graft fixation, various sizes , acl femoral fixation device ( metal pin ) , 15mm cortical length, l 40mm , acl femoral fixation device ( bio absorbable pin , various sizes ) , button for lateral cortical femoral fixation , button along with loop for acl reconstruction, various sizes , acl suture button with flexible loop for lateral femoral fixation, various sizes. , acl suture button with continuous loop for lateral femoral fixation, various sizes. , acl reconstruction button along with loop & preloaded with passing suture , l 15 35 mm , ligament staple in dia 8 11 mm , suture post ( flat head screw ) sizes 4.5x ( 25 50 ) mm , titanium , meniscal repair system of meniscal tear ( disposable ) , meniscal needle with continuous fiber wire needle , drainage / irrigation needle for knee arthroscopy. , shoulder cannula disposable . , shoulder cannula reusable. , 1.9 mm anchore with #2 suture with handle , titanium , 2.7 mm anchore with #2 suture with handle , titanium , 2.8 mm anchore with #2 suture with handle, titanium , 3 mm anchore with #2 suture with handle , titanium , 3.5 mm anchore with #2 suture with handle , titanium , 5 mm suture anchore with #2 polyester suture , titanium , 5.5 mm fully threaded anchor #2 suture , titanium , 3 mm knotted bio absorbable anchor , 2.3 mm knot less bio absorbable anchor , 2.9 mm knot less bio absorbable anchor , 2.3 mm knot less peek anchor , 2.9 mm knot less peek anchor , 3.5 mm knot less bio absorbable anchor , 3.5 mm knot less peek anchor , 5.5 mm bio absorbable anchor with thread , all peek anchor for double & single row cuff repair. dia 4.5, 5.5 & 6.5 mm , suture passer 45 degree left and right , suture passer 90 degree left and right , suture shuttle needle. , uhmw # 2 number white / coloured suture with needles , uhmw # 2 number stripped colour suture with needles , acromio clavicular joint dislocation repair system having button on one side & suture disc on other side , connected with suture wire , normal saline 3 litre pack , radio frequency ablation probe ( different angle ) for arthroscopy, disposable ( please quote rate for one radio frequency ablation probe only and machine / generator to be provided by company for ablation probe use for surgery ) , cervical disc replacement system metal on poly. , cervical disc prosthesis metal on metal with anterior translation. , anterior cervical inter body fusion peek cage size , height 5 12 mm , anterior cervical peek inter body fusion spacer and plate with integrated double screws for each vertebra, 5 12 mm , anterior cervical peek inter body fusion spacer and plate with integrated single screw for each vertebra, 5 12 mm , low profile cervical locking fixation plate with 4 self drilling & self locking screw single level. , low profile cervical locking fixation plate with 6 self locking screw double level. , anterior mesh cage for cervical spine, titanium , variable angle anterior cervical plate with self drilling screw and inbuilt locking screw, single level with 4 screw , variable angle anterior cervical plate with self drilling screw and inbuilt locking screw, double level with 6 screw , variable angle anterior cervical plate with self drilling screw and inbuilt locking screw, three level with 8 screw , posterior cervical system lateral mass screw 3.5 mm , various length, titanium , posterior cervical system lateral mass rod, titanium , pedical screw for cervical spine 3.5 mm, various length, titanium , pedical screw rod for cervical spine, titanium , occipito cervical fixation rod plate system, small, titanium , occipito cervical fixation rod plate system, medium , titanium , occipito cervical fixation rod plate system, large, titanium , trans articular odontoid cannulated screw all sizes, titanium , pedicle screws 4.5, 5.5, 6.5, 7.5 mm ( mono axial ) , titanium , pedicle screws 4.5, 5.5, 6.5, 7.5 mm ( poly axial ) , titanium , pedical screw rod, titanium , transverse connector, titanium , pedicle hook, titanium , sub laminar hook, titanium , facet hook, titanium , percutaneus cannulated pedicle screw 4.5, 5.5, 6.5, 7.5 mm , titanium , percutaneus cannulated pedicle screws corresponding rod , titanium , pedical screw with break off plug , size 4.5, 5.5, 6.5, 7.5 dia length 20 70 mm , titanium , pedical screw with break off plug corresponding rod, titanium , hydroxy appetite ( ha ) coated pedicle screw 4.5, 5.5, 6.5, 7.5 mm, titanium , hydroxy appetite ( ha ) coated pedicle screw corresponding rod, titanium , reduction screws with break off plug for spondyloslithesis , titanium , pedicle screws 4.5, 5.5, 6.5, 7.5 mm ( poly axial ) , titanium , fenestrated pedicle screw for bone cement augmentation size 4.5, 5.5, 6.5, 7.5 mm, titanium , corresponding rod for fenestrated pedicle screw., titanium , corresponding rod for reduction screws with break off plug , titanium , trans formal lumber inter body fusion ( tlif ) peek cage size 26 mm, height 7 15mm , trans formal lumber inter body fusion ( tlif ) peek cage size 28 mm, height 7 – 16 mm , trans formal lumber inter body fusion ( tlif ) inter vertebral rotatable peek cage size 26 mm, height 7 15 mm , trans formal lumber inter body fusion ( tlif ) inter vertebral rotatable peek cage size 28 mm, height 7 15 mm , posterior lumber inter body fusion ( plif ) bullet shaped peek cage height 8 14mm , expandable peek cages with rachet system for cervical spine , expandable peek cages with rachet system for dorsal spine , expandable peek cages with rachet system for lumber spine , inter laminar peek spacer all sizes , inter laminar titanium spacer all sizes , vertebral staple single hole 5.5, 6.5, 7.5 mm dia. , vertebral staple double hole 12, 13, 14, 15 mm dia. , vertebro plasty kit: , kit should have low viscosity bone cement ( 25 gm ) and cement delivery system consists of one pressurizer, syringe, connector , suction cannula, cement mixing bowl and spatula and vertebral body puncture needle 3 mm x100 & 150 mm. , kypho plasty kit with two balloons ( digital ) kit should have digital device to inflate balloon showing pressure in psi & atm., inflatable balloon should bear pressure up to 400 psi. , hart schill sizes 100mm, 125mm, 150mm, 200mm, 250mm , sub laminar cable wire , ultrasonic blade for safe spine surgery bone scalpel all size , irrigation tube for bone scalpel ( disposable ) , autoclavable eschmarch bandage , 4 , autoclavable eschmarch bandage , 6 , skin marking pen, sterile , elastic nail ( tens ) , ender nails , hand drill , methylene blue marker...

Building Construction Department - Bihar

31163433 estimate of furniture for new govt. engineering . college, khagaria 1 office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side one drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock. 2 2 seater sofa overall size 1130w x 700d x 785 h cm, seat height 43.5 cm side frame assembly: the side frame assembly is fitted to the two ends of the connecting beam assembly to form, the leg cum armrest assembly. it is made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick ms e.r.w. tube and powder coated ( dft 40 60 microns ). the ends are fitted with abs moulded end caps, 3. seatrest assembly:the seat rest assembly consists of a fabricated inner frame assembly insitu moulded high resilience (hr) polyurethane foam having density = 45 +/ 2 kg/m3 with hardness load 25 ± 2 kgf as per is:7888 for 25% compression of the foam. the complete moulded seat rest assembly is covered with a replaceable fabric upholstery cover *seat size: 52.0cm. (w) x 50.0cm. (d) x 6.0cm. (t), 4. backrest assembly:the backrest assembly is flexing type and consists of a fabricated inner frame assembly insitu moulded with high resilience (hr) polyurethane foam having density = 45 +1 2 kg/m3 with hardness load 14 ± 2 kgf as per is:7888 for 25% compression of the foam. the complete moulded backrest assembly is covered with a replaceable fabric upholstery cover. *back size: 52.0cm. (w) x 59.0cm. (h) x 6.0cm. (t), 5. adj. glides: the adj glide is injection moulded in black nylon & fitted to the front end of side frame assembly along with abs moulded adj. glide base to take care or unleveled floor surface 3 3 seater sofa the side frame assembly made of 38mm dia 2mm thick is fitted to the two ends of the connecting beam assembly to form the leg cum armrest assembly. it is made of a ms. e.r.w. tube duly powder coated. the ends are fitted with abs moulded end caps. tie member: it is the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members are used to connect the side frames. the tie member is made of ms. e.r.w. tube 40mmx40mm 2mm thick duly powder coated. the seat/back assemblies are mounted on the tie member. l bracket of 6mm thick steel connects the back to the tie member assembly. seat foam is of 45 +/ 5 kg/m3 and back foam is of 32 +/ 5 kg/m3 with hardness of 25+/ 2 on hampden m/c. at 25% compression of the foam. seat size 52cm widex50cm deep and back size 52 cm wide and 60cm high. back of the sofa flexes for additional comfort 1 seater –601mmwx700mmdx 810mmh, 3 seater –1640w x 700d x 785 h cm 4 3 seater steel chair cross beammade of ms erw rectangular black powder coated tube of 80 x 40 x 2 mm leg & arm rest chrome plated made of cold rolled steel. arm rest & leg assembled to the cross beam with m10 x 100 mm bolts. seat & back 1.6mm thick powdercoated perforated shell of cold rolled ms sheet. side bar of chrome plated solid steel 30 x 12 mm (din 174) with flunting & plastic insert .the shell is assembled on the cross beam with help of m8 bolts the overall dimension is 1608mm (l) x 695mm (h) x 555mm (d), seat height : 405mm 5 work bench of size 4’ x 3’, angle 1.5 x 1.5 with 2 pair of legs with work top with overall dimensions. 1200mm l x 900mm d x 950mm h, the worktop of mdf ext garde is12406 wood. max udl 1500kgs the worktop should be made of various layers of beech wood which are planed, glued and pressed together. this should make the work top non deformable, and load and wear resistant. this shall be covered with 4mm steel sheet. leg: the bench leg should be powder coated should be 80mm l x 1265mm d x 960mm h. back bracing for stability 6 centre table of size 1200w x 600d x 378h built with the extremely durable rubberwood, the table can hold weight up to 25kgs. with a very suitable cappuccino color, the table will complement any style of décor. the tapered legs provide stable support. it’s free of flaws design can accommodate your books, magazines, laptop and coffee mugs, all at once. the well thought out dimensions of the table make it easier to position it anywhere in the house 7 work bench of size 8’ x 4’ with 2 pair of legs with work top with overall dimensions. 2400mm l x 1200mm d x 950mm h, the worktop of mdf ext garde is12406 wood. max udl 1500kgs made of various layers of beech wood which are planed, glued and pressed together. this should make the work top non deformable, and load and wear resistant. bench leg: the bench leg should be powder coated should be 80mm l x 1265mm d x 960mm h. back bracing for stability 8 executive chair with cushioned seat is made of injection molded plastic outer & inner. plastic inner is upholstered with stitched cover and moulded high resilience polyurethane foam of density 4542 kg/m*,and hardness load 16 + 2 kgf as per 15:7888 for 25% compression.the stitched cover is made from spacer fabric and leatherette seat size : 47.0 cm. (w) x 48.0 cm. (d), tunular frame : the powder coated (dft 40 60 micron) tubular frame is cantilever type & made of 02.5440.03 cm x 0.240.016 cm thk ms erw tube.the back connected to frame through powder coated (dft 40 60 micron) high pressure die cast connector. 9 office chair with seat and back are made from seasoned wood and plywood. the same is upholstered with black synthetic leather and polyurethane foam. back size 46.0cm(w)x27.0cm(h). seat size 46.0cm(w)x40.0cm(h). the armrest is gas assisted injection moulded from black polypropylene. the understructure assembly is a cantilever type frame.width of the chair 58cm, depth 56.5cm,height 87.5cm,seat height 48cm. 10 office chair : the seat and back are made up of 1.2 ±0.1cm. thick hot pressed plywood measured as per qa method described in ocp qlta p14 18 and upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam is designed with contoured lumbar support for extra comfort. back size 49.0 cm. (w) x 47.0 cm. (h) , seat size 49.0 cm. (w) x 44.0 cm. (id) high resilience (hr) polyurethane foam: the hr polyurethane foam is moulded with density = 45 ±2 kg/m3 and hardness load 16 ± 2 kgf as per is:7888 for 25% compression. 11 principal chair: the seat is made up of 1.4± 0.1 chick hot press 4 plywood upholstered with fabric and moulded polyurethane foam. it has a seat depth adjustment of 5.0±0.3 cm integrated in the seat through a sliding mechanism. seat size: 50.0cm (w)x 49.0cm(d).the back is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustable lumbar support made of injection moulded polypropylene having an adjustment of 6.0±0.1cm.backsize: 50.0cm(w) x68.0 cm(h).the polyurethane foam for seat is of density 55± 5kg/m3. it is made of glass filled polyamide arm structure with pu arm top and height adjustment of 7.0 ±0.5cm.the arm top has swivel and to for movements. to for movement is 6.0± 0.5cm.the inner tube of armrest is chrome plated. the mechanism is designed with the following features:• 360° revolving type.• centre tilt synchro• 3 position (including upright lock) giving option of variable tilt angle to the chair with anti shock feature. the headrest is injection moulded din glass filled polypropylene which is upholstered with foam and fabric has an adjustment of 6.0± 0.1cm & its assembled over the full back chair. the pneumatic height adjustment is chrome plated with an adjustment stroke of 9.0 ± 0.3cm.the pedestal is high pressure die cast polished aluminum and fitted with 5 nos. twin wheel castors. the pedestal is 65.0±0.5 cm p.c.d. the twin wheel castors are injection moulded in black glass filled polyamide having 6.0±0.1cm wheel diameter. the chrome plated tubular frame is made of día2.8±0.03cm x0.2±0.02 cm the m.s. round tube. the frame is fitted with plastic caps made of injection moulded glass filled polypropylene. 75(w)* 75(d)* 115 130(h)* 44.5 53.5(sh). 12 computer chair with seat and back are made uo injection moulded high impact strenght polypropylene polymer compound with indoor graade uv resistance.the tubular weled frame is made from dia2.22 +/ 0.03cmx 0.12+/ 0.0128 cm and 3.5+/ 0.03 cm x 0.12+/ 0.0128 am stainless steel 202 grade tube.the tube are buff polished to give shiny finish. cm. the shoes are made of high impact strenght polypropylene polymer. compond with indoor grad uv resistance and pressed fitted with tubularfram. size : (w)52.5cm*(d)55.8cm*(h)84.5cm*(seat h) 45.0 cmseat size 52.5cm(w)*53.2 cm(d) back size 51.6 cm(w)*40.5 cm (h). 13 office chair mid back pneumatic height adjustment cushioned revolving chair made up of 1.2cm thick hot pressed ply wood seat & back upholstered with fabric with moulded polyurethane foam together with moulded abs seat & back integral skin polyurethane with reinforced with m.s. insert. the tilt mechanism adjustment upright locking, 360 degree revolving type fitted with 05 nos. twin wheel castor dia 5 cm. 14 compactor on 12 feet rail length moves on rails. the cabinet body rigid knock down construction made of 0.8 thick crca steel eonforming to is: 513 gld. body units are bolted to undercarriage. optimizer height from ground is 2081] mm (1930 hody+ 65 under 35 channel systems] finish: — the bodies inciuding shelves are given anti rust surface treatment 8‘ are powder coated with epoxy polyester powder oven backed with a controlled temperature of 130 deg. to 200 deg. c.sheif:l made of 0.8 thick crca steel conforming to is;513 gd. max load bearing capacin is fit! kg. udl per ahett x 5:400 kg. eauh cabinet. undercarriage: the undercarriage is a welded trams made of hr sheet 3.15 mm thick conforming [0 is; 1d?48movement of the system: push pull configuration {type p utype f~2} movement of units achieved pushing or putting chrome plated 0 handle fitted suitable height on one side at body. 15 conference table of 30 seater capacity shall be an eco modular conference table enables various configurations to suit different conference rooms. it is made of particle board and has wire management facilities for uncluttered wiring. it has profiled legs with twin colored modesty for better looks, double 1350.0wx 600.0dx 750.0h, work surface top thickness is 25mm plb with pvc beading allover, legs modesty wire manager made from 18mm thick plt having curved profile.made from plt (prelaminated twin) boards 18mm thick in two shades. a wire manager running along the width of desk fitted on the modesty panel from inside. 16 corner table of size 530w x 450d x 450h built with the extremely durable rubberwood, with a very suitable cappuccino color, the table will complement any style of décor. the tapered legs provide stable support. it’s free of flaws design can accommodate your books, magazines, laptop and coffee mugs, all at once. the well thought out dimensions of the table make it easier to position it anywhere in the house. 17 dining table of 8 seater with wire manager of size 2400w * 1200d * 750h h top all tops are made from 25mm thick pre—laminated board with 2mm thick. pvc edge beading side panel all side panels are made from 25mm thick pre—laminated twin with 2mm thick pvc lipping of same color on sides and 0.8mm pvc lipping of matching color on the bottom curve, modesty these panels are made from 18mm thick pre laminated board with 0.8mm pvc lipping of matching color, access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical/data voice. sockets from top, powder coated switch mounting tray made from 0.8mm and 1.2mm m.s sheet. switches to be mounted on tray as per requirement. provision for mounting 8 — module anchor roma switch plate on switch mounting tray. wire manager rehau made from rau pvc 1309/7558 (black color). 18 file cabinet with 4 drawer width: 470mm, height: 1320mm, depth: 620mm , rigid knockdown construction, material: top, side & drawer frontmade from0.7mm thk **crca, drawer inside cover, side back side made from0.6mmthk **crca, back, bottom, drawer bottommade from 0.5mmthk **crca, **crcasteel confirming to is 513, grade d, label holder snap on type plastic label holder on drawer fronts, locking & anti tipping arrangement centralized lockingwith camlock& having antitipping arrangement to ensure that when one ,drawer is opened for use, it does not allow other drawers to be opened, finish epoxy polyester powder coated to the thickness of 50 microns (+/ 10). 19 fire proof cabinet shall be designed to protect the contents (paper media documents) against the fire hazard.shell: the external shell of the cabinet shall be of steel of minimum 2 mm thick and internal shell of steel of 1.6 mm thick, both conforming to is 513. further fortified by suitable in situ insulating fire resistant barriers to meet the required protection. the overall protection to the contents shall be minimum 70 mm on all six sides. door: the external door of the cabinet shall be of steel of minimum 2 mm thick conforming is 513 and further fortified with hard plate over the lock for burglary protection and in situ insulating fire resistant barrier material to meet required fire protection.  bolt work: the door shall be secured by four way locking mechanism / bolt work with minimum 8 moving shooting bolts of 20 mm diameter. door & body fitment: the door fits in the cabinet having tongue and groove construction that stops hot gases and high temperature to pass through and withstand temperature up to 1010 deg.c. locking: the frrc shall be equipped with a dual control high precision key lock of minimum six levers. the lock body shall be of zinc alloy and the levers in the lock shall be of brass conforming to is 410. there shall not be any dummy lever in the lock. the storage capacity shall be minimum 650 liters with minimum usable internal sizes in mm as 1620 (h) x 670 (w) x 599 (d).the cabinet shall be provided with minimum four nos. adjustable shelves. 20 office chair with seat/back assembly: the cushioned seat assembly consists of seat base moulded in glass filled poly amide, moulded polyurethane foam & upholstered with high stretch knitted polyester fabric. the cushioned back assembly consists of back inner moulded in polypropylene in situ moulded with polyurethane foam & upholstered with high stretch knitted polyester fabric. back size : 45.5 cm. (/1/) x 53.0 cm. (h) seat size : 48.5 cm. (w) x 49.