breathing apparatus Tenders in Bihar

10
Indian Air Force - Bihar

32433001 bids are invited for fire breathing apparatus ( scba en 137 ) auto extension if any seller submits price in last 15 minutes, the rawill be auto extended by 15 minutes. ( a maximum of10 times ) mse exemption for turnover yesstartup exemption for turnover yes1. if the bidder is a micro or small enterprise as per latest definitions under msme rules, the biddershall be exempted from the requirement of bidder turnover criteria and total quantity : 4...

Due Date : May 30, 2022

Tender Value : ₹ Ref. Documents

View Tender
11
Indian Air Force - Bihar

32310031 bids are invited for fire breathing apparatus (scba en 137) (q3)mse exemption for turnover yesstartup exemption for turnover yesbid to ra enabled yesra qualification rule 50% lowest priced technically qualified bidders total quantity : 4...

Due Date : May 27, 2022

Tender Value : ₹ Ref. Documents

View Tender
13
Department Of Fertilizers - Bihar

29972064 bids are invited for hand gloves woolen knitted (q3) , protective eye goggles (mha) (q3) , chemical splash proof goggle (q3) , ear muffs (q3) , fall arrestor (q3) , industrial and protective rubber knee and ankle boots as per is: 5557 (q3) , full body safety harness as per en 361 2002 (png) (q2) , arc flash suit (q3) , fire proximity suit (q2) , caution/ crime scene tape (q3) , industrial safety gloves leather and cotton(q3) , digital light meter (q3) , fire breathing apparatus(scba en 137) (q3) , megaphone (iocl) (q3) , multi gasdetector (q2) , multi gas detector (lel,o2,h2s &co/nh3/so2/c12 level) with pump combustible sensordetector(catalytic type) as per iocl (q2) , ear protectors is:9162 (q4) total quantity : 5791...

Due Date : November 30, 2021

Tender Value : ₹ Ref. Documents

View Tender
14
Ministry Of Petroleum And Natural Gas - Bihar

29897770 bids are invited for fire breathing apparatus (scba is 10245 part 2 ) (q3) , 75 kg (nominal charge) capacity wheeled mounted dcp fire extinguisher conforming to bis 16018:2012 (latest amendment) (png) (q4) , portable fire extinguishers as per is 15683 (2018) (q2) , 25 kg (nominal charge) capacity wheeled mounted dcp fire extinguisher conforming to bis 16018:2012 (latest amendment) (png) (q4) , advance firemonitor (fire sprinkler systems) (q3) , fire safety first aidwater gel blankets (q3) , fire hose (type 2) withinstantaneous male / female coupling (png) (q2) , handheld search light (q3) , fire proximity suit (q2) , scbaspare cylinder capacity 6.8 lts (q3) total quantity : 123...

Due Date : December 07, 2021

Tender Value : ₹ Ref. Documents

View Tender
15
Ministry Of Power - Bihar

28728030 bids are invited for fire breathing apparatus (scba en 137) , high pressure breathing air compressor motor driven as per is 15879 , dry chemical powder (mono ammonium phosphate base with map 90 % (type b)) , inherent fire retardantoverall for firefighting and rescue purpose ( protectivecoveralls) total quantity : 63...

