37542727 bids are invited for supply of lc 1 ) pedestal 2 ) pedestal angle 3 ) main weight 4 ) plate weight 5 ) drum wheel with shaft 6 ) trunion bracket with a & b clamp 7 ) bell arrangement 8 ) stop board with reflector 9 ) main boom 10 ) boom 4 mtr long 11 ) boom 3 mtr long 12 ) boom 2mtr long 13 ) boom 1.5 mtr long 14 ) lock post 15 ) winch machine with handle 16 ) guy rod...
37381117 supply of wire rope, heavy duty wire rope sling for pulling type winch with standard loop and eye hook at one end weight of coach 70 ton, length 100 mtrs. rope dia 18 mm, fmc, 6x19, ungalvanised. wire rope as per is 2266:2002 or latest. brand / make dbxt or similar. [ warranty period: 30 months after the date of delivery ] ...
36998465 procurement of set of wire ropes, derrick wire rope ( new design ) wire rope ( left ) of construction 8x26 ( iwrc ) plastic impregnated, compact strands, self lubricated, a26x390m, rgg / lgg, ordinary lay, un galvanized, 1770 n / mm2, minimum breaking load 504.7 kn with accessories as per drg. no. jmp / cr 191 / 03 ( alt 7 ) . [ warranty period: 30 months after the date of delivery ] , recovery winch wire rope ( new design ) wire rope of construction 35x7 ( iwrc ) of special design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction ) , compact strands, self lubricated rotation resistant, d18x110m, lgg, langs lay, un galvanized , 1960 n / mm2, minimum breaking load 246 kn with accessories drg. no. jmp / cr 192 / 03 ( alt 6 ) . [ warranty period: 30 months after the date of delivery ] , derrick wire rope ( new design ) wire rope ( right ) of construction 8x26 ( iwrc ) plastic impregnated, compact strands, self lubricated, a26x390m, rgg / lgg, ordinary lay, un galvanized, 1770 n / mm2, minimum breaking load 504.7 kn with accessories as per drg. no. jmp / cr 191 / 03 ( alt 7 ) . [ warranty period: 30 months after the date of delivery ] , set of wire ropes ( 04 items ) as per annexure i. [ warranty period: 30 months after the date of delivery ] , aux. hoist wire rope ( new design ) wire rope of construction 35x7 ( iwrc ) of special design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction ) , compact strands, self lubricated rotation resistant, d22x130m, rgg, langs lay, un galvanized , 1960 n / mm2, minimum breaking load 373 kn with accessories drg. no.jmp / cr 190 / 03 ( alt 8 ) . [ warranty period: 30 months after the date of delivery ] , main hoist wire rope ( new design ) wire rope of construction 35x7 ( iwrc ) of special design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction ) , compact strands, self lubricated, rotation resistant, d26x470m, rgg langs lay, un galvanized, 1960 n / mm2, minimum breaking load 519.5 kn with accessories drg. no. jmp / cr 189 / 2003 ( alt 7 ) . [ warranty period: 30 months after the date of delivery ] ...
36888971 supply of wire ropewire rope, heavy duty wire rope sling for pulling type winch with standard loop and eye hook at one end weight of coach 70 ton, length 100 mtrs. rope dia 18 mm, fmc, 6x19, ungalvanised. wire rope as per is 2266:2002 or latest. brand / make dbxt or similar. [ warranty period: 30 months after the date of delivery ] ...
36149621 bids are invited for mechanical engineering labs screw jack apparatus with weights worm and worm wheel: single with weights worm 2 and worm wheel: double with weights worm 2 and worm wheel: triple with weights wheel and differential axle 30 cm with weight winch 2 crab single purchase with weight winch 2 crab double purchase with weight universal force table ( normal ) moment of inertia of flywheel 25 cm with weights parallel forces apparatus ( dial type 10 kg. balance ) 2 simply supported beam apparatus with weights friction slide apparatus with weight 2...
35937697 supply of esign, engineering, manufacturing, supplying , testing and commissioning of dbxt brand 1 ton capacity lifting winchesign, engineering, manufacturing, supplying , testing and commissioning of dbxt brand 1 ton capacity lifting winch, design, engineering, manufacturing, supplying , testing and commissioning of dbxt brand 1 ton capacity lifting winch as described here in after. winch particulars ( i ) capacity 1 ton ( ii ) speed 4 6 m / min ( appx. ) ( iii ) rope length 20 meters. ( iv ) power supply n415 + / 10%, 50 hz 3 phase ac. ( v ) control voltage 110v, ac ( vi ) ambient temp 45 degree c ( vii ) control pendant push button & control desk. the winch will consists of ms frame with rope drum, drum housing fitted with brg. & geared brake motor, etc, design as per is: 9507 1979 and other relevant standards. make: dbxt or similar note: material shall be accepted from oem or its authorized dealer only. guarantee / warranty shall be provide along with delivery as per irs condition. [ warranty period: 30 months after the date of delivery ] ...
35760139 bids are invited for lab equipments for workshop & me lab 1. screw jack apparatus with weights 1 2. worm and worm wheel :: single with weights 1 3. worm and worm wheel :: double with weights 1 4. worm and worm wheel :: triple with weights 1 5. wheel and differential axle 30 cm with weight 1 6. winchcrab single purchase with weight 1 7. winch crab double purchase with weight 1 8. universal force table ( normal ) 1 9. momentof inertia of flywheel 25 cm with weights 1 10. parallel forces apparatus ( dial type 10 kg. balance ) total quantity : 1...
35720993 bids are invited for electric_winch m6313190500 100200620 , electric_winch m6313191000 100200620 , winch machine m6313190500 100217903 total quantity : 8...
35720893 bids are invited for electric_winch m6313190500 100200620 , electric_winch m6313191000 100200620 , winch machine m6313190500 100217903 total quantity : 8...
35623923 supply of procurement of wire ropes for old design of 140 ton craneprocurement of wire ropes for old design of 140 ton crane,main hoist wire rope (old design) wire rope of construction 35x7 (iwrc of special design, avoiding cross over between the strands of the core & reducing the danger of the internal rope destruction), compact strands, self lubricated, rotation resistant, d26x400m,rgg,langslay, un galvanized, 1960 n/mm2 , minimum breaking load 519.5 kn with accessories as per drg no. sk no. jmp/cr 184/03, alt. 7, make: diepa/casar/usha martin , aux. hoist wire rope (old design) wire rope of construction 35x7 (iwrc of special design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction), compact strands, self lubricated, rotation resistant, d22x120m,rgg, langslay, un galvanized, 1960 n/mm2, minimum breaking load 373 kn with accessories as per drg no. sk no. jmp/cr 185/03,alt. 6 , make: diepa/casar/usha martin , derrick hoist wire rope (old design) wire rope (left) of construction 8x26 (iwrc) plastic impregnated, compact strand, self lubricated, a 26 x 130m, rgg/lgg, ordinary lay, un galvanised, 1770n/mm2 , minimum breaking load 504.7 kn with accessories as per drg no. sk no. jmp/cr 186/03,alt. 7, make: diepa/casar/usha martin. , derrick hoist wire rope (old design) wire rope (right) of construction 8x26 (iwrc) plastic impregnated, compact strand, self lubricated, a 26 x 130m, rgg/lgg, ordinary lay, un galvanised, 1770n/mm2 , minimum breaking load 504.7 kn with accessories as per drg no. sk no. jmp/cr 186/03,alt. 7, make: diepa/casar/usha martin. , recovery winch wire rope (old design) wire rope of construction 35x7 (iwrc of spl design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction), compact strands , self lubricated, rotation resistant, d16x70m,rgg, langslay, un galvanized, 1960 n/mm2 , min. breaking load 197.2 kn with accessories as per drg no. sk no. jmp/cr 187/03,alt.9, make: diepa/casar/usha martin...
35602968 bids are invited for mechanical engineering lab equipment screw jack apparatus with weights , worm and worm wheel, wheel and differential axle 30 cm with weight, winch crab single purchase with weight , universal force table ( normal ) , moment of inertia of flywheel , parallel forces apparatus ( dial type 10 kg. balance ) , simply suported beam apparatus with weights, friction slide apparatus with weight, t hemispherical sectional models of screw thread, 2 bolts of four typ, 2 foundation bolts ( with nomenclatur, 2 screw jack apparatus with weigh, 2 bush bear, 2 plummer block or pedestal bear, 2 foot step bear, 2 flexible coupling...
35339050 tender for fabrication and erection of 3 nos gate at left canal with hoisting arrangement, ms platform, 5 nos crest shutter, 40nos tie rod and 1 no replacement of u/s gate bearing and nut bolt of panchaney irrigation scheme and replacement of chequered plate of hoist bridge winch crab pinion 2 nos and 2 nos wire rope...
35114223 bids are invited for mechanical engineering lab equipment screw jack apparatus with weights , worm and worm wheel :: single with weights , winch crab single purchase with weight , universal force table ( normal ) , simply suported beam apparatus with weights , friction slide apparatus with weight , hemispherical sectional models of screw threads...
34984520 bids are invited for lab equipments for workshop & me lab 1. screw jack apparatus with weights 1 2. worm and worm wheel :: single with weights 1 3. worm and worm wheel :: double with weights 1 4. worm and worm wheel :: triple with weights 1 5. wheel and differential axle 30 cm with weight 1 6. winchcrab single purchase with weight 1 7. winch crab double purchase with weight 1 8. universal force table (normal) 1 9. momentof inertia of flywheel 25 cm with weights 1 10. parallel forces apparatus (dial type 10 kg. balance) (q3) total quantity : 1...
34734703 supply of wire ropes for 140t cranewire ropes for 140t crane, derrick wire rope ( new design ) wire rope of construction 8x26 ( iwrc ) plastic impregnated, compact strands, self lubricated, a26x390m, lgg, ordinary lay, un galvanized, 1770 n / mm2, minimum breaking load 504.7 kn with accessories for 140t new design crane. drg. no. jmp / cr 191 / 03 ( alt 7 ) . , set of wire ropes ( 04 items ) as per annexure b , main hoist wire rope of construction 35x7 ( iwrc ) of special design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction ) , compact strands, self lubricated, rotation resistant, d26x470m, rgg, langs lay, un galvanized, 1960 n / sq.mm , minimum breaking load 519.5 kn with accessories for 140t new design crane. drg.no.jmp / cr 189 / 03, ( alt 7 ) . , aux. hoist wire rope of construction 35x7 ( iwrc ) of special design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction ) , compact strands, self lubricated, rotation resistant, d22x130m, rgg, langs lay, un galvanized , 1960 n / sq.mm , minimum breaking load 373 kn with accessories for 140t new design crane. drg.no.jmp / cr 190 / 03, ( alt 8 ) . , derrick wire rope of construction 8x26 ( iwrc ) plastic impregnated, compact strands, self lubricated, a26x390m, lgg, ordinary lay, un galvanized, 1770 n / sq.mm, minimum breaking load 504.7 kn with accessories for 140t new design crane. drg. no.jmp / cr 191 / 03, ( alt 7 ) . , derrick wire rope of construction 8x26 ( iwrc ) plastic impregnated, compact strands, self lubricated, a26x390m, rgg, ordinary lay, un galvanized, 1770 n / sq.mm, minimum breaking load 504.7 kn with accessories for 140t new design crane. drg. no.jmp / cr 191 / 03, ( alt 7 ) . . , recovery winch wire rope of construction 35x7 ( iwrc of special design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction ) , compact strand, self lubricated, rotation resistant, d18x110m, lgg, langs lay, un galvanized, 1960 n / sq.mm, minimum breaking load 246 kn with accessories for 140t new design crane. drg.no.jmp / cr 192 / 03, ( alt 6 ) . , derrick wire rope ( new design ) wire rope of construction 8x26 ( iwrc ) plastic impregnated, compact strands, self lubricated, a26x390m, rgg, ordinary lay, un galvanized, 1770 n / mm2, minimum breaking load 504.7 kn with accessories for 140t new design crane. drg. no. jmp / cr 191 / 03 ( alt 7 ) . , recovery winch wire rope ( new design ) wire rope of construction 35x7 ( iwrc ) of special design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction ) , compact strands, self lubricated rotation resistant, d18x110m, lgg, langs lay, un galvanized , 1960 n / mm2, minimum breaking load 246 kn with accessories for 140t new design crane. drg. no.jmp / cr 192 / 03 ( alt 6 ) . , set of wire ropes ( 04 items ) as per annexure a...
34689025 bids are invited for mechanical engineering lab 01 engineering mechanics lab a screw jack apparatus with weights 2 b worm and worm wheel :: single with weights 2 c worm and worm wheel :: double with weights 2 d worm and worm wheel :: tripple with weights 2 e wheel and differential axle 30 cm with weight 2 f winch crab single purchase with weight 2 g winch crab double purchase with weight 2 h universal force table ( normal ) 2 i moment of inertia of flywheel 25 cm with weights 2 j parallel forces apparatus ( dial type 10 kg. balance ) 2 k simply suported beam apparatus with weights 1 l friction slide apparatus with weight 2 02 machine drawing lab a hemispherical sectional models of screw threads 2 b hemispherical sectional models of screw threads nuts 2 c standard bolt 2 d bolts of four types 2 e foundation bolts 2 f foundation bolts ( with nomenclature ) 2 g locking arrangement of bolts 2 h rivetted joints wooden 2 i screw jack apparatus with weights 2 j bush bearing 2 k plummer block or pedestal bearing 2 l foot step bearing 2 m flexible coupling 2 n flanged coupling 2 o stuffing box 2 p connecting rod 2 q spark plug 2 ( q3 ) total quantity : 1...
34004744 supply of wire ropes for poh of 140t cranewire ropes for poh of 140t crane, derrick wire rope ( new design ) wire rope of construction 8x26 ( iwrc ) plastic impregnated, compact strands, self lubricated, a26x390m, lgg, ordinary lay, un galvanized, 1770 n / mm2, minimum breaking load 504.7 kn with accessories for 140t new design crane. drg. no. jmp / cr 191 / 03 ( alt 6 ) , set of wire ropes ( 04 items ) as per annexure b , main hoist wire rope of construction 35x7 ( iwrc ) of special design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction ) , compact strands, self lubricated, rotation resistant, d26x470m, rgg, langs lay, un galvanized, 1960 n / sq.mm , minimum breaking load 519.5 kn with accessories for 140t new design crane. drg.no.jmp / cr 189 / 03, alt 6. , aux. hoist wire rope of construction 35x7 ( iwrc ) of special design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction ) , compact strands, self lubricated, rotation resistant, d22x130m, rgg, langs lay, un galvanized , 1960 n / sq.mm , minimum breaking load 373 kn with accessories for 140t new design crane. drg.no.jmp / cr 190 / 03, alt 7. , derrick wire rope of construction 8x26 ( iwrc ) plastic impregnated, compact strands, self lubricated, a26x390m, lgg, ordinary lay, un galvanized, 1770 n / sq.mm, minimum breaking load 504.7 kn with accessories for 140t new design crane. drg. no.jmp / cr 191 / 03, alt 6. , derrick wire rope of construction 8x26 ( iwrc ) plastic impregnated, compact strands, self lubricated, a26x390m, rgg, ordinary lay, un galvanized, 1770 n / sq.mm, minimum breaking load 504.7 kn with accessories for 140t new design crane. drg. no.jmp / cr 191 / 03, alt 6. . , recovery winch wire rope of construction 35x7 ( iwrc of special design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction ) , compact strand, self lubricated, rotation resistant, d18x110m, lgg, langs lay, un galvanized, 1960 n / sq.mm, minimum breaking load 246 kn with accessories for 140t new design crane. drg.no.jmp / cr 192 / 03, alt 5. . , derrick wire rope ( new design ) wire rope of construction 8x26 ( iwrc ) plastic impregnated, compact strands, self lubricated, a26x390m, rgg, ordinary lay, un galvanized, 1770 n / mm2, minimum breaking load 504.7 kn with accessories for 140t new design crane. drg. no. jmp / cr 191 / 03 ( alt 6 ) , recovery winch wire rope ( new design ) wire rope of construction 35x7 ( iwrc ) of special design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction ) , compact strands, self lubricated rotation resistant, d18x110m, lgg, langs lay, un galvanized , 1960 n / mm2, minimum breaking load 246 kn with accessories for 140t new design crane. drg. no.jmp / cr 192 / 03 ( alt 5 ) , set of wire ropes ( 04 items ) as per annexure a...
33967262 bids are invited for mech lab equipments ( q3 ) , milling machine is:6893 , is:8614 , is:9474 ( q2 ) total quantity : 2 1 engineering mechanics lab. equipment a screw jack apparatus with weights screw jack ( without weights)all metallic construction accurately machine cut screw with a pitch of 5 mm carrying a double fanged turn table of about 20 cm diameter. fitted on a heavy cast iron base and complete with two adjustable pulleys, cord and hooks. 02 b worm and worm wheel :: single with weights an all metallic self contained apparatus useful for demonstrating the efficiency for worm and wheel and also the principle of work. consisting of a machine cut worm gear of 25 cm diameter, carrying a meta l drum of 12 cm diameter, and machine cut worm on steel spindle carrying a 12 cm diameter pulley. 02 c worm and worm wheel :: double with weights an all metallic self contained apparatus useful for demonstrating the efficiency of worm and wheel and also the principle of works. consisting of machine cut worm gear of 25 cm diameter, carrying a metal drum on 12 cm diameter, and machine cut worm on steel spindle carrying a 12 cm diameter pulley. double weight 02 d worm and worm wheel :: tripple with weights an all metallic self contained apparatus useful for demonstrating the efficiency of worm and wheel and also the principle of work, consisting of machine cut worm gear of 25cm diameter carrying a metal drum of 12 cm diameter pulley. 02 e wheel and differential axle 30 cm with weight the axle having dia of 15 & 7.5 cm respectively giving a ratio of 1:2:4. centre of the wheel which is mounted on ball bearing in cast iron brackets reducing friction to minimum. 02 f winch crab single purchase with weight fitted with heavy cast iron wall brackets. the grooved wheel is of 25 cm diameter and gears are machine cut. this apparatus is used for experiments in efficiency of mechanical advantage weights are included. 02 g winch crab double purchase with weight there are two geared wheels; one wheel carries a big axle round which a string is wound to lift a load w. the second geared wheel (upper one) carries a pulley which a string is wound to carry the effort p. suppose the first geared wheel (with axle) has n1 teeth and the second geared wheel (with pulley) is given n revolutions the first geared wheel will take : n(n1/n2 ) 02 h universal force table (normal) for experimentally verifying the lows of triangle, parallelogram and polygon if force comprising of equal circular 40cm.dia.aluminiym disc graduated into div ,compel with levelling screws, clamping device to fix the table ,string and five sets iron nicked slotted weight. 02 i moment of inertia of flywheel 25 cm with weights. experiment on the moment of mass inertia of a flywheel. steel flywheel. steel shaft used as drive pulley. set of weights ball bearing mounted shaft. anodised aluminium base plate wall mounted. 25 cm with weights 02 j parallel forces apparatus (dial type 10 kg. balance) verification of condition of equilibrium of parallel forces, law of lever and forces on beam etc. consisting of two compression thrust type 10 kg. dial type compression balances fixed on wooden polished board, a wooden bar with steel back plate 02 2 machine drawing lab. equipment a hemispherical sectional models of screw threads whitworth, square, butteress, acme. right and left hand screw; set of all the six threads made of aluminium metal mounted on base with nomeclature 02 b hemispherical sectional models of screw threads nuts set of six sectional model of nuts, properly mounted on base with nomenclature. 02 c standard bolt diameter 25 mm, length about 15 cm. approximately. properly constructed model is of aluminium alloy, complete with whit worth nut, lock nut and washer. 02 d bolts of four types ordinary. eye type, stud type and set screw type. properly constructed and mounted on base with nomenclature. 02 e foundation bolts 02 rag bolt, cotter bolt and lewis bolt a set of three aluminium models fitted on base. f foundation bolts (with nomenclature) four different types of bolts with nomenclature mounted on base. 02 g locking arrangement of bolts check nut, castle nut. grooved nut, swan nut, stop plate nut and spring washer nut. with the help of these models actual locking systems can be demonstrated. 02 h rivetted joints wooden 02 i screw jack apparatus with weights all metallic construction accurately machine cut screw with a pitch of 5 mm carrying a double fangedturntableofabout20cmdiameter.fittedon a heavy cast iron base and complete with two adjustable pulleys, cord and hooks. with weight 02 j bush bearing 02 k plummer block or pedestal bearing 02 l foot step bearing 02 m flexible coupling 02 n flanged coupling 02 o stuffing box 02 p connecting rod 02 q spark plug 02 3 fluid machinery a reciprocating pump test rig description: the experimental unit provides the basic experiments to get to know the operating behaviour and the important characteristic variables of piston pumps. setup features a closed water circuit with water tank, a piston pump with variable speed via a frequency converter and an air vessel. the piston of the pump is mounted in a housing and can be observed during operation. the cycle that takes place (intake and discharge of water) can be shown clearly in the p v diagram. the pulsating pressure curve of the pump can be damped with the aid of the air vessel. flow rate and head are adjusted via a needle valve and overflow valve. the experimental unit is fitted with manometer for pressure and sensor for flow rate. pressure manometer measures the pressure at the outlet of the pump. specification: · functioning and operating behaviour of a piston pump · closed water circuit contains piston pump with variable speed via frequency converter, transparent water tank and air vessel ·valve for adjusting the flow rate · overflow valve for adjusting the head · pulsation damping of the head using air vessel with bleed valve ·manometer for pressure at pump outlet. technical details: piston pump speed: 30…180min 1 max. flow rate: 135l/h max. head: 40m drive motor power: 180w gear transmission ratio: i=7,5 overflow valve: 1…4bar measuring ranges pressure (outlet): 0…5bar flow rate: 0,2…6l/min experimentation: principle of operation of a piston pump recording of pump characteristics pressure curves of delivery pressure p v diagram determination of efficiencies 01 b centrifugal pump test rig ms tank with frp lining unit, centrifugal pump of size 25x25mm todischarge about 60 lpm at 12m total head when run at maximum 01 speed.motor1hpdcelectricmotorisimarkedspeedvariationthirstiercontrolled arrangement with panel board. electrical panel: dp switch, isimark & energy meter for the measurement of input power. sump tank:size : 800 x 800 x 500 mm , measuring tank : size 400x400x600mmprovided with standard fittings for measuring discharge of water. digitalstop watch, others: piping system consisting of pipes, gate valve (isimark) & fittings with pressure gauge,a standard pump of 1 hp, allaccessories and spares for normal running maintenance of the machine (1set), 2 hard copies of operation manual willbe supplied along with theset up c hydraulic bench the hydraulic bench should be suitable for the use of basic fluid mechanics experiments of fluid mechanics. it should supply the water in the closed circuit; the determination of volumetric flow rate and the positioning of the experimental unit on the working surface of the base module and the collection of dripping water. the closed water circuit consists of the sump tank with the submersible pump and the measuring tank arranged above, in which the returning water is collected. the measuring tank is stepped, for large and smaller volumetric flow rates. a measuring cylinder should be provided for very small volumetric flow rates. a stopwatch should also be provided for measuring the flow rate. the top surface should enable the various experimental units to be easily and safely positioned. specification 1. base module for supplying experimental units in fluid mechanics 2. closed water circuit with storage tank, submersible pump and measuring tank. 3. measuring tank divided into two for volumetric flow rate measurement. 4. measuring cylinder with scale for very small volumetric flow rates.. 5. measurement of volumetric flow rate by using a stopwatch. 6. work surface with inside edge for safe placement of the accessories and for collecting the dripping water. technical data pump power consumption:500 750 w max. flow rate:200 450l/min max. head: 7 14m storage tank, contents: 180l measuring tank at large volumetric flow rates: 40l at small volumetric flow rates: 10l measuring cylinder with scale for very small volumetric flow rates content: 2l utility required 230v, 50/60hz,1 phase 01 d air blower apparatus description: this equipment comprises of a fd centrifugal blower coupled to a motor. three interchangeable impellers with forward, backward and radial vanes are provided with the test rig. a pitot tube is provided in the delivery line of blower for static and dynamic pressure measurement. power input to the dc motor is varied by means of a thyristor controlled dc drive to vary the rpm of motor. a rpm indicator with proximity sensor indicates the rpm of blower. technical details: motor: dc motor with thyristor controlled dc drive for variable speed blower: centrifugal, forced draft type impeller (3 nos.): forward curved, backward curved & radial curved pitot tube (with manometer): for static, dynamic & differential pressure measurement. stop watch: electronic control panel comprises of : standard make on/off switch, mains indicator, etc. energy measurement: electronic energy meter. rpm measurement: digital rpm indicator with proximity sensor. instruction manual: an english instruction manual will be provided along with the apparatus. experimentation: · to study the effect of forward curved, back curved and radial curved impeller. 01 · to find out the discharge, head and efficiency of the centrifugal blower. · to plot the graph efficiency vs discharge · to plot the graph discharge vs head 4 dynamics of machinery a four bar chain mechanism 01 b slide crank mechanism set of 3 01 c slip & creep measurement apparatus the apparatus consists of a variable speed d.c. motor, driving pulley and driven pulley of equal diameter. the pulleys ore mounted on input shaft (motor shaft) and output shaft. the driven pulleys can slide on the base with bearing block to change initial tension in belt. brake drum mounted on output shaft helps to measure power output. the motor speed is varied by dimmer stat. a two channel rpm indicator is provided to measure speeds of driven and driving pullies respectively. specifications: d.c. motor:1 hp 1500 rpm, variable speed. driving & driven pullies of equal diameters. brake drum along with spring balance. flat belt of fixed length of following materials: fabric belt , rubber belt tightening arrangement, speed controller unit, two channel digital apm indicator stroboscope. range of experiment: to measure co efficient of friction between pulley material and different belt materials. to measure power transmitted with varied belt tensions and plotting graph of (t1 t2). tension characteristics. to measure percentage slip at fixed belt tension by varying load on brake drum and plot graph of (t1 t2) vs percentage slip le. slip characteristics. finding a creep zone from graph. to measure belt slip speed and observe the limiting value float at constant speed when the slip just starts. 01 d cam analysis machine the apparatus is designed to study the cam profiles and performance of cam and follower system. the apparatus consists of a shaft supported by ball bearings upon which three different types of cams be mounted. the push rod for follower is supported vertically, which can adopt three different types of followers. cams and followers can be changed easily. a variable speed motor rotates the cam. a dial gauge permits plotting of follower displacement with respect to cam position. by operating the system at different speeds, jump speed can be found and also the effect of weight and spring force on jump speed can be studied. jump can be visualized also with the help of an optional stroboscope. specifications: · cam eccentric, tangent and circular arc type one each · follower mushroom, flat faced end roller type one each · cams and followers are hardened to reduce wear of the surfaces. · variable speed motor coupled to cam shaft of suitable range and variac · a dial gauge to note the follower displacement 01 e epicyclic gear train and torque holding apparatus it is a motorized unit consisting of sun gear mounted on input shaft. these planet gears are mounted on a common arm to which output shaft is fitted. loading arrangement is provided for loading the system and to measure holding torque. specifications external type epicyclic gear train: bearing blocks for input & output shafts a gear train with holding drum and holding internal typo epicyclic gear train: a compact gear train. variable speed d.c. motor rope brake arrangement to measure output torque and holding torque. control panel comprising of : digital ammeter and voltmeter. rpm indicator. speed controller. 01 f motorized gyroscope 01 the apparatus consists of a rotor mounted in bearings, this rotor is free to rotate about a. its own axis i.e. axis of spin. b. axis at precession. c. axis of gyroscopic couple the rotor is connected to the variable speed motor. the weight of the motor is balanced by another weight which is on either side of the rotor, by putting weights on the weight platform torque can be supplied to rotor, which is also called gyroscopic couple specifications: rotor diameter 250mm free about 3 axis of rotation driven by variable speed motor. dimmer stat to control the motor speed. stopwatch to measure the angular speed about the axis of procession. weights: 0.2kg, 0.5kg, 1kg. g motorized governor apparatus the unit consists of a main spindle driven by a variable speed motor. three different governor assemblies can be mounted over the spindle. pointer measures the lift of the governor. students can calculate characteristic of governor and compare their performance viz. sensitivities, stability, governor effort, etc specifications governor assemblies hartnell, porter& porpel governor assembly one each with rotating weights. variable speed fhp d.c. motor to drive the main spindle. sliding weights for porter & proell governor. scale & a pointer to measure governor lift. spring & spring compression adjustment arrangement. 01 h static & dynamic balancing apparatus. equipment is designed for carrying out the experiment for balancing 8 rotation mass systems. the apparatus consists of a stainless steel shaft fixed in a rectangular frame. a set of four blocks with a clamping arrangement is provided for static balancing. each block is individually clamped on shaft and its relative weight is found out using cord and container system in terms of number of steel bans. for dynamic balancing a moment polygon is drawn using relative weights and angular and axial position of blocks is determined. the block are clamped on shaft is rotated by a motor to check dynamic balance of the system. the system is provided with angular and longitudinal scales and is suspended with chains for dynamic balancing. experiments: 1. to balance the masses statically and dynamically of a single rotating mass system. 2. to observe the effect of unbalance in a rotating mass system. technical specification drive motor fhp motor, variable speed, with speed controller balancing weight 4 nos. of stainless steel with different sized eccentric mass for varying unbalance rotating shaft – material stainless steel 0.5 kw, 220v, single phase 01 i bar pendulum or compound pendulum 01 j rope brake dynamometer 01 k prony brake dynamometer 01 l whirling of shaft apparatus. the unit consists of a base upon which the bearing holders and driving motor and bearing can be fitted in a holders to end conditions of test shafts. a variac provides control of driving motor. the unit demonstrates the phenomenon of whirling of shafts with single rotor as the test is destructive after the test same shaft cannot be used again, hence the unit only demonstrates the principle. specifications: test shaft: 4.75 mm, 6.35 mm and 7.9 mm 2 each. bearing to provided end conditions, (a) both ends fixed, (b) one end fixed and one end free. drive motor 1/8 hp. 1500 rpm with control arrangement. the whole unit is mounted on a sturdy base. rotor for each shaft of suitable size. 01 m journal bearing test rig description: 01 the apparatus consists of a plain steel shaft excavated in a bearing and directly driven by a fhp motor. the bearing is freely supported on the shaft and sealed at the motor end. the speed of the motor is controlled by the speed control unit. manometer is mounted on bearing to measure the pressure at different position around the circumference. bearing is free to rotate and can be adjusted at any position of circular scale. the bearing can be loaded by attaching weights to the arm supported beneath it. technical details: journal : diameter 50 mm bearing : diameter 55 mm weights : 4 weights. motor : variable speed fhp motor control panel : for speed control of motor. oil recommended : sae 40 manometer : 16 tube manometer instruction manual : an english instruction manual will be provided along with the apparatus. the whole set up is well designed and arranged in a good quality painted structure. experimentation: to study the pressure profile of lubricating oil at various conditions of load and speed. plotting the cartesian polar pressure curves. 5 single cylinder four stroke petrol engine test rig the setup consists of single cylinder, four stroke, petrol engine connected to eddy current dynamometer for engine loading. the setup has stand‐alone type independent panel box consisting of air box, fuel tank, manometer, fuel measuring unit, digital speed indicator and digital temperature indicator. the setup enables study of engine for brake power, bmep, brake thermal efficiency, volumetric efficiency, specific fuel consumption, air fuel ratio and heat balance. provision is also made for conducting morse test. set up is supplied with ms excel program for engine performance analysis. self calculation and graphs sheets with excel programmings for comparison. solution tabs as reference for online diagnostics to problems. almost components from highly reputed mnc and international imports. self calibration/check techniques available specification: engine: make ‐honda, model ‐honda gx200d qx, type‐single cylinder, 4 stroke petrol, air cooled, 4.1 kw at 3600 rpm, stroke 54 mm, bore 68mm. capacity 196 cc dynamometer: type eddy current, water cooled propeller shaft: with universal joints air box: m s fabricated with orifice meter and manometer fuel tank: capacity 15 lit with glass fuel metering column rpm indicator: digital with non contact type speed sensor temperature sensor: type thermocouple, type k temperature indicator: digital, range 0‐1200 deg c load indicator: digital, range 0‐50 kg, supply 230vac load sensor: load cell, type strain gauge, range 0‐50 kg...
33380131 bids are invited for universal force table , jib crane , simply supported beam , friction slide apparatus with weight , simple screw jack with weight , differential axle and wheel and weight , worm and worm wheel , single purchase winch craft with weight , westonsdiffrential of wormed pulley block , doublepurchase winch craft with weight , slide caliper , outside caliper , inside caliper total quantity : 19...
33285442 bids are invited for universal force table , jib crane , simply supported beam , friction slide apparatus with weight , simple screw jack with weight , differential axle and wheel and weight , worm and worm wheel , single purchase winch craft with weight , westons diffrential of wormed pulley block , double purchase winch craft with weight , slide caliper , outside caliper , inside caliper...
33264649 provide of barge, pump, motor and electric equipment, centrifugal pump with motor, sluice valve, non return valve, air valve, ms pipe, vcb panel set, capacitor bank, cage strainer, soft starter, battery and battery charger, earthing, winch crab, pressure gauge, vacuum pump, high mast lighting system, chain pulley....
33016968 bids are invited for hemispherical sectional models of screw threads , hemispherical sectional models of screw threads nuts , standard bolt , bolts of four types , foundation bolts , foundation bolts with nomenclature , locking arrangement of bolts , rivetted joints wooden , screw jack apparatus with weights , bush bearing , plummer block or pedestal bearing , foot step bearing , flexible coupling , flanged coupling , stuffing box , connecting rod , spark plug , worm and worm wheel single with weights , worm and worm wheel double with weights , worm and worm wheel tripple with weights , wheel and differential axle 30 cm with weight , winch crab single purchase with weight , winch crab double purchase with weight , universal force table normal , moment of inertia of flywheel 25 cm with weights , parallel forces apparatus dial type 10 kg. balance , simply suported beam apparatus with weights , friction slide apparatus with weight , slip gauge complete set , vernier calliper , micrometer , sine bar complete set , vernier bevel protector , straight edge , gauge sets radius, thread , thread plug gauges set of 5 , plain plug gauges set of 5 , taper plug gauges set of 5 , thread micrometer , autocollimator , displacementmeasurement trainer module lvdt , electricalcomparator , pneumatic comparator , bevelprotector , profile projector surface plate 24 inch x 24inch , floating carriage micrometer , magnetic dialindicator with dial gauge , brinell cum rockwell hardnesstester sturdy , fatigue testing machine 200kg , impacttesting machine , torsion testing machine , clutch models , transmission system synchro mesh gear box actual cutsection , front drive line with differential gear assembly , rear drive line with differential gear assembly , 4 stroke 1cylinder diesel engine motor driven with valve timingattachment , 2 stroke 1 cylinder petrol engine motordriven actual cut section model , 4 stroke 1 cylinder petrolengine motor driven actual cut section model , fuelsupply system of a petrol engine carburator type actualcut section model1 / 46 total quantity : 81...
32952620 supply of procurement of wire ropes for old design of 140 ton craneprocurement of wire ropes for old design of 140 ton crane,main hoist wire rope (old design) wire rope of construction 35x7 (iwrc of special design, avoiding cross over between the strands of the core & reducing the danger of the internal rope destruction), compact strands, self lubricated, rotation resistant, d26x400m,rgg,langslay, un galvanized, 1960 n/mm2 , minimum breaking load 519.5 kn with accessories as per drg no. sk no. jmp/cr 184/03,alt.6, make: diepa/casar/usha martin , aux. hoist wire rope (old design) wire rope of construction 35x7 (iwrc of special design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction), compact strands, self lubricated, rotation resistant, d22x120m,rgg, langslay, un galvanized, 1960 n/mm2, minimum breaking load 373 kn with accessories as per drg no.. sk no.jmp/cr 185/03,alt.5 , make: diepa/casar/usha martin , derrick hoist wire rope (old design) wire rope (left) of construction 8x26 (iwrc) plastic impregnated, compact strand, self lubricated, a 26 x 130m, rgg/lgg, ordinary lay, un galvanised, 1770n/mm2 , minimum breaking load 504.7 kn with accessories as per drg no sk no.jmp/cr 186/03,alt.6, make: diepa/casar/usha martin. , derrick hoist wire rope (old design) wire rope (right) of construction 8x26 (iwrc) plastic impregnated, compact strand, self lubricated, a 26 x 130m, rgg/lgg, ordinary lay, un galvanised, 1770n/mm2 , minimum breaking load 504.7 kn with accessories as per drg no sk no.jmp/cr 186/03,alt.6, make: diepa/casar/usha martin. , recovery winch wire rope (old design) wire rope of construction 35x7 (iwrc of spl design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction), compact strands , self lubricated, rotation resistant, d16x70m,rgg, langslay, un galvanized, 1960 n/mm2 , min. breaking load 197.2 kn with accessories as per drg no . sk no.jmp/cr 187/0...
32847671 bids are invited for mechanical engineering lab ( q3 ) total quantity : 1 1 screw jack apparatus with weights 2 worm and worm wheel single with weights 3 worm and worm wheel double with weights 4 worm and worm wheel tripple with weights 5 wheel and differential axle 30 cm with weight 6 winch crab single purchase with weight 7 winch crab double purchase with weight 8 universal force table normal 9 moment of inertia of flywheel 25 cm with weights 10 parallel forces apparatus dial type 10 kg balance 11 simply suported beam apparatus with weights 12 friction slide apparatus with weight 13 14 thermal conductivity of metal rod apparatus heat transfer coefficient of composite wall apparatus 15 pin fin apparatus 16 natural convection heat transfer apparatus 17 forced convection heat transfer apparatus 18 emissivity measurement apparatus 19 stefan boltzmann’s constant apparatus 20 heat exchanger ( parallel flow and counter flow ) 21 critical heat flux apparatus 22 four bar chain mechanism 23 slide crank mechanism set of 3 24 slip & creep measurement apparatus 25 cam analysis machine 26 epicyclic gear train and torque holding apparatus 28 motorized governor apparatus 29 static & dynamic balancing apparatus. 30 bar pendulum or compound pendulum 31 rope brake dynamometer 32 prony brake dynamometer 33 whirling of shaft apparatus. 34 pelton turbine test rig 35 francis turbine test rig 36 kaplan turbine test rig 37 reciprocating pump test rig 38 two stage reciprocating air compressor 39 air blower apparatus 41 viscosity apparatus 40 jet impact apparatus...