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam used in seat and back cushion is moulded in density min 48 kg/m3, and hardness load 15 ± 2 kgf as per is:7888 for 25% compression. tilt mechanism, spines & spine connector: the seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. the cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. the s shaped spines moulded in high strength glass filled poly amide and the spine connector moulded in glass filled poly amide form the back spine structure involved in multi dimensional recline motion. the variable tilt angle recline motion can be adjusted with 3 position tilt limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. adjustable armrests: the assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled poly amide: the height adjustment feature should be button operated having adjustment of 6.6±0.5cm. the armrest top should be made up of integral skin pu moulded over plastic inner moulded in glass filled poly amide. pneumatic height adjustment: the seating height can be adjusted with a pneumatic gas lift having an adjustment stroke of 9.2 ± 0.3 cm pedestal assembly: the pedestal should be injection moulded in glass filled poly amide and fitted with 5 nos. twin wheel castors. the pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors twin wheel castors :5 nos. twin wheel castos are injection moulded in poly amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal. 21 hod table of size 1500 x 750 x 743 understructure: the understructure is in prelam panels, made with plt boards.drawer storage units with different combinations to support tops, made with 18mmplt boards of different colours. modesty and back panels, made with 18mm plt boards. the pedestals/storages are fitted with necessary locks plt board tops (straight edges): wenge and savannah maple plt board used for making tops. pvc membrane tops (with profiles): 22 job display board with dimensions (1200x900x150)mm board having 9 mm ply 23 tool display board (1200x900x150)mm board having 9 mm ply 24 chemistry lab table of size 4130mm x 1540mm x 900mm with pp drop sink of size 560 x 355, single tap deck mounted 8 swing goose neck, ss peg board 550x420x55 with 25 pegs. two reagent shelves of width 1050 with glass shelf. c frames all cframes assemblies should be manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 (indian standard specification for steel tubes for furniture) and all sheet metal components should be of crca confirming to is code 513:1994. the suspended under bench welded units should be supported on heavy duty steel frames fully carrying the load of worktops. c frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. the c frame shall also have skirting at back bottom side. horizontal members should be made from rectangular pipes of 2mm thickness. 25 lab table of size 4130mm x 1540mm x 900mm frames all cframes assemblies should be manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 (indian standard specification for steel tubes for furniture) and all sheet metal components should be of crca confirming to is code 513:1994. the suspended under bench welded units should be supported on heavy duty steel frames fully carrying the load of worktops. c frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. the c frame shall also have skirting at back bottom side. horizontal members should be made from rectangular pipes of 2mm thickness. cross sectional dimensions of the pipe should be 60 x 30 x 2 mm. 26 locker unit with 4 door plu + lkr (base) with stand size 1830hx380wx450d, stackibilit the add on units can be stacked width wise to formbank of lockers having common side panel, locking cam lock with lock leveroption of hasp arrangement, material crca 0.6mmthickness, rigid knockdown construction, shelf uniformly distributed load capacity per each shelf level is 35 kg maximum, hat self 4 door model at the top, finish epoxy polyester powder coated to the thickness of 50 microns (+/ 10).ventilation attractive punched pattern for ventilation 27 long table of size 1800 x 900 x 740 worktop 25 mm thick plb tops with 2mm thick pvc edge beading understructure c – frames legs 1.6 mm thick m.s c­frame supporting the top. legs dia. 38.1 x 1.6 mm thick m.s erw tube. 28 meeting table with 10 seater with wire manager of size 2400w * 1200d * 750h h top all tops are made from 25mm thick pre—laminated board with 2mm thick. pvc edge beading side panel all side panels are made from 25mm thick pre—laminated twin with 2mm thick pvc lipping of same color on sides and 0.8mm pvc lipping of matching color on the bottom curve, modesty these panels are made from 18mm thick pre laminated board with 0.8mm pvc lipping of matching color, access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical/data voice. sockets from top, powder coated switch mounting tray made from 0.8mm and 1.2mm m.s sheet. switches to be mounted on tray as per requirement. provision for mounting 8 — module anchor roma switch plate on switch mounting tray. wire manager rehau made from rau pvc 1309/7558 (black color) 29 notice board with size 4 x 3 surface material woolen felt / fabric in various colours,core material 9 mm thick soft board,backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour or 0.16 to 0.25 mm thick isi mark gp sheet,aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness 30 reception table double arch with dl top of size 2410 x 1065 x 725 worksurface, 1035 counter, d l top top clean matt pu finish 18mm thick inside radius 700.0 mm outside radius – 1350.0 mm depth – 650 mm glass frosted glass 10mm thick diamond cut finishing on edges inside radius – 1202.5mm outside radius – 1402.5mm depth – 200mm, modesty panel ms perforated sheet below worksurface : 0.8 mm (thick) x 665.0 mm (height) x 1345.0 mm (flat length) above worksurface : 0.8mm (thick) x 260 mm (height) x 1345.0 mm (flat length), legs ms tube 1.6 mm thick diameter 50.8 mm height 604 mm. 31 non magnetic small white board 4 x 3 surface material 0.62 to 0.72 mm thick laminate sheet with extra melamine surface,core material 8 mm thick particle board,backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour,aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness. 32 steel almirah of size 1981 x 916 x 486 mm multi bend construction and inter locking design and full length over apping doors and sides. three way bolting mechanism. spot welding & co2 welding. anticorrosion treated components, oven baked powder coating process. material thickness 0.9mm.top, bottom,lh & rh sides and back material thickness= 0.9mm,removable rh & lh main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm 33 steel rack of size 6x36x18 with six shelves prime quality crc sheet conforming to is 513d/10748/5986. the pitches of the slots at 19.05 mm, panel/shelves: 6 bnd bending process of 905l x 448d of load capacity 80 kgs. udl max per shelf. shelf material 0.8 mm thick ms sheet conforming to commercial quality cr 1, grade 340 of is 513, angle posts material and size rolled steel angle posts of 40 x 40 x 1.8 mm, m s sheet thickness of shelves and back (minimum) in mm 0.8, paint powder coated with lead free paint. 34 lab stool of circular type 30.0 +/ 0.5 cm and made up of 0.1+/ 0.012 cm thk cr steel. it is welded to the understructure and black powder coated ( dft 40 60 microns ). understructure assembly: the understructure is made of ms tube 2.2 +/ 0.03 cm x 0.16+/ 0.0128 cm thk ms erw tube. lt is welded ti the ms fabricated circular seat assembly and black powder coated ( dft 40 60 microns ). the understructure is provided with black pp injection moulded ferrules. 35 steel rack of size 2 6x36x18 with three shelves prime quality crc sheet conforming to is 513d/10748/5986. the pitches of the slots at 19.05 mm, panel/shelves: 6 bnd bending process of 905l x 448d of load capacity 80 kgs. udl max per shelf. shelf material 0.8 mm thick ms sheet conforming to commercial quality cr 1, grade 340 of is 513, angle posts material and size rolled steel angle posts of 40 x 40 x 1.8 mm, m s sheet thickness of shelves and back (minimum) in mm 0.8, paint powder coated with lead free paint. 36 office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side three drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock. 37 computer table of size 600w x 450d x 750h mm compact and easy to use . top made up of 1.5 cm medium density fiber. all the other panels are made of particle board. vacuum lamination of pvc has been done on the table to surface. 0.4mm lapping is used for all the other panels 38 office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18 mm thick pre laminated top size 1365 x 680 x 735 (approx.) with both side drawer unit one side three drawers & another side two drawers made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with both side drawer lock 39 principal table main desk of size 1800 x 900 x 740, eru of size 1550 x 450 x 705 made up of top 25 mm thick plain particle board (ppb) clad with 0.6mm thick post formed laminate and 1mm thick backing laminate (bdl). flat edge duly sealed with 2mm thick pvc beading., modesty 18mm thick plain particle board (ppb) clad with 1.0mm thick decorative laminate (dl) on both sides. edge sealed with 2mm thick pvc beading with 01 no. 3 drawers free standing pedestal. 40 office table with eru & pedestal of size 1350 x 750 x 750 mm + eru + pedestel main desk of size 1350 x 750 x 750 with eru of size 1200 x 450 x 750 & 01 no. 3 drawers pedestal: top panel made from 25 ±0.5 mm thk pre laminated boards as per is 12823 with 2 mm thick pvc beading on all sides. side panel the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm pvc beading on all sides. modestty 1 & 2 the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm thick pvc beading on all edges. the panel is made from 25 ±0.5 mm thk pre laminated boards as per is 12823 with 2 mm thick pvc beading on all sides, the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm pvc beading on all sides. the panel is made from 18 ±0,5 mm thk pre laminated boards as per is 12823 with 0.8 mm thick pvc beading on all edges. pedestal wooden panel ( 1 box+ 1 filling) back wooden panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with pvc beading on all sides. the panel is made from 9 ±0.5 mm thk pre laminated board. 41 steel table with stainless steel top of size 1180 x 750 x 750. worktop the top is in stainless steel brushed finish with plb insert for durability. easy to clean and maintain hygiene. side frames made from 30mm x 30mm x 1.5mm thick m.s powder coated tubes at base which are welded and are fixed to top with screws. the bottom ends are closed with plastic buffers. ms shade : s/g metallic dark grey (nerocoat 9000626), cross member made from 30mm x 30mm x 1.5mm thick m.s powder coated tube, which is welded and bolted to side frames. 42 teaching platform with the dimensions of length 6 ft x breadth 4 ft x height 1.5 ft with 19 mm plywood on top, shall be rectangular hallow box shape without legs. 43 teaching platform with the dimensions of length 12 ft x breadth 6 ft x height 1.5 ft with 19 mm plywood on top, shall be rectangular hallow box shape without legs. 44 wooden podium with dimensions: 45 h x 20 w x 15 d to 50 h x 25 w x 20 dpresenter side height: 40 to 45shelves: 20 h x 20 w x 10 d to 25 h x 25 w x 12 dproduct weight: 50 to 55 lbs.shipping weight: 65 to 70 lbs.material: scratch resistant high pressure laminate.the top of the table shall be provided 19 mm ost. the table shall be neatly finished and polished. 45 seminar chair with understructures could be revolving or fixed type as per need. option of hinge type and retractable desk let.desklet 100% voc free powder coating knock down design reducing transportation emissions designed for long life 46 office table of size 900 x 590 x 750 made of ms erw square tube 18 mm x 25mm x 1.2mm thick with pre laminated top size 1199 x 590 x 750 mm thick with single side one drawers, drawer unit made of .5mm thick ms crca sheet, all steel components have powder coated paint 47 non magnetic long white board 8 x 4 size and surface material 0.62 to 0.72 mm thick laminate sheet with extra melamine surface,core material 8 mm thick particle board,backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour,aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness. 48 double sided book rack with the dimensions width 900mm, height: 1850mm, depth: 600mm, rigid knockdown construction. construction, material crca0.8mmthickness, finish epoxypolyester powder coated to the thickness of 50 microns (+/ 10).number of adjustable shelf: five adjustable shelves on one side (total 12 loading levels). uniformlydistributed load capacity per each shelf is 80 kgmaximum. label holder & range indicator label holder & range indicator on eachmain unit for inserting labels. 49 single sided book rack with the dimensions width 900mm, height: 1850mm, depth: 316mm, rigid knockdown construction, material crca 0.8 mm thickness,finish: epoxypolyester powder coated to the thickness of 50 microns (+/ 10).,number of adjustable shelf five adjustable shelves. (total 6 loading levels). uniformlydistributed load capacity per each shelf is 80 kg maximum, label holder & range indicator label holder & range indicator on eachmain unit for inserting labels. 50 magazine rack with overall dimensions of all steel periodical display rack shall be 900mm(w)x450mm(d)x1830mm(h). rigid knockdown construction ,panels shall be made from crca 0.6 mm thick and front frame shall be made from crca 0.8 mm thick . crca d grade as per is 513 . there shall be 5 level racks , display tray shall be suitable for fullscape size magazines,periodicals, aesthetically appealing metal tray at an angle for easy viewing . receding facility to access the storage behind . sliding on plastic rollers . behind storage shelving each of 5 level has a behind storage shelf . uniformly distributed load capacity per each shelf is 40 kg . leveler shall be screw type with hex plastic base and finish shall be epoxy polyester powder coated to the thickness of 50 microns. 51 almirah with glass door size 916mm(w) x 486mm(d) x 1980mm #(h) # excluding leveler, construction & material • welded construction, • 0.7mm thk (±0.07mm) crca* for shelf,• 0.8mm thk (±0.08mm) high yield strength crca** for doors and back,• 0.9mm thk (±0.08mm) crca* for all other components,crca ‘d’ grade as per is:513,crca ‘d’ grade high yield strength as per is:513,locking & handle • brass handle with • two way locking mechanism with shooting bolt, shelves • height wise adjustable shelf mounting • uniformly distributed load capacity per each full shelf is 40 kg maximum, • 4nos. of adjustable full shelf, • box file a4 size (85wx345hx285d) can be stored vertically on three shelves and the clear space above fourth shelf is 240mm,• m10 screw type leveler with hex plastic base,finish • epoxy powder coated to the thickness of 50 microns (+ 10). 52 dual desk is specially designed for rugged use with overall dimentions of l1054 x w980 x h760 mm and all edges are fillet. the desk is made of pressed formed ms crca section & crca tube fitted with pre laminated particle board top, seat & back with injection molded ppcp edge. hanger for water bottle and bag. space for keeping pen, pencil and scale. the overall appearance of the product shall be as per photograph.top injection molded ppcp edge. size : 1054x450x18 mm thk. particle board.seat injection molded ppcp edge. seat height : 450 mm , seat size : 1054x304x18 mm thk. particle board.back injection molded ppcp edge. back size : 1054x154x18 mm thk. particle board.shelf shelf 0.8 mm thk. crca sheet. bullnose front edge with stiffner 1 mm thk crca.modesty modesty 0.8 mm thk. crca sheet. slot perforated.tie members horizontal tie members 25x25x1.2 mm thk. crca pipe.footrest footrest pressed formed crca section 1.5 mm thk. side frame side frame c section pressed formed 1 mm thk.crca sheet welded with 25x50x1.2 mm thk tube. and back rest pipe ø25 x 1.2 mm thk. top end rounded.cap & levellers all pipe caps are curved ppcp material.finish all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. 53 item deleted vide e.n.c. bcd , patna letter no. 6010(bh) anu dated 11.10.2021 54 item deleted vide e.n.c. bcd, patna letter no. 6010(bh) anu dated 11.10.2021 55 dressing table of size 460w x 486d x 1710h mm , mirror w x h: 362 mm x 1156 mm dressing table comes with a long mirror, two storage drawers, and a stool. available in wenge color, the dresser is crafted from good quality mdf wood, making it sturdy and lasting. the shelves of this stylish dressing table can be used to keep items like perfume bottles, hair products, and medicines, for that clutter free look. the stool, also wenge color with an orange colored cushion, offers comfortable seating, while the full length mirror is perfect to dress up, and check your overall ensemble. 56 steel almirah with mirror of size 900w x 507d x 1950h mm rafted from prime steel, your slimline cupboard will be resistant to corrosion and peststhis cupboard comes with 2 easily adjustable shelvesthe hanging rod inside the cupboard ensures ample space for your daily wear, suits, sarees and/or dressesknock down construction makes shifting and handling of slimline easieravailable with over head unit option to maximize vertical space usage you can also choose to have a mirror with slimlinestylish snap shut flush handle enhances slimline’s aesthetics. 57 auditorium chair seat/back assembly: the seat and back are made up of 1.2±0.1 cm. thick hot pressed plywood measured as per qa method described in ocp qlta p14 18 and upholstered with fabric and moulded polyurethane foam. the back is, flexing type.back size 47.0 cm. (w) x 51.0 cm. (h), seat size 47.0 cm. (w) x 47.0 cm. (d). 2. high resilience (hr) polyurethane foam: the hr polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf as per is:7888 for 25% compression.3. armrests :the one piece armrests are made of black integral skin polyurethane foam with 50 70 shore hardness and reinforced with m.s. insert. the armrests are scratch and weather resistant.5. understructure assembly: it is made of dia. 2.54±0.03cm. x 0.2±0.016cm. thk. m.s.e.r.w. tube with connecting strips made of 0.5 ± 0.05 cm. thk. hr steel welded to it for holding the seat. the assembly is powder coated ( dft 40 60 microns ).the auditorium chair is designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre requisite godrej doc no: stg 129368.overall width 57.0, depth 57.0, height 86.0, seat height 44.0 cm. 58 movable chair made out of stainless steel, understructure seat and back are made up of injection moulded high impact strength polypropylene polymer compound with indoor grade uv resistance *seat size: 52.5 cm. (w) x 53.2 cm. (d), * back size : 51.6 cm. (w) x 40.5 cm. (h) .s.s. understructure: the tubular welded frame is made from dia 2.22 ± 0.03 cm x o.12 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.12 ± 0.0128 cm stainless steel 202 grade tube. the tubes are buff polished to give shiny finish. 59 hostel bed made out of steel with overall size length 1994mm, width 907mm, height 822/623/ rest height 450mm, structure of metal bed frame including legs and head structure mild steel pipe, head board shape of headboard semi circular, thickness of hollow section in structure (1.2mm), support panel for placement of mattresses mild steel hollow box rectangular section, thickness of support panel (in 1.2mm), material of head board mild steel erw tube is:7138 square tube of 38.1 mm x 1.2 mm thick, material of mattress panel ms perforated / sheet, thickness of mattress panel 1.2 (mm), size of support members in mm (±5 mm) 50 x 50mm, number of support members is 04 nos., paint /finish of all m s parts powder coating 60 micron. 60 dining table of 8 seater with wire manager of size 2400w * 1200d * 750h h top all tops are made from 25mm thick pre—laminated board with 2mm thick. pvc edge beading side panel all side panels are made from 25mm thick pre—laminated twin with 2mm thick pvc lipping of same color on sides and 0.8mm pvc lipping of matching color on the bottom curve, modesty these panels are made from 18mm thick pre laminated board with 0.8mm pvc lipping of matching color, access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical/data voice. sockets from top, powder coated switch mounting tray made from 0.8mm and 1.2mm m.s sheet. switches to be mounted on tray as per requirement. provision for mounting 8 — module anchor roma switch plate on switch mounting tray. wire manager rehau made from rau pvc 1309/7558 (black color). 61 item deleted vide e.n.c. bcd, patna letter no. 6010(bh) anu dated 11.10.2021 62 study chair is made of blow molded high density polyethylene andis fixed on the understructure assembly with the help of stainless steel pop rivets.seat: seat is made of blow molded high density polyethylene and is fixed on the understructure assembly.understructure all side metal frames and cross connectors are made from mild steel erw tubes ,40 x 20 x 2mm thk(approx. 14 swg) as per 1s:7138 which are welded togetherthe welded structures and cross connectors are coated with min 45 micron thickness of epoxy polyester coating. bag storage tray made of 04 mild steel rod (as per 15:432) forms a cage at the bottom and is welded to the main understructure. seat support channel made of 1mm thk mild steel sheet (as per is:513) is welded to the understructure for fixing seat. plastic caps plastic caps made of polypropylene are provided on the foot rest side tubes and back leg tubes adding more aestheic value to the product. 63 study table with all sides metal frames and cross connectors are made from mild steel erw tubes ,40 x 20 x 2mm thk(approx. 14 swg) as per 15:7138 which are welded together.the welded structures and cross connectors are coated with min 45 micron thickness of epoxy polyester coating. shelf tray and desktop mounting brackets made of 2mm thk mild steel sheet(as per 15:513) are welded to the understructure for fixing shelf tray and desktop respectively. hooks are provided ori the vertical side frames on both sides of the desk for hanging bags/bottles. they are made from 09 mild steel rod (as per 15:432) and are welded to the main understructure plastic caps: plastic caps made of polypropylene are provided on the foot rest side tubes and front leg tubes adding more aestheic value to the product. ...