Due Date : August 27, 2021

Tender Value : ₹ 15.78 Lakhs

View Tender
17
Indian Oil Corporation Limited - Bihar

28295436 maintenance and servicing of fire fighting equipments and systems in bkpl , group a bkpl barauni pump station , checking , inspection , servicing and maintenance of fire fighting system , equipments hydrants , extinguishers of all type ( dcp/co2/clean agent ) , water monitor up to the mark as per oisd/isi standards to provide & best functioning of the equipments always in best healthy condition inclusive of periodically cleaning , checking /inspection/oiling/ greasing of assemblies such as coupling , nozzles , valves , hydrants , extinguishers , hose pipes , water monitor , compounds drums , nozzles foam bunch , hose boxes , sand buckets etc , updating the data & identification tags , recording the status of checking in history register etc . as directed by the engineers in charge with all labors , carriages , materials etc . complete inclusive of all taxes . ( inspection and servicing of the equipment/fire fighting facilities is to be done periodically as mentioned against each ) : , fire hydrants ( double headed ) on monthly basis , fire extinguishers of all types & capacities on monthly basis , hose boxes monthly basis , valves of fire line of all sizes including contractor supplied grease of suitable quality on monthly basis . , foam /water monitors on monthly basis/mefg , sand buckets with stands with all bucket on monthly basis , taking delivery and refilling the extinguishers of various sizes /capabilities including supply of dry chemical powder , co2 gas etc updating the data & identification tags , recording the status of checking in history register etc as per isi standard and replacing the same as directed by engineer in charge . ( the co2 cylinder may to be taken out and delivered back within 10 days after re filling /repairing . however fire extinguishers co2 are to be supplied /kept temporary in place of each fire extinguisher for which taking out for re filling /repairing is required ) . , dry chemical powder , 0 . 2 kg dcp cartridge , 2 kg co2 cylinder , 6 . 8 kg co2 cylinder , 2kg clean agent cylinder , supply and replacing the spares /assembles etc of the fire fighting equipments system for all sizes / capacities as per isi standard and approved make with all labours , materials , carriages , inclusive of all taxes etc . complete , supply and installation of clear pvc , spiral wound hose ( pick up tube ) of length 3 m length and dia 40 mm with ss jublee clamp for tightningsuitable for existing connectors of 750 gpm monitor , hydrants sheet washer/rubber including fitting at site . , hydrants coupling washer , rubber washer for extinguisher , co2 safety valves 155kgf/cm2 , co2 safety pins , isi marked discharge pipe with horn for 2kg , 3 . 2kg , 4 . 5kg co2extinguishers , isi marked discharge pipe with horn for 6 . 5 kg and 6 . 8kg co2 exitinguishers . , rubber gasket of dcp main cap , hose plunger set & nut . , hose spring & nut , dcp main cap ( gun metal ) cp , dcp plunger pin with spring , dcp plunger top , squeezing grip ( plastic ) nozzle , replacement of fire hose box glass ( front ) , dcp cylinder discharge pipe of sufficient length for 10 kg capacity fire extinguisher , dcp cylinder discharge pipe of sufficient length for 75 kg capacity fire extinguisher , supply and fitting of plastic blank cap ( as per is 5290 , red colourwith gi chain ) suitable for 63 mm hydrant outlet as per direction of eic , supply and painting with two coats synthetic enamel paint ( asian/burger ) fire paint including scrapping , cleaning , applying one coat of red oxide primer cost of all labours , materials , carriage , taxes , letter/number writing , identification marks etc . complete in all respect . , brush painting of fire hose boxes ( inside and out side ) including stand with two coat of paint including letter/number writing ( colour to be specified by eic ) , spray/brush painting of fire bucket stand with its buckets ( 4 6 bucket set ) including letter/number writing . , spray painiting of fire extinguishers of all sizes including letter/number writing . , spray/ brush painting of foam/water monitors/double hydrant valves along with its stand post including letter/number writing . , fire siren including letter / number writing . , others , ppe maintenance / up keeping / cleaning on monthly basis of various items like helmets , breathing apparatus , water jel blanket , asbestos blanket , hand gloves ( rubber / asbestos ) , first aid box , stretcher , resuscicator , safety belt , ear muffs , fire proximity suits , safety torch , safety goggles including the cost of labour , material etc . complete as per instruction of engineer in charge . , cleaning & stacking properly the foam containers , updating stock , date of expiry , date of manufacturing on board and in register , placing foam containers at the foam monitors and water hydrants . , taking hose pipe for hydrotesting and keeping it back in positionafter drying /rolling inclusive of all taxes . , air filling in cylinders of breathing apparatus inclusive of all cost with transportation . , hydraulic testing of co2 cylinders inclusive of all taxes ( 2 to 4 . 5 kg/cm2 ) , hydraulic testing of co2 cylinders inclusive of all taxes ( 6 . 8 kg/cm2 ) , hydraulic testing of dcp cylinders of all sizes inclusive of all taxes , hydraulic testing of breathing appratus set , supply & pasting of slips on the extinguishers showing how to use the extinguishers & date wise maintenance records of fire extingusher . the good quality of adehsive to be used on slips for sticking on the extinguishers inclusive of all taxes as per direction of engineer in charge . , supply and fixing of wind socks on the position including all labour , tolls and tackels as per direction of engineer in charge inclusive of all . , patch work welding on the firefighting/foam line in case of leakage including all manpower & materials with tools and tackels with materials required as per satisfaction of the engieer in charge upto 12x12 size inclusive of all . , first aid box with snake serum , fire bucket , safety helmet , lettering with black japan paint of approved brand and manufacture . ( note: unit ea shall mean per letter per cm height ) . , supply & fitting of transparent acrylic sheet thickness 3 mm of hose box inclusive of rubber beeding by fixing it with proper adhesive wherever required complete in all respect inclusive of material , labours , consumables etc . ( inclusive of rates for both glasses and rubber beading . , complete overhauling of hand operated siren including oiling , greasing , painting and testing as per direction of eic inclusive of all tools & tackles , transportation , man power etc , testing of afff as per bis:4989 from reputed institutes like girda or any other approved laboratory in all respect by providing cas , transportation , man power etc . , maintenance and calibration of multigas detector sensor ( lel , o2 , co , h2s ) the charges includes cost ofcalibrating canisters inspection , maintenence of the detectors and issuance of the calibration certificates the cost of sending lel meterto the party workshop ( in india ) will be in the scope of iocl but after calibraiton and completion of work thecost of transportation of lel meter to iocl installation shall be in thescope of vendor . rate are for calibration of all sensor , make: m/s respo products model: qrae ii , , make: bw ( honeywell ) model: gasalertmax x , fire water line , dismantling of gate valves of sizes up to 8 of fire hydrant line e etc from bonnet cleaning and lapping the gate and refixing it with new gasket ( iocl supplied ) alongwith all tools , tackles , material , manpower etc , removal and installation of of faulty gate valves/nrv/glove valve/strainer upto 8 inch size including transportation either from owners storage point to workshop or work sit...