32642582 comprehensive package policy cpm equipments comprehensive package policy cpm equipmentslike hydra, dozer and other construction equipment including locomotivesand wagons, tracks and bridges of mgr system and other earth movingequipment of brbcl station 1 brbcl loco 2 indian railyar wagon 3 indian railway loco 4 brake van 5 electric winch 6 electric winch 7 dozer 1 8 hydra 9 hydra 10 backhoe loader mark ii 11 dozer 2, 3 12 dozer 4 13 dozer 5 14 pay loader 1, 2 15 backhoe loader 16 fork lift 5 t 17 truck mounted hyd aerial platform 18 aerial working platform 19 fork lift 3t1 brbcl loco 2 indian railyar wagon 3 indian railway loco 4 brake van 5 track rail 6 bridge no 5 ( rob ) 7 bridge no 21 ( rub ) 8 bridge no 3 ( rub ) 9 bridge no 6a ( rob ) 10 bridge no 6 ( rob ) 11 fob=> limited...
31793698 procurement of spares for 12 ton escort hydra for ntpc kahalgaon , s 433:radiator , escort:soy2244.001:seal kit , escort:v19.43.093.0:head lamp assy lh , escort:y05.42.901.0:seat assy , escort:m302830:drain valve ( item 3to9 ) , c8000:unloader valve , escort:26c3091:winch rope , escort:86.02.60.1:wheel mounting bolt , c8000:compressor assly. , escort:v19.43.075.0:horn , escort:29966902:minor kit repair , escort:26925062a:starter motor , escort:v19.49.044.0:brake valve with tre , escort:29966901:major kit repair , c8000:filter element kit , escort:y01.47.02.0:suction strainer , escort:v19.45.048.1:hose , escort:v19.45.164.0:hose , c8000:clutch assy. , escort:v19.19.022.0:clutch pedal ssy , escort:29966507:wheel cylinder kit , escort:7200879:cradle base assy , escort:v19.29.031.1:stop cable , escort:f3569410:wheel bolt m22*2.5 , escort:t11.17.037.0:main ignition switch , escort:v16.42.013.0:hose , escort:v19.25.802.0:brake plate assy rh , escort:sdy2216.000:seal kit , escort:v19.32.802.1d:hydraulic pump , escort:sok2359.000:seal kit , c8000:water temp. gauge , c8000:oil pressure gauge , c8000:amp. meter , escort:360084:fan assembly ( 17” dia pulle , escort:2654408:filter throw away type , escort:spy 2026.001:filter element kit , escort:v19.45.049.1a:hose , escort:msp6 / 6:msp repair kit , escort:v19.45.127.2a:hose , escort:v19.45.189.0:hose , escort:7203513:hose , escort:v19.45.126.0a:hose , escort:v19.45.901.0:h.p.hose , escort:03.148.01.0:alternator , escort:v19.49.016.0:hose assy , escort:v19.49.049.0:hose assy. , escort:v19.45.056.1:h.p.hose , escort:v19.45.057.0:l.p.hose , escort:v19.45.101.0:hose , escort:y05.51.13.0a:hose , escort:v19.48.014.0:brake hose , escort:v16.54.801.0:hose , escort:v19.28.815.0:pin assy , escort:85.33.20.0:universal joint kit , escort:pp10659:rear axle assy. , escort:pp10795:wheel nut , c8000:locking washer , escort:193075:spline shaft , escort:85.40.05.0:bolt , c8000:spring washer , escort:n1.20x1.5:nut , escort:86.04.10.0:thrust washer , escort:v19.28.066.0:bush g.m , escort:86.04.21.0:washer , escort:86.04.12.1:castle nut , escort:p1.05.80:pin split , escort:85.33.901.2:pump coupling assy , escort:n1.08:hex nut 5 / 16unf , escort:w2.08:washer spring , escort:8mugf08h000:grub screw , escort:v19.45.106.0:h.p hose , c8000:grooved nut , c8000:slip joint , c8000:washer tab , c8000:dust cap , escort:v19.45.095.0a:h.p hose , c8000:yoke flange , c8000:pump , c8000:nut , c8000:washer...
31777685 procurement of omega make hydra pc16000 spare ntpc barauni procurement of omega make hydra pc16000 spare ntpc barauni , seal kit steering cylinder:ohj0081 , clutch plate:oe002300 , pressure plate:oe002500 , release bearing:obb06010t , pilot bearing:om12hd039 , master cylinder:ob014060 , winch assy.:owch000020 , brake hose:obh05500 , bush lift cylinder nylon:ohj02500 , bush steering jack nylon:om12bm004 , brake valve kit:owbk0033330 , seal kit lift cylinder:ohlw01200 , seal kit extn cylinder:ohew00200 , filter element:oht001660 , filter strainer:oht003101 , toggle switch:ol001700 , banjo bolt:ohb014000 , wire rope:owhh013670 , brake valve kit:owbk0033330 , brether filter:oht003001 , engine overhauling kit:oes21423678 , hydraulic pump:ohp001400 , suction hose:ohc024000 , unloader valve kit:obw053330 , lube oil filter:oes004415670 , h.p hose:ohh002500 , h.p hose:ohh003800 , cable stop:oe004400 , cable accelerator:oe113470 , cap fuel tank(with key):os011220 , o ring 0134736k: , oil seal for omega crane , ignition switch:ol001200...
31510558 supply of procurement of wire ropes for old design of 140 ton craneprocurement of wire ropes for old design of 140 ton crane,main hoist wire rope (old design) wire rope of construction 35x7 (iwrc of special design, avoiding cross over between the strands of the core & reducing the danger of the internal rope destruction), compact strands, self lubricated, rotation resistant, d26x400m,rgg,langslay, un galvanized, 1960 n/mm2 , minimum breaking load 519.5 kn with accessories as per drg no. sk no. jmp/cr 184/03,alt.6, make: diepa/casar/usha martin , aux. hoist wire rope (old design) wire rope of construction 35x7 (iwrc of special design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction), compact strands, self lubricated, rotation resistant, d22x120m,rgg, langslay, un galvanized, 1960 n/mm2, minimum breaking load 373 kn with accessories as per drg no.. sk no.jmp/cr 185/03,alt.5 , make: diepa/casar/usha martin , derrick hoist wire rope (old design) wire rope (left) of construction 8x26 (iwrc) plastic impregnated, compact strand, self lubricated, a 26 x 130m, rgg/lgg, ordinary lay, un galvanised, 1770n/mm2 , minimum breaking load 504.7 kn with accessories as per drg no sk no.jmp/cr 186/03,alt.6, make: diepa/casar/usha martin. , derrick hoist wire rope (old design) wire rope (right) of construction 8x26 (iwrc) plastic impregnated, compact strand, self lubricated, a 26 x 130m, rgg/lgg, ordinary lay, un galvanised, 1770n/mm2 , minimum breaking load 504.7 kn with accessories as per drg no sk no.jmp/cr 186/03,alt.6, make: diepa/casar/usha martin. , recovery winch wire rope (old design) wire rope of construction 35x7 (iwrc of spl design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction), compact strands , self lubricated, rotation resistant, d16x70m,rgg, langslay, un galvanized, 1960 n/mm2 , min. breaking load 197.2 kn with accessories as per drg no . sk no.jmp/cr 187/0...
31374363 tender for supply and installation of high mast lighting system specefication 2 supply of 12 m & 12.5 m high mast system with its accessories. mast shaft shall be innone/ two sections, hot dip galvanized and suitable for wind velocity as per is 875 part3. it shall also include accessories for high mast including head frame. steel wire rope 6mm dia (7/19 construction) double drum winch, galavanised latern carriage arrangement suitable for 6 luminaries symmetrically& its control gear boxes and lighting finial. the mast shall have an integral power tool installed inside the base compartment for its operation. supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templated. supply of zenith plus led flood light 150 w x 6 erection and commissioning of the high mast with the help of suitable equipments design and casting of suitable shallow roundation with m 15 concrete for the high mast considering the safe soil bearing capacity at site as 8 t/s sqmtr at 2 metre depthg.p. pipe earthing station for high mast (2 per mast is mandatory 1 for lighting and one for electrical) including cost of charkol, salt & cost of chamber, gi srip for connection & termination with structure. supply and laying of 16 sq, 4 core xlpe cable in a treanch from main power source 100 mtrs.)...
30458823 bids are invited for pile boring, providing and installation bored cast in situ reinforced cement concrete piles of grade m 25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using direct mud circulation ( dmc ) or bailer and chisel technique by tripod and mechanical winch machine all complete, including removal of excavated earth with all its lifts and leads ( length of pile for payment shall be measured up to bottom of pile cap ) .450mm dia piles ( inclusive of carriage ) , pcc providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering all work up to plinthlevel : 1:3:6 ( 1 cement : 3 coarse sand ( zone iii ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources ) ( inclusive of carriage ) , rcc providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland / portland slag cement, admixtures in recommended proportion as per is: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer in charge; for the following grades of concrete. note: extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re design the mix or bear the cost of extra cement. ( inclusive of carriage ) , brick work brick work with bricks of class designation 100a in foundations and plinthin :cement mortar 1:4 ( 1 cement : 4 coarse sand ) ( inclusive of carriage ) , sand filing supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. ( inclusive of carriage ) with lead upto 3 km , shuttering centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete , steel steel reinforcement for r.c.c. work ready to use cut and bend rebars of approved make from factory / workshop to construction site including placing in position and binding all complete thermo mechanically treated bars of grade fe 500d or more. , plinth protection making plinth protection 50mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand ( zone iii ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources ) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. , door & window providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, paneling and dash fasteners to be paid for separately ) :powder coated aluminium ( minimum thickness of powder coating 50 micron ) , glass providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) :with float glass panes of 5 mm thickness ( weight not less than 12.50 kg / sqm ) , upvc door providing and fixing of factory made upvc white colour casement door, upvc multichambered extruted frame, sash and mullion profile. frame duly reinforced with 1.2mm gi section box tpe chamber and sash with 1.5mm thick gi section ( ± 0.2mm ) based on wind load calculations ( shape and size according to upvc profiles ) , appropiate dimentions of upvc extruded glazing bead, epdm gasket ( k / o type ) , seperate drainage system, ss34 grade friction hinges 2d / 3d plate hinges, zinc alloy ( white powder coated ) casement handle, gi fastener 8x100 mm size for fixing frame to finish wall, plastic packer and caps and necessary steel screws etc.profile of frame and sash shall be metered cut and fusion welded at all corners, mullion shall be also fusion welded / joined mechanically including drilling of holes for fixing hardware and drainage of water etc. after fixing of frames , gap between frame and adjascent wall shall be filled with pu foaam / backer rod required size and the approved quantity. after that sealed with weather proof silicon sealant at both side, all complete as per approved drawing and direction of eic , door closer providing and fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ) , with necessary accessories and screws etc. complete. , door providing and fixing isi marked flush door shutters conforming to is : 2202 ( part i ) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including stainless steel butt hinges wirhnecessary screws , door stopper providing and fixing aluminium hanging floor door stopper, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour and shade, with necessary screws etc. complete. single rubber stopper , solling providing designation 100 a one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as perbuilding specification and direction of e / l, , tile 1 providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm , tile 2 providing and laying ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including pointing the joints with white cement and matching pigment etc., complete. , tile 3 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. , granite providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge :flamed finish granite stone slab jet black, cherry red, elitebrown, cat eye or equivalent. , false ceiling providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance ( rh ) of 99%, light reflectance ? 85%, thermal conductivity k = 0.052 0.057 w / m k, fire performance as per ( bs 476 pt 6 &7 ) in true horizontal level suspended on interlocking t grid of hot dipped all round galvanized iron section of 0.33 mm thick ( galvanized @120 gsm ) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item ( galvanised@80gsm ) 50 mm long 8mmouter diameter m 6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘t’ , pre fabsteel designing, providing, installing and fixing factory finished custom designed cold form light gauge steel framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. the steel sheet shall be galvanized ( az 150gms aluminium zinc alloy coated steel having minimum yield strength 300 550 mpa ) conforming to aisi specifications and ibc 2009 for cold formed steel framing and construction and also as per is: 875 1987, iso 800 1984 and is:801 1975. the wind load shall be as per provisions of is 875 ( part iii ) . lgsfs frame shall be designed as per is: 801 using commercially available software such as frame cad pro 11.7 / staad pro v8i / architekv2.5.16 / revit architecture 2011 or equivalent. proper usage of connection accessories like heavy duty tension ties, light duty hold ons, twist straps ( to connect truss with wall frames ) , strong tie, tie rod, h brackets, boxing sections, l shaped angles for better structural stability. the framing section shall be cold form c type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple / slot at required locations as per approved drawings. , pre fabwall providing and fixing of external wall system on light gauge steel frame work with outer face cement boards as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make. a groove of 2 mm to 3mm shall be maintained and grooves shall be sealed with silicon based sealant. the board shall be fixed in a staggered pattern. screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm and. internal face 12.5 mm thick gypsum plaster board fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. ( cost of frame work to be paid for separately ) outer face: outer face having 6mm thick fiber cement board fixed on 9mm thick fiber cement board, type a, as per is:14862:2000 ( high pressure steam cured ) inner face : 12.5 mm thick gypsum plaster board conforming to is 2095:2011 fixed on 8 mm thick fibre cement board confirming to is:14862:2000 of type b ( high pressure steam cured ) , pre fabin. wall providing and fixing internal wall panels on light gauge steel frame work with 12.5mm thick gypsum plaster board conforming is 2095:2011 fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make, screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. ( cost of frame work to be paid for separately , roof sheet supply & installation of precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by engineer in charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55mm ) with epdm seal or with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. , ridge plain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : ridges plain ( 500 600mm ) . , gutter drain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : gutter , flashing providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 5% total coated thickness ( tct ) , zinc coating 120gsm as per is: 277 in 240mpasteel grade, 5 7 microns epoxy primer on both side of the sheet and polyester topcoat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumenwashers complete :flashings / aprons. ( upto 600 mm ) , under deck insulation providing and fixing thermal insulation of ceiling ( under deck insulation ) with resin bonded rockwool conforming to is: 8183, density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to ceiling with metallic cleats ( 50x50x3 mm ) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. , resin bonded rock wool providing and fixing thermal insulation with resin bonded rock wool conforming to is: 8183, having density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to wall with screw, rawel plug & washers and held and in position by criss cossing gi wire etc. complete as per directions of engineerin charge. , face panel providing and fixing in all exterior face panels breathable vapour barrier underneath the cementfiber board as per national building code 2009 complete as per direction of engineer in charge. , lap siding supplying and installation of moisture resistant / fire resistantlap siding 8 mm thick and width as per standard sizes made ofiber cement board with embossed decorative finish to give pleasing exterior fixed horizontally with staggered joints including minimum over lapof 32 mm external cement fibre boardconforming to is 14862:2000 offixed with self drilling / taping screws / fastners of approved make. , putty providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distemper distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1 new work ( two or more coats ) over and including water tinnable priming coat with cement primer , ex. paint finishing walls with textured exterior paint of required shade : new work ( two or more coats applied @ 3.28 ltr / 10 sqm ) over and including priming coat of exterior primer applied @ 2.20kg / 10 sqm sqm , oil paint painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work . , steel 1 steel work in built up tubular ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. hot finished welded type tubes , excavation earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan ) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. , road providing and laying c.c. pavement of mix m 25 with ready mixed concrete from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc.complete as per specifications and directions of engineer in charge. ( the panel shuttering work shall be paid for separately ) . ( note: cement content considered in this item is @ 330 kg / cum. excess / less cement used as per design mix is payable / recoverableseparately ) . , paver block providing and laying 60 mm thick factory made cement concrete interlocking paver block of m 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thickcompacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer in charge. , phe 1 providing & fixing stone slab table rubbed, edges rounded and polished of size 75 x 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste 6mm nominal size ) as per engineer in charge and finished smooth white agaria marble stone , phe 2 providing and fixing salem stainless steel a isi 304 ( 18 / 8 ) kitchen sink as per is: 13983 with ci brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. kitchen sink with drain board510x1040mm bowl depth 200mm. , phe 4 providing and fixing mirror of superior glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing:rectangular shape 453x357 mm , phe 5 providing and fixing toilet paper holder:c.p. brass , phe 6 providing and fixing water closet squatting pan ( indian type w.c.pan ) with 100 mm sand cast iron p or s trap, 10 litre low fixturescomplete, including cutting and making good the walls andlevel whitep.v.c. flushing cistern, including flush pipe, with manually controlleddevice ( handle lever ) conforming to is : 7231, with all fittings andfloors wherever required :white vitreous china orissa pattern w.c. pan of size580x440 mm with integral type foot rests , phe 7 providing and fixing white vitreous china pedestal type water closet ( european type w.c. pan ) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device ( handle lever ) , conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : w.c. pan with isi marked white solid plastic seat and lid , phe 8 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer in charge , phe 9 providing and fixing cp brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge.. ( sink & urinal ) , phe 10 providing & fixingptmt towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealedfittings arrangement of approved quality and colour weighing not less than 88 gms , phe 11 providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms.15mm nominal bore , phe 12 providing and fixing c.p. brass bib cock of approved quality confirming to is:893115mm nominal bore , phe 13 providing and fixing c.p.brass angle valve for basin mixer and geyser points of approved quality conforming to is 8931 a ) 15 mm nominal bore.15 mm nominal bore , phe 14 providing and fixing wash bashin with c.i. brackets, 15mm dia cp brass singal hole basin mixer of approved quility and make, including painting of fittings and brackets, cutting and making good the walls wherever required white vitreous china surgeon type wash basin of size 660x460 mm with a pair of 15 mm c.p. brass pillar taps with elbow operated levers , phe 15 providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption ) , having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of engineer in charge.. , phe 16 providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. , phe 17 providing and fixing white vitreous china laboratory sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p brass waste and 40mm c.p. brass trap with necessary c.p. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :size 600x450x200 mm , phe 18 providing and fixing cp brass single lever telephonic wall mixer of quality & make as approved by engineer in charge . a ) 15 mm nominal dia. , phe 19 providing and fixing cp brass shower rose with 15 or 20 mm inlet100 mm diameter , phe 20 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. , phe 21 providing and fixing ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. , phe 22 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. ( internal work ) 40 mm dia, nominal bore , phe 23 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. ( internal work ) 50 mm dia, nominal bore , phe 24 two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand andmanufacturetwo more coast on new work , phe 25 p / f m.s. cap 100 mm dia , phe 26 providing and fixing, upvcpipes 6 kg / cm2 ( is: 4985 ) including all fittings ( plain or door ) e.g. bends, junction, offsets, access pieces, jointing with rubber ring / solvent cement joints includingrequired suports, cutting chase or holes in walls and floors and making good where required.75 mm dia pipe , phe 27 providing and fixing, upvcpipes 6 kg / cm2 ( is: 4985 ) including all fittings ( plain or door ) e.g. bends, junction, offsets, access pieces, jointing with rubber ring / solvent cement joints includingrequired suports, cutting chase or holes in walls and floors and making good where required.110 mm dia pipe , phe 28 providing & fixing on wall face unplasticised rigid pvc rain water pipes conforming to is:13592 tyape a included jointing with seal ring conforning to is:5382 leaving 10 mm gap for thermal expansion. ( i ) single socketed pipes.110 mm diameter , phe 29 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. coupler 110 mm diameter , phe 30 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. bend 87.5 deg 110 mm diameter , phe 31 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. shoe 110mm shoe , phe 32 providing & fixing unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50mm hard wood plugs, screwed with .m.s. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1cement : 4 coarse sand ) and making good the wall etc. complete.110 mm dia , phe 33 providing and fixing cpvc pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 20 mm nominal outer dia pipes , phe 34 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 25mm dia, nominal bore , phe 35 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 32 mm dia, nominal bore , phe 36 providing and fixing gun metal non return valve of approved quality ( pn 1.6 ) 40 nominal bore , phe 37 providing and fixing brass stop cock of approved quality15mm nominal bore , ex. phe 6 providing 250mm wide brick drain in cement mortar ( 1:6 ) with av. 150mm.clear depth and 250mm apron including cost of e / w. involved with 75mmcement concrete ( 1:4:8 ) over one brick designation 100 a flat soling inproper grade and slope at the base.the drain duly.plastered in cm. ( 1:3 ) with punning over exposed surface all complete as per buildingspecification and direction of e / l, , ex. phe 7 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil ( hard or soft ) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [ hard / dense soil ] pipes, cables etc.exceeding 80mm dia.but not exceeding 300mm dia. , ex. phe 8 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil ( hard or soft ) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [ hard / dense soil ] pipes, cables etc.exceeding 80mm dia. exceeding 300mm dia. , ex. phe 9 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 250 mm dia rcc pipe , ex. phe 10 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 300 mm dia rcc pipe , ex. phe 11 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 450 mm dia rcc pipe , ex. phe 12 inside size 120x90 cm and 90 cm deep including c.i. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg ) :with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , ex. phe 13 providing and fixing square mouth sw gully trap grade ‘a’ complete ci grating brick masonry chamber with bricks of class designation 75 and water tight ci cover with frame of 300 x 300 mm size ( inside ) the weight of cover to be not less than 13.00 kg and frame to be not less than 5 kg. as per standard design. ( cover min. 4.5 kg & frame min.2.7 kg ) 180x150 mm size p type with fps bricks , ex. phe 14 constructing masonry chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement:4 coarce sand ) for stop cock complete with c.i. surface box 100x100x75mm ( inside ) with locking arrangement and rcc top slab 1:2:4 mix ( 1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size ) necessary excavation foundation concret 1:5:10 ( 1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortor 1:3 ( 1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design. , ex. phe 15 constructing masonry chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement: 4 coarse sand ) for sluice valve, with c.i. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with channel lid and rcc top slab 1:2:4 mix ( 1 cement: 2 coarse sand: 4 graded stone sggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement: 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design:with f.p.s. bricks , ex. phe 16 structual steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , ex. phe 17 making connection of gi distribution branch with gi main of 50 80mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete. , rain water harvesting 1 boring / drilling bore well of required dia for casing / strainer pipe, bysuitable method prescribed in is:2800 ( part i ) , including collecting sample from different strata , preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , rain water harvesting 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , rain water harvesting 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150 mm nominal size dia , rain water harvesting 4 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 5 supplying, filling, spreading & levelling gravel of size range 5mm to 10mm, in recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 7 providing and fixing bail plug / bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 ( part i ) . 100 mm dia , rain water harvesting 8 making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , rain water harvesting 9 constructing soak pit 1.20x1.20x1.20 m filled with brickbats including s.w. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , tubewell 1 boring / drilling bore well of required dia for casing / strainer pipe, bysuitable method prescribed in is:2800 ( part i ) , including collecting sample from different strata , preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , tubewell 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , tubewell 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100mm nominal size dia , tubewell 4 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100 mm nominal size dia , tubewell 5 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , tubewell 6 providing and fixing bail plug / bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 ( part i ) . 100 mm dia , submersible pump 35m deep boring with casing and pipe. supply of pipe etc supplying & installation of suitable 2hp submersible pump b.s or k.s.bor equivalent make with finolex cable 1x3x2.5 squmm ( upto 50mtr ) withflexible conduit 25mm dia, electrical out door pannel with required electrical fitting such as mcb of 0 25amp ( havell or indocopp or mds make ) , volt & ampere meter ( ae make ) , single phase preventer ( minilac or vsp 1 make ) starter ( l&t or bch make ) etc of approved make, 40mm hdpe pipe ( 25 mtr ) and all accessories complete as per requirement of site. , water purifier and cooler 1 fitting and fixing single faucet storage type water cooler ( size 461 mm wide x 582 mm deep x 1217 mm height, weight 46 kg ) fully stainless body having storage capacity of 40 ltrs, cooling capacity of 40 ltrs. / hr. with hermetic type compressor, gas cooled motor equipped with over load protector, condensor for propeller type, thermostat autometically controlled temperature, refrigerent r 22, 230 volt, single phase 50 hertz, maximum current 2.3 amp including plug top and electrical lead wire connection upto 3 metres from the cooler, water inlet and drain out connections complete in all respects of voltas model no 40 / 40 tushar pss type or similar type of approved make. , water purifier and cooler 2 fitting and fixing water purifier for drinking purpose of capacity 6 litres / min, 5 purification system with reverse osmosis system with ultra ventilated membrane, tds500 to 2000 mgl / ppm, auto shut off with microswitch float manual flush facility, tds reduction 90% having automatic backwash system with filteration unit along with all accessories including plug top and electrical lead wire connection upto 3 metres from the purifier, water inlet and drain out connections complete in all respects similar to aquaguard or similar approved make ( model aquasure elegant ro water purifier of size width 360 mm x height 430 mm x depth 235 mm and weight 8.5 kg ) . , fire extinguisher 1 providing and fixing carbon di oxide type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. capacity 4.5 kg. , fire extinguisher 2 providing and fixing abc powder type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.capacity 6.0 kg. , electrical 1 wiring for light point / fan point / exhaust fan point / call bellpoint with 1.5 sq.mm frls pvc insulated copper conductorsingle core cable in surface / recessed steel conduit, withmodular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group c , electrical 2 wiring for twin control light point with 1.5 sq.mm frls pvcinsulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required. , electrical 3 wiring for group controlled ( looped ) light point / fan point / exhaust fan point / call bell point ( without independent switch etc. ) with 1.5 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, and earthing the point with 1.5 sq. mm frls pvc insulatedcopper conductor single core cable etc. as required. group c , pvc conduit 1 supplying and fixing of following sizes of medium class 20mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 2 supplying and fixing of following sizes of medium class 32mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 3 supplying and fixing of following sizes of medium class 50mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , electrical 4 wiring for light / power plug with 2x4 sq. mm frls pvcinsulated copper conductor single core cable in surface / recessed conduit alongwith 1 no. 4 sq. mm frls pvcinsulated copper conductor single core cable for loop earthingas required. , wiring frls pvc insulated copper conductor 1 2 x 2.5 sq. mm. + 1 x 2.5 sq. mm. earth wire , wiring frls pvc insulated copper conductor 2 2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire , wiring frls pvc insulated copper conductor 3 4 x 6 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 4 4 x 10 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 5 4 x 16 sq. mm + 2 x 16 sq. mm earth wire , s / f, gi box along with modular base & cover plate 1 or 2 module ( 75mm x 75mm ) , s / f, gi box along with modular base & cover plate 1 3 module ( 100mm x 75mm ) , s / f, gi box along with modular base & cover plate 2 4 module ( 125mmx75mm ) , s / f, gi box along with modular base & cover plate 3 6 module ( 200mm x 75mm ) , s / f, gi box along with modular base & cover plate 4 12 module ( 200mmx150mm ) , s / f modular switch / socket on the existing modular plate 5 / 6 amps switch , s / f modular switch / socket on the existing modular plate 2 15 / 16 amp switch , s / f modular switch / socket on the existing modular plate 3 3 pin 5 / 6 amp socket outlet , s / f modular switch / socket on the existing modular plate 4 6 pin 15 / 16 amp socket outlet , s / f modular switch / socket on the existing modular plate 5 telephone socket outlet , s / f modular switch / socket on the existing modular plate 6 tv antenna socket outlet , s / f modular switch / socket on the existing modular plate 7 bell push , electrical 5 supplying & fixing suitable size gi box wih modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, “c” curve including connections, painting etc. as required. ( for ac / geyser ) , electrical 6 supplying and drawing co axial tv cable rg 6 grade, 0.7 mm solid copper conductor pe insulated, shielded with fine tinned copper braid and protected with pvc sheath in the existing surface / recessed steel / pvc conduit as required. , electrical 7 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. , electrical 8 providing and fixing m.s. fan clamp type i or ii of 16 mm dia m.s. bar, bent to shape with hooked ends in r.c.c. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as required. , electrical 10 supplying and fixing 20 a, 240 v, spn industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 a c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. , electrical 11 supplying and fixing 20 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 12 supplying and fixing 30 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 13 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 8 way , double door , electrical 14 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 12 way , double door , electrical 15 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 16 way, double door , electrical 16 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 6 way ( 4 + 18 ) , double door , electrical 17 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 8 way ( 4 + 24 ) , double door , electrical 18 supplying and fixing of following ways surface / recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs ( but without mcbs and incomer ) as required . ( note : vertical type mcb tpdb is normally usedwhere 3 phase outlets are required. ) 4 way ( 4 + 12 ) , double door , 40 a, rccb supplying and fixing following rating, double pole, ( single phase and neutral ) , 240 v, residual current circuit breaker ( rccb ) , having a sensitivity current 30 ma in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a mcb supplying and fixing 40 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 40 tp mcb , single pole mcb supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 63a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 100a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , l / f pvc sheathed / xlpe power cable in trench laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 95 sq. mm and upto 185 sq. mm , l / f pvc sheathed / xlpe power cable in trench 1 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm , l / f pvc sheathed / xlpe power cable over cable tray upto 35 sq. mm ( clamped with 1mm thick saddle ) , l / f pvc sheathed / xlpe power cable over cable tray 2 above 35 sq. mm and upto 95 sq. mm ( clamped with 25x3mm ms flat clamp ) , l / f pvc sheathed / xlpe power cable over cable tray 3 above 95 sq. mm and upto 185 sq. mm ( clamped with 25 / 40x3mm ms flat clamp ) , l / f pvc sheathed / xlpe power cable over cable tray 4 above 185 sq. mm and upto 400 sq. mm ( clamped with 40x3mm ms flat clamp ) , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3.5c x 300 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 1 3.5c x 240 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 2 3.5c x 120 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3 3.5c x 95 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 4 3.5c x 50 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 5 4c x 35 sqmm aluminium conductor cable a2xfy , cable tray supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 100 mm width x 50 mm depth x 1.6 mm thickness , cable tray 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 300 mm width x 50 mm depth x 1.6 mm thickness , cable tray 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 600 mm width x 62.5 mm depth x 2.0 mm thickness , cable tray “bends” supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.100 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.150 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.300 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 3 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.450 mm width x 50 mm depth x 2 mm thickness , cable tray “bends” 4 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.600 mm width x 62.5 mm depth x 2.0 mm thickness , mv cable supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 300 sqmm, aluminium conductor cable a2xfy , mv cable 1 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 240 sqmm, aluminium conductor cable a2xfy , mv cable 2 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 120 sqmm, aluminium conductor cable a2xfy , mv cable 3 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 95 sqmm, aluminium conductor cable a2xfy , earthing earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required. , earthing 1 earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. , earthing 2 earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. , earthing 3 providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required. , earthing 4 providing and fixing 25 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required. , earthing 5 providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required. , earthing 6 providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for connections etc. as required. , fiting & fixtures 1 supply and installation of regular / standard model a.c. ceiling fan of 1400 mm sweep including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq. mm fr pvc insulated copper conductor etc as required. , fiting & fixtures 2 supplying and fixing single wall mounted 18 / 22 watt led type batten fitting complete with electronic driver and led tube etc directly on wall / ceiling includingconnections with 1.5 sq.mm fr pvc insulated copper conductor and earthing the body etc. as required. , fiting & fixtures 3 supply installation and comissioning ofintegrated batten made ( 2ft ) of ultra slim co extruded polycarbonate channel with housing part in white finish & diffuser part in reeded opal finish.white finish abs end caps with decorative circular coloured polycarbonate cap snap fitted on the end cap to enhance the aesthetic of the fixture. these end caps are snap fitted to the fixture.high efficiency long life led with lumen efficacy of 130 lm / w with viewing angle of 120º.powered by an integral isolated low thd electronic led driver ( smps based constant current supply ) with output short circuit protection, surge protection.can be fixed directly into the wall / ceiling by means of mounting ss clips provided with the fixture. ip 20, lumen output of 950 lumens with system efficacy of > 105lm / w .cri >80, color temperature 6500k, thd <20% and pf>0.95, ip20 . life class of 35, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz;internal surge protection:3 kv; protection including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. : reverse polarity, open & short circuit. driver safety requirement standards :is 15885 2 13, test report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source. cat ref havells :lumilinebs9wled840spcwh or approved equivalent. , fiting & fixtures 4 supplying and fixing recess mounted 12 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 5 supplying and fixing recess mounted 18 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 6 supply, installation, testing and commissioning of 400 mm sweep, 65w, blade material aluminium blades , speed & oscillation 3 speed, pull cord for speed and oscillation.air delivery minimum 72 m³ / min, speed minimun 1350 revolution per minute.suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. , fiting & fixtures 7 supply installation and comissioning of 28w 2x2 panel recess mounting luminaire with high performance leds, suitable for mounting with armstrong / grid ceiling.crca powder coated white after phosphochromate treatment.high efficiency long life led package in integral module with lumen efficacy of >100 lm / w and viewing angle of 120° to ensure better uniformity.powered by an independent isolated, selv output electronic led driver ( smps based constant current supply ) with output short circuit protection, surge protection & other reliability test. lumen output of 3450 lumens.cri >80, color temperature 5700k, thd <10% and pf >0.95, ip20, ik03.life class of 50, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz;internal surge protection:3 kv; protection including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. : reverse polarity, open & short circuit. driver safety requirement standards :is 15885 2 13, test report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source.cat ref havells :venusneohe2x2plr128wled857 or approved equivalent. , fiting & fixtures 8 supplying installation testing & commissioning ofb22 based 9w led 3 star bulb with 850 lumen, 6k color temperature including holder. , fiting & fixtures 9 supplying installation testing & commissioning of black painted extruded aluminium housing. green / red led’s mounted inside the housing. laser engraved signage matter on single / double acrylic sheet fixed on one side suitable for wall / ceiling / suspension type single / double sided display. in double sided version black paper is inserted. ni cd battery back up to 2 hrs. ( charged up to 8 10 hrs ) .mounting strings provided for pendent mounting operating voltage 150 280v ac ambient operating temperature. – 0 to 450c ingress protection – ip42.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. 220208 besl 03 led ssd wbb green 240 3 8wor220209 besl 03 led ssd wbb red 240 3 8wor220210 besl 03 led dsd wbb green 240 3 8wor220211 besl 03 led dsd wbb red 240 3 8w , fiting & fixtures 10 supply, installation, testing & erecting of ip66 bulkhead surface type lighting fixture 10w made up of pressure die cast aluminium housing and polyster powder coated die cast aluminium with high quality polycarbonate diffuser in opal finish for glare free light distribution.high efficiency long life led module with smd led package mounted on mcpcb with lumen efficacy of >95 lm / w with system lumen 950. powered by integral electronic led driver with apfc with low thd output short / open circuit protection. cct 5700, cri>80, system efficacy>90lm / w, thd<15%, pf>.95, ip66, ik 10, life class of 50, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. cat ref: havells : hexaft10wled857ssymbopc or approved equivalent. , civil & misc works1 providing and fixing m.v. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works2 providing and fixing h.t. danger notice plate of 250 mm x 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works3 supplying and making cable route marker with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm x 60 cm at the bottom and 50 cm x 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. , civil & misc works4 supplying and fixing cable route marker with 10 cm x 10 cm x 5 mm thick g.i. plate with inscription there on, bolted / welded to 35 mm x 35 mm x 6 mm angle iron, 60 cm long and fixing the same in ground as required. , civil & misc works5 providing & fixing in position 1000 mm wide , electrical insulating rubber mats as per is 15652:2006, 2 mm thick, suitable up to 1.1 kv , fire retardant, no effect of acids, alkalis and transformer oils, moisture proof, high tensile strengthandtexture finish / cloth impression ( anti slip , marking on top ) , civil & misc works6 supply & fixing shock treatment chart duly mounted on a wooden frame with 5 mm thick glass as required ( approx front area 1.20 sq metre ) , 40 kvaups supplying, installation, testing and commissioningof online double conversion fully microprocessor based , indoor type, compact ups system of following rating with igbt based pwm technology to achieve thd < 3% and input power factor of greater than 0.95 at 50% loading, suitable for three phase ac input voltage 380 v to 440 v, 50 hz +3% / 3 % and three phase ac output voltage 415 ± 1% volts & frequency 50 ± 0.5 hz , inbuilt isolation transformer, necessary vrla batteries of suitable size having 30 minutes back up time , mounting rack including and suitable size connecting cable ( for ups to battery and battery to battery ) , static and maintenance bypass switch, snmp card for rs232 / ethernet ip computability for operation and monitoring etc. with all components as mentioned , specifications, complete as required.note : concerning vendor needs to furnish the battery sizing calculations at the time of ga approval and battery size has to be as per the approved ga drawing. , external lighting 1 supply and erection of 4 metre height hot dipgalvanized octagonal street light pole with followingarm with top dia 70 mm and bottom dia a / f 130 mm, made of 3 mm thick sheet along with base plate of size220 x 220 x 12 mm , small door opening for junctionbox mounting with mcb & connector, cement concreteof 1:3:6 including excavation, refilling and suitable sizefoundation bolts with template and all complete jobasrequired. ( but without pole collar ) single arm , external lighting 2 supplying and fixing 40 / 45 watt led type street lightwith die cast aluminium housing for ingress protectionof ip65 and complete with all accessories etc, onpole / building including connection with fr pvcinsulated copper conductor cable and earthing thebody etc. as required. , ip based cctv system 1 sitc of 2 megapixel @ 25fps, h.265 ip bullet camera, 1 / 2.9 cmos with 2.8~12mm varifocal lens, 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 2 sitc of 2 megapixel @ 25fps, h.265 ip dome camera, 1 / 2.9 cmos with 3.6 fixed mm 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 3 sitc of 2 megapixel @ 25fps, ptz camera h.265 ip dome camera, 1 / 2.9 cmos with 2.6 fixed lenslux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 4 sitc of 32ch 4k ivr , h.265 / h.264 • 1080p real time • 4k display • dual lan • 8x hdd • raid •web plugin free h.265 / h.264 compression technology 4k display for clear monitoring up to 1080p 16ch decoding ability smart search ii smart vca event searchsupport raid 0, 1, 5 supported to prevent from recording data loss browsers supported: ie , smart functions : target count, electric fence, face detection, humaniod detection, retrograde detection, leave position detectio output, local & network backup etc. complete as required. , cctv 5 sitc of harddiskdrive8tb, 24 / 7surveillance category only complete etc as required.etc.all complete , cctv 6 sitc of 55 led narrow bazel for monitoring for nvr server etc. all complete. , cctv 7 sitc of rj 45 outlets near the cameras etc. all complete. etc. all complete. , cctv 8 sitc of cat 6 patch cords 1 meter high quality four pair twisted stranded cable terminated with rj45 modular plugs at both the ends. , signage 1 providing & fixing of building direction signage mounted on pole, with pole of 100x100mm shs ( square hollow section ) of height of 5600mm, and sign size of 900x1050, sign made of aluminiu c section of 60mm with internal framing to support the frame in ms tubes hollow section, frame work duly painted with anti rust coatings, with facia of 3mm thick exterior grade aluminium composite panel, cladded with uv cured digital printed retroreflective sheet of 3m make, and back panel of 3mm exterior grade acp, all pipes to be painted in approved color. cost shall includecost towards installation, including excuvation and filling up with specified pcc and fixing of foundation bolts as specified, also it shall include the designing charges.all complete as per direction by engineer in charge. , signage 4 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge , wall projected 250x210mm, both sides , signage 5 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge, door mounted, 300x80mm , 2 tr air conditioning 1 split ac ( inverter model ) : supply, installation, testing, commissioning of split type wall mounted air conditioning units of following capacity including inddor, outdoor unit fitted with inverter based rotary compressor fitted with rotary compressor, copper condensor and first charge refrigent r410a / eco friendly green gas only, all complete including all electrical connections to the electrical power supply system of the building, includingbut not limited to supply of all electrical plugs, etc., as necessary, lengthening of all electrical wires of ac units ( both indoor and outdoor ) , drain pipe andincluding suitable voltage stabilisers, etc. so as to place them in a concealed manner in the desired position. the copper pipes and electrical cables shall be concealed in approved manner and neatly run in straight lines in a workman like manner with proper supports. complete supply and installation of split2 tr star rating 3 star , refrigerant piping copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 25 mm od, wall thickness >= 1.2 mm ( insulation 19 mm thick ) , refrigerant piping 1 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 19.1 mm od, wall thickness >= 1.0 mm ( insulation 13 mm thick ) , refrigerant piping 2 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 15.9 mm od, wall thickness >= 0.8 mm ( insulation 13 mm thick ) , refrigerant piping 3 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 9.5 mm od, wall thickness >= 0.8 mm ( insulation 13 mm thick ) , drain piping providing and fixing of cpvc 6 kg / cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 20 mm , drain piping 1 providing and fixing of cpvc 6 kg / cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 32 mm , main oxygen manifold supply, installation, testing and commissioning of following gas manifold system ( excluding cylinders ) . the manifold is configured for designed numbers of cylinders and is suitable to withstand a pressure of 145 kg / cm2, along withhigh pressure copper annealed tail pipes with end brass adapter suitable for cylinders and manifold. top frame comprising of high pressure copper pipes of size 1 / 2” nb x 15swg with high pressure brass fittings made of high tensile brass and connections through nonreturn valves, the design of middle and bottomframes is provided to fit both round and flat bottom cylinders safely. the manifold is tested ( hydraulically ) at 3500 psig. ( it should be ce and iso 13485 certified ) mani fold oxygen manifold 6 + 6 cylinder banks complete with nrv, middle frame, bottom frame with ce marked, , emergency manifold emergency oxygen manifold 01 + 01 cylinder emergency manifold with complete regulator, nrv, middle frame & bottom frame, , control panelfor oxygen fully automatic three port control panel for oxygen supply, installation, testing and commissioning of automatic manifold control panel would provide a duty or standby gas supply from two cylinder banks with automaticchangeover the manifold indicates local status and has a remote indicator facility. automaticmanifold control panel would be designed to supply the mgps with a constant pressure supply via a control panel form two equal banks of cylinders and the changeover from the ‘duty’ to the ‘standby’ bank of cylinders would beautomatic. automatic changeover from the duty to the standby bank would occur at a cylinder pressure that will ensure the maximum usage of the contents of the duty bank. the changeover unit would be provided with monitoring todetect and display: duty bank operating, duty bank empty, standby bank operating, and standby bank below 10 % when the duty bank is empty, reserve bank low, pipeline pressure fault. there would be facility to connect liquidoxygen supply ( i.e. three port control panel ) ( it should be ce and iso 13485 certified ) fully automatic three port control panel for oxygen , emergency manifold line regulator emergency manifold line regulator supply, installation, testing and commissioning of emergency manifold line regulator i n p u t p r e s s u r e 1 5 0 k g / c m 2 working pressure 4 kg / cm2 it should be ce and iso 13485 certified.oxygen input pressure 150 kg / cm2 working pressure 4 kg / cm2capacity : 1500 lpm , cylinderconnectingpipe ( pig tail ) supply, installation, testing and commissioning of cylinder connecting pipe ( pig tail ) made up of flexible ss hose with safety cord 5 / 8 inch bsp gland nut and one side 1 / 2 inch bsp internal threads having one meter length. ( oxygen 24 , n2o 10, co2 4 ) , backpressurecompensated [ bpc ] oxygen flowmeter supply, installation, testing and commissioning of back pressure compensated [ bpc ] oxygen flow meter body should be made of brass material dully chrome plated and graduated from 0 15 l / m on an expanded lower scale forprecision setting at low flow and 5 15 l / m for general use. the humidifier bottle should be made up of unbreakable polycarbonate / polysulphone material and autoclavable at 121 degree centigrade temperature. it should be ceand iso 13485 certified. , oxygen gas outletfront loadeddin / bsstd gas outlet front loaded din / bs std:supply, installation, testing and commissioning of din / british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din / british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din / bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , medical air ( 4 bar ) outletfront loadeddin / bsstd gas outlet front loaded din / bs std:supply, installation, testing and commissioning of din / british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din / british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din / bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , quickconnectadapter din / british standard quick connect oxygen adapter ( safety probe ) , tube oxygen h.p. rubber tube white color, , alarm supply, installation, testing and commissioningof area pressure alarm panel would be witdigital display, closed circuit, self monitoringtype. the alarm would be designed to monitorthe line pressure in piping systems.it should be ce and iso 13485 certified. withfour digit notified no. area line pressure alarm 1 gases , isolation valve, supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified.42mm , isolation valve 2 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 28mm , isolation valve 3 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 22mm , isolation valve 4 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 15mm , isolation valve 5 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 12mm , pipeline 1 medical grade copper pipeline ( in mtrs. ) as per en 13348, 12 mm ( od ) x 0.7 mm thickness , pipeline 2 medical grade copper pipeline ( in mtrs. ) as per en 13348, 15 mm ( od ) x 0.9 mm thickness , pipeline 3 medical grade copper pipeline ( in mtrs. ) as per en 13348, 22 mm ( od ) x 0.9 mm thickness , pipeline 4 medical grade copper pipeline ( in mtrs. ) as per en 13348, 28 mm ( od ) x 0.9 mm thickness , pipeline 5 medical grade copper pipeline ( in mtrs. ) as per en 13348, 42 mm ( od ) x 1.2 mm thickness , hospital sheet patient bedtype iii with mattress overall sizes: ( l ) 2268 mm x ( w ) 922 mm x ( h ) 610 mmdescription: sheet bed should be a plain bed used in the recovery ward.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board / leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral whiteperformance specifications: maximum patient load should be 135 kgthickness mattress: 3+sandwitchconstruction: round corners yeshitlon thickness ( mm ) : 60hitlondensity ( gm / dcm3 ) : 23coir ( both side ) thicknessmm: 20density ( gm / dcm3 ) : 70, drc ( % ) : 22quilting combination / layers:pilled foam – quilting ( one side ) thicknessmm 14pilled foam density gm / dcm3 18pu foam / epe sheet side walling thicknessmm 3total mattress thickness mm 87rexine ( gsm ) : 150note: * finish product thickness should be measure from outer to outer surface. tolerance +5 mm , paediatric bed with mattress paediatric bed of overall sizes in mm: 1500 ( l ) x 850 ( w ) x 1210 ( h ) flat single section bed with grille frame on 4 sides.suitable for children up to 12 years.drop down grill frame on both sides for protection of the patient.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board / leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral white , bed side locker type i over all dimension :402mmlx422mm wx840mm ht .locker should have one cabinet and one drawer unit .both provided with cam lock .there should be gap between drawer and unit to keep general items for frequesnt use castors are provided for easy handling .drawer made up of crca sheet 1 mm thick and has ball slide for easy operation .top ss 304 sheet 0.8 mm thick castors 50 mmdia , hamdle abs ..powder coating of epoxy polyester , medicinetrolleytype i overall size902mm ( l ) x532mm ( w ) x915mm ( h ) .top shelf should be made of ss 304 sheetof 1 mm thick. supporting legs made of ss304 tubesection 30.30 mm dia.of 1.2 mm thick provided to suppoort the entire structure.ss 304 tube provided at the bottom for placement of instument being used .handle made up of ss 304 tubeof dia dia 16 mmand thickness 1.2 mm provided to handle trolley .and maneuver accordingly. high endurance anti static plastic injection moulded castors of 125 mm dia.ss should be finished in glossy mirror finish. max load capacity of 10 kg / shelf udl , round stooltype i overall sizes diagonal legdia 538 mmh470 min 655max.ss 202 made sheet with spin section of thickness 1mm & should be non corrosive. it should have a diameter of 305mm, seat base is made of ms ring and rectangular tube.en8 screw having dia of 22 mm should be used for height adjustment of the seat base.the hub should be made of ms erw tube having dia of 38mm and thickness 2 mm.the hub should be welded with the legs and it should accommodate and cover the lead screw mechanism.the understructure should consist of 4 legs made up ofms erw tube of diameter 25.4 mm and 1.6mm thick. the press formed pipe leg should give a round & clean look. all the legs should be provided with 4 nos of nylon 6 bush.all metal componentsshould be pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbialepoxy polyster powder coating . all welding should be co2 argon welding to minimise rusting on the welding areas.safe working load must be 135kg , strecher on trolley type i 2005mm ( l ) x666mm ( w ) x827mm ( h ) .the trolley should be made of 31.75 and 25.4 mm dia 1.6 mm thick erw tube.holder for stretcher should be made up of mild steel.castor should be of 200 mm dia , diagonal locking castor.stretcher should be made up oferw tubeof dia 25.4 mm and thickness 1.6 mm.top sheet should be made of crca sheetof thickness 1.2 mm with contour shape to accommodate patient.iv pole holder should be made ofms .maximum safe work load should be 135 kg.to ensure qood quality welding co2 argonprocess should be adhered to.all metal componentsshould be pre treated with zinc phosphating in 9 tank porcess and then powder coated with anti microbialepoxy polyster powder coating.goods should be supplied in knocked down construction to reduce carbon emission. performance test :proof loading test , cycle tests , impact test, salt spray test, castor break test, the manufacturer should compilant with iso 9001, 14001, 13485, ohsas 1800 and ce certification. , doctor desk type x s / f / f executive table main desk should be of dimesion : 1350w x 750d x 750h.the table top should bein white cedar, side panelsin black, while the modestypanel ina combination of black & white cedar. side panels : ( black ) made form 18mm thick plt with pvc lipping.modesty panel : made form 18mm thick plt with pvc lipping. bigger upper panel in black and smaller lower panel in white cedar. made from 18mm thick plt with pvc lipping. mobile pedestal : one box and one filing drawer with 18mm thick plb fronts and top. handles : black powder coated die cast aluminum alloy handles. mobile pedestal and hdu are fitted with central lock. , chair type iii s / f / f executive chair1 ) seat / back assembly: the seat and back are made up of 1.2 cm. thick hot pressed plywood, upholstered withfabric upholstery covers and moulded polyurethane foam. the back foam is designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area.high back size : 47.5 cm ( w ) x 69.5 cm ( h ) seat size : 47.0 cm. ( w ) x 48.0 cm. ( d ) 2 ) polyurethane foam: the polyurethane foam is moulded with density = 45 + / 2 kg / m 3and hardness = 20 + / 2at 25% compression. 3 ) armrests: the one piece armrests are injection moulded from black co polymer polypropylene. 4 ) center tilt synchro mechanism : the mechanism is designed with the following features:• 360 revolving type. • upright position locking. • tilt tension adjustment.• seat / back tilting ratio of 1:3 ( 60 seat tilt / 180 back tilt ) . 5 ) pneumatic height adjustment : the pneumatic height adjustment has anadjustment stroke of 12.0 cm. 6 ) telescopic bellow assembly : the bellow is 3 piece telescopic type and injection moulded in black polypropylene. 7 ) pedestal assembly : . , staff / visitor chair type i chair of over all size: 58.0cm ( w ) x 56.5cm ( d ) x 87.5cm ( h ) & 48.0cm ( sh ) seat / back assembly: the seat and back are made from chemically treated and seasoned wood, upholstered with plywood, black leather cloth, and u foam.*back size: 46.0cm ( w ) x 27.0cm ( h ) .*seat size: 46.0cm ( w ) x 40.0cm ( d ) .armrest tube: the armrest tube is made of m.s. e.r.w. tube dia. 2.54cm. ( 1” ) x 16bg thick and powder coated.armrest: the armrest is gas assisted injection moulded from black polypropylene.understructure assembly: the understructure assembly is a cantilever type frame made of dia. 2.54cm. ( 1” ) x 14bg. thick m.s. e.r.w. tube and powder coated. , wheel chair type i ( l ) 790 x ( w ) 600 x ( h ) 870mm.foldable frame structure should be made of section 22diax1.2mm a3 carbon steel with chrome finish. cross bar should be made of a3 carbon steel with section 25.4 x 1.2mm.rear wheel:24 inch solid mag wheels with alloy in the rim .integrated handrim provide to drive the wheel chair of section 16x1.2mm a3 carbon steel with chrome finish.front wheel :8 inch hub made of pa polymer and outer with solid rubber.pu molded arm rest & base should be made of abs for better arm support .leatherite strap for calf rest & leatherite cushion for seat.adjustable alluminimum die cast foot rest with updown & swivel type mechanism.handles should be made of moulded rubber grip to push the wheelchair.hand brakes should be provided to lock the wheelchair at desired location.foot pressextended base with molded plastic for better grip.anti rust chrome finsh. safe work load of100 kg , basin stand type i ht 850 mm ss bowl ms tubular frame of dia 25.4 x1.2 mm tube work mounted on three 50 dia.non rusting castors all without brack. ss part finished with matt polish , kick buckettype i overa all dimension of the bucket should be 517 mm ( l ) x 517 mm ( w ) x 210 mm h.it should made of 12.7 mm dia and 1.6 mm thick ss 304 ring. the bowl should be ss made of .8 mm thck .3 nos 50 mm diahigh endurance plasticinjection moulded castors should be provided for the movement.mx load bearing capacity should be 10 kg. , hospital curtain tracks & i.v. tree system supply installation testing & commissioning of cubical tracks system made of powder coated aluminium alloy, stain free polyster fabric , water repellent curtains , smooth movement , non sticking runnner with stainless steel hooks made from mirror finish stainless steel , adjustable height with all accessories. total quantity : 1...
30458807 bids are invited for pile boring, providing and installation bored cast in situ reinforced cement concrete piles of grade m 25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using direct mud circulation ( dmc ) or bailer and chisel technique by tripod and mechanical winch machine all complete, including removal of excavated earth with all its lifts and leads ( length of pile for payment shall be measured up to bottom of pile cap ) .450mm dia piles ( inclusive of carriage ) , pcc providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering all work up to plinthlevel : 1:3:6 ( 1 cement : 3 coarse sand ( zone iii ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources ) ( inclusive of carriage ) , rcc providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland / portland slag cement, admixtures in recommended proportion as per is: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer in charge; for the following grades of concrete. note: extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re design the mix or bear the cost of extra cement. ( inclusive of carriage ) , brick work brick work with bricks of class designation 100a in foundations and plinthin :cement mortar 1:4 ( 1 cement : 4 coarse sand ) ( inclusive of carriage ) , sand filing supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. ( inclusive of carriage ) with lead upto 3 km , shuttering centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete , steel steel reinforcement for r.c.c. work ready to use cut and bend rebars of approved make from factory / workshop to construction site including placing in position and binding all complete thermo mechanically treated bars of grade fe 500d or more. , plinth protection making plinth protection 50mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand ( zone iii ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources ) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. , door & window providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, paneling and dash fasteners to be paid for separately ) :powder coated aluminium ( minimum thickness of powder coating 50 micron ) , glass providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) :with float glass panes of 5 mm thickness ( weight not less than 12.50 kg / sqm ) , upvc door providing and fixing of factory made upvc white colour casement door, upvc multichambered extruted frame, sash and mullion profile. frame duly reinforced with 1.2mm gi section box tpe chamber and sash with 1.5mm thick gi section ( ± 0.2mm ) based on wind load calculations ( shape and size according to upvc profiles ) , appropiate dimentions of upvc extruded glazing bead, epdm gasket ( k / o type ) , seperate drainage system, ss34 grade friction hinges 2d / 3d plate hinges, zinc alloy ( white powder coated ) casement handle, gi fastener 8x100 mm size for fixing frame to finish wall, plastic packer and caps and necessary steel screws etc.profile of frame and sash shall be metered cut and fusion welded at all corners, mullion shall be also fusion welded / joined mechanically including drilling of holes for fixing hardware and drainage of water etc. after fixing of frames , gap between frame and adjascent wall shall be filled with pu foaam / backer rod required size and the approved quantity. after that sealed with weather proof silicon sealant at both side, all complete as per approved drawing and direction of eic , door closer providing and fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ) , with necessary accessories and screws etc. complete. , door providing and fixing isi marked flush door shutters conforming to is : 2202 ( part i ) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including stainless steel butt hinges wirhnecessary screws , door stopper providing and fixing aluminium hanging floor door stopper, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour and shade, with necessary screws etc. complete. single rubber stopper , solling providing designation 100 a one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as perbuilding specification and direction of e / l, , tile 1 providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm , tile 2 providing and laying ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including pointing the joints with white cement and matching pigment etc., complete. , tile 3 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. , granite providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge :flamed finish granite stone slab jet black, cherry red, elitebrown, cat eye or equivalent. , false ceiling providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance ( rh ) of 99%, light reflectance ? 85%, thermal conductivity k = 0.052 0.057 w / m k, fire performance as per ( bs 476 pt 6 &7 ) in true horizontal level suspended on interlocking t grid of hot dipped all round galvanized iron section of 0.33 mm thick ( galvanized @120 gsm ) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item ( galvanised@80gsm ) 50 mm long 8mmouter diameter m 6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘t’ , pre fabsteel designing, providing, installing and fixing factory finished custom designed cold form light gauge steel framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. the steel sheet shall be galvanized ( az 150gms aluminium zinc alloy coated steel having minimum yield strength 300 550 mpa ) conforming to aisi specifications and ibc 2009 for cold formed steel framing and construction and also as per is: 875 1987, iso 800 1984 and is:801 1975. the wind load shall be as per provisions of is 875 ( part iii ) . lgsfs frame shall be designed as per is: 801 using commercially available software such as frame cad pro 11.7 / staad pro v8i / architekv2.5.16 / revit architecture 2011 or equivalent. proper usage of connection accessories like heavy duty tension ties, light duty hold ons, twist straps ( to connect truss with wall frames ) , strong tie, tie rod, h brackets, boxing sections, l shaped angles for better structural stability. the framing section shall be cold form c type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple / slot at required locations as per approved drawings. , pre fabwall providing and fixing of external wall system on light gauge steel frame work with outer face cement boards as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make. a groove of 2 mm to 3mm shall be maintained and grooves shall be sealed with silicon based sealant. the board shall be fixed in a staggered pattern. screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm and. internal face 12.5 mm thick gypsum plaster board fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. ( cost of frame work to be paid for separately ) outer face: outer face having 6mm thick fiber cement board fixed on 9mm thick fiber cement board, type a, as per is:14862:2000 ( high pressure steam cured ) inner face : 12.5 mm thick gypsum plaster board conforming to is 2095:2011 fixed on 8 mm thick fibre cement board confirming to is:14862:2000 of type b ( high pressure steam cured ) , pre fabin. wall providing and fixing internal wall panels on light gauge steel frame work with 12.5mm thick gypsum plaster board conforming is 2095:2011 fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make, screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. ( cost of frame work to be paid for separately , roof sheet supply & installation of precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by engineer in charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55mm ) with epdm seal or with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. , ridge plain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : ridges plain ( 500 600mm ) . , gutter drain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : gutter , flashing providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 5% total coated thickness ( tct ) , zinc coating 120gsm as per is: 277 in 240mpasteel grade, 5 7 microns epoxy primer on both side of the sheet and polyester topcoat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumenwashers complete :flashings / aprons. ( upto 600 mm ) , under deck insulation providing and fixing thermal insulation of ceiling ( under deck insulation ) with resin bonded rockwool conforming to is: 8183, density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to ceiling with metallic cleats ( 50x50x3 mm ) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. , resin bonded rock wool providing and fixing thermal insulation with resin bonded rock wool conforming to is: 8183, having density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to wall with screw, rawel plug & washers and held and in position by criss cossing gi wire etc. complete as per directions of engineerin charge. , face panel providing and fixing in all exterior face panels breathable vapour barrier underneath the cementfiber board as per national building code 2009 complete as per direction of engineer in charge. , lap siding supplying and installation of moisture resistant / fire resistantlap siding 8 mm thick and width as per standard sizes made ofiber cement board with embossed decorative finish to give pleasing exterior fixed horizontally with staggered joints including minimum over lapof 32 mm external cement fibre boardconforming to is 14862:2000 offixed with self drilling / taping screws / fastners of approved make. , putty providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distemper distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1 new work ( two or more coats ) over and including water tinnable priming coat with cement primer , ex. paint finishing walls with textured exterior paint of required shade : new work ( two or more coats applied @ 3.28 ltr / 10 sqm ) over and including priming coat of exterior primer applied @ 2.20kg / 10 sqm sqm , oil paint painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work . , steel 1 steel work in built up tubular ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. hot finished welded type tubes , excavation earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan ) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. , road providing and laying c.c. pavement of mix m 25 with ready mixed concrete from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc.complete as per specifications and directions of engineer in charge. ( the panel shuttering work shall be paid for separately ) . ( note: cement content considered in this item is @ 330 kg / cum. excess / less cement used as per design mix is payable / recoverableseparately ) . , paver block providing and laying 60 mm thick factory made cement concrete interlocking paver block of m 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thickcompacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer in charge. , phe 1 providing & fixing stone slab table rubbed, edges rounded and polished of size 75 x 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste 6mm nominal size ) as per engineer in charge and finished smooth white agaria marble stone , phe 2 providing and fixing salem stainless steel a isi 304 ( 18 / 8 ) kitchen sink as per is: 13983 with ci brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. kitchen sink with drain board510x1040mm bowl depth 200mm. , phe 4 providing and fixing mirror of superior glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing:rectangular shape 453x357 mm , phe 5 providing and fixing toilet paper holder:c.p. brass , phe 6 providing and fixing water closet squatting pan ( indian type w.c.pan ) with 100 mm sand cast iron p or s trap, 10 litre low fixturescomplete, including cutting and making good the walls andlevel whitep.v.c. flushing cistern, including flush pipe, with manually controlleddevice ( handle lever ) conforming to is : 7231, with all fittings andfloors wherever required :white vitreous china orissa pattern w.c. pan of size580x440 mm with integral type foot rests , phe 7 providing and fixing white vitreous china pedestal type water closet ( european type w.c. pan ) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device ( handle lever ) , conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : w.c. pan with isi marked white solid plastic seat and lid , phe 8 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer in charge , phe 9 providing and fixing cp brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge.. ( sink & urinal ) , phe 10 providing & fixingptmt towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealedfittings arrangement of approved quality and colour weighing not less than 88 gms , phe 11 providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms.15mm nominal bore , phe 12 providing and fixing c.p. brass bib cock of approved quality confirming to is:893115mm nominal bore , phe 13 providing and fixing c.p.brass angle valve for basin mixer and geyser points of approved quality conforming to is 8931 a ) 15 mm nominal bore.15 mm nominal bore , phe 14 providing and fixing wash bashin with c.i. brackets, 15mm dia cp brass singal hole basin mixer of approved quility and make, including painting of fittings and brackets, cutting and making good the walls wherever required white vitreous china surgeon type wash basin of size 660x460 mm with a pair of 15 mm c.p. brass pillar taps with elbow operated levers , phe 15 providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption ) , having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of engineer in charge.. , phe 16 providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. , phe 17 providing and fixing white vitreous china laboratory sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p brass waste and 40mm c.p. brass trap with necessary c.p. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :size 600x450x200 mm , phe 18 providing and fixing cp brass single lever telephonic wall mixer of quality & make as approved by engineer in charge . a ) 15 mm nominal dia. , phe 19 providing and fixing cp brass shower rose with 15 or 20 mm inlet100 mm diameter , phe 20 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. , phe 21 providing and fixing ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. , phe 22 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. ( internal work ) 40 mm dia, nominal bore , phe 23 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. ( internal work ) 50 mm dia, nominal bore , phe 24 two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand andmanufacturetwo more coast on new work , phe 25 p / f m.s. cap 100 mm dia , phe 26 providing and fixing, upvcpipes 6 kg / cm2 ( is: 4985 ) including all fittings ( plain or door ) e.g. bends, junction, offsets, access pieces, jointing with rubber ring / solvent cement joints includingrequired suports, cutting chase or holes in walls and floors and making good where required.75 mm dia pipe , phe 27 providing and fixing, upvcpipes 6 kg / cm2 ( is: 4985 ) including all fittings ( plain or door ) e.g. bends, junction, offsets, access pieces, jointing with rubber ring / solvent cement joints includingrequired suports, cutting chase or holes in walls and floors and making good where required.110 mm dia pipe , phe 28 providing & fixing on wall face unplasticised rigid pvc rain water pipes conforming to is:13592 tyape a included jointing with seal ring conforning to is:5382 leaving 10 mm gap for thermal expansion. ( i ) single socketed pipes.110 mm diameter , phe 29 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. coupler 110 mm diameter , phe 30 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. bend 87.5 deg 110 mm diameter , phe 31 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. shoe 110mm shoe , phe 32 providing & fixing unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50mm hard wood plugs, screwed with .m.s. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1cement : 4 coarse sand ) and making good the wall etc. complete.110 mm dia , phe 33 providing and fixing cpvc pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 20 mm nominal outer dia pipes , phe 34 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 25mm dia, nominal bore , phe 35 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 32 mm dia, nominal bore , phe 36 providing and fixing gun metal non return valve of approved quality ( pn 1.6 ) 40 nominal bore , phe 37 providing and fixing brass stop cock of approved quality15mm nominal bore , ex. phe 6 providing 250mm wide brick drain in cement mortar ( 1:6 ) with av. 150mm.clear depth and 250mm apron including cost of e / w. involved with 75mmcement concrete ( 1:4:8 ) over one brick designation 100 a flat soling inproper grade and slope at the base.the drain duly.plastered in cm. ( 1:3 ) with punning over exposed surface all complete as per buildingspecification and direction of e / l, , ex. phe 7 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil ( hard or soft ) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [ hard / dense soil ] pipes, cables etc.exceeding 80mm dia.but not exceeding 300mm dia. , ex. phe 8 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil ( hard or soft ) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [ hard / dense soil ] pipes, cables etc.exceeding 80mm dia. exceeding 300mm dia. , ex. phe 9 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 250 mm dia rcc pipe , ex. phe 10 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 300 mm dia rcc pipe , ex. phe 11 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 450 mm dia rcc pipe , ex. phe 12 inside size 120x90 cm and 90 cm deep including c.i. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg ) :with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , ex. phe 13 providing and fixing square mouth sw gully trap grade ‘a’ complete ci grating brick masonry chamber with bricks of class designation 75 and water tight ci cover with frame of 300 x 300 mm size ( inside ) the weight of cover to be not less than 13.00 kg and frame to be not less than 5 kg. as per standard design. ( cover min. 4.5 kg & frame min.2.7 kg ) 180x150 mm size p type with fps bricks , ex. phe 14 constructing masonry chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement:4 coarce sand ) for stop cock complete with c.i. surface box 100x100x75mm ( inside ) with locking arrangement and rcc top slab 1:2:4 mix ( 1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size ) necessary excavation foundation concret 1:5:10 ( 1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortor 1:3 ( 1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design. , ex. phe 15 constructing masonry chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement: 4 coarse sand ) for sluice valve, with c.i. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with channel lid and rcc top slab 1:2:4 mix ( 1 cement: 2 coarse sand: 4 graded stone sggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement: 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design:with f.p.s. bricks , ex. phe 16 structual steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , ex. phe 17 making connection of gi distribution branch with gi main of 50 80mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete. , rain water harvesting 1 boring / drilling bore well of required dia for casing / strainer pipe, bysuitable method prescribed in is:2800 ( part i ) , including collecting sample from different strata , preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , rain water harvesting 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , rain water harvesting 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150 mm nominal size dia , rain water harvesting 4 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 5 supplying, filling, spreading & levelling gravel of size range 5mm to 10mm, in recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 7 providing and fixing bail plug / bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 ( part i ) . 100 mm dia , rain water harvesting 8 making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , rain water harvesting 9 constructing soak pit 1.20x1.20x1.20 m filled with brickbats including s.w. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , tubewell 1 boring / drilling bore well of required dia for casing / strainer pipe, bysuitable method prescribed in is:2800 ( part i ) , including collecting sample from different strata , preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , tubewell 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , tubewell 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100mm nominal size dia , tubewell 4 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100 mm nominal size dia , tubewell 5 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , tubewell 6 providing and fixing bail plug / bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 ( part i ) . 100 mm dia , submersible pump 35m deep boring with casing and pipe. supply of pipe etc supplying & installation of suitable 2hp submersible pump b.s or k.s.bor equivalent make with finolex cable 1x3x2.5 squmm ( upto 50mtr ) withflexible conduit 25mm dia, electrical out door pannel with required electrical fitting such as mcb of 0 25amp ( havell or indocopp or mds make ) , volt & ampere meter ( ae make ) , single phase preventer ( minilac or vsp 1 make ) starter ( l&t or bch make ) etc of approved make, 40mm hdpe pipe ( 25 mtr ) and all accessories complete as per requirement of site. , water purifier and cooler 1 fitting and fixing single faucet storage type water cooler ( size 461 mm wide x 582 mm deep x 1217 mm height, weight 46 kg ) fully stainless body having storage capacity of 40 ltrs, cooling capacity of 40 ltrs. / hr. with hermetic type compressor, gas cooled motor equipped with over load protector, condensor for propeller type, thermostat autometically controlled temperature, refrigerent r 22, 230 volt, single phase 50 hertz, maximum current 2.3 amp including plug top and electrical lead wire connection upto 3 metres from the cooler, water inlet and drain out connections complete in all respects of voltas model no 40 / 40 tushar pss type or similar type of approved make. , water purifier and cooler 2 fitting and fixing water purifier for drinking purpose of capacity 6 litres / min, 5 purification system with reverse osmosis system with ultra ventilated membrane, tds500 to 2000 mgl / ppm, auto shut off with microswitch float manual flush facility, tds reduction 90% having automatic backwash system with filteration unit along with all accessories including plug top and electrical lead wire connection upto 3 metres from the purifier, water inlet and drain out connections complete in all respects similar to aquaguard or similar approved make ( model aquasure elegant ro water purifier of size width 360 mm x height 430 mm x depth 235 mm and weight 8.5 kg ) . , fire extinguisher 1 providing and fixing carbon di oxide type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. capacity 4.5 kg. , fire extinguisher 2 providing and fixing abc powder type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.capacity 6.0 kg. , electrical 1 wiring for light point / fan point / exhaust fan point / call bellpoint with 1.5 sq.mm frls pvc insulated copper conductorsingle core cable in surface / recessed steel conduit, withmodular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group c , electrical 2 wiring for twin control light point with 1.5 sq.mm frls pvcinsulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required. , electrical 3 wiring for group controlled ( looped ) light point / fan point / exhaust fan point / call bell point ( without independent switch etc. ) with 1.5 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, and earthing the point with 1.5 sq. mm frls pvc insulatedcopper conductor single core cable etc. as required. group c , pvc conduit 1 supplying and fixing of following sizes of medium class 20mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 2 supplying and fixing of following sizes of medium class 32mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 3 supplying and fixing of following sizes of medium class 50mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , electrical 4 wiring for light / power plug with 2x4 sq. mm frls pvcinsulated copper conductor single core cable in surface / recessed conduit alongwith 1 no. 4 sq. mm frls pvcinsulated copper conductor single core cable for loop earthingas required. , wiring frls pvc insulated copper conductor 1 2 x 2.5 sq. mm. + 1 x 2.5 sq. mm. earth wire , wiring frls pvc insulated copper conductor 2 2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire , wiring frls pvc insulated copper conductor 3 4 x 6 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 4 4 x 10 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 5 4 x 16 sq. mm + 2 x 16 sq. mm earth wire , s / f, gi box along with modular base & cover plate 1 or 2 module ( 75mm x 75mm ) , s / f, gi box along with modular base & cover plate 1 3 module ( 100mm x 75mm ) , s / f, gi box along with modular base & cover plate 2 4 module ( 125mmx75mm ) , s / f, gi box along with modular base & cover plate 3 6 module ( 200mm x 75mm ) , s / f, gi box along with modular base & cover plate 4 12 module ( 200mmx150mm ) , s / f modular switch / socket on the existing modular plate 5 / 6 amps switch , s / f modular switch / socket on the existing modular plate 2 15 / 16 amp switch , s / f modular switch / socket on the existing modular plate 3 3 pin 5 / 6 amp socket outlet , s / f modular switch / socket on the existing modular plate 4 6 pin 15 / 16 amp socket outlet , s / f modular switch / socket on the existing modular plate 5 telephone socket outlet , s / f modular switch / socket on the existing modular plate 6 tv antenna socket outlet , s / f modular switch / socket on the existing modular plate 7 bell push , electrical 5 supplying & fixing suitable size gi box wih modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, “c” curve including connections, painting etc. as required. ( for ac / geyser ) , electrical 6 supplying and drawing co axial tv cable rg 6 grade, 0.7 mm solid copper conductor pe insulated, shielded with fine tinned copper braid and protected with pvc sheath in the existing surface / recessed steel / pvc conduit as required. , electrical 7 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. , electrical 8 providing and fixing m.s. fan clamp type i or ii of 16 mm dia m.s. bar, bent to shape with hooked ends in r.c.c. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as required. , electrical 10 supplying and fixing 20 a, 240 v, spn industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 a c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. , electrical 11 supplying and fixing 20 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 12 supplying and fixing 30 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 13 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 8 way , double door , electrical 14 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 12 way , double door , electrical 15 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 16 way, double door , electrical 16 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 6 way ( 4 + 18 ) , double door , electrical 17 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 8 way ( 4 + 24 ) , double door , electrical 18 supplying and fixing of following ways surface / recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs ( but without mcbs and incomer ) as required . ( note : vertical type mcb tpdb is normally usedwhere 3 phase outlets are required. ) 4 way ( 4 + 12 ) , double door , 40 a, rccb supplying and fixing following rating, double pole, ( single phase and neutral ) , 240 v, residual current circuit breaker ( rccb ) , having a sensitivity current 30 ma in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a mcb supplying and fixing 40 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 40 tp mcb , single pole mcb supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 63a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 100a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , l / f pvc sheathed / xlpe power cable in trench laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 95 sq. mm and upto 185 sq. mm , l / f pvc sheathed / xlpe power cable in trench 1 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm , l / f pvc sheathed / xlpe power cable over cable tray upto 35 sq. mm ( clamped with 1mm thick saddle ) , l / f pvc sheathed / xlpe power cable over cable tray 2 above 35 sq. mm and upto 95 sq. mm ( clamped with 25x3mm ms flat clamp ) , l / f pvc sheathed / xlpe power cable over cable tray 3 above 95 sq. mm and upto 185 sq. mm ( clamped with 25 / 40x3mm ms flat clamp ) , l / f pvc sheathed / xlpe power cable over cable tray 4 above 185 sq. mm and upto 400 sq. mm ( clamped with 40x3mm ms flat clamp ) , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3.5c x 300 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 1 3.5c x 240 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 2 3.5c x 120 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3 3.5c x 95 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 4 3.5c x 50 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 5 4c x 35 sqmm aluminium conductor cable a2xfy , cable tray supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 100 mm width x 50 mm depth x 1.6 mm thickness , cable tray 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 300 mm width x 50 mm depth x 1.6 mm thickness , cable tray 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 600 mm width x 62.5 mm depth x 2.0 mm thickness , cable tray “bends” supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.100 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.150 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.300 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 3 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.450 mm width x 50 mm depth x 2 mm thickness , cable tray “bends” 4 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.600 mm width x 62.5 mm depth x 2.0 mm thickness , mv cable supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 300 sqmm, aluminium conductor cable a2xfy , mv cable 1 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 240 sqmm, aluminium conductor cable a2xfy , mv cable 2 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 120 sqmm, aluminium conductor cable a2xfy , mv cable 3 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 95 sqmm, aluminium conductor cable a2xfy , earthing earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required. , earthing 1 earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. , earthing 2 earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. , earthing 3 providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required. , earthing 4 providing and fixing 25 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required. , earthing 5 providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required. , earthing 6 providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for connections etc. as required. , fiting & fixtures 1 supply and installation of regular / standard model a.c. ceiling fan of 1400 mm sweep including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq. mm fr pvc insulated copper conductor etc as required. , fiting & fixtures 2 supplying and fixing single wall mounted 18 / 22 watt led type batten fitting complete with electronic driver and led tube etc directly on wall / ceiling includingconnections with 1.5 sq.mm fr pvc insulated copper conductor and earthing the body etc. as required. , fiting & fixtures 3 supply installation and comissioning ofintegrated batten made ( 2ft ) of ultra slim co extruded polycarbonate channel with housing part in white finish & diffuser part in reeded opal finish.white finish abs end caps with decorative circular coloured polycarbonate cap snap fitted on the end cap to enhance the aesthetic of the fixture. these end caps are snap fitted to the fixture.high efficiency long life led with lumen efficacy of 130 lm / w with viewing angle of 120º.powered by an integral isolated low thd electronic led driver ( smps based constant current supply ) with output short circuit protection, surge protection.can be fixed directly into the wall / ceiling by means of mounting ss clips provided with the fixture. ip 20, lumen output of 950 lumens with system efficacy of > 105lm / w .cri >80, color temperature 6500k, thd <20% and pf>0.95, ip20 . life class of 35, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz;internal surge protection:3 kv; protection including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. : reverse polarity, open & short circuit. driver safety requirement standards :is 15885 2 13, test report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source. cat ref havells :lumilinebs9wled840spcwh or approved equivalent. , fiting & fixtures 4 supplying and fixing recess mounted 12 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 5 supplying and fixing recess mounted 18 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 6 supply, installation, testing and commissioning of 400 mm sweep, 65w, blade material aluminium blades , speed & oscillation 3 speed, pull cord for speed and oscillation.air delivery minimum 72 m³ / min, speed minimun 1350 revolution per minute.suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. , fiting & fixtures 7 supply installation and comissioning of 28w 2x2 panel recess mounting luminaire with high performance leds, suitable for mounting with armstrong / grid ceiling.crca powder coated white after phosphochromate treatment.high efficiency long life led package in integral module with lumen efficacy of >100 lm / w and viewing angle of 120° to ensure better uniformity.powered by an independent isolated, selv output electronic led driver ( smps based constant current supply ) with output short circuit protection, surge protection & other reliability test. lumen output of 3450 lumens.cri >80, color temperature 5700k, thd <10% and pf >0.95, ip20, ik03.life class of 50, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz;internal surge protection:3 kv; protection including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. : reverse polarity, open & short circuit. driver safety requirement standards :is 15885 2 13, test report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source.cat ref havells :venusneohe2x2plr128wled857 or approved equivalent. , fiting & fixtures 8 supplying installation testing & commissioning ofb22 based 9w led 3 star bulb with 850 lumen, 6k color temperature including holder. , fiting & fixtures 9 supplying installation testing & commissioning of black painted extruded aluminium housing. green / red led’s mounted inside the housing. laser engraved signage matter on single / double acrylic sheet fixed on one side suitable for wall / ceiling / suspension type single / double sided display. in double sided version black paper is inserted. ni cd battery back up to 2 hrs. ( charged up to 8 10 hrs ) .mounting strings provided for pendent mounting operating voltage 150 280v ac ambient operating temperature. – 0 to 450c ingress protection – ip42.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. 220208 besl 03 led ssd wbb green 240 3 8wor220209 besl 03 led ssd wbb red 240 3 8wor220210 besl 03 led dsd wbb green 240 3 8wor220211 besl 03 led dsd wbb red 240 3 8w , fiting & fixtures 10 supply, installation, testing & erecting of ip66 bulkhead surface type lighting fixture 10w made up of pressure die cast aluminium housing and polyster powder coated die cast aluminium with high quality polycarbonate diffuser in opal finish for glare free light distribution.high efficiency long life led module with smd led package mounted on mcpcb with lumen efficacy of >95 lm / w with system lumen 950. powered by integral electronic led driver with apfc with low thd output short / open circuit protection. cct 5700, cri>80, system efficacy>90lm / w, thd<15%, pf>.95, ip66, ik 10, life class of 50, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. cat ref: havells : hexaft10wled857ssymbopc or approved equivalent. , civil & misc works1 providing and fixing m.v. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works2 providing and fixing h.t. danger notice plate of 250 mm x 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works3 supplying and making cable route marker with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm x 60 cm at the bottom and 50 cm x 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. , civil & misc works4 supplying and fixing cable route marker with 10 cm x 10 cm x 5 mm thick g.i. plate with inscription there on, bolted / welded to 35 mm x 35 mm x 6 mm angle iron, 60 cm long and fixing the same in ground as required. , civil & misc works5 providing & fixing in position 1000 mm wide , electrical insulating rubber mats as per is 15652:2006, 2 mm thick, suitable up to 1.1 kv , fire retardant, no effect of acids, alkalis and transformer oils, moisture proof, high tensile strengthandtexture finish / cloth impression ( anti slip , marking on top ) , civil & misc works6 supply & fixing shock treatment chart duly mounted on a wooden frame with 5 mm thick glass as required ( approx front area 1.20 sq metre ) , 40 kvaups supplying, installation, testing and commissioningof online double conversion fully microprocessor based , indoor type, compact ups system of following rating with igbt based pwm technology to achieve thd < 3% and input power factor of greater than 0.95 at 50% loading, suitable for three phase ac input voltage 380 v to 440 v, 50 hz +3% / 3 % and three phase ac output voltage 415 ± 1% volts & frequency 50 ± 0.5 hz , inbuilt isolation transformer, necessary vrla batteries of suitable size having 30 minutes back up time , mounting rack including and suitable size connecting cable ( for ups to battery and battery to battery ) , static and maintenance bypass switch, snmp card for rs232 / ethernet ip computability for operation and monitoring etc. with all components as mentioned , specifications, complete as required.note : concerning vendor needs to furnish the battery sizing calculations at the time of ga approval and battery size has to be as per the approved ga drawing. , external lighting 1 supply and erection of 4 metre height hot dipgalvanized octagonal street light pole with followingarm with top dia 70 mm and bottom dia a / f 130 mm, made of 3 mm thick sheet along with base plate of size220 x 220 x 12 mm , small door opening for junctionbox mounting with mcb & connector, cement concreteof 1:3:6 including excavation, refilling and suitable sizefoundation bolts with template and all complete jobasrequired. ( but without pole collar ) single arm , external lighting 2 supplying and fixing 40 / 45 watt led type street lightwith die cast aluminium housing for ingress protectionof ip65 and complete with all accessories etc, onpole / building including connection with fr pvcinsulated copper conductor cable and earthing thebody etc. as required. , ip based cctv system 1 sitc of 2 megapixel @ 25fps, h.265 ip bullet camera, 1 / 2.9 cmos with 2.8~12mm varifocal lens, 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 2 sitc of 2 megapixel @ 25fps, h.265 ip dome camera, 1 / 2.9 cmos with 3.6 fixed mm 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 3 sitc of 2 megapixel @ 25fps, ptz camera h.265 ip dome camera, 1 / 2.9 cmos with 2.6 fixed lenslux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 4 sitc of 32ch 4k ivr , h.265 / h.264 • 1080p real time • 4k display • dual lan • 8x hdd • raid •web plugin free h.265 / h.264 compression technology 4k display for clear monitoring up to 1080p 16ch decoding ability smart search ii smart vca event searchsupport raid 0, 1, 5 supported to prevent from recording data loss browsers supported: ie , smart functions : target count, electric fence, face detection, humaniod detection, retrograde detection, leave position detectio output, local & network backup etc. complete as required. , cctv 5 sitc of harddiskdrive8tb, 24 / 7surveillance category only complete etc as required.etc.all complete , cctv 6 sitc of 55 led narrow bazel for monitoring for nvr server etc. all complete. , cctv 7 sitc of rj 45 outlets near the cameras etc. all complete. etc. all complete. , cctv 8 sitc of cat 6 patch cords 1 meter high quality four pair twisted stranded cable terminated with rj45 modular plugs at both the ends. , signage 1 providing & fixing of building direction signage mounted on pole, with pole of 100x100mm shs ( square hollow section ) of height of 5600mm, and sign size of 900x1050, sign made of aluminiu c section of 60mm with internal framing to support the frame in ms tubes hollow section, frame work duly painted with anti rust coatings, with facia of 3mm thick exterior grade aluminium composite panel, cladded with uv cured digital printed retroreflective sheet of 3m make, and back panel of 3mm exterior grade acp, all pipes to be painted in approved color. cost shall includecost towards installation, including excuvation and filling up with specified pcc and fixing of foundation bolts as specified, also it shall include the designing charges.all complete as per direction by engineer in charge. , signage 4 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge , wall projected 250x210mm, both sides , signage 5 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge, door mounted, 300x80mm , 2 tr air conditioning 1 split ac ( inverter model ) : supply, installation, testing, commissioning of split type wall mounted air conditioning units of following capacity including inddor, outdoor unit fitted with inverter based rotary compressor fitted with rotary compressor, copper condensor and first charge refrigent r410a / eco friendly green gas only, all complete including all electrical connections to the electrical power supply system of the building, includingbut not limited to supply of all electrical plugs, etc., as necessary, lengthening of all electrical wires of ac units ( both indoor and outdoor ) , drain pipe andincluding suitable voltage stabilisers, etc. so as to place them in a concealed manner in the desired position. the copper pipes and electrical cables shall be concealed in approved manner and neatly run in straight lines in a workman like manner with proper supports. complete supply and installation of split2 tr star rating 3 star , refrigerant piping copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 25 mm od, wall thickness >= 1.2 mm ( insulation 19 mm thick ) , refrigerant piping 1 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 19.1 mm od, wall thickness >= 1.0 mm ( insulation 13 mm thick ) , refrigerant piping 2 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 15.9 mm od, wall thickness >= 0.8 mm ( insulation 13 mm thick ) , refrigerant piping 3 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 9.5 mm od, wall thickness >= 0.8 mm ( insulation 13 mm thick ) , drain piping providing and fixing of cpvc 6 kg / cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 20 mm , drain piping 1 providing and fixing of cpvc 6 kg / cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 32 mm , main oxygen manifold supply, installation, testing and commissioning of following gas manifold system ( excluding cylinders ) . the manifold is configured for designed numbers of cylinders and is suitable to withstand a pressure of 145 kg / cm2, along withhigh pressure copper annealed tail pipes with end brass adapter suitable for cylinders and manifold. top frame comprising of high pressure copper pipes of size 1 / 2” nb x 15swg with high pressure brass fittings made of high tensile brass and connections through nonreturn valves, the design of middle and bottomframes is provided to fit both round and flat bottom cylinders safely. the manifold is tested ( hydraulically ) at 3500 psig. ( it should be ce and iso 13485 certified ) mani fold oxygen manifold 6 + 6 cylinder banks complete with nrv, middle frame, bottom frame with ce marked, , emergency manifold emergency oxygen manifold 01 + 01 cylinder emergency manifold with complete regulator, nrv, middle frame & bottom frame, , control panelfor oxygen fully automatic three port control panel for oxygen supply, installation, testing and commissioning of automatic manifold control panel would provide a duty or standby gas supply from two cylinder banks with automaticchangeover the manifold indicates local status and has a remote indicator facility. automaticmanifold control panel would be designed to supply the mgps with a constant pressure supply via a control panel form two equal banks of cylinders and the changeover from the ‘duty’ to the ‘standby’ bank of cylinders would beautomatic. automatic changeover from the duty to the standby bank would occur at a cylinder pressure that will ensure the maximum usage of the contents of the duty bank. the changeover unit would be provided with monitoring todetect and display: duty bank operating, duty bank empty, standby bank operating, and standby bank below 10 % when the duty bank is empty, reserve bank low, pipeline pressure fault. there would be facility to connect liquidoxygen supply ( i.e. three port control panel ) ( it should be ce and iso 13485 certified ) fully automatic three port control panel for oxygen , emergency manifold line regulator emergency manifold line regulator supply, installation, testing and commissioning of emergency manifold line regulator i n p u t p r e s s u r e 1 5 0 k g / c m 2 working pressure 4 kg / cm2 it should be ce and iso 13485 certified.oxygen input pressure 150 kg / cm2 working pressure 4 kg / cm2capacity : 1500 lpm , cylinderconnectingpipe ( pig tail ) supply, installation, testing and commissioning of cylinder connecting pipe ( pig tail ) made up of flexible ss hose with safety cord 5 / 8 inch bsp gland nut and one side 1 / 2 inch bsp internal threads having one meter length. ( oxygen 24 , n2o 10, co2 4 ) , backpressurecompensated [ bpc ] oxygen flowmeter supply, installation, testing and commissioning of back pressure compensated [ bpc ] oxygen flow meter body should be made of brass material dully chrome plated and graduated from 0 15 l / m on an expanded lower scale forprecision setting at low flow and 5 15 l / m for general use. the humidifier bottle should be made up of unbreakable polycarbonate / polysulphone material and autoclavable at 121 degree centigrade temperature. it should be ceand iso 13485 certified. , oxygen gas outletfront loadeddin / bsstd gas outlet front loaded din / bs std:supply, installation, testing and commissioning of din / british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din / british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din / bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , medical air ( 4 bar ) outletfront loadeddin / bsstd gas outlet front loaded din / bs std:supply, installation, testing and commissioning of din / british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din / british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din / bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , quickconnectadapter din / british standard quick connect oxygen adapter ( safety probe ) , tube oxygen h.p. rubber tube white color, , alarm supply, installation, testing and commissioningof area pressure alarm panel would be witdigital display, closed circuit, self monitoringtype. the alarm would be designed to monitorthe line pressure in piping systems.it should be ce and iso 13485 certified. withfour digit notified no. area line pressure alarm 1 gases , isolation valve, supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified.42mm , isolation valve 2 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 28mm , isolation valve 3 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 22mm , isolation valve 4 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 15mm , isolation valve 5 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 12mm , pipeline 1 medical grade copper pipeline ( in mtrs. ) as per en 13348, 12 mm ( od ) x 0.7 mm thickness , pipeline 2 medical grade copper pipeline ( in mtrs. ) as per en 13348, 15 mm ( od ) x 0.9 mm thickness , pipeline 3 medical grade copper pipeline ( in mtrs. ) as per en 13348, 22 mm ( od ) x 0.9 mm thickness , pipeline 4 medical grade copper pipeline ( in mtrs. ) as per en 13348, 28 mm ( od ) x 0.9 mm thickness , pipeline 5 medical grade copper pipeline ( in mtrs. ) as per en 13348, 42 mm ( od ) x 1.2 mm thickness , hospital sheet patient bedtype iii with mattress overall sizes: ( l ) 2268 mm x ( w ) 922 mm x ( h ) 610 mmdescription: sheet bed should be a plain bed used in the recovery ward.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board / leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral whiteperformance specifications: maximum patient load should be 135 kgthickness mattress: 3+sandwitchconstruction: round corners yeshitlon thickness ( mm ) : 60hitlondensity ( gm / dcm3 ) : 23coir ( both side ) thicknessmm: 20density ( gm / dcm3 ) : 70, drc ( % ) : 22quilting combination / layers:pilled foam – quilting ( one side ) thicknessmm 14pilled foam density gm / dcm3 18pu foam / epe sheet side walling thicknessmm 3total mattress thickness mm 87rexine ( gsm ) : 150note: * finish product thickness should be measure from outer to outer surface. tolerance +5 mm , paediatric bed with mattress paediatric bed of overall sizes in mm: 1500 ( l ) x 850 ( w ) x 1210 ( h ) flat single section bed with grille frame on 4 sides.suitable for children up to 12 years.drop down grill frame on both sides for protection of the patient.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board / leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral white , bed side locker type i over all dimension :402mmlx422mm wx840mm ht .locker should have one cabinet and one drawer unit .both provided with cam lock .there should be gap between drawer and unit to keep general items for frequesnt use castors are provided for easy handling .drawer made up of crca sheet 1 mm thick and has ball slide for easy operation .top ss 304 sheet 0.8 mm thick castors 50 mmdia , hamdle abs ..powder coating of epoxy polyester , medicinetrolleytype i overall size902mm ( l ) x532mm ( w ) x915mm ( h ) .top shelf should be made of ss 304 sheetof 1 mm thick. supporting legs made of ss304 tubesection 30.30 mm dia.of 1.2 mm thick provided to suppoort the entire structure.ss 304 tube provided at the bottom for placement of instument being used .handle made up of ss 304 tubeof dia dia 16 mmand thickness 1.2 mm provided to handle trolley .and maneuver accordingly. high endurance anti static plastic injection moulded castors of 125 mm dia.ss should be finished in glossy mirror finish. max load capacity of 10 kg / shelf udl , round stooltype i overall sizes diagonal legdia 538 mmh470 min 655max.ss 202 made sheet with spin section of thickness 1mm & should be non corrosive. it should have a diameter of 305mm, seat base is made of ms ring and rectangular tube.en8 screw having dia of 22 mm should be used for height adjustment of the seat base.the hub should be made of ms erw tube having dia of 38mm and thickness 2 mm.the hub should be welded with the legs and it should accommodate and cover the lead screw mechanism.the understructure should consist of 4 legs made up ofms erw tube of diameter 25.4 mm and 1.6mm thick. the press formed pipe leg should give a round & clean look. all the legs should be provided with 4 nos of nylon 6 bush.all metal componentsshould be pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbialepoxy polyster powder coating . all welding should be co2 argon welding to minimise rusting on the welding areas.safe working load must be 135kg , strecher on trolley type i 2005mm ( l ) x666mm ( w ) x827mm ( h ) .the trolley should be made of 31.75 and 25.4 mm dia 1.6 mm thick erw tube.holder for stretcher should be made up of mild steel.castor should be of 200 mm dia , diagonal locking castor.stretcher should be made up oferw tubeof dia 25.4 mm and thickness 1.6 mm.top sheet should be made of crca sheetof thickness 1.2 mm with contour shape to accommodate patient.iv pole holder should be made ofms .maximum safe work load should be 135 kg.to ensure qood quality welding co2 argonprocess should be adhered to.all metal componentsshould be pre treated with zinc phosphating in 9 tank porcess and then powder coated with anti microbialepoxy polyster powder coating.goods should be supplied in knocked down construction to reduce carbon emission. performance test :proof loading test , cycle tests , impact test, salt spray test, castor break test, the manufacturer should compilant with iso 9001, 14001, 13485, ohsas 1800 and ce certification. , doctor desk type x s / f / f executive table main desk should be of dimesion : 1350w x 750d x 750h.the table top should bein white cedar, side panelsin black, while the modestypanel ina combination of black & white cedar. side panels : ( black ) made form 18mm thick plt with pvc lipping.modesty panel : made form 18mm thick plt with pvc lipping. bigger upper panel in black and smaller lower panel in white cedar. made from 18mm thick plt with pvc lipping. mobile pedestal : one box and one filing drawer with 18mm thick plb fronts and top. handles : black powder coated die cast aluminum alloy handles. mobile pedestal and hdu are fitted with central lock. , chair type iii s / f / f executive chair1 ) seat / back assembly: the seat and back are made up of 1.2 cm. thick hot pressed plywood, upholstered withfabric upholstery covers and moulded polyurethane foam. the back foam is designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area.high back size : 47.5 cm ( w ) x 69.5 cm ( h ) seat size : 47.0 cm. ( w ) x 48.0 cm. ( d ) 2 ) polyurethane foam: the polyurethane foam is moulded with density = 45 + / 2 kg / m 3and hardness = 20 + / 2at 25% compression. 3 ) armrests: the one piece armrests are injection moulded from black co polymer polypropylene. 4 ) center tilt synchro mechanism : the mechanism is designed with the following features:• 360 revolving type. • upright position locking. • tilt tension adjustment.• seat / back tilting ratio of 1:3 ( 60 seat tilt / 180 back tilt ) . 5 ) pneumatic height adjustment : the pneumatic height adjustment has anadjustment stroke of 12.0 cm. 6 ) telescopic bellow assembly : the bellow is 3 piece telescopic type and injection moulded in black polypropylene. 7 ) pedestal assembly : . , staff / visitor chair type i chair of over all size: 58.0cm ( w ) x 56.5cm ( d ) x 87.5cm ( h ) & 48.0cm ( sh ) seat / back assembly: the seat and back are made from chemically treated and seasoned wood, upholstered with plywood, black leather cloth, and u foam.*back size: 46.0cm ( w ) x 27.0cm ( h ) .*seat size: 46.0cm ( w ) x 40.0cm ( d ) .armrest tube: the armrest tube is made of m.s. e.r.w. tube dia. 2.54cm. ( 1” ) x 16bg thick and powder coated.armrest: the armrest is gas assisted injection moulded from black polypropylene.understructure assembly: the understructure assembly is a cantilever type frame made of dia. 2.54cm. ( 1” ) x 14bg. thick m.s. e.r.w. tube and powder coated. , wheel chair type i ( l ) 790 x ( w ) 600 x ( h ) 870mm.foldable frame structure should be made of section 22diax1.2mm a3 carbon steel with chrome finish. cross bar should be made of a3 carbon steel with section 25.4 x 1.2mm.rear wheel:24 inch solid mag wheels with alloy in the rim .integrated handrim provide to drive the wheel chair of section 16x1.2mm a3 carbon steel with chrome finish.front wheel :8 inch hub made of pa polymer and outer with solid rubber.pu molded arm rest & base should be made of abs for better arm support .leatherite strap for calf rest & leatherite cushion for seat.adjustable alluminimum die cast foot rest with updown & swivel type mechanism.handles should be made of moulded rubber grip to push the wheelchair.hand brakes should be provided to lock the wheelchair at desired location.foot pressextended base with molded plastic for better grip.anti rust chrome finsh. safe work load of100 kg , basin stand type i ht 850 mm ss bowl ms tubular frame of dia 25.4 x1.2 mm tube work mounted on three 50 dia.non rusting castors all without brack. ss part finished with matt polish , kick buckettype i overa all dimension of the bucket should be 517 mm ( l ) x 517 mm ( w ) x 210 mm h.it should made of 12.7 mm dia and 1.6 mm thick ss 304 ring. the bowl should be ss made of .8 mm thck .3 nos 50 mm diahigh endurance plasticinjection moulded castors should be provided for the movement.mx load bearing capacity should be 10 kg. , hospital curtain tracks & i.v. tree system supply installation testing & commissioning of cubical tracks system made of powder coated aluminium alloy, stain free polyster fabric , water repellent curtains , smooth movement , non sticking runnner with stainless steel hooks made from mirror finish stainless steel , adjustable height with all accessories. total quantity : 1...
30458798 bids are invited for pile boring, providing and installation bored cast in situ reinforced cement concrete piles of grade m 25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using direct mud circulation ( dmc ) or bailer and chisel technique by tripod and mechanical winch machine all complete, including removal of excavated earth with all its lifts and leads ( length of pile for payment shall be measured up to bottom of pile cap ) .450mm dia piles ( inclusive of carriage ) , pcc providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering all work up to plinthlevel : 1:3:6 ( 1 cement : 3 coarse sand ( zone iii ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources ) ( inclusive of carriage ) , rcc providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland / portland slag cement, admixtures in recommended proportion as per is: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer in charge; for the following grades of concrete. note: extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re design the mix or bear the cost of extra cement. ( inclusive of carriage ) , brick work brick work with bricks of class designation 100a in foundations and plinthin :cement mortar 1:4 ( 1 cement : 4 coarse sand ) ( inclusive of carriage ) , sand filing supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. ( inclusive of carriage ) with lead upto 3 km , shuttering centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete , steel steel reinforcement for r.c.c. work ready to use cut and bend rebars of approved make from factory / workshop to construction site including placing in position and binding all complete thermo mechanically treated bars of grade fe 500d or more. , plinth protection making plinth protection 50mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand ( zone iii ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources ) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. , door & window providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, paneling and dash fasteners to be paid for separately ) :powder coated aluminium ( minimum thickness of powder coating 50 micron ) , glass providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) :with float glass panes of 5 mm thickness ( weight not less than 12.50 kg / sqm ) , upvc door providing and fixing of factory made upvc white colour casement door, upvc multichambered extruted frame, sash and mullion profile. frame duly reinforced with 1.2mm gi section box tpe chamber and sash with 1.5mm thick gi section ( ± 0.2mm ) based on wind load calculations ( shape and size according to upvc profiles ) , appropiate dimentions of upvc extruded glazing bead, epdm gasket ( k / o type ) , seperate drainage system, ss34 grade friction hinges 2d / 3d plate hinges, zinc alloy ( white powder coated ) casement handle, gi fastener 8x100 mm size for fixing frame to finish wall, plastic packer and caps and necessary steel screws etc.profile of frame and sash shall be metered cut and fusion welded at all corners, mullion shall be also fusion welded / joined mechanically including drilling of holes for fixing hardware and drainage of water etc. after fixing of frames , gap between frame and adjascent wall shall be filled with pu foaam / backer rod required size and the approved quantity. after that sealed with weather proof silicon sealant at both side, all complete as per approved drawing and direction of eic , door closer providing and fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ) , with necessary accessories and screws etc. complete. , door providing and fixing isi marked flush door shutters conforming to is : 2202 ( part i ) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including stainless steel butt hinges wirhnecessary screws , door stopper providing and fixing aluminium hanging floor door stopper, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour and shade, with necessary screws etc. complete. single rubber stopper , solling providing designation 100 a one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as perbuilding specification and direction of e / l, , tile 1 providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm , tile 2 providing and laying ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including pointing the joints with white cement and matching pigment etc., complete. , tile 3 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. , granite providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge :flamed finish granite stone slab jet black, cherry red, elitebrown, cat eye or equivalent. , false ceiling providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance ( rh ) of 99%, light reflectance ? 85%, thermal conductivity k = 0.052 0.057 w / m k, fire performance as per ( bs 476 pt 6 &7 ) in true horizontal level suspended on interlocking t grid of hot dipped all round galvanized iron section of 0.33 mm thick ( galvanized @120 gsm ) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item ( galvanised@80gsm ) 50 mm long 8mmouter diameter m 6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘t’ , pre fabsteel designing, providing, installing and fixing factory finished custom designed cold form light gauge steel framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. the steel sheet shall be galvanized ( az 150gms aluminium zinc alloy coated steel having minimum yield strength 300 550 mpa ) conforming to aisi specifications and ibc 2009 for cold formed steel framing and construction and also as per is: 875 1987, iso 800 1984 and is:801 1975. the wind load shall be as per provisions of is 875 ( part iii ) . lgsfs frame shall be designed as per is: 801 using commercially available software such as frame cad pro 11.7 / staad pro v8i / architekv2.5.16 / revit architecture 2011 or equivalent. proper usage of connection accessories like heavy duty tension ties, light duty hold ons, twist straps ( to connect truss with wall frames ) , strong tie, tie rod, h brackets, boxing sections, l shaped angles for better structural stability. the framing section shall be cold form c type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple / slot at required locations as per approved drawings. , pre fabwall providing and fixing of external wall system on light gauge steel frame work with outer face cement boards as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make. a groove of 2 mm to 3mm shall be maintained and grooves shall be sealed with silicon based sealant. the board shall be fixed in a staggered pattern. screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm and. internal face 12.5 mm thick gypsum plaster board fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. ( cost of frame work to be paid for separately ) outer face: outer face having 6mm thick fiber cement board fixed on 9mm thick fiber cement board, type a, as per is:14862:2000 ( high pressure steam cured ) inner face : 12.5 mm thick gypsum plaster board conforming to is 2095:2011 fixed on 8 mm thick fibre cement board confirming to is:14862:2000 of type b ( high pressure steam cured ) , pre fabin. wall providing and fixing internal wall panels on light gauge steel frame work with 12.5mm thick gypsum plaster board conforming is 2095:2011 fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make, screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. ( cost of frame work to be paid for separately , roof sheet supply & installation of precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by engineer in charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55mm ) with epdm seal or with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. , ridge plain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : ridges plain ( 500 600mm ) . , gutter drain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : gutter , flashing providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 5% total coated thickness ( tct ) , zinc coating 120gsm as per is: 277 in 240mpasteel grade, 5 7 microns epoxy primer on both side of the sheet and polyester topcoat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumenwashers complete :flashings / aprons. ( upto 600 mm ) , under deck insulation providing and fixing thermal insulation of ceiling ( under deck insulation ) with resin bonded rockwool conforming to is: 8183, density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to ceiling with metallic cleats ( 50x50x3 mm ) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. , resin bonded rock wool providing and fixing thermal insulation with resin bonded rock wool conforming to is: 8183, having density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to wall with screw, rawel plug & washers and held and in position by criss cossing gi wire etc. complete as per directions of engineerin charge. , face panel providing and fixing in all exterior face panels breathable vapour barrier underneath the cementfiber board as per national building code 2009 complete as per direction of engineer in charge. , lap siding supplying and installation of moisture resistant / fire resistantlap siding 8 mm thick and width as per standard sizes made ofiber cement board with embossed decorative finish to give pleasing exterior fixed horizontally with staggered joints including minimum over lapof 32 mm external cement fibre boardconforming to is 14862:2000 offixed with self drilling / taping screws / fastners of approved make. , putty providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distemper distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1 new work ( two or more coats ) over and including water tinnable priming coat with cement primer , ex. paint finishing walls with textured exterior paint of required shade : new work ( two or more coats applied @ 3.28 ltr / 10 sqm ) over and including priming coat of exterior primer applied @ 2.20kg / 10 sqm sqm , oil paint painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work . , steel 1 steel work in built up tubular ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. hot finished welded type tubes , excavation earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan ) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. , road providing and laying c.c. pavement of mix m 25 with ready mixed concrete from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc.complete as per specifications and directions of engineer in charge. ( the panel shuttering work shall be paid for separately ) . ( note: cement content considered in this item is @ 330 kg / cum. excess / less cement used as per design mix is payable / recoverableseparately ) . , paver block providing and laying 60 mm thick factory made cement concrete interlocking paver block of m 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thickcompacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer in charge. , phe 1 providing & fixing stone slab table rubbed, edges rounded and polished of size 75 x 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste 6mm nominal size ) as per engineer in charge and finished smooth white agaria marble stone , phe 2 providing and fixing salem stainless steel a isi 304 ( 18 / 8 ) kitchen sink as per is: 13983 with ci brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. kitchen sink with drain board510x1040mm bowl depth 200mm. , phe 4 providing and fixing mirror of superior glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing:rectangular shape 453x357 mm , phe 5 providing and fixing toilet paper holder:c.p. brass , phe 6 providing and fixing water closet squatting pan ( indian type w.c.pan ) with 100 mm sand cast iron p or s trap, 10 litre low fixturescomplete, including cutting and making good the walls andlevel whitep.v.c. flushing cistern, including flush pipe, with manually controlleddevice ( handle lever ) conforming to is : 7231, with all fittings andfloors wherever required :white vitreous china orissa pattern w.c. pan of size580x440 mm with integral type foot rests , phe 7 providing and fixing white vitreous china pedestal type water closet ( european type w.c. pan ) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device ( handle lever ) , conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : w.c. pan with isi marked white solid plastic seat and lid , phe 8 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer in charge , phe 9 providing and fixing cp brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge.. ( sink & urinal ) , phe 10 providing & fixingptmt towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealedfittings arrangement of approved quality and colour weighing not less than 88 gms , phe 11 providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms.15mm nominal bore , phe 12 providing and fixing c.p. brass bib cock of approved quality confirming to is:893115mm nominal bore , phe 13 providing and fixing c.p.brass angle valve for basin mixer and geyser points of approved quality conforming to is 8931 a ) 15 mm nominal bore.15 mm nominal bore , phe 14 providing and fixing wash bashin with c.i. brackets, 15mm dia cp brass singal hole basin mixer of approved quility and make, including painting of fittings and brackets, cutting and making good the walls wherever required white vitreous china surgeon type wash basin of size 660x460 mm with a pair of 15 mm c.p. brass pillar taps with elbow operated levers , phe 15 providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption ) , having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of engineer in charge.. , phe 16 providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. , phe 17 providing and fixing white vitreous china laboratory sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p brass waste and 40mm c.p. brass trap with necessary c.p. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :size 600x450x200 mm , phe 18 providing and fixing cp brass single lever telephonic wall mixer of quality & make as approved by engineer in charge . a ) 15 mm nominal dia. , phe 19 providing and fixing cp brass shower rose with 15 or 20 mm inlet100 mm diameter , phe 20 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. , phe 21 providing and fixing ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. , phe 22 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. ( internal work ) 40 mm dia, nominal bore , phe 23 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. ( internal work ) 50 mm dia, nominal bore , phe 24 two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand andmanufacturetwo more coast on new work , phe 25 p / f m.s. cap 100 mm dia , phe 26 providing and fixing, upvcpipes 6 kg / cm2 ( is: 4985 ) including all fittings ( plain or door ) e.g. bends, junction, offsets, access pieces, jointing with rubber ring / solvent cement joints includingrequired suports, cutting chase or holes in walls and floors and making good where required.75 mm dia pipe , phe 27 providing and fixing, upvcpipes 6 kg / cm2 ( is: 4985 ) including all fittings ( plain or door ) e.g. bends, junction, offsets, access pieces, jointing with rubber ring / solvent cement joints includingrequired suports, cutting chase or holes in walls and floors and making good where required.110 mm dia pipe , phe 28 providing & fixing on wall face unplasticised rigid pvc rain water pipes conforming to is:13592 tyape a included jointing with seal ring conforning to is:5382 leaving 10 mm gap for thermal expansion. ( i ) single socketed pipes.110 mm diameter , phe 29 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. coupler 110 mm diameter , phe 30 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. bend 87.5 deg 110 mm diameter , phe 31 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. shoe 110mm shoe , phe 32 providing & fixing unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50mm hard wood plugs, screwed with .m.s. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1cement : 4 coarse sand ) and making good the wall etc. complete.110 mm dia , phe 33 providing and fixing cpvc pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 20 mm nominal outer dia pipes , phe 34 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 25mm dia, nominal bore , phe 35 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 32 mm dia, nominal bore , phe 36 providing and fixing gun metal non return valve of approved quality ( pn 1.6 ) 40 nominal bore , phe 37 providing and fixing brass stop cock of approved quality15mm nominal bore , ex. phe 6 providing 250mm wide brick drain in cement mortar ( 1:6 ) with av. 150mm.clear depth and 250mm apron including cost of e / w. involved with 75mmcement concrete ( 1:4:8 ) over one brick designation 100 a flat soling inproper grade and slope at the base.the drain duly.plastered in cm. ( 1:3 ) with punning over exposed surface all complete as per buildingspecification and direction of e / l, , ex. phe 7 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil ( hard or soft ) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [ hard / dense soil ] pipes, cables etc.exceeding 80mm dia.but not exceeding 300mm dia. , ex. phe 8 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil ( hard or soft ) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [ hard / dense soil ] pipes, cables etc.exceeding 80mm dia. exceeding 300mm dia. , ex. phe 9 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 250 mm dia rcc pipe , ex. phe 10 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 300 mm dia rcc pipe , ex. phe 11 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 450 mm dia rcc pipe , ex. phe 12 inside size 120x90 cm and 90 cm deep including c.i. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg ) :with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , ex. phe 13 providing and fixing square mouth sw gully trap grade ‘a’ complete ci grating brick masonry chamber with bricks of class designation 75 and water tight ci cover with frame of 300 x 300 mm size ( inside ) the weight of cover to be not less than 13.00 kg and frame to be not less than 5 kg. as per standard design. ( cover min. 4.5 kg & frame min.2.7 kg ) 180x150 mm size p type with fps bricks , ex. phe 14 constructing masonry chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement:4 coarce sand ) for stop cock complete with c.i. surface box 100x100x75mm ( inside ) with locking arrangement and rcc top slab 1:2:4 mix ( 1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size ) necessary excavation foundation concret 1:5:10 ( 1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortor 1:3 ( 1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design. , ex. phe 15 constructing masonry chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement: 4 coarse sand ) for sluice valve, with c.i. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with channel lid and rcc top slab 1:2:4 mix ( 1 cement: 2 coarse sand: 4 graded stone sggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement: 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design:with f.p.s. bricks , ex. phe 16 structual steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , ex. phe 17 making connection of gi distribution branch with gi main of 50 80mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete. , rain water harvesting 1 boring / drilling bore well of required dia for casing / strainer pipe, bysuitable method prescribed in is:2800 ( part i ) , including collecting sample from different strata , preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , rain water harvesting 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , rain water harvesting 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150 mm nominal size dia , rain water harvesting 4 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 5 supplying, filling, spreading & levelling gravel of size range 5mm to 10mm, in recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 7 providing and fixing bail plug / bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 ( part i ) . 100 mm dia , rain water harvesting 8 making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , rain water harvesting 9 constructing soak pit 1.20x1.20x1.20 m filled with brickbats including s.w. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , tubewell 1 boring / drilling bore well of required dia for casing / strainer pipe, bysuitable method prescribed in is:2800 ( part i ) , including collecting sample from different strata , preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , tubewell 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , tubewell 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100mm nominal size dia , tubewell 4 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100 mm nominal size dia , tubewell 5 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , tubewell 6 providing and fixing bail plug / bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 ( part i ) . 100 mm dia , submersible pump 35m deep boring with casing and pipe. supply of pipe etc supplying & installation of suitable 2hp submersible pump b.s or k.s.bor equivalent make with finolex cable 1x3x2.5 squmm ( upto 50mtr ) withflexible conduit 25mm dia, electrical out door pannel with required electrical fitting such as mcb of 0 25amp ( havell or indocopp or mds make ) , volt & ampere meter ( ae make ) , single phase preventer ( minilac or vsp 1 make ) starter ( l&t or bch make ) etc of approved make, 40mm hdpe pipe ( 25 mtr ) and all accessories complete as per requirement of site. , water purifier and cooler 1 fitting and fixing single faucet storage type water cooler ( size 461 mm wide x 582 mm deep x 1217 mm height, weight 46 kg ) fully stainless body having storage capacity of 40 ltrs, cooling capacity of 40 ltrs. / hr. with hermetic type compressor, gas cooled motor equipped with over load protector, condensor for propeller type, thermostat autometically controlled temperature, refrigerent r 22, 230 volt, single phase 50 hertz, maximum current 2.3 amp including plug top and electrical lead wire connection upto 3 metres from the cooler, water inlet and drain out connections complete in all respects of voltas model no 40 / 40 tushar pss type or similar type of approved make. , water purifier and cooler 2 fitting and fixing water purifier for drinking purpose of capacity 6 litres / min, 5 purification system with reverse osmosis system with ultra ventilated membrane, tds500 to 2000 mgl / ppm, auto shut off with microswitch float manual flush facility, tds reduction 90% having automatic backwash system with filteration unit along with all accessories including plug top and electrical lead wire connection upto 3 metres from the purifier, water inlet and drain out connections complete in all respects similar to aquaguard or similar approved make ( model aquasure elegant ro water purifier of size width 360 mm x height 430 mm x depth 235 mm and weight 8.5 kg ) . , fire extinguisher 1 providing and fixing carbon di oxide type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. capacity 4.5 kg. , fire extinguisher 2 providing and fixing abc powder type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.capacity 6.0 kg. , electrical 1 wiring for light point / fan point / exhaust fan point / call bellpoint with 1.5 sq.mm frls pvc insulated copper conductorsingle core cable in surface / recessed steel conduit, withmodular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group c , electrical 2 wiring for twin control light point with 1.5 sq.mm frls pvcinsulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required. , electrical 3 wiring for group controlled ( looped ) light point / fan point / exhaust fan point / call bell point ( without independent switch etc. ) with 1.5 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, and earthing the point with 1.5 sq. mm frls pvc insulatedcopper conductor single core cable etc. as required. group c , pvc conduit 1 supplying and fixing of following sizes of medium class 20mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 2 supplying and fixing of following sizes of medium class 32mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 3 supplying and fixing of following sizes of medium class 50mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , electrical 4 wiring for light / power plug with 2x4 sq. mm frls pvcinsulated copper conductor single core cable in surface / recessed conduit alongwith 1 no. 4 sq. mm frls pvcinsulated copper conductor single core cable for loop earthingas required. , wiring frls pvc insulated copper conductor 1 2 x 2.5 sq. mm. + 1 x 2.5 sq. mm. earth wire , wiring frls pvc insulated copper conductor 2 2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire , wiring frls pvc insulated copper conductor 3 4 x 6 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 4 4 x 10 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 5 4 x 16 sq. mm + 2 x 16 sq. mm earth wire , s / f, gi box along with modular base & cover plate 1 or 2 module ( 75mm x 75mm ) , s / f, gi box along with modular base & cover plate 1 3 module ( 100mm x 75mm ) , s / f, gi box along with modular base & cover plate 2 4 module ( 125mmx75mm ) , s / f, gi box along with modular base & cover plate 3 6 module ( 200mm x 75mm ) , s / f, gi box along with modular base & cover plate 4 12 module ( 200mmx150mm ) , s / f modular switch / socket on the existing modular plate 5 / 6 amps switch , s / f modular switch / socket on the existing modular plate 2 15 / 16 amp switch , s / f modular switch / socket on the existing modular plate 3 3 pin 5 / 6 amp socket outlet , s / f modular switch / socket on the existing modular plate 4 6 pin 15 / 16 amp socket outlet , s / f modular switch / socket on the existing modular plate 5 telephone socket outlet , s / f modular switch / socket on the existing modular plate 6 tv antenna socket outlet , s / f modular switch / socket on the existing modular plate 7 bell push , electrical 5 supplying & fixing suitable size gi box wih modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, “c” curve including connections, painting etc. as required. ( for ac / geyser ) , electrical 6 supplying and drawing co axial tv cable rg 6 grade, 0.7 mm solid copper conductor pe insulated, shielded with fine tinned copper braid and protected with pvc sheath in the existing surface / recessed steel / pvc conduit as required. , electrical 7 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. , electrical 8 providing and fixing m.s. fan clamp type i or ii of 16 mm dia m.s. bar, bent to shape with hooked ends in r.c.c. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as required. , electrical 10 supplying and fixing 20 a, 240 v, spn industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 a c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. , electrical 11 supplying and fixing 20 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 12 supplying and fixing 30 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 13 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 8 way , double door , electrical 14 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 12 way , double door , electrical 15 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 16 way, double door , electrical 16 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 6 way ( 4 + 18 ) , double door , electrical 17 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 8 way ( 4 + 24 ) , double door , electrical 18 supplying and fixing of following ways surface / recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs ( but without mcbs and incomer ) as required . ( note : vertical type mcb tpdb is normally usedwhere 3 phase outlets are required. ) 4 way ( 4 + 12 ) , double door , 40 a, rccb supplying and fixing following rating, double pole, ( single phase and neutral ) , 240 v, residual current circuit breaker ( rccb ) , having a sensitivity current 30 ma in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a mcb supplying and fixing 40 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 40 tp mcb , single pole mcb supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 63a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 100a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , l / f pvc sheathed / xlpe power cable in trench laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 95 sq. mm and upto 185 sq. mm , l / f pvc sheathed / xlpe power cable in trench 1 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm , l / f pvc sheathed / xlpe power cable over cable tray upto 35 sq. mm ( clamped with 1mm thick saddle ) , l / f pvc sheathed / xlpe power cable over cable tray 2 above 35 sq. mm and upto 95 sq. mm ( clamped with 25x3mm ms flat clamp ) , l / f pvc sheathed / xlpe power cable over cable tray 3 above 95 sq. mm and upto 185 sq. mm ( clamped with 25 / 40x3mm ms flat clamp ) , l / f pvc sheathed / xlpe power cable over cable tray 4 above 185 sq. mm and upto 400 sq. mm ( clamped with 40x3mm ms flat clamp ) , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3.5c x 300 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 1 3.5c x 240 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 2 3.5c x 120 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3 3.5c x 95 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 4 3.5c x 50 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 5 4c x 35 sqmm aluminium conductor cable a2xfy , cable tray supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 100 mm width x 50 mm depth x 1.6 mm thickness , cable tray 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 300 mm width x 50 mm depth x 1.6 mm thickness , cable tray 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 600 mm width x 62.5 mm depth x 2.0 mm thickness , cable tray “bends” supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.100 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.150 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.300 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 3 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.450 mm width x 50 mm depth x 2 mm thickness , cable tray “bends” 4 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.600 mm width x 62.5 mm depth x 2.0 mm thickness , mv cable supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 300 sqmm, aluminium conductor cable a2xfy , mv cable 1 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 240 sqmm, aluminium conductor cable a2xfy , mv cable 2 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 120 sqmm, aluminium conductor cable a2xfy , mv cable 3 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 95 sqmm, aluminium conductor cable a2xfy , earthing earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required. , earthing 1 earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. , earthing 2 earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. , earthing 3 providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required. , earthing 4 providing and fixing 25 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required. , earthing 5 providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required. , earthing 6 providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for connections etc. as required. , fiting & fixtures 1 supply and installation of regular / standard model a.c. ceiling fan of 1400 mm sweep including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq. mm fr pvc insulated copper conductor etc as required. , fiting & fixtures 2 supplying and fixing single wall mounted 18 / 22 watt led type batten fitting complete with electronic driver and led tube etc directly on wall / ceiling includingconnections with 1.5 sq.mm fr pvc insulated copper conductor and earthing the body etc. as required. , fiting & fixtures 3 supply installation and comissioning ofintegrated batten made ( 2ft ) of ultra slim co extruded polycarbonate channel with housing part in white finish & diffuser part in reeded opal finish.white finish abs end caps with decorative circular coloured polycarbonate cap snap fitted on the end cap to enhance the aesthetic of the fixture. these end caps are snap fitted to the fixture.high efficiency long life led with lumen efficacy of 130 lm / w with viewing angle of 120º.powered by an integral isolated low thd electronic led driver ( smps based constant current supply ) with output short circuit protection, surge protection.can be fixed directly into the wall / ceiling by means of mounting ss clips provided with the fixture. ip 20, lumen output of 950 lumens with system efficacy of > 105lm / w .cri >80, color temperature 6500k, thd <20% and pf>0.95, ip20 . life class of 35, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz;internal surge protection:3 kv; protection including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. : reverse polarity, open & short circuit. driver safety requirement standards :is 15885 2 13, test report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source. cat ref havells :lumilinebs9wled840spcwh or approved equivalent. , fiting & fixtures 4 supplying and fixing recess mounted 12 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 5 supplying and fixing recess mounted 18 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 6 supply, installation, testing and commissioning of 400 mm sweep, 65w, blade material aluminium blades , speed & oscillation 3 speed, pull cord for speed and oscillation.air delivery minimum 72 m³ / min, speed minimun 1350 revolution per minute.suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. , fiting & fixtures 7 supply installation and comissioning of 28w 2x2 panel recess mounting luminaire with high performance leds, suitable for mounting with armstrong / grid ceiling.crca powder coated white after phosphochromate treatment.high efficiency long life led package in integral module with lumen efficacy of >100 lm / w and viewing angle of 120° to ensure better uniformity.powered by an independent isolated, selv output electronic led driver ( smps based constant current supply ) with output short circuit protection, surge protection & other reliability test. lumen output of 3450 lumens.cri >80, color temperature 5700k, thd <10% and pf >0.95, ip20, ik03.life class of 50, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz;internal surge protection:3 kv; protection including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. : reverse polarity, open & short circuit. driver safety requirement standards :is 15885 2 13, test report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source.cat ref havells :venusneohe2x2plr128wled857 or approved equivalent. , fiting & fixtures 8 supplying installation testing & commissioning ofb22 based 9w led 3 star bulb with 850 lumen, 6k color temperature including holder. , fiting & fixtures 9 supplying installation testing & commissioning of black painted extruded aluminium housing. green / red led’s mounted inside the housing. laser engraved signage matter on single / double acrylic sheet fixed on one side suitable for wall / ceiling / suspension type single / double sided display. in double sided version black paper is inserted. ni cd battery back up to 2 hrs. ( charged up to 8 10 hrs ) .mounting strings provided for pendent mounting operating voltage 150 280v ac ambient operating temperature. – 0 to 450c ingress protection – ip42.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. 220208 besl 03 led ssd wbb green 240 3 8wor220209 besl 03 led ssd wbb red 240 3 8wor220210 besl 03 led dsd wbb green 240 3 8wor220211 besl 03 led dsd wbb red 240 3 8w , fiting & fixtures 10 supply, installation, testing & erecting of ip66 bulkhead surface type lighting fixture 10w made up of pressure die cast aluminium housing and polyster powder coated die cast aluminium with high quality polycarbonate diffuser in opal finish for glare free light distribution.high efficiency long life led module with smd led package mounted on mcpcb with lumen efficacy of >95 lm / w with system lumen 950. powered by integral electronic led driver with apfc with low thd output short / open circuit protection. cct 5700, cri>80, system efficacy>90lm / w, thd<15%, pf>.95, ip66, ik 10, life class of 50, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. cat ref: havells : hexaft10wled857ssymbopc or approved equivalent. , civil & misc works1 providing and fixing m.v. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works2 providing and fixing h.t. danger notice plate of 250 mm x 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works3 supplying and making cable route marker with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm x 60 cm at the bottom and 50 cm x 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. , civil & misc works4 supplying and fixing cable route marker with 10 cm x 10 cm x 5 mm thick g.i. plate with inscription there on, bolted / welded to 35 mm x 35 mm x 6 mm angle iron, 60 cm long and fixing the same in ground as required. , civil & misc works5 providing & fixing in position 1000 mm wide , electrical insulating rubber mats as per is 15652:2006, 2 mm thick, suitable up to 1.1 kv , fire retardant, no effect of acids, alkalis and transformer oils, moisture proof, high tensile strengthandtexture finish / cloth impression ( anti slip , marking on top ) , civil & misc works6 supply & fixing shock treatment chart duly mounted on a wooden frame with 5 mm thick glass as required ( approx front area 1.20 sq metre ) , 40 kvaups supplying, installation, testing and commissioningof online double conversion fully microprocessor based , indoor type, compact ups system of following rating with igbt based pwm technology to achieve thd < 3% and input power factor of greater than 0.95 at 50% loading, suitable for three phase ac input voltage 380 v to 440 v, 50 hz +3% / 3 % and three phase ac output voltage 415 ± 1% volts & frequency 50 ± 0.5 hz , inbuilt isolation transformer, necessary vrla batteries of suitable size having 30 minutes back up time , mounting rack including and suitable size connecting cable ( for ups to battery and battery to battery ) , static and maintenance bypass switch, snmp card for rs232 / ethernet ip computability for operation and monitoring etc. with all components as mentioned , specifications, complete as required.note : concerning vendor needs to furnish the battery sizing calculations at the time of ga approval and battery size has to be as per the approved ga drawing. , external lighting 1 supply and erection of 4 metre height hot dipgalvanized octagonal street light pole with followingarm with top dia 70 mm and bottom dia a / f 130 mm, made of 3 mm thick sheet along with base plate of size220 x 220 x 12 mm , small door opening for junctionbox mounting with mcb & connector, cement concreteof 1:3:6 including excavation, refilling and suitable sizefoundation bolts with template and all complete jobasrequired. ( but without pole collar ) single arm , external lighting 2 supplying and fixing 40 / 45 watt led type street lightwith die cast aluminium housing for ingress protectionof ip65 and complete with all accessories etc, onpole / building including connection with fr pvcinsulated copper conductor cable and earthing thebody etc. as required. , ip based cctv system 1 sitc of 2 megapixel @ 25fps, h.265 ip bullet camera, 1 / 2.9 cmos with 2.8~12mm varifocal lens, 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 2 sitc of 2 megapixel @ 25fps, h.265 ip dome camera, 1 / 2.9 cmos with 3.6 fixed mm 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 3 sitc of 2 megapixel @ 25fps, ptz camera h.265 ip dome camera, 1 / 2.9 cmos with 2.6 fixed lenslux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 4 sitc of 32ch 4k ivr , h.265 / h.264 • 1080p real time • 4k display • dual lan • 8x hdd • raid •web plugin free h.265 / h.264 compression technology 4k display for clear monitoring up to 1080p 16ch decoding ability smart search ii smart vca event searchsupport raid 0, 1, 5 supported to prevent from recording data loss browsers supported: ie , smart functions : target count, electric fence, face detection, humaniod detection, retrograde detection, leave position detectio output, local & network backup etc. complete as required. , cctv 5 sitc of harddiskdrive8tb, 24 / 7surveillance category only complete etc as required.etc.all complete , cctv 6 sitc of 55 led narrow bazel for monitoring for nvr server etc. all complete. , cctv 7 sitc of rj 45 outlets near the cameras etc. all complete. etc. all complete. , cctv 8 sitc of cat 6 patch cords 1 meter high quality four pair twisted stranded cable terminated with rj45 modular plugs at both the ends. , signage 1 providing & fixing of building direction signage mounted on pole, with pole of 100x100mm shs ( square hollow section ) of height of 5600mm, and sign size of 900x1050, sign made of aluminiu c section of 60mm with internal framing to support the frame in ms tubes hollow section, frame work duly painted with anti rust coatings, with facia of 3mm thick exterior grade aluminium composite panel, cladded with uv cured digital printed retroreflective sheet of 3m make, and back panel of 3mm exterior grade acp, all pipes to be painted in approved color. cost shall includecost towards installation, including excuvation and filling up with specified pcc and fixing of foundation bolts as specified, also it shall include the designing charges.all complete as per direction by engineer in charge. , signage 4 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge , wall projected 250x210mm, both sides , signage 5 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge, door mounted, 300x80mm , 2 tr air conditioning 1 split ac ( inverter model ) : supply, installation, testing, commissioning of split type wall mounted air conditioning units of following capacity including inddor, outdoor unit fitted with inverter based rotary compressor fitted with rotary compressor, copper condensor and first charge refrigent r410a / eco friendly green gas only, all complete including all electrical connections to the electrical power supply system of the building, includingbut not limited to supply of all electrical plugs, etc., as necessary, lengthening of all electrical wires of ac units ( both indoor and outdoor ) , drain pipe andincluding suitable voltage stabilisers, etc. so as to place them in a concealed manner in the desired position. the copper pipes and electrical cables shall be concealed in approved manner and neatly run in straight lines in a workman like manner with proper supports. complete supply and installation of split2 tr star rating 3 star , refrigerant piping copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 25 mm od, wall thickness >= 1.2 mm ( insulation 19 mm thick ) , refrigerant piping 1 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 19.1 mm od, wall thickness >= 1.0 mm ( insulation 13 mm thick ) , refrigerant piping 2 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 15.9 mm od, wall thickness >= 0.8 mm ( insulation 13 mm thick ) , refrigerant piping 3 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 9.5 mm od, wall thickness >= 0.8 mm ( insulation 13 mm thick ) , drain piping providing and fixing of cpvc 6 kg / cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 20 mm , drain piping 1 providing and fixing of cpvc 6 kg / cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 32 mm , main oxygen manifold supply, installation, testing and commissioning of following gas manifold system ( excluding cylinders ) . the manifold is configured for designed numbers of cylinders and is suitable to withstand a pressure of 145 kg / cm2, along withhigh pressure copper annealed tail pipes with end brass adapter suitable for cylinders and manifold. top frame comprising of high pressure copper pipes of size 1 / 2” nb x 15swg with high pressure brass fittings made of high tensile brass and connections through nonreturn valves, the design of middle and bottomframes is provided to fit both round and flat bottom cylinders safely. the manifold is tested ( hydraulically ) at 3500 psig. ( it should be ce and iso 13485 certified ) mani fold oxygen manifold 6 + 6 cylinder banks complete with nrv, middle frame, bottom frame with ce marked, , emergency manifold emergency oxygen manifold 01 + 01 cylinder emergency manifold with complete regulator, nrv, middle frame & bottom frame, , control panelfor oxygen fully automatic three port control panel for oxygen supply, installation, testing and commissioning of automatic manifold control panel would provide a duty or standby gas supply from two cylinder banks with automaticchangeover the manifold indicates local status and has a remote indicator facility. automaticmanifold control panel would be designed to supply the mgps with a constant pressure supply via a control panel form two equal banks of cylinders and the changeover from the ‘duty’ to the ‘standby’ bank of cylinders would beautomatic. automatic changeover from the duty to the standby bank would occur at a cylinder pressure that will ensure the maximum usage of the contents of the duty bank. the changeover unit would be provided with monitoring todetect and display: duty bank operating, duty bank empty, standby bank operating, and standby bank below 10 % when the duty bank is empty, reserve bank low, pipeline pressure fault. there would be facility to connect liquidoxygen supply ( i.e. three port control panel ) ( it should be ce and iso 13485 certified ) fully automatic three port control panel for oxygen , emergency manifold line regulator emergency manifold line regulator supply, installation, testing and commissioning of emergency manifold line regulator i n p u t p r e s s u r e 1 5 0 k g / c m 2 working pressure 4 kg / cm2 it should be ce and iso 13485 certified.oxygen input pressure 150 kg / cm2 working pressure 4 kg / cm2capacity : 1500 lpm , cylinderconnectingpipe ( pig tail ) supply, installation, testing and commissioning of cylinder connecting pipe ( pig tail ) made up of flexible ss hose with safety cord 5 / 8 inch bsp gland nut and one side 1 / 2 inch bsp internal threads having one meter length. ( oxygen 24 , n2o 10, co2 4 ) , backpressurecompensated [ bpc ] oxygen flowmeter supply, installation, testing and commissioning of back pressure compensated [ bpc ] oxygen flow meter body should be made of brass material dully chrome plated and graduated from 0 15 l / m on an expanded lower scale forprecision setting at low flow and 5 15 l / m for general use. the humidifier bottle should be made up of unbreakable polycarbonate / polysulphone material and autoclavable at 121 degree centigrade temperature. it should be ceand iso 13485 certified. , oxygen gas outletfront loadeddin / bsstd gas outlet front loaded din / bs std:supply, installation, testing and commissioning of din / british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din / british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din / bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , medical air ( 4 bar ) outletfront loadeddin / bsstd gas outlet front loaded din / bs std:supply, installation, testing and commissioning of din / british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din / british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din / bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , quickconnectadapter din / british standard quick connect oxygen adapter ( safety probe ) , tube oxygen h.p. rubber tube white color, , alarm supply, installation, testing and commissioningof area pressure alarm panel would be witdigital display, closed circuit, self monitoringtype. the alarm would be designed to monitorthe line pressure in piping systems.it should be ce and iso 13485 certified. withfour digit notified no. area line pressure alarm 1 gases , isolation valve, supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified.42mm , isolation valve 2 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 28mm , isolation valve 3 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 22mm , isolation valve 4 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 15mm , isolation valve 5 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 12mm , pipeline 1 medical grade copper pipeline ( in mtrs. ) as per en 13348, 12 mm ( od ) x 0.7 mm thickness , pipeline 2 medical grade copper pipeline ( in mtrs. ) as per en 13348, 15 mm ( od ) x 0.9 mm thickness , pipeline 3 medical grade copper pipeline ( in mtrs. ) as per en 13348, 22 mm ( od ) x 0.9 mm thickness , pipeline 4 medical grade copper pipeline ( in mtrs. ) as per en 13348, 28 mm ( od ) x 0.9 mm thickness , pipeline 5 medical grade copper pipeline ( in mtrs. ) as per en 13348, 42 mm ( od ) x 1.2 mm thickness , hospital sheet patient bedtype iii with mattress overall sizes: ( l ) 2268 mm x ( w ) 922 mm x ( h ) 610 mmdescription: sheet bed should be a plain bed used in the recovery ward.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board / leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral whiteperformance specifications: maximum patient load should be 135 kgthickness mattress: 3+sandwitchconstruction: round corners yeshitlon thickness ( mm ) : 60hitlondensity ( gm / dcm3 ) : 23coir ( both side ) thicknessmm: 20density ( gm / dcm3 ) : 70, drc ( % ) : 22quilting combination / layers:pilled foam – quilting ( one side ) thicknessmm 14pilled foam density gm / dcm3 18pu foam / epe sheet side walling thicknessmm 3total mattress thickness mm 87rexine ( gsm ) : 150note: * finish product thickness should be measure from outer to outer surface. tolerance +5 mm , paediatric bed with mattress paediatric bed of overall sizes in mm: 1500 ( l ) x 850 ( w ) x 1210 ( h ) flat single section bed with grille frame on 4 sides.suitable for children up to 12 years.drop down grill frame on both sides for protection of the patient.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board / leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral white , bed side locker type i over all dimension :402mmlx422mm wx840mm ht .locker should have one cabinet and one drawer unit .both provided with cam lock .there should be gap between drawer and unit to keep general items for frequesnt use castors are provided for easy handling .drawer made up of crca sheet 1 mm thick and has ball slide for easy operation .top ss 304 sheet 0.8 mm thick castors 50 mmdia , hamdle abs ..powder coating of epoxy polyester , medicinetrolleytype i overall size902mm ( l ) x532mm ( w ) x915mm ( h ) .top shelf should be made of ss 304 sheetof 1 mm thick. supporting legs made of ss304 tubesection 30.30 mm dia.of 1.2 mm thick provided to suppoort the entire structure.ss 304 tube provided at the bottom for placement of instument being used .handle made up of ss 304 tubeof dia dia 16 mmand thickness 1.2 mm provided to handle trolley .and maneuver accordingly. high endurance anti static plastic injection moulded castors of 125 mm dia.ss should be finished in glossy mirror finish. max load capacity of 10 kg / shelf udl , round stooltype i overall sizes diagonal legdia 538 mmh470 min 655max.ss 202 made sheet with spin section of thickness 1mm & should be non corrosive. it should have a diameter of 305mm, seat base is made of ms ring and rectangular tube.en8 screw having dia of 22 mm should be used for height adjustment of the seat base.the hub should be made of ms erw tube having dia of 38mm and thickness 2 mm.the hub should be welded with the legs and it should accommodate and cover the lead screw mechanism.the understructure should consist of 4 legs made up ofms erw tube of diameter 25.4 mm and 1.6mm thick. the press formed pipe leg should give a round & clean look. all the legs should be provided with 4 nos of nylon 6 bush.all metal componentsshould be pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbialepoxy polyster powder coating . all welding should be co2 argon welding to minimise rusting on the welding areas.safe working load must be 135kg , strecher on trolley type i 2005mm ( l ) x666mm ( w ) x827mm ( h ) .the trolley should be made of 31.75 and 25.4 mm dia 1.6 mm thick erw tube.holder for stretcher should be made up of mild steel.castor should be of 200 mm dia , diagonal locking castor.stretcher should be made up oferw tubeof dia 25.4 mm and thickness 1.6 mm.top sheet should be made of crca sheetof thickness 1.2 mm with contour shape to accommodate patient.iv pole holder should be made ofms .maximum safe work load should be 135 kg.to ensure qood quality welding co2 argonprocess should be adhered to.all metal componentsshould be pre treated with zinc phosphating in 9 tank porcess and then powder coated with anti microbialepoxy polyster powder coating.goods should be supplied in knocked down construction to reduce carbon emission. performance test :proof loading test , cycle tests , impact test, salt spray test, castor break test, the manufacturer should compilant with iso 9001, 14001, 13485, ohsas 1800 and ce certification. , doctor desk type x s / f / f executive table main desk should be of dimesion : 1350w x 750d x 750h.the table top should bein white cedar, side panelsin black, while the modestypanel ina combination of black & white cedar. side panels : ( black ) made form 18mm thick plt with pvc lipping.modesty panel : made form 18mm thick plt with pvc lipping. bigger upper panel in black and smaller lower panel in white cedar. made from 18mm thick plt with pvc lipping. mobile pedestal : one box and one filing drawer with 18mm thick plb fronts and top. handles : black powder coated die cast aluminum alloy handles. mobile pedestal and hdu are fitted with central lock. , chair type iii s / f / f executive chair1 ) seat / back assembly: the seat and back are made up of 1.2 cm. thick hot pressed plywood, upholstered withfabric upholstery covers and moulded polyurethane foam. the back foam is designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area.high back size : 47.5 cm ( w ) x 69.5 cm ( h ) seat size : 47.0 cm. ( w ) x 48.0 cm. ( d ) 2 ) polyurethane foam: the polyurethane foam is moulded with density = 45 + / 2 kg / m 3and hardness = 20 + / 2at 25% compression. 3 ) armrests: the one piece armrests are injection moulded from black co polymer polypropylene. 4 ) center tilt synchro mechanism : the mechanism is designed with the following features:• 360 revolving type. • upright position locking. • tilt tension adjustment.• seat / back tilting ratio of 1:3 ( 60 seat tilt / 180 back tilt ) . 5 ) pneumatic height adjustment : the pneumatic height adjustment has anadjustment stroke of 12.0 cm. 6 ) telescopic bellow assembly : the bellow is 3 piece telescopic type and injection moulded in black polypropylene. 7 ) pedestal assembly : . , staff / visitor chair type i chair of over all size: 58.0cm ( w ) x 56.5cm ( d ) x 87.5cm ( h ) & 48.0cm ( sh ) seat / back assembly: the seat and back are made from chemically treated and seasoned wood, upholstered with plywood, black leather cloth, and u foam.*back size: 46.0cm ( w ) x 27.0cm ( h ) .*seat size: 46.0cm ( w ) x 40.0cm ( d ) .armrest tube: the armrest tube is made of m.s. e.r.w. tube dia. 2.54cm. ( 1” ) x 16bg thick and powder coated.armrest: the armrest is gas assisted injection moulded from black polypropylene.understructure assembly: the understructure assembly is a cantilever type frame made of dia. 2.54cm. ( 1” ) x 14bg. thick m.s. e.r.w. tube and powder coated. , wheel chair type i ( l ) 790 x ( w ) 600 x ( h ) 870mm.foldable frame structure should be made of section 22diax1.2mm a3 carbon steel with chrome finish. cross bar should be made of a3 carbon steel with section 25.4 x 1.2mm.rear wheel:24 inch solid mag wheels with alloy in the rim .integrated handrim provide to drive the wheel chair of section 16x1.2mm a3 carbon steel with chrome finish.front wheel :8 inch hub made of pa polymer and outer with solid rubber.pu molded arm rest & base should be made of abs for better arm support .leatherite strap for calf rest & leatherite cushion for seat.adjustable alluminimum die cast foot rest with updown & swivel type mechanism.handles should be made of moulded rubber grip to push the wheelchair.hand brakes should be provided to lock the wheelchair at desired location.foot pressextended base with molded plastic for better grip.anti rust chrome finsh. safe work load of100 kg , basin stand type i ht 850 mm ss bowl ms tubular frame of dia 25.4 x1.2 mm tube work mounted on three 50 dia.non rusting castors all without brack. ss part finished with matt polish , kick buckettype i overa all dimension of the bucket should be 517 mm ( l ) x 517 mm ( w ) x 210 mm h.it should made of 12.7 mm dia and 1.6 mm thick ss 304 ring. the bowl should be ss made of .8 mm thck .3 nos 50 mm diahigh endurance plasticinjection moulded castors should be provided for the movement.mx load bearing capacity should be 10 kg. , hospital curtain tracks & i.v. tree system supply installation testing & commissioning of cubical tracks system made of powder coated aluminium alloy, stain free polyster fabric , water repellent curtains , smooth movement , non sticking runnner with stainless steel hooks made from mirror finish stainless steel , adjustable height with all accessories. total quantity : 1...