Building Construction Department - Bihar

31163384 supplying and installation furniture for new govt. polytechnic, khagaria 1 1 drawer office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side one drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock. 2 2 seater sofa overall size 1130w x 700d x 785 h cm, seat height 43.5 cm side frame assembly: the side frame assembly is fitted to the two ends of the connecting beam assembly to form, the leg cum armrest assembly. it is made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick ms e.r.w. tube and powder coated ( dft 40 60 microns ) . the ends are fitted with abs moulded end caps, 3. seatrest assembly:the seat rest assembly consists of a fabricated inner frame assembly insitu moulded high resilience ( hr ) polyurethane foam having density = 45 + / 2 kg / m3 with hardness load 25 ± 2 kgf as per is:7888 for 25% compression of the foam. the complete moulded seat rest assembly is covered with a replaceable fabric upholstery cover *seat size: 52.0cm. ( w ) x 50.0cm. ( d ) x 6.0cm. ( t ) , 4. backrest assembly:the backrest assembly is flexing type and consists of a fabricated inner frame assembly insitu moulded with high resilience ( hr ) polyurethane foam having density = 45 +1 2 kg / m3 with hardness load 14 ± 2 kgf as per is:7888 for 25% compression of the foam. the complete moulded backrest assembly is covered with a replaceable fabric upholstery cover. *back size: 52.0cm. ( w ) x 59.0cm. ( h ) x 6.0cm. ( t ) , 5. adj. glides: the adj glide is injection moulded in black nylon & fitted to the front end of side frame assembly along with abs moulded adj. glide base to take care or unleveled floor surface 3 ( 3+1+1 ) seater sofa the side frame assembly made of 38mm dia 2mm thick is fitted to the two ends of the connecting beam assembly to form the leg cum armrest assembly. it is made of a ms. e.r.w. tube duly powder coated. the ends are fitted with abs moulded end caps. tie member: it is the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members are used to connect the side frames. the tie member is made of ms. e.r.w. tube 40mmx40mm 2mm thick duly powder coated. the seat / back assemblies are mounted on the tie member. l bracket of 6mm thick steel connects the back to the tie member assembly. seat foam is of 45 + / 5 kg / m3 and back foam is of 32 + / 5 kg / m3 with hardness of 25+ / 2 on hampden m / c. at 25% compression of the foam. seat size 52cm widex50cm deep and back size 52 cm wide and 60cm high. back of the sofa flexes for additional comfort 1 seater –601mmwx700mmdx 810mmh, 3 seater –1640w x 700d x 785 h cm 4 3 seater steel chair cross beammade of ms erw rectangular black powder coated tube of 80 x 40 x 2 mm leg & arm rest chrome plated made of cold rolled steel. arm rest & leg assembled to the cross beam with m10 x 100 mm bolts. seat & back 1.6mm thick powder coated perforated shell of cold rolled ms sheet. side bar of chrome plated solid steel 30 x 12 mm ( din 174 ) with flunting & plastic insert .the shell is assembled on the cross beam with help of m8 bolts the overall dimension is 1608mm ( l ) x 695mm ( h ) x 555mm ( d ) , seat height : 405mm 5 bed side locker with one cabinet and one drawer unit . the drawer as well as cabinet is provided with cam lock. there is a gap between the drawer unit and cabinet, to keep the general items for frequent use . castors are provided for easy handling. astainless steel tray is provided at top with raised borders on three sides dimensions ( l ) 402mmx ( w ) 422mmx ( h ) 840mm. drawer has ball slide for easy operation and lock for safety. telescopic ball slides are used for easy and smooth operation of the drawer. plastic moulded castor, 2 castor with lock. recessed handle is provided to open the cabinet door. 6 work bench of size 4’ x 3’, angle 1.5 x 1.5 with 2 pair of legs with work top with overall dimensions. 1200mm l x 900mm d x 950mm h, the worktop of mdf ext garde is12406 wood. max udl 1500kgs the worktop should be made of various layers of beech wood which are planed, glued and pressed together. this should make the work top non deformable, and load and wear resistant. this shall be covered with 4mm steel sheet. leg: the bench leg should be powder coated should be 80mm l x 1265mm d x 960mm h. back bracing for stability 7 centre table of size 1200w x 600d x 378h built with the extremely durable rubberwood, the table can hold weight up to 25kgs. with a very suitable cappuccino color, the table will complement any style of décor. the tapered legs provide stable support. it’s free of flaws design can accommodate your books, magazines, laptop and coffee mugs, all at once. the well thought out dimensions of the table make it easier to position it anywhere in the house 8 work bench of size 8’ x 4’ with 2 pair of legs with work top with overall dimensions. 2400mm l x 1200mm d x 950mm h, the worktop of mdf ext garde is12406 wood. max udl 1500kgs made of various layers of beech wood which are planed, glued and pressed together. this should make the work top non deformable, and load and wear resistant. bench leg: the bench leg should be powder coated should be 80mm l x 1265mm d x 960mm h. back bracing for stability 9 executive chair with cushioned seat is made of injection molded plastic outer & inner. plastic inner is upholstered with stitched cover and moulded high resilience polyurethane foam of density 4542 kg / m*, and hardness load 16 + 2 kgf as per 15:7888 for 25% compression.the stitched cover is made from spacer fabric and leatherette seat size : 47.0 cm. ( w ) x 48.0 cm. ( d ) , tunular frame : the powder coated ( dft 40 60 micron ) tubular frame is cantilever type & made of 02.5440.03 cm x 0.240.016 cm thk ms erw tube.the back connected to frame through powder coated ( dft 40 60 micron ) high pressure die cast connector. 10 office chair with seat and back are made from seasoned wood and plywood. the same is upholstered with black synthetic leather and polyurethane foam. back size 46.0cm ( w ) x27.0cm ( h ) . seat size 46.0cm ( w ) x40.0cm ( h ) . the armrest is gas assisted injection moulded from black polypropylene. the understructure assembly is a cantilever type frame.width of the chair 58cm, depth 56.5cm, height 87.5cm, seat height 48cm. 11 office chair : the seat and back are made up of 1.2 ±0.1cm. thick hot pressed plywood measured as per qa method described in ocp qlta p14 18 and upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam is designed with contoured lumbar support for extra comfort. back size 49.0 cm. ( w ) x 47.0 cm. ( h ) , seat size 49.0 cm. ( w ) x 44.0 cm. ( id ) high resilience ( hr ) polyurethane foam: the hr polyurethane foam is moulded with density = 45 ±2 kg / m3 and hardness load 16 ± 2 kgf as per is:7888 for 25% compression. 12 principal chair: the seat is made up of 1.4± 0.1 chick hot press 4 plywood upholstered with fabric and moulded polyurethane foam. it has a seat depth adjustment of 5.0±0.3 cm integrated in the seat through a sliding mechanism. seat size: 50.0cm ( w ) x 49.0cm ( d ) .the back is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustable lumbar support made of injection moulded polypropylene having an adjustment of 6.0±0.1cm.backsize: 50.0cm ( w ) x68.0 cm ( h ) .the polyurethane foam for seat is of density 55± 5kg / m3. it is made of glass filled polyamide arm structure with pu arm top and height adjustment of 7.0 ±0.5cm.the arm top has swivel and to for movements. to for movement is 6.0± 0.5cm.the inner tube of armrest is chrome plated. the mechanism is designed with the following features:• 360° revolving type.• centre tilt synchro• 3 position ( including upright lock ) giving option of variable tilt angle to the chair with anti shock feature. the headrest is injection moulded din glass filled polypropylene which is upholstered with foam and fabric has an adjustment of 6.0± 0.1cm & its assembled over the full back chair. the pneumatic height adjustment is chrome plated with an adjustment stroke of 9.0 ± 0.3cm.the pedestal is high pressure die cast polished aluminum and fitted with 5 nos. twin wheel castors. the pedestal is 65.0±0.5 cm p.c.d. the twin wheel castors are injection moulded in black glass filled polyamide having 6.0±0.1cm wheel diameter. the chrome plated tubular frame is made of día2.8±0.03cm x0.2±0.02 cm the m.s. round tube. the frame is fitted with plastic caps made of injection moulded glass filled polypropylene. 75 ( w ) * 75 ( d ) * 115 130 ( h ) * 44.5 53.5 ( sh ) . 13 computer chair with seat and back are made uo injection moulded high impact strenght polypropylene polymer compound with indoor graade uv resistance.the tubular weled frame is made from dia2.22 + / 0.03cmx 0.12+ / 0.0128 cm and 3.5+ / 0.03 cm x 0.12+ / 0.0128 am stainless steel 202 grade tube.the tube are buff polished to give shiny finish. cm. the shoes are made of high impact strenght polypropylene polymer. compond with indoor grad uv resistance and pressed fitted with tubularfram. size : ( w ) 52.5cm* ( d ) 55.8cm* ( h ) 84.5cm* ( seat h ) 45.0 cmseat size 52.5cm ( w ) *53.2 cm ( d ) back size 51.6 cm ( w ) *40.5 cm ( h ) . 14 office chair mid back pneumatic height adjustment cushioned revolving chair made up of 1.2cm thick hot pressed ply wood seat & back upholstered with fabric with moulded polyurethane foam together with moulded abs seat & back integral skin polyurethane with reinforced with m.s. insert. the tilt mechanism adjustment upright locking, 360 degree revolving type fitted with 05 nos. twin wheel castor dia 5 cm. 15 compactor on 12 feet rail length moves on rails. the cabinet body rigid knock down construction made of 0.8 thick crca steel eonforming to is: 513 gld. body units are bolted to undercarriage. optimizer height from ground is 2081 ] mm ( 1930 hody+ 65 under 35 channel systems ] finish: — the bodies inciuding shelves are given anti rust surface treatment 8‘ are powder coated with epoxy polyester powder oven backed with a controlled temperature of 130 deg. to 200 deg. c.sheif:l made of 0.8 thick crca steel conforming to is;513 gd. max load bearing capacin is fit! kg. udl per ahett x 5:400 kg. eauh cabinet. undercarriage: the undercarriage is a welded trams made of hr sheet 3.15 mm thick conforming [ 0 is; 1d?48movement of the system: push pull configuration { type p utype f~2 } movement of units achieved pushing or putting chrome plated 0 handle fitted suitable height on one side at body. 16 conference table of 30 seater capacity shall be an eco modular conference table enables various configurations to suit different conference rooms. it is made of particle board and has wire management facilities for uncluttered wiring. it has profiled legs with twin colored modesty for better looks, double 1350.0wx 600.0dx 750.0h, work surface top thickness is 25mm plb with pvc beading allover, legs modesty wire manager made from 18mm thick plt having curved profile.made from plt ( prelaminated twin ) boards 18mm thick in two shades. a wire manager running along the width of desk fitted on the modesty panel from inside. 17 corner table of size 530w x 450d x 450h built with the extremely durable rubberwood, with a very suitable cappuccino color, the table will complement any style of décor. the tapered legs provide stable support. it’s free of flaws design can accommodate your books, magazines, laptop and coffee mugs, all at once. the well thought out dimensions of the table make it easier to position it anywhere in the house. 18 dining table of 8 seater with wire manager of size 2400w * 1200d * 750h h top all tops are made from 25mm thick pre—laminated board with 2mm thick. pvc edge beading side panel all side panels are made from 25mm thick pre—laminated twin with 2mm thick pvc lipping of same color on sides and 0.8mm pvc lipping of matching color on the bottom curve, modesty these panels are made from 18mm thick pre laminated board with 0.8mm pvc lipping of matching color, access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical / data voice. sockets from top, powder coated switch mounting tray made from 0.8mm and 1.2mm m.s sheet. switches to be mounted on tray as per requirement. provision for mounting 8 — module anchor roma switch plate on switch mounting tray. wire manager rehau made from rau pvc 1309 / 7558 ( black color ) . 19 file cabinet with 4 drawer width: 470mm, height: 1320mm, depth: 620mm , rigid knockdown construction, material: top, side & drawer frontmade from0.7mm thk **crca, drawer inside cover, side back side made from0.6mmthk **crca, back, bottom, drawer bottommade from 0.5mmthk **crca, **crcasteel confirming to is 513, grade d, label holder snap on type plastic label holder on drawer fronts, locking & anti tipping arrangement centralized lockingwith camlock& having antitipping arrangement to ensure that when one , drawer is opened for use, it does not allow other drawers to be opened, finish epoxy polyester powder coated to the thickness of 50 microns ( + / 10 ) . 20 fire proof cabinet shall be designed to protect the contents ( paper media documents ) against the fire hazard.shell: the external shell of the cabinet shall be of steel of minimum 2 mm thick and internal shell of steel of 1.6 mm thick, both conforming to is 513. further fortified by suitable in situ insulating fire resistant barriers to meet the required protection. the overall protection to the contents shall be minimum 70 mm on all six sides. door: the external door of the cabinet shall be of steel of minimum 2 mm thick conforming is 513 and further fortified with hard plate over the lock for burglary protection and in situ insulating fire resistant barrier material to meet required fire protection.  bolt work: the door shall be secured by four way locking mechanism / bolt work with minimum 8 moving shooting bolts of 20 mm diameter. door & body fitment: the door fits in the cabinet having tongue and groove construction that stops hot gases and high temperature to pass through and withstand temperature up to 1010 deg.c. locking: the frrc shall be equipped with a dual control high precision key lock of minimum six levers. the lock body shall be of zinc alloy and the levers in the lock shall be of brass conforming to is 410. there shall not be any dummy lever in the lock. the storage capacity shall be minimum 650 liters with minimum usable internal sizes in mm as 1620 ( h ) x 670 ( w ) x 599 ( d ) .the cabinet shall be provided with minimum four nos. adjustable shelves. 21 office chair with seat / back assembly: the cushioned seat assembly consists of seat base moulded in glass filled poly amide, moulded polyurethane foam & upholstered with high stretch knitted polyester fabric. the cushioned back assembly consists of back inner moulded in polypropylene in situ moulded with polyurethane foam & upholstered with high stretch knitted polyester fabric. back size : 45.5 cm. ( / 1 / ) x 53.0 cm. ( h ) seat size : 48.5 cm. ( w ) x 49.0 cm. ( d ) high resilience ( hr ) polyurethane foam: the hr polyurethane foam used in seat and back cushion is moulded in density min 48 kg / m3, and hardness load 15 ± 2 kgf as per is:7888 for 25% compression. tilt mechanism, spines & spine connector: the seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. the cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. the s shaped spines moulded in high strength glass filled poly amide and the spine connector moulded in glass filled poly amide form the back spine structure involved in multi dimensional recline motion. the variable tilt angle recline motion can be adjusted with 3 position tilt limit feature which should be inbuilt in seat base and the tension ( return force ) should be user weight dependent. adjustable armrests: the assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled poly amide: the height adjustment feature should be button operated having adjustment of 6.6±0.5cm. the armrest top should be made up of integral skin pu moulded over plastic inner moulded in glass filled poly amide. pneumatic height adjustment: the seating height can be adjusted with a pneumatic gas lift having an adjustment stroke of 9.2 ± 0.3 cm pedestal assembly: the pedestal should be injection moulded in glass filled poly amide and fitted with 5 nos. twin wheel castors. the pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors twin wheel castors :5 nos. twin wheel castos are injection moulded in poly amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal. 22 hod table of size 1500 x 750 x 743 understructure: the understructure is in prelam panels, made with plt boards.drawer storage units with different combinations to support tops, made with 18mmplt boards of different colours. modesty and back panels, made with 18mm plt boards. the pedestals / storages are fitted with necessary locks plt board tops ( straight edges ) : wenge and savannah maple plt board used for making tops. pvc membrane tops ( with profiles ) : 23 job display board with dimensions ( 1200x900x150 ) mm board having 9 mm ply 24 tool display board ( 1200x900x150 ) mm board having 9 mm ply 25 chemistry lab table of size 4130mm x 1540mm x 900mm with pp drop sink of size 560 x 355, single tap deck mounted 8 swing goose neck, ss peg board 550x420x55 with 25 pegs. two reagent shelves of width 1050 with glass shelf. c frames all cframes assemblies should be manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 ( indian standard specification for steel tubes for furniture ) and all sheet metal components should be of crca confirming to is code 513:1994. the suspended under bench welded units should be supported on heavy duty steel frames fully carrying the load of worktops. c frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. the c frame shall also have skirting at back bottom side. horizontal members should be made from rectangular pipes of 2mm thickness. 26 lab table of size 4130mm x 1540mm x 900mm frames all cframes assemblies should be manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 ( indian standard specification for steel tubes for furniture ) and all sheet metal components should be of crca confirming to is code 513:1994. the suspended under bench welded units should be supported on heavy duty steel frames fully carrying the load of worktops. c frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. the c frame shall also have skirting at back bottom side. horizontal members should be made from rectangular pipes of 2mm thickness. cross sectional dimensions of the pipe should be 60 x 30 x 2 mm. 27 locker unit with 4 door plu + lkr ( base ) with stand size 1830hx380wx450d, stackibilit the add on units can be stacked width wise to formbank of lockers having common side panel, locking cam lock with lock leveroption of hasp arrangement, material crca 0.6mmthickness, rigid knockdown construction, shelf uniformly distributed load capacity per each shelf level is 35 kg maximum, hat self 4 door model at the top, finish epoxy polyester powder coated to the thickness of 50 microns ( + / 10 ) .ventilation attractive punched pattern for ventilation 28 long table of size 1800 x 900 x 740 worktop 25 mm thick plb tops with 2mm thick pvc edge beading understructure c – frames legs 1.6 mm thick m.s c­frame supporting the top. legs dia. 38.1 x 1.6 mm thick m.s erw tube. 29 bed mattress of size ( l ) 1900 x ( w ) 900 x ( h ) 100 mm providing and supplying sheet bed mattress 100mm the bed should be provided with 40 density 100mm thick single section pu from mattress which should be covered with heavy helium material is water proof , flame retardent vapour and x ray permeablee.the zip and stiches for the mattress cover should be concealed.the manufacturer should be compliant with iso 9001 , 14001, 13485 and ohsas 1800 and ce certification. the work shall be carried as per instruction of engineer in charge. 30 meeting table with 10 seater with wire manager of size 2400w * 1200d * 750h h top all tops are made from 25mm thick pre—laminated board with 2mm thick. pvc edge beading side panel all side panels are made from 25mm thick pre—laminated twin with 2mm thick pvc lipping of same color on sides and 0.8mm pvc lipping of matching color on the bottom curve, modesty these panels are made from 18mm thick pre laminated board with 0.8mm pvc lipping of matching color, access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical / data voice. sockets from top, powder coated switch mounting tray made from 0.8mm and 1.2mm m.s sheet. switches to be mounted on tray as per requirement. provision for mounting 8 — module anchor roma switch plate on switch mounting tray. wire manager rehau made from rau pvc 1309 / 7558 ( black color ) 31 notice board with size 4 x 3 surface material woolen felt / fabric in various colours, core material 9 mm thick soft board, backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour or 0.16 to 0.25 mm thick isi mark gp sheet, aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness 32 magazine rack with overall dimensions of all steel periodical display rack shall be 900mm ( w ) x450mm ( d ) x1830mm ( h ) . rigid knockdown construction , panels shall be made from crca 0.6 mm thick and front frame shall be made from crca 0.8 mm thick . crca d grade as per is 513 . there shall be 5 level racks , display tray shall be suitable for fullscape size magazines, periodicals, aesthetically appealing metal tray at an angle for easy viewing . receding facility to access the storage behind . sliding on plastic rollers . behind storage shelving each of 5 level has a behind storage shelf . uniformly distributed load capacity per each shelf is 40 kg . leveler shall be screw type with hex plastic base and finish shall be epoxy polyester powder coated to the thickness of 50 microns. 33 patient bed with overall size ( l ) 2106mm x ( w ) 914mm x ( h ) 614mm , head board / leg board frame ms erw round tube thickness 1.6mm , lying surface 1.0mm crca sheet leg shoe neoprene rubber with reinforced metal washer for avoiding wear of legs. mosquito net pole holder provision for mounting of mosquito net pole, iv pole holder provision for mounting of iv pole , powder coating anti rust thermosetting epoxy polyster , formulated to fulfill the requirement for surface protection maximum patient load 135 kg . 34 reception table double arch with dl top of size 2410 x 1065 x 725 worksurface, 1035 counter, d l top top clean matt pu finish 18mm thick inside radius 700.0 mm outside radius – 1350.0 mm depth – 650 mm glass frosted glass 10mm thick diamond cut finishing on edges inside radius – 1202.5mm outside radius – 1402.5mm depth – 200mm, modesty panel ms perforated sheet below worksurface : 0.8 mm ( thick ) x 665.0 mm ( height ) x 1345.0 mm ( flat length ) above worksurface : 0.8mm ( thick ) x 260 mm ( height ) x 1345.0 mm ( flat length ) , legs ms tube 1.6 mm thick diameter 50.8 mm height 604 mm. 35 non magnetic small white board 4 x 3 surface material 0.62 to 0.72 mm thick laminate sheet with extra melamine surface, core material 8 mm thick particle board, backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour, aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness. 36 steel top stool overall dimension: overall size diagonal sizes diagonal leg dia. 538mm ( h ) 470min 655max . top plate should made of ss202 made sheet with spin section of thickness 1mm and should non corresive. it should have a diameter of 350mm seat base should made of ms ring and rectangular tube. en8 screw having dia of 22mm should be used for height adjustment of the seat base .the round hub should be made of ms erw tube haiving dia of 38mm and thickness 2mm . the hub should be welded with the legs and it should accommodated and cover the lid screw mechanism. the understructure should consist of 4 legs made up of ms erw tube of dia 25.4mm and 1.6mm thick. the press formed pipe leg should give a round and clean lock. the legs should be provided with 4 nos of nylon 6 bush. all metal components should be pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbial epoxy polyster powder coating to fulfill the requirements bactarial protection against at last 2 commnly found bactaria in hospital environment ( gram positive and gram negative ) . safe working load must be 135 kg. 37 steel almirah of size 1981 x 916 x 486 mm multi bend construction and inter locking design and full length over apping doors and sides. three way bolting mechanism. spot welding & co2 welding. anticorrosion treated components, oven baked powder coating process. material thickness 0.9mm.top, bottom, lh & rh sides and back material thickness= 0.9mm, removable rh & lh main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm 38 steel rack of size 6x36x18 with six shelves prime quality crc sheet conforming to is 513d / 10748 / 5986. the pitches of the slots at 19.05 mm, panel / shelves: 6 bnd bending process of 905l x 448d of load capacity 80 kgs. udl max per shelf. shelf material 0.8 mm thick ms sheet conforming to commercial quality cr 1, grade 340 of is 513, angle posts material and size rolled steel angle posts of 40 x 40 x 1.8 mm, m s sheet thickness of shelves and back ( minimum ) in mm 0.8, paint powder coated with lead free paint. 39 lab stool of circular type 30.0 + / 0.5 cm and made up of 0.1+ / 0.012 cm thk cr steel. it is welded to the understructure and black powder coated ( dft 40 60 microns ) . understructure assembly: the understructure is made of ms tube 2.2 + / 0.03 cm x 0.16+ / 0.0128 cm thk ms erw tube. lt is welded ti the ms fabricated circular seat assembly and black powder coated ( dft 40 60 microns ) . the understructure is provided with black pp injection moulded ferrules. 40 steel rack of size 2 6x36x18 with three shelves prime quality crc sheet conforming to is 513d / 10748 / 5986. the pitches of the slots at 19.05 mm, panel / shelves: 6 bnd bending process of 905l x 448d of load capacity 80 kgs. udl max per shelf. shelf material 0.8 mm thick ms sheet conforming to commercial quality cr 1, grade 340 of is 513, angle posts material and size rolled steel angle posts of 40 x 40 x 1.8 mm, m s sheet thickness of shelves and back ( minimum ) in mm 0.8, paint powder coated with lead free paint. 41 office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side three drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock. 42 computer table of size 600w x 450d x 750h mm compact and easy to use . top made up of 1.5 cm medium density fiber. all the other panels are made of particle board. vacuum lamination of pvc has been done on the table to surface. 0.4mm lapping is used for all the other panels 43 office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18 mm thick pre laminated top size 1365 x 680 x 735 ( approx. ) with both side drawer unit one side three drawers & another side two drawers made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with both side drawer lock 44 principal table main desk of size 1800 x 900 x 740, eru of size 1550 x 450 x 705 made up of top 25 mm thick plain particle board ( ppb ) clad with 0.6mm thick post formed laminate and 1mm thick backing laminate ( bdl ) . flat edge duly sealed with 2mm thick pvc beading., modesty 18mm thick plain particle board ( ppb ) clad with 1.0mm thick decorative laminate ( dl ) on both sides. edge sealed with 2mm thick pvc beading with 01 no. 3 drawers free standing pedestal. 45 office table with eru & pedestal of size 1350 x 750 x 750 mm + eru + pedestel main desk of size 1350 x 750 x 750 with eru of size 1200 x 450 x 750 & 01 no. 3 drawers pedestal: top panel made from 25 ±0.5 mm thk pre laminated boards as per is 12823 with 2 mm thick pvc beading on all sides. side panel the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm pvc beading on all sides. modestty 1 & 2 the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm thick pvc beading on all edges. the panel is made from 25 ±0.5 mm thk pre laminated boards as per is 12823 with 2 mm thick pvc beading on all sides, the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm pvc beading on all sides. the panel is made from 18 ±0, 5 mm thk pre laminated boards as per is 12823 with 0.8 mm thick pvc beading on all edges. pedestal wooden panel ( 1 box+ 1 filling ) back wooden panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with pvc beading on all sides. the panel is made from 9 ±0.5 mm thk pre laminated board. 46 steel table with stainless steel top of size 1180 x 750 x 750. worktop the top is in stainless steel brushed finish with plb insert for durability. easy to clean and maintain hygiene. side frames made from 30mm x 30mm x 1.5mm thick m.s powder coated tubes at base which are welded and are fixed to top with screws. the bottom ends are closed with plastic buffers. ms shade : s / g metallic dark grey ( nerocoat 9000626 ) , cross member made from 30mm x 30mm x 1.5mm thick m.s powder coated tube, which is welded and bolted to side frames. 47 teaching platform with the dimensions of length 6 ft x breadth 4 ft x height 1.5 ft with 19 mm plywood on top, shall be rectangular hallow box shape without legs. 48 teaching platform with the dimensions of length 12 ft x breadth 6 ft x height 1.5 ft with 19 mm plywood on top, shall be rectangular hallow box shape without legs. 49 wooden podium with dimensions: 45 h x 20 w x 15 d to 50 h x 25 w x 20 d presenter side height: 40 to 45 shelves: 20 h x 20 w x 10 d to 25 h x 25 w x 12 d product weight: 50 to 55 lbs. shipping weight: 65 to 70 lbs. material: scratch resistant high pressure laminate. the top of the table shall be provided 19 mm ost. the table shall be neatly finished and polished. 50 seminar chair with understructures could be revolving or fixed type as per need. option of hinge type and retractable desk let. desklet 100% voc free powder coating knock down design reducing transportation emissions designed for long life 51 office table of size 900 x 590 x 750 made of ms erw square tube 18 mm x 25mm x 1.2mm thick with pre laminated top size 1199 x 590 x 750 mm thick with single side one drawers, drawer unit made of .5mm thick ms crca sheet, all steel components have powder coated paint 52 non magnetic long white board 8 x 4 size and surface material 0.62 to 0.72 mm thick laminate sheet with extra melamine surface, core material 8 mm thick particle board, backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour, aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness. 53 double sided book rack with the dimensions width 900mm, height: 1850mm, depth: 600mm, rigid knockdown construction. construction, material crca0.8mmthickness, finish epoxypolyester powder coated to the thickness of 50 microns ( + / 10 ) .number of adjustable shelf: five adjustable shelves on one side ( total 12 loading levels ) . uniformlydistributed load capacity per each shelf is 80 kgmaximum. label holder & range indicator label holder & range indicator on eachmain unit for inserting labels. 54 single sided book rack with the dimensions width 900mm, height: 1850mm, depth: 316mm, rigid knockdown construction, material crca 0.8 mm thickness, finish: epoxypolyester powder coated to the thickness of 50 microns ( + / 10 ) ., number of adjustable shelf five adjustable shelves. ( total 6 loading levels ) . uniformlydistributed load capacity per each shelf is 80 kg maximum, label holder & range indicator label holder & range indicator on eachmain unit for inserting labels. 55 almirah with glass door size 916mm ( w ) x 486mm ( d ) x 1980mm # ( h ) # excluding leveler, construction & material • welded construction, • 0.7mm thk ( ±0.07mm ) crca* for shelf, • 0.8mm thk ( ±0.08mm ) high yield strength crca** for doors and back, • 0.9mm thk ( ±0.08mm ) crca* for all other components, crca ‘d’ grade as per is:513, crca ‘d’ grade high yield strength as per is:513, locking & handle • brass handle with • two way locking mechanism with shooting bolt, shelves • height wise adjustable shelf mounting • uniformly distributed load capacity per each full shelf is 40 kg maximum, • 4nos. of adjustable full shelf, • box file a4 size ( 85wx345hx285d ) can be stored vertically on three shelves and the clear space above fourth shelf is 240mm, • m10 screw type leveler with hex plastic base, finish • epoxy powder coated to the thickness of 50 microns ( + 10 ) . 56 dual desk is specially designed for rugged use with overall dimentions of l1054 x w980 x h760 mm and all edges are fillet. the desk is made of pressed formed ms crca section & crca tube fitted with pre laminated particle board top, seat & back with injection molded ppcp edge. hanger for water bottle and bag. space for keeping pen, pencil and scale. the overall appearance of the product shall be as per photograph. top injection molded ppcp edge. size : 1054x450x18 mm thk. particle board. seat injection molded ppcp edge. seat height : 450 mm , seat size : 1054x304x18 mm thk. particle board. back injection molded ppcp edge. back size : 1054x154x18 mm thk. particle board. shelf shelf 0.8 mm thk. crca sheet. bullnose front edge with stiffner 1 mm thk crca. modesty modesty 0.8 mm thk. crca sheet. slot perforated. tie members horizontal tie members 25x25x1.2 mm thk. crca pipe. footrest footrest pressed formed crca section 1.5 mm thk. side frame side frame c section pressed formed 1 mm thk.crca sheet welded with 25x50x1.2 mm thk tube. and back rest pipe ø25 x 1.2 mm thk. top end rounded. cap & levellers all pipe caps are curved ppcp material. finish all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. 57 item deleted vide e.n.c bcd, patna letter no 6010 ( bh ) anu dated 11.10.2021 58 item deleted vide e.n.c bcd, patna letter no 6010 ( bh ) anu dated 11.10.2021 59 hostel bed made out of steel with overall size length 1994mm, width 907mm, height 822 / 623 / rest height 450mm, structure of metal bed frame including legs and head structure mild steel pipe, head board shape of headboard semi circular, thickness of hollow section in structure ( 1.2mm ) , support panel for placement of mattresses mild steel hollow box rectangular section, thickness of support panel ( in 1.2mm ) , material of head board mild steel erw tube is:7138 square tube of 38.1 mm x 1.2 mm thick, material of mattress panel ms perforated / sheet, thickness of mattress panel 1.2 ( mm ) , size of support members in mm ( ±5 mm ) 50 x 50mm, number of support members is 04 nos., paint / finish of all m s parts powder coating 60 micron. 60 dining table of 8 seater with wire manager of size 2400w * 1200d * 750h h top all tops are made from 25mm thick pre—laminated board with 2mm thick. pvc edge beading side panel all side panels are made from 25mm thick pre—laminated twin with 2mm thick pvc lipping of same color on sides and 0.8mm pvc lipping of matching color on the bottom curve, modesty these panels are made from 18mm thick pre laminated board with 0.8mm pvc lipping of matching color, access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical / data voice. sockets from top, powder coated switch mounting tray made from 0.8mm and 1.2mm m.s sheet. switches to be mounted on tray as per requirement. provision for mounting 8 — module anchor roma switch plate on switch mounting tray. wire manager rehau made from rau pvc 1309 / 7558 ( black color ) . 61 item deleted vide e.n.c bcd, patna letter no 6010 ( bh ) anu dated 11.10.2021 62 study chair is made of blow molded high density polyethylene andis fixed on the understructure assembly with the help of stainless steel pop rivets.seat: seat is made of blow molded high density polyethylene and is fixed on the understructure assembly.understructure all side metal frames and cross connectors are made from mild steel erw tubes , 40 x 20 x 2mm thk ( approx. 14 swg ) as per 1s:7138 which are welded togetherthe welded structures and cross connectors are coated with min 45 micron thickness of epoxy polyester coating. bag storage tray made of 04 mild steel rod ( as per 15:432 ) forms a cage at the bottom and is welded to the main understructure. seat support channel made of 1mm thk mild steel sheet ( as per is:513 ) is welded to the understructure for fixing seat. plastic caps plastic caps made of polypropylene are provided on the foot rest side tubes and back leg tubes adding more aestheic value to the product. 63 steel rack of size 6x36x18 with six shelves prime quality crc sheet conforming to is 513d / 10748 / 5986. the pitches of the slots at 19.05 mm, panel / shelves: 6 bnd bending process of 905l x 448d of load capacity 80 kgs. udl max per shelf. shelf material 0.8 mm thick ms sheet conforming to commercial quality cr 1, grade 340 of is 513, angle posts material and size rolled steel angle posts of 40 x 40 x 1.8 mm, m s sheet thickness of shelves and back ( minimum ) in mm 0.8, paint powder coated with lead free paint. 64 study table with all sides metal frames and cross connectors are made from mild steel erw tubes , 40 x 20 x 2mm thk ( approx. 14 swg ) as per 15:7138 which are welded together.the welded structures and cross connectors are coated with min 45 micron thickness of epoxy polyester coating. shelf tray and desktop mounting brackets made of 2mm thk mild steel sheet ( as per 15:513 ) are welded to the understructure for fixing shelf tray and desktop respectively. hooks are provided ori the vertical side frames on both sides of the desk for hanging bags / bottles. they are made from 09 mild steel rod ( as per 15:432 ) and are welded to the main understructure plastic caps: plastic caps made of polypropylene are provided on the foot rest side tubes and front leg tubes adding more aestheic value to the product. 65 office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side one drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock....

Building Construction Department - Bihar

31130247 repair and painting work of nic building roof treatment of nsc office building and fixing of aluminium frame, jali, glass, painting of different office collectriate office building district emergency operation centre building....

Building Construction Department - Bihar

31104014 repair and painting work of n.i.c. building roof treatment of n.s.c. office building and fixing of aluminum frame jali, glass, painting of different office collectriare office building district emergency operation centre building and district disaster branch of office building at chapra....