Due Date : July 15, 2021

Tender Value : ₹ Ref. Documents

View Tender
20
National Thermal Power Corporation Limited - Bihar

26229753 fire fighting equipments at ntpc barh , delivery hose 63 mm int dia , len 22 . 5mtr , fire hose:size 63mm , l 15m , co2 type extinguisher 4 . 5 kg cap , is:15683:2006 dry powder:9kg , water type fire extinguisher 09 ltrs cap , fire extinguisher: mech foam ( afff ) 9lt , dry chemical powder ( dcp ) fire fighting , foam branch , fmb 5x , al alloy having 63mm , co2 extinguisher 6 . 5 kg , co2 extinguisher 22 . 5kg , self contained breathing apparatus en137 , smoke and fume exhauster for fire , dcp fire extinguisher of 50 kg , fire extinguishr mech foam type 50 ltr , branch revolving head , diffuser branch , is:2871 , jet/spray multipurpose nozzle , foam inline inductor , fire beater , discharge tube of 2 kg co2 extinguisher , disch tube co2 ext 4 . 5 kg bis 2878 , discharge horn co2 extinguisher 6 . 8 kg , discharge hose tube horn 22 . 5kg , 5 mr , wheel for co2 exting 22 . 5 kg bis 2878 , discharge connecter tube with washer for , co2 connector for dcp extinguisher , dry powder type extinguisher trolly , mech . foam is:13386:50l discharge tube , is:15683:2006 dry chemical powder:6kg , rubber suction hose size 140mm , rubber suction hose size 100mm...

Due Date : December 21, 2020

Tender Value : ₹ Ref. Documents

View Tender
24
Home Department - Bihar

25485377 bids are invited for fire breathing apparatus (scba en 137) total quantity : 200...

Due Date : September 28, 2020

Tender Value : ₹ Ref. Documents

View Tender
28
National Thermal Power Corporation Limited - Bihar

23580238 procurement of fire fighting equipment at north karanpura dry powder fire extinguisher fire extinguisher, dry chemical powder water type fire extinguisher 09 ltrs cap fire extinguiasher, mechanical foam type co2 type fire extinguisher 4.5kg cap. fire hose, is:636 / 88, type:b, 63mm foam making branch 5x foam making branch 10x spray nozzle foam generator cap 100to225 m3 / min 7 smoke exhauster blower co2 gas cartridge co2 gas cartridges capacity 120 gms. co2 gas cartridge , cap:200grams breathing apparatus is:10245 standard dry chemical powder ( dcp ) fire fighting afff compound, 3% concentration, is: 4989...