30458765 bids are invited for pile boring, providing and installation bored cast in situ reinforced cement concrete piles of grade m 25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using direct mud circulation ( dmc ) or bailer and chisel technique by tripod and mechanical winch machine all complete, including removal of excavated earth with all its lifts and leads ( length of pile for payment shall be measured up to bottom of pile cap ) .450mm dia piles ( inclusive of carriage ) , pcc providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering all work up to plinthlevel : 1:3:6 ( 1 cement : 3 coarse sand ( zone iii ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources ) ( inclusive of carriage ) , rcc providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland / portland slag cement, admixtures in recommended proportion as per is: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer in charge; for the following grades of concrete. note: extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re design the mix or bear the cost of extra cement. ( inclusive of carriage ) , brick work brick work with bricks of class designation 100a in foundations and plinthin :cement mortar 1:4 ( 1 cement : 4 coarse sand ) ( inclusive of carriage ) , sand filing supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. ( inclusive of carriage ) with lead upto 3 km , shuttering centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete , steel steel reinforcement for r.c.c. work ready to use cut and bend rebars of approved make from factory / workshop to construction site including placing in position and binding all complete thermo mechanically treated bars of grade fe 500d or more. , plinth protection making plinth protection 50mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand ( zone iii ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources ) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. , door & window providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, paneling and dash fasteners to be paid for separately ) :powder coated aluminium ( minimum thickness of powder coating 50 micron ) , glass providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) :with float glass panes of 5 mm thickness ( weight not less than 12.50 kg / sqm ) , upvc door providing and fixing of factory made upvc white colour casement door, upvc multichambered extruted frame, sash and mullion profile. frame duly reinforced with 1.2mm gi section box tpe chamber and sash with 1.5mm thick gi section ( ± 0.2mm ) based on wind load calculations ( shape and size according to upvc profiles ) , appropiate dimentions of upvc extruded glazing bead, epdm gasket ( k / o type ) , seperate drainage system, ss34 grade friction hinges 2d / 3d plate hinges, zinc alloy ( white powder coated ) casement handle, gi fastener 8x100 mm size for fixing frame to finish wall, plastic packer and caps and necessary steel screws etc.profile of frame and sash shall be metered cut and fusion welded at all corners, mullion shall be also fusion welded / joined mechanically including drilling of holes for fixing hardware and drainage of water etc. after fixing of frames , gap between frame and adjascent wall shall be filled with pu foaam / backer rod required size and the approved quantity. after that sealed with weather proof silicon sealant at both side, all complete as per approved drawing and direction of eic , door closer providing and fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ) , with necessary accessories and screws etc. complete. , door providing and fixing isi marked flush door shutters conforming to is : 2202 ( part i ) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including stainless steel butt hinges wirhnecessary screws , door stopper providing and fixing aluminium hanging floor door stopper, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour and shade, with necessary screws etc. complete. single rubber stopper , solling providing designation 100 a one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as perbuilding specification and direction of e / l, , tile 1 providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm , tile 2 providing and laying ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including pointing the joints with white cement and matching pigment etc., complete. , tile 3 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. , granite providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge :flamed finish granite stone slab jet black, cherry red, elitebrown, cat eye or equivalent. , false ceiling providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance ( rh ) of 99%, light reflectance ? 85%, thermal conductivity k = 0.052 0.057 w / m k, fire performance as per ( bs 476 pt 6 &7 ) in true horizontal level suspended on interlocking t grid of hot dipped all round galvanized iron section of 0.33 mm thick ( galvanized @120 gsm ) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item ( galvanised@80gsm ) 50 mm long 8mmouter diameter m 6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘t’ , pre fabsteel designing, providing, installing and fixing factory finished custom designed cold form light gauge steel framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. the steel sheet shall be galvanized ( az 150gms aluminium zinc alloy coated steel having minimum yield strength 300 550 mpa ) conforming to aisi specifications and ibc 2009 for cold formed steel framing and construction and also as per is: 875 1987, iso 800 1984 and is:801 1975. the wind load shall be as per provisions of is 875 ( part iii ) . lgsfs frame shall be designed as per is: 801 using commercially available software such as frame cad pro 11.7 / staad pro v8i / architekv2.5.16 / revit architecture 2011 or equivalent. proper usage of connection accessories like heavy duty tension ties, light duty hold ons, twist straps ( to connect truss with wall frames ) , strong tie, tie rod, h brackets, boxing sections, l shaped angles for better structural stability. the framing section shall be cold form c type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple / slot at required locations as per approved drawings. , pre fabwall providing and fixing of external wall system on light gauge steel frame work with outer face cement boards as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make. a groove of 2 mm to 3mm shall be maintained and grooves shall be sealed with silicon based sealant. the board shall be fixed in a staggered pattern. screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm and. internal face 12.5 mm thick gypsum plaster board fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. ( cost of frame work to be paid for separately ) outer face: outer face having 6mm thick fiber cement board fixed on 9mm thick fiber cement board, type a, as per is:14862:2000 ( high pressure steam cured ) inner face : 12.5 mm thick gypsum plaster board conforming to is 2095:2011 fixed on 8 mm thick fibre cement board confirming to is:14862:2000 of type b ( high pressure steam cured ) , pre fabin. wall providing and fixing internal wall panels on light gauge steel frame work with 12.5mm thick gypsum plaster board conforming is 2095:2011 fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make, screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. ( cost of frame work to be paid for separately , roof sheet supply & installation of precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by engineer in charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55mm ) with epdm seal or with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. , ridge plain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : ridges plain ( 500 600mm ) . , gutter drain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : gutter , flashing providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 5% total coated thickness ( tct ) , zinc coating 120gsm as per is: 277 in 240mpasteel grade, 5 7 microns epoxy primer on both side of the sheet and polyester topcoat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumenwashers complete :flashings / aprons. ( upto 600 mm ) , under deck insulation providing and fixing thermal insulation of ceiling ( under deck insulation ) with resin bonded rockwool conforming to is: 8183, density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to ceiling with metallic cleats ( 50x50x3 mm ) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. , resin bonded rock wool providing and fixing thermal insulation with resin bonded rock wool conforming to is: 8183, having density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to wall with screw, rawel plug & washers and held and in position by criss cossing gi wire etc. complete as per directions of engineerin charge. , face panel providing and fixing in all exterior face panels breathable vapour barrier underneath the cementfiber board as per national building code 2009 complete as per direction of engineer in charge. , lap siding supplying and installation of moisture resistant / fire resistantlap siding 8 mm thick and width as per standard sizes made ofiber cement board with embossed decorative finish to give pleasing exterior fixed horizontally with staggered joints including minimum over lapof 32 mm external cement fibre boardconforming to is 14862:2000 offixed with self drilling / taping screws / fastners of approved make. , putty providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distemper distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1 new work ( two or more coats ) over and including water tinnable priming coat with cement primer , ex. paint finishing walls with textured exterior paint of required shade : new work ( two or more coats applied @ 3.28 ltr / 10 sqm ) over and including priming coat of exterior primer applied @ 2.20kg / 10 sqm sqm , oil paint painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work . , steel 1 steel work in built up tubular ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. hot finished welded type tubes , excavation earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan ) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. , road providing and laying c.c. pavement of mix m 25 with ready mixed concrete from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc.complete as per specifications and directions of engineer in charge. ( the panel shuttering work shall be paid for separately ) . ( note: cement content considered in this item is @ 330 kg / cum. excess / less cement used as per design mix is payable / recoverableseparately ) . , paver block providing and laying 60 mm thick factory made cement concrete interlocking paver block of m 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thickcompacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer in charge. , phe 1 providing & fixing stone slab table rubbed, edges rounded and polished of size 75 x 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste 6mm nominal size ) as per engineer in charge and finished smooth white agaria marble stone , phe 2 providing and fixing salem stainless steel a isi 304 ( 18 / 8 ) kitchen sink as per is: 13983 with ci brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. kitchen sink with drain board510x1040mm bowl depth 200mm. , phe 4 providing and fixing mirror of superior glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing:rectangular shape 453x357 mm , phe 5 providing and fixing toilet paper holder:c.p. brass , phe 6 providing and fixing water closet squatting pan ( indian type w.c.pan ) with 100 mm sand cast iron p or s trap, 10 litre low fixturescomplete, including cutting and making good the walls andlevel whitep.v.c. flushing cistern, including flush pipe, with manually controlleddevice ( handle lever ) conforming to is : 7231, with all fittings andfloors wherever required :white vitreous china orissa pattern w.c. pan of size580x440 mm with integral type foot rests , phe 7 providing and fixing white vitreous china pedestal type water closet ( european type w.c. pan ) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device ( handle lever ) , conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : w.c. pan with isi marked white solid plastic seat and lid , phe 8 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer in charge , phe 9 providing and fixing cp brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge.. ( sink & urinal ) , phe 10 providing & fixingptmt towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealedfittings arrangement of approved quality and colour weighing not less than 88 gms , phe 11 providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms.15mm nominal bore , phe 12 providing and fixing c.p. brass bib cock of approved quality confirming to is:893115mm nominal bore , phe 13 providing and fixing c.p.brass angle valve for basin mixer and geyser points of approved quality conforming to is 8931 a ) 15 mm nominal bore.15 mm nominal bore , phe 14 providing and fixing wash bashin with c.i. brackets, 15mm dia cp brass singal hole basin mixer of approved quility and make, including painting of fittings and brackets, cutting and making good the walls wherever required white vitreous china surgeon type wash basin of size 660x460 mm with a pair of 15 mm c.p. brass pillar taps with elbow operated levers , phe 15 providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption ) , having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of engineer in charge.. , phe 16 providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. , phe 17 providing and fixing white vitreous china laboratory sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p brass waste and 40mm c.p. brass trap with necessary c.p. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :size 600x450x200 mm , phe 18 providing and fixing cp brass single lever telephonic wall mixer of quality & make as approved by engineer in charge . a ) 15 mm nominal dia. , phe 19 providing and fixing cp brass shower rose with 15 or 20 mm inlet100 mm diameter , phe 20 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. , phe 21 providing and fixing ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. , phe 22 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. ( internal work ) 40 mm dia, nominal bore , phe 23 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. ( internal work ) 50 mm dia, nominal bore , phe 24 two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand andmanufacturetwo more coast on new work , phe 25 p / f m.s. cap 100 mm dia , phe 26 providing and fixing, upvcpipes 6 kg / cm2 ( is: 4985 ) including all fittings ( plain or door ) e.g. bends, junction, offsets, access pieces, jointing with rubber ring / solvent cement joints includingrequired suports, cutting chase or holes in walls and floors and making good where required.75 mm dia pipe , phe 27 providing and fixing, upvcpipes 6 kg / cm2 ( is: 4985 ) including all fittings ( plain or door ) e.g. bends, junction, offsets, access pieces, jointing with rubber ring / solvent cement joints includingrequired suports, cutting chase or holes in walls and floors and making good where required.110 mm dia pipe , phe 28 providing & fixing on wall face unplasticised rigid pvc rain water pipes conforming to is:13592 tyape a included jointing with seal ring conforning to is:5382 leaving 10 mm gap for thermal expansion. ( i ) single socketed pipes.110 mm diameter , phe 29 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. coupler 110 mm diameter , phe 30 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. bend 87.5 deg 110 mm diameter , phe 31 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. shoe 110mm shoe , phe 32 providing & fixing unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50mm hard wood plugs, screwed with .m.s. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1cement : 4 coarse sand ) and making good the wall etc. complete.110 mm dia , phe 33 providing and fixing cpvc pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 20 mm nominal outer dia pipes , phe 34 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 25mm dia, nominal bore , phe 35 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 32 mm dia, nominal bore , phe 36 providing and fixing gun metal non return valve of approved quality ( pn 1.6 ) 40 nominal bore , phe 37 providing and fixing brass stop cock of approved quality15mm nominal bore , ex. phe 6 providing 250mm wide brick drain in cement mortar ( 1:6 ) with av. 150mm.clear depth and 250mm apron including cost of e / w. involved with 75mmcement concrete ( 1:4:8 ) over one brick designation 100 a flat soling inproper grade and slope at the base.the drain duly.plastered in cm. ( 1:3 ) with punning over exposed surface all complete as per buildingspecification and direction of e / l, , ex. phe 7 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil ( hard or soft ) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [ hard / dense soil ] pipes, cables etc.exceeding 80mm dia.but not exceeding 300mm dia. , ex. phe 8 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil ( hard or soft ) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [ hard / dense soil ] pipes, cables etc.exceeding 80mm dia. exceeding 300mm dia. , ex. phe 9 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 250 mm dia rcc pipe , ex. phe 10 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 300 mm dia rcc pipe , ex. phe 11 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 450 mm dia rcc pipe , ex. phe 12 inside size 120x90 cm and 90 cm deep including c.i. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg ) :with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , ex. phe 13 providing and fixing square mouth sw gully trap grade ‘a’ complete ci grating brick masonry chamber with bricks of class designation 75 and water tight ci cover with frame of 300 x 300 mm size ( inside ) the weight of cover to be not less than 13.00 kg and frame to be not less than 5 kg. as per standard design. ( cover min. 4.5 kg & frame min.2.7 kg ) 180x150 mm size p type with fps bricks , ex. phe 14 constructing masonry chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement:4 coarce sand ) for stop cock complete with c.i. surface box 100x100x75mm ( inside ) with locking arrangement and rcc top slab 1:2:4 mix ( 1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size ) necessary excavation foundation concret 1:5:10 ( 1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortor 1:3 ( 1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design. , ex. phe 15 constructing masonry chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement: 4 coarse sand ) for sluice valve, with c.i. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with channel lid and rcc top slab 1:2:4 mix ( 1 cement: 2 coarse sand: 4 graded stone sggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement: 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design:with f.p.s. bricks , ex. phe 16 structual steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , ex. phe 17 making connection of gi distribution branch with gi main of 50 80mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete. , rain water harvesting 1 boring / drilling bore well of required dia for casing / strainer pipe, bysuitable method prescribed in is:2800 ( part i ) , including collecting sample from different strata , preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , rain water harvesting 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , rain water harvesting 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150 mm nominal size dia , rain water harvesting 4 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 5 supplying, filling, spreading & levelling gravel of size range 5mm to 10mm, in recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 7 providing and fixing bail plug / bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 ( part i ) . 100 mm dia , rain water harvesting 8 making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , rain water harvesting 9 constructing soak pit 1.20x1.20x1.20 m filled with brickbats including s.w. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , tubewell 1 boring / drilling bore well of required dia for casing / strainer pipe, bysuitable method prescribed in is:2800 ( part i ) , including collecting sample from different strata , preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , tubewell 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , tubewell 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100mm nominal size dia , tubewell 4 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100 mm nominal size dia , tubewell 5 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , tubewell 6 providing and fixing bail plug / bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 ( part i ) . 100 mm dia , submersible pump 35m deep boring with casing and pipe. supply of pipe etc supplying & installation of suitable 2hp submersible pump b.s or k.s.bor equivalent make with finolex cable 1x3x2.5 squmm ( upto 50mtr ) withflexible conduit 25mm dia, electrical out door pannel with required electrical fitting such as mcb of 0 25amp ( havell or indocopp or mds make ) , volt & ampere meter ( ae make ) , single phase preventer ( minilac or vsp 1 make ) starter ( l&t or bch make ) etc of approved make, 40mm hdpe pipe ( 25 mtr ) and all accessories complete as per requirement of site. , water purifier and cooler fitting and fixing single faucet storage type water cooler ( size 461 mm wide x 582 mm deep x 1217 mm height, weight 46 kg ) fully stainless body having storage capacity of 40 ltrs, cooling capacity of 40 ltrs. / hr. with hermetic type compressor, gas cooled motor equipped with over load protector, condensor for propeller type, thermostat autometically controlled temperature, refrigerent r 22, 230 volt, single phase 50 hertz, maximum current 2.3 amp including plug top and electrical lead wire connection upto 3 metres from the cooler, water inlet and drain out connections complete in all respects of voltas model no 40 / 40 tushar pss type or similar type of approved make. , water purifier and cooler 1 fitting and fixing water purifier for drinking purpose of capacity 6 litres / min, 5 purification system with reverse osmosis system with ultra ventilated membrane, tds500 to 2000 mgl / ppm, auto shut off with microswitch float manual flush facility, tds reduction 90% having automatic backwash system with filteration unit along with all accessories including plug top and electrical lead wire connection upto 3 metres from the purifier, water inlet and drain out connections complete in all respects similar to aquaguard or similar approved make ( model aquasure elegant ro water purifier of size width 360 mm x height 430 mm x depth 235 mm and weight 8.5 kg ) . , fire extinguisher 1 providing and fixing carbon di oxide type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. capacity 4.5 kg. , fire extinguisher 2 providing and fixing abc powder type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.capacity 6.0 kg. , electrical 1 wiring for light point / fan point / exhaust fan point / call bellpoint with 1.5 sq.mm frls pvc insulated copper conductorsingle core cable in surface / recessed steel conduit, withmodular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group c , electrical 2 wiring for twin control light point with 1.5 sq.mm frls pvcinsulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required. , electrical 3 wiring for group controlled ( looped ) light point / fan point / exhaust fan point / call bell point ( without independent switch etc. ) with 1.5 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, and earthing the point with 1.5 sq. mm frls pvc insulatedcopper conductor single core cable etc. as required. group c , pvc conduit 1 supplying and fixing of following sizes of medium class 20mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 2 supplying and fixing of following sizes of medium class 32mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 3 supplying and fixing of following sizes of medium class 50mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , electrical 4 wiring for light / power plug with 2x4 sq. mm frls pvcinsulated copper conductor single core cable in surface / recessed conduit alongwith 1 no. 4 sq. mm frls pvcinsulated copper conductor single core cable for loop earthingas required. , wiring frls pvc insulated copper conductor 2 x 2.5 sq. mm. + 1 x 2.5 sq. mm. earth wire , wiring frls pvc insulated copper conductor 1 2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire , wiring frls pvc insulated copper conductor 2 4 x 6 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 3 4 x 10 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 4 4 x 16 sq. mm + 2 x 16 sq. mm earth wire , s / f, gi box along with modular base & cover plate 1 or 2 module ( 75mm x 75mm ) , s / f, gi box along with modular base & cover plate 1 3 module ( 100mm x 75mm ) , s / f, gi box along with modular base & cover plate 2 4 module ( 125mmx75mm ) , s / f, gi box along with modular base & cover plate 3 6 module ( 200mm x 75mm ) , s / f, gi box along with modular base & cover plate 4 12 module ( 200mmx150mm ) , s / f modular switch / socket on the existing modular plate 5 / 6 amps switch , s / f modular switch / socket on the existing modular plate 1 15 / 16 amp switch , s / f modular switch / socket on the existing modular plate 2 3 pin 5 / 6 amp socket outlet , s / f modular switch / socket on the existing modular plate 3 6 pin 15 / 16 amp socket outlet , s / f modular switch / socket on the existing modular plate 4 telephone socket outlet , s / f modular switch / socket on the existing modular plate 5 tv antenna socket outlet , s / f modular switch / socket on the existing modular plate 6 bell push , electrical 5 supplying & fixing suitable size gi box wih modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, “c” curve including connections, painting etc. as required. ( for ac / geyser ) , electrical 6 supplying and drawing co axial tv cable rg 6 grade, 0.7 mm solid copper conductor pe insulated, shielded with fine tinned copper braid and protected with pvc sheath in the existing surface / recessed steel / pvc conduit as required. , electrical 7 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. , electrical 8 providing and fixing m.s. fan clamp type i or ii of 16 mm dia m.s. bar, bent to shape with hooked ends in r.c.c. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as required. , electrical 10 supplying and fixing 20 a, 240 v, spn industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 a c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. , electrical 11 supplying and fixing 20 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 12 supplying and fixing 30 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 13 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 8 way , double door , electrical 14 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 12 way , double door , electrical 15 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 16 way, double door , electrical 16 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 6 way ( 4 + 18 ) , double door , electrical 17 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 8 way ( 4 + 24 ) , double door , electrical 18 supplying and fixing of following ways surface / recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs ( but without mcbs and incomer ) as required . ( note : vertical type mcb tpdb is normally usedwhere 3 phase outlets are required. ) 4 way ( 4 + 12 ) , double door , 40 a, rccb supplying and fixing following rating, double pole, ( single phase and neutral ) , 240 v, residual current circuit breaker ( rccb ) , having a sensitivity current 30 ma in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a mcb supplying and fixing 40 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 40 tp mcb , single pole mcb supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 63a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 100a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , l / f pvc sheathed / xlpe power cable in trench laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 95 sq. mm and upto 185 sq. mm , l / f pvc sheathed / xlpe power cable in trench 1 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm , l / f pvc sheathed / xlpe power cable over cable tray 2 upto 35 sq. mm ( clamped with 1mm thick saddle ) , l / f pvc sheathed / xlpe power cable over cable tray 3 above 35 sq. mm and upto 95 sq. mm ( clamped with 25x3mm ms flat clamp ) , l / f pvc sheathed / xlpe power cable over cable tray 4 above 95 sq. mm and upto 185 sq. mm ( clamped with 25 / 40x3mm ms flat clamp ) , l / f pvc sheathed / xlpe power cable over cable tray 5 above 185 sq. mm and upto 400 sq. mm ( clamped with 40x3mm ms flat clamp ) , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3.5c x 300 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 1 3.5c x 240 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 2 3.5c x 120 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3 3.5c x 95 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 4 3.5c x 50 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 5 4c x 35 sqmm aluminium conductor cable a2xfy , cable tray 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 100 mm width x 50 mm depth x 1.6 mm thickness , cable tray 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 300 mm width x 50 mm depth x 1.6 mm thickness , cable tray 3 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 600 mm width x 62.5 mm depth x 2.0 mm thickness , cable tray “bends” supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.100 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.150 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.300 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends”3 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.450 mm width x 50 mm depth x 2 mm thickness , cable tray “bends” 4 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.600 mm width x 62.5 mm depth x 2.0 mm thickness , mv cable supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 300 sqmm, aluminium conductor cable a2xfy , mv cable 1 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 240 sqmm, aluminium conductor cable a2xfy , mv cable 2 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 120 sqmm, aluminium conductor cable a2xfy , mv cable 3 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 95 sqmm, aluminium conductor cable a2xfy , earthing 1 earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required. , earthing 2 earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. , earthing 3 earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. , earthing 4 providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required. , earthing 5 providing and fixing 25 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required. , earthing 6 providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required. , earthing 7 providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for connections etc. as required. , fiting & fixtures 1 supply and installation of regular / standard model a.c. ceiling fan of 1400 mm sweep including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq. mm fr pvc insulated copper conductor etc as required. , fiting & fixtures 2 supplying and fixing single wall mounted 18 / 22 watt led type batten fitting complete with electronic driver and led tube etc directly on wall / ceiling includingconnections with 1.5 sq.mm fr pvc insulated copper conductor and earthing the body etc. as required. , fiting & fixtures 3 supply installation and comissioning ofintegrated batten made ( 2ft ) of ultra slim co extruded polycarbonate channel with housing part in white finish & diffuser part in reeded opal finish.white finish abs end caps with decorative circular coloured polycarbonate cap snap fitted on the end cap to enhance the aesthetic of the fixture. these end caps are snap fitted to the fixture.high efficiency long life led with lumen efficacy of 130 lm / w with viewing angle of 120º.powered by an integral isolated low thd electronic led driver ( smps based constant current supply ) with output short circuit protection, surge protection.can be fixed directly into the wall / ceiling by means of mounting ss clips provided with the fixture. ip 20, lumen output of 950 lumens with system efficacy of > 105lm / w .cri >80, color temperature 6500k, thd <20% and pf>0.95, ip20 . life class of 35, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz;internal surge protection:3 kv; protection including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. : , fiting & fixtures 4 supplying and fixing recess mounted 12 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 5 supplying and fixing recess mounted 18 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 6 supply, installation, testing and commissioning of 400 mm sweep, 65w, blade material aluminium blades , speed & oscillation 3 speed, pull cord for speed and oscillation.air delivery minimum 72 m³ / min, speed minimun 1350 revolution per minute.suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. , fiting & fixtures 7 supply installation and comissioning of 28w 2x2 panel recess mounting luminaire with high performance leds, suitable for mounting with armstrong / grid ceiling.crca powder coated white after phosphochromate treatment.high efficiency long life led package in integral module with lumen efficacy of >100 lm / w and viewing angle of 120° to ensure better uniformity.powered by an independent isolated, selv output electronic led driver ( smps based constant current supply ) with output short circuit protection, surge protection & other reliability test. lumen output of 3450 lumens.cri >80, color temperature 5700k, thd <10% and pf >0.95, ip20, ik03.life class of 50, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz;internal surge protection:3 kv; protection including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. : reverse polarity, open & short circuit. driver safety requirement standards :is 15885 2 13, test report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source.cat ref havells :venusneohe2x2plr128wled857 or approved equivalent. , fiting & fixtures 8 supplying installation testing & commissioning ofb22 based 9w led 3 star bulb with 850 lumen, 6k color temperature including holder. , fiting & fixtures 9 supplying installation testing & commissioning of black painted extruded aluminium housing. green / red led’s mounted inside the housing. laser engraved signage matter on single / double acrylic sheet fixed on one side suitable for wall / ceiling / suspension type single / double sided display. in double sided version black paper is inserted. ni cd battery back up to 2 hrs. ( charged up to 8 10 hrs ) .mounting strings provided for pendent mounting operating voltage 150 280v ac ambient operating temperature. – 0 to 450c ingress protection – ip42.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. 220208 besl 03 led ssd wbb green 240 3 8wor220209 besl 03 led ssd wbb red 240 3 8wor220210 besl 03 led dsd wbb green 240 3 8wor220211 besl 03 led dsd wbb red 240 3 8w , fiting & fixtures 10 supply, installation, testing & erecting of ip66 bulkhead surface type lighting fixture 10w made up of pressure die cast aluminium housing and polyster powder coated die cast aluminium with high quality polycarbonate diffuser in opal finish for glare free light distribution.high efficiency long life led module with smd led package mounted on mcpcb with lumen efficacy of >95 lm / w with system lumen 950. powered by integral electronic led driver with apfc with low thd output short / open circuit protection. cct 5700, cri>80, system efficacy>90lm / w, thd<15%, pf>.95, ip66, ik 10, life class of 50, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. cat ref: havells : hexaft10wled857ssymbopc or approved equivalent. , civil & misc works1 providing and fixing m.v. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works2 providing and fixing h.t. danger notice plate of 250 mm x 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works3 supplying and making cable route marker with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm x 60 cm at the bottom and 50 cm x 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. , civil & misc works4 supplying and fixing cable route marker with 10 cm x 10 cm x 5 mm thick g.i. plate with inscription there on, bolted / welded to 35 mm x 35 mm x 6 mm angle iron, 60 cm long and fixing the same in ground as required. , civil & misc works5 providing & fixing in position 1000 mm wide , electrical insulating rubber mats as per is 15652:2006, 2 mm thick, suitable up to 1.1 kv , fire retardant, no effect of acids, alkalis and transformer oils, moisture proof, high tensile strengthandtexture finish / cloth impression ( anti slip , marking on top ) , civil & misc works6 supply & fixing shock treatment chart duly mounted on a wooden frame with 5 mm thick glass as required ( approx front area 1.20 sq metre ) , 40 kvaups supplying, installation, testing and commissioningof online double conversion fully microprocessor based , indoor type, compact ups system of following rating with igbt based pwm technology to achieve thd < 3% and input power factor of greater than 0.95 at 50% loading, suitable for three phase ac input voltage 380 v to 440 v, 50 hz +3% / 3 % and three phase ac output voltage 415 ± 1% volts & frequency 50 ± 0.5 hz , inbuilt isolation transformer, necessary vrla batteries of suitable size having 30 minutes back up time , mounting rack including and suitable size connecting cable ( for ups to battery and battery to battery ) , static and maintenance bypass switch, snmp card for rs232 / ethernet ip computability for operation and monitoring etc. with all components as mentioned , specifications, complete as required.note : concerning vendor needs to furnish the battery sizing calculations at the time of ga approval and battery size has to be as per the approved ga drawing. , external lighting 1 supply and erection of 4 metre height hot dipgalvanized octagonal street light pole with followingarm with top dia 70 mm and bottom dia a / f 130 mm, made of 3 mm thick sheet along with base plate of size220 x 220 x 12 mm , small door opening for junctionbox mounting with mcb & connector, cement concreteof 1:3:6 including excavation, refilling and suitable sizefoundation bolts with template and all complete jobasrequired. ( but without pole collar ) single arm , external lighting 2 supplying and fixing 40 / 45 watt led type street lightwith die cast aluminium housing for ingress protectionof ip65 and complete with all accessories etc, onpole / building including connection with fr pvcinsulated copper conductor cable and earthing thebody etc. as required. , ip based cctv system 1 sitc of 2 megapixel @ 25fps, h.265 ip bullet camera, 1 / 2.9 cmos with 2.8~12mm varifocal lens, 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 2 sitc of 2 megapixel @ 25fps, h.265 ip dome camera, 1 / 2.9 cmos with 3.6 fixed mm 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 3 sitc of 2 megapixel @ 25fps, ptz camera h.265 ip dome camera, 1 / 2.9 cmos with 2.6 fixed lenslux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 4 sitc of 32ch 4k ivr , h.265 / h.264 • 1080p real time • 4k display • dual lan • 8x hdd • raid •web plugin free h.265 / h.264 compression technology 4k display for clear monitoring up to 1080p 16ch decoding ability smart search ii smart vca event searchsupport raid 0, 1, 5 supported to prevent from recording data loss browsers supported: ie , smart functions : target count, electric fence, face detection, humaniod detection, retrograde detection, leave position detectio output, local & network backup etc. complete as required. , cctv 5 sitc of harddiskdrive8tb, 24 / 7surveillance category only complete etc as required.etc.all complete , cctv 6 sitc of 55 led narrow bazel for monitoring for nvr server etc. all complete. , cctv 7 sitc of rj 45 outlets near the cameras etc. all complete. etc. all complete. , cctv 8 sitc of cat 6 patch cords 1 meter high quality four pair twisted stranded cable terminated with rj45 modular plugs at both the ends. , signage 1 providing & fixing of building direction signage mounted on pole, with pole of 100x100mm shs ( square hollow section ) of height of 5600mm, and sign size of 900x1050, sign made of aluminiu c section of 60mm with internal framing to support the frame in ms tubes hollow section, frame work duly painted with anti rust coatings, with facia of 3mm thick exterior grade aluminium composite panel, cladded with uv cured digital printed retroreflective sheet of 3m make, and back panel of 3mm exterior grade acp, all pipes to be painted in approved color. cost shall includecost towards installation, including excuvation and filling up with specified pcc and fixing of foundation bolts as specified, also it shall include the designing charges.all complete as per direction by engineer in charge. , signage 4 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge , wall projected 250x210mm, both sides , signage 5 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge, door mounted, 300x80mm , 2 tr air conditioning 1 split ac ( inverter model ) : supply, installation, testing, commissioning of split type wall mounted air conditioning units of following capacity including inddor, outdoor unit fitted with inverter based rotary compressor fitted with rotary compressor, copper condensor and first charge refrigent r410a / eco friendly green gas only, all complete including all electrical connections to the electrical power supply system of the building, includingbut not limited to supply of all electrical plugs, etc., as necessary, lengthening of all electrical wires of ac units ( both indoor and outdoor ) , drain pipe andincluding suitable voltage stabilisers, etc. so as to place them in a concealed manner in the desired position. the copper pipes and electrical cables shall be concealed in approved manner and neatly run in straight lines in a workman like manner with proper supports. complete supply and installation of split2 tr star rating 3 star , refrigerant piping copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 25 mm od, wall thickness >= 1.2 mm ( insulation 19 mm thick ) , refrigerant piping 1 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 19.1 mm od, wall thickness >= 1.0 mm ( insulation 13 mm thick ) , refrigerant piping 2 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 15.9 mm od, wall thickness >= 0.8 mm ( insulation 13 mm thick ) , refrigerant piping 3 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 9.5 mm od, wall thickness >= 0.8 mm ( insulation 13 mm thick ) , drain piping providing and fixing of cpvc 6 kg / cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 20 mm , drain piping 1 providing and fixing of cpvc 6 kg / cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 32 mm , main oxygen manifold supply, installation, testing and commissioning of following gas manifold system ( excluding cylinders ) . the manifold is configured for designed numbers of cylinders and is suitable to withstand a pressure of 145 kg / cm2, along withhigh pressure copper annealed tail pipes with end brass adapter suitable for cylinders and manifold. top frame comprising of high pressure copper pipes of size 1 / 2” nb x 15swg with high pressure brass fittings made of high tensile brass and connections through nonreturn valves, the design of middle and bottomframes is provided to fit both round and flat bottom cylinders safely. the manifold is tested ( hydraulically ) at 3500 psig. ( it should be ce and iso 13485 certified ) mani fold oxygen manifold 6 + 6 cylinder banks complete with nrv, middle frame, bottom frame with ce marked, , emergency manifold emergency oxygen manifold 01 + 01 cylinder emergency manifold with complete regulator, nrv, middle frame & bottom frame, , control panelfor oxygen fully automatic three port control panel for oxygen supply, installation, testing and commissioning of automatic manifold control panel would provide a duty or standby gas supply from two cylinder banks with automaticchangeover the manifold indicates local status and has a remote indicator facility. automaticmanifold control panel would be designed to supply the mgps with a constant pressure supply via a control panel form two equal banks of cylinders and the changeover from the ‘duty’ to the ‘standby’ bank of cylinders would beautomatic. automatic changeover from the duty to the standby bank would occur at a cylinder pressure that will ensure the maximum usage of the contents of the duty bank. the changeover unit would be provided with monitoring todetect and display: duty bank operating, duty bank empty, standby bank operating, and standby bank below 10 % when the duty bank is empty, reserve bank low, pipeline pressure fault. there would be facility to connect liquidoxygen supply ( i.e. three port control panel ) ( it should be ce and iso 13485 certified ) fully automatic three port control panel for oxygen , emergency manifold line regulator emergency manifold line regulator supply, installation, testing and commissioning of emergency manifold line regulator i n p u t p r e s s u r e 1 5 0 k g / c m 2 working pressure 4 kg / cm2 it should be ce and iso 13485 certified.oxygen input pressure 150 kg / cm2 working pressure 4 kg / cm2capacity : 1500 lpm , cylinderconnectingpipe ( pig tail ) supply, installation, testing and commissioning of cylinder connecting pipe ( pig tail ) made up of flexible ss hose with safety cord 5 / 8 inch bsp gland nut and one side 1 / 2 inch bsp internal threads having one meter length. ( oxygen 24 , n2o 10, co2 4 ) , backpressurecompensated [ bpc ] oxygen flowmeter supply, installation, testing and commissioning of back pressure compensated [ bpc ] oxygen flow meter body should be made of brass material dully chrome plated and graduated from 0 15 l / m on an expanded lower scale forprecision setting at low flow and 5 15 l / m for general use. the humidifier bottle should be made up of unbreakable polycarbonate / polysulphone material and autoclavable at 121 degree centigrade temperature. it should be ceand iso 13485 certified. , oxygen gas outletfront loadeddin / bsstd gas outlet front loaded din / bs std:supply, installation, testing and commissioning of din / british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din / british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din / bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , medical air ( 4 bar ) outletfront loadeddin / bsstd gas outlet front loaded din / bs std:supply, installation, testing and commissioning of din / british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din / british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din / bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , quickconnectadapter din / british standard quick connect oxygen adapter ( safety probe ) , tube oxygen h.p. rubber tube white color, , alarm supply, installation, testing and commissioningof area pressure alarm panel would be witdigital display, closed circuit, self monitoringtype. the alarm would be designed to monitorthe line pressure in piping systems.it should be ce and iso 13485 certified. withfour digit notified no. area line pressure alarm 1 gases , isolation valve, supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified.42mm , isolation valve 2 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 28mm , isolation valve 3 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 22mm , isolation valve 4 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 15mm , isolation valve 5 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 12mm , pipeline 1 medical grade copper pipeline ( in mtrs. ) as per en 13348, 12 mm ( od ) x 0.7 mm thickness , pipeline 2 medical grade copper pipeline ( in mtrs. ) as per en 13348, 15 mm ( od ) x 0.9 mm thickness , pipeline 3 medical grade copper pipeline ( in mtrs. ) as per en 13348, 22 mm ( od ) x 0.9 mm thickness , pipeline 4 medical grade copper pipeline ( in mtrs. ) as per en 13348, 28 mm ( od ) x 0.9 mm thickness , pipeline 5 medical grade copper pipeline ( in mtrs. ) as per en 13348, 42 mm ( od ) x 1.2 mm thickness , hospital sheet patient bedtype iii with mattress overall sizes: ( l ) 2268 mm x ( w ) 922 mm x ( h ) 610 mmdescription: sheet bed should be a plain bed used in the recovery ward.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board / leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral whiteperformance specifications: maximum patient load should be 135 kgthickness mattress: 3+sandwitchconstruction: round corners yeshitlon thickness ( mm ) : 60hitlondensity ( gm / dcm3 ) : 23coir ( both side ) thicknessmm: 20density ( gm / dcm3 ) : 70, drc ( % ) : 22quilting combination / layers:pilled foam – quilting ( one side ) thicknessmm 14pilled foam density gm / dcm3 18pu foam / epe sheet side walling thicknessmm 3total mattress thickness mm 87rexine ( gsm ) : 150note: * finish product thickness should be measure from outer to outer surface. tolerance +5 mm , paediatric bed with mattress paediatric bed of overall sizes in mm: 1500 ( l ) x 850 ( w ) x 1210 ( h ) flat single section bed with grille frame on 4 sides.suitable for children up to 12 years.drop down grill frame on both sides for protection of the patient.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board / leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral white , bed side locker type i over all dimension :402mmlx422mm wx840mm ht .locker should have one cabinet and one drawer unit .both provided with cam lock .there should be gap between drawer and unit to keep general items for frequesnt use castors are provided for easy handling .drawer made up of crca sheet 1 mm thick and has ball slide for easy operation .top ss 304 sheet 0.8 mm thick castors 50 mmdia , hamdle abs ..powder coating of epoxy polyester , medicinetrolleytype i overall size902mm ( l ) x532mm ( w ) x915mm ( h ) .top shelf should be made of ss 304 sheetof 1 mm thick. supporting legs made of ss304 tubesection 30.30 mm dia.of 1.2 mm thick provided to suppoort the entire structure.ss 304 tube provided at the bottom for placement of instument being used .handle made up of ss 304 tubeof dia dia 16 mmand thickness 1.2 mm provided to handle trolley .and maneuver accordingly. high endurance anti static plastic injection moulded castors of 125 mm dia.ss should be finished in glossy mirror finish. max load capacity of 10 kg / shelf udl , round stooltype i overall sizes diagonal legdia 538 mmh470 min 655max.ss 202 made sheet with spin section of thickness 1mm & should be non corrosive. it should have a diameter of 305mm, seat base is made of ms ring and rectangular tube.en8 screw having dia of 22 mm should be used for height adjustment of the seat base.the hub should be made of ms erw tube having dia of 38mm and thickness 2 mm.the hub should be welded with the legs and it should accommodate and cover the lead screw mechanism.the understructure should consist of 4 legs made up ofms erw tube of diameter 25.4 mm and 1.6mm thick. the press formed pipe leg should give a round & clean look. all the legs should be provided with 4 nos of nylon 6 bush.all metal componentsshould be pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbialepoxy polyster powder coating . all welding should be co2 argon welding to minimise rusting on the welding areas.safe working load must be 135kg , strecher on trolley type i 2005mm ( l ) x666mm ( w ) x827mm ( h ) .the trolley should be made of 31.75 and 25.4 mm dia 1.6 mm thick erw tube.holder for stretcher should be made up of mild steel.castor should be of 200 mm dia , diagonal locking castor.stretcher should be made up oferw tubeof dia 25.4 mm and thickness 1.6 mm.top sheet should be made of crca sheetof thickness 1.2 mm with contour shape to accommodate patient.iv pole holder should be made ofms .maximum safe work load should be 135 kg.to ensure qood quality welding co2 argonprocess should be adhered to.all metal componentsshould be pre treated with zinc phosphating in 9 tank porcess and then powder coated with anti microbialepoxy polyster powder coating.goods should be supplied in knocked down construction to reduce carbon emission. performance test :proof loading test , cycle tests , impact test, salt spray test, castor break test, the manufacturer should compilant with iso 9001, 14001, 13485, ohsas 1800 and ce certification. , doctor desk type x s / f / f executive table main desk should be of dimesion : 1350w x 750d x 750h.the table top should bein white cedar, side panelsin black, while the modestypanel ina combination of black & white cedar. side panels : ( black ) made form 18mm thick plt with pvc lipping.modesty panel : made form 18mm thick plt with pvc lipping. bigger upper panel in black and smaller lower panel in white cedar. made from 18mm thick plt with pvc lipping. mobile pedestal : one box and one filing drawer with 18mm thick plb fronts and top. handles : black powder coated die cast aluminum alloy handles. mobile pedestal and hdu are fitted with central lock. , chair type iii s / f / f executive chair1 ) seat / back assembly: the seat and back are made up of 1.2 cm. thick hot pressed plywood, upholstered withfabric upholstery covers and moulded polyurethane foam. the back foam is designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area.high back size : 47.5 cm ( w ) x 69.5 cm ( h ) seat size : 47.0 cm. ( w ) x 48.0 cm. ( d ) 2 ) polyurethane foam: the polyurethane foam is moulded with density = 45 + / 2 kg / m 3and hardness = 20 + / 2at 25% compression. 3 ) armrests: the one piece armrests are injection moulded from black co polymer polypropylene. 4 ) center tilt synchro mechanism : the mechanism is designed with the following features:• 360 revolving type. • upright position locking. • tilt tension adjustment.• seat / back tilting ratio of 1:3 ( 60 seat tilt / 180 back tilt ) . 5 ) pneumatic height adjustment : the pneumatic height adjustment has anadjustment stroke of 12.0 cm. 6 ) telescopic bellow assembly : the bellow is 3 piece telescopic type and injection moulded in black polypropylene. 7 ) pedestal assembly , staff / visitor chair type i chair of over all size: 58.0cm ( w ) x 56.5cm ( d ) x 87.5cm ( h ) & 48.0cm ( sh ) seat / back assembly: the seat and back are made from chemically treated and seasoned wood, upholstered with plywood, black leather cloth, and u foam.*back size: 46.0cm ( w ) x 27.0cm ( h ) .*seat size: 46.0cm ( w ) x 40.0cm ( d ) .armrest tube: the armrest tube is made of m.s. e.r.w. tube dia. 2.54cm. ( 1” ) x 16bg thick and powder coated.armrest: the armrest is gas assisted injection moulded from black polypropylene.understructure assembly: the understructure assembly is a cantilever type frame made of dia. 2.54cm. ( 1” ) x 14bg. thick m.s. e.r.w. tube and powder coated. , wheel chair type i ( l ) 790 x ( w ) 600 x ( h ) 870mm.foldable frame structure should be made of section 22diax1.2mm a3 carbon steel with chrome finish. cross bar should be made of a3 carbon steel with section 25.4 x 1.2mm.rear wheel:24 inch solid mag wheels with alloy in the rim .integrated handrim provide to drive the wheel chair of section 16x1.2mm a3 carbon steel with chrome finish.front wheel :8 inch hub made of pa polymer and outer with solid rubber.pu molded arm rest & base should be made of abs for better arm support .leatherite strap for calf rest & leatherite cushion for seat.adjustable alluminimum die cast foot rest with updown & swivel type mechanism.handles should be made of moulded rubber grip to push the wheelchair.hand brakes should be provided to lock the wheelchair at desired location.foot pressextended base with molded plastic for better grip.anti rust chrome finsh. safe work load of100 kg , basin stand type i ht 850 mm ss bowl ms tubular frame of dia 25.4 x1.2 mm tube work mounted on three 50 dia.non rusting castors all without brack. ss part finished with matt polish , kick buckettype i overa all dimension of the bucket should be 517 mm ( l ) x 517 mm ( w ) x 210 mm h.it should made of 12.7 mm dia and 1.6 mm thick ss 304 ring. the bowl should be ss made of .8 mm thck .3 nos 50 mm diahigh endurance plasticinjection moulded castors should be provided for the movement.mx load bearing capacity should be 10 kg. , hospital curtain tracks & i.v. tree system supply installation testing & commissioning of cubical tracks system made of powder coated aluminium alloy, stain free polyster fabric , water repellent curtains , smooth movement , non sticking runnner with stainless steel hooks made from mirror finish stainless steel , adjustable height with all accessories. total quantity : 1...