Building Construction Department - Bihar

31015414 supply of furniture and other items for govt. engineering college, arwal. ot d office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side one drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock. 2ss 2 seater sofa overall size 1130w x 700d x 785 h cm, seat height 43.5 cm side frame assembly: the side frame assembly is fitted to the two ends of the connecting beam assembly to form, the leg cum armrest assembly. it is made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick ms e.r.w. tube and powder coated ( dft 40 60 microns ) . the ends are fitted with abs moulded end caps, 3. seatrest assembly:the seat rest assembly consists of a fabricated inner frame assembly insitu moulded high resilience ( hr ) polyurethane foam having density = 45 + / 2 kg / m3 with hardness load 25 ± 2 kgf as per is:7888 for 25% compression of the foam. the complete moulded seat rest assembly is covered with a replaceable fabric upholstery cover *seat size: 52.0cm. ( w ) x 50.0cm. ( d ) x 6.0cm. ( t ) , 4. backrest assembly:the backrest assembly is flexing type and consists of a fabricated inner frame assembly insitu moulded with high resilience ( hr ) polyurethane foam having density = 45 +1 2 kg / m3 with hardness load 14 ± 2 kgf as per is:7888 for 25% compression of the foam. the complete moulded backrest assembly is covered with a replaceable fabric upholstery cover. *back size: 52.0cm. ( w ) x 59.0cm. ( h ) x 6.0cm. ( t ) , 5. adj. glides: the adj glide is injection moulded in black nylon & fitted to the front end of side frame assembly along with abs moulded adj. glide base to take care or unleveled floor surface 3ss 3 seater sofa the side frame assembly made of 38mm dia 2mm thick is fitted to the two ends of the connecting beam assembly to form the leg cum armrest assembly. it is made of a ms. e.r.w. tube duly powder coated. the ends are fitted with abs moulded end caps. tie member: it is the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members are used to connect the side frames. the tie member is made of ms. e.r.w. tube 40mmx40mm 2mm thick duly powder coated. the seat / back assemblies are mounted on the tie member. l bracket of 6mm thick steel connects the back to the tie member assembly. seat foam is of 45 + / 5 kg / m3 and back foam is of 32 + / 5 kg / m3 with hardness of 25+ / 2 on hampden m / c. at 25% compression of the foam. seat size 52cm widex50cm deep and back size 52 cm wide and 60cm high. back of the sofa flexes for additional comfort 1 seater –601mmwx700mmdx 810mmh, 3 seater –1640w x 700d x 785 h cm 3s wc 3 seater steel chair cross beammade of ms erw rectangular black powder coated tube of 80 x 40 x 2 mm leg & arm rest chrome plated made of cold rolled steel. arm rest & leg assembled to the cross beam with m10 x 100 mm bolts. seat & back 1.6mm thick powder coated perforated shell of cold rolled ms sheet. side bar of chrome plated solid steel 30 x 12 mm ( din 174 ) with flunting & plastic insert .the shell is assembled on the cross beam with help of m8 bolts the overall dimension is 1608mm ( l ) x 695mm ( h ) x 555mm ( d ) , seat height : 405mm wb a work bench of size 4’ x 3’, angle 1.5 x 1.5 with 2 pair of legs with work top with overall dimensions. 1200mm l x 900mm d x 950mm h, the worktop of mdf ext garde is12406 wood. max udl 1500kgs the worktop should be made of various layers of beech wood which are planed, glued and pressed together. this should make the work top non deformable, and load and wear resistant. this shall be covered with 4mm steel sheet. leg: the bench leg should be powder coated should be 80mm l x 1265mm d x 960mm h. back bracing for stability cnt centre table of size 1200w x 600d x 378h built with the extremely durable rubberwood, the table can hold weight up to 25kgs. with a very suitable cappuccino color, the table will complement any style of décor. the tapered legs provide stable support. it’s free of flaws design can accommodate your books, magazines, laptop and coffee mugs, all at once. the well thought out dimensions of the table make it easier to position it anywhere in the house wb b work bench of size 8’ x 4’ with 2 pair of legs with work top with overall dimensions. 2400mm l x 1200mm d x 950mm h, the worktop of mdf ext garde is12406 wood. max udl 1500kgs made of various layers of beech wood which are planed, glued and pressed together. this should make the work top non deformable, and load and wear resistant. bench leg: the bench leg should be powder coated should be 80mm l x 1265mm d x 960mm h. back bracing for stability ec cu executive chair with cushioned seat is made of injection molded plastic outer & inner. plastic inner is upholstered with stitched cover and moulded high resilience polyurethane foam of density 4542 kg / m*, and hardness load 16 + 2 kgf as per 15:7888 for 25% compression.the stitched cover is made from spacer fabric and leatherette seat size : 47.0 cm. ( w ) x 48.0 cm. ( d ) , tunular frame : the powder coated ( dft 40 60 micron ) tubular frame is cantilever type & made of 02.5440.03 cm x 0.240.016 cm thk ms erw tube.the back connected to frame through powder coated ( dft 40 60 micron ) high pressure die cast connector. oc a office chair with seat and back are made from seasoned wood and plywood. the same is upholstered with black synthetic leather and polyurethane foam. back size 46.0cm ( w ) x27.0cm ( h ) . seat size 46.0cm ( w ) x40.0cm ( h ) . the armrest is gas assisted injection moulded from black polypropylene. the understructure assembly is a cantilever type frame.width of the chair 58cm, depth 56.5cm, height 87.5cm, seat height 48cm. oc b office chair : the seat and back are made up of 1.2 ±0.1cm. thick hot pressed plywood measured as per qa method described in ocp qlta p14 18 and upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam is designed with contoured lumbar support for extra comfort. back size 49.0 cm. ( w ) x 47.0 cm. ( h ) , seat size 49.0 cm. ( w ) x 44.0 cm. ( id ) high resilience ( hr ) polyurethane foam: the hr polyurethane foam is moulded with density = 45 ±2 kg / m3 and hardness load 16 ± 2 kgf as per is:7888 for 25% compression. pc principal chair: the seat is made up of 1.4± 0.1 chick hot press 4 plywood upholstered with fabric and moulded polyurethane foam. it has a seat depth adjustment of 5.0±0.3 cm integrated in the seat through a sliding mechanism. seat size: 50.0cm ( w ) x 49.0cm ( d ) .the back is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustable lumbar support made of injection moulded polypropylene having an adjustment of 6.0±0.1cm.backsize: 50.0cm ( w ) x68.0 cm ( h ) .the polyurethane foam for seat is of density 55± 5kg / m3. it is made of glass filled polyamide arm structure with pu arm top and height adjustment of 7.0 ±0.5cm.the arm top has swivel and to for movements. to for movement is 6.0± 0.5cm.the inner tube of armrest is chrome plated. the mechanism is designed with the following features:• 360° revolving type.• centre tilt synchro• 3 position ( including upright lock ) giving option of variable tilt angle to the chair with anti shock feature. the headrest is injection moulded din glass filled polypropylene which is upholstered with foam and fabric has an adjustment of 6.0± 0.1cm & its assembled over the full back chair. the pneumatic height adjustment is chrome plated with an adjustment stroke of 9.0 ± 0.3cm.the pedestal is high pressure die cast polished aluminum and fitted with 5 nos. twin wheel castors. the pedestal is 65.0±0.5 cm p.c.d. the twin wheel castors are injection moulded in black glass filled polyamide having 6.0±0.1cm wheel diameter. the chrome plated tubular frame is made of día2.8±0.03cm x0.2±0.02 cm the m.s. round tube. the frame is fitted with plastic caps made of injection moulded glass filled polypropylene. 75 ( w ) * 75 ( d ) * 115 130 ( h ) * 44.5 53.5 ( sh ) . cc wa computer chair with seat and back are made uo injection moulded high impact strenght polypropylene polymer compound with indoor graade uv resistance.the tubular weled frame is made from dia2.22 + / 0.03cmx 0.12+ / 0.0128 cm and 3.5+ / 0.03 cm x 0.12+ / 0.0128 am stainless steel 202 grade tube.the tube are buff polished to give shiny finish. cm. the shoes are made of high impact strenght polypropylene polymer. compond with indoor grad uv resistance and pressed fitted with tubularfram. size : ( w ) 52.5cm* ( d ) 55.8cm* ( h ) 84.5cm* ( seat h ) 45.0 cmseat size 52.5cm ( w ) *53.2 cm ( d ) back size 51.6 cm ( w ) *40.5 cm ( h ) . oc c office chair mid back pneumatic height adjustment cushioned revolving chair made up of 1.2cm thick hot pressed ply wood seat & back upholstered with fabric with moulded polyurethane foam together with moulded abs seat & back integral skin polyurethane with reinforced with m.s. insert. the tilt mechanism adjustment upright locking, 360 degree revolving type fitted with 05 nos. twin wheel castor dia 5 cm. comr compactor on 12 feet rail length moves on rails. the cabinet body rigid knock down construction made of 0.8 thick crca steel eonforming to is: 513 gld. body units are bolted to undercarriage. optimizer height from ground is 2081 ] mm ( 1930 hody+ 65 under 35 channel systems ] finish: — the bodies inciuding shelves are given anti rust surface treatment 8‘ are powder coated with epoxy polyester powder oven backed with a controlled temperature of 130 deg. to 200 deg. c.sheif:l made of 0.8 thick crca steel conforming to is;513 gd. max load bearing capacin is fit! kg. udl per ahett x 5:400 kg. eauh cabinet. undercarriage: the undercarriage is a welded trams made of hr sheet 3.15 mm thick conforming [ 0 is; 1d?48movement of the system: push pull configuration { type p utype f~2 } movement of units achieved pushing or putting chrome plated 0 handle fitted suitable height on one side at body. cnft conference table of 30 seater capacity shall be an eco modular conference table enables various configurations to suit different conference rooms. it is made of particle board and has wire management facilities for uncluttered wiring. it has profiled legs with twin colored modesty for better looks, double 1350.0wx 600.0dx 750.0h, work surface top thickness is 25mm plb with pvc beading allover, legs modesty wire manager made from 18mm thick plt having curved profile.made from plt ( prelaminated twin ) boards 18mm thick in two shades. a wire manager running along the width of desk fitted on the modesty panel from inside. cort corner table of size 530w x 450d x 450h built with the extremely durable rubberwood, with a very suitable cappuccino color, the table will complement any style of décor. the tapered legs provide stable support. it’s free of flaws design can accommodate your books, magazines, laptop and coffee mugs, all at once. the well thought out dimensions of the table make it easier to position it anywhere in the house. dt a ss canteen table with s.s top 8 seated with foldable stool size : l 2130 mmx d 915 mmx ht 750mm: under structure made of prime quality cold rolled close annealed square tube 30mm x 30mm x 1.2mm thick. with 8 nos. folding / tilting stools 4 on each side. stools fitted on specially designed c clamps over leg rest on each side with bush for smooth functioning. top 1.0mm thick, stainless steel properly bent & edge formed, supported with 12mm ply / plpb below the top. the stool top is made up of 1.0mm thick. stainless steel dia 30mm, supported on 12mm ply / plpb fitted with csk screw on 25mm x 3mm thick. ms flat welded on stool frame. all steel components are epoxy powder coated followed by seven tanks of anti corrosion treatment of the surface. fct file cabinet with 4 drawer width: 470mm, height: 1320mm, depth: 620mm , rigid knockdown construction, material: top, side & drawer frontmade from0.7mm thk **crca, drawer inside cover, side back side made from0.6mmthk **crca, back, bottom, drawer bottommade from 0.5mmthk **crca, **crcasteel confirming to is 513, grade d, label holder snap on type plastic label holder on drawer fronts, locking & anti tipping arrangement centralized lockingwith camlock& having antitipping arrangement to ensure that when one , drawer is opened for use, it does not allow other drawers to be opened, finish epoxy polyester powder coated to the thickness of 50 microns ( + / 10 ) . fp cbnt fire proof cabinet shall be designed to protect the contents ( paper media documents ) against the fire hazard.shell: the external shell of the cabinet shall be of steel of minimum 2 mm thick and internal shell of steel of 1.6 mm thick, both conforming to is 513. further fortified by suitable in situ insulating fire resistant barriers to meet the required protection. the overall protection to the contents shall be minimum 70 mm on all six sides. door: the external door of the cabinet shall be of steel of minimum 2 mm thick conforming is 513 and further fortified with hard plate over the lock for burglary protection and in situ insulating fire resistant barrier material to meet required fire protection.  bolt work: the door shall be secured by four way locking mechanism / bolt work with minimum 8 moving shooting bolts of 20 mm diameter. door & body fitment: the door fits in the cabinet having tongue and groove construction that stops hot gases and high temperature to pass through and withstand temperature up to 1010 deg.c. locking: the frrc shall be equipped with a dual control high precision key lock of minimum six levers. the lock body shall be of zinc alloy and the levers in the lock shall be of brass conforming to is 410. there shall not be any dummy lever in the lock. the storage capacity shall be minimum 650 liters with minimum usable internal sizes in mm as 1620 ( h ) x 670 ( w ) x 599 ( d ) .the cabinet shall be provided with minimum four nos. adjustable shelves. oc d office chair with seat / back assembly: the cushioned seat assembly consists of seat base moulded in glass filled poly amide, moulded polyurethane foam & upholstered with high stretch knitted polyester fabric. the cushioned back assembly consists of back inner moulded in polypropylene in situ moulded with polyurethane foam & upholstered with high stretch knitted polyester fabric. back size : 45.5 cm. ( / 1 / ) x 53.0 cm. ( h ) seat size : 48.5 cm. ( w ) x 49.0 cm. ( d ) high resilience ( hr ) polyurethane foam: the hr polyurethane foam used in seat and back cushion is moulded in density min 48 kg / m3, and hardness load 15 ± 2 kgf as per is:7888 for 25% compression. tilt mechanism, spines & spine connector: the seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. the cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. the s shaped spines moulded in high strength glass filled poly amide and the spine connector moulded in glass filled poly amide form the back spine structure involved in multi dimensional recline motion. the variable tilt angle recline motion can be adjusted with 3 position tilt limit feature which should be inbuilt in seat base and the tension ( return force ) should be user weight dependent. adjustable armrests: the assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled poly amide: the height adjustment feature should be button operated having adjustment of 6.6±0.5cm. the armrest top should be made up of integral skin pu moulded over plastic inner moulded in glass filled poly amide. pneumatic height adjustment: the seating height can be adjusted with a pneumatic gas lift having an adjustment stroke of 9.2 ± 0.3 cm pedestal assembly: the pedestal should be injection moulded in glass filled poly amide and fitted with 5 nos. twin wheel castors. the pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors twin wheel castors :5 nos. twin wheel castos are injection moulded in poly amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal. ht hod table of size 1500 x 750 x 743 understructure: the understructure is in prelam panels, made with plt boards.drawer storage units with different combinations to support tops, made with 18mmplt boards of different colours. modesty and back panels, made with 18mm plt boards. the pedestals / storages are fitted with necessary locks plt board tops ( straight edges ) : wenge and savannah maple plt board used for making tops. pvc membrane tops ( with profiles ) : jdb job display board with dimensions ( 1200x900x150 ) mm board having 9 mm ply tdb tool display board ( 1200x900x150 ) mm board having 9 mm ply lt chem chemistry lab table of size 4130mm x 1540mm x 900mm with pp drop sink of size 560 x 355, single tap deck mounted 8 swing goose neck, ss peg board 550x420x55 with 25 pegs. two reagent shelves of width 1050 with glass shelf. c frames all cframes assemblies should be manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 ( indian standard specification for steel tubes for furniture ) and all sheet metal components should be of crca confirming to is code 513:1994. the suspended under bench welded units should be supported on heavy duty steel frames fully carrying the load of worktops. c frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. the c frame shall also have skirting at back bottom side. horizontal members should be made from rectangular pipes of 2mm thickness. lt n lab table of size 4130mm x 1540mm x 900mm frames all cframes assemblies should be manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 ( indian standard specification for steel tubes for furniture ) and all sheet metal components should be of crca confirming to is code 513:1994. the suspended under bench welded units should be supported on heavy duty steel frames fully carrying the load of worktops. c frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. the c frame shall also have skirting at back bottom side. horizontal members should be made from rectangular pipes of 2mm thickness. cross sectional dimensions of the pipe should be 60 x 30 x 2 mm. lu 4d locker unit with 4 door plu + lkr ( base ) with stand size 1830hx380wx450d, stackibilit the add on units can be stacked width wise to formbank of lockers having common side panel, locking cam lock with lock leveroption of hasp arrangement, material crca 0.6mmthickness, rigid knockdown construction, shelf uniformly distributed load capacity per each shelf level is 35 kg maximum, hat self 4 door model at the top, finish epoxy polyester powder coated to the thickness of 50 microns ( + / 10 ) .ventilation attractive punched pattern for ventilation lt b long table of size 1800 x 900 x 740 worktop 25 mm thick plb tops with 2mm thick pvc edge beading understructure c – frames legs 1.6 mm thick m.s c­frame supporting the top. legs dia. 38.1 x 1.6 mm thick m.s erw tube. dt b meeting table with 10 seater with wire manager of size 2400w * 1200d * 750h h top all tops are made from 25mm thick pre—laminated board with 2mm thick. pvc edge beading side panel all side panels are made from 25mm thick pre—laminated twin with 2mm thick pvc lipping of same color on sides and 0.8mm pvc lipping of matching color on the bottom curve, modesty these panels are made from 18mm thick pre laminated board with 0.8mm pvc lipping of matching color, access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical / data voice. sockets from top, powder coated switch mounting tray made from 0.8mm and 1.2mm m.s sheet. switches to be mounted on tray as per requirement. provision for mounting 8 — module anchor roma switch plate on switch mounting tray. wire manager rehau made from rau pvc 1309 / 7558 ( black color ) nb notice board with size 4 x 3 surface material woolen felt / fabric in various colours, core material 9 mm thick soft board, backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour or 0.16 to 0.25 mm thick isi mark gp sheet, aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness rt da reception table double arch with dl top of size 2410 x 1065 x 725 worksurface, 1035 counter, d l top top clean matt pu finish 18mm thick inside radius 700.0 mm outside radius – 1350.0 mm depth – 650 mm glass frosted glass 10mm thick diamond cut finishing on edges inside radius – 1202.5mm outside radius – 1402.5mm depth – 200mm, modesty panel ms perforated sheet below worksurface : 0.8 mm ( thick ) x 665.0 mm ( height ) x 1345.0 mm ( flat length ) above worksurface : 0.8mm ( thick ) x 260 mm ( height ) x 1345.0 mm ( flat length ) , legs ms tube 1.6 mm thick diameter 50.8 mm height 604 mm. wb s non magnetic small white board 4 x 3 surface material 0.62 to 0.72 mm thick laminate sheet with extra melamine surface, core material 8 mm thick particle board, backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour, aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness. s al steel almirah of size 1981 x 916 x 486 mm multi bend construction and inter locking design and full length over apping doors and sides. three way bolting mechanism. spot welding & co2 welding. anticorrosion treated components, oven baked powder coating process. material thickness 0.9mm.top, bottom, lh & rh sides and back material thickness= 0.9mm, removable rh & lh main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm sr a steel rack of size 6x36x18 with six shelves prime quality crc sheet conforming to is 513d / 10748 / 5986. the pitches of the slots at 19.05 mm, panel / shelves: 6 bnd bending process of 905l x 448d of load capacity 80 kgs. udl max per shelf. shelf material 0.8 mm thick ms sheet conforming to commercial quality cr 1, grade 340 of is 513, angle posts material and size rolled steel angle posts of 40 x 40 x 1.8 mm, m s sheet thickness of shelves and back ( minimum ) in mm 0.8, paint powder coated with lead free paint. ls lab stool of circular type 30.0 + / 0.5 cm and made up of 0.1+ / 0.012 cm thk cr steel. it is welded to the understructure and black powder coated ( dft 40 60 microns ) . understructure assembly: the understructure is made of ms tube 2.2 + / 0.03 cm x 0.16+ / 0.0128 cm thk ms erw tube. lt is welded ti the ms fabricated circular seat assembly and black powder coated ( dft 40 60 microns ) . the understructure is provided with black pp injection moulded ferrules. sr b steel rack of size 2 6x36x18 with three shelves prime quality crc sheet conforming to is 513d / 10748 / 5986. the pitches of the slots at 19.05 mm, panel / shelves: 6 bnd bending process of 905l x 448d of load capacity 80 kgs. udl max per shelf. shelf material 0.8 mm thick ms sheet conforming to commercial quality cr 1, grade 340 of is 513, angle posts material and size rolled steel angle posts of 40 x 40 x 1.8 mm, m s sheet thickness of shelves and back ( minimum ) in mm 0.8, paint powder coated with lead free paint. ot a office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side three drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock. ct computer table of size 600w x 450d x 750h mm compact and easy to use . top made up of 1.5 cm medium density fiber. all the other panels are made of particle board. vacuum lamination of pvc has been done on the table to surface. 0.4mm lapping is used for all the other panels ot b office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18 mm thick pre laminated top size 1365 x 680 x 735 ( approx. ) with both side drawer unit one side three drawers & another side two drawers made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with both side drawer lock pt principal table main desk of size 1800 x 900 x 740, eru of size 1550 x 450 x 705 made up of top 25 mm thick plain particle board ( ppb ) clad with 0.6mm thick post formed laminate and 1mm thick backing laminate ( bdl ) . flat edge duly sealed with 2mm thick pvc beading., modesty 18mm thick plain particle board ( ppb ) clad with 1.0mm thick decorative laminate ( dl ) on both sides. edge sealed with 2mm thick pvc beading with 01 no. 3 drawers free standing pedestal. ot c office table with eru & pedestal of size 1350 x 750 x 750 mm + eru + pedestel main desk of size 1350 x 750 x 750 with eru of size 1200 x 450 x 750 & 01 no. 3 drawers pedestal: top panel made from 25 ±0.5 mm thk pre laminated boards as per is 12823 with 2 mm thick pvc beading on all sides. side panel the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm pvc beading on all sides. modestty 1 & 2 the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm thick pvc beading on all edges. the panel is made from 25 ±0.5 mm thk pre laminated boards as per is 12823 with 2 mm thick pvc beading on all sides, the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm pvc beading on all sides. the panel is made from 18 ±0, 5 mm thk pre laminated boards as per is 12823 with 0.8 mm thick pvc beading on all edges. pedestal wooden panel ( 1 box+ 1 filling ) back wooden panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with pvc beading on all sides. the panel is made from 9 ±0.5 mm thk pre laminated board. sstp steel table with stainless steel top of size 1180 x 750 x 750. worktop the top is in stainless steel brushed finish with plb insert for durability. easy to clean and maintain hygiene. side frames made from 30mm x 30mm x 1.5mm thick m.s powder coated tubes at base which are welded and are fixed to top with screws. the bottom ends are closed with plastic buffers. ms shade : s / g metallic dark grey ( nerocoat 9000626 ) , cross member made from 30mm x 30mm x 1.5mm thick m.s powder coated tube, which is welded and bolted to side frames. tp a teaching platform with the dimensions of length 6 ft x breadth 4 ft x height 1.5 ft with 19 mm plywood on top, shall be rectangular hallow box shape without legs. tp b teaching platform with the dimensions of length 12 ft x breadth 6 ft x height 1.5 ft with 19 mm plywood on top, shall be rectangular hallow box shape without legs. pod wooden podium with dimensions: 45 h x 20 w x 15 d to 50 h x 25 w x 20 d presenter side height: 40 to 45 shelves: 20 h x 20 w x 10 d to 25 h x 25 w x 12 d product weight: 50 to 55 lbs. shipping weight: 65 to 70 lbs. material: scratch resistant high pressure laminate. the top of the table shall be provided 19 mm ost. the table shall be neatly finished and polished. smchr seminar chair with understructures could be revolving or fixed type as per need. option of hinge type and retractable desk let. desklet 100% voc free powder coating knock down design reducing transportation emissions designed for long life ot e office table of size 900 x 590 x 750 made of ms erw square tube 18 mm x 25mm x 1.2mm thick with pre laminated top size 1199 x 590 x 750 mm thick with single side one drawers, drawer unit made of .5mm thick ms crca sheet, all steel components have powder coated paint wb l non magnetic long white board 8 x 4 size and surface material 0.62 to 0.72 mm thick laminate sheet with extra melamine surface, core material 8 mm thick particle board, backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour, aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness. bkrk a double sided book rack with the dimensions width 900mm, height: 1850mm, depth: 600mm, rigid knockdown construction. construction, material crca0.8mmthickness, finish epoxypolyester powder coated to the thickness of 50 microns ( + / 10 ) .number of adjustable shelf: five adjustable shelves on one side ( total 12 loading levels ) . uniformlydistributed load capacity per each shelf is 80 kgmaximum. label holder & range indicator label holder & range indicator on eachmain unit for inserting labels. bkrk b single sided book rack with the dimensions width 900mm, height: 1850mm, depth: 316mm, rigid knockdown construction, material crca 0.8 mm thickness, finish: epoxypolyester powder coated to the thickness of 50 microns ( + / 10 ) ., number of adjustable shelf five adjustable shelves. ( total 6 loading levels ) . uniformlydistributed load capacity per each shelf is 80 kg maximum, label holder & range indicator label holder & range indicator on eachmain unit for inserting labels. m r magazine rack with overall dimensions of all steel periodical display rack shall be 900mm ( w ) x450mm ( d ) x1830mm ( h ) . rigid knockdown construction , panels shall be made from crca 0.6 mm thick and front frame shall be made from crca 0.8 mm thick . crca d grade as per is 513 . there shall be 5 level racks , display tray shall be suitable for fullscape size magazines, periodicals, aesthetically appealing metal tray at an angle for easy viewing . receding facility to access the storage behind . sliding on plastic rollers . behind storage shelving each of 5 level has a behind storage shelf . uniformly distributed load capacity per each shelf is 40 kg . leveler shall be screw type with hex plastic base and finish shall be epoxy polyester powder coated to the thickness of 50 microns. glsd almirah with glass door size 916mm ( w ) x 486mm ( d ) x 1980mm # ( h ) # excluding leveler, construction & material • welded construction, • 0.7mm thk ( ±0.07mm ) crca* for shelf, • 0.8mm thk ( ±0.08mm ) high yield strength crca** for doors and back, • 0.9mm thk ( ±0.08mm ) crca* for all other components, crca ‘d’ grade as per is:513, crca ‘d’ grade high yield strength as per is:513, locking & handle • brass handle with • two way locking mechanism with shooting bolt, shelves • height wise adjustable shelf mounting • uniformly distributed load capacity per each full shelf is 40 kg maximum, • 4nos. of adjustable full shelf, • box file a4 size ( 85wx345hx285d ) can be stored vertically on three shelves and the clear space above fourth shelf is 240mm, • m10 screw type leveler with hex plastic base, finish • epoxy powder coated to the thickness of 50 microns ( + 10 ) . dd dual desk is specially designed for rugged use with overall dimentions of l1054 x w980 x h760 mm and all edges are fillet. the desk is made of pressed formed ms crca section & crca tube fitted with pre laminated particle board top, seat & back with injection molded ppcp edge. hanger for water bottle and bag. space for keeping pen, pencil and scale. the overall appearance of the product shall be as per photograph. top injection molded ppcp edge. size : 1054x450x18 mm thk. particle board. seat injection molded ppcp edge. seat height : 450 mm , seat size : 1054x304x18 mm thk. particle board. back injection molded ppcp edge. back size : 1054x154x18 mm thk. particle board. shelf shelf 0.8 mm thk. crca sheet. bullnose front edge with stiffner 1 mm thk crca. modesty modesty 0.8 mm thk. crca sheet. slot perforated. tie members horizontal tie members 25x25x1.2 mm thk. crca pipe. footrest footrest pressed formed crca section 1.5 mm thk. side frame side frame c section pressed formed 1 mm thk.crca sheet welded with 25x50x1.2 mm thk tube. and back rest pipe ø25 x 1.2 mm thk. top end rounded. cap & levellers all pipe caps are curved ppcp material. finish all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. drs t dressing table of size 460w x 486d x 1710h mm , mirror w x h: 362 mm x 1156 mm dressing table comes with a long mirror, two storage drawers, and a stool. available in wenge color, the dresser is crafted from good quality mdf wood, making it sturdy and lasting. the shelves of this stylish dressing table can be used to keep items like perfume bottles, hair products, and medicines, for that clutter free look. the stool, also wenge color with an orange colored cushion, offers comfortable seating, while the full length mirror is perfect to dress up, and check your overall ensemble. s al m steel almirah with mirror of size 900w x 507d x 1950h mm rafted from prime steel, your slimline cupboard will be resistant to corrosion and peststhis cupboard comes with 2 easily adjustable shelvesthe hanging rod inside the cupboard ensures ample space for your daily wear, suits, sarees and / or dressesknock down construction makes shifting and handling of slimline easieravailable with over head unit option to maximize vertical space usage you can also choose to have a mirror with slimlinestylish snap shut flush handle enhances slimline’s aesthetics. audi c auditorium chair seat / back assembly: the seat and back are made up of 1.2±0.1 cm. thick hot pressed plywood measured as per qa method described in ocp qlta p14 18 and upholstered with fabric and moulded polyurethane foam. the back is, flexing type.back size 47.0 cm. ( w ) x 51.0 cm. ( h ) , seat size 47.0 cm. ( w ) x 47.0 cm. ( d ) . 2. high resilience ( hr ) polyurethane foam: the hr polyurethane foam is moulded with density = 45±2 kg / m3 and hardness load 16 ± 2 kgf as per is:7888 for 25% compression.3. armrests :the one piece armrests are made of black integral skin polyurethane foam with 50 70 shore hardness and reinforced with m.s. insert. the armrests are scratch and weather resistant.5. understructure assembly: it is made of dia. 2.54±0.03cm. x 0.2±0.016cm. thk. m.s.e.r.w. tube with connecting strips made of 0.5 ± 0.05 cm. thk. hr steel welded to it for holding the seat. the assembly is powder coated ( dft 40 60 microns ) .the auditorium chair is designed to get mounted / grouted on floors with flooring specification as per engineer in charge.overall width 57.0, depth 57.0, height 86.0, seat height 44.0 cm. ss mc movable chair made out of stainless steel, understructure seat and back are made up of injection moulded high impact strength polypropylene polymer compound with indoor grade uv resistance *seat size: 52.5 cm. ( w ) x 53.2 cm. ( d ) , * back size : 51.6 cm. ( w ) x 40.5 cm. ( h ) .s.s. understructure: the tubular welded frame is made from dia 2.22 ± 0.03 cm x o.12 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.12 ± 0.0128 cm stainless steel 202 grade tube. the tubes are buff polished to give shiny finish. bd hostel bed made out of steel with overall size length 1994mm, width 907mm, height 822 / 623 / rest height 450mm, structure of metal bed frame including legs and head structure mild steel pipe, head board shape of headboard semi circular, thickness of hollow section in structure ( 1.2mm ) , support panel for placement of mattresses mild steel hollow box rectangular section, thickness of support panel ( in 1.2mm ) , material of head board mild steel erw tube is:7138 square tube of 38.1 mm x 1.2 mm thick, material of mattress panel ms perforated / sheet, thickness of mattress panel 1.2 ( mm ) , size of support members in mm ( ±5 mm ) 50 x 50mm, number of support members is 04 nos., paint / finish of all m s parts powder coating 60 micron. oc a office chair with seat and back are made from seasoned wood and plywood. the same is upholstered with black synthetic leather and polyurethane foam. back size 46.0cm ( w ) x27.0cm ( h ) . seat size 46.0cm ( w ) x40.0cm ( h ) . the armrest is gas assisted injection moulded from black polypropylene. the understructure assembly is a cantilever type frame.width of the chair 58cm, depth 56.5cm, height 87.5cm, seat height 48cm. sc study chair is made of blow molded high density polyethylene andis fixed on the understructure assembly with the help of stainless steel pop rivets.seat: seat is made of blow molded high density polyethylene and is fixed on the understructure assembly.understructure all side metal frames and cross connectors are made from mild steel erw tubes , 40 x 20 x 2mm thk ( approx. 14 swg ) as per 1s:7138 which are welded togetherthe welded structures and cross connectors are coated with min 45 micron thickness of epoxy polyester coating. bag storage tray made of 04 mild steel rod ( as per 15:432 ) forms a cage at the bottom and is welded to the main understructure. seat support channel made of 1mm thk mild steel sheet ( as per is:513 ) is welded to the understructure for fixing seat. plastic caps plastic caps made of polypropylene are provided on the foot rest side tubes and back leg tubes adding more aestheic value to the product. st study table with all sides metal frames and cross connectors are made from mild steel erw tubes , 40 x 20 x 2mm thk ( approx. 14 swg ) as per 15:7138 which are welded together.the welded structures and cross connectors are coated with min 45 micron thickness of epoxy polyester coating. shelf tray and desktop mounting brackets made of 2mm thk mild steel sheet ( as per 15:513 ) are welded to the understructure for fixing shelf tray and desktop respectively. hooks are provided ori the vertical side frames on both sides of the desk for hanging bags / bottles. they are made from 09 mild steel rod ( as per 15:432 ) and are welded to the main understructure plastic caps: plastic caps made of polypropylene are provided on the foot rest side tubes and front leg tubes adding more aestheic value to the product....

