Indian Oil Corporation Limited - Bihar

33485268 supply of axnp002a mv power and control cables supply of axnp002a mv power and control cables , mv power cables: 650 / 1100v grade stranded aluminium conductor, xlpe insulated, frlsh pvc inner sheathed, glavanised wire / flat strip armoured, frlsh pvc outer sheathed. , 3c x 35 sq.mm , 3c x 95 sq.mm , 3c x 120 sq.mm , 3c x 150 sq.mm , 3c x 300 sq.mm , 3.5c x 35 sq.mm , 3.5c x 50 sq.mm , 3.5c x 150 sq.mm , 3.5c x 185 sq.mm , 3.5c x 300 sq.mm , 4c x 70 sq.mm , 4c x 95sq.mm , 4c x 120 sq.mm , 4c x 240 sq.mm , mv power cables: 650 / 1100v grade stranded copper conductor, xlpe insulated, frlsh pvc inner sheathed, glavanised wire / flat strip armoured, frlsh pvc outer sheathed. , 2c x 10 sq.mm , 2c x 25 sq.mm , 2c x 70 sq.mm , 2c x 95 sq.mm , 3.5c x 300 sq.mm , 3c x 2.5 sq.mm , 3c x 4 sq.mm , 3c x 6 sq.mm , 3c x 10 sq.mm , 4c x 6 sq.mm , mv power cables: 650 / 1100v grade stranded copper conductor, glass mica tape coated, xlpe insulated, frlsh pvc inner sheathed, glavanised wire / flat strip armoured, frlsh pvc outer sheathed, fire survival ( fire resistant ) cable. , 4c x 4 sq.mm , 4c x 6 sq.mm , 4c x 25 sq.mm , mv control cables: 650 / 1100v grade stranded copper conductor, xlpe insulated, frlsh pvc inner sheathed, glavanised wire / flat strip armoured, frlsh pvc outer sheathed, twisted pair / triad with overall shielded. , 4p x 1.5 sq mm , 6p x 1.5 sq mm , 2p x 2.5 sq.mm , 4p x 2.5 sq.mm , 6p x 2.5 sq.mm , 12p x 2.5 sq.mm => limited...

Rail Wheel Plant - Bihar

33129061 supply of phosphate easterphosphate easter,phosphate easter fire resistant hydrualic fluid hisafe dr 46 of m/s hardcastle and waud manufacturing co ltd or phosphocent 246 of m/s fuchs ltd or servo fyress hfdr 46 of m/s indian oil corporation ltd or similar in other make like bpcl,hpcl, balmer lawrie & co ltd., raj petro and sah petroleum ltd..packed in 200 ltrs net in new , sound and non returnable steel drums. technical parameters is as per attached annexure a...