30458761 bids are invited for pile boring, providing and installation bored cast in situ reinforced cement concrete piles of grade m 25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using direct mud circulation ( dmc ) or bailer and chisel technique by tripod and mechanical winch machine all complete, including removal of excavated earth with all its lifts and leads ( length of pile for payment shall be measured up to bottom of pile cap ) .450mm dia piles ( inclusive of carriage ) , pcc providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering all work up to plinthlevel : 1:3:6 ( 1 cement : 3 coarse sand ( zone iii ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources ) ( inclusive of carriage ) , rcc providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland / portland slag cement, admixtures in recommended proportion as per is: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer in charge; for the following grades of concrete. note: extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re design the mix or bear the cost of extra cement. ( inclusive of carriage ) , brick work brick work with bricks of class designation 100a in foundations and plinthin :cement mortar 1:4 ( 1 cement : 4 coarse sand ) ( inclusive of carriage ) , sand filing supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. ( inclusive of carriage ) with lead upto 3 km , shuttering centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete , steel steel reinforcement for r.c.c. work ready to use cut and bend rebars of approved make from factory / workshop to construction site including placing in position and binding all complete thermo mechanically treated bars of grade fe 500d or more. , plinth protection making plinth protection 50mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand ( zone iii ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources ) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. , door & window providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, paneling and dash fasteners to be paid for separately ) :powder coated aluminium ( minimum thickness of powder coating 50 micron ) , glass providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) :with float glass panes of 5 mm thickness ( weight not less than 12.50 kg / sqm ) , upvc door providing and fixing of factory made upvc white colour casement door, upvc multichambered extruted frame, sash and mullion profile. frame duly reinforced with 1.2mm gi section box tpe chamber and sash with 1.5mm thick gi section ( ± 0.2mm ) based on wind load calculations ( shape and size according to upvc profiles ) , appropiate dimentions of upvc extruded glazing bead, epdm gasket ( k / o type ) , seperate drainage system, ss34 grade friction hinges 2d / 3d plate hinges, zinc alloy ( white powder coated ) casement handle, gi fastener 8x100 mm size for fixing frame to finish wall, plastic packer and caps and necessary steel screws etc.profile of frame and sash shall be metered cut and fusion welded at all corners, mullion shall be also fusion welded / joined mechanically including drilling of holes for fixing hardware and drainage of water etc. after fixing of frames , gap between frame and adjascent wall shall be filled with pu foaam / backer rod required size and the approved quantity. after that sealed with weather proof silicon sealant at both side, all complete as per approved drawing and direction of eic , door closer providing and fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ) , with necessary accessories and screws etc. complete. , door providing and fixing isi marked flush door shutters conforming to is : 2202 ( part i ) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including stainless steel butt hinges wirhnecessary screws , door stopper providing and fixing aluminium hanging floor door stopper, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour and shade, with necessary screws etc. complete. single rubber stopper , solling providing designation 100 a one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as perbuilding specification and direction of e / l, , tile 1 providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm , tile 2 providing and laying ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including pointing the joints with white cement and matching pigment etc., complete. , tile 3 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. , granite providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge :flamed finish granite stone slab jet black, cherry red, elitebrown, cat eye or equivalent. , false ceiling providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance ( rh ) of 99%, light reflectance ? 85%, thermal conductivity k = 0.052 0.057 w / m k, fire performance as per ( bs 476 pt 6 &7 ) in true horizontal level suspended on interlocking t grid of hot dipped all round galvanized iron section of 0.33 mm thick ( galvanized @120 gsm ) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item ( galvanised@80gsm ) 50 mm long 8mmouter diameter m 6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘t’ , pre fabsteel designing, providing, installing and fixing factory finished custom designed cold form light gauge steel framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. the steel sheet shall be galvanized ( az 150gms aluminium zinc alloy coated steel having minimum yield strength 300 550 mpa ) conforming to aisi specifications and ibc 2009 for cold formed steel framing and construction and also as per is: 875 1987, iso 800 1984 and is:801 1975. the wind load shall be as per provisions of is 875 ( part iii ) . lgsfs frame shall be designed as per is: 801 using commercially available software such as frame cad pro 11.7 / staad pro v8i / architekv2.5.16 / revit architecture 2011 or equivalent. proper usage of connection accessories like heavy duty tension ties, light duty hold ons, twist straps ( to connect truss with wall frames ) , strong tie, tie rod, h brackets, boxing sections, l shaped angles for better structural stability. the framing section shall be cold form c type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple / slot at required locations as per approved drawings. , pre fabwall providing and fixing of external wall system on light gauge steel frame work with outer face cement boards as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make. a groove of 2 mm to 3mm shall be maintained and grooves shall be sealed with silicon based sealant. the board shall be fixed in a staggered pattern. screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm and. internal face 12.5 mm thick gypsum plaster board fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. ( cost of frame work to be paid for separately ) outer face: outer face having 6mm thick fiber cement board fixed on 9mm thick fiber cement board, type a, as per is:14862:2000 ( high pressure steam cured ) inner face : 12.5 mm thick gypsum plaster board conforming to is 2095:2011 fixed on 8 mm thick fibre cement board confirming to is:14862:2000 of type b ( high pressure steam cured ) , pre fabin. wall providing and fixing internal wall panels on light gauge steel frame work with 12.5mm thick gypsum plaster board conforming is 2095:2011 fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make, screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. ( cost of frame work to be paid for separately , roof sheet supply & installation of precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by engineer in charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55mm ) with epdm seal or with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. , ridge plain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : ridges plain ( 500 600mm ) . , gutter drain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : gutter , flashing providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 5% total coated thickness ( tct ) , zinc coating 120gsm as per is: 277 in 240mpasteel grade, 5 7 microns epoxy primer on both side of the sheet and polyester topcoat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumenwashers complete :flashings / aprons. ( upto 600 mm ) , under deck insulation providing and fixing thermal insulation of ceiling ( under deck insulation ) with resin bonded rockwool conforming to is: 8183, density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to ceiling with metallic cleats ( 50x50x3 mm ) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. , resin bonded rock wool providing and fixing thermal insulation with resin bonded rock wool conforming to is: 8183, having density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to wall with screw, rawel plug & washers and held and in position by criss cossing gi wire etc. complete as per directions of engineerin charge. , face panel providing and fixing in all exterior face panels breathable vapour barrier underneath the cementfiber board as per national building code 2009 complete as per direction of engineer in charge. , lap siding supplying and installation of moisture resistant / fire resistantlap siding 8 mm thick and width as per standard sizes made ofiber cement board with embossed decorative finish to give pleasing exterior fixed horizontally with staggered joints including minimum over lapof 32 mm external cement fibre boardconforming to is 14862:2000 offixed with self drilling / taping screws / fastners of approved make. , putty providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distemper distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1 new work ( two or more coats ) over and including water tinnable priming coat with cement primer , ex. paint finishing walls with textured exterior paint of required shade : new work ( two or more coats applied @ 3.28 ltr / 10 sqm ) over and including priming coat of exterior primer applied @ 2.20kg / 10 sqm sqm , oil paint painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work . , steel 1 steel work in built up tubular ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. hot finished welded type tubes , excavation earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan ) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. , road providing and laying c.c. pavement of mix m 25 with ready mixed concrete from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc.complete as per specifications and directions of engineer in charge. ( the panel shuttering work shall be paid for separately ) . ( note: cement content considered in this item is @ 330 kg / cum. excess / less cement used as per design mix is payable / recoverableseparately ) . , paver block providing and laying 60 mm thick factory made cement concrete interlocking paver block of m 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thickcompacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer in charge. , phe 1 providing & fixing stone slab table rubbed, edges rounded and polished of size 75 x 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste 6mm nominal size ) as per engineer in charge and finished smooth white agaria marble stone , phe 2 providing and fixing salem stainless steel a isi 304 ( 18 / 8 ) kitchen sink as per is: 13983 with ci brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. kitchen sink with drain board510x1040mm bowl depth 200mm. , phe 4 providing and fixing mirror of superior glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing:rectangular shape 453x357 mm , phe 5 providing and fixing toilet paper holder:c.p. brass , phe 6 providing and fixing water closet squatting pan ( indian type w.c.pan ) with 100 mm sand cast iron p or s trap, 10 litre low fixturescomplete, including cutting and making good the walls andlevel whitep.v.c. flushing cistern, including flush pipe, with manually controlleddevice ( handle lever ) conforming to is : 7231, with all fittings andfloors wherever required :white vitreous china orissa pattern w.c. pan of size580x440 mm with integral type foot rests , phe 7 providing and fixing white vitreous china pedestal type water closet ( european type w.c. pan ) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device ( handle lever ) , conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : w.c. pan with isi marked white solid plastic seat and lid , phe 8 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer in charge , phe 9 providing and fixing cp brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge.. ( sink & urinal ) , phe 10 providing & fixingptmt towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealedfittings arrangement of approved quality and colour weighing not less than 88 gms , phe 11 providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms.15mm nominal bore , phe 12 providing and fixing c.p. brass bib cock of approved quality confirming to is:893115mm nominal bore , phe 13 providing and fixing c.p.brass angle valve for basin mixer and geyser points of approved quality conforming to is 8931 a ) 15 mm nominal bore.15 mm nominal bore , phe 14 providing and fixing wash bashin with c.i. brackets, 15mm dia cp brass singal hole basin mixer of approved quility and make, including painting of fittings and brackets, cutting and making good the walls wherever required white vitreous china surgeon type wash basin of size 660x460 mm with a pair of 15 mm c.p. brass pillar taps with elbow operated levers , phe 15 providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption ) , having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of engineer in charge.. , phe 16 providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. , phe 17 providing and fixing white vitreous china laboratory sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p brass waste and 40mm c.p. brass trap with necessary c.p. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :size 600x450x200 mm , phe 18 providing and fixing cp brass single lever telephonic wall mixer of quality & make as approved by engineer in charge . a ) 15 mm nominal dia. , phe 19 providing and fixing cp brass shower rose with 15 or 20 mm inlet100 mm diameter , phe 20 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. , phe 21 providing and fixing ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. , phe 22 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. ( internal work ) 40 mm dia, nominal bore , phe 23 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. ( internal work ) 50 mm dia, nominal bore , phe 24 two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand andmanufacturetwo more coast on new work , phe 25 p / f m.s. cap 100 mm dia , phe 26 providing and fixing, upvcpipes 6 kg / cm2 ( is: 4985 ) including all fittings ( plain or door ) e.g. bends, junction, offsets, access pieces, jointing with rubber ring / solvent cement joints includingrequired suports, cutting chase or holes in walls and floors and making good where required.75 mm dia pipe , phe 27 providing and fixing, upvcpipes 6 kg / cm2 ( is: 4985 ) including all fittings ( plain or door ) e.g. bends, junction, offsets, access pieces, jointing with rubber ring / solvent cement joints includingrequired suports, cutting chase or holes in walls and floors and making good where required.110 mm dia pipe , phe 28 providing & fixing on wall face unplasticised rigid pvc rain water pipes conforming to is:13592 tyape a included jointing with seal ring conforning to is:5382 leaving 10 mm gap for thermal expansion. ( i ) single socketed pipes.110 mm diameter , phe 29 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. coupler 110 mm diameter , phe 30 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. bend 87.5 deg 110 mm diameter , phe 31 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. shoe 110mm shoe , phe 32 providing & fixing unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50mm hard wood plugs, screwed with .m.s. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1cement : 4 coarse sand ) and making good the wall etc. complete.110 mm dia , phe 33 providing and fixing cpvc pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 20 mm nominal outer dia pipes , phe 34 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 25mm dia, nominal bore , phe 35 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 32 mm dia, nominal bore , phe 36 providing and fixing gun metal non return valve of approved quality ( pn 1.6 ) 40 nominal bore , phe 37 providing and fixing brass stop cock of approved quality15mm nominal bore , ex. phe 6 providing 250mm wide brick drain in cement mortar ( 1:6 ) with av. 150mm.clear depth and 250mm apron including cost of e / w. involved with 75mmcement concrete ( 1:4:8 ) over one brick designation 100 a flat soling inproper grade and slope at the base.the drain duly.plastered in cm. ( 1:3 ) with punning over exposed surface all complete as per buildingspecification and direction of e / l, , ex. phe 7 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil ( hard or soft ) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [ hard / dense soil ] pipes, cables etc.exceeding 80mm dia.but not exceeding 300mm dia. , ex. phe 8 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil ( hard or soft ) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [ hard / dense soil ] pipes, cables etc.exceeding 80mm dia. exceeding 300mm dia. , ex. phe 9 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 250 mm dia rcc pipe , ex. phe 10 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 300 mm dia rcc pipe , ex. phe 11 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 450 mm dia rcc pipe , ex. phe 12 inside size 120x90 cm and 90 cm deep including c.i. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg ) :with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , ex. phe 13 providing and fixing square mouth sw gully trap grade ‘a’ complete ci grating brick masonry chamber with bricks of class designation 75 and water tight ci cover with frame of 300 x 300 mm size ( inside ) the weight of cover to be not less than 13.00 kg and frame to be not less than 5 kg. as per standard design. ( cover min. 4.5 kg & frame min.2.7 kg ) 180x150 mm size p type with fps bricks , ex. phe 14 constructing masonry chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement:4 coarce sand ) for stop cock complete with c.i. surface box 100x100x75mm ( inside ) with locking arrangement and rcc top slab 1:2:4 mix ( 1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size ) necessary excavation foundation concret 1:5:10 ( 1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortor 1:3 ( 1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design. , ex. phe 15 constructing masonry chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement: 4 coarse sand ) for sluice valve, with c.i. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with channel lid and rcc top slab 1:2:4 mix ( 1 cement: 2 coarse sand: 4 graded stone sggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement: 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design:with f.p.s. bricks , ex. phe 16 structual steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , ex. phe 17 making connection of gi distribution branch with gi main of 50 80mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete. , rain water harvesting 1 boring / drilling bore well of required dia for casing / strainer pipe, bysuitable method prescribed in is:2800 ( part i ) , including collecting sample from different strata , preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , rain water harvesting 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , rain water harvesting 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150 mm nominal size dia , rain water harvesting 4 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 5 supplying, filling, spreading & levelling gravel of size range 5mm to 10mm, in recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 7 providing and fixing bail plug / bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 ( part i ) . 100 mm dia , rain water harvesting 8 making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , rain water harvesting 9 constructing soak pit 1.20x1.20x1.20 m filled with brickbats including s.w. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , tubewell 1 boring / drilling bore well of required dia for casing / strainer pipe, bysuitable method prescribed in is:2800 ( part i ) , including collecting sample from different strata , preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , tubewell 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , tubewell 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100mm nominal size dia , tubewell 4 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100 mm nominal size dia , tubewell 5 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , tubewell 6 providing and fixing bail plug / bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 ( part i ) . 100 mm dia , submersible pump 35m deep boring with casing and pipe. supply of pipe etc supplying & installation of suitable 2hp submersible pump b.s or k.s.bor equivalent make with finolex cable 1x3x2.5 squmm ( upto 50mtr ) withflexible conduit 25mm dia, electrical out door pannel with required electrical fitting such as mcb of 0 25amp ( havell or indocopp or mds make ) , volt & ampere meter ( ae make ) , single phase preventer ( minilac or vsp 1 make ) starter ( l&t or bch make ) etc of approved make, 40mm hdpe pipe ( 25 mtr ) and all accessories complete as per requirement of site. , water purifier and cooler 1 fitting and fixing single faucet storage type water cooler ( size 461 mm wide x 582 mm deep x 1217 mm height, weight 46 kg ) fully stainless body having storage capacity of 40 ltrs, cooling capacity of 40 ltrs. / hr. with hermetic type compressor, gas cooled motor equipped with over load protector, condensor for propeller type, thermostat autometically controlled temperature, refrigerent r 22, 230 volt, single phase 50 hertz, maximum current 2.3 amp including plug top and electrical lead wire connection upto 3 metres from the cooler, water inlet and drain out connections complete in all respects of voltas model no 40 / 40 tushar pss type or similar type of approved make. , water purifier and cooler 2 fitting and fixing water purifier for drinking purpose of capacity 6 litres / min, 5 purification system with reverse osmosis system with ultra ventilated membrane, tds500 to 2000 mgl / ppm, auto shut off with microswitch float manual flush facility, tds reduction 90% having automatic backwash system with filteration unit along with all accessories including plug top and electrical lead wire connection upto 3 metres from the purifier, water inlet and drain out connections complete in all respects similar to aquaguard or similar approved make ( model aquasure elegant ro water purifier of size width 360 mm x height 430 mm x depth 235 mm and weight 8.5 kg ) . , fire extinguisher 1 providing and fixing carbon di oxide type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. capacity 4.5 kg. , fire extinguisher 2 providing and fixing abc powder type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.capacity 6.0 kg. , electrical 1 wiring for light point / fan point / exhaust fan point / call bellpoint with 1.5 sq.mm frls pvc insulated copper conductorsingle core cable in surface / recessed steel conduit, withmodular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group c , electrical 2 wiring for twin control light point with 1.5 sq.mm frls pvcinsulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required. , electrical 3 wiring for group controlled ( looped ) light point / fan point / exhaust fan point / call bell point ( without independent switch etc. ) with 1.5 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, and earthing the point with 1.5 sq. mm frls pvc insulatedcopper conductor single core cable etc. as required. group c , pvc conduit 1 supplying and fixing of following sizes of medium class 20mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 2 supplying and fixing of following sizes of medium class 32mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 3 supplying and fixing of following sizes of medium class 50mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , electrical 4 wiring for light / power plug with 2x4 sq. mm frls pvcinsulated copper conductor single core cable in surface / recessed conduit alongwith 1 no. 4 sq. mm frls pvcinsulated copper conductor single core cable for loop earthingas required. , wiring frls pvc insulated copper conductor 1 2 x 2.5 sq. mm. + 1 x 2.5 sq. mm. earth wire , wiring frls pvc insulated copper conductor 2 2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire , wiring frls pvc insulated copper conductor 3 4 x 6 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 4 4 x 10 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 5 4 x 16 sq. mm + 2 x 16 sq. mm earth wire , s / f, gi box along with modular base & cover plate 1 or 2 module ( 75mm x 75mm ) , s / f, gi box along with modular base & cover plate 1 3 module ( 100mm x 75mm ) , s / f, gi box along with modular base & cover plate 2 4 module ( 125mmx75mm ) , s / f, gi box along with modular base & cover plate 3 6 module ( 200mm x 75mm ) , s / f, gi box along with modular base & cover plate 4 12 module ( 200mmx150mm ) , s / f modular switch / socket on the existing modular plate 5 / 6 amps switch , s / f modular switch / socket on the existing modular plate 2 15 / 16 amp switch , s / f modular switch / socket on the existing modular plate 3 3 pin 5 / 6 amp socket outlet , s / f modular switch / socket on the existing modular plate 4 6 pin 15 / 16 amp socket outlet , s / f modular switch / socket on the existing modular plate 5 telephone socket outlet , s / f modular switch / socket on the existing modular plate 6 tv antenna socket outlet , s / f modular switch / socket on the existing modular plate 7 bell push , electrical 5 supplying & fixing suitable size gi box wih modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, “c” curve including connections, painting etc. as required. ( for ac / geyser ) , electrical 6 supplying and drawing co axial tv cable rg 6 grade, 0.7 mm solid copper conductor pe insulated, shielded with fine tinned copper braid and protected with pvc sheath in the existing surface / recessed steel / pvc conduit as required. , electrical 7 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. , electrical 8 providing and fixing m.s. fan clamp type i or ii of 16 mm dia m.s. bar, bent to shape with hooked ends in r.c.c. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as required. , electrical 10 supplying and fixing 20 a, 240 v, spn industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 a c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. , electrical 11 supplying and fixing 20 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 12 supplying and fixing 30 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 13 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 8 way , double door , electrical 14 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 12 way , double door , electrical 15 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 16 way, double door , electrical 16 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 6 way ( 4 + 18 ) , double door , electrical 17 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 8 way ( 4 + 24 ) , double door , electrical 18 supplying and fixing of following ways surface / recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs ( but without mcbs and incomer ) as required . ( note : vertical type mcb tpdb is normally usedwhere 3 phase outlets are required. ) 4 way ( 4 + 12 ) , double door , 40 a, rccb supplying and fixing following rating, double pole, ( single phase and neutral ) , 240 v, residual current circuit breaker ( rccb ) , having a sensitivity current 30 ma in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a mcb supplying and fixing 40 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 40 tp mcb , single pole mcb supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 63a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 100a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , l / f pvc sheathed / xlpe power cable in trench laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 95 sq. mm and upto 185 sq. mm , l / f pvc sheathed / xlpe power cable in trench 1 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm , l / f pvc sheathed / xlpe power cable over cable tray upto 35 sq. mm ( clamped with 1mm thick saddle ) , l / f pvc sheathed / xlpe power cable over cable tray 2 above 35 sq. mm and upto 95 sq. mm ( clamped with 25x3mm ms flat clamp ) , l / f pvc sheathed / xlpe power cable over cable tray 3 above 95 sq. mm and upto 185 sq. mm ( clamped with 25 / 40x3mm ms flat clamp ) , l / f pvc sheathed / xlpe power cable over cable tray 4 above 185 sq. mm and upto 400 sq. mm ( clamped with 40x3mm ms flat clamp ) , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3.5c x 300 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 1 3.5c x 240 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 2 3.5c x 120 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3 3.5c x 95 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 4 3.5c x 50 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 5 4c x 35 sqmm aluminium conductor cable a2xfy , cable tray supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 100 mm width x 50 mm depth x 1.6 mm thickness , cable tray 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 300 mm width x 50 mm depth x 1.6 mm thickness , cable tray 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 600 mm width x 62.5 mm depth x 2.0 mm thickness , cable tray “bends” supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.100 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.150 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.300 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 3 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.450 mm width x 50 mm depth x 2 mm thickness , cable tray “bends” 4 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.600 mm width x 62.5 mm depth x 2.0 mm thickness , mv cable supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 300 sqmm, aluminium conductor cable a2xfy , mv cable 1 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 240 sqmm, aluminium conductor cable a2xfy , mv cable 2 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 120 sqmm, aluminium conductor cable a2xfy , mv cable 3 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 95 sqmm, aluminium conductor cable a2xfy , earthing earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required. , earthing 1 earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. , earthing 2 earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. , earthing 3 providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required. , earthing 4 providing and fixing 25 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required. , earthing 5 providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required. , earthing 6 providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for connections etc. as required. , fiting & fixtures 1 supply and installation of regular / standard model a.c. ceiling fan of 1400 mm sweep including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq. mm fr pvc insulated copper conductor etc as required. , fiting & fixtures 2 supplying and fixing single wall mounted 18 / 22 watt led type batten fitting complete with electronic driver and led tube etc directly on wall / ceiling includingconnections with 1.5 sq.mm fr pvc insulated copper conductor and earthing the body etc. as required. , fiting & fixtures 3 supply installation and comissioning ofintegrated batten made ( 2ft ) of ultra slim co extruded polycarbonate channel with housing part in white finish & diffuser part in reeded opal finish.white finish abs end caps with decorative circular coloured polycarbonate cap snap fitted on the end cap to enhance the aesthetic of the fixture. these end caps are snap fitted to the fixture.high efficiency long life led with lumen efficacy of 130 lm / w with viewing angle of 120º.powered by an integral isolated low thd electronic led driver ( smps based constant current supply ) with output short circuit protection, surge protection.can be fixed directly into the wall / ceiling by means of mounting ss clips provided with the fixture. ip 20, lumen output of 950 lumens with system efficacy of > 105lm / w .cri >80, color temperature 6500k, thd <20% and pf>0.95, ip20 . life class of 35, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz;internal surge protection:3 kv; protection including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. : reverse polarity, open & short circuit. driver safety requirement standards :is 15885 2 13, test report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source. cat ref havells :lumilinebs9wled840spcwh or approved equivalent. , fiting & fixtures 4 supplying and fixing recess mounted 12 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 5 supplying and fixing recess mounted 18 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 6 supply, installation, testing and commissioning of 400 mm sweep, 65w, blade material aluminium blades , speed & oscillation 3 speed, pull cord for speed and oscillation.air delivery minimum 72 m³ / min, speed minimun 1350 revolution per minute.suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. , fiting & fixtures 7 supply installation and comissioning of 28w 2x2 panel recess mounting luminaire with high performance leds, suitable for mounting with armstrong / grid ceiling.crca powder coated white after phosphochromate treatment.high efficiency long life led package in integral module with lumen efficacy of >100 lm / w and viewing angle of 120° to ensure better uniformity.powered by an independent isolated, selv output electronic led driver ( smps based constant current supply ) with output short circuit protection, surge protection & other reliability test. lumen output of 3450 lumens.cri >80, color temperature 5700k, thd <10% and pf >0.95, ip20, ik03.life class of 50, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz;internal surge protection:3 kv; protection including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. : reverse polarity, open & short circuit. driver safety requirement standards :is 15885 2 13, test report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source.cat ref havells :venusneohe2x2plr128wled857 or approved equivalent. , fiting & fixtures 8 supplying installation testing & commissioning ofb22 based 9w led 3 star bulb with 850 lumen, 6k color temperature including holder. , fiting & fixtures 9 supplying installation testing & commissioning of black painted extruded aluminium housing. green / red led’s mounted inside the housing. laser engraved signage matter on single / double acrylic sheet fixed on one side suitable for wall / ceiling / suspension type single / double sided display. in double sided version black paper is inserted. ni cd battery back up to 2 hrs. ( charged up to 8 10 hrs ) .mounting strings provided for pendent mounting operating voltage 150 280v ac ambient operating temperature. – 0 to 450c ingress protection – ip42.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. 220208 besl 03 led ssd wbb green 240 3 8wor220209 besl 03 led ssd wbb red 240 3 8wor220210 besl 03 led dsd wbb green 240 3 8wor220211 besl 03 led dsd wbb red 240 3 8w , fiting & fixtures 10 supply, installation, testing & erecting of ip66 bulkhead surface type lighting fixture 10w made up of pressure die cast aluminium housing and polyster powder coated die cast aluminium with high quality polycarbonate diffuser in opal finish for glare free light distribution.high efficiency long life led module with smd led package mounted on mcpcb with lumen efficacy of >95 lm / w with system lumen 950. powered by integral electronic led driver with apfc with low thd output short / open circuit protection. cct 5700, cri>80, system efficacy>90lm / w, thd<15%, pf>.95, ip66, ik 10, life class of 50, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. cat ref: havells : hexaft10wled857ssymbopc or approved equivalent. , civil & misc works1 providing and fixing m.v. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works2 providing and fixing h.t. danger notice plate of 250 mm x 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works3 supplying and making cable route marker with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm x 60 cm at the bottom and 50 cm x 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. , civil & misc works4 supplying and fixing cable route marker with 10 cm x 10 cm x 5 mm thick g.i. plate with inscription there on, bolted / welded to 35 mm x 35 mm x 6 mm angle iron, 60 cm long and fixing the same in ground as required. , civil & misc works5 providing & fixing in position 1000 mm wide , electrical insulating rubber mats as per is 15652:2006, 2 mm thick, suitable up to 1.1 kv , fire retardant, no effect of acids, alkalis and transformer oils, moisture proof, high tensile strengthandtexture finish / cloth impression ( anti slip , marking on top ) , civil & misc works6 supply & fixing shock treatment chart duly mounted on a wooden frame with 5 mm thick glass as required ( approx front area 1.20 sq metre ) , 40 kvaups supplying, installation, testing and commissioningof online double conversion fully microprocessor based , indoor type, compact ups system of following rating with igbt based pwm technology to achieve thd < 3% and input power factor of greater than 0.95 at 50% loading, suitable for three phase ac input voltage 380 v to 440 v, 50 hz +3% / 3 % and three phase ac output voltage 415 ± 1% volts & frequency 50 ± 0.5 hz , inbuilt isolation transformer, necessary vrla batteries of suitable size having 30 minutes back up time , mounting rack including and suitable size connecting cable ( for ups to battery and battery to battery ) , static and maintenance bypass switch, snmp card for rs232 / ethernet ip computability for operation and monitoring etc. with all components as mentioned , specifications, complete as required.note : concerning vendor needs to furnish the battery sizing calculations at the time of ga approval and battery size has to be as per the approved ga drawing. , external lighting 1 supply and erection of 4 metre height hot dipgalvanized octagonal street light pole with followingarm with top dia 70 mm and bottom dia a / f 130 mm, made of 3 mm thick sheet along with base plate of size220 x 220 x 12 mm , small door opening for junctionbox mounting with mcb & connector, cement concreteof 1:3:6 including excavation, refilling and suitable sizefoundation bolts with template and all complete jobasrequired. ( but without pole collar ) single arm , external lighting 2 supplying and fixing 40 / 45 watt led type street lightwith die cast aluminium housing for ingress protectionof ip65 and complete with all accessories etc, onpole / building including connection with fr pvcinsulated copper conductor cable and earthing thebody etc. as required. , ip based cctv system 1 sitc of 2 megapixel @ 25fps, h.265 ip bullet camera, 1 / 2.9 cmos with 2.8~12mm varifocal lens, 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 2 sitc of 2 megapixel @ 25fps, h.265 ip dome camera, 1 / 2.9 cmos with 3.6 fixed mm 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 3 sitc of 2 megapixel @ 25fps, ptz camera h.265 ip dome camera, 1 / 2.9 cmos with 2.6 fixed lenslux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 4 sitc of 32ch 4k ivr , h.265 / h.264 • 1080p real time • 4k display • dual lan • 8x hdd • raid •web plugin free h.265 / h.264 compression technology 4k display for clear monitoring up to 1080p 16ch decoding ability smart search ii smart vca event searchsupport raid 0, 1, 5 supported to prevent from recording data loss browsers supported: ie , smart functions : target count, electric fence, face detection, humaniod detection, retrograde detection, leave position detectio output, local & network backup etc. complete as required. , cctv 5 sitc of harddiskdrive8tb, 24 / 7surveillance category only complete etc as required.etc.all complete , cctv 6 sitc of 55 led narrow bazel for monitoring for nvr server etc. all complete. , cctv 7 sitc of rj 45 outlets near the cameras etc. all complete. etc. all complete. , cctv 8 sitc of cat 6 patch cords 1 meter high quality four pair twisted stranded cable terminated with rj45 modular plugs at both the ends. , signage 1 providing & fixing of building direction signage mounted on pole, with pole of 100x100mm shs ( square hollow section ) of height of 5600mm, and sign size of 900x1050, sign made of aluminiu c section of 60mm with internal framing to support the frame in ms tubes hollow section, frame work duly painted with anti rust coatings, with facia of 3mm thick exterior grade aluminium composite panel, cladded with uv cured digital printed retroreflective sheet of 3m make, and back panel of 3mm exterior grade acp, all pipes to be painted in approved color. cost shall includecost towards installation, including excuvation and filling up with specified pcc and fixing of foundation bolts as specified, also it shall include the designing charges.all complete as per direction by engineer in charge. , signage 4 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge , wall projected 250x210mm, both sides , signage 5 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge, door mounted, 300x80mm , 2 tr air conditioning 1 split ac ( inverter model ) : supply, installation, testing, commissioning of split type wall mounted air conditioning units of following capacity including inddor, outdoor unit fitted with inverter based rotary compressor fitted with rotary compressor, copper condensor and first charge refrigent r410a / eco friendly green gas only, all complete including all electrical connections to the electrical power supply system of the building, includingbut not limited to supply of all electrical plugs, etc., as necessary, lengthening of all electrical wires of ac units ( both indoor and outdoor ) , drain pipe andincluding suitable voltage stabilisers, etc. so as to place them in a concealed manner in the desired position. the copper pipes and electrical cables shall be concealed in approved manner and neatly run in straight lines in a workman like manner with proper supports. complete supply and installation of split2 tr star rating 3 star , refrigerant piping copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 25 mm od, wall thickness >= 1.2 mm ( insulation 19 mm thick ) , refrigerant piping 1 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 19.1 mm od, wall thickness >= 1.0 mm ( insulation 13 mm thick ) , refrigerant piping 2 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 15.9 mm od, wall thickness >= 0.8 mm ( insulation 13 mm thick ) , refrigerant piping 3 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 9.5 mm od, wall thickness >= 0.8 mm ( insulation 13 mm thick ) , drain piping providing and fixing of cpvc 6 kg / cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 20 mm , drain piping 1 providing and fixing of cpvc 6 kg / cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 32 mm , main oxygen manifold supply, installation, testing and commissioning of following gas manifold system ( excluding cylinders ) . the manifold is configured for designed numbers of cylinders and is suitable to withstand a pressure of 145 kg / cm2, along withhigh pressure copper annealed tail pipes with end brass adapter suitable for cylinders and manifold. top frame comprising of high pressure copper pipes of size 1 / 2” nb x 15swg with high pressure brass fittings made of high tensile brass and connections through nonreturn valves, the design of middle and bottomframes is provided to fit both round and flat bottom cylinders safely. the manifold is tested ( hydraulically ) at 3500 psig. ( it should be ce and iso 13485 certified ) mani fold oxygen manifold 6 + 6 cylinder banks complete with nrv, middle frame, bottom frame with ce marked, , emergency manifold emergency oxygen manifold 01 + 01 cylinder emergency manifold with complete regulator, nrv, middle frame & bottom frame, , control panelfor oxygen fully automatic three port control panel for oxygen supply, installation, testing and commissioning of automatic manifold control panel would provide a duty or standby gas supply from two cylinder banks with automaticchangeover the manifold indicates local status and has a remote indicator facility. automaticmanifold control panel would be designed to supply the mgps with a constant pressure supply via a control panel form two equal banks of cylinders and the changeover from the ‘duty’ to the ‘standby’ bank of cylinders would beautomatic. automatic changeover from the duty to the standby bank would occur at a cylinder pressure that will ensure the maximum usage of the contents of the duty bank. the changeover unit would be provided with monitoring todetect and display: duty bank operating, duty bank empty, standby bank operating, and standby bank below 10 % when the duty bank is empty, reserve bank low, pipeline pressure fault. there would be facility to connect liquidoxygen supply ( i.e. three port control panel ) ( it should be ce and iso 13485 certified ) fully automatic three port control panel for oxygen , emergency manifold line regulator emergency manifold line regulator supply, installation, testing and commissioning of emergency manifold line regulator i n p u t p r e s s u r e 1 5 0 k g / c m 2 working pressure 4 kg / cm2 it should be ce and iso 13485 certified.oxygen input pressure 150 kg / cm2 working pressure 4 kg / cm2capacity : 1500 lpm , cylinderconnectingpipe ( pig tail ) supply, installation, testing and commissioning of cylinder connecting pipe ( pig tail ) made up of flexible ss hose with safety cord 5 / 8 inch bsp gland nut and one side 1 / 2 inch bsp internal threads having one meter length. ( oxygen 24 , n2o 10, co2 4 ) , backpressurecompensated [ bpc ] oxygen flowmeter supply, installation, testing and commissioning of back pressure compensated [ bpc ] oxygen flow meter body should be made of brass material dully chrome plated and graduated from 0 15 l / m on an expanded lower scale forprecision setting at low flow and 5 15 l / m for general use. the humidifier bottle should be made up of unbreakable polycarbonate / polysulphone material and autoclavable at 121 degree centigrade temperature. it should be ceand iso 13485 certified. , oxygen gas outletfront loadeddin / bsstd gas outlet front loaded din / bs std:supply, installation, testing and commissioning of din / british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din / british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din / bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , medical air ( 4 bar ) outletfront loadeddin / bsstd gas outlet front loaded din / bs std:supply, installation, testing and commissioning of din / british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din / british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din / bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , quickconnectadapter din / british standard quick connect oxygen adapter ( safety probe ) , tube oxygen h.p. rubber tube white color, , alarm supply, installation, testing and commissioningof area pressure alarm panel would be witdigital display, closed circuit, self monitoringtype. the alarm would be designed to monitorthe line pressure in piping systems.it should be ce and iso 13485 certified. withfour digit notified no. area line pressure alarm 1 gases , isolation valve, supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified.42mm , isolation valve 2 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 28mm , isolation valve 3 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 22mm , isolation valve 4 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 15mm , isolation valve 5 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 12mm , pipeline 1 medical grade copper pipeline ( in mtrs. ) as per en 13348, 12 mm ( od ) x 0.7 mm thickness , pipeline 2 medical grade copper pipeline ( in mtrs. ) as per en 13348, 15 mm ( od ) x 0.9 mm thickness , pipeline 3 medical grade copper pipeline ( in mtrs. ) as per en 13348, 22 mm ( od ) x 0.9 mm thickness , pipeline 4 medical grade copper pipeline ( in mtrs. ) as per en 13348, 28 mm ( od ) x 0.9 mm thickness , pipeline 5 medical grade copper pipeline ( in mtrs. ) as per en 13348, 42 mm ( od ) x 1.2 mm thickness , hospital sheet patient bedtype iii with mattress overall sizes: ( l ) 2268 mm x ( w ) 922 mm x ( h ) 610 mmdescription: sheet bed should be a plain bed used in the recovery ward.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board / leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral whiteperformance specifications: maximum patient load should be 135 kgthickness mattress: 3+sandwitchconstruction: round corners yeshitlon thickness ( mm ) : 60hitlondensity ( gm / dcm3 ) : 23coir ( both side ) thicknessmm: 20density ( gm / dcm3 ) : 70, drc ( % ) : 22quilting combination / layers:pilled foam – quilting ( one side ) thicknessmm 14pilled foam density gm / dcm3 18pu foam / epe sheet side walling thicknessmm 3total mattress thickness mm 87rexine ( gsm ) : 150note: * finish product thickness should be measure from outer to outer surface. tolerance +5 mm , paediatric bed with mattress paediatric bed of overall sizes in mm: 1500 ( l ) x 850 ( w ) x 1210 ( h ) flat single section bed with grille frame on 4 sides.suitable for children up to 12 years.drop down grill frame on both sides for protection of the patient.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board / leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral white , bed side locker type i over all dimension :402mmlx422mm wx840mm ht .locker should have one cabinet and one drawer unit .both provided with cam lock .there should be gap between drawer and unit to keep general items for frequesnt use castors are provided for easy handling .drawer made up of crca sheet 1 mm thick and has ball slide for easy operation .top ss 304 sheet 0.8 mm thick castors 50 mmdia , hamdle abs ..powder coating of epoxy polyester , medicinetrolleytype i overall size902mm ( l ) x532mm ( w ) x915mm ( h ) .top shelf should be made of ss 304 sheetof 1 mm thick. supporting legs made of ss304 tubesection 30.30 mm dia.of 1.2 mm thick provided to suppoort the entire structure.ss 304 tube provided at the bottom for placement of instument being used .handle made up of ss 304 tubeof dia dia 16 mmand thickness 1.2 mm provided to handle trolley .and maneuver accordingly. high endurance anti static plastic injection moulded castors of 125 mm dia.ss should be finished in glossy mirror finish. max load capacity of 10 kg / shelf udl , round stooltype i overall sizes diagonal legdia 538 mmh470 min 655max.ss 202 made sheet with spin section of thickness 1mm & should be non corrosive. it should have a diameter of 305mm, seat base is made of ms ring and rectangular tube.en8 screw having dia of 22 mm should be used for height adjustment of the seat base.the hub should be made of ms erw tube having dia of 38mm and thickness 2 mm.the hub should be welded with the legs and it should accommodate and cover the lead screw mechanism.the understructure should consist of 4 legs made up ofms erw tube of diameter 25.4 mm and 1.6mm thick. the press formed pipe leg should give a round & clean look. all the legs should be provided with 4 nos of nylon 6 bush.all metal componentsshould be pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbialepoxy polyster powder coating . all welding should be co2 argon welding to minimise rusting on the welding areas.safe working load must be 135kg , strecher on trolley type i 2005mm ( l ) x666mm ( w ) x827mm ( h ) .the trolley should be made of 31.75 and 25.4 mm dia 1.6 mm thick erw tube.holder for stretcher should be made up of mild steel.castor should be of 200 mm dia , diagonal locking castor.stretcher should be made up oferw tubeof dia 25.4 mm and thickness 1.6 mm.top sheet should be made of crca sheetof thickness 1.2 mm with contour shape to accommodate patient.iv pole holder should be made ofms .maximum safe work load should be 135 kg.to ensure qood quality welding co2 argonprocess should be adhered to.all metal componentsshould be pre treated with zinc phosphating in 9 tank porcess and then powder coated with anti microbialepoxy polyster powder coating.goods should be supplied in knocked down construction to reduce carbon emission. performance test :proof loading test , cycle tests , impact test, salt spray test, castor break test, the manufacturer should compilant with iso 9001, 14001, 13485, ohsas 1800 and ce certification. , doctor desk type x s / f / f executive table main desk should be of dimesion : 1350w x 750d x 750h.the table top should bein white cedar, side panelsin black, while the modestypanel ina combination of black & white cedar. side panels : ( black ) made form 18mm thick plt with pvc lipping.modesty panel : made form 18mm thick plt with pvc lipping. bigger upper panel in black and smaller lower panel in white cedar. made from 18mm thick plt with pvc lipping. mobile pedestal : one box and one filing drawer with 18mm thick plb fronts and top. handles : black powder coated die cast aluminum alloy handles. mobile pedestal and hdu are fitted with central lock. , chair type iii s / f / f executive chair1 ) seat / back assembly: the seat and back are made up of 1.2 cm. thick hot pressed plywood, upholstered withfabric upholstery covers and moulded polyurethane foam. the back foam is designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area.high back size : 47.5 cm ( w ) x 69.5 cm ( h ) seat size : 47.0 cm. ( w ) x 48.0 cm. ( d ) 2 ) polyurethane foam: the polyurethane foam is moulded with density = 45 + / 2 kg / m 3and hardness = 20 + / 2at 25% compression. 3 ) armrests: the one piece armrests are injection moulded from black co polymer polypropylene. 4 ) center tilt synchro mechanism : the mechanism is designed with the following features:• 360 revolving type. • upright position locking. • tilt tension adjustment.• seat / back tilting ratio of 1:3 ( 60 seat tilt / 180 back tilt ) . 5 ) pneumatic height adjustment : the pneumatic height adjustment has anadjustment stroke of 12.0 cm. 6 ) telescopic bellow assembly : the bellow is 3 piece telescopic type and injection moulded in black polypropylene. 7 ) pedestal assembly : . , staff / visitor chair type i chair of over all size: 58.0cm ( w ) x 56.5cm ( d ) x 87.5cm ( h ) & 48.0cm ( sh ) seat / back assembly: the seat and back are made from chemically treated and seasoned wood, upholstered with plywood, black leather cloth, and u foam.*back size: 46.0cm ( w ) x 27.0cm ( h ) .*seat size: 46.0cm ( w ) x 40.0cm ( d ) .armrest tube: the armrest tube is made of m.s. e.r.w. tube dia. 2.54cm. ( 1” ) x 16bg thick and powder coated.armrest: the armrest is gas assisted injection moulded from black polypropylene.understructure assembly: the understructure assembly is a cantilever type frame made of dia. 2.54cm. ( 1” ) x 14bg. thick m.s. e.r.w. tube and powder coated. , wheel chair type i ( l ) 790 x ( w ) 600 x ( h ) 870mm.foldable frame structure should be made of section 22diax1.2mm a3 carbon steel with chrome finish. cross bar should be made of a3 carbon steel with section 25.4 x 1.2mm.rear wheel:24 inch solid mag wheels with alloy in the rim .integrated handrim provide to drive the wheel chair of section 16x1.2mm a3 carbon steel with chrome finish.front wheel :8 inch hub made of pa polymer and outer with solid rubber.pu molded arm rest & base should be made of abs for better arm support .leatherite strap for calf rest & leatherite cushion for seat.adjustable alluminimum die cast foot rest with updown & swivel type mechanism.handles should be made of moulded rubber grip to push the wheelchair.hand brakes should be provided to lock the wheelchair at desired location.foot pressextended base with molded plastic for better grip.anti rust chrome finsh. safe work load of100 kg , basin stand type i ht 850 mm ss bowl ms tubular frame of dia 25.4 x1.2 mm tube work mounted on three 50 dia.non rusting castors all without brack. ss part finished with matt polish , kick buckettype i overa all dimension of the bucket should be 517 mm ( l ) x 517 mm ( w ) x 210 mm h.it should made of 12.7 mm dia and 1.6 mm thick ss 304 ring. the bowl should be ss made of .8 mm thck .3 nos 50 mm diahigh endurance plasticinjection moulded castors should be provided for the movement.mx load bearing capacity should be 10 kg. , hospital curtain tracks & i.v. tree system supply installation testing & commissioning of cubical tracks system made of powder coated aluminium alloy, stain free polyster fabric , water repellent curtains , smooth movement , non sticking runnner with stainless steel hooks made from mirror finish stainless steel , adjustable height with all accessories. total quantity : 1...