Employees State Insurance Corporation - Bihar

29892284 empanelment of supplier for orthopedilc implants e tender for invitation for empanelment of supplier for orthopedic implants for a period of two year , dcp plates 1.5mm ( 2 8 ) holes ss , 1.5 mm cortical screws l 6mm 20mm ss , dcp plates 2.0mm ( 2 8 ) holes ss , 2.0mm cortical screws l 6mm 20mm ss , dcp plates 2.7mm ( 2 12 ) holes ss , 2.7mm cortical screws l 6mm 20mm ss , small dcp plate 3.5mm for fore arm ( 4 10 holes ) ss , 3.5mm cortical screws l 10mm 30mm ss , narrow dcp 4.5mm plate ( 5 14 holes ) ss , 4.5mm cortical screws l 10mm 40mm ss , broad dcp plate 4.5mm ( 6 18 holes ) ss , 4.5mm cortical screws l 20mm 60mm ss , dcp plates 1.5mm ( 2 8 ) holes , titanium , 1.5 mm cortical screws l 6mm 20mm , titanium , dcp plates 2.0mm ( 2 8 ) holes, titanium , 2.0mm cortical screws l 6mm 20mm titanium , dcp plates 2.7mm ( 2 12 ) holes , titanium , 2.7mm cortical screws l 6mm 20mm titanium , small dcp plate 3.5mm for forearm ( 4 14 holes ) , titanium , cortical screw 3.5 mm , l 10 30 mm, titanium , narrow dcp 4.5mm plate ( 5 12 holes ) , titanium , cortical screw 4.5 mm , l 20 60 mm, titanium , broad dcp plate 4.5mm ( 5 14 holes ) , titanium , cortical screw 4.5 mm , l 20 60 mm, titanium , lc dcp 3.5mm, ( 4 12 ) holes , ss , 3.5mm cortical screws l 10mm 30mm ss , narrow lc dcp 4.5mm 4 holes to 16 holes, ss , 4.5mmcortical screws l 10mm 40mm, ss , broad lc dcp 4.5mm 6holes to 18 holes, ss , 4.5mm cortical screws l 20mm 60mm ss , lc dcp 3.5mm, ( 4 12 ) holes , titanium , 3.5mm cortical screws l 10mm 30mm , titanium , narrow lc dcp 4.5mm 4 holes to 16 holes, titanium , 4.5mm cortical screws l 10mm 40mm , titanium , broad lc dcp 4.5mm 6holes to 18 holes, titanium , 4.5mm cortical screws 20mm 60mm l, titanium , lcp 3.5mm, ( 4 12 ) holes, ss , 3.5 mm locking head self tapping screw , l 10mm 30mm , ss , 3.5 mm self tapping cortical screw , l 10mm 30mm , ss , lcp 3.5mm, ( 4 12 ) holes, titanium , 3.5 mm locking head self tapping screw , l 10mm 30mm , titanium , 3.5 mm self tapping cortical screw , l10mm 30mm , titanium , lcp 4.5, narrow, 4 holes to 16 holes , ss , 5 mm locking self tapping screw, l 10mm 40mm , ss , 4.5 mm self tapping cortical screw , l 10mm 40mm , ss , lcp 4.5, narrow, 4 holes to 16 holes , titanium , 5 mm locking screw, l 10mm 40mm , titanium , 4.5 mm self tapping cortical screw , l 10mm 40mm , titanium , lcp 4.5, broad, 6 18 holes , ss , 5 mm locking head self tapping screw , l 20 60 mm , ss , 4.5 mm self tapping cortical screw , l 20 60 mm, ss , lcp 4.5, broad, 6 18 holes , titanium , 5 mm locking head self tapping screw , 20 60 mm l, titanium , 4.5 mm self tapping cortical screw , l 20 60 mm , titanium , lcp 4.5 / 5, broad curved, 12 26 holes left & right for femur, ss , 5 mm locking head self tapping screw , l 20 60 mm , ss , 4.5 mm self tapping cortical screw , l 20 60 mm , ss , lcp 4.5 / 5 , broad curved, 12 26 holes left & right for femur, titanium , 5 mm locking head self tapping screw, l 20 60 mm , titanium , 4.5 mm self tapping cortical screw , l 20 60 mm , titanium , spacer for lcp ( titanium ) 3.5 mm dia , spacer for lcp ( titanium ) 4.5 / 5.0 mm dia , small t plate, right angled for distal radius 3.5mm, ( 3 6 ) holes, ss , cortical screw 3.5 mm , l 8 40 mm, ss , small t plate, oblique angled plate for distal radius, 3.5mm , ( 3 5 ) holes, ss , cortical screw 3.5 mm , l 8 40 mm, ss , distal radius volar medial column locking plate 2.4 mm, ss , distal radius dorsal t locking plate 2.4 mm, ss , distal radius dorsal locking plate 2.4 mm, ss , radial styloid locking plate 2.4 mm, ss , locking screw 1.8 mm, l 18 40 mm, ss , locking screw 2.4 mm , l 8 40 mm, ss , non locking screw 2.4 mm, l 8 40 mm, ss , cortical screw 3.5 mm with head 2.7 mm, l 8 40 mm, ss , lcp t plate 3.5mm, right angled, 3 6holes , for distal radius, titanium , lcp t plate 3.5mm, oblique angled, right / left, 3 6holes , for distal radius, titanium , 3.5 mm self tapping cortical screw, l 6 30 mm, titanium , 3.5 mm locking head screw, l 6 30 mm, titanium , lcp distal radius plate 2.4mm, straight, 5 and 6 holes, for dorsal plating, titanium , lcp distal radius l plate 2.4mm, left and right angled, shaft 3 and4, head 3 holes, for dorsal plating, titanium , lcp distal radius t plate 2.4mm, left and right angled, shaft 3 and4, head 3 holes, for dorsal plating, titanium , lcp distal radius l plate 2.4mm, oblique, left and right angled, shaft 3 and4, head 3 holes, for dorsal plating, titanium , lcp distal radius t plate 2.4mm, oblique, left and right angled, shaft 3 and4, head 3 holes, for dorsal plating, titanium , lcp distal radius plate 2.4mm, left and right , shaft 3 to 5 holes, head 5 holes, for intra articular volar fractures, titanium , lcp distal radius plate 2.4mm, extra articular, left and right , shaft 3 and 5, head 4 and 5 holes, titanium , lcp distal radius plate 2.4mm, extra long, shaft 8 to12 holes, head 4 holes, titanium , cortex screws dia 2.4mm, self tapping, l 14 40mm, titanium , locking screws 2.4 mm self tapping l 6 30mm , titanium , 3.5 mm self tapping cortical screw, l 6 30 mm, titanium , 3.5 mm locking head self tapping screw, l 6 30 mm, titanium , 34a variable angle lcp two column distal radius plate 2.4 mm, 6 7 holes in head and 2 4 holes in shaft, titanium , variable angle lcp volar rim plate 2.4 mm for distal radius with 6 holes in head 5 holes in shaft, titanium. , 2.4mm variable angle locking screws, l 10 30 mm, titanium , 2.4mm self tapping locking screws, l 10 30 mm, titanium , cortical screw 2.7 mm self tapping l 10 30 mm, titanium , locking distal ulna plate with hook , titanium , cortical screw self tapping 2 mm l 8 30 mm, titanium , locking head screw self tapping 2mm l 8 30mm, titanium , strut plates 1.5mm , titanium , t plates 1.5mm , titanium , y plate 1.5 mm, titanium , 1.5 mm cortical screw, titanium , locking t plate 2mm, titanium , locking straight plate 2.0 mm , titanium , locking condylar plate2 .0 mm , titanium , 2 mm locking cortical screw, titanium , locking t plate 2.4 mm, titanium , locking straight plate 2.4 mm , titanium , 2.4 mm cortical screw, titanium , 2.4 mm locking head screw, titanium , calcaneal plate 3.5mm, l 60mm 70mm , ss , 3.5 mm cortical screw , l 10mm 30mm , ss , locking plate for calcanium, titanium , locking screws 2.4 mm, l 10 30 mm, titanium , locking screws 2.7 mm, l 10 30 mm, titanium , locking screws 3.5 mm, l 10 40 mm, titanium , locking x plate for hallex valgus osteotomy, titanium , locking screw 2.7 mm ( head 2.4 mm ) self tapping, 10 30 mm, titanium , quarter tubular plate 2.7 mm ( 4 6 holes ) ss , 2.7 mm cortical screw, l 10 30 mm, ss , 1 / 3rd tubular plate 3.5 mm, ( 2 12 ) holes, ss , 3.5 mm cortical screw, l 10 30 mm, ss , 1 / 3rd tubular locking plate , 3.5 mm, ( 2 12 ) holes, ss , 3.5 mm locking head screw l 6 30 mm, ss , semi tubular plates 4.5mm, 2holes to 12 holes, ss , cortical screw 4.5mm, l 20 60 mm , ss , t buttress plate 4.5mm ( 4 8 ) holes, ss , l buttress plates 4.5mm, 3 8 holes, right / left leg , ss , t buttress plate 4.5mm, 3 12 holes, titanium , l buttress plate 4.5mm, 3 8 holes, right / left leg, titanium , y reconstruction plates 3.5mm , ss , reconstruction plate 3.5 mm ( 5 22 holes ) , ss , reconstruction plate 4.5 mm ( 5 22 holes ) , ss , straight pelvic reconstruction plate 3.5mm ( 5 22 ) holes, ss , lcp reconstruction plate 3.5mm, straight w / combined hole, 5 14holes, titanium , 3.5 mm self tapping cortical screw, l 20 60 mm, titanium , 3.5 mm locking head self tapping screw, l 20 60 mm, titanium , reconstruction plate 3.5 mm low profile, 6 16 holes, curved, ss , reconstruction plate 3.5 mm low profile, 3 20 holes, straight , ss , reconstruction plate 3.5 mm low profile, 10 16 holes, j shaped, ss , pelvic cortex screw 3.5 mm self tapping with head height 2.75 mm , l 40 90, ss , pelvic cortex screw 3.5 mm self tapping with head height 2.75 mm , l 90 150, ss , spring plate, 1 3 holes, length 195 mm, 315 mm, 435 mm, ss , 3.5 mm cortical screw for spring plate, l 20 40mm ss , proximal humeral locking plate 3.5mm, holes ( 4 10 ) , left & right , ss , 3.5 mm cannulated locking screw 20 60 mm, ss , 3.5 mm cannulated non locking screw 20 60 mm, ss , 3.5 mm locking screw 12 60 mm, ss , 3.5 mm cortical screw 12 60 mm, ss , proximal humeral locking plate with multi directional screw placement through same hole , holes ( 4 8 ) , titanium , cancellous screw 4.5 mm, l 20 60 mm, titanium , cannulated cancellous screw 4.5 mm, l 20 60 mm, titanium , multi directional cortical screw 4 mm , l 14 60 mm, titanium , cannulated screw 4 mm , l 14 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , periarticular proximal humerus locking plate 3.5 mm ( 2 6 hole ) left & right, titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , distal humerous locking plate 3.5 mm medial , left & right, 5 8 holes, ss , distal humerous locking plate lateral , left & right, 5 8 holes, ss , cortical screw 2.7 mm, l 10 60 mm, ss , locking head cortical screw 2.7 mm, l 10 60 mm, ss , 3.5mm cortical screws with head 2.7 mm, l 20 40 mm, ss , 3.5mm cortical screws with locking head 2.7 mm, l 20 40 mm, ss , lcp distal humerus plate 2.7 / 3.5mm dorsolateral with and without support for lateral condyle right or left, holes ( 3 14 ) , titanium , lcp distal humerus plate 2.7 / 3.5mm medial, right or left, holes ( 3 14 ) , titanium , locking screw 2.7 mm ( head 2.4 ) self tapping , l 14 60 mm, titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , locking distal humerus extra articular plate, 6 10 combi holes, ss , locking head screw 3.5 mm, l 10 60 mm, ss , cortical self tapping screw 3.5 mm, l 10 60 mm, ss , lcp distal humerus extra articular plate, 6 10 combi holes, titanium , locking head screw self tapping 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , distal medial femoral locking plate , 4.5 / 5 mm left / right, ( 6 18 holes ) , ss , locking head screw self tapping 5 mm, l 20 80 mm, ss , cancellous self tapping screw 5 mm, l 20 70 mm, ss , distal medial femoral locking plate , 4.5 / 5 mm left / right, ( 6 18 holes ) , titanium , locking head screw self tapping 5 mm, l 20 80 mm, titanium , cancellous self tapping screw 5 mm, l 20 70 mm, titanium , distal lateral femoral locking plate , 4.5 / 5 mm left / right, ( 6 18 holes ) , ss , locking head screw self tapping 5 mm, l 20 80 mm, ss , cortical self tapping screw 4.5 mm, l 20 70 mm, ss , lcp for lateral distal femur 4.5mm, 5 to 13 holes, right and left, titanium , locking head screw self tapping 5 mm, l 20 80 mm, titanium , cortical self tapping screw 4.5 mm, l 20 70 mm, titanium , 68a proximal lateral tibial locking plate 4.5 / 5 mm, left / right ( 4 14 holes ) , ss , cannulated locking screw 5.5 mm, l 20 80 mm, ss , cancellous screw 5.5 mm, l 20 70 mm, ss , cortical screw 4.5 mm self tapping, l 20 70 mm, ss , proximal lateral tibial locking plate 4.5 / 5 mm, left / right ( 4 14 holes ) , titanium , locking head screw self tapping 5 mm, l 20 80 mm, titanium , cancellous screw 6.5 mm, l 20 70 mm, titanium , cortical screw 4.5 mm self tapping, l 20 70 mm, titanium , lcp medial proximal tibial plate 3.5mm right / left shaft, 4 20mm holes, titanium , lcp lateral proximal tibia plate , 3.5mm , 4 16mm holes, right / left, titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , distal medial tibia locking plate 3.5 mm , left & right ( 5 21 holes ) , ss , locking head screw 3.5 mm, l 10 60 mm, ss , cortical self tapping screw 3.5 mm, l 10 60 mm, ss , cancellous locking screw 4 mm, ss. , lcp anterolateral distal tibia plate 3.5mm, right or left, holes ( 5 21 ) , titanium , lcp distal medial tibia plate 3.5mm medial 4 14mm holes right / left, titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , distal lateral fibular locking plate ( 4 10 holes ) titanium , locking head screw 3.5 mm, l 10 30 mm, titanium , cortical self tapping screw 3.5 mm, l 10 30 mm, titanium , metaphyseal plate 3.5mm , titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , metaphyseal plate 4.5 / 3.5 mm for metaphyseal fractures. titanium , locking head screw 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , locking head screw self tapping 5 mm, l 20 80 mm, titanium , cortical self tapping screw 4.5 mm, l 20 70 mm, titanium , angled blade plates 130 ° blade for femoral angular osteotomy, l ( 50mm 95mm ) 4 9 holes, ss , 90° osteotomy plate 4 holes, ss , condylar blade plate 95°, 5 18 holes, ss , osteotomy plate medial high tibia, 3 and 4 holes, right and left, titanium , lcp for pediatric proximal femur varus osteotomy 3.5 and 5 mm , ss , lcp for pediatric proximal femur valgus osteotomy 3.5 and 5 mm, ss , lcp for pediatric distal femur osteotomy and fractures 3.5 and 5 mm , ss , locking head screw 3.5 mm, l 10 60 mm, ss , cortical self tapping screw 3.5 mm, l 10 60 mm, ss , locking head screw self tapping 5 mm, l 20 80 mm, ss , cortical self tapping screw 4.5 mm, l 20 70 mm, ss , figure of eight ( 8 ) plate for epiphysiodesis, with two corresponding screws , ss , figure of eight ( 8 ) locking plate for epiphysiodesis with two corresponding screws , titanium , clavicle locking plate 3.5 mm, ss , locking head screw 3.5 mm, l 10 40 mm, ss , cortical self tapping screw 3.5 mm, l 10 40 mm, ss , clavicle locking plate 3.5 mm, titanium , locking head screw 3.5 mm, l 10 40 mm, titanium , cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , clavicle hook plate 3.5mm right / left 6 holes, hook l 15 to 18mm, ss , cortical screw 3.5 mm, l 10 40 mm, ss , lcp clavicular hook plate 3.5mm right and left ( 4 8 ) holes , hook 12 18mm, titanium , locking head screw 3.5 mm, l 10 40 mm, titanium , cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , variable angle locking clavicle anterior plate 3.5 mm, titanium , 3.5 mm locking variable angle screws, l 16 30mm , titanium , cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , lc lcp wrist fusion plate2.4 / 3.5, standard bend, titanium , locking head screw 2.4 mm, l 10 40 mm, titanium , cortical self tapping screw 2.4 mm, l 10 40 mm, titanium , locking head screw self tapping 3.5 mm, l 10 40 mm, titanium , cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , lc lcp wrist fusion plate2.4 / 3.5, standard bend, titanium , locking head screw 2.4 mm, l 10 40 mm, titanium , cortical self tapping screw 2.4 mm, l 10 40 mm, titanium , lcp olecranon plate 3.5mm , left / right, holes ( 2 12 ) , titanium , locking head screw self tapping 3.5 mm, l 10 40 mm, titanium , cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , lcp olecranon hook plate 3.5 mm, 2 10 holes, titanium , locking head screw self tapping 3.5 mm, l 10 40 mm, titanium , cortical self tapping screw 3.5 mm, l 10 40 mm, titanium , proximal ulnar locking plate 3.5 mm, 3 9 holes, ss , locking head screw self tapping 3.5 mm, l 10 40 mm, ss , cortical self tapping screw 3.5 mm, l 10 40 mm, ss , dhs plate 130°, 135°, 150° , barrel length 38mm ( 4 10 ) holes, ss , dhs plate 135°, barrel length 25mm ( 4 6 ) holes, ss , dhs / dcs lag screw 12.5 / 8.0mm, l 50mm 115mm, ss , dhs / dcs compression screw 4.0mm, l 36mm, ss , cortical screw 4.5 mm, l 20 70 mm, ss , dhs trochanter stabilizing plate , ss , lcp dhs plate 130°, 135°, 150° , barrel length 38mm, 2 6 holes, titanium , lcp dhs plate 135°, barrel length 25mm ( 4 6 ) holes, titanium , lcp dhs / dcs screw 12.5 / 8.0mm, l 50mm 115mm, titanium , helical blade for lc dhs , 12.5 dia, l 65 115 mm, titanium , dhs / dcs compression screw 4.0mm, l 36mm, titanium , locking device for lag dhs, 35 mm, titanium , locking cortical screw 5 mm , l 20 60 mm, titanium , self tapping cortical screw 4.5 mm , l 20 60 mm, titanium , cable plates 6 10 hole, for peri prosthetic fractures, ss , cable assembly with cerclage dia. 1.8 mm, ss , cable for plate dia . 1.8 mm, ss , cable needle assembly, dia. 1.3 mm , cortical bone screw 4.5 mm for use with cable plate , hex button 3.5 mm for use with 4.5 & 6.5 mm screw, ss , cable pin ( 2 in no. ) 1.3 mm , l 35 65 mm. , cable pin crimpar assembly , locking attachment plate for peri prosthetic fractures 4 & 8 hole, 3.5 mm, titanium , locking head screw self tapping 3.5 mm, l 10 60 mm, titanium , cortical self tapping screw 3.5 mm, l 10 60 mm, titanium , connecting screw, 5 mm , l 10 40 mm , trochanteric fixation plate with option of multiple screw & screw cerclage wire, various sizes, titanium. , cortical screw 3.5 mm, l 10 50 mm, titanium. , cortical screw 4.5 mm, l 14 60 mm, titanium. , cancellous screw 4 mm short thread, l 20 60 mm, titanium. , cancellous screw 4 mm full thread, l 20 60 mm, titanium. , cerclage cable co cr. , reconstruction femoral nail 9.0mm to 12mm dia, right / left, l ( 340 440 ) mm, titanium , hip screw 6.5mm, l ( 75 110 ) mm, titanium , end cap, cannulated , l 0mm 15mm, titanium , locking bolt , self tapping, l 26 mm 68mm for recon nail, titanium , washer 12.0 / 6.5mm dia., 2.5mm thick, titanium , proximal femoral nail 9 mm 13 mm dia. long, right / left, l ( 200mm 380mm ) , titanium , , femoral neck screw 11.0mm dia, l 80mm 115mm, titanium , hip screw 6.5mm , l 70mm 105mm, titanium , locking bolt , self tapping, l 26 mm 68mm for proximal femur nail, titanium , proximal femoral nail with anti rotation for short stature and osteoporotic bones 9.0 12mm, l 170mm 420mm, right / left, titanium , helical blade for proximal femoral nail , l 75mm to 120mm, titanium , end cap for proximal femoral nail, l 0 15mm extension , locking bolt , self tapping, l 26 mm 68mm for proximal femur nail, titanium , antigrade proximal femoral nail with one proximal hole should have a locking option from greater trochanter to lesser trochanter. dia 8 16 mm length 240 500mm, ss , end cap for antigrade femoral nail 12.0mm, extension 0mm 15mm, ss , proximal locking screw , ss , distal locking screw , ss , antigrade femoral nail with one proximal hole should have a locking option from greater trochanter to lesser trochanter. dia 8 16 mm length 240 500mm, titanium , end cap for antigrade femoral nail 12.0mm, extension 0mm 15mm, titanium , proximal locking screw , titanium , distal locking screw , titanium , cannulated interlocking femoral nail , dia. 9mm 13mm , l 340 440mm, ss , inter locking bolt, ss , end cap, ss , unreamed solid femoral nail , 9.0 10 mm dia., l 280mm 480mm, titanium. , inter locking bolt, titanium. , end cap, titanium. , cannulated interlocking femoral nail 09.0mm 13.0mm dia., l 280mm 480mm, titanium. , end cap , titanium , locking bolts , titanium , supra condylar femoral fracture nail 9.0mm dia., l 160mm 340mm, solid, titanium , supra condylar femoral fracture nail 9 mm to12mm dia., cannulated, l 200mm 380mm, titanium , distal locking screw , titanium , spiral blade l ( 60mm 80mm ) , titanium , proximal locking screw 6 mm, self tapping, titanium , end cap for nail using locking screw and spiral blades, titanium , retrograde femoral nail dia 9 14 mm, l 140 480 mm, ss , distal locking bolt , ss , proximal locking bolt , ss , end cap for retrograde nail, ss , femur expandable nail initial dia 8.5mm expandable upto 13.5mm, len 32cm to 46cm ( increment 2cm ) for antegrade / rotrograde insertion with or without proximal locking , kuntcher clover leaf i / m nail 6mm 14mmdia., length 20cms to 48cms ( 1cm increment ) , unreamed solid tibial nail 8.0mm 9.0mm dia.l 285mm 380mm, titanium , end caps for tibial nails, titanium , locking bolt , titanium , cannulated interlocking tibial nail 8 11 mm dia.l 300mm 400mm, titanium , end caps for tibial nails, titanium , locking bolt , self tapping, titanium , cannulated interlocking tibial nail 8mm 12mm l 200mm to 400mm, ss , end caps , ss , locking bolt , ss , multi directional tibial nail, dia 8mm 10mm, l 285 405mm for all fractures of tibia , titanium , locking screw 4.0mm and 5.0mm, l 18 60mm, for multi directional nails, titanium , cancellous bone locking screw 5.0mm with dual core, self tapping, l 30 50mm, titanium , end cap for multi directional tibial nail, extension 0 15mm, titanium , tibial expandable nail initial dia 8.5mm for length 30 38 cms expanded upto 13.5mm for antegrade insertion with or without proximal locking. , unreamed humeral nail , various sizes, titanium , spiral blade for unreamed humeral nail, titanium , locking bolts , self tapping, l 16mm 48mm for humerus nailing, titanium , proximal humeral naii various sizes, titanium , spiral blade for phn, titanium , locking bolts , self tapping, titanium , end caps with 0mm 15mm extension, titanium , humerus inter locking nail various sizes , ss , locking bolt, ss , end cap, ss , humerus inter locking nail various sizes , titanium , locking bolt, titanium , end cap, titanium , square nail for radius and ulna 1.5 , 2.0 , 2.5 mm dia., 17cms to 30 cms length ( 1cm increment ) , square nail for radius and ulna 3mm, 3.5mm dia., 17cms to 30 cms length ( 1cm increment ) , elastic nail 2.0, 2.5, 3 mm dia. , l 440mm, titanium , elastic nail 3.5 4.0 mm dia. , l 440mm, titanium , ender nail, dia 6 12 mm, various length, ss , injectable bone substitutes 100% nano crystal hydroxy apetite ( ha ) bone paste , 1 ml. , injectable bone substitutes 100% nano crystal hydroxy apetite ( ha ) bone paste , 2 ml. , injectable bone substitutes 100% nano crystal hydroxy apetite ( ha ) bone paste , 5 ml. , injectable bone substitutes, b tricalcium phosphate and hylonorate solution with needle10g and 12g for injectable bone substitute, 10cc , b tri calcium phosphate granules 1.4 2.8mm / porosity 60% bone substitutes, 5.0g , b tri calcium phosphate granules 1.4 2.8mm / porosity 60% bone substitutes, 10.0g , b tri calcium phosphate granules 1.4 2.8mm / porosity 60% bone substitutes, 20.0g , b tri calcium phosphate cylinder, 10.5mm dia, l 25mm bone substitutes , b tri calcium phosphate wedge, angle 14 , 25x20mm bone substitutes , b tri calcium phosphate wedge, angle 28 , 25x20mm bone substitutes , b tri calcium phosphate wedge, angle 22 , 25x20mm bone substitutes , b tri calcium phosphate wedge, angle 26 , 25x20mm bone substitutes , b tri calcium phosphate wedge, half round, 7° angle , for tibial osteotomy bone substitutes , b tri calcium phosphate wedge, half round, 10° angle , for tibial osteotomy bone substitutes , b tri calcium phosphate wedge, half round, 13° angle , for tibial osteotomy bone substitutes , cerclage wire with eye , dia. 1mm, 1.25mm, 1.5 mm l 280 to 600mm, ss , cerclage wire tightener . , wire mount for lcp 4.5 / 5.0 mm, titanium , s.s. wires: 16 , 18 , 20 , 22 , 24 gauge.146 , giggli wire , giggli wire handle , steinman pins dia., 3mm, 3.5mm., 4mm, x 150, 175, 200, 225 mm length, ss , steinman pins dia., 4.5mm, 5mm x 150, 175, 200, 225 mm length, ss , denham pins dia., 3mm, 3.5mm., 4mm, x 150, 175, 200, 225 mm length, ss , denham pins dia., 4.5mm, 5mm x 150, 175, 200, 225 mm length, ss , k wire, dia. 0.6mm, l 70mm, ss , k wire, dia. 0.8 mm l 150mm, ss , k wire with trocar tip , dia. 1.4mm, 1.6mm, 1.8mm, 2.0mm, l 150mm , ss , k wire with trocar tip , dia. 2.5mm, 3.0 mm , l 150mm , ss , k wire with trocar tip dia. 1.4mm, 1.6 mm, 1.8mm, 2.0mm , l 280mm, ss , k wire with trocar tip dia. 2.5mm, 3.0 mm , l 280mm, ss , k wire double tip, dia. 1.4mm, 1.6mm, 1.8mm, 2.0mm, l 150 300 mm, ss , k wire double tip, dia. 2.5mm, 3.0 mm l 150 300mm, ss , k wire with threaded tip, dia. 1.25mm, 1.6mm, 2.5mm l 150mm, ss , guide wire with spade point dia.1.5mm, 1.6mm, 2.0mm l 150 to300mm, ss , guide wire with trocar tip dia.1.25mm, 2.0mm l 200 to 230mm, ss , guide wire graduated ( threaded ) 1.25 mm dia. , ss , cortical screws 1mm dia, length 2mm to 20mm ( 2mm increments ) ss , cortical screws 1.5mm dia, length 2mm to 20mm ( 2mm increments ) ss , cortical screws 2mm