Building Construction Department - Bihar

31163433 estimate of furniture for new govt. engineering . college, khagaria 1 office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side one drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock. 2 2 seater sofa overall size 1130w x 700d x 785 h cm, seat height 43.5 cm side frame assembly: the side frame assembly is fitted to the two ends of the connecting beam assembly to form, the leg cum armrest assembly. it is made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick ms e.r.w. tube and powder coated ( dft 40 60 microns ). the ends are fitted with abs moulded end caps, 3. seatrest assembly:the seat rest assembly consists of a fabricated inner frame assembly insitu moulded high resilience (hr) polyurethane foam having density = 45 +/ 2 kg/m3 with hardness load 25 ± 2 kgf as per is:7888 for 25% compression of the foam. the complete moulded seat rest assembly is covered with a replaceable fabric upholstery cover *seat size: 52.0cm. (w) x 50.0cm. (d) x 6.0cm. (t), 4. backrest assembly:the backrest assembly is flexing type and consists of a fabricated inner frame assembly insitu moulded with high resilience (hr) polyurethane foam having density = 45 +1 2 kg/m3 with hardness load 14 ± 2 kgf as per is:7888 for 25% compression of the foam. the complete moulded backrest assembly is covered with a replaceable fabric upholstery cover. *back size: 52.0cm. (w) x 59.0cm. (h) x 6.0cm. (t), 5. adj. glides: the adj glide is injection moulded in black nylon & fitted to the front end of side frame assembly along with abs moulded adj. glide base to take care or unleveled floor surface 3 3 seater sofa the side frame assembly made of 38mm dia 2mm thick is fitted to the two ends of the connecting beam assembly to form the leg cum armrest assembly. it is made of a ms. e.r.w. tube duly powder coated. the ends are fitted with abs moulded end caps. tie member: it is the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members are used to connect the side frames. the tie member is made of ms. e.r.w. tube 40mmx40mm 2mm thick duly powder coated. the seat/back assemblies are mounted on the tie member. l bracket of 6mm thick steel connects the back to the tie member assembly. seat foam is of 45 +/ 5 kg/m3 and back foam is of 32 +/ 5 kg/m3 with hardness of 25+/ 2 on hampden m/c. at 25% compression of the foam. seat size 52cm widex50cm deep and back size 52 cm wide and 60cm high. back of the sofa flexes for additional comfort 1 seater –601mmwx700mmdx 810mmh, 3 seater –1640w x 700d x 785 h cm 4 3 seater steel chair cross beammade of ms erw rectangular black powder coated tube of 80 x 40 x 2 mm leg & arm rest chrome plated made of cold rolled steel. arm rest & leg assembled to the cross beam with m10 x 100 mm bolts. seat & back 1.6mm thick powdercoated perforated shell of cold rolled ms sheet. side bar of chrome plated solid steel 30 x 12 mm (din 174) with flunting & plastic insert .the shell is assembled on the cross beam with help of m8 bolts the overall dimension is 1608mm (l) x 695mm (h) x 555mm (d), seat height : 405mm 5 work bench of size 4’ x 3’, angle 1.5 x 1.5 with 2 pair of legs with work top with overall dimensions. 1200mm l x 900mm d x 950mm h, the worktop of mdf ext garde is12406 wood. max udl 1500kgs the worktop should be made of various layers of beech wood which are planed, glued and pressed together. this should make the work top non deformable, and load and wear resistant. this shall be covered with 4mm steel sheet. leg: the bench leg should be powder coated should be 80mm l x 1265mm d x 960mm h. back bracing for stability 6 centre table of size 1200w x 600d x 378h built with the extremely durable rubberwood, the table can hold weight up to 25kgs. with a very suitable cappuccino color, the table will complement any style of décor. the tapered legs provide stable support. it’s free of flaws design can accommodate your books, magazines, laptop and coffee mugs, all at once. the well thought out dimensions of the table make it easier to position it anywhere in the house 7 work bench of size 8’ x 4’ with 2 pair of legs with work top with overall dimensions. 2400mm l x 1200mm d x 950mm h, the worktop of mdf ext garde is12406 wood. max udl 1500kgs made of various layers of beech wood which are planed, glued and pressed together. this should make the work top non deformable, and load and wear resistant. bench leg: the bench leg should be powder coated should be 80mm l x 1265mm d x 960mm h. back bracing for stability 8 executive chair with cushioned seat is made of injection molded plastic outer & inner. plastic inner is upholstered with stitched cover and moulded high resilience polyurethane foam of density 4542 kg/m*,and hardness load 16 + 2 kgf as per 15:7888 for 25% compression.the stitched cover is made from spacer fabric and leatherette seat size : 47.0 cm. (w) x 48.0 cm. (d), tunular frame : the powder coated (dft 40 60 micron) tubular frame is cantilever type & made of 02.5440.03 cm x 0.240.016 cm thk ms erw tube.the back connected to frame through powder coated (dft 40 60 micron) high pressure die cast connector. 9 office chair with seat and back are made from seasoned wood and plywood. the same is upholstered with black synthetic leather and polyurethane foam. back size 46.0cm(w)x27.0cm(h). seat size 46.0cm(w)x40.0cm(h). the armrest is gas assisted injection moulded from black polypropylene. the understructure assembly is a cantilever type frame.width of the chair 58cm, depth 56.5cm,height 87.5cm,seat height 48cm. 10 office chair : the seat and back are made up of 1.2 ±0.1cm. thick hot pressed plywood measured as per qa method described in ocp qlta p14 18 and upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam is designed with contoured lumbar support for extra comfort. back size 49.0 cm. (w) x 47.0 cm. (h) , seat size 49.0 cm. (w) x 44.0 cm. (id) high resilience (hr) polyurethane foam: the hr polyurethane foam is moulded with density = 45 ±2 kg/m3 and hardness load 16 ± 2 kgf as per is:7888 for 25% compression. 11 principal chair: the seat is made up of 1.4± 0.1 chick hot press 4 plywood upholstered with fabric and moulded polyurethane foam. it has a seat depth adjustment of 5.0±0.3 cm integrated in the seat through a sliding mechanism. seat size: 50.0cm (w)x 49.0cm(d).the back is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustable lumbar support made of injection moulded polypropylene having an adjustment of 6.0±0.1cm.backsize: 50.0cm(w) x68.0 cm(h).the polyurethane foam for seat is of density 55± 5kg/m3. it is made of glass filled polyamide arm structure with pu arm top and height adjustment of 7.0 ±0.5cm.the arm top has swivel and to for movements. to for movement is 6.0± 0.5cm.the inner tube of armrest is chrome plated. the mechanism is designed with the following features:• 360° revolving type.• centre tilt synchro• 3 position (including upright lock) giving option of variable tilt angle to the chair with anti shock feature. the headrest is injection moulded din glass filled polypropylene which is upholstered with foam and fabric has an adjustment of 6.0± 0.1cm & its assembled over the full back chair. the pneumatic height adjustment is chrome plated with an adjustment stroke of 9.0 ± 0.3cm.the pedestal is high pressure die cast polished aluminum and fitted with 5 nos. twin wheel castors. the pedestal is 65.0±0.5 cm p.c.d. the twin wheel castors are injection moulded in black glass filled polyamide having 6.0±0.1cm wheel diameter. the chrome plated tubular frame is made of día2.8±0.03cm x0.2±0.02 cm the m.s. round tube. the frame is fitted with plastic caps made of injection moulded glass filled polypropylene. 75(w)* 75(d)* 115 130(h)* 44.5 53.5(sh). 12 computer chair with seat and back are made uo injection moulded high impact strenght polypropylene polymer compound with indoor graade uv resistance.the tubular weled frame is made from dia2.22 +/ 0.03cmx 0.12+/ 0.0128 cm and 3.5+/ 0.03 cm x 0.12+/ 0.0128 am stainless steel 202 grade tube.the tube are buff polished to give shiny finish. cm. the shoes are made of high impact strenght polypropylene polymer. compond with indoor grad uv resistance and pressed fitted with tubularfram. size : (w)52.5cm*(d)55.8cm*(h)84.5cm*(seat h) 45.0 cmseat size 52.5cm(w)*53.2 cm(d) back size 51.6 cm(w)*40.5 cm (h). 13 office chair mid back pneumatic height adjustment cushioned revolving chair made up of 1.2cm thick hot pressed ply wood seat & back upholstered with fabric with moulded polyurethane foam together with moulded abs seat & back integral skin polyurethane with reinforced with m.s. insert. the tilt mechanism adjustment upright locking, 360 degree revolving type fitted with 05 nos. twin wheel castor dia 5 cm. 14 compactor on 12 feet rail length moves on rails. the cabinet body rigid knock down construction made of 0.8 thick crca steel eonforming to is: 513 gld. body units are bolted to undercarriage. optimizer height from ground is 2081] mm (1930 hody+ 65 under 35 channel systems] finish: — the bodies inciuding shelves are given anti rust surface treatment 8‘ are powder coated with epoxy polyester powder oven backed with a controlled temperature of 130 deg. to 200 deg. c.sheif:l made of 0.8 thick crca steel conforming to is;513 gd. max load bearing capacin is fit! kg. udl per ahett x 5:400 kg. eauh cabinet. undercarriage: the undercarriage is a welded trams made of hr sheet 3.15 mm thick conforming [0 is; 1d?48movement of the system: push pull configuration {type p utype f~2} movement of units achieved pushing or putting chrome plated 0 handle fitted suitable height on one side at body. 15 conference table of 30 seater capacity shall be an eco modular conference table enables various configurations to suit different conference rooms. it is made of particle board and has wire management facilities for uncluttered wiring. it has profiled legs with twin colored modesty for better looks, double 1350.0wx 600.0dx 750.0h, work surface top thickness is 25mm plb with pvc beading allover, legs modesty wire manager made from 18mm thick plt having curved profile.made from plt (prelaminated twin) boards 18mm thick in two shades. a wire manager running along the width of desk fitted on the modesty panel from inside. 16 corner table of size 530w x 450d x 450h built with the extremely durable rubberwood, with a very suitable cappuccino color, the table will complement any style of décor. the tapered legs provide stable support. it’s free of flaws design can accommodate your books, magazines, laptop and coffee mugs, all at once. the well thought out dimensions of the table make it easier to position it anywhere in the house. 17 dining table of 8 seater with wire manager of size 2400w * 1200d * 750h h top all tops are made from 25mm thick pre—laminated board with 2mm thick. pvc edge beading side panel all side panels are made from 25mm thick pre—laminated twin with 2mm thick pvc lipping of same color on sides and 0.8mm pvc lipping of matching color on the bottom curve, modesty these panels are made from 18mm thick pre laminated board with 0.8mm pvc lipping of matching color, access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical/data voice. sockets from top, powder coated switch mounting tray made from 0.8mm and 1.2mm m.s sheet. switches to be mounted on tray as per requirement. provision for mounting 8 — module anchor roma switch plate on switch mounting tray. wire manager rehau made from rau pvc 1309/7558 (black color). 18 file cabinet with 4 drawer width: 470mm, height: 1320mm, depth: 620mm , rigid knockdown construction, material: top, side & drawer frontmade from0.7mm thk **crca, drawer inside cover, side back side made from0.6mmthk **crca, back, bottom, drawer bottommade from 0.5mmthk **crca, **crcasteel confirming to is 513, grade d, label holder snap on type plastic label holder on drawer fronts, locking & anti tipping arrangement centralized lockingwith camlock& having antitipping arrangement to ensure that when one ,drawer is opened for use, it does not allow other drawers to be opened, finish epoxy polyester powder coated to the thickness of 50 microns (+/ 10). 19 fire proof cabinet shall be designed to protect the contents (paper media documents) against the fire hazard.shell: the external shell of the cabinet shall be of steel of minimum 2 mm thick and internal shell of steel of 1.6 mm thick, both conforming to is 513. further fortified by suitable in situ insulating fire resistant barriers to meet the required protection. the overall protection to the contents shall be minimum 70 mm on all six sides. door: the external door of the cabinet shall be of steel of minimum 2 mm thick conforming is 513 and further fortified with hard plate over the lock for burglary protection and in situ insulating fire resistant barrier material to meet required fire protection.  bolt work: the door shall be secured by four way locking mechanism / bolt work with minimum 8 moving shooting bolts of 20 mm diameter. door & body fitment: the door fits in the cabinet having tongue and groove construction that stops hot gases and high temperature to pass through and withstand temperature up to 1010 deg.c. locking: the frrc shall be equipped with a dual control high precision key lock of minimum six levers. the lock body shall be of zinc alloy and the levers in the lock shall be of brass conforming to is 410. there shall not be any dummy lever in the lock. the storage capacity shall be minimum 650 liters with minimum usable internal sizes in mm as 1620 (h) x 670 (w) x 599 (d).the cabinet shall be provided with minimum four nos. adjustable shelves. 20 office chair with seat/back assembly: the cushioned seat assembly consists of seat base moulded in glass filled poly amide, moulded polyurethane foam & upholstered with high stretch knitted polyester fabric. the cushioned back assembly consists of back inner moulded in polypropylene in situ moulded with polyurethane foam & upholstered with high stretch knitted polyester fabric. back size : 45.5 cm. (/1/) x 53.0 cm. (h) seat size : 48.5 cm. (w) x 49.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam used in seat and back cushion is moulded in density min 48 kg/m3, and hardness load 15 ± 2 kgf as per is:7888 for 25% compression. tilt mechanism, spines & spine connector: the seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. the cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. the s shaped spines moulded in high strength glass filled poly amide and the spine connector moulded in glass filled poly amide form the back spine structure involved in multi dimensional recline motion. the variable tilt angle recline motion can be adjusted with 3 position tilt limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. adjustable armrests: the assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled poly amide: the height adjustment feature should be button operated having adjustment of 6.6±0.5cm. the armrest top should be made up of integral skin pu moulded over plastic inner moulded in glass filled poly amide. pneumatic height adjustment: the seating height can be adjusted with a pneumatic gas lift having an adjustment stroke of 9.2 ± 0.3 cm pedestal assembly: the pedestal should be injection moulded in glass filled poly amide and fitted with 5 nos. twin wheel castors. the pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors twin wheel castors :5 nos. twin wheel castos are injection moulded in poly amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal. 21 hod table of size 1500 x 750 x 743 understructure: the understructure is in prelam panels, made with plt boards.drawer storage units with different combinations to support tops, made with 18mmplt boards of different colours. modesty and back panels, made with 18mm plt boards. the pedestals/storages are fitted with necessary locks plt board tops (straight edges): wenge and savannah maple plt board used for making tops. pvc membrane tops (with profiles): 22 job display board with dimensions (1200x900x150)mm board having 9 mm ply 23 tool display board (1200x900x150)mm board having 9 mm ply 24 chemistry lab table of size 4130mm x 1540mm x 900mm with pp drop sink of size 560 x 355, single tap deck mounted 8 swing goose neck, ss peg board 550x420x55 with 25 pegs. two reagent shelves of width 1050 with glass shelf. c frames all cframes assemblies should be manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 (indian standard specification for steel tubes for furniture) and all sheet metal components should be of crca confirming to is code 513:1994. the suspended under bench welded units should be supported on heavy duty steel frames fully carrying the load of worktops. c frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. the c frame shall also have skirting at back bottom side. horizontal members should be made from rectangular pipes of 2mm thickness. 25 lab table of size 4130mm x 1540mm x 900mm frames all cframes assemblies should be manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 (indian standard specification for steel tubes for furniture) and all sheet metal components should be of crca confirming to is code 513:1994. the suspended under bench welded units should be supported on heavy duty steel frames fully carrying the load of worktops. c frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. the c frame shall also have skirting at back bottom side. horizontal members should be made from rectangular pipes of 2mm thickness. cross sectional dimensions of the pipe should be 60 x 30 x 2 mm. 26 locker unit with 4 door plu + lkr (base) with stand size 1830hx380wx450d, stackibilit the add on units can be stacked width wise to formbank of lockers having common side panel, locking cam lock with lock leveroption of hasp arrangement, material crca 0.6mmthickness, rigid knockdown construction, shelf uniformly distributed load capacity per each shelf level is 35 kg maximum, hat self 4 door model at the top, finish epoxy polyester powder coated to the thickness of 50 microns (+/ 10).ventilation attractive punched pattern for ventilation 27 long table of size 1800 x 900 x 740 worktop 25 mm thick plb tops with 2mm thick pvc edge beading understructure c – frames legs 1.6 mm thick m.s c­frame supporting the top. legs dia. 38.1 x 1.6 mm thick m.s erw tube. 28 meeting table with 10 seater with wire manager of size 2400w * 1200d * 750h h top all tops are made from 25mm thick pre—laminated board with 2mm thick. pvc edge beading side panel all side panels are made from 25mm thick pre—laminated twin with 2mm thick pvc lipping of same color on sides and 0.8mm pvc lipping of matching color on the bottom curve, modesty these panels are made from 18mm thick pre laminated board with 0.8mm pvc lipping of matching color, access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical/data voice. sockets from top, powder coated switch mounting tray made from 0.8mm and 1.2mm m.s sheet. switches to be mounted on tray as per requirement. provision for mounting 8 — module anchor roma switch plate on switch mounting tray. wire manager rehau made from rau pvc 1309/7558 (black color) 29 notice board with size 4 x 3 surface material woolen felt / fabric in various colours,core material 9 mm thick soft board,backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour or 0.16 to 0.25 mm thick isi mark gp sheet,aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness 30 reception table double arch with dl top of size 2410 x 1065 x 725 worksurface, 1035 counter, d l top top clean matt pu finish 18mm thick inside radius 700.0 mm outside radius – 1350.0 mm depth – 650 mm glass frosted glass 10mm thick diamond cut finishing on edges inside radius – 1202.5mm outside radius – 1402.5mm depth – 200mm, modesty panel ms perforated sheet below worksurface : 0.8 mm (thick) x 665.0 mm (height) x 1345.0 mm (flat length) above worksurface : 0.8mm (thick) x 260 mm (height) x 1345.0 mm (flat length), legs ms tube 1.6 mm thick diameter 50.8 mm height 604 mm. 31 non magnetic small white board 4 x 3 surface material 0.62 to 0.72 mm thick laminate sheet with extra melamine surface,core material 8 mm thick particle board,backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour,aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness. 32 steel almirah of size 1981 x 916 x 486 mm multi bend construction and inter locking design and full length over apping doors and sides. three way bolting mechanism. spot welding & co2 welding. anticorrosion treated components, oven baked powder coating process. material thickness 0.9mm.top, bottom,lh & rh sides and back material thickness= 0.9mm,removable rh & lh main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm 33 steel rack of size 6x36x18 with six shelves prime quality crc sheet conforming to is 513d/10748/5986. the pitches of the slots at 19.05 mm, panel/shelves: 6 bnd bending process of 905l x 448d of load capacity 80 kgs. udl max per shelf. shelf material 0.8 mm thick ms sheet conforming to commercial quality cr 1, grade 340 of is 513, angle posts material and size rolled steel angle posts of 40 x 40 x 1.8 mm, m s sheet thickness of shelves and back (minimum) in mm 0.8, paint powder coated with lead free paint. 34 lab stool of circular type 30.0 +/ 0.5 cm and made up of 0.1+/ 0.012 cm thk cr steel. it is welded to the understructure and black powder coated ( dft 40 60 microns ). understructure assembly: the understructure is made of ms tube 2.2 +/ 0.03 cm x 0.16+/ 0.0128 cm thk ms erw tube. lt is welded ti the ms fabricated circular seat assembly and black powder coated ( dft 40 60 microns ). the understructure is provided with black pp injection moulded ferrules. 35 steel rack of size 2 6x36x18 with three shelves prime quality crc sheet conforming to is 513d/10748/5986. the pitches of the slots at 19.05 mm, panel/shelves: 6 bnd bending process of 905l x 448d of load capacity 80 kgs. udl max per shelf. shelf material 0.8 mm thick ms sheet conforming to commercial quality cr 1, grade 340 of is 513, angle posts material and size rolled steel angle posts of 40 x 40 x 1.8 mm, m s sheet thickness of shelves and back (minimum) in mm 0.8, paint powder coated with lead free paint. 36 office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side three drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock. 37 computer table of size 600w x 450d x 750h mm compact and easy to use . top made up of 1.5 cm medium density fiber. all the other panels are made of particle board. vacuum lamination of pvc has been done on the table to surface. 0.4mm lapping is used for all the other panels 38 office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18 mm thick pre laminated top size 1365 x 680 x 735 (approx.) with both side drawer unit one side three drawers & another side two drawers made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with both side drawer lock 39 principal table main desk of size 1800 x 900 x 740, eru of size 1550 x 450 x 705 made up of top 25 mm thick plain particle board (ppb) clad with 0.6mm thick post formed laminate and 1mm thick backing laminate (bdl). flat edge duly sealed with 2mm thick pvc beading., modesty 18mm thick plain particle board (ppb) clad with 1.0mm thick decorative laminate (dl) on both sides. edge sealed with 2mm thick pvc beading with 01 no. 3 drawers free standing pedestal. 40 office table with eru & pedestal of size 1350 x 750 x 750 mm + eru + pedestel main desk of size 1350 x 750 x 750 with eru of size 1200 x 450 x 750 & 01 no. 3 drawers pedestal: top panel made from 25 ±0.5 mm thk pre laminated boards as per is 12823 with 2 mm thick pvc beading on all sides. side panel the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm pvc beading on all sides. modestty 1 & 2 the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm thick pvc beading on all edges. the panel is made from 25 ±0.5 mm thk pre laminated boards as per is 12823 with 2 mm thick pvc beading on all sides, the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm pvc beading on all sides. the panel is made from 18 ±0,5 mm thk pre laminated boards as per is 12823 with 0.8 mm thick pvc beading on all edges. pedestal wooden panel ( 1 box+ 1 filling) back wooden panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with pvc beading on all sides. the panel is made from 9 ±0.5 mm thk pre laminated board. 41 steel table with stainless steel top of size 1180 x 750 x 750. worktop the top is in stainless steel brushed finish with plb insert for durability. easy to clean and maintain hygiene. side frames made from 30mm x 30mm x 1.5mm thick m.s powder coated tubes at base which are welded and are fixed to top with screws. the bottom ends are closed with plastic buffers. ms shade : s/g metallic dark grey (nerocoat 9000626), cross member made from 30mm x 30mm x 1.5mm thick m.s powder coated tube, which is welded and bolted to side frames. 42 teaching platform with the dimensions of length 6 ft x breadth 4 ft x height 1.5 ft with 19 mm plywood on top, shall be rectangular hallow box shape without legs. 43 teaching platform with the dimensions of length 12 ft x breadth 6 ft x height 1.5 ft with 19 mm plywood on top, shall be rectangular hallow box shape without legs. 44 wooden podium with dimensions: 45 h x 20 w x 15 d to 50 h x 25 w x 20 dpresenter side height: 40 to 45shelves: 20 h x 20 w x 10 d to 25 h x 25 w x 12 dproduct weight: 50 to 55 lbs.shipping weight: 65 to 70 lbs.material: scratch resistant high pressure laminate.the top of the table shall be provided 19 mm ost. the table shall be neatly finished and polished. 45 seminar chair with understructures could be revolving or fixed type as per need. option of hinge type and retractable desk let.desklet 100% voc free powder coating knock down design reducing transportation emissions designed for long life 46 office table of size 900 x 590 x 750 made of ms erw square tube 18 mm x 25mm x 1.2mm thick with pre laminated top size 1199 x 590 x 750 mm thick with single side one drawers, drawer unit made of .5mm thick ms crca sheet, all steel components have powder coated paint 47 non magnetic long white board 8 x 4 size and surface material 0.62 to 0.72 mm thick laminate sheet with extra melamine surface,core material 8 mm thick particle board,backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour,aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness. 48 double sided book rack with the dimensions width 900mm, height: 1850mm, depth: 600mm, rigid knockdown construction. construction, material crca0.8mmthickness, finish epoxypolyester powder coated to the thickness of 50 microns (+/ 10).number of adjustable shelf: five adjustable shelves on one side (total 12 loading levels). uniformlydistributed load capacity per each shelf is 80 kgmaximum. label holder & range indicator label holder & range indicator on eachmain unit for inserting labels. 49 single sided book rack with the dimensions width 900mm, height: 1850mm, depth: 316mm, rigid knockdown construction, material crca 0.8 mm thickness,finish: epoxypolyester powder coated to the thickness of 50 microns (+/ 10).,number of adjustable shelf five adjustable shelves. (total 6 loading levels). uniformlydistributed load capacity per each shelf is 80 kg maximum, label holder & range indicator label holder & range indicator on eachmain unit for inserting labels. 50 magazine rack with overall dimensions of all steel periodical display rack shall be 900mm(w)x450mm(d)x1830mm(h). rigid knockdown construction ,panels shall be made from crca 0.6 mm thick and front frame shall be made from crca 0.8 mm thick . crca d grade as per is 513 . there shall be 5 level racks , display tray shall be suitable for fullscape size magazines,periodicals, aesthetically appealing metal tray at an angle for easy viewing . receding facility to access the storage behind . sliding on plastic rollers . behind storage shelving each of 5 level has a behind storage shelf . uniformly distributed load capacity per each shelf is 40 kg . leveler shall be screw type with hex plastic base and finish shall be epoxy polyester powder coated to the thickness of 50 microns. 51 almirah with glass door size 916mm(w) x 486mm(d) x 1980mm #(h) # excluding leveler, construction & material • welded construction, • 0.7mm thk (±0.07mm) crca* for shelf,• 0.8mm thk (±0.08mm) high yield strength crca** for doors and back,• 0.9mm thk (±0.08mm) crca* for all other components,crca ‘d’ grade as per is:513,crca ‘d’ grade high yield strength as per is:513,locking & handle • brass handle with • two way locking mechanism with shooting bolt, shelves • height wise adjustable shelf mounting • uniformly distributed load capacity per each full shelf is 40 kg maximum, • 4nos. of adjustable full shelf, • box file a4 size (85wx345hx285d) can be stored vertically on three shelves and the clear space above fourth shelf is 240mm,• m10 screw type leveler with hex plastic base,finish • epoxy powder coated to the thickness of 50 microns (+ 10). 52 dual desk is specially designed for rugged use with overall dimentions of l1054 x w980 x h760 mm and all edges are fillet. the desk is made of pressed formed ms crca section & crca tube fitted with pre laminated particle board top, seat & back with injection molded ppcp edge. hanger for water bottle and bag. space for keeping pen, pencil and scale. the overall appearance of the product shall be as per photograph.top injection molded ppcp edge. size : 1054x450x18 mm thk. particle board.seat injection molded ppcp edge. seat height : 450 mm , seat size : 1054x304x18 mm thk. particle board.back injection molded ppcp edge. back size : 1054x154x18 mm thk. particle board.shelf shelf 0.8 mm thk. crca sheet. bullnose front edge with stiffner 1 mm thk crca.modesty modesty 0.8 mm thk. crca sheet. slot perforated.tie members horizontal tie members 25x25x1.2 mm thk. crca pipe.footrest footrest pressed formed crca section 1.5 mm thk. side frame side frame c section pressed formed 1 mm thk.crca sheet welded with 25x50x1.2 mm thk tube. and back rest pipe ø25 x 1.2 mm thk. top end rounded.cap & levellers all pipe caps are curved ppcp material.finish all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. 53 item deleted vide e.n.c. bcd , patna letter no. 6010(bh) anu dated 11.10.2021 54 item deleted vide e.n.c. bcd, patna letter no. 6010(bh) anu dated 11.10.2021 55 dressing table of size 460w x 486d x 1710h mm , mirror w x h: 362 mm x 1156 mm dressing table comes with a long mirror, two storage drawers, and a stool. available in wenge color, the dresser is crafted from good quality mdf wood, making it sturdy and lasting. the shelves of this stylish dressing table can be used to keep items like perfume bottles, hair products, and medicines, for that clutter free look. the stool, also wenge color with an orange colored cushion, offers comfortable seating, while the full length mirror is perfect to dress up, and check your overall ensemble. 56 steel almirah with mirror of size 900w x 507d x 1950h mm rafted from prime steel, your slimline cupboard will be resistant to corrosion and peststhis cupboard comes with 2 easily adjustable shelvesthe hanging rod inside the cupboard ensures ample space for your daily wear, suits, sarees and/or dressesknock down construction makes shifting and handling of slimline easieravailable with over head unit option to maximize vertical space usage you can also choose to have a mirror with slimlinestylish snap shut flush handle enhances slimline’s aesthetics. 57 auditorium chair seat/back assembly: the seat and back are made up of 1.2±0.1 cm. thick hot pressed plywood measured as per qa method described in ocp qlta p14 18 and upholstered with fabric and moulded polyurethane foam. the back is, flexing type.back size 47.0 cm. (w) x 51.0 cm. (h), seat size 47.0 cm. (w) x 47.0 cm. (d). 2. high resilience (hr) polyurethane foam: the hr polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf as per is:7888 for 25% compression.3. armrests :the one piece armrests are made of black integral skin polyurethane foam with 50 70 shore hardness and reinforced with m.s. insert. the armrests are scratch and weather resistant.5. understructure assembly: it is made of dia. 2.54±0.03cm. x 0.2±0.016cm. thk. m.s.e.r.w. tube with connecting strips made of 0.5 ± 0.05 cm. thk. hr steel welded to it for holding the seat. the assembly is powder coated ( dft 40 60 microns ).the auditorium chair is designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre requisite godrej doc no: stg 129368.overall width 57.0, depth 57.0, height 86.0, seat height 44.0 cm. 58 movable chair made out of stainless steel, understructure seat and back are made up of injection moulded high impact strength polypropylene polymer compound with indoor grade uv resistance *seat size: 52.5 cm. (w) x 53.2 cm. (d), * back size : 51.6 cm. (w) x 40.5 cm. (h) .s.s. understructure: the tubular welded frame is made from dia 2.22 ± 0.03 cm x o.12 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.12 ± 0.0128 cm stainless steel 202 grade tube. the tubes are buff polished to give shiny finish. 59 hostel bed made out of steel with overall size length 1994mm, width 907mm, height 822/623/ rest height 450mm, structure of metal bed frame including legs and head structure mild steel pipe, head board shape of headboard semi circular, thickness of hollow section in structure (1.2mm), support panel for placement of mattresses mild steel hollow box rectangular section, thickness of support panel (in 1.2mm), material of head board mild steel erw tube is:7138 square tube of 38.1 mm x 1.2 mm thick, material of mattress panel ms perforated / sheet, thickness of mattress panel 1.2 (mm), size of support members in mm (±5 mm) 50 x 50mm, number of support members is 04 nos., paint /finish of all m s parts powder coating 60 micron. 60 dining table of 8 seater with wire manager of size 2400w * 1200d * 750h h top all tops are made from 25mm thick pre—laminated board with 2mm thick. pvc edge beading side panel all side panels are made from 25mm thick pre—laminated twin with 2mm thick pvc lipping of same color on sides and 0.8mm pvc lipping of matching color on the bottom curve, modesty these panels are made from 18mm thick pre laminated board with 0.8mm pvc lipping of matching color, access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical/data voice. sockets from top, powder coated switch mounting tray made from 0.8mm and 1.2mm m.s sheet. switches to be mounted on tray as per requirement. provision for mounting 8 — module anchor roma switch plate on switch mounting tray. wire manager rehau made from rau pvc 1309/7558 (black color). 61 item deleted vide e.n.c. bcd, patna letter no. 6010(bh) anu dated 11.10.2021 62 study chair is made of blow molded high density polyethylene andis fixed on the understructure assembly with the help of stainless steel pop rivets.seat: seat is made of blow molded high density polyethylene and is fixed on the understructure assembly.understructure all side metal frames and cross connectors are made from mild steel erw tubes ,40 x 20 x 2mm thk(approx. 14 swg) as per 1s:7138 which are welded togetherthe welded structures and cross connectors are coated with min 45 micron thickness of epoxy polyester coating. bag storage tray made of 04 mild steel rod (as per 15:432) forms a cage at the bottom and is welded to the main understructure. seat support channel made of 1mm thk mild steel sheet (as per is:513) is welded to the understructure for fixing seat. plastic caps plastic caps made of polypropylene are provided on the foot rest side tubes and back leg tubes adding more aestheic value to the product. 63 study table with all sides metal frames and cross connectors are made from mild steel erw tubes ,40 x 20 x 2mm thk(approx. 14 swg) as per 15:7138 which are welded together.the welded structures and cross connectors are coated with min 45 micron thickness of epoxy polyester coating. shelf tray and desktop mounting brackets made of 2mm thk mild steel sheet(as per 15:513) are welded to the understructure for fixing shelf tray and desktop respectively. hooks are provided ori the vertical side frames on both sides of the desk for hanging bags/bottles. they are made from 09 mild steel rod (as per 15:432) and are welded to the main understructure plastic caps: plastic caps made of polypropylene are provided on the foot rest side tubes and front leg tubes adding more aestheic value to the product. ...