Due Date : March 05, 2020

Tender Value : ₹ Ref. Documents

View Tender
29
Indian Oil Corporation Limited - Bihar

23020591 schedule of rate for maintenance of online equipments jobs and safety, fire fighting equipments and other associated jobs at indane bottling plant, gidha, bhojur 1 drive unit / gear box/motor 2 keeping conveyor soap tray in proper place, fixing of motor canopies,coupling guards of rotating equipments where ever missing & ensuring chain guards to all available drive unit. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 3 checking & servicing of all available gear boxes,arresting of leakage of lube oil from all availabe gear boxes/crank cases. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 4 checking the condition of all available driving motor, if there is any noise it is to be reported to shed officer immediately and same to be rectified. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 5 checking oil level inside the gear boxes/crank cases ,if insufficient,same to be added.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 6 checking and rectification of condition of all available motor gear coupling and its alignment.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 7 checking the condition of spider ,if worn out, to be replaced 8 checking the condition of all available triplex/duplex chain ,dry chain to be lubricated and wornt out to be replaced. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 9 conveyor system 10 monitoring the condition of all available sprockets on daily basis.if any abnormality found same to be rectified on priority basis. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 11 inspection of conveyor sections, broken to be repaired/replaced. adjustment of conveyor chain in length. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 12 tightning the loose conveyor railing. providing conveyor railings where ever missing. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 13 checking & rectifying the alignment of all block bearing and its greasing on weekly basis.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 14 checking/replacing/modifying the condition of conveyor chain on weekly basis. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 15 checking conveyor chain height wrt channel ,if level difference is less than 10 mm same to be made up. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 16 monitoring the condition of available chain guides on weekly basis and worn out guides to be replaced. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 17 starting of chain conveyor in no load condition after ensuring proper soap solution.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 18 checking the condition of wear strips on conveyor. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 19 chain cleaning on sundays/holiday. or as per instruction of iocl officials.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 20 tightning loose of all foundation bolts. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 21 day to day maintenance of auto malleting unit ,hot air sealing unit, purging unit,washing unit, drying unit including their pneumatic controls that includes preventive maintenance replacement of spare parts.assistance of oem/service engineer, if required. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 22 filling machine 23 machine calibration with 40 kg weight / standard weight & maintaining record for the daily maintenance.spares & consumable items to be provided by iocl. records to be brought for verification to iocl officials. 24 ensure all available filling machine is not touching with other equipment and with the bottom screw.to ensure smooth running without any interruption.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 25 clean the head cylinder arm /filling m/c with soft and clean cotton.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 26 clean all the sensor and reflector for proper funtioning.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 27 continous monitoring of filling machines for centering of cylinders,gas leackage from guns etc. filling accuracy to be maintained about 85 percent or as per iocl official instruction. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 28 filling gun should be perpendicular wrt head. tighten bkt. screw with central chuck nut.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 29 checking and servicing of all available bay of filling machines including checking of clamping cylinders,pusher,cylinders,gun lowering cylinder,checking of frl units,pouring oil in it,checking the condition of central column seal and record to be maintain. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 30 check the load cell of all available filling machine/equipments. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 31 maintain the min. 3mm distance between upper base and lower base in the filling machine with 40 kg. weight. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 32 servicing of all available filling gun and any defected o ring should be replaced. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 33 check the central column level.apply the silicon grease in central column. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 34 checking and servicing of carousal wheels ,rails including greasing of wheels if necessary. checking condition of drive units ,replacement of tyre drive if necessary ,pouring oil in oil resevoir checking and servicing of oil pump. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 35 checking carousal introduction unit ,including replacement of all pneumatic items in case of damage to pneumatic. apply the oil or grease into the shaft and leaner bearing in system. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 36 checking,cleaning and servicing of all available gas stop valve for proper functioning. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 37 checking and servicing of ejection unit including replacement of all pneumatic system. apply the oil or grease into the shaft and leaner bearing in system. work instructed by plant officer. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 38 check scale 39 calibrate all available c/s for proper functioning. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 40 check lifting table base screw should be tighten for proper function. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 41 check the isolator screw should be fully tighten and tighten the bottom screw. thoroughly clean all the joints & plates of c/s. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 42 check the load cell, bottom and top 8 screw for proper fuctioning. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 43 od/vd segregator 44 maintenance of ol/vl detectors (repairing works like servicing of guns and associated pneumatic spare to facilitate smooth operation on daily basis and providing assistance during schedule preventive maintenance, calibration & at the time of service visit by oem) 45 apply oil/ grease whereever mounting parts provided in the od/vd centring arrangement,gun down arrangement,pusher arrangement. remove water from frl. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 46 check centring device for proper functioning.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 47 check the clamping for proper centring,check the sensing gun for blockage. thoroughly clean the base and all links of clamping arrangement.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 48 vcm 49 day to day maintenance of vcm including their pneumatic controls that includes preventive maintenance replacement of spare parts.assistance in preventive/breackdown maintainance with oem/service engineer. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 50 degassing unit 51 day to day maintenance of degassing m/c including their pneumatic, mechanical, hydraulic controls that includes preventive maintenance replacement of spare parts.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 52 deshaping unit 53 day to day maintenance of degassing m/c including their pneumatic, hydraulic, mechanical controls that includes preventive maintenance replacement of spare parts.assistance in preventive/breackdown maintainance with oem/service engineer. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 54 integrated correction unit 55 check proper clamping,lifting & tilting of the unit. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 56 check for gun leakage and arrest the same. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 57 proper cleaning and greasing,servicing of gun. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 58 day to day preventive/breakdown maintenance of all pneumatic system for sqc unit ,including cvt,market return c/s including replacement of spare parts. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 59 others 60 providing assistence in servicing of all vapor compressors,lpg pump. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 61 checking & fixing of wire mesh in the cold flare line.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 62 cleaning of strainer in the cooling water pump ,lpg pump,lpg compressor ,carousel inlet,vapour line etc. and record maintain. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 63 draining water from all frl units/drain point in the main air & air reciever.pouring servo system 32 in all frl units as per direction from iocl official. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 64 maintenance jobs anywhere inside the plant/ tt parking area as per directive of iocl official.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 65 thorough cleaning of all machines/pneumatics along with cover. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 66 servicing/replacement of valves (lpg pump/vapour compressor /air compressors /water line of soap solution) as and when required. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 67 checking /servicing of all divertors,stopper units that includes greasing of all stopper ,pusher shunter unit,checking /servicing of pneuamtic system. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 68 servicing of lpg pump, vapour compressor,air compressor,evacuation compressor etc as per requirement. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 69 servicing of vapour extractor unit as per requirement. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 70 rov maintenance 71 checking of air leackage,closing/opening time,greasing of rov for smooth funtioning.assistance & repairing of rovs if required. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 72 cylinder streghthening m/c 73 day to day maintenance of cylinder streghthening m/c including their pneumatic controls that includes preventive maintenance replacement of spare parts. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 74 filling of 47.5 kg on daily basis 75 filling and all types of maintenance of 47.5 kg of lot / vot in filling shed 76 filling of 5 kg on daily basis 77 filling and all types of maintenance of 5 kg in filling shed 78 filling of 425 kg on daily basis 79 filling and all types of maintenance of 425 kg in filling shed 80 checking, maintenance of prefilling o ring machine to make machine operative 81 apart from above, any other maintenance related job assinged by location in charge of patna bp from time to time 82 supply of oxygen cylinders, welding rods, grinding wheels, ginder (m complete set) 83 maintenance of all types of dcp and co2 fes: emptying of dcp from fe, drying of dcp, filling of dcp into fe, weighing of co2 cartridges, checking of squeeze grip nozzle, hose, plunger, gasket, stencilling of test dates on the fe, positioning the same at the previous place. a)10kg dcp, b) 75 kg dcp, c) 2 kg co2 fe,d) 4.5kg co2 fe,e), 6 kg co2 fe the job includes maintainance of the same.assistance in hydrotest of all types of dcp as per schedule and directions of iocl officials. 84 monthly checking & servicing of double hydrant points, water monitors & hose boxes. the job include greasing and lubricating valves, tightening and replacement of valve glands, greasing of swelve joints of monitors, replacement of valves if necessary, replacement of coupling if necessary, replacement of landing valves, replacement of coupling washers, assistance in drying hoses as necessary and directed. necessary spares and consumables shall be supplied by ioc. 85 flushing of hydrant system (sectionwise) and record to be maintaine and repressurisation of same. 86 monthly checking, servicing and actuation by all the available modes of all deludge valves system. the job include opening and inspection of internal components of deluge valves, cleaning and servicing of parts and replacement of spares or consumables as directed by plant official , assembly and testing of the deluge valve and re setting of the dvs after operation. 87 monthly checking & servicing of hand sirens , manual call points and emergency shut down .job includes greasing of hand sirens and simulation of mcps and esds. 88 monthly checking & servicing of mv sprinkler system and globe & gate,butterfly, nrv valves of water pipe lines. the job include cleaning of sprinkler nozzles, checking and arresting of air leakages from sprinkler network, providing circulation/ flushing of water in sprinkler pipe lines, servicing/lubricating valves and servicing & tightening of valve glands in lpg/water pipe lines system including replacement of gland packing if necessary, replacement of air line of sprinkler system for any leakages . necessary spares and consumables shall be supplied by ioc. 89 checking and servicing of fire pump installations & jockey pumps. the job include daily checking of engine & pump conditions, checking for adequate water level in static water tanks, checking for any water leakage from pipelines & fuel leakage from fule lines, checking for any leakage from pump glands and repair of glands for any water leakage including servicing and cleaning of gland and replacement of gland packing if necessary, maintaining required fuel level in fuel tanks of fire engines & cleaning of pump stariners on quarterly basis as directed by plant officials. monthly shut off pressure test ,half yeraly pump performance and yearly four hour running of fire engine to be done as per direction of ioc official and maintenance of daily log book of fire engines.the necessary spares and consumables shall be supplied by ioc. 90 monthly checking & servicing of all .rov s. job includes checking & arresting any air leakage, checking for smooth operation and greasing (if necessary). 91 daily checking,tighting & replacement of foundation bolts, checking and adjusting belt tensions, checking of coupling conditions and checking of lubrication levels of jockey pumps, fire pumps,security air compressors and air compressors. necessary spares and consumables shall be supplied by ioc. 92 maintaining preventive maintenance records and history cards of fire pumps, jockey pumps, deluge valves, hydrants,monitors & others as per norms. 93 daily operation of air compressors. build up sufficient air pressure to operate all the hydraulic,pneumatics and electronics equipments.checking,tighting & replacement of foundation bolts, checking and adjusting belt tensions, checking of coupling conditions and checking of lubrication levels of air compressors and. necessary spares and consumables shall be supplied by ioc. 94 testing of lpg hoses & keeping records as per iocl standards 95 assistance in checking, servicing, & testing of pav and srv & keeping records 96 testing of fire water hoses & keeping records as per iocl standard 97 checking of safety trip of fire engine and air compressor 98 checking the condition of battery for fire engines. 99 equipments of first aid fire fighting trolley to be maintained in healthy conditions. 100 to maintain 7 kg/cm2 water pressure in hydrant system at the farthest point with help of jockey pump operating automatically. 101 all valves on the fire water ring main/hydrant/ monitor valves checked for leaks/operation and lubricated once in month and record maintained & no leaks observed. 102 fire hydrant system to be in healthy operating conditions and kept under pressure with jockey pump. no leakage / corrosion should be observed. maintain frequency of security air compressor and jockey pump not less than 30 minutes and arresting any leakage on air line/water line .weekly water ring main inspection to be done and record to be maintained there off as per oisd 144. 103 periodic maintenance of breathing apparatus and fire suit,low temp suit,low temp gloves,water gel blanket etc.proper cleaning and upkeeping of safety almirah. 104 quarterly strainer cleaning of deluge valves ,fire engines suction line of jockey pumps and maintenance of record thereoff 105 weekly water seal level monitoring of vapor trap of plant and maintainance of waterline and replacement fauly mettalic float if required .mettalic float shall be supplied by corporation 106 monthly checking of gms sensors by leaking lpg in individual sensor and record keeping. 107 assistance to be provided during fire fighting, safety training and keeping of fire fighting material at identified place after drill and training. 108 monthly inspection of fire proofing of horton sphere leg and maintenance of record thereoff. 109 apart from above, any other safety related related job assinged by location in charge of patna bp from time to time 110 overtime considering night shift/sunday/holiday operation / maintenance for skilled per month 111 overtime considering night shift operation / maintenance for semi skilled per month ...