dia, length 2mm to 20mm ( 2mm increments ) ss , cortical screws 2.5mm dia, length 2mm to 20mm ( 2mm increments ) ss , cortical screws 2.7 mm dia, length 6mm to 20 mm ( 2mm increments ) ss , cortical screws 2.7 mm dia, length 22 mm to 40 mm ( 2mm increments ) ss , cortical screws 3.5 mm dia, length 10mm to 40 mm ( 2mm increments ) ss , cortical screws 3.5 mm dia, length 45mm to 80 mm ( 5mm increments ) ss , cortical screws 3.5 mm dia, length 10mm to 40 mm ( 2mm increments ) , titanium , cortical screws 3.5 mm dia, length 45mm to 80 mm ( 5mm increments ) , titanium , cortical screws 4.5 mm dia, length ( 10mm to 40 mm ) ( 2mm increments ) , ss , cortical screws 4.5 mm dia, length ( 42mm to 80 mm ) ( 2mm increments ) , ss , cortical screws 4.5 mm dia, ( 10mm to 40 mm ) ( 2mm increments ) , titanium , cortical screws 4.5 mm dia, ( 42mm to 80 mm ) ( 2mm increments ) , titanium , cortical screws self tapping, 1 mm dia, length 2mm to 20 mm ( 2mm increments ) ss , cortical screws self tapping, 1.5 mm dia, length 2mm to 20 mm ( 2mm increments ) ss , cortical screws self tapping, 2 mm dia , length 2mm to 20 mm ( 2mm increments ) ss , cortex screws dia 2.4mm, self tapping, l14 40mm, ss , cortical screws self tapping, 2.5 mm dia, length 2mm to 20 mm ( 2mm increments ) ss , cortical screws self tapping, 2.7 mm dia, length 6mm to 30 mm ( 2mm increments ) ss , cortical screws self tapping, 3.5 mm dia, length 10mm to 40 mm ( 2mm increments ) ss , cortical screws self tapping, 3.5 mm dia, length 45mm to 85 mm ( 5mm increments ) ss , cortical screws self tapping, 4.5 mm dia, ( 10mm to 40 mm ) ss , cortical screws self tapping, 4.5 mm dia, short threaded ( 42mm to 80 mm ) ss , cortical screws self tapping, 4.5 mm dia, short threaded ( 82mm to 140 mm ) ss , cortical screw 1mm l ( 6 14 ) mm, self tapping, titanium , cortical screw 1.3mm l ( 6 18 ) mm, self tapping, titanium , cortical screw 1.5mm l ( 6 24 ) mm, self tapping, titanium , cortical screw 2.0mm l ( 6 38 ) mm, self tapping, titanium , cortical screw 2.4mm l ( 6 40 ) mm, self tapping, titanium , cortical screw 2.7mm l ( 6 40 ) mm, self tapping, titanium , cortical screw 3.5mm length 10 30mm self tapping ( titanium ) , cortical screw 3.5mm length 32 60mm self tapping ( titanium ) , cortical screw 4.5mm length 10 40mm self tapping ( titanium ) , cortical screw 4.5mm length 42 80mm self tapping ( titanium ) , cancellous screws self tapping fully threaded, 3.5 mm dia, length 10mm to 30mm ( 2mm increments ) ss , cancellous screw self tapping fully threaded, 3.5mm dia, length 35mm to 60mm ( 5mm increment ) ss , cancellous screw self tapping fully threaded, 3.5mm dia, length 65mm to 105mm ( 5mm increment ) ss , cancellous screws self tapping fully threaded , 3.5 mm dia, length 10mm to 30mm ( 2mm increments ) titanium , cancellous screw self tapping fully threaded, 3.5mm dia, length 35mm to 60mm ( 5mm increment ) titanium , cancellous screw self tapping fully threaded, 3.5mm dia, length 65mm to 105mm ( 5mm increment ) titanium , cancellous bone screws 4.0mm, fully threaded l ( 10mm 60mm ) with 2mm increment, ss , cancellous bone screws 4.0mm , partially threaded l ( 10mm 58mm ) with 2mm increment, ss , cancellous bone screws 4.0mm , partially threaded l ( 60mm 90mm ) , ss , cancellous screws 4.0 mm dia ( partially threaded ) length 10mm to 30mm ( 2mm increments ) titanium , cancellous screws 4.0 mm dia ( partially threaded ) length 35mm to 60mm ( 5mm increments ) titanium , cancellous bone screw 4.0mm , fully threaded, l ( 10mm 60mm ) , titanium , cancellous screws 6.5mm dia 16mm thread length 25mm to 70mm ( 5mm increments ) ss , cancellous screws 6.5mm dia 16mm thread length 75mm to 110mm ( 5mm increments ) ss , cancellous screws 6.5mm dia 32mm thread length 25mm to 70mm ( 5mm increments ) ss , cancellous screws 6.5mm dia 32mm thread length 75mm to 110mm ( 5mm increments ) ss , cancellous bone screws 6.5mm, fully threaded, l ( 20mm 110mm ) with 5mm increments, ss , cancellous screws 6.5mm dia 16mm threaded length 25mm to 70mm ( 5mm increments ) titanium , cancellous screws 6.5mm dia 16mm threaded length 75mm to 110mm ( 5mm increments ) titanium , cancellous screws 6.5mm dia 32mm partially threaded length 30mm to 70mm ( 5mm increments ) titanium , cancellous screws 6.5mm dia 32mm partially threaded length 75mm to 120mm ( 5mm increments ) titanium , cancellous screws 6.5mm , fully threaded length 45mm to 150mm ( 5mm increments ) titanium , malleolar screw 4.5mm l ( 25mm 70mm ) with 5mm increment, ss , malleolar screws 4.5 mm dia, length 25mm to 80mm ( 5mm increments ) , titanium , cannulated cancellous screws 3.5 mm self drilling short thread, l 10mm 30mm ( 2mm increments ) ss , cannulated cancellous screws 3.5 mm self drilling full thread, l 10mm 30mm ( 2mm increments ) ss , cannulated cancellous screws 3.5 mm self drilling short thread, l 10mm 30mm ( 2mm increments ) titanium , cannulated cancellous screws 3.5 mm self drilling full thread, l 10mm 30mm ( 2mm increments ) titanium , cannulated cancellous screws 4 mm dia short thread 20mm 60mm ( 2mm increments ) ss , cannulated cancellous screws 4 mm dia fully threaded 20mm 60mm ( 2mm increments ) ss , cannulated cancellous screws 4 mm dia short thread 20mm 60mm ( 2mm increments ) titanium , cannulated cancellous screws 4 mm dia fully threaded 20mm 60mm ( 2mm increments ) titanium , cannulated screw 4.5 mm short thread 20 to 60mm ( 2mm increments ) ss , cannulated screw 4.5 mm fully threaded 20 to 60mm ( 2mm increments ) ss , cannulated screw 4.5 mm short thread 20 to 60mm ( 2mm increments ) titanium , cannulated screw 4.5 mm fully threaded 20 to 60mm ( 2mm increments ) titanium , cannulated screw 6.5 mm short thread 30 to 60mm ( 5mm increments ) ss , cannulated screw 6.5 mm short thread 65 to 130mm ( 5mm increments ) ss , cannulated screw 6.5 mm fully threaded 30 to 60mm ( 5mm increments ) ss , cannulated screw 6.5 mm fully threaded 65 to 130mm ( 5mm increments ) ss , cannulated screw 6.5 mm short thread 30 to 60mm ( 5mm increments ) titanium , cannulated screw 6.5 mm short thread 65 to 130mm ( 5mm increments ) titanium , cannulated screw 6.5 mm fully threaded 30 to 60mm ( 5mm increments ) titanium , cannulated screw 6.5 mm fully threaded 65 to 130mm ( 5mm increments ) titanium , large cannulated cancellous screws 7.0 mm dia, 16mm thread length 50mm to 120mm ( 5mm increament ) ss , large cannulated cancellous screws 7.0 mm dia 32mm thread length 50mm to 120mm ( 5mm increment ) ss , large cannulated cancellous screws 7.0 mm dia, 16mm thread length 50mm to 120mm ( 5mm increament ) titanium. , large cannulated cancellous screws 7.0 mm dia 32mm thread length 50mm to 120mm ( 5mm increment ) titanium , locking screw dia 2.7mm ( head 2.4 ) , self tapping l 14mm to 60mm , ss , locking screw dia 2.7mm ( head 3.5 ) , self tapping l 20 mm to 60mm , ss , locking head screw 3.5mm, self tapping l ( 10mm 24mm ) ( 2mm increment ) , ss , locking head screw 3.5mm, self tapping l ( 26mm 48mm ) ( 2mm increment ) , ss , locking head screw 4.5mm self tapping size 16 85mm ss , locking head screw 5.0 mm, l 10 48 mm ( 2mm increment ) ss , locking head screw 5.0 mm , l 50 85 mm ( 2mm increment ) ss , locking head cancellous screw 5.0 mm , l 50 85 mm ( 2mm increment ) ss , locking cancellous screw 6.5 mm, l 20 100 mm ss , locking head screws 2.0mm self tapping l6 30mm titanium , locking head screws 2.4 mm self tapping l6 30mm titanium , locking screw dia 2.7mm ( head 2.4 ) , self tapping l 14mm to 60mm , titanium , locking screw dia 2.7mm ( head 3.5 ) , self tapping l 20 mm to 60mm , titanium , locking head screw 3.5mm, self tapping l ( 10mm 24mm ) ( 2mm increment ) , titanium , locking head screw 3.5mm, self tapping l ( 26mm 48mm ) ( 2mm increment ) , titanium , locking head screw 4.5mm self tapping size 16 85mm ( titanium ) , locking head screw 5.0 mm l 10 48 mm ( 2mm increment ) titanium , locking head screw 5.0 mm l 10 48 mm ( 2mm increment ) , titanium , locking head screw 5.0 mm l 50 85 mm ( 5mm increment ) , titanium , locking head cancellous screw 5.0 mm l 50 85 mm ( 5mm increment ) , titanium , cannulated locking head screw 5 mm, l 25 75 mm, ss , cannulated locking head screw 5 mm, l 80 120 mm, ss , cannulated locking head screw 5 mm, l 25 75 mm, titanium , cannulated locking head screw 5 mm, l 80 120 mm, titanium , locking cancellous screw 6.5 mm, l 20 60 mm, titanium , locking cancellous screw 6.5 mm, l 65 100 mm , titanium , headless compression screws 2.4mm, self drilling, cannulated, length 9 30mm, titanium. , headless compression screws 3 mm, self drilling, cannulated, length 10 40mm, titanium. , headless compression screws short threaded 4.5 mm, selfdrilling, cannulated, length 20 60mm ( increment of 2 mm ) , titanium. , headless compression screws long threaded 4.5 mm, self drilling, cannulated, length 20 60mm ( increment of 2 mm ) , titanium. , headless compression screws short threaded 4.5 mm, self drilling, cannulated, length 65 80mm ( increment of 5 mm ) , titanium. , headless compression screws long threaded 4.5 mm, self drilling, cannulated, length 65 80mm ( increment of 5 mm ) , titanium. , headless compression screws short threaded 6.5 mm, self drilling, cannulated, length 20 60mm ( increment of 2 mm ) , titanium. , headless compression screws long threaded 6.5 mm, self drilling, cannulated, length 20 60mm ( increment of 2 mm ) , titanium. , headless compression screws short threaded 6.5 mm, self drilling, cannulated, length 65 100mm ( increment of 5 mm ) , titanium. , headless compression screws long threaded 6.5 mm, self drilling, cannulated, length 65 100mm ( increment of 5 mm ) , titanium. , shaft screw 3.5 mm , l 12 60 mm, ss , shaft screw 4.5 mm , l 22 80 mm, ss , washer for 4.0 mm cancellous screws, ss , washer for 4.5 mm malleolar screws, ss , washer for 6.5 mm cancellous screws, ss , spiked washer for cancellous bone screw 6.5mm dia 13.5mm x 6mm, ss , spiked washer for 4.0mm cancellous screw, ss , washer 10 mm dia., titanium , washer, 13.0 mm dia., titanium , hemispherical washer for 6.5 mm screws, ss , washer holding clip , drill bit ( stainless steel ) , 1.0 mm , drill bit ( stainless steel ) , 1.5 mm , drill bit ( stainless steel ) , 2mm, l 85 mm , 2 flute , drill bit ( stainless steel ) with quick coupling end, 2.5mm, l 100 mm , drill bit 2.5mm with quick coupling end, titanium. , drill bit ( stainless steel ) 2.7mm , 2 flute with quick coupling end , drill bit ( stainless steel ) 2.7mm 3 flute with quick coupling end , drill bit ( stainless steel ) 3.2mm , 2 flute with quick coupling end , drill bit ( stainless steel ) 3.2mm , 3 flute with quick coupling end , drill bit ( stainless steel ) 3.5mm with quick coupling end , drill bit ( stainless steel ) 4.5mm with quick coupling end , drill bit ( stainless steel ) 3.5mm extra long , 2.8mm graduated drill bit for locking compression plate, ss , cannulated drill bit 2.5 mm dia, ss , cannulated drill bit 2.7 mm dia, ss , cannulated drill bit 3.2 mm dia, ss , cannulated drill bit 3.5 mm dia, ss , cannulated drill bit 4.5 mm dia, ss , cannulated drill bit 5.0 mm dia, ss , bone tap with t handle 1.5mm , bone tap with t handle 2.0mm , bone tap with t handle 2.7mm , bone tap with t handle 3.5mm , bone tap with t handle 4.5mm , bone tap with t handle 6.5mm , cannulated bone tap 2.5 mm dia , cannulated bone tap 3.5 mm dia , cannulated bone tap 4.5 mm dia , cannulated bone tap 6.5 mm dia , cannulated bone tap 7.0 mm dia , quick coupling handle. , quick coupling bone tap, 3.5 mm. , quick coupling bone tap, 4.5 mm. , screw driver non canulated 2.0mm, hexagonal , screw driver non canulated 2.7mm, hexagonal , screw driver non canulated 3.5mm, hexagonal , screw driver non canulated 4.5mm, hexagonal , screw driver canulated 3.5mm, hexagonal , screw driver canulated 4.5mm, hexagonal , screw driver canulated 7.0mm, hexagonal , screw driver star shaped 3.5 mm , screw driver star shaped 4.5 mm , torque limiting screw driver for 3.5mm locking head screw , torque limiting screw driver for 4.5 / 5.0mm locking head screw , quick coupling handle with quick coupling screw driver shaft , 3.5 mm , quick coupling handle with quick coupling screw driver shaft , 4.5 mm , u type staple 3mm dia 10mm 35mm length ( at 5 mm increments ) , coventary staple 5mm, 10mm, 15mm step , bone cement with low viscosity 20g. , bone cement with medium viscosity 20g. , bone cement with high viscosity 20g. , bone cement with low viscosity 40g. , bone cement with medium viscosity 40g. , bone cement with high viscosity 40g. , bone cement with gentamycin, low viscosity 20g. , bone cement with gentamycin, medium viscosity 20g. , bone cement with gentamycin, high viscosity 20g. , bone cement with gentamycin, low viscosity 40g. , bone cement with gentamycin, medium viscosity 40g. , bone cement with gentamycin, high viscosity 40g. , bone cement with gentamycin+clindamycin, 40g. , bone cement with gentamycin+vancomycin, 40g. , bone cement with tobramycin, 40g. , bone cement mixing bawl with spatula, ss , disposable cement gun. , re usable cement gun with accessories ( autoclavable ) . , only accessories for cement gun. , re usable cement gun with vacuum mixing ( autoclavable ) . , accessories for vacuum mixing cement gun. , vacuum pump. , gentamycin cement beads 3 to 5 mm dia. ( 10 beads ) , gentamycin cement beads 3 to 5 mm dia. ( 30 beads ) , gentamycin cement beads 7 to 9 mm dia. ( 10 beads ) , gentamycin cement beads 7 to 9 mm dia. ( 30 beads ) , a m prosthesis 37 mm to 57 mm with 2 mm increment , fixed bipolar head with fenestrated femoral stem small / medium / large, ss , bipolar hip prosthesis ( talwarkar type ) 37mm to 57mm with 2mm increment , bipolar hip prosthesis ( modular type ) cobalt chrome cup & head various sizes with various neck length , bipolar hip prosthesis ( modular type ) femoral stem various sizes, cemented , cement restrictor , stem centralizer , non cemented bipolar hip prosthesis ( modular type ) cup & head various sizes with various neck length. , non cemented bipolar hip prosthesis ( modular type ) ha coated femoral stem various sizes. , non cemented bipolar hip prosthesis ( modular type ) cup & head various sizes with various size neck length. , non cemented bipolar hip prosthesis ( modular type ) porous coated femoral stem various sizes. , total hip acetabular cups various sizes , total hip metal head dia 22, 26, 28mm with various neck length , femoral stem various sizes. , stem centralizer , cement restrictor , modular stem ( stainless steel ) small, medium, large , double tappered, highly polished, collar less, self centering, variable offsets. , modular internal head 22, 26, 28 mm ( stainless steel ) with various neck length. , modular thr 10 degree acetabular cup with lpw: , stem centralizer , cement restrictor , cementless hip system fully ha coated titanium alloy femoral stem with various sizes. , cementless hip system metal head 28 mm with variable neck length. , cementless hip system acetabular cup cementless poro coated with option of screws. , cementless hip system acetabular highly crosslink poly cup liner with 10 degree lpw different sizes. , bone screw to fix the cup. , cementless hip system porous coated titanium alloy femoral stem with various sizes. , cementless hip system metal head 28 mm with variable neck length. , cementless hip system acetabular cup cementless poro coated with option of screws. , cementless hip system acetabular highly crosslink poly cup liner with 10 degree lpw different sizes. , bone screw to fix the cup. , cementless hip system proximal ha coated titanium alloy femoral stem ( double tappered ) various sizes. , cementless hip system metal head 28 mm with variable neck length. , cementless hip system acetabular cup cementless ha coated with option of screws. , cementless hip system acetabular highly crosslink poly cup liner with 10 degree lpw different sizes. , bone screw to fix the cup. , cementless hip system ha / poro coated femoral stem, various sizes. , cementless hip system metal head 32, 36 mm with variable neck length. , cementless hip system acetabular cup ha / poro coated with option of screws, should accomodate 32, 36 mm head with same cup. , cementless hip system acetabular highly crosslink polycup liner with 10 degree lpw different sizes, should accommodate 32, 36 head. , bone screw to fix the cup. , cementless hip system ha / poro coated femoral stem, different sizes. , cementless hip system ceramic head ( bilox delta ) 32, 36 mm with variable neck length. , cementless hip system acetabular cup ha / poro coated with option of screws, should accommodate 32, 36 mm head with same cup. , cementless hip system acetabular highly crosslink poly cup liner with 10 degree lpw different sizes, should accommodate 32, 36 head. , bone screw to fix the cup. , cementless hip system ha / poro coated femoral stem, different sizes. , cementless hip system ceramic head ( bilox delta ) 32, 36 mm with variable neck length. , cementless hip system acetabular cup ha / poro coated with option of screws, should accomodate 32, 36 mm head with same cup. , cementless hip system acetabular ceramic liner, should accommodate 32, 36 head. , bone screw to fix the cup. , primary femoral stem: non cemented primary femoral tapered short, rounded tipped short stem made of titanium alloy porocoated with layer of ha allowing preservation of femoral neck. , non cemented acetabular cup: non cemented hemispherical acetabular cup made of titanium alloy with peripheral anti rotation fins with inbuilt ceramic liner made of zirconia & alumina, with different diameters. , ceramic femoral head for cup: ceramic femoral head with various sizes. , femoral adaptor sleeve: femoral adaptor sleeve made of titanium alloy with clean taper fit and compatible with the inner ceramic taper of the femoral head with different sizes , uncemented femoral stem : uncemented primary femoral tapered blade style stem made of titanium alloy with poro coating with high friction titanium coating. with anterior & posterior longitudinal flute, should be proximal femoral bone preserving. , bilox delta ceramic head 32, 36 mm with variable neck length. , uncemented hip system acetabular cup ha / poro coated with option of screws, should accomodate 32, 36 mm head with same cup. , uncemented hip system acetabular highly crosslink poly cup liner with 10 degree lpw , various sizes, should accommodate 32, 36 head. , bone screw to fix the cup. , un cemented hip system ha / poro coated femoral stem, various sizes. , bilox delta ceramic head 32, 36 mm with variable neck length. , un cemented trabecular metal cup different sizes accommodate large head with screw option. , uncemented hip system acetabular highly crosslink polycup liner with 10 degree lpw , various sizes, should accommodate 32, 36 head. , bone screw to fix the cup. , uncemented femoral stem, proximal sleeve, femoral head femoral head: 36 mm ceremic head of alumina & zerconia with different neck length. stem: noncemented proximal loading option titanium alloy, tapered with coronal slot & distal flutes , variable neck length diameter & offset. sleeve: porocoated proximal femoral sleeve with locking mechanism with femoral stem , various sizes. , noncemented titanium acetabular cup with gription poro coating with locking mechanism for liner, various sizes with screw locking option. , highly crosslink poly cup liner with 10 degree lpw different sizes, should accommodate 32, 36 head. , bone screw to fix the cup. , cemented long stem, various sizes & offsets. , acetabular cup with lpw. , large diameter head 32, 36 , stem centralizer , cement restrictor , revision uncemented acetabular cup : multi hole titanium alloy actebular shells with a full 180 degree hemisphere poro coated with option of multiple screw holes for fixation with options to fit all liners ( metal, ceramic & poly ) of various sizes . , revision acetabular screw: 5.5 titanium alloy acetabular revision screws for peripheral area of cup in various sizes. , 6.5 mm titanium self tapping cancellous screw for use in central area of the cup. , uncemented hip system acetabular highly crosslink poly cup liner with 10 degree lpw , various sizes, should accommodate 32, 36 head. , ceramic femoral head for cup: ceramic femoral head made of alumina & zirconia with various sizes. , distally interlocked femoral reconstruction revision hip system ha coated distal locking option with various diameter & length with the provision of reconstruction of trochanter & cerclage cable hole. , distal interlocked screw titanium distal locking self tapping various sizes. , acetabular reconstruction system acetabular reconstruction titanium ring with ha coated acetabular shell with option of multiple central & peripheral screws with corresponding screws ( 8 screws ) . , posteriorly lipped highly cross linked poly liner various sizes. , bilox delta ceramic femoral head for cup, various sizes. , femoral revision system distally fixed revision femoral stem, porous coated, with calcar replacement options different diameter. , acetabular mesh, ss , acetabular mesh, titanium , femoral mesh, titanium , acetabular cage, various sizes, titanium , uni condylar mobile knee system consisting of femoral components, tibial inserts & tibial tray of various sizes. , femoral component , co cr, various sizes , tibial component, titanium alloy, various sizes , tibial insert, various sizes , patellar button, various sizes , total condylar, pcl substituting , fixed bearing / mobile bearing with the provision of high flex knee system consist of following components: femoral component, tibial component, tibial insert. , cruciate retaining high flexion knee system consist of following components: femoral component, titanium tibial tray , highly cross linked poly insert . , posterior stabilized fixed bearing femoral components with ability to attach extender stems. , highly cross linked poly insert with locking mechanism, with option of both cruciate substituting and retaining various sizes. , co cr tibial tray with ability to attach extension stem, various sizes. , patella along with three pegs. , patient specific total knee prosthesis ( us fda approved ) : consists of femoral & tibial component, tibial insert. the tkr design should be patients own ct or mri based , the mechanical based alignment to be matched with patients own mechanical axis, the cutting block must provide patients own reference for distal femoral & proximal tibial cut, it should have robust design and should have faster turn around time ( less than 4 weeks ) . , semi constraint total knee prosthesis: femoral component with the ability to accept any kind of metal augments & offset extension stem. , femoral metal augment for distal & posterior femur various sizes , femoral extension stem various offset & sizes , tibial component with ability to accept various sizes tibial augmentation blocks, wedges & extension stem. , semi constraint tibial knee inserts all sizes , metal tibial wages step, hemi & full of various sizes and thickness , tibial extension stem various offset & sizes , semi constraint total knee prosthesis: femoral component with the ability to accept any kind of poro coated metaphyseal sleeves & offset extension stem. , metaphyseal porocoated femoral sleeves, various sizes. , femoral extension stem various offset & sizes , semi constraint mobile bearing tibial knee inserts all sizes , tibial component mobile bearing tray with ability to accept various sizes porocoated metaphyseal sleeves & extension stem. , metaphyseal porocoated tibial sleeves, various sizes. , tibial extension stem various offset & sizes , cable