Building Construction Department - Bihar

31163384 supplying and installation furniture for new govt. polytechnic, khagaria 1 1 drawer office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side one drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock. 2 2 seater sofa overall size 1130w x 700d x 785 h cm, seat height 43.5 cm side frame assembly: the side frame assembly is fitted to the two ends of the connecting beam assembly to form, the leg cum armrest assembly. it is made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick ms e.r.w. tube and powder coated ( dft 40 60 microns ) . the ends are fitted with abs moulded end caps, 3. seatrest assembly:the seat rest assembly consists of a fabricated inner frame assembly insitu moulded high resilience ( hr ) polyurethane foam having density = 45 + / 2 kg / m3 with hardness load 25 ± 2 kgf as per is:7888 for 25% compression of the foam. the complete moulded seat rest assembly is covered with a replaceable fabric upholstery cover *seat size: 52.0cm. ( w ) x 50.0cm. ( d ) x 6.0cm. ( t ) , 4. backrest assembly:the backrest assembly is flexing type and consists of a fabricated inner frame assembly insitu moulded with high resilience ( hr ) polyurethane foam having density = 45 +1 2 kg / m3 with hardness load 14 ± 2 kgf as per is:7888 for 25% compression of the foam. the complete moulded backrest assembly is covered with a replaceable fabric upholstery cover. *back size: 52.0cm. ( w ) x 59.0cm. ( h ) x 6.0cm. ( t ) , 5. adj. glides: the adj glide is injection moulded in black nylon & fitted to the front end of side frame assembly along with abs moulded adj. glide base to take care or unleveled floor surface 3 ( 3+1+1 ) seater sofa the side frame assembly made of 38mm dia 2mm thick is fitted to the two ends of the connecting beam assembly to form the leg cum armrest assembly. it is made of a ms. e.r.w. tube duly powder coated. the ends are fitted with abs moulded end caps. tie member: it is the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members are used to connect the side frames. the tie member is made of ms. e.r.w. tube 40mmx40mm 2mm thick duly powder coated. the seat / back assemblies are mounted on the tie member. l bracket of 6mm thick steel connects the back to the tie member assembly. seat foam is of 45 + / 5 kg / m3 and back foam is of 32 + / 5 kg / m3 with hardness of 25+ / 2 on hampden m / c. at 25% compression of the foam. seat size 52cm widex50cm deep and back size 52 cm wide and 60cm high. back of the sofa flexes for additional comfort 1 seater –601mmwx700mmdx 810mmh, 3 seater –1640w x 700d x 785 h cm 4 3 seater steel chair cross beammade of ms erw rectangular black powder coated tube of 80 x 40 x 2 mm leg & arm rest chrome plated made of cold rolled steel. arm rest & leg assembled to the cross beam with m10 x 100 mm bolts. seat & back 1.6mm thick powder coated perforated shell of cold rolled ms sheet. side bar of chrome plated solid steel 30 x 12 mm ( din 174 ) with flunting & plastic insert .the shell is assembled on the cross beam with help of m8 bolts the overall dimension is 1608mm ( l ) x 695mm ( h ) x 555mm ( d ) , seat height : 405mm 5 bed side locker with one cabinet and one drawer unit . the drawer as well as cabinet is provided with cam lock. there is a gap between the drawer unit and cabinet, to keep the general items for frequent use . castors are provided for easy handling. astainless steel tray is provided at top with raised borders on three sides dimensions ( l ) 402mmx ( w ) 422mmx ( h ) 840mm. drawer has ball slide for easy operation and lock for safety. telescopic ball slides are used for easy and smooth operation of the drawer. plastic moulded castor, 2 castor with lock. recessed handle is provided to open the cabinet door. 6 work bench of size 4’ x 3’, angle 1.5 x 1.5 with 2 pair of legs with work top with overall dimensions. 1200mm l x 900mm d x 950mm h, the worktop of mdf ext garde is12406 wood. max udl 1500kgs the worktop should be made of various layers of beech wood which are planed, glued and pressed together. this should make the work top non deformable, and load and wear resistant. this shall be covered with 4mm steel sheet. leg: the bench leg should be powder coated should be 80mm l x 1265mm d x 960mm h. back bracing for stability 7 centre table of size 1200w x 600d x 378h built with the extremely durable rubberwood, the table can hold weight up to 25kgs. with a very suitable cappuccino color, the table will complement any style of décor. the tapered legs provide stable support. it’s free of flaws design can accommodate your books, magazines, laptop and coffee mugs, all at once. the well thought out dimensions of the table make it easier to position it anywhere in the house 8 work bench of size 8’ x 4’ with 2 pair of legs with work top with overall dimensions. 2400mm l x 1200mm d x 950mm h, the worktop of mdf ext garde is12406 wood. max udl 1500kgs made of various layers of beech wood which are planed, glued and pressed together. this should make the work top non deformable, and load and wear resistant. bench leg: the bench leg should be powder coated should be 80mm l x 1265mm d x 960mm h. back bracing for stability 9 executive chair with cushioned seat is made of injection molded plastic outer & inner. plastic inner is upholstered with stitched cover and moulded high resilience polyurethane foam of density 4542 kg / m*, and hardness load 16 + 2 kgf as per 15:7888 for 25% compression.the stitched cover is made from spacer fabric and leatherette seat size : 47.0 cm. ( w ) x 48.0 cm. ( d ) , tunular frame : the powder coated ( dft 40 60 micron ) tubular frame is cantilever type & made of 02.5440.03 cm x 0.240.016 cm thk ms erw tube.the back connected to frame through powder coated ( dft 40 60 micron ) high pressure die cast connector. 10 office chair with seat and back are made from seasoned wood and plywood. the same is upholstered with black synthetic leather and polyurethane foam. back size 46.0cm ( w ) x27.0cm ( h ) . seat size 46.0cm ( w ) x40.0cm ( h ) . the armrest is gas assisted injection moulded from black polypropylene. the understructure assembly is a cantilever type frame.width of the chair 58cm, depth 56.5cm, height 87.5cm, seat height 48cm. 11 office chair : the seat and back are made up of 1.2 ±0.1cm. thick hot pressed plywood measured as per qa method described in ocp qlta p14 18 and upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam is designed with contoured lumbar support for extra comfort. back size 49.0 cm. ( w ) x 47.0 cm. ( h ) , seat size 49.0 cm. ( w ) x 44.0 cm. ( id ) high resilience ( hr ) polyurethane foam: the hr polyurethane foam is moulded with density = 45 ±2 kg / m3 and hardness load 16 ± 2 kgf as per is:7888 for 25% compression. 12 principal chair: the seat is made up of 1.4± 0.1 chick hot press 4 plywood upholstered with fabric and moulded polyurethane foam. it has a seat depth adjustment of 5.0±0.3 cm integrated in the seat through a sliding mechanism. seat size: 50.0cm ( w ) x 49.0cm ( d ) .the back is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustable lumbar support made of injection moulded polypropylene having an adjustment of 6.0±0.1cm.backsize: 50.0cm ( w ) x68.0 cm ( h ) .the polyurethane foam for seat is of density 55± 5kg / m3. it is made of glass filled polyamide arm structure with pu arm top and height adjustment of 7.0 ±0.5cm.the arm top has swivel and to for movements. to for movement is 6.0± 0.5cm.the inner tube of armrest is chrome plated. the mechanism is designed with the following features:• 360° revolving type.• centre tilt synchro• 3 position ( including upright lock ) giving option of variable tilt angle to the chair with anti shock feature. the headrest is injection moulded din glass filled polypropylene which is upholstered with foam and fabric has an adjustment of 6.0± 0.1cm & its assembled over the full back chair. the pneumatic height adjustment is chrome plated with an adjustment stroke of 9.0 ± 0.3cm.the pedestal is high pressure die cast polished aluminum and fitted with 5 nos. twin wheel castors. the pedestal is 65.0±0.5 cm p.c.d. the twin wheel castors are injection moulded in black glass filled polyamide having 6.0±0.1cm wheel diameter. the chrome plated tubular frame is made of día2.8±0.03cm x0.2±0.02 cm the m.s. round tube. the frame is fitted with plastic caps made of injection moulded glass filled polypropylene. 75 ( w ) * 75 ( d ) * 115 130 ( h ) * 44.5 53.5 ( sh ) . 13 computer chair with seat and back are made uo injection moulded high impact strenght polypropylene polymer compound with indoor graade uv resistance.the tubular weled frame is made from dia2.22 + / 0.03cmx 0.12+ / 0.0128 cm and 3.5+ / 0.03 cm x 0.12+ / 0.0128 am stainless steel 202 grade tube.the tube are buff polished to give shiny finish. cm. the shoes are made of high impact strenght polypropylene polymer. compond with indoor grad uv resistance and pressed fitted with tubularfram. size : ( w ) 52.5cm* ( d ) 55.8cm* ( h ) 84.5cm* ( seat h ) 45.0 cmseat size 52.5cm ( w ) *53.2 cm ( d ) back size 51.6 cm ( w ) *40.5 cm ( h ) . 14 office chair mid back pneumatic height adjustment cushioned revolving chair made up of 1.2cm thick hot pressed ply wood seat & back upholstered with fabric with moulded polyurethane foam together with moulded abs seat & back integral skin polyurethane with reinforced with m.s. insert. the tilt mechanism adjustment upright locking, 360 degree revolving type fitted with 05 nos. twin wheel castor dia 5 cm. 15 compactor on 12 feet rail length moves on rails. the cabinet body rigid knock down construction made of 0.8 thick crca steel eonforming to is: 513 gld. body units are bolted to undercarriage. optimizer height from ground is 2081 ] mm ( 1930 hody+ 65 under 35 channel systems ] finish: — the bodies inciuding shelves are given anti rust surface treatment 8‘ are powder coated with epoxy polyester powder oven backed with a controlled temperature of 130 deg. to 200 deg. c.sheif:l made of 0.8 thick crca steel conforming to is;513 gd. max load bearing capacin is fit! kg. udl per ahett x 5:400 kg. eauh cabinet. undercarriage: the undercarriage is a welded trams made of hr sheet 3.15 mm thick conforming [ 0 is; 1d?48movement of the system: push pull configuration { type p utype f~2 } movement of units achieved pushing or putting chrome plated 0 handle fitted suitable height on one side at body. 16 conference table of 30 seater capacity shall be an eco modular conference table enables various configurations to suit different conference rooms. it is made of particle board and has wire management facilities for uncluttered wiring. it has profiled legs with twin colored modesty for better looks, double 1350.0wx 600.0dx 750.0h, work surface top thickness is 25mm plb with pvc beading allover, legs modesty wire manager made from 18mm thick plt having curved profile.made from plt ( prelaminated twin ) boards 18mm thick in two shades. a wire manager running along the width of desk fitted on the modesty panel from inside. 17 corner table of size 530w x 450d x 450h built with the extremely durable rubberwood, with a very suitable cappuccino color, the table will complement any style of décor. the tapered legs provide stable support. it’s free of flaws design can accommodate your books, magazines, laptop and coffee mugs, all at once. the well thought out dimensions of the table make it easier to position it anywhere in the house. 18 dining table of 8 seater with wire manager of size 2400w * 1200d * 750h h top all tops are made from 25mm thick pre—laminated board with 2mm thick. pvc edge beading side panel all side panels are made from 25mm thick pre—laminated twin with 2mm thick pvc lipping of same color on sides and 0.8mm pvc lipping of matching color on the bottom curve, modesty these panels are made from 18mm thick pre laminated board with 0.8mm pvc lipping of matching color, access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical / data voice. sockets from top, powder coated switch mounting tray made from 0.8mm and 1.2mm m.s sheet. switches to be mounted on tray as per requirement. provision for mounting 8 — module anchor roma switch plate on switch mounting tray. wire manager rehau made from rau pvc 1309 / 7558 ( black color ) . 19 file cabinet with 4 drawer width: 470mm, height: 1320mm, depth: 620mm , rigid knockdown construction, material: top, side & drawer frontmade from0.7mm thk **crca, drawer inside cover, side back side made from0.6mmthk **crca, back, bottom, drawer bottommade from 0.5mmthk **crca, **crcasteel confirming to is 513, grade d, label holder snap on type plastic label holder on drawer fronts, locking & anti tipping arrangement centralized lockingwith camlock& having antitipping arrangement to ensure that when one , drawer is opened for use, it does not allow other drawers to be opened, finish epoxy polyester powder coated to the thickness of 50 microns ( + / 10 ) . 20 fire proof cabinet shall be designed to protect the contents ( paper media documents ) against the fire hazard.shell: the external shell of the cabinet shall be of steel of minimum 2 mm thick and internal shell of steel of 1.6 mm thick, both conforming to is 513. further fortified by suitable in situ insulating fire resistant barriers to meet the required protection. the overall protection to the contents shall be minimum 70 mm on all six sides. door: the external door of the cabinet shall be of steel of minimum 2 mm thick conforming is 513 and further fortified with hard plate over the lock for burglary protection and in situ insulating fire resistant barrier material to meet required fire protection.  bolt work: the door shall be secured by four way locking mechanism / bolt work with minimum 8 moving shooting bolts of 20 mm diameter. door & body fitment: the door fits in the cabinet having tongue and groove construction that stops hot gases and high temperature to pass through and withstand temperature up to 1010 deg.c. locking: the frrc shall be equipped with a dual control high precision key lock of minimum six levers. the lock body shall be of zinc alloy and the levers in the lock shall be of brass conforming to is 410. there shall not be any dummy lever in the lock. the storage capacity shall be minimum 650 liters with minimum usable internal sizes in mm as 1620 ( h ) x 670 ( w ) x 599 ( d ) .the cabinet shall be provided with minimum four nos. adjustable shelves. 21 office chair with seat / back assembly: the cushioned seat assembly consists of seat base moulded in glass filled poly amide, moulded polyurethane foam & upholstered with high stretch knitted polyester fabric. the cushioned back assembly consists of back inner moulded in polypropylene in situ moulded with polyurethane foam & upholstered with high stretch knitted polyester fabric. back size : 45.5 cm. ( / 1 / ) x 53.0 cm. ( h ) seat size : 48.5 cm. ( w ) x 49.0 cm. ( d ) high resilience ( hr ) polyurethane foam: the hr polyurethane foam used in seat and back cushion is moulded in density min 48 kg / m3, and hardness load 15 ± 2 kgf as per is:7888 for 25% compression. tilt mechanism, spines & spine connector: the seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. the cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. the s shaped spines moulded in high strength glass filled poly amide and the spine connector moulded in glass filled poly amide form the back spine structure involved in multi dimensional recline motion. the variable tilt angle recline motion can be adjusted with 3 position tilt limit feature which should be inbuilt in seat base and the tension ( return force ) should be user weight dependent. adjustable armrests: the assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled poly amide: the height adjustment feature should be button operated having adjustment of 6.6±0.5cm. the armrest top should be made up of integral skin pu moulded over plastic inner moulded in glass filled poly amide. pneumatic height adjustment: the seating height can be adjusted with a pneumatic gas lift having an adjustment stroke of 9.2 ± 0.3 cm pedestal assembly: the pedestal should be injection moulded in glass filled poly amide and fitted with 5 nos. twin wheel castors. the pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors twin wheel castors :5 nos. twin wheel castos are injection moulded in poly amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal. 22 hod table of size 1500 x 750 x 743 understructure: the understructure is in prelam panels, made with plt boards.drawer storage units with different combinations to support tops, made with 18mmplt boards of different colours. modesty and back panels, made with 18mm plt boards. the pedestals / storages are fitted with necessary locks plt board tops ( straight edges ) : wenge and savannah maple plt board used for making tops. pvc membrane tops ( with profiles ) : 23 job display board with dimensions ( 1200x900x150 ) mm board having 9 mm ply 24 tool display board ( 1200x900x150 ) mm board having 9 mm ply 25 chemistry lab table of size 4130mm x 1540mm x 900mm with pp drop sink of size 560 x 355, single tap deck mounted 8 swing goose neck, ss peg board 550x420x55 with 25 pegs. two reagent shelves of width 1050 with glass shelf. c frames all cframes assemblies should be manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 ( indian standard specification for steel tubes for furniture ) and all sheet metal components should be of crca confirming to is code 513:1994. the suspended under bench welded units should be supported on heavy duty steel frames fully carrying the load of worktops. c frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. the c frame shall also have skirting at back bottom side. horizontal members should be made from rectangular pipes of 2mm thickness. 26 lab table of size 4130mm x 1540mm x 900mm frames all cframes assemblies should be manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 ( indian standard specification for steel tubes for furniture ) and all sheet metal components should be of crca confirming to is code 513:1994. the suspended under bench welded units should be supported on heavy duty steel frames fully carrying the load of worktops. c frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. the c frame shall also have skirting at back bottom side. horizontal members should be made from rectangular pipes of 2mm thickness. cross sectional dimensions of the pipe should be 60 x 30 x 2 mm. 27 locker unit with 4 door plu + lkr ( base ) with stand size 1830hx380wx450d, stackibilit the add on units can be stacked width wise to formbank of lockers having common side panel, locking cam lock with lock leveroption of hasp arrangement, material crca 0.6mmthickness, rigid knockdown construction, shelf uniformly distributed load capacity per each shelf level is 35 kg maximum, hat self 4 door model at the top, finish epoxy polyester powder coated to the thickness of 50 microns ( + / 10 ) .ventilation attractive punched pattern for ventilation 28 long table of size 1800 x 900 x 740 worktop 25 mm thick plb tops with 2mm thick pvc edge beading understructure c – frames legs 1.6 mm thick m.s c­frame supporting the top. legs dia. 38.1 x 1.6 mm thick m.s erw tube. 29 bed mattress of size ( l ) 1900 x ( w ) 900 x ( h ) 100 mm providing and supplying sheet bed mattress 100mm the bed should be provided with 40 density 100mm thick single section pu from mattress which should be covered with heavy helium material is water proof , flame retardent vapour and x ray permeablee.the zip and stiches for the mattress cover should be concealed.the manufacturer should be compliant with iso 9001 , 14001, 13485 and ohsas 1800 and ce certification. the work shall be carried as per instruction of engineer in charge. 