Due Date : January 03, 2020

Tender Value : ₹ 1.20 Crore

View Tender
30
Indian Oil Corporation Limited - Bihar

22760099 schedule of rate for maintenance of online equipments jobs and safety, fire fighting equipments and other associated jobs at indane bottling plant, gidha, bhojur 1 drive unit / gear box/motor 2 keeping conveyor soap tray in proper place, fixing of motor canopies,coupling guards of rotating equipments where ever missing & ensuring chain guards to all available drive unit. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 3 checking & servicing of all available gear boxes,arresting of leakage of lube oil from all availabe gear boxes/crank cases. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 4 checking the condition of all available driving motor, if there is any noise it is to be reported to shed officer immediately and same to be rectified. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 5 checking oil level inside the gear boxes/crank cases ,if insufficient,same to be added.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 6 checking and rectification of condition of all available motor gear coupling and its alignment.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 7 checking the condition of spider ,if worn out, to be replaced 8 checking the condition of all available triplex/duplex chain ,dry chain to be lubricated and wornt out to be replaced. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 9 conveyor system 10 monitoring the condition of all available sprockets on daily basis.if any abnormality found same to be rectified on priority basis. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 11 inspection of conveyor sections, broken to be repaired/replaced. adjustment of conveyor chain in length. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 12 tightning the loose conveyor railing. providing conveyor railings where ever missing. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 13 checking & rectifying the alignment of all block bearing and its greasing on weekly basis.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 14 checking/replacing/modifying the condition of conveyor chain on weekly basis. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 15 checking conveyor chain height wrt channel ,if level difference is less than 10 mm same to be made up. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 16 monitoring the condition of available chain guides on weekly basis and worn out guides to be replaced. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 17 starting of chain conveyor in no load condition after ensuring proper soap solution.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 18 checking the condition of wear strips on conveyor. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 19 chain cleaning on sundays/holiday. or as per instruction of iocl officials.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 20 tightning loose of all foundation bolts. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 21 day to day maintenance of auto malleting unit ,hot air sealing unit, purging unit,washing unit, drying unit including their pneumatic controls that includes preventive maintenance replacement of spare parts.assistance of oem/service engineer, if required. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 22 filling machine 23 machine calibration with 40 kg weight / standard weight & maintaining record for the daily maintenance.spares & consumable items to be provided by iocl. records to be brought for verification to iocl officials. 24 ensure all available filling machine is not touching with other equipment and with the bottom screw.to ensure smooth running without any interruption.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 25 clean the head cylinder arm /filling m/c with soft and clean cotton.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 26 clean all the sensor and reflector for proper funtioning.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 27 continous monitoring of filling machines for centering of cylinders,gas leackage from guns etc. filling accuracy to be maintained about 85 percent or as per iocl official instruction. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 28 filling gun should be perpendicular wrt head. tighten bkt. screw with central chuck nut.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 29 checking and servicing of all available bay of filling machines including checking of clamping cylinders,pusher,cylinders,gun lowering cylinder,checking of frl units,pouring oil in it,checking the condition of central column seal and record to be maintain. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 30 check the load cell of all available filling machine/equipments. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 31 maintain the min. 3mm distance between upper base and lower base in the filling machine with 40 kg. weight. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 32 servicing of all available filling gun and any defected o ring should be replaced. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 33 check the central column level.apply the silicon grease in central column. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 34 checking and servicing of carousal wheels ,rails including greasing of wheels if necessary. checking condition of drive units ,replacement of tyre drive if necessary ,pouring oil in oil resevoir checking and servicing of oil pump. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 35 checking carousal introduction unit ,including replacement of all pneumatic items in case of damage to pneumatic. apply the oil or grease into the shaft and leaner bearing in system. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 36 checking,cleaning and servicing of all available gas stop valve for proper functioning. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 37 checking and servicing of ejection unit including replacement of all pneumatic system. apply the oil or grease into the shaft and leaner bearing in system. work instructed by plant officer. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 38 check scale 39 calibrate all available c/s for proper functioning. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 40 check lifting table base screw should be tighten for proper function. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 41 check the isolator screw should be fully tighten and tighten the bottom screw. thoroughly clean all the joints & plates of c/s. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 42 check the load cell, bottom and top 8 screw for proper fuctioning. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 43 od/vd segregator 44 maintenance of ol/vl detectors (repairing works like servicing of guns and associated pneumatic spare to facilitate smooth operation on daily basis and providing assistance during schedule preventive maintenance, calibration & at the time of service visit by oem) 45 apply oil/ grease whereever mounting parts provided in the od/vd centring arrangement,gun down arrangement,pusher arrangement. remove water from frl. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 46 check centring device for proper functioning.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 47 check the clamping for proper centring,check the sensing gun for blockage. thoroughly clean the base and all links of clamping arrangement.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 48 vcm 49 day to day maintenance of vcm including their pneumatic controls that includes preventive maintenance replacement of spare parts.assistance in preventive/breackdown maintainance with oem/service engineer. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 50 degassing unit 51 day to day maintenance of degassing m/c including their pneumatic, mechanical, hydraulic controls that includes preventive maintenance replacement of spare parts.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 52 deshaping unit 53 day to day maintenance of degassing m/c including their pneumatic, hydraulic, mechanical controls that includes preventive maintenance replacement of spare parts.assistance in preventive/breackdown maintainance with oem/service engineer. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 54 integrated correction unit 55 check proper clamping,lifting & tilting of the unit. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 56 check for gun leakage and arrest the same. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 57 proper cleaning and greasing,servicing of gun. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 58 day to day preventive/breakdown maintenance of all pneumatic system for sqc unit ,including cvt,market return c/s including replacement of spare parts. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 59 others 60 providing assistence in servicing of all vapor compressors,lpg pump. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 61 checking & fixing of wire mesh in the cold flare line.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 62 cleaning of strainer in the cooling water pump ,lpg pump,lpg compressor ,carousel inlet,vapour line etc. and record maintain. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 63 draining water from all frl units/drain point in the main air & air reciever.pouring servo system 32 in all frl units as per direction from iocl official. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 64 maintenance jobs anywhere inside the plant/ tt parking area as per directive of iocl official.spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 65 thorough cleaning of all machines/pneumatics along with cover. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 66 servicing/replacement of valves (lpg pump/vapour compressor /air compressors /water line of soap solution) as and when required. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 67 checking /servicing of all divertors,stopper units that includes greasing of all stopper ,pusher shunter unit,checking /servicing of pneuamtic system. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 68 servicing of lpg pump, vapour compressor,air compressor,evacuation compressor etc as per requirement. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 69 servicing of vapour extractor unit as per requirement. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 70 rov maintenance 71 checking of air leackage,closing/opening time,greasing of rov for smooth funtioning.assistance & repairing of rovs if required. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 72 cylinder streghthening m/c 73 day to day maintenance of cylinder streghthening m/c including their pneumatic controls that includes preventive maintenance replacement of spare parts. spares & consumable items to be provided by iocl. records to be maintained & brought for verification to iocl officials. 74 filling of 47.5 kg on daily basis 75 filling and all types of maintenance of 47.5 kg of lot / vot in filling shed 76 filling of 5 kg on daily basis 77 filling and all types of maintenance of 5 kg in filling shed 78 filling of 425 kg on daily basis 79 filling and all types of maintenance of 425 kg in filling shed 80 checking, maintenance of prefilling o ring machine to make machine operative 81 apart from above, any other maintenance related job assinged by location in charge of patna bp from time to time 82 supply of oxygen cylinders, welding rods, grinding wheels, ginder (m complete set) 83 maintenance of all types of dcp and co2 fes: emptying of dcp from fe, drying of dcp, filling of dcp into fe, weighing of co2 cartridges, checking of squeeze grip nozzle, hose, plunger, gasket, stencilling of test dates on the fe, positioning the same at the previous place. a)10kg dcp, b) 75 kg dcp, c) 2 kg co2 fe,d) 4.5kg co2 fe,e), 6 kg co2 fe the job includes maintainance of the same.assistance in hydrotest of all types of dcp as per schedule and directions of iocl officials. 84 monthly checking & servicing of double hydrant points, water monitors & hose boxes. the job include greasing and lubricating valves, tightening and replacement of valve glands, greasing of swelve joints of monitors, replacement of valves if necessary, replacement of coupling if necessary, replacement of landing valves, replacement of coupling washers, assistance in drying hoses as necessary and directed. necessary spares and consumables shall be supplied by ioc. 85 flushing of hydrant system (sectionwise) and record to be maintaine and repressurisation of same. 86 monthly checking, servicing and actuation by all the available modes of all deludge valves system. the job include opening and inspection of internal components of deluge valves, cleaning and servicing of parts and replacement of spares or consumables as directed by plant official , assembly and testing of the deluge valve and re setting of the dvs after operation. 87 monthly checking & servicing of hand sirens , manual call points and emergency shut down .job includes greasing of hand sirens and simulation of mcps and esds. 88 monthly checking & servicing of mv sprinkler system and globe & gate,butterfly, nrv valves of water pipe lines. the job include cleaning of sprinkler nozzles, checking and arresting of air leakages from sprinkler network, providing circulation/ flushing of water in sprinkler pipe lines, servicing/lubricating valves and servicing & tightening of valve glands in lpg/water pipe lines system including replacement of gland packing if necessary, replacement of air line of sprinkler system for any leakages . necessary spares and consumables shall be supplied by ioc. 89 checking and servicing of fire pump installations & jockey pumps. the job include daily checking of engine & pump conditions, checking for adequate water level in static water tanks, checking for any water leakage from pipelines & fuel leakage from fule lines, checking for any leakage from pump glands and repair of glands for any water leakage including servicing and cleaning of gland and replacement of gland packing if necessary, maintaining required fuel level in fuel tanks of fire engines & cleaning of pump stariners on quarterly basis as directed by plant officials. monthly shut off pressure test ,half yeraly pump performance and yearly four hour running of fire engine to be done as per direction of ioc official and maintenance of daily log book of fire engines.the necessary spares and consumables shall be supplied by ioc. 90 monthly checking & servicing of all .rov s. job includes checking & arresting any air leakage, checking for smooth operation and greasing (if necessary). 91 daily checking,tighting & replacement of foundation bolts, checking and adjusting belt tensions, checking of coupling conditions and checking of lubrication levels of jockey pumps, fire pumps,security air compressors and air compressors. necessary spares and consumables shall be supplied by ioc. 92 maintaining preventive maintenance records and history cards of fire pumps, jockey pumps, deluge valves, hydrants,monitors & others as per norms. 93 daily operation of air compressors. build up sufficient air pressure to operate all the hydraulic,pneumatics and electronics equipments.checking,tighting & replacement of foundation bolts, checking and adjusting belt tensions, checking of coupling conditions and checking of lubrication levels of air compressors and. necessary spares and consumables shall be supplied by ioc. 94 testing of lpg hoses & keeping records as per iocl standards 95 assistance in checking, servicing, & testing of pav and srv & keeping records 96 testing of fire water hoses & keeping records as per iocl standard 97 checking of safety trip of fire engine and air compressor 98 checking the condition of battery for fire engines. 99 equipments of first aid fire fighting trolley to be maintained in healthy conditions. 100 to maintain 7 kg/cm2 water pressure in hydrant system at the farthest point with help of jockey pump operating automatically. 101 all valves on the fire water ring main/hydrant/ monitor valves checked for leaks/operation and lubricated once in month and record maintained & no leaks observed. 102 fire hydrant system to be in healthy operating conditions and kept under pressure with jockey pump. no leakage / corrosion should be observed. maintain frequency of security air compressor and jockey pump not less than 30 minutes and arresting any leakage on air line/water line .weekly water ring main inspection to be done and record to be maintained there off as per oisd 144. 103 periodic maintenance of breathing apparatus and fire suit,low temp suit,low temp gloves,water gel blanket etc.proper cleaning and upkeeping of safety almirah. 104 quarterly strainer cleaning of deluge valves ,fire engines suction line of jockey pumps and maintenance of record thereoff 105 weekly water seal level monitoring of vapor trap of plant and maintainance of waterline and replacement fauly mettalic float if required .mettalic float shall be supplied by corporation 106 monthly checking of gms sensors by leaking lpg in individual sensor and record keeping. 107 assistance to be provided during fire fighting, safety training and keeping of fire fighting material at identified place after drill and training. 108 monthly inspection of fire proofing of horton sphere leg and maintenance of record thereoff. 109 apart from above, any other safety related related job assinged by location in charge of patna bp from time to time 110 overtime considering night shift/sunday/holiday operation / maintenance for skilled per month 111 overtime considering night shift operation / maintenance for semi skilled per month ...