wire with sleeves, ss , sleeve for cable wire ss , cable wire with sleeves, co cr , sleeve for cable wire co cr , neer prosthesis fixed shoulder various sizes. , hemi shoulder stem, co cr . , hemi shoulder humeral head , total shoulder humeral stem with holes in fins for muscle and soft tissue reconstruction cemented / uncemented. , humeral head. , glenoid prosthesis cross linked poly. , cemented humeral stem with 0 10 degree retroversion, co cr. , non cemented humeral stem with 0 10 degree retroversion, co cr. , high mobility humeral polythelene cup. , glenoid implant with fixation screws. , locking / non locking fixation screws. , pulse lavage wound debridement system ( disposable battery operated with concurrent suction and fan spray tip ) , antibiotic spacers for hip joint ( high resistance bone cement body loaded with antibiotic ) , all sizes. , antibiotic spacers for knee joint , all sizes , elbow prosthesis total elbow implant with accessories i ) humeral component various sizes ulna component various sizes , single pin clamp , double pin clamp , open double pin clamp , twin adjustable clamp straight , twin adjustable clamp curved , transverse clamp , connecting clamp , single pin clamp with extension plate , double pin clamp with extension plate. , connecting rod 5.0 mm , spanner 11 mm , t wrench 11 mm , box spanner 11mm , triple tocar set with handle , tubular rod 4 , tubular rod 6 , tubular rod 8 , tubular rod10 , tubular rod 12 , tubular rod 14 , tubular rod 16 , tubular rod 18 , tubular rod 20 , tube to tube clamp , threaded schanz pins ( self tapping ) dia. 3.5 mm, shaft 4 mm , short threadedl 125mm. , threaded schanz pins ( self tapping ) 4.0 mm, short threaded, l 100 200 mm , threaded schanz pins ( self tapping ) 4.0 mm long threaded, l 100 200 mm , threaded schanz pins ( self tapping ) 4.5 mm short threaded, l 100 200 mm , threaded schanz pins ( self tapping ) 4.5 mm long threaded, l 100 200 mm , threaded schanz pins ( self tapping ) 5.0 mm short threaded, l 100 200 mm , threaded schanz pins ( self tapping ) 5.0 mm long threaded, l 100 200 mm , cancellous front threaded 5 mm schanz pins, thread l 16mm, l 100 200 mm. , cancellous front threaded 5mm schanz pins, thread l 32 mm, l 100 200 mm. , cancellous front threaded 5mm schanz pins , thread l 50 mm, l 100 200 mm . , threaded schanz pins 2.0 mm . , threaded schanz pins 2.5 mm . , threaded schanz pins 3.0 mm . , threaded schanz pins 3.5 mm. , small single pin clamp 4.0 x 2.5 mm for 2 & 2.5 mm schanz pins. , small single pin clamp 4.0 x 4.0 mm for 3.5 mm schanz pins. , small connecting clamp 4.0 x 4.0 mm , connecting rods 4.0 mm dia length 100 to 300mm ( 50mm increment ) , open small single pin clamp 4.0 x 2.5 mm , open small connecting clamp 4.0 x 4.0 mm , small compression distraction device size: 60mm, 75mm, 100mm, 150mm , spanner 8 mm , t wrench 8 mm , ball & socket type distractor set with 360 degree rotation compatible with 2.5 mm & 3.5 mm schanz screw. ( rate to be quoted for one set consist of ball & socket distractor assembly with two 2.5 mm & two 3.5 mm schanz screw ) , k wire with threaded tip, 1.25 mm, l 100 mm , k wire with threaded tip, 1.60 mm, l 100 mm , schanz pin 2.5 mm , various sizes , connecting rod 3 mm , various sizes , universal clamps for 1.25 mm & 1.60 mm wire , connecting clamps , dc assembly , femoral distractor set. , rail rod, l 200 400 mm , central clamp , swivel clamp , end clamp , schanz pin 6 mm, tappered 4.5 mm to 3.5 mm. , schanz pin 6 mm, tappered 6 mm to 5 mm. , schanz pin 6 mm, tappered 4.5 mm to 3.5 mm with hydroxy apetite ( ha ) coating for threads. , schanz pin 6 mm, tappered 6 mm to 5 mm with hydroxy apetite ( ha ) coating for threads. , rail rod, l 150 250 mm , central clamp , swivel clamp , end clamp , schanz pin 4 mm, tappered 3.5 mm to 3 mm. , schanz pin 6 mm , tappered 4.5 mm to 3.5 mm with hydroxy apetite ( ha ) coating for threads. , ctev set small ( components ) link joint 30, connecting rods ( 2.5mm ) st. 4 3, 6 2, 8 2, z rods 2, l rods large 2, small 2, distractor 4mm 4 2, 6 2, foot plate 1, k wires 2mm 6 2, 1.6mm 6 6, allen keys , ctev set medium ( components ) link joints 30, connecting rods ( 3.0mm ) st. 5 3, 6 2, 10 2, z rods 2, l rods ( large ) 2, small 2, distractor 4mm 4 2, , 6 2, foot plate 1, k wires ( 2.0mm ) 5 3, 6 2, allen keys , ctev set large ( components ) clamps aescualp type 4x2.5 9, 4x4 12, connecting rods 6 5, 12 2, distractors 4mm 6 2, d.c.rods 2, foot plate 1, k wires 2.5mm5 5, 2.0mm 6 6, allen keys , spring jess fixator set for ctev. , ilizarov half rings ( the holes should match with the stainless steel ring ) sizes 110, 120, 130, 140, 150, 160, 180, 200, 220 mm , carbon fiber frame , ilizarov half rings ( the holes should match with the carbon ring ) sizes 110, 120, 130, 140, 150, 160, 180, 200, 220 mm, ss , ilizarov fixator set 5 / 8 ring ( sizes 110, 120, 130, 140, 150, 160, 180, 200 mm ) , ss , ilizarov cannulated bolt. , ilizarov connection bolt. , ilizarov slotted bolt. , ilizarov nuts. , ilizarov bushing. , ilizarov telescopic rods 100mm , ilizarov telescopic rods 150 mm , ilizarov telescopic rods 200 mm , ilizarov telescopic rods 250mm , ilizarov telescopic rods 300 mm , ilizarov telescopic rods 350 mm , ilizarov graduated telescopic rods 60mm, , ilizarov graduated telescopic rods 100 mm , ilizarov graduated telescopic rods 150 mm , ilizarov graduated telescopic rods 200mm, , ilizarov graduated telescopic rods 250 mm , ilizarov threaded rods 100mm 200mm ( 50 mm increments ) up to 400mm , ilizarov male post , ilizarov female post , ilizarov male hinge , ilizarov female hinge , ilizarov male hinge, low profile , ilizarov female hinge, low profile , ilizarov hinges 90 degree standard , ilizarov hinges 90 degree low profile , ilizarov spacing washers , 1.5 mm , ilizarov spacing washers , 2 mm , ilizarov split locking washers , 2 mm , ilizarov slotted washers , 4 mm , ilizarov flat sided washers, 2mm , ilizarov flat sided washers , 4 mm , ilizarov conical couple washer , ilizarov oval washer , nylon washer , nylon insert nut. , ilizarov italian arch , ilizarov threaded socket & buckles. , ilizarov short connection plate , ilizarov curved connection plate , ilizarov wire fixation nuts + bolts central hole , ilizarov wire fixation nuts + bolts side hole , ilizarov square nut , ilizarov threaded rod 60, 80, 100, 120, 150 mm. , ilizarov threaded rod 200, 250, 300, 350, 400 mm , ilizarov slotted threaded rod 60, 80, 100 mm. , ilizarov oblique support connection. , ilizarov rotational & transational device. , ilizarov twisted plate , ilizarov multiple pin fixation clamp. , ilizarov single schanz pin fixation bolt , wires for ilizarov bayonet tip, cortical 1.5x ( 300 400mm ) , wires for ilizarov bayonet tip, cortical 1.8x ( 300 400mm ) , wires for ilizarov trocar tip 1.5x ( 300 400mm ) , wires for ilizarov trocar tip 1.8x ( 300 400mm ) , stopper wires for ilizarov ( olive wires ) one piece, 1.5x ( 300 400mm ) , stopper wires for ilizarov ( olive wires ) one piece, 1.8x ( 300 400mm ) , wrench shoes small, medium, large , spanner for ilizarov fixator, 10 mm , t wrench for ilizarov fixator , box spanner , universal hinge , wrencho cubes , wire tensioner dynamic , wire fixation buckle , negative suction drainage set ( disposable ) 10fg to 18fg sizes single tube , negative suction drainage set ( disposable ) 10fg to 18fg sizes double tube sterile disposable drapes ( all drapes should be single use with well packed in peel off pouche with inbuilt ethylene oxide ( e.o ) indicator having shelf life not less than 3 years, product should have isi / iso certified ) & should have sterilization certificate from sterilizing source. , sterile u draps with adhesive strip ( double layer disposable ) , 200 x 240 cm medical fabric not less than 60 gsm , sterile u draps with adhesive strip ( double layer disposable ) , 160 x 200 cm medical fabric not less than 60 gsm , sterile knee o drape with adhesive strip ( reinforced impermeable 3 layer fabric ) , 200x320 cm , sterile elbow drape with adhesive strip ( reinforced impermeable 3 layer fabric ) , 150 x 250 cm , sterile knee drape with adhesive strip ( reinforced impermeable 3 layer fabric ) with absorbent centre sheet size 75x100 cm & total size 120 x 160 cm. , sterile hip u drape with adhesive strip ( reinforced impermeable 3 layer fabric ) with absorbent centre sheet size 100x150 cm & total size200 x 300 cm. , sterile hip u drape with adhesive strip ( reinforced impermeable 3 layer fabric ) with absorbent centre sheet size 100x150 cm & attached leg pouch, total size 200 x 240 cm, medical grade sms ( sms=spun +melt bloun+spun ) fabric. , sterile spinal drape ( reinforced impermeable 3 layer fabric ) with adhesive strip on central aperture , 8x12 cm, with absorbent centre sheet size 100x150 cm , total size 150x300 cm. , sterile knee arthroscopy drape ( reinforced impermeable 3 layer fabric ) size: 200x300cm with fluid collection pouch. , sterile disposable wrapping drape ( ldpe ) , 15 x 100 cm , sterile disposable wrapping drape ( ldpe ) , 30 x 150 cm , sterile cling film roll, 12x100 cm. , face mask with anti fog shield ( 4 ply ) . , sterile disposable legging ( pair packing ) with fluid repellant fabric. , sterile c arm cover ( pair ) . , screen cover ( transparent ) with adhesive strip, 160x200 cm , mackintosh sheet, autoclavable, size 1 x 2 meter ( rubber ) . , disposable sterile water proof sheets ( double packed ) , 150x200 cm. , incise drape 20x30 cm , incise drape 30x30 cm , incise drape 30x45 cm , incise drape 40x45 cm , incise drape 45x60 cm , povidone iodine impregnated incise drape 20x ( 20 30 ) cm , povidone iodine impregnated incise drape 25x ( 30 40 ) cm , povidone iodine impregnated incise drape 30x ( 45 55 ) cm , povidone iodine impregnated incise drape 35x ( 55 65 ) cm , povidone iodine impregnated incise drape 40x60 cm , trolley cover , size 125x150cm , trolley cover, size 150x200 cm , camera cover ( pre sterile disposable ) with 2 tying string. , cable cover ( pre sterile ) , stockinette ( disposable ) , 2x 5 meter ( cotton ) . , stockinette ( disposable ) , 3x 5 meter ( cotton ) . , stockinette ( disposable ) , 4x 5 meter ( cotton ) . , stockinette ( disposable ) , 5x 5 meter ( cotton ) . , stockinette ( disposable ) , 6x 5 meter ( cotton ) . , arm sling pouch should be made up of soft quality fabric, should have non stretching strap, adjustable, closure with velcro plastic buckles, s / m / l , arm sling pouch should be made up of soft quality fabric, should have non stretching strap, adjustable, closure with velcro plastic buckles, xl , ankle wrap, 3 elastic band with valcro closure, s / m / l , ankle wrap, 3 elastic band with valcro closure, extra large , ankle brace should be made up of foam fused fabric, should have semi rigid plastic splints on both side of brace, velcro closure and plastic buckles for locking, sizes s / m / l. , ankle brace should be made up of foam fused fabric, should have semi rigid plastic splints on both side of brace, velcro closure and plastic buckles for locking, sizes xl. , tennis elbow band ( high strength foam padded strap ) , s / m / l , tennis elbow band ( high strength foam padded strap ) , extra large , wrist binder with thumb support. , shoulder immobilizer s / m / l , shoulder immobilizer, extra large , cot finger splint ( u shaped to keep finger in straight position ) , s / m / l , frog splint ( four leg construction allow self closing for immobilization of dip joint in extension & pip joint in flexion ) , s / m / l , spoon splint ( to keep finger tip in extension ) , s / m / l , protector splint for finger tip injury ( + mark design to protect finger tip from all around ) , s / m / l , base ball splint for distal phalanx injury ( finger tip fold over design ) , s / m / l , mallet finger splint ( splint to keep dip joint in 10 degree hyper extension ) , s / m / l , finger extension splint ( spring wire construction for keeping finger in extension ) , s / m / l , finger flexion splint ( spring wire construction for keeping finger in flexion ) , s / m / l , thumb spica splint , knuckle bender splint , carpel tunnel splint day time , carpel tunnel splint night time , arm sling strap heavy duty strap with two way buckle system. , wrist & fore arm splint ( right & left ) , static wrist cock up splint ( right & left ) , s / m / l , dynamic wrist cock up splint ( right & left ) . , foot drop splint, s / m / l , foot drop splint, xl , boot and de rotation bar splint , compression stockings ( latex free ) with moderate compression option above knee, s / m / l , compression stockings ( latex free ) with moderate compression option below knee, s / m / l , resistance band for stage 1 to stage 6 ( for resistance rehabilitation exercise ) , various thickness. , bolster , s / m / l. , triangular pillow for abduction of hip. , silicon heel cushion ( right & left ) , s / m / l , silicon insole, s / m / l , silicon arch pad, s / m / l , silicon metatarsal pad, s / m / l , silicon toe spacer , cast shoe, s / m / l , cast shoe, xl , kramer wire splint :width 7.5 cm, l 100 cms , kramer wire splint :width 10 cm, l 100 cms , thomas splint ( well padded thigh ring ) , small , thomas splint ( well padded thigh ring ) , medium , thomas splint ( well padded thigh ring ) , large , bohler brown splint , small , bohler brown splint, medium , bohler brown splint, large , bohlers stirrup, small , bohlers stirrup , medium , bohlers stirrup , large , screws for bohler stirrup , walker fixed type , walker adjustable & foldable ( coated aluminum frame work with comfortable hand grips. , auxiliary crutches ( adjustable height ) , aluminum , elbow crutches ( adjustable height ) , aluminum , walking stick, aluminum mono pod with handle grip and rubber tip. , walking stick, aluminum tri pod with handle grip and rubber tip. , walking stick, aluminum tetra pod with handle grip and rubber tip. , wheel chair ( foldable ) mag wheel, seat width 16 / 18, weight capacity > 99 kg, fixed arm rest, 8 solid caster, 24 solid rear wheel, double crossed bar. , wheel chair ( foldable ) with commode mag wheel, seat width 16 / 18, weight capacity > 99 kg, fixed arm rest, 8 solid caster, 24 solid rear wheel, double crossed bar. , wheel chair mag wheel, seat width 16 / 18, weight capacity > 99 kg, fixed arm rest, 8 solid caster, 24 solid rear wheel. , wheel chair with commode mag wheel, seat width 16 / 18, weight capacity > 99 kg, fixed arm rest, 8 solid caster, 24 solid rear wheel. , lumbar traction kit with rod ( all sizes ) , cervical traction kit with rod ( all sizes ) soft foam padding , pelvic traction kit with rod. , b / k skin traction kit with velcro strap. , leg traction kit with pully. , buck pulley. , plastic pulley single. , balkan frame with accessories compatible with hospital beds. , paraffin wax, 1kg , paraffin wax, 5kg , gymnasium ball, 75 cm , physiotherapy clay, 1 kg , weight cuff, 1 / 2 kg . , weight cuff , 1 kg , weight cuff , 2 kg , weight cuff, 3 kg , bone marrow aspiration system , bone biopsy needle ( jamshidi ) , bone currate small , bone currate medium , bone currate large , bone nibbler small , bone nibbler medium , bone nibbler large , bone nibbler double action straight small , bone nibbler double action straight medium , bone nibbler double action straight large , bone nibbler double action curved small , bone nibbler double action curved medium , bone nibbler double action curved large , hammer small ( 250 gm ) , hammer medium ( 500 gm ) , hammer large ( 750 gm ) , bone cutter medium , bone cutter large , self retaining retractor without hinges, small , self retaining retractor without hinges, medium , self retaining retractor without hinges, large , self retaining retractor with hinges , small , self retaining retractor with hinges , medium , self retaining retractor with hinges , large , acl / pcl reconstruction set consist of a to i. , tibial tunnel guide system for acl reconstruction ( should have locking system with variable angle adjustment form 35 to 60 degree ) , cannulated flower tip drill bit with laser marking for calculation of bone tunnel length for acl reconstruction. size 5, 6, 7, 8, 9, 10, 11 mm , femoral off set guide for 4, 5, 6, 7 , 8 mm. , drill tip graft passing pin 2.4 mm. , drilling wire 2.4 mm. , graft preparation board. , tendon stripper, 7 mm dia., close ended , thickness tester , bio screw driver. , acl repair implants : stainless steel cannulated interference screws dia 7 10 mm l 20, 25, 30mm , acl repair implants : titanium cannulated interference screws dia 7 10 mm l 20, 25, 30mm , acl repair implants : titanium with rounded thread soft cannulated interference screws dia 7 10 mm l 20, 25, 30mm , acl repair implant : bio absorbable interference screw size 7 11mm, l 20 30mm , acl repair implant : tibial bio absorbable interference screw with proximal slop to flush fix in anterior tibial cortex size 7 11mm, l 20 30mm , acl repair implant : bio composite interference screw size 7 11mm, l 20 30mm , acl femoral fixation sheath with screw for tendon graft fixation, various sizes , acl tibial fixation sheath with screw for tendon graft fixation, various sizes , acl femoral fixation device ( metal pin ) , 15mm cortical length, l 40mm , acl femoral fixation device ( bio absorbable pin , various sizes ) , button for lateral cortical femoral fixation , button along with loop for acl reconstruction, various sizes , acl suture button with flexible loop for lateral femoral fixation, various sizes. , acl suture button with continuous loop for lateral femoral fixation, various sizes. , acl reconstruction button along with loop & preloaded with passing suture , l 15 35 mm , ligament staple in dia 8 11 mm , suture post ( flat head screw ) sizes 4.5x ( 25 50 ) mm , titanium , meniscal repair system of meniscal tear ( disposable ) , meniscal needle with continuous fiber wire needle , drainage / irrigation needle for knee arthroscopy. , shoulder cannula disposable . , shoulder cannula reusable. , 1.9 mm anchore with #2 suture with handle , titanium , 2.7 mm anchore with #2 suture with handle , titanium , 2.8 mm anchore with #2 suture with handle, titanium , 3 mm anchore with #2 suture with handle , titanium , 3.5 mm anchore with #2 suture with handle , titanium , 5 mm suture anchore with #2 polyester suture , titanium , 5.5 mm fully threaded anchor #2 suture , titanium , 3 mm knotted bio absorbable anchor , 2.3 mm knot less bio absorbable anchor , 2.9 mm knot less bio absorbable anchor , 2.3 mm knot less peek anchor , 2.9 mm knot less peek anchor , 3.5 mm knot less bio absorbable anchor , 3.5 mm knot less peek anchor , 5.5 mm bio absorbable anchor with thread , all peek anchor for double & single row cuff repair. dia 4.5, 5.5 & 6.5 mm , suture passer 45 degree left and right , suture passer 90 degree left and right , suture shuttle needle. , uhmw # 2 number white / coloured suture with needles , uhmw # 2 number stripped colour suture with needles , acromio clavicular joint dislocation repair system having button on one side & suture disc on other side , connected with suture wire , normal saline 3 litre pack , radio frequency ablation probe ( different angle ) for arthroscopy, disposable ( please quote rate for one radio frequency ablation probe only and machine / generator to be provided by company for ablation probe use for surgery ) , cervical disc replacement system metal on poly. , cervical disc prosthesis metal on metal with anterior translation. , anterior cervical inter body fusion peek cage size , height 5 12 mm , anterior cervical peek inter body fusion spacer and plate with integrated double screws for each vertebra, 5 12 mm , anterior cervical peek inter body fusion spacer and plate with integrated single screw for each vertebra, 5 12 mm , low profile cervical locking fixation plate with 4 self drilling & self locking screw single level. , low profile cervical locking fixation plate with 6 self locking screw double level. , anterior mesh cage for cervical spine, titanium , variable angle anterior cervical plate with self drilling screw and inbuilt locking screw, single level with 4 screw , variable angle anterior cervical plate with self drilling screw and inbuilt locking screw, double level with 6 screw , variable angle anterior cervical plate with self drilling screw and inbuilt locking screw, three level with 8 screw , posterior cervical system lateral mass screw 3.5 mm , various length, titanium , posterior cervical system lateral mass rod, titanium , pedical screw for cervical spine 3.5 mm, various length, titanium , pedical screw rod for cervical spine, titanium , occipito cervical fixation rod plate system, small, titanium , occipito cervical fixation rod plate system, medium , titanium , occipito cervical fixation rod plate system, large, titanium , trans articular odontoid cannulated screw all sizes, titanium , pedicle screws 4.5, 5.5, 6.5, 7.5 mm ( mono axial ) , titanium , pedicle screws 4.5, 5.5, 6.5, 7.5 mm ( poly axial ) , titanium , pedical screw rod, titanium , transverse connector, titanium , pedicle hook, titanium , sub laminar hook, titanium , facet hook, titanium , percutaneus cannulated pedicle screw 4.5, 5.5, 6.5, 7.5 mm , titanium , percutaneus cannulated pedicle screws corresponding rod , titanium , pedical screw with break off plug , size 4.5, 5.5, 6.5, 7.5 dia length 20 70 mm , titanium , pedical screw with break off plug corresponding rod, titanium , hydroxy appetite ( ha ) coated pedicle screw 4.5, 5.5, 6.5, 7.5 mm, titanium , hydroxy appetite ( ha ) coated pedicle screw corresponding rod, titanium , reduction screws with break off plug for spondyloslithesis , titanium , pedicle screws 4.5, 5.5, 6.5, 7.5 mm ( poly axial ) , titanium , fenestrated pedicle screw for bone cement augmentation size 4.5, 5.5, 6.5, 7.5 mm, titanium , corresponding rod for fenestrated pedicle screw., titanium , corresponding rod for reduction screws with break off plug , titanium , trans formal lumber inter body fusion ( tlif ) peek cage size 26 mm, height 7 15mm , trans formal lumber inter body fusion ( tlif ) peek cage size 28 mm, height 7 – 16 mm , trans formal lumber inter body fusion ( tlif ) inter vertebral rotatable peek cage size 26 mm, height 7 15 mm , trans formal lumber inter body fusion ( tlif ) inter vertebral rotatable peek cage size 28 mm, height 7 15 mm , posterior lumber inter body fusion ( plif ) bullet shaped peek cage height 8 14mm , expandable peek cages with rachet system for cervical spine , expandable peek cages with rachet system for dorsal spine , expandable peek cages with rachet system for lumber spine , inter laminar peek spacer all sizes , inter laminar titanium spacer all sizes , vertebral staple single hole 5.5, 6.5, 7.5 mm dia. , vertebral staple double hole 12, 13, 14, 15 mm dia. , vertebro plasty kit: , kit should have low viscosity bone cement ( 25 gm ) and cement delivery system consists of one pressurizer, syringe, connector , suction cannula, cement mixing bowl and spatula and vertebral body puncture needle 3 mm x100 & 150 mm. , kypho plasty kit with two balloons ( digital ) kit should have digital device to inflate balloon showing pressure in psi & atm., inflatable balloon should bear pressure up to 400 psi. , hart schill sizes 100mm, 125mm, 150mm, 200mm, 250mm , sub laminar cable wire , ultrasonic blade for safe spine surgery bone scalpel all size , irrigation tube for bone scalpel ( disposable ) , autoclavable eschmarch bandage , 4 , autoclavable eschmarch bandage , 6 , skin marking pen, sterile , elastic nail ( tens ) , ender nails , hand drill , methylene blue marker...