30 meeting table with 10 seater with wire manager of size 2400w * 1200d * 750h h top all tops are made from 25mm thick pre—laminated board with 2mm thick. pvc edge beading side panel all side panels are made from 25mm thick pre—laminated twin with 2mm thick pvc lipping of same color on sides and 0.8mm pvc lipping of matching color on the bottom curve, modesty these panels are made from 18mm thick pre laminated board with 0.8mm pvc lipping of matching color, access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical / data voice. sockets from top, powder coated switch mounting tray made from 0.8mm and 1.2mm m.s sheet. switches to be mounted on tray as per requirement. provision for mounting 8 — module anchor roma switch plate on switch mounting tray. wire manager rehau made from rau pvc 1309 / 7558 ( black color ) 31 notice board with size 4 x 3 surface material woolen felt / fabric in various colours, core material 9 mm thick soft board, backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour or 0.16 to 0.25 mm thick isi mark gp sheet, aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness 32 magazine rack with overall dimensions of all steel periodical display rack shall be 900mm ( w ) x450mm ( d ) x1830mm ( h ) . rigid knockdown construction , panels shall be made from crca 0.6 mm thick and front frame shall be made from crca 0.8 mm thick . crca d grade as per is 513 . there shall be 5 level racks , display tray shall be suitable for fullscape size magazines, periodicals, aesthetically appealing metal tray at an angle for easy viewing . receding facility to access the storage behind . sliding on plastic rollers . behind storage shelving each of 5 level has a behind storage shelf . uniformly distributed load capacity per each shelf is 40 kg . leveler shall be screw type with hex plastic base and finish shall be epoxy polyester powder coated to the thickness of 50 microns. 33 patient bed with overall size ( l ) 2106mm x ( w ) 914mm x ( h ) 614mm , head board / leg board frame ms erw round tube thickness 1.6mm , lying surface 1.0mm crca sheet leg shoe neoprene rubber with reinforced metal washer for avoiding wear of legs. mosquito net pole holder provision for mounting of mosquito net pole, iv pole holder provision for mounting of iv pole , powder coating anti rust thermosetting epoxy polyster , formulated to fulfill the requirement for surface protection maximum patient load 135 kg . 34 reception table double arch with dl top of size 2410 x 1065 x 725 worksurface, 1035 counter, d l top top clean matt pu finish 18mm thick inside radius 700.0 mm outside radius – 1350.0 mm depth – 650 mm glass frosted glass 10mm thick diamond cut finishing on edges inside radius – 1202.5mm outside radius – 1402.5mm depth – 200mm, modesty panel ms perforated sheet below worksurface : 0.8 mm ( thick ) x 665.0 mm ( height ) x 1345.0 mm ( flat length ) above worksurface : 0.8mm ( thick ) x 260 mm ( height ) x 1345.0 mm ( flat length ) , legs ms tube 1.6 mm thick diameter 50.8 mm height 604 mm. 35 non magnetic small white board 4 x 3 surface material 0.62 to 0.72 mm thick laminate sheet with extra melamine surface, core material 8 mm thick particle board, backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour, aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness. 36 steel top stool overall dimension: overall size diagonal sizes diagonal leg dia. 538mm ( h ) 470min 655max . top plate should made of ss202 made sheet with spin section of thickness 1mm and should non corresive. it should have a diameter of 350mm seat base should made of ms ring and rectangular tube. en8 screw having dia of 22mm should be used for height adjustment of the seat base .the round hub should be made of ms erw tube haiving dia of 38mm and thickness 2mm . the hub should be welded with the legs and it should accommodated and cover the lid screw mechanism. the understructure should consist of 4 legs made up of ms erw tube of dia 25.4mm and 1.6mm thick. the press formed pipe leg should give a round and clean lock. the legs should be provided with 4 nos of nylon 6 bush. all metal components should be pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbial epoxy polyster powder coating to fulfill the requirements bactarial protection against at last 2 commnly found bactaria in hospital environment ( gram positive and gram negative ) . safe working load must be 135 kg. 37 steel almirah of size 1981 x 916 x 486 mm multi bend construction and inter locking design and full length over apping doors and sides. three way bolting mechanism. spot welding & co2 welding. anticorrosion treated components, oven baked powder coating process. material thickness 0.9mm.top, bottom, lh & rh sides and back material thickness= 0.9mm, removable rh & lh main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm 38 steel rack of size 6x36x18 with six shelves prime quality crc sheet conforming to is 513d / 10748 / 5986. the pitches of the slots at 19.05 mm, panel / shelves: 6 bnd bending process of 905l x 448d of load capacity 80 kgs. udl max per shelf. shelf material 0.8 mm thick ms sheet conforming to commercial quality cr 1, grade 340 of is 513, angle posts material and size rolled steel angle posts of 40 x 40 x 1.8 mm, m s sheet thickness of shelves and back ( minimum ) in mm 0.8, paint powder coated with lead free paint. 39 lab stool of circular type 30.0 + / 0.5 cm and made up of 0.1+ / 0.012 cm thk cr steel. it is welded to the understructure and black powder coated ( dft 40 60 microns ) . understructure assembly: the understructure is made of ms tube 2.2 + / 0.03 cm x 0.16+ / 0.0128 cm thk ms erw tube. lt is welded ti the ms fabricated circular seat assembly and black powder coated ( dft 40 60 microns ) . the understructure is provided with black pp injection moulded ferrules. 40 steel rack of size 2 6x36x18 with three shelves prime quality crc sheet conforming to is 513d / 10748 / 5986. the pitches of the slots at 19.05 mm, panel / shelves: 6 bnd bending process of 905l x 448d of load capacity 80 kgs. udl max per shelf. shelf material 0.8 mm thick ms sheet conforming to commercial quality cr 1, grade 340 of is 513, angle posts material and size rolled steel angle posts of 40 x 40 x 1.8 mm, m s sheet thickness of shelves and back ( minimum ) in mm 0.8, paint powder coated with lead free paint. 41 office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side three drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock. 42 computer table of size 600w x 450d x 750h mm compact and easy to use . top made up of 1.5 cm medium density fiber. all the other panels are made of particle board. vacuum lamination of pvc has been done on the table to surface. 0.4mm lapping is used for all the other panels 43 office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18 mm thick pre laminated top size 1365 x 680 x 735 ( approx. ) with both side drawer unit one side three drawers & another side two drawers made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with both side drawer lock 44 principal table main desk of size 1800 x 900 x 740, eru of size 1550 x 450 x 705 made up of top 25 mm thick plain particle board ( ppb ) clad with 0.6mm thick post formed laminate and 1mm thick backing laminate ( bdl ) . flat edge duly sealed with 2mm thick pvc beading., modesty 18mm thick plain particle board ( ppb ) clad with 1.0mm thick decorative laminate ( dl ) on both sides. edge sealed with 2mm thick pvc beading with 01 no. 3 drawers free standing pedestal. 45 office table with eru & pedestal of size 1350 x 750 x 750 mm + eru + pedestel main desk of size 1350 x 750 x 750 with eru of size 1200 x 450 x 750 & 01 no. 3 drawers pedestal: top panel made from 25 ±0.5 mm thk pre laminated boards as per is 12823 with 2 mm thick pvc beading on all sides. side panel the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm pvc beading on all sides. modestty 1 & 2 the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm thick pvc beading on all edges. the panel is made from 25 ±0.5 mm thk pre laminated boards as per is 12823 with 2 mm thick pvc beading on all sides, the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm pvc beading on all sides. the panel is made from 18 ±0, 5 mm thk pre laminated boards as per is 12823 with 0.8 mm thick pvc beading on all edges. pedestal wooden panel ( 1 box+ 1 filling ) back wooden panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with pvc beading on all sides. the panel is made from 9 ±0.5 mm thk pre laminated board. 46 steel table with stainless steel top of size 1180 x 750 x 750. worktop the top is in stainless steel brushed finish with plb insert for durability. easy to clean and maintain hygiene. side frames made from 30mm x 30mm x 1.5mm thick m.s powder coated tubes at base which are welded and are fixed to top with screws. the bottom ends are closed with plastic buffers. ms shade : s / g metallic dark grey ( nerocoat 9000626 ) , cross member made from 30mm x 30mm x 1.5mm thick m.s powder coated tube, which is welded and bolted to side frames. 47 teaching platform with the dimensions of length 6 ft x breadth 4 ft x height 1.5 ft with 19 mm plywood on top, shall be rectangular hallow box shape without legs. 48 teaching platform with the dimensions of length 12 ft x breadth 6 ft x height 1.5 ft with 19 mm plywood on top, shall be rectangular hallow box shape without legs. 49 wooden podium with dimensions: 45 h x 20 w x 15 d to 50 h x 25 w x 20 d presenter side height: 40 to 45 shelves: 20 h x 20 w x 10 d to 25 h x 25 w x 12 d product weight: 50 to 55 lbs. shipping weight: 65 to 70 lbs. material: scratch resistant high pressure laminate. the top of the table shall be provided 19 mm ost. the table shall be neatly finished and polished. 50 seminar chair with understructures could be revolving or fixed type as per need. option of hinge type and retractable desk let. desklet 100% voc free powder coating knock down design reducing transportation emissions designed for long life 51 office table of size 900 x 590 x 750 made of ms erw square tube 18 mm x 25mm x 1.2mm thick with pre laminated top size 1199 x 590 x 750 mm thick with single side one drawers, drawer unit made of .5mm thick ms crca sheet, all steel components have powder coated paint 52 non magnetic long white board 8 x 4 size and surface material 0.62 to 0.72 mm thick laminate sheet with extra melamine surface, core material 8 mm thick particle board, backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour, aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness. 53 double sided book rack with the dimensions width 900mm, height: 1850mm, depth: 600mm, rigid knockdown construction. construction, material crca0.8mmthickness, finish epoxypolyester powder coated to the thickness of 50 microns ( + / 10 ) .number of adjustable shelf: five adjustable shelves on one side ( total 12 loading levels ) . uniformlydistributed load capacity per each shelf is 80 kgmaximum. label holder & range indicator label holder & range indicator on eachmain unit for inserting labels. 54 single sided book rack with the dimensions width 900mm, height: 1850mm, depth: 316mm, rigid knockdown construction, material crca 0.8 mm thickness, finish: epoxypolyester powder coated to the thickness of 50 microns ( + / 10 ) ., number of adjustable shelf five adjustable shelves. ( total 6 loading levels ) . uniformlydistributed load capacity per each shelf is 80 kg maximum, label holder & range indicator label holder & range indicator on eachmain unit for inserting labels. 55 almirah with glass door size 916mm ( w ) x 486mm ( d ) x 1980mm # ( h ) # excluding leveler, construction & material • welded construction, • 0.7mm thk ( ±0.07mm ) crca* for shelf, • 0.8mm thk ( ±0.08mm ) high yield strength crca** for doors and back, • 0.9mm thk ( ±0.08mm ) crca* for all other components, crca ‘d’ grade as per is:513, crca ‘d’ grade high yield strength as per is:513, locking & handle • brass handle with • two way locking mechanism with shooting bolt, shelves • height wise adjustable shelf mounting • uniformly distributed load capacity per each full shelf is 40 kg maximum, • 4nos. of adjustable full shelf, • box file a4 size ( 85wx345hx285d ) can be stored vertically on three shelves and the clear space above fourth shelf is 240mm, • m10 screw type leveler with hex plastic base, finish • epoxy powder coated to the thickness of 50 microns ( + 10 ) . 56 dual desk is specially designed for rugged use with overall dimentions of l1054 x w980 x h760 mm and all edges are fillet. the desk is made of pressed formed ms crca section & crca tube fitted with pre laminated particle board top, seat & back with injection molded ppcp edge. hanger for water bottle and bag. space for keeping pen, pencil and scale. the overall appearance of the product shall be as per photograph. top injection molded ppcp edge. size : 1054x450x18 mm thk. particle board. seat injection molded ppcp edge. seat height : 450 mm , seat size : 1054x304x18 mm thk. particle board. back injection molded ppcp edge. back size : 1054x154x18 mm thk. particle board. shelf shelf 0.8 mm thk. crca sheet. bullnose front edge with stiffner 1 mm thk crca. modesty modesty 0.8 mm thk. crca sheet. slot perforated. tie members horizontal tie members 25x25x1.2 mm thk. crca pipe. footrest footrest pressed formed crca section 1.5 mm thk. side frame side frame c section pressed formed 1 mm thk.crca sheet welded with 25x50x1.2 mm thk tube. and back rest pipe ø25 x 1.2 mm thk. top end rounded. cap & levellers all pipe caps are curved ppcp material. finish all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. 57 item deleted vide e.n.c bcd, patna letter no 6010 ( bh ) anu dated 11.10.2021 58 item deleted vide e.n.c bcd, patna letter no 6010 ( bh ) anu dated 11.10.2021 59 hostel bed made out of steel with overall size length 1994mm, width 907mm, height 822 / 623 / rest height 450mm, structure of metal bed frame including legs and head structure mild steel pipe, head board shape of headboard semi circular, thickness of hollow section in structure ( 1.2mm ) , support panel for placement of mattresses mild steel hollow box rectangular section, thickness of support panel ( in 1.2mm ) , material of head board mild steel erw tube is:7138 square tube of 38.1 mm x 1.2 mm thick, material of mattress panel ms perforated / sheet, thickness of mattress panel 1.2 ( mm ) , size of support members in mm ( ±5 mm ) 50 x 50mm, number of support members is 04 nos., paint / finish of all m s parts powder coating 60 micron. 60 dining table of 8 seater with wire manager of size 2400w * 1200d * 750h h top all tops are made from 25mm thick pre—laminated board with 2mm thick. pvc edge beading side panel all side panels are made from 25mm thick pre—laminated twin with 2mm thick pvc lipping of same color on sides and 0.8mm pvc lipping of matching color on the bottom curve, modesty these panels are made from 18mm thick pre laminated board with 0.8mm pvc lipping of matching color, access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical / data voice. sockets from top, powder coated switch mounting tray made from 0.8mm and 1.2mm m.s sheet. switches to be mounted on tray as per requirement. provision for mounting 8 — module anchor roma switch plate on switch mounting tray. wire manager rehau made from rau pvc 1309 / 7558 ( black color ) . 61 item deleted vide e.n.c bcd, patna letter no 6010 ( bh ) anu dated 11.10.2021 62 study chair is made of blow molded high density polyethylene andis fixed on the understructure assembly with the help of stainless steel pop rivets.seat: seat is made of blow molded high density polyethylene and is fixed on the understructure assembly.understructure all side metal frames and cross connectors are made from mild steel erw tubes , 40 x 20 x 2mm thk ( approx. 14 swg ) as per 1s:7138 which are welded togetherthe welded structures and cross connectors are coated with min 45 micron thickness of epoxy polyester coating. bag storage tray made of 04 mild steel rod ( as per 15:432 ) forms a cage at the bottom and is welded to the main understructure. seat support channel made of 1mm thk mild steel sheet ( as per is:513 ) is welded to the understructure for fixing seat. plastic caps plastic caps made of polypropylene are provided on the foot rest side tubes and back leg tubes adding more aestheic value to the product. 63 steel rack of size 6x36x18 with six shelves prime quality crc sheet conforming to is 513d / 10748 / 5986. the pitches of the slots at 19.05 mm, panel / shelves: 6 bnd bending process of 905l x 448d of load capacity 80 kgs. udl max per shelf. shelf material 0.8 mm thick ms sheet conforming to commercial quality cr 1, grade 340 of is 513, angle posts material and size rolled steel angle posts of 40 x 40 x 1.8 mm, m s sheet thickness of shelves and back ( minimum ) in mm 0.8, paint powder coated with lead free paint. 64 study table with all sides metal frames and cross connectors are made from mild steel erw tubes , 40 x 20 x 2mm thk ( approx. 14 swg ) as per 15:7138 which are welded together.the welded structures and cross connectors are coated with min 45 micron thickness of epoxy polyester coating. shelf tray and desktop mounting brackets made of 2mm thk mild steel sheet ( as per 15:513 ) are welded to the understructure for fixing shelf tray and desktop respectively. hooks are provided ori the vertical side frames on both sides of the desk for hanging bags / bottles. they are made from 09 mild steel rod ( as per 15:432 ) and are welded to the main understructure plastic caps: plastic caps made of polypropylene are provided on the foot rest side tubes and front leg tubes adding more aestheic value to the product. 65 office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side one drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock....