Due Date : December 23, 2019

Tender Value : ₹ 1.20 Crore

View Tender
31
Patna Municipal Corporation - Bihar

21386536 supply of items : 1. air line breathing apparatus 2. air line respirator with manually operated air blower 3. blower 4. breath mask 5. emergency medical oxygen resuscitator kit 6. first aid box 7. face mask 8. gas monitor ( 4 gases ) 9. hand gloves 10. head lamp 11. helmet 12. life guard pad 13. normal face mask 14. nylon rope ladder 5 meter 15. nylon safety belt 16. pocket book 17. safety belt 18. safety body clothing 19. safety body harness 20. safety goggles 21. safety gumboots 22. safety helmets 23. safety showers 24. safety torch...

Due Date : August 16, 2019

Tender Value : ₹ Ref. Documents

View Tender
45
East Central Railway - Bihar

12143102 supply of self contained breathing apparatus conforming to letest version of en 137 or equivalent is as per rdso specifiction no. mp 0.08,00.57 rev 01 oct. 2005...

Due Date : April 12, 2017

Tender Value : ₹ Ref. Documents

View Tender
46
Police Headquarters - Bihar

11084620 supply of earthquake rescue instruments ( full set ) for special battalion for disaster risk management work bag valve mask infant , torch , stretcher / spin board with accessories , ventilator and sir tube with motor , rotary rescue saw for diamond , chipping hammer , self contained compressed air open circuit breathing apparatus , electric drill with protective carrier , electric drill bit set , diamond tip blade , composite blade metal for angle cutter , reciprocating saw , blade for reciprocating saw ( for wooden cutting ) , generator portable 2500 w kereosen fuel , reflective jackets waterproof , safety helmets , hard toe steel shank boots , water bottle , safety torches etc...

Due Date : December 07, 2016

Tender Value : ₹ Ref. Documents

View Tender
47
East Central Railway - Bihar

11061840 self contained breathing apparatus conforming to letest version of en 137 or equivalent is as per rdso specifiction no. mp 0.08,00.57 rev 01 oct. 2005...

Due Date : November 28, 2016

Tender Value : ₹ Ref. Documents

View Tender
49
East Central Railway - Bihar

10632483 self contained breathing apparatus conforming to letest version of en 137 or equivalent is 00 per rdso specifiction no. mp 0.08,00.57 rev 01 oct. 2005...

Due Date : September 26, 2016

Tender Value : ₹ Ref. Documents

View Tender