Building Construction Department - Bihar

29363920 supply and installation work of furniture and other items in engineering college district. nawada 2021 22 1 ot d office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side one drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock. 2 2ss 2 seater sofa overall size 1130w x 700d x 785 h cm, seat height 43.5 cm side frame assembly: the side frame assembly is fitted to the two ends of the connecting beam assembly to form, the leg cum armrest assembly. it is made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick ms e.r.w. tube and powder coated ( dft 40 60 microns ). the ends are fitted with abs moulded end caps, 3. seatrest assembly:the seat rest assembly consists of a fabricated inner frame assembly insitu moulded high resilience (hr) polyurethane foam having density = 45 +/ 2 kg/m3 with hardness load 25 ± 2 kgf as per is:7888 for 25% compression of the foam. the complete moulded seat rest assembly is covered with a replaceable fabric upholstery cover *seat size: 52.0cm. (w) x 50.0cm. (d) x 6.0cm. (t), 4. backrest assembly:the backrest assembly is flexing type and consists of a fabricated inner frame assembly insitu moulded with high resilience (hr) polyurethane foam having density = 45 +1 2 kg/m3 with hardness load 14 ± 2 kgf as per is:7888 for 25% compression of the foam. the complete moulded backrest assembly is covered with a replaceable fabric upholstery cover. *back size: 52.0cm. (w) x 59.0cm. (h) x 6.0cm. (t), 5. adj. glides: the adj glide is injection moulded in black nylon & fitted to the front end of side frame assembly along with abs moulded adj. glide base to take care or unleveled floor surface 3 3ss 3 seater sofa the side frame assembly made of 38mm dia 2mm thick is fitted to the two ends of the connecting beam assembly to form the leg cum armrest assembly. it is made of a ms. e.r.w. tube duly powder coated. the ends are fitted with abs moulded end caps. tie member: it is the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members are used to connect the side frames. the tie member is made of ms. e.r.w. tube 40mmx40mm 2mm thick duly powder coated. the seat/back assemblies are mounted on the tie member. l bracket of 6mm thick steel connects the back to the tie member assembly. seat foam is of 45 +/ 5 kg/m3 and back foam is of 32 +/ 5 kg/m3 with hardness of 25+/ 2 on hampden m/c. at 25% compression of the foam. seat size 52cm widex50cm deep and back size 52 cm wide and 60cm high. back of the sofa flexes for additional comfort 1 seater –601mmwx700mmdx 810mmh, 3 seater –1640w x 700d x 785 h cm 4 3s wc 3 seater steel chair cross beammade of ms erw rectangular black powder coated tube of 80 x 40 x 2 mm leg & arm rest chrome plated made of cold rolled steel. arm rest & leg assembled to the cross beam with m10 x 100 mm bolts. seat & back 1.6mm thick powdercoated perforated shell of cold rolled ms sheet. side bar of chrome plated solid steel 30 x 12 mm (din 174) with flunting & plastic insert .the shell is assembled on the cross beam with help of m8 bolts the overall dimension is 1608mm (l) x 695mm (h) x 555mm (d), seat height : 405mm 5 wb a work bench of size 4’ x 3’, angle 1.5 x 1.5 with 2 pair of legs with work top with overall dimensions. 1200mm l x 900mm d x 950mm h, the worktop of mdf ext garde is12406 wood. max udl 1500kgs the worktop should be made of various layers of beech wood which are planed, glued and pressed together. this should make the work top non deformable, and load and wear resistant. this shall be covered with 4mm steel sheet. leg: the bench leg should be powder coated should be 80mm l x 1265mm d x 960mm h. back bracing for stability 6 cnt centre table of size 1200w x 600d x 378h built with the extremely durable rubberwood, the table can hold weight up to 25kgs. with a very suitable cappuccino color, the table will complement any style of décor. the tapered legs provide stable support. it’s free of flaws design can accommodate your books, magazines, laptop and coffee mugs, all at once. the well thought out dimensions of the table make it easier to position it anywhere in the house 7 wb b work bench of size 8’ x 4’ with 2 pair of legs with work top with overall dimensions. 2400mm l x 1200mm d x 950mm h, the worktop of mdf ext garde is12406 wood. max udl 1500kgs made of various layers of beech wood which are planed, glued and pressed together. this should make the work top non deformable, and load and wear resistant. bench leg: the bench leg should be powder coated should be 80mm l x 1265mm d x 960mm h. back bracing for stability 8 ec cu executive chair with cushioned seat is made of injection molded plastic outer & inner. plastic inner is upholstered with stitched cover and moulded high resilience polyurethane foam of density 4542 kg/m*,and hardness load 16 + 2 kgf as per 15:7888 for 25% compression.the stitched cover is made from spacer fabric and leatherette seat size : 47.0 cm. (w) x 48.0 cm. (d), tunular frame : the powder coated (dft 40 60 micron) tubular frame is cantilever type & made of 02.5440.03 cm x 0.240.016 cm thk ms erw tube.the back connected to frame through powder coated (dft 40 60 micron) high pressure die cast connector. 9 oc a office chair with seat and back are made from seasoned wood and plywood. the same is upholstered with black synthetic leather and polyurethane foam. back size 46.0cm(w)x27.0cm(h). seat size 46.0cm(w)x40.0cm(h). the armrest is gas assisted injection moulded from black polypropylene. the understructure assembly is a cantilever type frame.width of the chair 58cm, depth 56.5cm,height 87.5cm,seat height 48cm. 10 oc b office chair : the seat and back are made up of 1.2 ±0.1cm. thick hot pressed plywood measured as per qa method described in ocp qlta p14 18 and upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam is designed with contoured lumbar support for extra comfort. back size 49.0 cm. (w) x 47.0 cm. (h) , seat size 49.0 cm. (w) x 44.0 cm. (id) high resilience (hr) polyurethane foam: the hr polyurethane foam is moulded with density = 45 ±2 kg/m3 and hardness load 16 ± 2 kgf as per is:7888 for 25% compression. 11 pc principal chair: the seat is made up of 1.4± 0.1 chick hot press 4 plywood upholstered with fabric and moulded polyurethane foam. it has a seat depth adjustment of 5.0±0.3 cm integrated in the seat through a sliding mechanism. seat size: 50.0cm (w)x 49.0cm(d).the back is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustable lumbar support made of injection moulded polypropylene having an adjustment of 6.0±0.1cm.backsize: 50.0cm(w) x68.0 cm(h).the polyurethane foam for seat is of density 55± 5kg/m3. it is made of glass filled polyamide arm structure with pu arm top and height adjustment of 7.0 ±0.5cm.the arm top has swivel and to for movements. to for movement is 6.0± 0.5cm.the inner tube of armrest is chrome plated. the mechanism is designed with the following features:• 360° revolving type.• centre tilt synchro• 3 position (including upright lock) giving option of variable tilt angle to the chair with anti shock feature. the headrest is injection moulded din glass filled polypropylene which is upholstered with foam and fabric has an adjustment of 6.0± 0.1cm & its assembled over the full back chair. the pneumatic height adjustment is chrome plated with an adjustment stroke of 9.0 ± 0.3cm.the pedestal is high pressure die cast polished aluminum and fitted with 5 nos. twin wheel castors. the pedestal is 65.0±0.5 cm p.c.d. the twin wheel castors are injection moulded in black glass filled polyamide having 6.0±0.1cm wheel diameter. the chrome plated tubular frame is made of día2.8±0.03cm x0.2±0.02 cm the m.s. round tube. the frame is fitted with plastic caps made of injection moulded glass filled polypropylene. 75(w)* 75(d)* 115 130(h)* 44.5 53.5(sh). 12 cc wa computer chair with seat and back are made uo injection moulded high impact strenght polypropylene polymer compound with indoor graade uv resistance.the tubular weled frame is made from dia2.22 +/ 0.03cmx 0.12+/ 0.0128 cm and 3.5+/ 0.03 cm x 0.12+/ 0.0128 am stainless steel 202 grade tube.the tube are buff polished to give shiny finish. cm. the shoes are made of high impact strenght polypropylene polymer. compond with indoor grad uv resistance and pressed fitted with tubularfram. size : (w)52.5cm*(d)55.8cm*(h)84.5cm*(seat h) 45.0 cmseat size 52.5cm(w)*53.2 cm(d) back size 51.6 cm(w)*40.5 cm (h). 13 oc c office chair mid back pneumatic height adjustment cushioned revolving chair made up of 1.2cm thick hot pressed ply wood seat & back upholstered with fabric with moulded polyurethane foam together with moulded abs seat & back integral skin polyurethane with reinforced with m.s. insert. the tilt mechanism adjustment upright locking, 360 degree revolving type fitted with 05 nos. twin wheel castor dia 5 cm. 14 comr compactor on 12 feet rail length moves on rails. the cabinet body rigid knock down construction made of 0.8 thick crca steel eonforming to is: 513 gld. body units are bolted to undercarriage. optimizer height from ground is 2081] mm (1930 hody+ 65 under 35 channel systems] finish: — the bodies inciuding shelves are given anti rust surface treatment 8‘ are powder coated with epoxy polyester powder oven backed with a controlled temperature of 130 deg. to 200 deg. c.sheif:l made of 0.8 thick crca steel conforming to is;513 gd. max load bearing capacin is fit! kg. udl per ahett x 5:400 kg. eauh cabinet. undercarriage: the undercarriage is a welded trams made of hr sheet 3.15 mm thick conforming [0 is; 1d?48movement of the system: push pull configuration {type p utype f~2} movement of units achieved pushing or putting chrome plated 0 handle fitted suitable height on one side at body. 15 cnft conference table of 30 seater capacity shall be an eco modular conference table enables various configurations to suit different conference rooms. it is made of particle board and has wire management facilities for uncluttered wiring. it has profiled legs with twin colored modesty for better looks, double 1350.0wx 600.0dx 750.0h, work surface top thickness is 25mm plb with pvc beading allover, legs modesty wire manager made from 18mm thick plt having curved profile.made from plt (prelaminated twin) boards 18mm thick in two shades. a wire manager running along the width of desk fitted on the modesty panel from inside. 16 cort corner table of size 530w x 450d x 450h built with the extremely durable rubberwood, with a very suitable cappuccino color, the table will complement any style of décor. the tapered legs provide stable support. it’s free of flaws design can accommodate your books, magazines, laptop and coffee mugs, all at once. the well thought out dimensions of the table make it easier to position it anywhere in the house. 17 dt a dining table of 8 seater with wire manager of size 2400w * 1200d * 750h h top all tops are made from 25mm thick pre—laminated board with 2mm thick. pvc edge beading side panel all side panels are made from 25mm thick pre—laminated twin with 2mm thick pvc lipping of same color on sides and 0.8mm pvc lipping of matching color on the bottom curve, modesty these panels are made from 18mm thick pre laminated board with 0.8mm pvc lipping of matching color, access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical/data voice. sockets from top, powder coated switch mounting tray made from 0.8mm and 1.2mm m.s sheet. switches to be mounted on tray as per requirement. provision for mounting 8 — module anchor roma switch plate on switch mounting tray. wire manager rehau made from rau pvc 1309/7558 (black color). 18 fct file cabinet with 4 drawer width: 470mm, height: 1320mm, depth: 620mm , rigid knockdown construction, material: top, side & drawer frontmade from0.7mm thk **crca, drawer inside cover, side back side made from0.6mmthk **crca, back, bottom, drawer bottommade from 0.5mmthk **crca, **crcasteel confirming to is 513, grade d, label holder snap on type plastic label holder on drawer fronts, locking & anti tipping arrangement centralized lockingwith camlock& having antitipping arrangement to ensure that when one ,drawer is opened for use, it does not allow other drawers to be opened, finish epoxy polyester powder coated to the thickness of 50 microns (+/ 10). 19 fp cbnt fire proof cabinet shall be designed to protect the contents (paper media documents) against the fire hazard.shell: the external shell of the cabinet shall be of steel of minimum 2 mm thick and internal shell of steel of 1.6 mm thick, both conforming to is 513. further fortified by suitable in situ insulating fire resistant barriers to meet the required protection. the overall protection to the contents shall be minimum 70 mm on all six sides. door: the external door of the cabinet shall be of steel of minimum 2 mm thick conforming is 513 and further fortified with hard plate over the lock for burglary protection and in situ insulating fire resistant barrier material to meet required fire protection.  bolt work: the door shall be secured by four way locking mechanism / bolt work with minimum 8 moving shooting bolts of 20 mm diameter. door & body fitment: the door fits in the cabinet having tongue and groove construction that stops hot gases and high temperature to pass through and withstand temperature up to 1010 deg.c. locking: the frrc shall be equipped with a dual control high precision key lock of minimum six levers. the lock body shall be of zinc alloy and the levers in the lock shall be of brass conforming to is 410. there shall not be any dummy lever in the lock. the storage capacity shall be minimum 650 liters with minimum usable internal sizes in mm as 1620 (h) x 670 (w) x 599 (d).the cabinet shall be provided with minimum four nos. adjustable shelves. 20 oc d office chair with seat/back assembly: the cushioned seat assembly consists of seat base moulded in glass filled poly amide, moulded polyurethane foam & upholstered with high stretch knitted polyester fabric. the cushioned back assembly consists of back inner moulded in polypropylene in situ moulded with polyurethane foam & upholstered with high stretch knitted polyester fabric. back size : 45.5 cm. (/1/) x 53.0 cm. (h) seat size : 48.5 cm. (w) x 49.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam used in seat and back cushion is moulded in density min 48 kg/m3, and hardness load 15 ± 2 kgf as per is:7888 for 25% compression. tilt mechanism, spines & spine connector: the seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. the cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. the s shaped spines moulded in high strength glass filled poly amide and the spine connector moulded in glass filled poly amide form the back spine structure involved in multi dimensional recline motion. the variable tilt angle recline motion can be adjusted with 3 position tilt limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. adjustable armrests: the assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled poly amide: the height adjustment feature should be button operated having adjustment of 6.6±0.5cm. the armrest top should be made up of integral skin pu moulded over plastic inner moulded in glass filled poly amide. pneumatic height adjustment: the seating height can be adjusted with a pneumatic gas lift having an adjustment stroke of 9.2 ± 0.3 cm pedestal assembly: the pedestal should be injection moulded in glass filled poly amide and fitted with 5 nos. twin wheel castors. the pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors twin wheel castors :5 nos. twin wheel castos are injection moulded in poly amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal. 21 ht hod table of size 1500 x 750 x 743 understructure: the understructure is in prelam panels, made with plt boards.drawer storage units with different combinations to support tops, made with 18mmplt boards of different colours. modesty and back panels, made with 18mm plt boards. the pedestals/storages are fitted with necessary locks plt board tops (straight edges): wenge and savannah maple plt board used for making tops. pvc membrane tops (with profiles): 22 jdb job display board with dimensions (1200x900x150)mm board having 9 mm ply 23 tdb tool display board (1200x900x150)mm board having 9 mm ply 24 lt chem chemistry lab table of size 4130mm x 1540mm x 900mm with pp drop sink of size 560 x 355, single tap deck mounted 8 swing goose neck, ss peg board 550x420x55 with 25 pegs. two reagent shelves of width 1050 with glass shelf. c frames all cframes assemblies should be manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 (indian standard specification for steel tubes for furniture) and all sheet metal components should be of crca confirming to is code 513:1994. the suspended under bench welded units should be supported on heavy duty steel frames fully carrying the load of worktops. c frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. the c frame shall also have skirting at back bottom side. horizontal members should be made from rectangular pipes of 2mm thickness. 25 lt n lab table of size 4130mm x 1540mm x 900mm frames all cframes assemblies should be manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 (indian standard specification for steel tubes for furniture) and all sheet metal components should be of crca confirming to is code 513:1994. the suspended under bench welded units should be supported on heavy duty steel frames fully carrying the load of worktops. c frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. the c frame shall also have skirting at back bottom side. horizontal members should be made from rectangular pipes of 2mm thickness. cross sectional dimensions of the pipe should be 60 x 30 x 2 mm. 26 lu 4d locker unit with 4 door plu + lkr (base) with stand size 1830hx380wx450d, stackibilit the add on units can be stacked width wise to formbank of lockers having common side panel, locking cam lock with lock leveroption of hasp arrangement, material crca 0.6mmthickness, rigid knockdown construction, shelf uniformly distributed load capacity per each shelf level is 35 kg maximum, hat self 4 door model at the top, finish epoxy polyester powder coated to the thickness of 50 microns (+/ 10).ventilation attractive punched pattern for ventilation 27 lt b long table of size 1800 x 900 x 740 worktop 25 mm thick plb tops with 2mm thick pvc edge beading understructure c – frames legs 1.6 mm thick m.s c­frame supporting the top. legs dia. 38.1 x 1.6 mm thick m.s erw tube. 28 dt b meeting table with 10 seater with wire manager of size 2400w * 1200d * 750h h top all tops are made from 25mm thick pre—laminated board with 2mm thick. pvc edge beading side panel all side panels are made from 25mm thick pre—laminated twin with 2mm thick pvc lipping of same color on sides and 0.8mm pvc lipping of matching color on the bottom curve, modesty these panels are made from 18mm thick pre laminated board with 0.8mm pvc lipping of matching color, access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical/data voice. sockets from top, powder coated switch mounting tray made from 0.8mm and 1.2mm m.s sheet. switches to be mounted on tray as per requirement. provision for mounting 8 — module anchor roma switch plate on switch mounting tray. wire manager rehau made from rau pvc 1309/7558 (black color) 29 nb notice board with size 4 x 3 surface material woolen felt / fabric in various colours,core material 9 mm thick soft board,backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour or 0.16 to 0.25 mm thick isi mark gp sheet,aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness 30 rt da reception table double arch with dl top of size 2410 x 1065 x 725 worksurface, 1035 counter, d l top top clean matt pu finish 18mm thick inside radius 700.0 mm outside radius – 1350.0 mm depth – 650 mm glass frosted glass 10mm thick diamond cut finishing on edges inside radius – 1202.5mm outside radius – 1402.5mm depth – 200mm, modesty panel ms perforated sheet below worksurface : 0.8 mm (thick) x 665.0 mm (height) x 1345.0 mm (flat length) above worksurface : 0.8mm (thick) x 260 mm (height) x 1345.0 mm (flat length), legs ms tube 1.6 mm thick diameter 50.8 mm height 604 mm. 31 wb s non magnetic small white board 4 x 3 surface material 0.62 to 0.72 mm thick laminate sheet with extra melamine surface,core material 8 mm thick particle board,backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour,aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness. 32 s al steel almirah of size 1981 x 916 x 486 mm multi bend construction and inter locking design and full length over apping doors and sides. three way bolting mechanism. spot welding & co2 welding. anticorrosion treated components, oven baked powder coating process. material thickness 0.9mm.top, bottom,lh & rh sides and back material thickness= 0.9mm,removable rh & lh main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm 33 sr a steel rack of size 6x36x18 with six shelves prime quality crc sheet conforming to is 513d/10748/5986. the pitches of the slots at 19.05 mm, panel/shelves: 6 bnd bending process of 905l x 448d of load capacity 80 kgs. udl max per shelf. shelf material 0.8 mm thick ms sheet conforming to commercial quality cr 1, grade 340 of is 513, angle posts material and size rolled steel angle posts of 40 x 40 x 1.8 mm, m s sheet thickness of shelves and back (minimum) in mm 0.8, paint powder coated with lead free paint. 34 ls lab stool of circular type 30.0 +/ 0.5 cm and made up of 0.1+/ 0.012 cm thk cr steel. it is welded to the understructure and black powder coated ( dft 40 60 microns ). understructure assembly: the understructure is made of ms tube 2.2 +/ 0.03 cm x 0.16+/ 0.0128 cm thk ms erw tube. lt is welded ti the ms fabricated circular seat assembly and black powder coated ( dft 40 60 microns ). the understructure is provided with black pp injection moulded ferrules. 35 sr b steel rack of size 2 6x36x18 with three shelves prime quality crc sheet conforming to is 513d/10748/5986. the pitches of the slots at 19.05 mm, panel/shelves: 6 bnd bending process of 905l x 448d of load capacity 80 kgs. udl max per shelf. shelf material 0.8 mm thick ms sheet conforming to commercial quality cr 1, grade 340 of is 513, angle posts material and size rolled steel angle posts of 40 x 40 x 1.8 mm, m s sheet thickness of shelves and back (minimum) in mm 0.8, paint powder coated with lead free paint. 36 ot a office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side three drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock. 37 ct computer table of size 600w x 450d x 750h mm compact and easy to use . top made up of 1.5 cm medium density fiber. all the other panels are made of particle board. vacuum lamination of pvc has been done on the table to surface. 0.4mm lapping is used for all the other panels 38 ot b office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18 mm thick pre laminated top size 1365 x 680 x 735 (approx.) with both side drawer unit one side three drawers & another side two drawers made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with both side drawer lock 39 pt principal table main desk of size 1800 x 900 x 740, eru of size 1550 x 450 x 705 made up of top 25 mm thick plain particle board (ppb) clad with 0.6mm thick post formed laminate and 1mm thick backing laminate (bdl). flat edge duly sealed with 2mm thick pvc beading., modesty 18mm thick plain particle board (ppb) clad with 1.0mm thick decorative laminate (dl) on both sides. edge sealed with 2mm thick pvc beading with 01 no. 3 drawers free standing pedestal. 40 ot c office table with eru & pedestal of size 1350 x 750 x 750 mm + eru + pedestel main desk of size 1350 x 750 x 750 with eru of size 1200 x 450 x 750 & 01 no. 3 drawers pedestal: top panel made from 25 ±0.5 mm thk pre laminated boards as per is 12823 with 2 mm thick pvc beading on all sides. side panel the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm pvc beading on all sides. modestty 1 & 2 the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm thick pvc beading on all edges. the panel is made from 25 ±0.5 mm thk pre laminated boards as per is 12823 with 2 mm thick pvc beading on all sides, the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm pvc beading on all sides. the panel is made from 18 ±0,5 mm thk pre laminated boards as per is 12823 with 0.8 mm thick pvc beading on all edges. pedestal wooden panel ( 1 box+ 1 filling) back wooden panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with pvc beading on all sides. the panel is made from 9 ±0.5 mm thk pre laminated board. 41 sstp steel table with stainless steel top of size 1180 x 750 x 750. worktop the top is in stainless steel brushed finish with plb insert for durability. easy to clean and maintain hygiene. side frames made from 30mm x 30mm x 1.5mm thick m.s powder coated tubes at base which are welded and are fixed to top with screws. the bottom ends are closed with plastic buffers. ms shade : s/g metallic dark grey (nerocoat 9000626), cross member made from 30mm x 30mm x 1.5mm thick m.s powder coated tube, which is welded and bolted to side frames. 42 tp a teaching platform with the dimensions of length 6 ft x breadth 4 ft x height 1.5 ft with 19 mm plywood on top, shall be rectangular hallow box shape without legs. 43 tp b teaching platform with the dimensions of length 12 ft x breadth 6 ft x height 1.5 ft with 19 mm plywood on top, shall be rectangular hallow box shape without legs. 44 pod wooden podium with dimensions: 45 h x 20 w x 15 d to 50 h x 25 w x 20 dpresenter side height: 40 to 45shelves: 20 h x 20 w x 10 d to 25 h x 25 w x 12 dproduct weight: 50 to 55 lbs.shipping weight: 65 to 70 lbs.material: scratch resistant high pressure laminate.the top of the table shall be provided 19 mm ost. the table shall be neatly finished and polished. 45 smchr seminar chair with understructures could be revolving or fixed type as per need. option of hinge type and retractable desk let.desklet 100% voc free powder coating knock down design reducing transportation emissions designed for long life 46 ot e office table of size 900 x 590 x 750 made of ms erw square tube 18 mm x 25mm x 1.2mm thick with pre laminated top size 1199 x 590 x 750 mm thick with single side one drawers, drawer unit made of .5mm thick ms crca sheet, all steel components have powder coated paint 47 wb l non magnetic long white board 8 x 4 size and surface material 0.62 to 0.72 mm thick laminate sheet with extra melamine surface,core material 8 mm thick particle board,backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour,aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness. 48 bkrk a double sided book rack with the dimensions width 900mm, height: 1850mm, depth: 600mm, rigid knockdown construction. construction, material crca0.8mmthickness, finish epoxypolyester powder coated to the thickness of 50 microns (+/ 10).number of adjustable shelf: five adjustable shelves on one side (total 12 loading levels). uniformlydistributed load capacity per each shelf is 80 kgmaximum. label holder & range indicator label holder & range indicator on eachmain unit for inserting labels. 49 bkrk b single sided book rack with the dimensions width 900mm, height: 1850mm, depth: 316mm, rigid knockdown construction, material crca 0.8 mm thickness,finish: epoxypolyester powder coated to the thickness of 50 microns (+/ 10).,number of adjustable shelf five adjustable shelves. (total 6 loading levels). uniformlydistributed load capacity per each shelf is 80 kg maximum, label holder & range indicator label holder & range indicator on eachmain unit for inserting labels. 50 m r magazine rack with overall dimensions of all steel periodical display rack shall be 900mm(w)x450mm(d)x1830mm(h). rigid knockdown construction ,panels shall be made from crca 0.6 mm thick and front frame shall be made from crca 0.8 mm thick . crca d grade as per is 513 . there shall be 5 level racks , display tray shall be suitable for fullscape size magazines,periodicals, aesthetically appealing metal tray at an angle for easy viewing . receding facility to access the storage behind . sliding on plastic rollers . behind storage shelving each of 5 level has a behind storage shelf . uniformly distributed load capacity per each shelf is 40 kg . leveler shall be screw type with hex plastic base and finish shall be epoxy polyester powder coated to the thickness of 50 microns. 51 glsd almirah with glass door size 916mm(w) x 486mm(d) x 1980mm #(h) # excluding leveler, construction & material • welded construction, • 0.7mm thk (±0.07mm) crca* for shelf,• 0.8mm thk (±0.08mm) high yield strength crca** for doors and back,• 0.9mm thk (±0.08mm) crca* for all other components,crca ‘d’ grade as per is:513,crca ‘d’ grade high yield strength as per is:513,locking & handle • brass handle with • two way locking mechanism with shooting bolt, shelves • height wise adjustable shelf mounting • uniformly distributed load capacity per each full shelf is 40 kg maximum, • 4nos. of adjustable full shelf, • box file a4 size (85wx345hx285d) can be stored vertically on three shelves and the clear space above fourth shelf is 240mm,• m10 screw type leveler with hex plastic base,finish • epoxy powder coated to the thickness of 50 microns (+ 10). 52 dd dual desk is specially designed for rugged use with overall dimentions of l1054 x w980 x h760 mm and all edges are fillet. the desk is made of pressed formed ms crca section & crca tube fitted with pre laminated particle board top, seat & back with injection molded ppcp edge. hanger for water bottle and bag. space for keeping pen, pencil and scale. the overall appearance of the product shall be as per photograph.top injection molded ppcp edge. size : 1054x450x18 mm thk. particle board.seat injection molded ppcp edge. seat height : 450 mm , seat size : 1054x304x18 mm thk. particle board.back injection molded ppcp edge. back size : 1054x154x18 mm thk. particle board.shelf shelf 0.8 mm thk. crca sheet. bullnose front edge with stiffner 1 mm thk crca.modesty modesty 0.8 mm thk. crca sheet. slot perforated.tie members horizontal tie members 25x25x1.2 mm thk. crca pipe.footrest footrest pressed formed crca section 1.5 mm thk. side frame side frame c section pressed formed 1 mm thk.crca sheet welded with 25x50x1.2 mm thk tube. and back rest pipe ø25 x 1.2 mm thk. top end rounded.cap & levellers all pipe caps are curved ppcp material.finish all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. 53 split ac split air conditioner with 1.5 tonne capacity, star rating 5 star, cooling capacity (kw/hr):above 3000 (kw/hr),roatart type compressor,compressor warranty 10 years , air circulation ( cfm h/m/l) above 450 /350/300, moistur remover(l /hr) above 1.5, idu noise level (dba ≤55/50/45,control microprocessor control codeless remort power source (v/hz/φ 230/50/1,display led/lcd, voltage stabelizer wall mount type with time delay high and low voltage and thermal overaload protection, capacity 4 kva, input voltage 130 to 300 voltage output voltage 200 to 240 v , high voltage cutoff, efficiency ≥ 95%, frequency 50 hz. 54 gntr c generator with an ouput capacity of 100 to 125 kva 55 drs t dressing table of size 460w x 486d x 1710h mm , mirror w x h: 362 mm x 1156 mm dressing table comes with a long mirror, two storage drawers, and a stool. available in wenge color, the dresser is crafted from good quality mdf wood, making it sturdy and lasting. the shelves of this stylish dressing table can be used to keep items like perfume bottles, hair products, and medicines, for that clutter free look. the stool, also wenge color with an orange colored cushion, offers comfortable seating, while the full length mirror is perfect to dress up, and check your overall ensemble. 56 s al m steel almirah with mirror of size 900w x 507d x 1950h mm rafted from prime steel, your slimline cupboard will be resistant to corrosion and peststhis cupboard comes with 2 easily adjustable shelvesthe hanging rod inside the cupboard ensures ample space for your daily wear, suits, sarees and/or dressesknock down construction makes shifting and handling of slimline easieravailable with over head unit option to maximize vertical space usage you can also choose to have a mirror with slimlinestylish snap shut flush handle enhances slimline’s aesthetics. 57 audi c auditorium chair seat/back assembly: the seat and back are made up of 1.2±0.1 cm. thick hot pressed plywood measured as per qa method described in ocp qlta p14 18 and upholstered with fabric and moulded polyurethane foam. the back is, flexing type.back size 47.0 cm. (w) x 51.0 cm. (h), seat size 47.0 cm. (w) x 47.0 cm. (d). 2. high resilience (hr) polyurethane foam: the hr polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf as per is:7888 for 25% compression.3. armrests :the one piece armrests are made of black integral skin polyurethane foam with 50 70 shore hardness and reinforced with m.s. insert. the armrests are scratch and weather resistant.5. understructure assembly: it is made of dia. 2.54±0.03cm. x 0.2±0.016cm. thk. m.s.e.r.w. tube with connecting strips made of 0.5 ± 0.05 cm. thk. hr steel welded to it for holding the seat. the assembly is powder coated ( dft 40 60 microns ).the auditorium chair is designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre requisite godrej doc no: stg 129368.overall width 57.0, depth 57.0, height 86.0, seat height 44.0 cm. 58 ss mc movable chair made out of stainless steel, understructure seat and back are made up of injection moulded high impact strength polypropylene polymer compound with indoor grade uv resistance *seat size: 52.5 cm. (w) x 53.2 cm. (d), * back size : 51.6 cm. (w) x 40.5 cm. (h) .s.s. understructure: the tubular welded frame is made from dia 2.22 ± 0.03 cm x o.12 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.12 ± 0.0128 cm stainless steel 202 grade tube. the tubes are buff polished to give shiny finish. ...

Eastern Railways - Bihar

25587412 supply of , glass size 1040x660x6 to drg.no. 1wd20cr 4.03/jmp alt 2, material is 2553 /pt 1/1990, front window glass pane 740x640x6 to drg.no. 1wd20cr 4.03/jmp,alt 2,material is 2553 pt 1/1990, rear window glass pane 840x590x6 to drg.no.1wd20cr 4.03/jmp,alt 2 material is 2553/pt. 1/1990, sliding door window glass 260x485 to drg.no. 1wd20cr 4.03/jmp,alt 2 with aluminium frame to suit cabin frame, material is 2553/pt. 1/1990, rubber profile with seal to drg.no. 1wd20cr 4.03/jmp, alt 2 , material rubber...

Eastern Railways - Bihar

23915916 supply of , printed hanging non magnetic white board with light weight aluminium frame (writing grade melamine surface marker sheet as per is:2046/1997) size and matter will be given by sse/dps/jmpw, printed hanging non magnetic white board with light weight aluminium frame (writing grade melamine surface marker sheet as per is:2046/1997) size and matter will be given by sse/tms/jmpw...

Central Organisation Railway Electrification - Bihar

23564450 supply of shock treatment chart, shock treatment chart as per actm on laminated white sunmica board 12 mm computerized printing on vinyl sheet standard around aluminum frame with hanging arrangement. (size of individual chart is 3x2)total sqft 100 no.x6 sqft = 600 sqft....

Indian Institute Of Technology - Bihar

21030248 tender for re fixing of old aluminum frame with new partly glazed and partly nova pan pre laminated particle board at workshop a for transport engineering lab...

Kendriya Vidyalaya - Bihar

18908147 tender for civil repair and tiles fitting work, glass / fiber fabrication work in aluminum frame, fixing of barbed wire on boundary wall, construction of roof on stage, painting white washing work...

SBI Infra Management Solutions Private Limited - Bihar

18426714 tender for proposed interior furnishing work aluminum frame and glass and aluminum partition , full height partition partly paneled and partlly glazed with doors and hard wood chaukhat as per the requirement , full height non glazed partition , supplying and fixing following accessories to doors , work stations / tables , rcc work , steel reinforcement for all rcc works , plastering , painting , vitrified flooring , vitrified tiles , ceramic floor tiles(anti skid) , aluminium extrusion sections , laminates , plywood/block board , drawer sliding fittings , paints , cement paint , acrylic emulsion paint , glazing , vertical/roller blinds , water proofing make...

Indian Army - Bihar

17738973 supply of ulpo for pack with alluminium frame, q / 1754 / lp / 07 dt 05 oct 2018...

Indian Army - Bihar

17580612 supply of ulpo for pack with alluminium frame and pouch ammunition, ...

Building Construction Department - Bihar

15467289 tender for providing and fixing veneer wood plastic composite panelling up to specified height with century/green ply over 12 mm thick wpl board of aistome/equivalent make roller aluminium frame of 25x40 mm post at 6 cm centre and 25x40 mm horizontal make and 60cm centre including cost of anchor of the panelling to wall properly including t.w. upping on the top etc all complete as per direction of eli....

East Central Railway - Bihar

11564357 making and supply of laminated white sunmica board 12 mm. compuerized printing on vinyl sheet with standard around aluminium frame for uts and prs counter at pnbe ,rjpb,ppta,cti/bxr,ara and cti/kg section all station 1 2 feet x 2 feet 4 sq.ft x 73 pc 292 sq.ft 2 2 feet x 1 feet 2 sq.feet x 46 pc 92 sq.ft. 3 1 feet x 1 feet 1 sq.ft. x 57 pc. 57 sq.ft. note sample can be seen in the office of sr.dcm/dnr....

East Central Railway - Bihar

9600155 stretchers as per st. john ambulance type light weight aluminium frame with all necessary fitting are essential for armv/danapur.practical scooping stretchers which makes it possible to put the stretcher under the patient without moving him/her/much. it is essential for the loading trauma patient by two rescuers with use of this device patient can be piked up without changing position and the trunk and limbs can maintain the spine position while loading.technical specification: 1 lenght of the stretcher poles 2.15 meters aluminium pipe . 2 length of the strecher canvas 1.75 meters. 3 width from inside pole to pole 48cm. 4 proper provision to beprovided for moving in the rail channel by means of wheel. 5 metal alloy pole to be provided with rubber handle grip at four corners. 6 thickness of the folding metal spreaders should be 5mm and width should be 25 mm. 7 stretchers should have two belts/ straps with pvc instantaneous lock of 50 mm width at chest and knee level with well crow for remaining strap....

Military Engineer Services - Bihar

8563696 special repair of damaged false ceiling panels as well as frames deteriorated walls due to water seepage 3 aluminum frame door and toilet at bodhistva hall of trg bn and repair and maintenance of street lights security lights etc at ota under ge gaya...

East Central Railway - Bihar

7971502 supply of stretchers st john ambulance type light weight aluminium frame with all necessary fitting....

Indian Council Of Agricultural Research - Bihar

6497193 supply & installation of fan and pad cooling system in the aeroponic system at cprs, patna pad size 1500 mm x 100 mm thick with aluminium frame water storage pvc water tank 500 ltr cap. pump 1 hp ( qty 2 nos ) fan axial fan. ( belt driven ) 2 nos size 40 fan speed 500 rpm...

Bihar State Housing Board - Bihar

5781291 construction of canteen in complex with aluminum frame work in main building wall, room block & verandah & repair work of room....

Road Construction Department - Bihar

5658108 renovation work of residence of s.e., n.b.c., muzaffarpur including electrification work and partitioning by aluminium frame of estimating section and raising of back side campus of circle office for the year 2013 14...