Building Construction Department - Bihar

31015414 supply of furniture and other items for govt. engineering college, arwal. ot d office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side one drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock. 2ss 2 seater sofa overall size 1130w x 700d x 785 h cm, seat height 43.5 cm side frame assembly: the side frame assembly is fitted to the two ends of the connecting beam assembly to form, the leg cum armrest assembly. it is made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick ms e.r.w. tube and powder coated ( dft 40 60 microns ) . the ends are fitted with abs moulded end caps, 3. seatrest assembly:the seat rest assembly consists of a fabricated inner frame assembly insitu moulded high resilience ( hr ) polyurethane foam having density = 45 + / 2 kg / m3 with hardness load 25 ± 2 kgf as per is:7888 for 25% compression of the foam. the complete moulded seat rest assembly is covered with a replaceable fabric upholstery cover *seat size: 52.0cm. ( w ) x 50.0cm. ( d ) x 6.0cm. ( t ) , 4. backrest assembly:the backrest assembly is flexing type and consists of a fabricated inner frame assembly insitu moulded with high resilience ( hr ) polyurethane foam having density = 45 +1 2 kg / m3 with hardness load 14 ± 2 kgf as per is:7888 for 25% compression of the foam. the complete moulded backrest assembly is covered with a replaceable fabric upholstery cover. *back size: 52.0cm. ( w ) x 59.0cm. ( h ) x 6.0cm. ( t ) , 5. adj. glides: the adj glide is injection moulded in black nylon & fitted to the front end of side frame assembly along with abs moulded adj. glide base to take care or unleveled floor surface 3ss 3 seater sofa the side frame assembly made of 38mm dia 2mm thick is fitted to the two ends of the connecting beam assembly to form the leg cum armrest assembly. it is made of a ms. e.r.w. tube duly powder coated. the ends are fitted with abs moulded end caps. tie member: it is the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members are used to connect the side frames. the tie member is made of ms. e.r.w. tube 40mmx40mm 2mm thick duly powder coated. the seat / back assemblies are mounted on the tie member. l bracket of 6mm thick steel connects the back to the tie member assembly. seat foam is of 45 + / 5 kg / m3 and back foam is of 32 + / 5 kg / m3 with hardness of 25+ / 2 on hampden m / c. at 25% compression of the foam. seat size 52cm widex50cm deep and back size 52 cm wide and 60cm high. back of the sofa flexes for additional comfort 1 seater –601mmwx700mmdx 810mmh, 3 seater –1640w x 700d x 785 h cm 3s wc 3 seater steel chair cross beammade of ms erw rectangular black powder coated tube of 80 x 40 x 2 mm leg & arm rest chrome plated made of cold rolled steel. arm rest & leg assembled to the cross beam with m10 x 100 mm bolts. seat & back 1.6mm thick powder coated perforated shell of cold rolled ms sheet. side bar of chrome plated solid steel 30 x 12 mm ( din 174 ) with flunting & plastic insert .the shell is assembled on the cross beam with help of m8 bolts the overall dimension is 1608mm ( l ) x 695mm ( h ) x 555mm ( d ) , seat height : 405mm wb a work bench of size 4’ x 3’, angle 1.5 x 1.5 with 2 pair of legs with work top with overall dimensions. 1200mm l x 900mm d x 950mm h, the worktop of mdf ext garde is12406 wood. max udl 1500kgs the worktop should be made of various layers of beech wood which are planed, glued and pressed together. this should make the work top non deformable, and load and wear resistant. this shall be covered with 4mm steel sheet. leg: the bench leg should be powder coated should be 80mm l x 1265mm d x 960mm h. back bracing for stability cnt centre table of size 1200w x 600d x 378h built with the extremely durable rubberwood, the table can hold weight up to 25kgs. with a very suitable cappuccino color, the table will complement any style of décor. the tapered legs provide stable support. it’s free of flaws design can accommodate your books, magazines, laptop and coffee mugs, all at once. the well thought out dimensions of the table make it easier to position it anywhere in the house wb b work bench of size 8’ x 4’ with 2 pair of legs with work top with overall dimensions. 2400mm l x 1200mm d x 950mm h, the worktop of mdf ext garde is12406 wood. max udl 1500kgs made of various layers of beech wood which are planed, glued and pressed together. this should make the work top non deformable, and load and wear resistant. bench leg: the bench leg should be powder coated should be 80mm l x 1265mm d x 960mm h. back bracing for stability ec cu executive chair with cushioned seat is made of injection molded plastic outer & inner. plastic inner is upholstered with stitched cover and moulded high resilience polyurethane foam of density 4542 kg / m*, and hardness load 16 + 2 kgf as per 15:7888 for 25% compression.the stitched cover is made from spacer fabric and leatherette seat size : 47.0 cm. ( w ) x 48.0 cm. ( d ) , tunular frame : the powder coated ( dft 40 60 micron ) tubular frame is cantilever type & made of 02.5440.03 cm x 0.240.016 cm thk ms erw tube.the back connected to frame through powder coated ( dft 40 60 micron ) high pressure die cast connector. oc a office chair with seat and back are made from seasoned wood and plywood. the same is upholstered with black synthetic leather and polyurethane foam. back size 46.0cm ( w ) x27.0cm ( h ) . seat size 46.0cm ( w ) x40.0cm ( h ) . the armrest is gas assisted injection moulded from black polypropylene. the understructure assembly is a cantilever type frame.width of the chair 58cm, depth 56.5cm, height 87.5cm, seat height 48cm. oc b office chair : the seat and back are made up of 1.2 ±0.1cm. thick hot pressed plywood measured as per qa method described in ocp qlta p14 18 and upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam is designed with contoured lumbar support for extra comfort. back size 49.0 cm. ( w ) x 47.0 cm. ( h ) , seat size 49.0 cm. ( w ) x 44.0 cm. ( id ) high resilience ( hr ) polyurethane foam: the hr polyurethane foam is moulded with density = 45 ±2 kg / m3 and hardness load 16 ± 2 kgf as per is:7888 for 25% compression. pc principal chair: the seat is made up of 1.4± 0.1 chick hot press 4 plywood upholstered with fabric and moulded polyurethane foam. it has a seat depth adjustment of 5.0±0.3 cm integrated in the seat through a sliding mechanism. seat size: 50.0cm ( w ) x 49.0cm ( d ) .the back is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustable lumbar support made of injection moulded polypropylene having an adjustment of 6.0±0.1cm.backsize: 50.0cm ( w ) x68.0 cm ( h ) .the polyurethane foam for seat is of density 55± 5kg / m3. it is made of glass filled polyamide arm structure with pu arm top and height adjustment of 7.0 ±0.5cm.the arm top has swivel and to for movements. to for movement is 6.0± 0.5cm.the inner tube of armrest is chrome plated. the mechanism is designed with the following features:• 360° revolving type.• centre tilt synchro• 3 position ( including upright lock ) giving option of variable tilt angle to the chair with anti shock feature. the headrest is injection moulded din glass filled polypropylene which is upholstered with foam and fabric has an adjustment of 6.0± 0.1cm & its assembled over the full back chair. the pneumatic height adjustment is chrome plated with an adjustment stroke of 9.0 ± 0.3cm.the pedestal is high pressure die cast polished aluminum and fitted with 5 nos. twin wheel castors. the pedestal is 65.0±0.5 cm p.c.d. the twin wheel castors are injection moulded in black glass filled polyamide having 6.0±0.1cm wheel diameter. the chrome plated tubular frame is made of día2.8±0.03cm x0.2±0.02 cm the m.s. round tube. the frame is fitted with plastic caps made of injection moulded glass filled polypropylene. 75 ( w ) * 75 ( d ) * 115 130 ( h ) * 44.5 53.5 ( sh ) . cc wa computer chair with seat and back are made uo injection moulded high impact strenght polypropylene polymer compound with indoor graade uv resistance.the tubular weled frame is made from dia2.22 + / 0.03cmx 0.12+ / 0.0128 cm and 3.5+ / 0.03 cm x 0.12+ / 0.0128 am stainless steel 202 grade tube.the tube are buff polished to give shiny finish. cm. the shoes are made of high impact strenght polypropylene polymer. compond with indoor grad uv resistance and pressed fitted with tubularfram. size : ( w ) 52.5cm* ( d ) 55.8cm* ( h ) 84.5cm* ( seat h ) 45.0 cmseat size 52.5cm ( w ) *53.2 cm ( d ) back size 51.6 cm ( w ) *40.5 cm ( h ) . oc c office chair mid back pneumatic height adjustment cushioned revolving chair made up of 1.2cm thick hot pressed ply wood seat & back upholstered with fabric with moulded polyurethane foam together with moulded abs seat & back integral skin polyurethane with reinforced with m.s. insert. the tilt mechanism adjustment upright locking, 360 degree revolving type fitted with 05 nos. twin wheel castor dia 5 cm. comr compactor on 12 feet rail length moves on rails. the cabinet body rigid knock down construction made of 0.8 thick crca steel eonforming to is: 513 gld. body units are bolted to undercarriage. optimizer height from ground is 2081 ] mm ( 1930 hody+ 65 under 35 channel systems ] finish: — the bodies inciuding shelves are given anti rust surface treatment 8‘ are powder coated with epoxy polyester powder oven backed with a controlled temperature of 130 deg. to 200 deg. c.sheif:l made of 0.8 thick crca steel conforming to is;513 gd. max load bearing capacin is fit! kg. udl per ahett x 5:400 kg. eauh cabinet. undercarriage: the undercarriage is a welded trams made of hr sheet 3.15 mm thick conforming [ 0 is; 1d?48movement of the system: push pull configuration { type p utype f~2 } movement of units achieved pushing or putting chrome plated 0 handle fitted suitable height on one side at body. cnft conference table of 30 seater capacity shall be an eco modular conference table enables various configurations to suit different conference rooms. it is made of particle board and has wire management facilities for uncluttered wiring. it has profiled legs with twin colored modesty for better looks, double 1350.0wx 600.0dx 750.0h, work surface top thickness is 25mm plb with pvc beading allover, legs modesty wire manager made from 18mm thick plt having curved profile.made from plt ( prelaminated twin ) boards 18mm thick in two shades. a wire manager running along the width of desk fitted on the modesty panel from inside. cort corner table of size 530w x 450d x 450h built with the extremely durable rubberwood, with a very suitable cappuccino color, the table will complement any style of décor. the tapered legs provide stable support. it’s free of flaws design can accommodate your books, magazines, laptop and coffee mugs, all at once. the well thought out dimensions of the table make it easier to position it anywhere in the house. dt a ss canteen table with s.s top 8 seated with foldable stool size : l 2130 mmx d 915 mmx ht 750mm: under structure made of prime quality cold rolled close annealed square tube 30mm x 30mm x 1.2mm thick. with 8 nos. folding / tilting stools 4 on each side. stools fitted on specially designed c clamps over leg rest on each side with bush for smooth functioning. top 1.0mm thick, stainless steel properly bent & edge formed, supported with 12mm ply / plpb below the top. the stool top is made up of 1.0mm thick. stainless steel dia 30mm, supported on 12mm ply / plpb fitted with csk screw on 25mm x 3mm thick. ms flat welded on stool frame. all steel components are epoxy powder coated followed by seven tanks of anti corrosion treatment of the surface. fct file cabinet with 4 drawer width: 470mm, height: 1320mm, depth: 620mm , rigid knockdown construction, material: top, side & drawer frontmade from0.7mm thk **crca, drawer inside cover, side back side made from0.6mmthk **crca, back, bottom, drawer bottommade from 0.5mmthk **crca, **crcasteel confirming to is 513, grade d, label holder snap on type plastic label holder on drawer fronts, locking & anti tipping arrangement centralized lockingwith camlock& having antitipping arrangement to ensure that when one , drawer is opened for use, it does not allow other drawers to be opened, finish epoxy polyester powder coated to the thickness of 50 microns ( + / 10 ) . fp cbnt fire proof cabinet shall be designed to protect the contents ( paper media documents ) against the fire hazard.shell: the external shell of the cabinet shall be of steel of minimum 2 mm thick and internal shell of steel of 1.6 mm thick, both conforming to is 513. further fortified by suitable in situ insulating fire resistant barriers to meet the required protection. the overall protection to the contents shall be minimum 70 mm on all six sides. door: the external door of the cabinet shall be of steel of minimum 2 mm thick conforming is 513 and further fortified with hard plate over the lock for burglary protection and in situ insulating fire resistant barrier material to meet required fire protection.  bolt work: the door shall be secured by four way locking mechanism / bolt work with minimum 8 moving shooting bolts of 20 mm diameter. door & body fitment: the door fits in the cabinet having tongue and groove construction that stops hot gases and high temperature to pass through and withstand temperature up to 1010 deg.c. locking: the frrc shall be equipped with a dual control high precision key lock of minimum six levers. the lock body shall be of zinc alloy and the levers in the lock shall be of brass conforming to is 410. there shall not be any dummy lever in the lock. the storage capacity shall be minimum 650 liters with minimum usable internal sizes in mm as 1620 ( h ) x 670 ( w ) x 599 ( d ) .the cabinet shall be provided with minimum four nos. adjustable shelves. oc d office chair with seat / back assembly: the cushioned seat assembly consists of seat base moulded in glass filled poly amide, moulded polyurethane foam & upholstered with high stretch knitted polyester fabric. the cushioned back assembly consists of back inner moulded in polypropylene in situ moulded with polyurethane foam & upholstered with high stretch knitted polyester fabric. back size : 45.5 cm. ( / 1 / ) x 53.0 cm. ( h ) seat size : 48.5 cm. ( w ) x 49.0 cm. ( d ) high resilience ( hr ) polyurethane foam: the hr polyurethane foam used in seat and back cushion is moulded in density min 48 kg / m3, and hardness load 15 ± 2 kgf as per is:7888 for 25% compression. tilt mechanism, spines & spine connector: the seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. the cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. the s shaped spines moulded in high strength glass filled poly amide and the spine connector moulded in glass filled poly amide form the back spine structure involved in multi dimensional recline motion. the variable tilt angle recline motion can be adjusted with 3 position tilt limit feature which should be inbuilt in seat base and the tension ( return force ) should be user weight dependent. adjustable armrests: the assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled poly amide: the height adjustment feature should be button operated having adjustment of 6.6±0.5cm. the armrest top should be made up of integral skin pu moulded over plastic inner moulded in glass filled poly amide. pneumatic height adjustment: the seating height can be adjusted with a pneumatic gas lift having an adjustment stroke of 9.2 ± 0.3 cm pedestal assembly: the pedestal should be injection moulded in glass filled poly amide and fitted with 5 nos. twin wheel castors. the pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors twin wheel castors :5 nos. twin wheel castos are injection moulded in poly amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal. ht hod table of size 1500 x 750 x 743 understructure: the understructure is in prelam panels, made with plt boards.drawer storage units with different combinations to support tops, made with 18mmplt boards of different colours. modesty and back panels, made with 18mm plt boards. the pedestals / storages are fitted with necessary locks plt board tops ( straight edges ) : wenge and savannah maple plt board used for making tops. pvc membrane tops ( with profiles ) : jdb job display board with dimensions ( 1200x900x150 ) mm board having 9 mm ply tdb tool display board ( 1200x900x150 ) mm board having 9 mm ply lt chem chemistry lab table of size 4130mm x 1540mm x 900mm with pp drop sink of size 560 x 355, single tap deck mounted 8 swing goose neck, ss peg board 550x420x55 with 25 pegs. two reagent shelves of width 1050 with glass shelf. c frames all cframes assemblies should be manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 ( indian standard specification for steel tubes for furniture ) and all sheet metal components should be of crca confirming to is code 513:1994. the suspended under bench welded units should be supported on heavy duty steel frames fully carrying the load of worktops. c frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. the c frame shall also have skirting at back bottom side. horizontal members should be made from rectangular pipes of 2mm thickness. lt n lab table of size 4130mm x 1540mm x 900mm frames all cframes assemblies should be manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 ( indian standard specification for steel tubes for furniture ) and all sheet metal components should be of crca confirming to is code 513:1994. the suspended under bench welded units should be supported on heavy duty steel frames fully carrying the load of worktops. c frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. the c frame shall also have skirting at back bottom side. horizontal members should be made from rectangular pipes of 2mm thickness. cross sectional dimensions of the pipe should be 60 x 30 x 2 mm. lu 4d locker unit with 4 door plu + lkr ( base ) with stand size 1830hx380wx450d, stackibilit the add on units can be stacked width wise to formbank of lockers having common side panel, locking cam lock with lock leveroption of hasp arrangement, material crca 0.6mmthickness, rigid knockdown construction, shelf uniformly distributed load capacity per each shelf level is 35 kg maximum, hat self 4 door model at the top, finish epoxy polyester powder coated to the thickness of 50 microns ( + / 10 ) .ventilation attractive punched pattern for ventilation lt b long table of size 1800 x 900 x 740 worktop 25 mm thick plb tops with 2mm thick pvc edge beading understructure c – frames legs 1.6 mm thick m.s c­frame supporting the top. legs dia. 38.1 x 1.6 mm thick m.s erw tube. dt b meeting table with 10 seater with wire manager of size 2400w * 1200d * 750h h top all tops are made from 25mm thick pre—laminated board with 2mm thick. pvc edge beading side panel all side panels are made from 25mm thick pre—laminated twin with 2mm thick pvc lipping of same color on sides and 0.8mm pvc lipping of matching color on the bottom curve, modesty these panels are made from 18mm thick pre laminated board with 0.8mm pvc lipping of matching color, access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical / data voice. sockets from top, powder coated switch mounting tray made from 0.8mm and 1.2mm m.s sheet. switches to be mounted on tray as per requirement. provision for mounting 8 — module anchor roma switch plate on switch mounting tray. wire manager rehau made from rau pvc 1309 / 7558 ( black color ) nb notice board with size 4 x 3 surface material woolen felt / fabric in various colours, core material 9 mm thick soft board, backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour or 0.16 to 0.25 mm thick isi mark gp sheet, aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness rt da reception table double arch with dl top of size 2410 x 1065 x 725 worksurface, 1035 counter, d l top top clean matt pu finish 18mm thick inside radius 700.0 mm outside radius – 1350.0 mm depth – 650 mm glass frosted glass 10mm thick diamond cut finishing on edges inside radius – 1202.5mm outside radius – 1402.5mm depth – 200mm, modesty panel ms perforated sheet below worksurface : 0.8 mm ( thick ) x 665.0 mm ( height ) x 1345.0 mm ( flat length ) above worksurface : 0.8mm ( thick ) x 260 mm ( height ) x 1345.0 mm ( flat length ) , legs ms tube 1.6 mm thick diameter 50.8 mm height 604 mm. wb s non magnetic small white board 4 x 3 surface material 0.62 to 0.72 mm thick laminate sheet with extra melamine surface, core material 8 mm thick particle board, backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour, aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness. s al steel almirah of size 1981 x 916 x 486 mm multi bend construction and inter locking design and full length over apping doors and sides. three way bolting mechanism. spot welding & co2 welding. anticorrosion treated components, oven baked powder coating process. material thickness 0.9mm.top, bottom, lh & rh sides and back material thickness= 0.9mm, removable rh & lh main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm sr a steel rack of size 6x36x18 with six shelves prime quality crc sheet conforming to is 513d / 10748 / 5986. the pitches of the slots at 19.05 mm, panel / shelves: 6 bnd bending process of 905l x 448d of load capacity 80 kgs. udl max per shelf. shelf material 0.8 mm thick ms sheet conforming to commercial quality cr 1, grade 340 of is 513, angle posts material and size rolled steel angle posts of 40 x 40 x 1.8 mm, m s sheet thickness of shelves and back ( minimum ) in mm 0.8, paint powder coated with lead free paint. ls lab stool of circular type 30.0 + / 0.5 cm and made up of 0.1+ / 0.012 cm thk cr steel. it is welded to the understructure and black powder coated ( dft 40 60 microns ) . understructure assembly: the understructure is made of ms tube 2.2 + / 0.03 cm x 0.16+ / 0.0128 cm thk ms erw tube. lt is welded ti the ms fabricated circular seat assembly and black powder coated ( dft 40 60 microns ) . the understructure is provided with black pp injection moulded ferrules. sr b steel rack of size 2 6x36x18 with three shelves prime quality crc sheet conforming to is 513d / 10748 / 5986. the pitches of the slots at 19.05 mm, panel / shelves: 6 bnd bending process of 905l x 448d of load capacity 80 kgs. udl max per shelf. shelf material 0.8 mm thick ms sheet conforming to commercial quality cr 1, grade 340 of is 513, angle posts material and size rolled steel angle posts of 40 x 40 x 1.8 mm, m s sheet thickness of shelves and back ( minimum ) in mm 0.8, paint powder coated with lead free paint. ot a office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side three drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock. ct computer table of size 600w x 450d x 750h mm compact and easy to use . top made up of 1.5 cm medium density fiber. all the other panels are made of particle board. vacuum lamination of pvc has been done on the table to surface. 0.4mm lapping is used for all the other panels ot b office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18 mm thick pre laminated top size 1365 x 680 x 735 ( approx. ) with both side drawer unit one side three drawers & another side two drawers made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with both side drawer lock pt principal table main desk of size 1800 x 900 x 740, eru of size 1550 x 450 x 705 made up of top 25 mm thick plain particle board ( ppb ) clad with 0.6mm thick post formed laminate and 1mm thick backing laminate ( bdl ) . flat edge duly sealed with 2mm thick pvc beading., modesty 18mm thick plain particle board ( ppb ) clad with 1.0mm thick decorative laminate ( dl ) on both sides. edge sealed with 2mm thick pvc beading with 01 no. 3 drawers free standing pedestal. ot c office table with eru & pedestal of size 1350 x 750 x 750 mm + eru + pedestel main desk of size 1350 x 750 x 750 with eru of size 1200 x 450 x 750 & 01 no. 3 drawers pedestal: top panel made from 25 ±0.5 mm thk pre laminated boards as per is 12823 with 2 mm thick pvc beading on all sides. side panel the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm pvc beading on all sides. modestty 1 & 2 the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm thick pvc beading on all edges. the panel is made from 25 ±0.5 mm thk pre laminated boards as per is 12823 with 2 mm thick pvc beading on all sides, the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm pvc beading on all sides. the panel is made from 18 ±0, 5 mm thk pre laminated boards as per is 12823 with 0.8 mm thick pvc beading on all edges. pedestal wooden panel ( 1 box+ 1 filling ) back wooden panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with pvc beading on all sides. the panel is made from 9 ±0.5 mm thk pre laminated board. sstp steel table with stainless steel top of size 1180 x 750 x 750. worktop the top is in stainless steel brushed finish with plb insert for durability. easy to clean and maintain hygiene. side frames made from 30mm x 30mm x 1.5mm thick m.s powder coated tubes at base which are welded and are fixed to top with screws. the bottom ends are closed with plastic buffers. ms shade : s / g metallic dark grey ( nerocoat 9000626 ) , cross member made from 30mm x 30mm x 1.5mm thick m.s powder coated tube, which is welded and bolted to side frames. tp a teaching platform with the dimensions of length 6 ft x breadth 4 ft x height 1.5 ft with 19 mm plywood on top, shall be rectangular hallow box shape without legs. tp b teaching platform with the dimensions of length 12 ft x breadth 6 ft x height 1.5 ft with 19 mm plywood on top, shall be rectangular hallow box shape without legs. pod wooden podium with dimensions: 45 h x 20 w x 15 d to 50 h x 25 w x 20 d presenter side height: 40 to 45 shelves: 20 h x 20 w x 10 d to 25 h x 25 w x 12 d product weight: 50 to 55 lbs. shipping weight: 65 to 70 lbs. material: scratch resistant high pressure laminate. the top of the table shall be provided 19 mm ost. the table shall be neatly finished and polished. smchr seminar chair with understructures could be revolving or fixed type as per need. option of hinge type and retractable desk let. desklet 100% voc free powder coating knock down design reducing transportation emissions designed for long life ot e office table of size 900 x 590 x 750 made of ms erw square tube 18 mm x 25mm x 1.2mm thick with pre laminated top size 1199 x 590 x 750 mm thick with single side one drawers, drawer unit made of .5mm thick ms crca sheet, all steel components have powder coated paint wb l non magnetic long white board 8 x 4 size and surface material 0.62 to 0.72 mm thick laminate sheet with extra melamine surface, core material 8 mm thick particle board, backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour, aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness. bkrk a double sided book rack with the dimensions width 900mm, height: 1850mm, depth: 600mm, rigid knockdown construction. construction, material crca0.8mmthickness, finish epoxypolyester powder coated to the thickness of 50 microns ( + / 10 ) .number of adjustable shelf: five adjustable shelves on one side ( total 12 loading levels ) . uniformlydistributed load capacity per each shelf is 80 kgmaximum. label holder & range indicator label holder & range indicator on eachmain unit for inserting labels. bkrk b single sided book rack with the dimensions width 900mm, height: 1850mm, depth: 316mm, rigid knockdown construction, material crca 0.8 mm thickness, finish: epoxypolyester powder coated to the thickness of 50 microns ( + / 10 ) ., number of adjustable shelf five adjustable shelves. ( total 6 loading levels ) . uniformlydistributed load capacity per each shelf is 80 kg maximum, label holder & range indicator label holder & range indicator on eachmain unit for inserting labels. m r magazine rack with overall dimensions of all steel periodical display rack shall be 900mm ( w ) x450mm ( d ) x1830mm ( h ) . rigid knockdown construction , panels shall be made from crca 0.6 mm thick and front frame shall be made from crca 0.8 mm thick . crca d grade as per is 513 . there shall be 5 level racks , display tray shall be suitable for fullscape size magazines, periodicals, aesthetically appealing metal tray at an angle for easy viewing . receding facility to access the storage behind . sliding on plastic rollers . behind storage shelving each of 5 level has a behind storage shelf . uniformly distributed load capacity per each shelf is 40 kg . leveler shall be screw type with hex plastic base and finish shall be epoxy polyester powder coated to the thickness of 50 microns. glsd almirah with glass door size 916mm ( w ) x 486mm ( d ) x 1980mm # ( h ) # excluding leveler, construction & material • welded construction, • 0.7mm thk ( ±0.07mm ) crca* for shelf, • 0.8mm thk ( ±0.08mm ) high yield strength crca** for doors and back, • 0.9mm thk ( ±0.08mm ) crca* for all other components, crca ‘d’ grade as per is:513, crca ‘d’ grade high yield strength as per is:513, locking & handle • brass handle with • two way locking mechanism with shooting bolt, shelves • height wise adjustable shelf mounting • uniformly distributed load capacity per each full shelf is 40 kg maximum, • 4nos. of adjustable full shelf, • box file a4 size ( 85wx345hx285d ) can be stored vertically on three shelves and the clear space above fourth shelf is 240mm, • m10 screw type leveler with hex plastic base, finish • epoxy powder coated to the thickness of 50 microns ( + 10 ) . dd dual desk is specially designed for rugged use with overall dimentions of l1054 x w980 x h760 mm and all edges are fillet. the desk is made of pressed formed ms crca section & crca tube fitted with pre laminated particle board top, seat & back with injection molded ppcp edge. hanger for water bottle and bag. space for keeping pen, pencil and scale. the overall appearance of the product shall be as per photograph. top injection molded ppcp edge. size : 1054x450x18 mm thk. particle board. seat injection molded ppcp edge. seat height : 450 mm , seat size : 1054x304x18 mm thk. particle board. back injection molded ppcp edge. back size : 1054x154x18 mm thk. particle board. shelf shelf 0.8 mm thk. crca sheet. bullnose front edge with stiffner 1 mm thk crca. modesty modesty 0.8 mm thk. crca sheet. slot perforated. tie members horizontal tie members 25x25x1.2 mm thk. crca pipe. footrest footrest pressed formed crca section 1.5 mm thk. side frame side frame c section pressed formed 1 mm thk.crca sheet welded with 25x50x1.2 mm thk tube. and back rest pipe ø25 x 1.2 mm thk. top end rounded. cap & levellers all pipe caps are curved ppcp material. finish all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. drs t dressing table of size 460w x 486d x 1710h mm , mirror w x h: 362 mm x 1156 mm dressing table comes with a long mirror, two storage drawers, and a stool. available in wenge color, the dresser is crafted from good quality mdf wood, making it sturdy and lasting. the shelves of this stylish dressing table can be used to keep items like perfume bottles, hair products, and medicines, for that clutter free look. the stool, also wenge color with an orange colored cushion, offers comfortable seating, while the full length mirror is perfect to dress up, and check your overall ensemble. s al m steel almirah with mirror of size 900w x 507d x 1950h mm rafted from prime steel, your slimline cupboard will be resistant to corrosion and peststhis cupboard comes with 2 easily adjustable shelvesthe hanging rod inside the cupboard ensures ample space for your daily wear, suits, sarees and / or dressesknock down construction makes shifting and handling of slimline easieravailable with over head unit option to maximize vertical space usage you can also choose to have a mirror with slimlinestylish snap shut flush handle enhances slimline’s aesthetics. audi c auditorium chair seat / back assembly: the seat and back are made up of 1.2±0.1 cm. thick hot pressed plywood measured as per qa method described in ocp qlta p14 18 and upholstered with fabric and moulded polyurethane foam. the back is, flexing type.back size 47.0 cm. ( w ) x 51.0 cm. ( h ) , seat size 47.0 cm. ( w ) x 47.0 cm. ( d ) . 2. high resilience ( hr ) polyurethane foam: the hr polyurethane foam is moulded with density = 45±2 kg / m3 and hardness load 16 ± 2 kgf as per is:7888 for 25% compression.3. armrests :the one piece armrests are made of black integral skin polyurethane foam with 50 70 shore hardness and reinforced with m.s. insert. the armrests are scratch and weather resistant.5. understructure assembly: it is made of dia. 2.54±0.03cm. x 0.2±0.016cm. thk. m.s.e.r.w. tube with connecting strips made of 0.5 ± 0.05 cm. thk. hr steel welded to it for holding the seat. the assembly is powder coated ( dft 40 60 microns ) .the auditorium chair is designed to get mounted / grouted on floors with flooring specification as per engineer in charge.overall width 57.0, depth 57.0, height 86.0, seat height 44.0 cm. ss mc movable chair made out of stainless steel, understructure seat and back are made up of injection moulded high impact strength polypropylene polymer compound with indoor grade uv resistance *seat size: 52.5 cm. ( w ) x 53.2 cm. ( d ) , * back size : 51.6 cm. ( w ) x 40.5 cm. ( h ) .s.s. understructure: the tubular welded frame is made from dia 2.22 ± 0.03 cm x o.12 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.12 ± 0.0128 cm stainless steel 202 grade tube. the tubes are buff polished to give shiny finish. bd hostel bed made out of steel with overall size length 1994mm, width 907mm, height 822 / 623 / rest height 450mm, structure of metal bed frame including legs and head structure mild steel pipe, head board shape of headboard semi circular, thickness of hollow section in structure ( 1.2mm ) , support panel for placement of mattresses mild steel hollow box rectangular section, thickness of support panel ( in 1.2mm ) , material of head board mild steel erw tube is:7138 square tube of 38.1 mm x 1.2 mm thick, material of mattress panel ms perforated / sheet, thickness of mattress panel 1.2 ( mm ) , size of support members in mm ( ±5 mm ) 50 x 50mm, number of support members is 04 nos., paint / finish of all m s parts powder coating 60 micron. oc a office chair with seat and back are made from seasoned wood and plywood. the same is upholstered with black synthetic leather and polyurethane foam. back size 46.0cm ( w ) x27.0cm ( h ) . seat size 46.0cm ( w ) x40.0cm ( h ) . the armrest is gas assisted injection moulded from black polypropylene. the understructure assembly is a cantilever type frame.width of the chair 58cm, depth 56.5cm, height 87.5cm, seat height 48cm. sc study chair is made of blow molded high density polyethylene andis fixed on the understructure assembly with the help of stainless steel pop rivets.seat: seat is made of blow molded high density polyethylene and is fixed on the understructure assembly.understructure all side metal frames and cross connectors are made from mild steel erw tubes , 40 x 20 x 2mm thk ( approx. 14 swg ) as per 1s:7138 which are welded togetherthe welded structures and cross connectors are coated with min 45 micron thickness of epoxy polyester coating. bag storage tray made of 04 mild steel rod ( as per 15:432 ) forms a cage at the bottom and is welded to the main understructure. seat support channel made of 1mm thk mild steel sheet ( as per is:513 ) is welded to the understructure for fixing seat. plastic caps plastic caps made of polypropylene are provided on the foot rest side tubes and back leg tubes adding more aestheic value to the product. st study table with all sides metal frames and cross connectors are made from mild steel erw tubes , 40 x 20 x 2mm thk ( approx. 14 swg ) as per 15:7138 which are welded together.the welded structures and cross connectors are coated with min 45 micron thickness of epoxy polyester coating. shelf tray and desktop mounting brackets made of 2mm thk mild steel sheet ( as per 15:513 ) are welded to the understructure for fixing shelf tray and desktop respectively. hooks are provided ori the vertical side frames on both sides of the desk for hanging bags / bottles. they are made from 09 mild steel rod ( as per 15:432 ) and are welded to the main understructure plastic caps: plastic caps made of polypropylene are provided on the foot rest side tubes and front leg tubes adding more aestheic value to the product....

North Eastern Railways - Bihar

30436756 supply of dwc pipedwc pipe,supply of dwc pipes of hdpe confirming to is 14930 part 2 of size 90/76mm(od/id) with coupler , the hdpe pipe shall be rodent proof and fire resistant....

Kanti Bijlee Utpadan Nigam Limited - Bihar

30200001 procurement of fire resistant fluid for lp bypass system of stage ii procurement of fire resistant fluid for lp bypass system of stage ii2x195 mw at kbunl kanti. , fire res fluid:fyrqual ehc...

Ministry Of Power - Bihar

29579656 bids are invited for v belts endless v belts for industrial purposes fire resistant and antistatic v belts is:2494mse total quantity : 180...

Building Construction Department - Bihar

29363920 supply and installation work of furniture and other items in engineering college district. nawada 2021 22 1 ot d office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side one drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock. 2 2ss 2 seater sofa overall size 1130w x 700d x 785 h cm, seat height 43.5 cm side frame assembly: the side frame assembly is fitted to the two ends of the connecting beam assembly to form, the leg cum armrest assembly. it is made of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick ms e.r.w. tube and powder coated ( dft 40 60 microns ). the ends are fitted with abs moulded end caps, 3. seatrest assembly:the seat rest assembly consists of a fabricated inner frame assembly insitu moulded high resilience (hr) polyurethane foam having density = 45 +/ 2 kg/m3 with hardness load 25 ± 2 kgf as per is:7888 for 25% compression of the foam. the complete moulded seat rest assembly is covered with a replaceable fabric upholstery cover *seat size: 52.0cm. (w) x 50.0cm. (d) x 6.0cm. (t), 4. backrest assembly:the backrest assembly is flexing type and consists of a fabricated inner frame assembly insitu moulded with high resilience (hr) polyurethane foam having density = 45 +1 2 kg/m3 with hardness load 14 ± 2 kgf as per is:7888 for 25% compression of the foam. the complete moulded backrest assembly is covered with a replaceable fabric upholstery cover. *back size: 52.0cm. (w) x 59.0cm. (h) x 6.0cm. (t), 5. adj. glides: the adj glide is injection moulded in black nylon & fitted to the front end of side frame assembly along with abs moulded adj. glide base to take care or unleveled floor surface 3 3ss 3 seater sofa the side frame assembly made of 38mm dia 2mm thick is fitted to the two ends of the connecting beam assembly to form the leg cum armrest assembly. it is made of a ms. e.r.w. tube duly powder coated. the ends are fitted with abs moulded end caps. tie member: it is the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members are used to connect the side frames. the tie member is made of ms. e.r.w. tube 40mmx40mm 2mm thick duly powder coated. the seat/back assemblies are mounted on the tie member. l bracket of 6mm thick steel connects the back to the tie member assembly. seat foam is of 45 +/ 5 kg/m3 and back foam is of 32 +/ 5 kg/m3 with hardness of 25+/ 2 on hampden m/c. at 25% compression of the foam. seat size 52cm widex50cm deep and back size 52 cm wide and 60cm high. back of the sofa flexes for additional comfort 1 seater –601mmwx700mmdx 810mmh, 3 seater –1640w x 700d x 785 h cm 4 3s wc 3 seater steel chair cross beammade of ms erw rectangular black powder coated tube of 80 x 40 x 2 mm leg & arm rest chrome plated made of cold rolled steel. arm rest & leg assembled to the cross beam with m10 x 100 mm bolts. seat & back 1.6mm thick powdercoated perforated shell of cold rolled ms sheet. side bar of chrome plated solid steel 30 x 12 mm (din 174) with flunting & plastic insert .the shell is assembled on the cross beam with help of m8 bolts the overall dimension is 1608mm (l) x 695mm (h) x 555mm (d), seat height : 405mm 5 wb a work bench of size 4’ x 3’, angle 1.5 x 1.5 with 2 pair of legs with work top with overall dimensions. 1200mm l x 900mm d x 950mm h, the worktop of mdf ext garde is12406 wood. max udl 1500kgs the worktop should be made of various layers of beech wood which are planed, glued and pressed together. this should make the work top non deformable, and load and wear resistant. this shall be covered with 4mm steel sheet. leg: the bench leg should be powder coated should be 80mm l x 1265mm d x 960mm h. back bracing for stability 6 cnt centre table of size 1200w x 600d x 378h built with the extremely durable rubberwood, the table can hold weight up to 25kgs. with a very suitable cappuccino color, the table will complement any style of décor. the tapered legs provide stable support. it’s free of flaws design can accommodate your books, magazines, laptop and coffee mugs, all at once. the well thought out dimensions of the table make it easier to position it anywhere in the house 7 wb b work bench of size 8’ x 4’ with 2 pair of legs with work top with overall dimensions. 2400mm l x 1200mm d x 950mm h, the worktop of mdf ext garde is12406 wood. max udl 1500kgs made of various layers of beech wood which are planed, glued and pressed together. this should make the work top non deformable, and load and wear resistant. bench leg: the bench leg should be powder coated should be 80mm l x 1265mm d x 960mm h. back bracing for stability 8 ec cu executive chair with cushioned seat is made of injection molded plastic outer & inner. plastic inner is upholstered with stitched cover and moulded high resilience polyurethane foam of density 4542 kg/m*,and hardness load 16 + 2 kgf as per 15:7888 for 25% compression.the stitched cover is made from spacer fabric and leatherette seat size : 47.0 cm. (w) x 48.0 cm. (d), tunular frame : the powder coated (dft 40 60 micron) tubular frame is cantilever type & made of 02.5440.03 cm x 0.240.016 cm thk ms erw tube.the back connected to frame through powder coated (dft 40 60 micron) high pressure die cast connector. 9 oc a office chair with seat and back are made from seasoned wood and plywood. the same is upholstered with black synthetic leather and polyurethane foam. back size 46.0cm(w)x27.0cm(h). seat size 46.0cm(w)x40.0cm(h). the armrest is gas assisted injection moulded from black polypropylene. the understructure assembly is a cantilever type frame.width of the chair 58cm, depth 56.5cm,height 87.5cm,seat height 48cm. 10 oc b office chair : the seat and back are made up of 1.2 ±0.1cm. thick hot pressed plywood measured as per qa method described in ocp qlta p14 18 and upholstered with fabric and moulded polyurethane foam with pvc lipping all around. the back foam is designed with contoured lumbar support for extra comfort. back size 49.0 cm. (w) x 47.0 cm. (h) , seat size 49.0 cm. (w) x 44.0 cm. (id) high resilience (hr) polyurethane foam: the hr polyurethane foam is moulded with density = 45 ±2 kg/m3 and hardness load 16 ± 2 kgf as per is:7888 for 25% compression. 11 pc principal chair: the seat is made up of 1.4± 0.1 chick hot press 4 plywood upholstered with fabric and moulded polyurethane foam. it has a seat depth adjustment of 5.0±0.3 cm integrated in the seat through a sliding mechanism. seat size: 50.0cm (w)x 49.0cm(d).the back is injection moulded in glass filled polyamide which is upholstered with mesh fabric. the back consist of adjustable lumbar support made of injection moulded polypropylene having an adjustment of 6.0±0.1cm.backsize: 50.0cm(w) x68.0 cm(h).the polyurethane foam for seat is of density 55± 5kg/m3. it is made of glass filled polyamide arm structure with pu arm top and height adjustment of 7.0 ±0.5cm.the arm top has swivel and to for movements. to for movement is 6.0± 0.5cm.the inner tube of armrest is chrome plated. the mechanism is designed with the following features:• 360° revolving type.• centre tilt synchro• 3 position (including upright lock) giving option of variable tilt angle to the chair with anti shock feature. the headrest is injection moulded din glass filled polypropylene which is upholstered with foam and fabric has an adjustment of 6.0± 0.1cm & its assembled over the full back chair. the pneumatic height adjustment is chrome plated with an adjustment stroke of 9.0 ± 0.3cm.the pedestal is high pressure die cast polished aluminum and fitted with 5 nos. twin wheel castors. the pedestal is 65.0±0.5 cm p.c.d. the twin wheel castors are injection moulded in black glass filled polyamide having 6.0±0.1cm wheel diameter. the chrome plated tubular frame is made of día2.8±0.03cm x0.2±0.02 cm the m.s. round tube. the frame is fitted with plastic caps made of injection moulded glass filled polypropylene. 75(w)* 75(d)* 115 130(h)* 44.5 53.5(sh). 12 cc wa computer chair with seat and back are made uo injection moulded high impact strenght polypropylene polymer compound with indoor graade uv resistance.the tubular weled frame is made from dia2.22 +/ 0.03cmx 0.12+/ 0.0128 cm and 3.5+/ 0.03 cm x 0.12+/ 0.0128 am stainless steel 202 grade tube.the tube are buff polished to give shiny finish. cm. the shoes are made of high impact strenght polypropylene polymer. compond with indoor grad uv resistance and pressed fitted with tubularfram. size : (w)52.5cm*(d)55.8cm*(h)84.5cm*(seat h) 45.0 cmseat size 52.5cm(w)*53.2 cm(d) back size 51.6 cm(w)*40.5 cm (h). 13 oc c office chair mid back pneumatic height adjustment cushioned revolving chair made up of 1.2cm thick hot pressed ply wood seat & back upholstered with fabric with moulded polyurethane foam together with moulded abs seat & back integral skin polyurethane with reinforced with m.s. insert. the tilt mechanism adjustment upright locking, 360 degree revolving type fitted with 05 nos. twin wheel castor dia 5 cm. 14 comr compactor on 12 feet rail length moves on rails. the cabinet body rigid knock down construction made of 0.8 thick crca steel eonforming to is: 513 gld. body units are bolted to undercarriage. optimizer height from ground is 2081] mm (1930 hody+ 65 under 35 channel systems] finish: — the bodies inciuding shelves are given anti rust surface treatment 8‘ are powder coated with epoxy polyester powder oven backed with a controlled temperature of 130 deg. to 200 deg. c.sheif:l made of 0.8 thick crca steel conforming to is;513 gd. max load bearing capacin is fit! kg. udl per ahett x 5:400 kg. eauh cabinet. undercarriage: the undercarriage is a welded trams made of hr sheet 3.15 mm thick conforming [0 is; 1d?48movement of the system: push pull configuration {type p utype f~2} movement of units achieved pushing or putting chrome plated 0 handle fitted suitable height on one side at body. 15 cnft conference table of 30 seater capacity shall be an eco modular conference table enables various configurations to suit different conference rooms. it is made of particle board and has wire management facilities for uncluttered wiring. it has profiled legs with twin colored modesty for better looks, double 1350.0wx 600.0dx 750.0h, work surface top thickness is 25mm plb with pvc beading allover, legs modesty wire manager made from 18mm thick plt having curved profile.made from plt (prelaminated twin) boards 18mm thick in two shades. a wire manager running along the width of desk fitted on the modesty panel from inside. 16 cort corner table of size 530w x 450d x 450h built with the extremely durable rubberwood, with a very suitable cappuccino color, the table will complement any style of décor. the tapered legs provide stable support. it’s free of flaws design can accommodate your books, magazines, laptop and coffee mugs, all at once. the well thought out dimensions of the table make it easier to position it anywhere in the house. 17 dt a dining table of 8 seater with wire manager of size 2400w * 1200d * 750h h top all tops are made from 25mm thick pre—laminated board with 2mm thick. pvc edge beading side panel all side panels are made from 25mm thick pre—laminated twin with 2mm thick pvc lipping of same color on sides and 0.8mm pvc lipping of matching color on the bottom curve, modesty these panels are made from 18mm thick pre laminated board with 0.8mm pvc lipping of matching color, access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical/data voice. sockets from top, powder coated switch mounting tray made from 0.8mm and 1.2mm m.s sheet. switches to be mounted on tray as per requirement. provision for mounting 8 — module anchor roma switch plate on switch mounting tray. wire manager rehau made from rau pvc 1309/7558 (black color). 18 fct file cabinet with 4 drawer width: 470mm, height: 1320mm, depth: 620mm , rigid knockdown construction, material: top, side & drawer frontmade from0.7mm thk **crca, drawer inside cover, side back side made from0.6mmthk **crca, back, bottom, drawer bottommade from 0.5mmthk **crca, **crcasteel confirming to is 513, grade d, label holder snap on type plastic label holder on drawer fronts, locking & anti tipping arrangement centralized lockingwith camlock& having antitipping arrangement to ensure that when one ,drawer is opened for use, it does not allow other drawers to be opened, finish epoxy polyester powder coated to the thickness of 50 microns (+/ 10). 19 fp cbnt fire proof cabinet shall be designed to protect the contents (paper media documents) against the fire hazard.shell: the external shell of the cabinet shall be of steel of minimum 2 mm thick and internal shell of steel of 1.6 mm thick, both conforming to is 513. further fortified by suitable in situ insulating fire resistant barriers to meet the required protection. the overall protection to the contents shall be minimum 70 mm on all six sides. door: the external door of the cabinet shall be of steel of minimum 2 mm thick conforming is 513 and further fortified with hard plate over the lock for burglary protection and in situ insulating fire resistant barrier material to meet required fire protection.  bolt work: the door shall be secured by four way locking mechanism / bolt work with minimum 8 moving shooting bolts of 20 mm diameter. door & body fitment: the door fits in the cabinet having tongue and groove construction that stops hot gases and high temperature to pass through and withstand temperature up to 1010 deg.c. locking: the frrc shall be equipped with a dual control high precision key lock of minimum six levers. the lock body shall be of zinc alloy and the levers in the lock shall be of brass conforming to is 410. there shall not be any dummy lever in the lock. the storage capacity shall be minimum 650 liters with minimum usable internal sizes in mm as 1620 (h) x 670 (w) x 599 (d).the cabinet shall be provided with minimum four nos. adjustable shelves. 20 oc d office chair with seat/back assembly: the cushioned seat assembly consists of seat base moulded in glass filled poly amide, moulded polyurethane foam & upholstered with high stretch knitted polyester fabric. the cushioned back assembly consists of back inner moulded in polypropylene in situ moulded with polyurethane foam & upholstered with high stretch knitted polyester fabric. back size : 45.5 cm. (/1/) x 53.0 cm. (h) seat size : 48.5 cm. (w) x 49.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam used in seat and back cushion is moulded in density min 48 kg/m3, and hardness load 15 ± 2 kgf as per is:7888 for 25% compression. tilt mechanism, spines & spine connector: the seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. the cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. the s shaped spines moulded in high strength glass filled poly amide and the spine connector moulded in glass filled poly amide form the back spine structure involved in multi dimensional recline motion. the variable tilt angle recline motion can be adjusted with 3 position tilt limit feature which should be inbuilt in seat base and the tension (return force) should be user weight dependent. adjustable armrests: the assembly consists of armrest housing sliding over the armrest structure, both moulded in glass filled poly amide: the height adjustment feature should be button operated having adjustment of 6.6±0.5cm. the armrest top should be made up of integral skin pu moulded over plastic inner moulded in glass filled poly amide. pneumatic height adjustment: the seating height can be adjusted with a pneumatic gas lift having an adjustment stroke of 9.2 ± 0.3 cm pedestal assembly: the pedestal should be injection moulded in glass filled poly amide and fitted with 5 nos. twin wheel castors. the pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors twin wheel castors :5 nos. twin wheel castos are injection moulded in poly amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal. 21 ht hod table of size 1500 x 750 x 743 understructure: the understructure is in prelam panels, made with plt boards.drawer storage units with different combinations to support tops, made with 18mmplt boards of different colours. modesty and back panels, made with 18mm plt boards. the pedestals/storages are fitted with necessary locks plt board tops (straight edges): wenge and savannah maple plt board used for making tops. pvc membrane tops (with profiles): 22 jdb job display board with dimensions (1200x900x150)mm board having 9 mm ply 23 tdb tool display board (1200x900x150)mm board having 9 mm ply 24 lt chem chemistry lab table of size 4130mm x 1540mm x 900mm with pp drop sink of size 560 x 355, single tap deck mounted 8 swing goose neck, ss peg board 550x420x55 with 25 pegs. two reagent shelves of width 1050 with glass shelf. c frames all cframes assemblies should be manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 (indian standard specification for steel tubes for furniture) and all sheet metal components should be of crca confirming to is code 513:1994. the suspended under bench welded units should be supported on heavy duty steel frames fully carrying the load of worktops. c frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. the c frame shall also have skirting at back bottom side. horizontal members should be made from rectangular pipes of 2mm thickness. 25 lt n lab table of size 4130mm x 1540mm x 900mm frames all cframes assemblies should be manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 (indian standard specification for steel tubes for furniture) and all sheet metal components should be of crca confirming to is code 513:1994. the suspended under bench welded units should be supported on heavy duty steel frames fully carrying the load of worktops. c frame should be constructed from a rectangular pipe with a cross section of 60mm x 30mm and should be 2 mm thick and should be without a vertical front leg to give a clean look. the c frame shall also have skirting at back bottom side. horizontal members should be made from rectangular pipes of 2mm thickness. cross sectional dimensions of the pipe should be 60 x 30 x 2 mm. 26 lu 4d locker unit with 4 door plu + lkr (base) with stand size 1830hx380wx450d, stackibilit the add on units can be stacked width wise to formbank of lockers having common side panel, locking cam lock with lock leveroption of hasp arrangement, material crca 0.6mmthickness, rigid knockdown construction, shelf uniformly distributed load capacity per each shelf level is 35 kg maximum, hat self 4 door model at the top, finish epoxy polyester powder coated to the thickness of 50 microns (+/ 10).ventilation attractive punched pattern for ventilation 27 lt b long table of size 1800 x 900 x 740 worktop 25 mm thick plb tops with 2mm thick pvc edge beading understructure c – frames legs 1.6 mm thick m.s c­frame supporting the top. legs dia. 38.1 x 1.6 mm thick m.s erw tube. 28 dt b meeting table with 10 seater with wire manager of size 2400w * 1200d * 750h h top all tops are made from 25mm thick pre—laminated board with 2mm thick. pvc edge beading side panel all side panels are made from 25mm thick pre—laminated twin with 2mm thick pvc lipping of same color on sides and 0.8mm pvc lipping of matching color on the bottom curve, modesty these panels are made from 18mm thick pre laminated board with 0.8mm pvc lipping of matching color, access flap and switch mounting tray made from matt silver anodized aluminium extrusion and plastic moulded components to facilitate access of electrical/data voice. sockets from top, powder coated switch mounting tray made from 0.8mm and 1.2mm m.s sheet. switches to be mounted on tray as per requirement. provision for mounting 8 — module anchor roma switch plate on switch mounting tray. wire manager rehau made from rau pvc 1309/7558 (black color) 29 nb notice board with size 4 x 3 surface material woolen felt / fabric in various colours,core material 9 mm thick soft board,backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour or 0.16 to 0.25 mm thick isi mark gp sheet,aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness 30 rt da reception table double arch with dl top of size 2410 x 1065 x 725 worksurface, 1035 counter, d l top top clean matt pu finish 18mm thick inside radius 700.0 mm outside radius – 1350.0 mm depth – 650 mm glass frosted glass 10mm thick diamond cut finishing on edges inside radius – 1202.5mm outside radius – 1402.5mm depth – 200mm, modesty panel ms perforated sheet below worksurface : 0.8 mm (thick) x 665.0 mm (height) x 1345.0 mm (flat length) above worksurface : 0.8mm (thick) x 260 mm (height) x 1345.0 mm (flat length), legs ms tube 1.6 mm thick diameter 50.8 mm height 604 mm. 31 wb s non magnetic small white board 4 x 3 surface material 0.62 to 0.72 mm thick laminate sheet with extra melamine surface,core material 8 mm thick particle board,backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour,aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness. 32 s al steel almirah of size 1981 x 916 x 486 mm multi bend construction and inter locking design and full length over apping doors and sides. three way bolting mechanism. spot welding & co2 welding. anticorrosion treated components, oven baked powder coating process. material thickness 0.9mm.top, bottom,lh & rh sides and back material thickness= 0.9mm,removable rh & lh main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm 33 sr a steel rack of size 6x36x18 with six shelves prime quality crc sheet conforming to is 513d/10748/5986. the pitches of the slots at 19.05 mm, panel/shelves: 6 bnd bending process of 905l x 448d of load capacity 80 kgs. udl max per shelf. shelf material 0.8 mm thick ms sheet conforming to commercial quality cr 1, grade 340 of is 513, angle posts material and size rolled steel angle posts of 40 x 40 x 1.8 mm, m s sheet thickness of shelves and back (minimum) in mm 0.8, paint powder coated with lead free paint. 34 ls lab stool of circular type 30.0 +/ 0.5 cm and made up of 0.1+/ 0.012 cm thk cr steel. it is welded to the understructure and black powder coated ( dft 40 60 microns ). understructure assembly: the understructure is made of ms tube 2.2 +/ 0.03 cm x 0.16+/ 0.0128 cm thk ms erw tube. lt is welded ti the ms fabricated circular seat assembly and black powder coated ( dft 40 60 microns ). the understructure is provided with black pp injection moulded ferrules. 35 sr b steel rack of size 2 6x36x18 with three shelves prime quality crc sheet conforming to is 513d/10748/5986. the pitches of the slots at 19.05 mm, panel/shelves: 6 bnd bending process of 905l x 448d of load capacity 80 kgs. udl max per shelf. shelf material 0.8 mm thick ms sheet conforming to commercial quality cr 1, grade 340 of is 513, angle posts material and size rolled steel angle posts of 40 x 40 x 1.8 mm, m s sheet thickness of shelves and back (minimum) in mm 0.8, paint powder coated with lead free paint. 36 ot a office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18mm thick pre laminated top size 1199 x 590 x 735 mm with one side three drawer unit made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with lock. 37 ct computer table of size 600w x 450d x 750h mm compact and easy to use . top made up of 1.5 cm medium density fiber. all the other panels are made of particle board. vacuum lamination of pvc has been done on the table to surface. 0.4mm lapping is used for all the other panels 38 ot b office table made of ms erw round tube dia 25.4 x 1.2mm thick with 18 mm thick pre laminated top size 1365 x 680 x 735 (approx.) with both side drawer unit one side three drawers & another side two drawers made of .5mm thick crca sheet mild steel, all steel components have powder coated paint fitted with both side drawer lock 39 pt principal table main desk of size 1800 x 900 x 740, eru of size 1550 x 450 x 705 made up of top 25 mm thick plain particle board (ppb) clad with 0.6mm thick post formed laminate and 1mm thick backing laminate (bdl). flat edge duly sealed with 2mm thick pvc beading., modesty 18mm thick plain particle board (ppb) clad with 1.0mm thick decorative laminate (dl) on both sides. edge sealed with 2mm thick pvc beading with 01 no. 3 drawers free standing pedestal. 40 ot c office table with eru & pedestal of size 1350 x 750 x 750 mm + eru + pedestel main desk of size 1350 x 750 x 750 with eru of size 1200 x 450 x 750 & 01 no. 3 drawers pedestal: top panel made from 25 ±0.5 mm thk pre laminated boards as per is 12823 with 2 mm thick pvc beading on all sides. side panel the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm pvc beading on all sides. modestty 1 & 2 the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm thick pvc beading on all edges. the panel is made from 25 ±0.5 mm thk pre laminated boards as per is 12823 with 2 mm thick pvc beading on all sides, the panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with 0.8 mm pvc beading on all sides. the panel is made from 18 ±0,5 mm thk pre laminated boards as per is 12823 with 0.8 mm thick pvc beading on all edges. pedestal wooden panel ( 1 box+ 1 filling) back wooden panel is made from 18 ±0.5 mm thk pre laminated boards as per is 12823 with pvc beading on all sides. the panel is made from 9 ±0.5 mm thk pre laminated board. 41 sstp steel table with stainless steel top of size 1180 x 750 x 750. worktop the top is in stainless steel brushed finish with plb insert for durability. easy to clean and maintain hygiene. side frames made from 30mm x 30mm x 1.5mm thick m.s powder coated tubes at base which are welded and are fixed to top with screws. the bottom ends are closed with plastic buffers. ms shade : s/g metallic dark grey (nerocoat 9000626), cross member made from 30mm x 30mm x 1.5mm thick m.s powder coated tube, which is welded and bolted to side frames. 42 tp a teaching platform with the dimensions of length 6 ft x breadth 4 ft x height 1.5 ft with 19 mm plywood on top, shall be rectangular hallow box shape without legs. 43 tp b teaching platform with the dimensions of length 12 ft x breadth 6 ft x height 1.5 ft with 19 mm plywood on top, shall be rectangular hallow box shape without legs. 44 pod wooden podium with dimensions: 45 h x 20 w x 15 d to 50 h x 25 w x 20 dpresenter side height: 40 to 45shelves: 20 h x 20 w x 10 d to 25 h x 25 w x 12 dproduct weight: 50 to 55 lbs.shipping weight: 65 to 70 lbs.material: scratch resistant high pressure laminate.the top of the table shall be provided 19 mm ost. the table shall be neatly finished and polished. 45 smchr seminar chair with understructures could be revolving or fixed type as per need. option of hinge type and retractable desk let.desklet 100% voc free powder coating knock down design reducing transportation emissions designed for long life 46 ot e office table of size 900 x 590 x 750 made of ms erw square tube 18 mm x 25mm x 1.2mm thick with pre laminated top size 1199 x 590 x 750 mm thick with single side one drawers, drawer unit made of .5mm thick ms crca sheet, all steel components have powder coated paint 47 wb l non magnetic long white board 8 x 4 size and surface material 0.62 to 0.72 mm thick laminate sheet with extra melamine surface,core material 8 mm thick particle board,backing material 0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour,aluminium frame anodized 5 microns extruded aluminium section designation 63400 as per is:1285 2002 16 mm thickness. 48 bkrk a double sided book rack with the dimensions width 900mm, height: 1850mm, depth: 600mm, rigid knockdown construction. construction, material crca0.8mmthickness, finish epoxypolyester powder coated to the thickness of 50 microns (+/ 10).number of adjustable shelf: five adjustable shelves on one side (total 12 loading levels). uniformlydistributed load capacity per each shelf is 80 kgmaximum. label holder & range indicator label holder & range indicator on eachmain unit for inserting labels. 49 bkrk b single sided book rack with the dimensions width 900mm, height: 1850mm, depth: 316mm, rigid knockdown construction, material crca 0.8 mm thickness,finish: epoxypolyester powder coated to the thickness of 50 microns (+/ 10).,number of adjustable shelf five adjustable shelves. (total 6 loading levels). uniformlydistributed load capacity per each shelf is 80 kg maximum, label holder & range indicator label holder & range indicator on eachmain unit for inserting labels. 50 m r magazine rack with overall dimensions of all steel periodical display rack shall be 900mm(w)x450mm(d)x1830mm(h). rigid knockdown construction ,panels shall be made from crca 0.6 mm thick and front frame shall be made from crca 0.8 mm thick . crca d grade as per is 513 . there shall be 5 level racks , display tray shall be suitable for fullscape size magazines,periodicals, aesthetically appealing metal tray at an angle for easy viewing . receding facility to access the storage behind . sliding on plastic rollers . behind storage shelving each of 5 level has a behind storage shelf . uniformly distributed load capacity per each shelf is 40 kg . leveler shall be screw type with hex plastic base and finish shall be epoxy polyester powder coated to the thickness of 50 microns. 51 glsd almirah with glass door size 916mm(w) x 486mm(d) x 1980mm #(h) # excluding leveler, construction & material • welded construction, • 0.7mm thk (±0.07mm) crca* for shelf,• 0.8mm thk (±0.08mm) high yield strength crca** for doors and back,• 0.9mm thk (±0.08mm) crca* for all other components,crca ‘d’ grade as per is:513,crca ‘d’ grade high yield strength as per is:513,locking & handle • brass handle with • two way locking mechanism with shooting bolt, shelves • height wise adjustable shelf mounting • uniformly distributed load capacity per each full shelf is 40 kg maximum, • 4nos. of adjustable full shelf, • box file a4 size (85wx345hx285d) can be stored vertically on three shelves and the clear space above fourth shelf is 240mm,• m10 screw type leveler with hex plastic base,finish • epoxy powder coated to the thickness of 50 microns (+ 10). 52 dd dual desk is specially designed for rugged use with overall dimentions of l1054 x w980 x h760 mm and all edges are fillet. the desk is made of pressed formed ms crca section & crca tube fitted with pre laminated particle board top, seat & back with injection molded ppcp edge. hanger for water bottle and bag. space for keeping pen, pencil and scale. the overall appearance of the product shall be as per photograph.top injection molded ppcp edge. size : 1054x450x18 mm thk. particle board.seat injection molded ppcp edge. seat height : 450 mm , seat size : 1054x304x18 mm thk. particle board.back injection molded ppcp edge. back size : 1054x154x18 mm thk. particle board.shelf shelf 0.8 mm thk. crca sheet. bullnose front edge with stiffner 1 mm thk crca.modesty modesty 0.8 mm thk. crca sheet. slot perforated.tie members horizontal tie members 25x25x1.2 mm thk. crca pipe.footrest footrest pressed formed crca section 1.5 mm thk. side frame side frame c section pressed formed 1 mm thk.crca sheet welded with 25x50x1.2 mm thk tube. and back rest pipe ø25 x 1.2 mm thk. top end rounded.cap & levellers all pipe caps are curved ppcp material.finish all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface. 53 split ac split air conditioner with 1.5 tonne capacity, star rating 5 star, cooling capacity (kw/hr):above 3000 (kw/hr),roatart type compressor,compressor warranty 10 years , air circulation ( cfm h/m/l) above 450 /350/300, moistur remover(l /hr) above 1.5, idu noise level (dba ≤55/50/45,control microprocessor control codeless remort power source (v/hz/φ 230/50/1,display led/lcd, voltage stabelizer wall mount type with time delay high and low voltage and thermal overaload protection, capacity 4 kva, input voltage 130 to 300 voltage output voltage 200 to 240 v , high voltage cutoff, efficiency ≥ 95%, frequency 50 hz. 54 gntr c generator with an ouput capacity of 100 to 125 kva 55 drs t dressing table of size 460w x 486d x 1710h mm , mirror w x h: 362 mm x 1156 mm dressing table comes with a long mirror, two storage drawers, and a stool. available in wenge color, the dresser is crafted from good quality mdf wood, making it sturdy and lasting. the shelves of this stylish dressing table can be used to keep items like perfume bottles, hair products, and medicines, for that clutter free look. the stool, also wenge color with an orange colored cushion, offers comfortable seating, while the full length mirror is perfect to dress up, and check your overall ensemble. 56 s al m steel almirah with mirror of size 900w x 507d x 1950h mm rafted from prime steel, your slimline cupboard will be resistant to corrosion and peststhis cupboard comes with 2 easily adjustable shelvesthe hanging rod inside the cupboard ensures ample space for your daily wear, suits, sarees and/or dressesknock down construction makes shifting and handling of slimline easieravailable with over head unit option to maximize vertical space usage you can also choose to have a mirror with slimlinestylish snap shut flush handle enhances slimline’s aesthetics. 57 audi c auditorium chair seat/back assembly: the seat and back are made up of 1.2±0.1 cm. thick hot pressed plywood measured as per qa method described in ocp qlta p14 18 and upholstered with fabric and moulded polyurethane foam. the back is, flexing type.back size 47.0 cm. (w) x 51.0 cm. (h), seat size 47.0 cm. (w) x 47.0 cm. (d). 2. high resilience (hr) polyurethane foam: the hr polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf as per is:7888 for 25% compression.3. armrests :the one piece armrests are made of black integral skin polyurethane foam with 50 70 shore hardness and reinforced with m.s. insert. the armrests are scratch and weather resistant.5. understructure assembly: it is made of dia. 2.54±0.03cm. x 0.2±0.016cm. thk. m.s.e.r.w. tube with connecting strips made of 0.5 ± 0.05 cm. thk. hr steel welded to it for holding the seat. the assembly is powder coated ( dft 40 60 microns ).the auditorium chair is designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre requisite godrej doc no: stg 129368.overall width 57.0, depth 57.0, height 86.0, seat height 44.0 cm. 58 ss mc movable chair made out of stainless steel, understructure seat and back are made up of injection moulded high impact strength polypropylene polymer compound with indoor grade uv resistance *seat size: 52.5 cm. (w) x 53.2 cm. (d), * back size : 51.6 cm. (w) x 40.5 cm. (h) .s.s. understructure: the tubular welded frame is made from dia 2.22 ± 0.03 cm x o.12 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.12 ± 0.0128 cm stainless steel 202 grade tube. the tubes are buff polished to give shiny finish. ...

Uttar Bihar Gramin Bank - Bihar

29113328 tender from empanelled cash safe security equipment vendors for supply and installation of security equipments safe cum with safe deposit lockers fire resistant filling cabinets and depository cabinets at branches offices...

Rail Wheel Plant - Bihar

26506269 supply of , phosphate easter fire resistant hydrualic fluid hisafe dr 46 of m/s hardcastle and waud manufacturing co ltd or similar in other make like iocl,bpcl, hpcl, balmer lawrie & co. ltd, raj petro, sah petroleum ltd, fuchs lubricants(i) pvt. ltd.....

Uttar Bihar Gramin Bank - Bihar

26069364 supply and installation of security equipment: cash safe, gold safes, strong room doors, safe deposit locker, safe cum with safe deposit locker, fire resistant filling cabinets and depository cabinets...

Indian Railway - Bihar

18019777 tender for phosphate easter fire resistant hydraulic fluid hisafe dr 46 of m/shardcastle and woud manufacturing co ltd or phosphocent 246 of m/s fuchs ltd orserve fyress hfdr 46 of m/s indian oil corporation ltd packed in 200 ltrs net in new ,sound and non returnable steel drums. technical parameters is as per attachedannexure a...

Bank Of India - Bihar

6292130 supply of following items of security equipment: a. cash safes, class a/aa b. safe deposit lockers cabinets c. safe with safe deposit lockers i. with class a safe d. fire resistant filing cabinet 4 drawer (2hr rating)...

Semi-Conductor Laboratory - Bihar

4106367 providing and fixing fire resistant doors with panic bar in barrack of scl housing complex in sector 71, s.a.s nagar and fg store in scl, sector 72 s.a.s nagar’. ...