30457596 bids are invited for pile boring, providing and installation bored cast in situ reinforced cement concrete piles of grade m 25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using direct mud circulation ( dmc ) or bailer and chisel technique by tripod and mechanical winch machine all complete, including removal of excavated earth with all its lifts and leads ( length of pile for payment shall be measured up to bottom of pile cap ) .450mm dia piles ( inclusive of carriage ) , pcc providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering all work up to plinthlevel : 1:3:6 ( 1 cement : 3 coarse sand ( zone iii ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources ) ( inclusive of carriage ) , rcc providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland / portland slag cement, admixtures in recommended proportion as per is: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer in charge; for the following grades of concrete. note: extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re design the mix or bear the cost of extra cement. ( inclusive of carriage ) , brick work brick work with bricks of class designation 100a in foundations and plinthin :cement mortar 1:4 ( 1 cement : 4 coarse sand ) ( inclusive of carriage ) , sand filing supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. ( inclusive of carriage ) with lead upto 3 km , shuttering centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete , steel steel reinforcement for r.c.c. work ready to use cut and bend rebars of approved make from factory / workshop to construction site including placing in position and binding all complete thermo mechanically treated bars of grade fe 500d or more. , plinth protection making plinth protection 50mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand ( zone iii ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources ) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. , door & window providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, paneling and dash fasteners to be paid for separately ) :powder coated aluminium ( minimum thickness of powder coating 50 micron ) , glass providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) :with float glass panes of 5 mm thickness ( weight not less than 12.50 kg / sqm ) , upvc door providing and fixing of factory made upvc white colour casement door, upvc multichambered extruted frame, sash and mullion profile. frame duly reinforced with 1.2mm gi section box tpe chamber and sash with 1.5mm thick gi section ( ± 0.2mm ) based on wind load calculations ( shape and size according to upvc profiles ) , appropiate dimentions of upvc extruded glazing bead, epdm gasket ( k / o type ) , seperate drainage system, ss34 grade friction hinges 2d / 3d plate hinges, zinc alloy ( white powder coated ) casement handle, gi fastener 8x100 mm size for fixing frame to finish wall, plastic packer and caps and necessary steel screws etc.profile of frame and sash shall be metered cut and fusion welded at all corners, mullion shall be also fusion welded / joined mechanically including drilling of holes for fixing hardware and drainage of water etc. after fixing of frames , gap between frame and adjascent wall shall be filled with pu foaam / backer rod required size and the approved quantity. after that sealed with weather proof silicon sealant at both side, all complete as per approved drawing and direction of eic , door closer providing and fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ) , with necessary accessories and screws etc. complete. , door providing and fixing isi marked flush door shutters conforming to is : 2202 ( part i ) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including stainless steel butt hinges wirhnecessary screws , door stopper providing and fixing aluminium hanging floor door stopper, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour and shade, with necessary screws etc. complete. single rubber stopper , solling providing designation 100 a one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as perbuilding specification and direction of e / l, , tile 1 providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm , tile 2 providing and laying ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including pointing the joints with white cement and matching pigment etc., complete. , tile 3 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. , granite providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge :flamed finish granite stone slab jet black, cherry red, elitebrown, cat eye or equivalent. , false ceiling providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance ( rh ) of 99%, light reflectance ? 85%, thermal conductivity k = 0.052 0.057 w / m k, fire performance as per ( bs 476 pt 6 &7 ) in true horizontal level suspended on interlocking t grid of hot dipped all round galvanized iron section of 0.33 mm thick ( galvanized @120 gsm ) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item ( galvanised@80gsm ) 50 mm long 8mmouter diameter m 6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘t’ , pre fabsteel designing, providing, installing and fixing factory finished custom designed cold form light gauge steel framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. the steel sheet shall be galvanized ( az 150gms aluminium zinc alloy coated steel having minimum yield strength 300 550 mpa ) conforming to aisi specifications and ibc 2009 for cold formed steel framing and construction and also as per is: 875 1987, iso 800 1984 and is:801 1975. the wind load shall be as per provisions of is 875 ( part iii ) . lgsfs frame shall be designed as per is: 801 using commercially available software such as frame cad pro 11.7 / staad pro v8i / architekv2.5.16 / revit architecture 2011 or equivalent. proper usage of connection accessories like heavy duty tension ties, light duty hold ons, twist straps ( to connect truss with wall frames ) , strong tie, tie rod, h brackets, boxing sections, l shaped angles for better structural stability. the framing section shall be cold form c type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple / slot at required locations as per approved drawings. , pre fabwall providing and fixing of external wall system on light gauge steel frame work with outer face cement boards as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make. a groove of 2 mm to 3mm shall be maintained and grooves shall be sealed with silicon based sealant. the board shall be fixed in a staggered pattern. screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm and. internal face 12.5 mm thick gypsum plaster board fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. ( cost of frame work to be paid for separately ) outer face: outer face having 6mm thick fiber cement board fixed on 9mm thick fiber cement board, type a, as per is:14862:2000 ( high pressure steam cured ) inner face : 12.5 mm thick gypsum plaster board conforming to is 2095:2011 fixed on 8 mm thick fibre cement board confirming to is:14862:2000 of type b ( high pressure steam cured ) , pre fabin. wall providing and fixing internal wall panels on light gauge steel frame work with 12.5mm thick gypsum plaster board conforming is 2095:2011 fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make, screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. ( cost of frame work to be paid for separately , roof sheet supply & installation of precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by engineer in charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55mm ) with epdm seal or with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. , ridge plain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : ridges plain ( 500 600mm ) . , gutter drain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : gutter , flashing providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 5% total coated thickness ( tct ) , zinc coating 120gsm as per is: 277 in 240mpasteel grade, 5 7 microns epoxy primer on both side of the sheet and polyester topcoat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumenwashers complete :flashings / aprons. ( upto 600 mm ) , under deck insulation providing and fixing thermal insulation of ceiling ( under deck insulation ) with resin bonded rockwool conforming to is: 8183, density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to ceiling with metallic cleats ( 50x50x3 mm ) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. , resin bonded rock wool providing and fixing thermal insulation with resin bonded rock wool conforming to is: 8183, having density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to wall with screw, rawel plug & washers and held and in position by criss cossing gi wire etc. complete as per directions of engineerin charge. , face panel providing and fixing in all exterior face panels breathable vapour barrier underneath the cementfiber board as per national building code 2009 complete as per direction of engineer in charge. , lap siding supplying and installation of moisture resistant / fire resistantlap siding 8 mm thick and width as per standard sizes made ofiber cement board with embossed decorative finish to give pleasing exterior fixed horizontally with staggered joints including minimum over lapof 32 mm external cement fibre boardconforming to is 14862:2000 offixed with self drilling / taping screws / fastners of approved make. , putty providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distemper distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1 new work ( two or more coats ) over and including water tinnable priming coat with cement primer , ex. paint finishing walls with textured exterior paint of required shade : new work ( two or more coats applied @ 3.28 ltr / 10 sqm ) over and including priming coat of exterior primer applied @ 2.20kg / 10 sqm sqm , oil paint painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work . , steel 1 steel work in built up tubular ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. hot finished welded type tubes , excavation earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan ) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. , road providing and laying c.c. pavement of mix m 25 with ready mixed concrete from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc.complete as per specifications and directions of engineer in charge. ( the panel shuttering work shall be paid for separately ) . ( note: cement content considered in this item is @ 330 kg / cum. excess / less cement used as per design mix is payable / recoverableseparately ) . , paver block providing and laying 60 mm thick factory made cement concrete interlocking paver block of m 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thickcompacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer in charge. , phe 1 providing & fixing stone slab table rubbed, edges rounded and polished of size 75 x 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste 6mm nominal size ) as per engineer in charge and finished smooth white agaria marble stone , phe 2 providing and fixing salem stainless steel a isi 304 ( 18 / 8 ) kitchen sink as per is: 13983 with ci brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. kitchen sink with drain board510x1040mm bowl depth 200mm. , phe 4 providing and fixing mirror of superior glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing:rectangular shape 453x357 mm , phe 5 providing and fixing toilet paper holder:c.p. brass , phe 6 providing and fixing water closet squatting pan ( indian type w.c.pan ) with 100 mm sand cast iron p or s trap, 10 litre low fixturescomplete, including cutting and making good the walls andlevel whitep.v.c. flushing cistern, including flush pipe, with manually controlleddevice ( handle lever ) conforming to is : 7231, with all fittings andfloors wherever required :white vitreous china orissa pattern w.c. pan of size580x440 mm with integral type foot rests , phe 7 providing and fixing white vitreous china pedestal type water closet ( european type w.c. pan ) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device ( handle lever ) , conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : w.c. pan with isi marked white solid plastic seat and lid , phe 8 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer in charge , phe 9 providing and fixing cp brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge.. ( sink & urinal ) , phe 10 providing & fixingptmt towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealedfittings arrangement of approved quality and colour weighing not less than 88 gms , phe 11 providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms.15mm nominal bore , phe 12 providing and fixing c.p. brass bib cock of approved quality confirming to is:893115mm nominal bore , phe 13 providing and fixing c.p.brass angle valve for basin mixer and geyser points of approved quality conforming to is 8931 a ) 15 mm nominal bore.15 mm nominal bore , phe 14 providing and fixing wash bashin with c.i. brackets, 15mm dia cp brass singal hole basin mixer of approved quility and make, including painting of fittings and brackets, cutting and making good the walls wherever required white vitreous china surgeon type wash basin of size 660x460 mm with a pair of 15 mm c.p. brass pillar taps with elbow operated levers , phe 15 providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption ) , having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of engineer in charge.. , phe 16 providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. , phe 17 providing and fixing white vitreous china laboratory sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p brass waste and 40mm c.p. brass trap with necessary c.p. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :size 600x450x200 mm , phe 18 providing and fixing cp brass single lever telephonic wall mixer of quality & make as approved by engineer in charge . a ) 15 mm nominal dia. , phe 19 providing and fixing cp brass shower rose with 15 or 20 mm inlet100 mm diameter , phe 20 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. , phe 21 providing and fixing ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. , phe 22 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. ( internal work ) 40 mm dia, nominal bore , phe 23 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. ( internal work ) 50 mm dia, nominal bore , phe 24 two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand andmanufacturetwo more coast on new work , phe 25 p / f m.s. cap 100 mm dia , phe 26 providing and fixing, upvcpipes 6 kg / cm2 ( is: 4985 ) including all fittings ( plain or door ) e.g. bends, junction, offsets, access pieces, jointing with rubber ring / solvent cement joints includingrequired suports, cutting chase or holes in walls and floors and making good where required.75 mm dia pipe , phe 27 providing and fixing, upvcpipes 6 kg / cm2 ( is: 4985 ) including all fittings ( plain or door ) e.g. bends, junction, offsets, access pieces, jointing with rubber ring / solvent cement joints includingrequired suports, cutting chase or holes in walls and floors and making good where required.110 mm dia pipe , phe 28 providing & fixing on wall face unplasticised rigid pvc rain water pipes conforming to is:13592 tyape a included jointing with seal ring conforning to is:5382 leaving 10 mm gap for thermal expansion. ( i ) single socketed pipes.110 mm diameter , phe 29 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. coupler 110 mm diameter , phe 30 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. bend 87.5 deg 110 mm diameter , phe 31 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. shoe 110mm shoe , phe 32 providing & fixing unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50mm hard wood plugs, screwed with .m.s. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1cement : 4 coarse sand ) and making good the wall etc. complete.110 mm dia , phe 33 providing and fixing cpvc pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 20 mm nominal outer dia pipes , phe 34 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 25mm dia, nominal bore , phe 35 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 32 mm dia, nominal bore , phe 36 providing and fixing gun metal non return valve of approved quality ( pn 1.6 ) 40 nominal bore , phe 37 providing and fixing brass stop cock of approved quality15mm nominal bore , ex. phe 6 providing 250mm wide brick drain in cement mortar ( 1:6 ) with av. 150mm.clear depth and 250mm apron including cost of e / w. involved with 75mmcement concrete ( 1:4:8 ) over one brick designation 100 a flat soling inproper grade and slope at the base.the drain duly.plastered in cm. ( 1:3 ) with punning over exposed surface all complete as per buildingspecification and direction of e / l, , ex. phe 7 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil ( hard or soft ) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [ hard / dense soil ] pipes, cables etc.exceeding 80mm dia.but not exceeding 300mm dia. , ex. phe 8 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil ( hard or soft ) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [ hard / dense soil ] pipes, cables etc.exceeding 80mm dia. exceeding 300mm dia. , ex. phe 9 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 250 mm dia rcc pipe , ex. phe 10 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 300 mm dia rcc pipe , ex. phe 11 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 450 mm dia rcc pipe , ex. phe 12 inside size 120x90 cm and 90 cm deep including c.i. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg ) :with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , ex. phe 13 providing and fixing square mouth sw gully trap grade ‘a’ complete ci grating brick masonry chamber with bricks of class designation 75 and water tight ci cover with frame of 300 x 300 mm size ( inside ) the weight of cover to be not less than 13.00 kg and frame to be not less than 5 kg. as per standard design. ( cover min. 4.5 kg & frame min.2.7 kg ) 180x150 mm size p type with fps bricks , ex. phe 14 constructing masonry chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement:4 coarce sand ) for stop cock complete with c.i. surface box 100x100x75mm ( inside ) with locking arrangement and rcc top slab 1:2:4 mix ( 1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size ) necessary excavation foundation concret 1:5:10 ( 1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortor 1:3 ( 1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design. , ex. phe 15 constructing masonry chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement: 4 coarse sand ) for sluice valve, with c.i. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with channel lid and rcc top slab 1:2:4 mix ( 1 cement: 2 coarse sand: 4 graded stone sggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement: 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design:with f.p.s. bricks , ex. phe 16 structual steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , ex. phe 17 making connection of gi distribution branch with gi main of 50 80mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete. , rain water harvesting 1 boring / drilling bore well of required dia for casing / strainer pipe, bysuitable method prescribed in is:2800 ( part i ) , including collecting sample from different strata , preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , rain water harvesting 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , rain water harvesting 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150 mm nominal size dia , rain water harvesting 4 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 5 supplying, filling, spreading & levelling gravel of size range 5mm to 10mm, in recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 7 providing and fixing bail plug / bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 ( part i ) . 100 mm dia , rain water harvesting 8 making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , rain water harvesting 9 constructing soak pit 1.20x1.20x1.20 m filled with brickbats including s.w. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , tubewell 1 boring / drilling bore well of required dia for casing / strainer pipe, bysuitable method prescribed in is:2800 ( part i ) , including collecting sample from different strata , preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , tubewell 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , tubewell 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100mm nominal size dia , tubewell 4 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100 mm nominal size dia , tubewell 5 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , tubewell 6 providing and fixing bail plug / bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 ( part i ) . 100 mm dia , submersible pump 35m deep boring with casing and pipe. supply of pipe etc supplying & installation of suitable 2hp submersible pump b.s or k.s.bor equivalent make with finolex cable 1x3x2.5 squmm ( upto 50mtr ) withflexible conduit 25mm dia, electrical out door pannel with required electrical fitting such as mcb of 0 25amp ( havell or indocopp or mds make ) , volt & ampere meter ( ae make ) , single phase preventer ( minilac or vsp 1 make ) starter ( l&t or bch make ) etc of approved make, 40mm hdpe pipe ( 25 mtr ) and all accessories complete as per requirement of site. , water purifier and cooler 1 fitting and fixing single faucet storage type water cooler ( size 461 mm wide x 582 mm deep x 1217 mm height, weight 46 kg ) fully stainless body having storage capacity of 40 ltrs, cooling capacity of 40 ltrs. / hr. with hermetic type compressor, gas cooled motor equipped with over load protector, condensor for propeller type, thermostat autometically controlled temperature, refrigerent r 22, 230 volt, single phase 50 hertz, maximum current 2.3 amp including plug top and electrical lead wire connection upto 3 metres from the cooler, water inlet and drain out connections complete in all respects of voltas model no 40 / 40 tushar pss type or similar type of approved make. , water purifier and cooler 2 fitting and fixing water purifier for drinking purpose of capacity 6 litres / min, 5 purification system with reverse osmosis system with ultra ventilated membrane, tds500 to 2000 mgl / ppm, auto shut off with microswitch float manual flush facility, tds reduction 90% having automatic backwash system with filteration unit along with all accessories including plug top and electrical lead wire connection upto 3 metres from the purifier, water inlet and drain out connections complete in all respects similar to aquaguard or similar approved make ( model aquasure elegant ro water purifier of size width 360 mm x height 430 mm x depth 235 mm and weight 8.5 kg ) . , fire extinguisher 1 providing and fixing carbon di oxide type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. capacity 4.5 kg. , fire extinguisher 2 providing and fixing abc powder type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.capacity 6.0 kg. , electrical 1 wiring for light point / fan point / exhaust fan point / call bellpoint with 1.5 sq.mm frls pvc insulated copper conductorsingle core cable in surface / recessed steel conduit, withmodular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group c , electrical 2 wiring for twin control light point with 1.5 sq.mm frls pvcinsulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required. , electrical 3 wiring for group controlled ( looped ) light point / fan point / exhaust fan point / call bell point ( without independent switch etc. ) with 1.5 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, and earthing the point with 1.5 sq. mm frls pvc insulatedcopper conductor single core cable etc. as required. group c , pvc conduit 1 supplying and fixing of following sizes of medium class 20mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 2 supplying and fixing of following sizes of medium class 32mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 3 supplying and fixing of following sizes of medium class 50mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , electrical 4 wiring for light / power plug with 2x4 sq. mm frls pvcinsulated copper conductor single core cable in surface / recessed conduit alongwith 1 no. 4 sq. mm frls pvcinsulated copper conductor single core cable for loop earthingas required. , wiring frls pvc insulated copper conductor 1 2 x 2.5 sq. mm. + 1 x 2.5 sq. mm. earth wire , wiring frls pvc insulated copper conductor 2 2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire , wiring frls pvc insulated copper conductor 3 4 x 6 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 4 4 x 10 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 5 4 x 16 sq. mm + 2 x 16 sq. mm earth wire , s / f, gi box along with modular base & cover plate 1 or 2 module ( 75mm x 75mm ) , s / f, gi box along with modular base & cover plate 1 3 module ( 100mm x 75mm ) , s / f, gi box along with modular base & cover plate 2 4 module ( 125mmx75mm ) , s / f, gi box along with modular base & cover plate 3 6 module ( 200mm x 75mm ) , s / f, gi box along with modular base & cover plate 4 12 module ( 200mmx150mm ) , s / f modular switch / socket on the existing modular plate 5 / 6 amps switch , s / f modular switch / socket on the existing modular plate 2 15 / 16 amp switch , s / f modular switch / socket on the existing modular plate 3 3 pin 5 / 6 amp socket outlet , s / f modular switch / socket on the existing modular plate 4 6 pin 15 / 16 amp socket outlet , s / f modular switch / socket on the existing modular plate 5 telephone socket outlet , s / f modular switch / socket on the existing modular plate 6 tv antenna socket outlet , s / f modular switch / socket on the existing modular plate 7 bell push , electrical 5 supplying & fixing suitable size gi box wih modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, “c” curve including connections, painting etc. as required. ( for ac / geyser ) , electrical 6 supplying and drawing co axial tv cable rg 6 grade, 0.7 mm solid copper conductor pe insulated, shielded with fine tinned copper braid and protected with pvc sheath in the existing surface / recessed steel / pvc conduit as required. , electrical 7 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. , electrical 8 providing and fixing m.s. fan clamp type i or ii of 16 mm dia m.s. bar, bent to shape with hooked ends in r.c.c. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as required. , electrical 10 supplying and fixing 20 a, 240 v, spn industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 a c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. , electrical 11 supplying and fixing 20 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 12 supplying and fixing 30 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 13 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 8 way , double door , electrical 14 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 12 way , double door , electrical 15 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 16 way, double door , electrical 16 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 6 way ( 4 + 18 ) , double door , electrical 17 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 8 way ( 4 + 24 ) , double door , electrical 18 supplying and fixing of following ways surface / recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs ( but without mcbs and incomer ) as required . ( note : vertical type mcb tpdb is normally usedwhere 3 phase outlets are required. ) 4 way ( 4 + 12 ) , double door , 40 a, rccb supplying and fixing following rating, double pole, ( single phase and neutral ) , 240 v, residual current circuit breaker ( rccb ) , having a sensitivity current 30 ma in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a mcb supplying and fixing 40 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 40 tp mcb , single pole mcb supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 63a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 100a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , l / f pvc sheathed / xlpe power cable in trench laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 95 sq. mm and upto 185 sq. mm , l / f pvc sheathed / xlpe power cable in trench 1 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm , l / f pvc sheathed / xlpe power cable over cable tray upto 35 sq. mm ( clamped with 1mm thick saddle ) , l / f pvc sheathed / xlpe power cable over cable tray 2 above 35 sq. mm and upto 95 sq. mm ( clamped with 25x3mm ms flat clamp ) , l / f pvc sheathed / xlpe power cable over cable tray 3 above 95 sq. mm and upto 185 sq. mm ( clamped with 25 / 40x3mm ms flat clamp ) , l / f pvc sheathed / xlpe power cable over cable tray 4 above 185 sq. mm and upto 400 sq. mm ( clamped with 40x3mm ms flat clamp ) , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3.5c x 300 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 1 3.5c x 240 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 2 3.5c x 120 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3 3.5c x 95 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 4 3.5c x 50 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 5 4c x 35 sqmm aluminium conductor cable a2xfy , cable tray supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 100 mm width x 50 mm depth x 1.6 mm thickness , cable tray 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 300 mm width x 50 mm depth x 1.6 mm thickness , cable tray 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 600 mm width x 62.5 mm depth x 2.0 mm thickness , cable tray “bends” supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.100 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.150 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.300 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 3 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.450 mm width x 50 mm depth x 2 mm thickness , cable tray “bends” 4 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.600 mm width x 62.5 mm depth x 2.0 mm thickness , mv cable supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 300 sqmm, aluminium conductor cable a2xfy , mv cable 1 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 240 sqmm, aluminium conductor cable a2xfy , mv cable 2 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 120 sqmm, aluminium conductor cable a2xfy , mv cable 3 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 95 sqmm, aluminium conductor cable a2xfy , earthing earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required. , earthing 1 earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. , earthing 2 earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. , earthing 3 providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required. , earthing 4 providing and fixing 25 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required. , earthing 5 providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required. , earthing 6 providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for connections etc. as required. , fiting & fixtures 1 supply and installation of regular / standard model a.c. ceiling fan of 1400 mm sweep including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq. mm fr pvc insulated copper conductor etc as required. , fiting & fixtures 2 supplying and fixing single wall mounted 18 / 22 watt led type batten fitting complete with electronic driver and led tube etc directly on wall / ceiling includingconnections with 1.5 sq.mm fr pvc insulated copper conductor and earthing the body etc. as required. , fiting & fixtures 3 supply installation and comissioning ofintegrated batten made ( 2ft ) of ultra slim co extruded polycarbonate channel with housing part in white finish & diffuser part in reeded opal finish.white finish abs end caps with decorative circular coloured polycarbonate cap snap fitted on the end cap to enhance the aesthetic of the fixture. these end caps are snap fitted to the fixture.high efficiency long life led with lumen efficacy of 130 lm / w with viewing angle of 120º.powered by an integral isolated low thd electronic led driver ( smps based constant current supply ) with output short circuit protection, surge protection.can be fixed directly into the wall / ceiling by means of mounting ss clips provided with the fixture. ip 20, lumen output of 950 lumens with system efficacy of > 105lm / w .cri >80, color temperature 6500k, thd <20% and pf>0.95, ip20 . life class of 35, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz;internal surge protection:3 kv; protection including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. : reverse polarity, open & short circuit. driver safety requirement standards :is 15885 2 13, test report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source. cat ref havells :lumilinebs9wled840spcwh or approved equivalent. , fiting & fixtures 4 supplying and fixing recess mounted 12 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 5 supplying and fixing recess mounted 18 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 6 supply, installation, testing and commissioning of 400 mm sweep, 65w, blade material aluminium blades , speed & oscillation 3 speed, pull cord for speed and oscillation.air delivery minimum 72 m³ / min, speed minimun 1350 revolution per minute.suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. , fiting & fixtures 7 supply installation and comissioning of 28w 2x2 panel recess mounting luminaire with high performance leds, suitable for mounting with armstrong / grid ceiling.crca powder coated white after phosphochromate treatment.high efficiency long life led package in integral module with lumen efficacy of >100 lm / w and viewing angle of 120° to ensure better uniformity.powered by an independent isolated, selv output electronic led driver ( smps based constant current supply ) with output short circuit protection, surge protection & other reliability test. lumen output of 3450 lumens.cri >80, color temperature 5700k, thd <10% and pf >0.95, ip20, ik03.life class of 50, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz;internal surge protection:3 kv; protection including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. : reverse polarity, open & short circuit. driver safety requirement standards :is 15885 2 13, test report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source.cat ref havells :venusneohe2x2plr128wled857 or approved equivalent. , fiting & fixtures 8 supplying installation testing & commissioning ofb22 based 9w led 3 star bulb with 850 lumen, 6k color temperature including holder. , fiting & fixtures 9 supplying installation testing & commissioning of black painted extruded aluminium housing. green / red led’s mounted inside the housing. laser engraved signage matter on single / double acrylic sheet fixed on one side suitable for wall / ceiling / suspension type single / double sided display. in double sided version black paper is inserted. ni cd battery back up to 2 hrs. ( charged up to 8 10 hrs ) .mounting strings provided for pendent mounting operating voltage 150 280v ac ambient operating temperature. – 0 to 450c ingress protection – ip42.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. 220208 besl 03 led ssd wbb green 240 3 8wor220209 besl 03 led ssd wbb red 240 3 8wor220210 besl 03 led dsd wbb green 240 3 8wor220211 besl 03 led dsd wbb red 240 3 8w , fiting & fixtures 10 supply, installation, testing & erecting of ip66 bulkhead surface type lighting fixture 10w made up of pressure die cast aluminium housing and polyster powder coated die cast aluminium with high quality polycarbonate diffuser in opal finish for glare free light distribution.high efficiency long life led module with smd led package mounted on mcpcb with lumen efficacy of >95 lm / w with system lumen 950. powered by integral electronic led driver with apfc with low thd output short / open circuit protection. cct 5700, cri>80, system efficacy>90lm / w, thd<15%, pf>.95, ip66, ik 10, life class of 50, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. cat ref: havells : hexaft10wled857ssymbopc or approved equivalent. , civil & misc works1 providing and fixing m.v. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works2 providing and fixing h.t. danger notice plate of 250 mm x 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works3 supplying and making cable route marker with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm x 60 cm at the bottom and 50 cm x 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. , civil & misc works4 supplying and fixing cable route marker with 10 cm x 10 cm x 5 mm thick g.i. plate with inscription there on, bolted / welded to 35 mm x 35 mm x 6 mm angle iron, 60 cm long and fixing the same in ground as required. , civil & misc works5 providing & fixing in position 1000 mm wide , electrical insulating rubber mats as per is 15652:2006, 2 mm thick, suitable up to 1.1 kv , fire retardant, no effect of acids, alkalis and transformer oils, moisture proof, high tensile strengthandtexture finish / cloth impression ( anti slip , marking on top ) , civil & misc works6 supply & fixing shock treatment chart duly mounted on a wooden frame with 5 mm thick glass as required ( approx front area 1.20 sq metre ) , 40 kvaups supplying, installation, testing and commissioningof online double conversion fully microprocessor based , indoor type, compact ups system of following rating with igbt based pwm technology to achieve thd < 3% and input power factor of greater than 0.95 at 50% loading, suitable for three phase ac input voltage 380 v to 440 v, 50 hz +3% / 3 % and three phase ac output voltage 415 ± 1% volts & frequency 50 ± 0.5 hz , inbuilt isolation transformer, necessary vrla batteries of suitable size having 30 minutes back up time , mounting rack including and suitable size connecting cable ( for ups to battery and battery to battery ) , static and maintenance bypass switch, snmp card for rs232 / ethernet ip computability for operation and monitoring etc. with all components as mentioned , specifications, complete as required.note : concerning vendor needs to furnish the battery sizing calculations at the time of ga approval and battery size has to be as per the approved ga drawing. , external lighting 1 supply and erection of 4 metre height hot dipgalvanized octagonal street light pole with followingarm with top dia 70 mm and bottom dia a / f 130 mm, made of 3 mm thick sheet along with base plate of size220 x 220 x 12 mm , small door opening for junctionbox mounting with mcb & connector, cement concreteof 1:3:6 including excavation, refilling and suitable sizefoundation bolts with template and all complete jobasrequired. ( but without pole collar ) single arm , external lighting 2 supplying and fixing 40 / 45 watt led type street lightwith die cast aluminium housing for ingress protectionof ip65 and complete with all accessories etc, onpole / building including connection with fr pvcinsulated copper conductor cable and earthing thebody etc. as required. , ip based cctv system 1 sitc of 2 megapixel @ 25fps, h.265 ip bullet camera, 1 / 2.9 cmos with 2.8~12mm varifocal lens, 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 2 sitc of 2 megapixel @ 25fps, h.265 ip dome camera, 1 / 2.9 cmos with 3.6 fixed mm 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 3 sitc of 2 megapixel @ 25fps, ptz camera h.265 ip dome camera, 1 / 2.9 cmos with 2.6 fixed lenslux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 4 sitc of 32ch 4k ivr , h.265 / h.264 • 1080p real time • 4k display • dual lan • 8x hdd • raid •web plugin free h.265 / h.264 compression technology 4k display for clear monitoring up to 1080p 16ch decoding ability smart search ii smart vca event searchsupport raid 0, 1, 5 supported to prevent from recording data loss browsers supported: ie , smart functions : target count, electric fence, face detection, humaniod detection, retrograde detection, leave position detectio output, local & network backup etc. complete as required. , cctv 5 sitc of harddiskdrive8tb, 24 / 7surveillance category only complete etc as required.etc.all complete , cctv 6 sitc of 55 led narrow bazel for monitoring for nvr server etc. all complete. , cctv 7 sitc of rj 45 outlets near the cameras etc. all complete. etc. all complete. , cctv 8 sitc of cat 6 patch cords 1 meter high quality four pair twisted stranded cable terminated with rj45 modular plugs at both the ends. , signage 1 providing & fixing of building direction signage mounted on pole, with pole of 100x100mm shs ( square hollow section ) of height of 5600mm, and sign size of 900x1050, sign made of aluminiu c section of 60mm with internal framing to support the frame in ms tubes hollow section, frame work duly painted with anti rust coatings, with facia of 3mm thick exterior grade aluminium composite panel, cladded with uv cured digital printed retroreflective sheet of 3m make, and back panel of 3mm exterior grade acp, all pipes to be painted in approved color. cost shall includecost towards installation, including excuvation and filling up with specified pcc and fixing of foundation bolts as specified, also it shall include the designing charges.all complete as per direction by engineer in charge. , signage 4 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge , wall projected 250x210mm, both sides , signage 5 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge, door mounted, 300x80mm , 2 tr air conditioning 1 split ac ( inverter model ) : supply, installation, testing, commissioning of split type wall mounted air conditioning units of following capacity including inddor, outdoor unit fitted with inverter based rotary compressor fitted with rotary compressor, copper condensor and first charge refrigent r410a / eco friendly green gas only, all complete including all electrical connections to the electrical power supply system of the building, includingbut not limited to supply of all electrical plugs, etc., as necessary, lengthening of all electrical wires of ac units ( both indoor and outdoor ) , drain pipe andincluding suitable voltage stabilisers, etc. so as to place them in a concealed manner in the desired position. the copper pipes and electrical cables shall be concealed in approved manner and neatly run in straight lines in a workman like manner with proper supports. complete supply and installation of split2 tr star rating 3 star , refrigerant piping copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 25 mm od, wall thickness >= 1.2 mm ( insulation 19 mm thick ) , refrigerant piping 1 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 19.1 mm od, wall thickness >= 1.0 mm ( insulation 13 mm thick ) , refrigerant piping 2 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 15.9 mm od, wall thickness >= 0.8 mm ( insulation 13 mm thick ) , refrigerant piping 3 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 9.5 mm od, wall thickness >= 0.8 mm ( insulation 13 mm thick ) , drain piping providing and fixing of cpvc 6 kg / cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 20 mm , drain piping 1 providing and fixing of cpvc 6 kg / cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 32 mm , main oxygen manifold supply, installation, testing and commissioning of following gas manifold system ( excluding cylinders ) . the manifold is configured for designed numbers of cylinders and is suitable to withstand a pressure of 145 kg / cm2, along withhigh pressure copper annealed tail pipes with end brass adapter suitable for cylinders and manifold. top frame comprising of high pressure copper pipes of size 1 / 2” nb x 15swg with high pressure brass fittings made of high tensile brass and connections through nonreturn valves, the design of middle and bottomframes is provided to fit both round and flat bottom cylinders safely. the manifold is tested ( hydraulically ) at 3500 psig. ( it should be ce and iso 13485 certified ) mani fold oxygen manifold 6 + 6 cylinder banks complete with nrv, middle frame, bottom frame with ce marked, , emergency manifold emergency oxygen manifold 01 + 01 cylinder emergency manifold with complete regulator, nrv, middle frame & bottom frame, , control panelfor oxygen fully automatic three port control panel for oxygen supply, installation, testing and commissioning of automatic manifold control panel would provide a duty or standby gas supply from two cylinder banks with automaticchangeover the manifold indicates local status and has a remote indicator facility. automaticmanifold control panel would be designed to supply the mgps with a constant pressure supply via a control panel form two equal banks of cylinders and the changeover from the ‘duty’ to the ‘standby’ bank of cylinders would beautomatic. automatic changeover from the duty to the standby bank would occur at a cylinder pressure that will ensure the maximum usage of the contents of the duty bank. the changeover unit would be provided with monitoring todetect and display: duty bank operating, duty bank empty, standby bank operating, and standby bank below 10 % when the duty bank is empty, reserve bank low, pipeline pressure fault. there would be facility to connect liquidoxygen supply ( i.e. three port control panel ) ( it should be ce and iso 13485 certified ) fully automatic three port control panel for oxygen , emergency manifold line regulator emergency manifold line regulator supply, installation, testing and commissioning of emergency manifold line regulator i n p u t p r e s s u r e 1 5 0 k g / c m 2 working pressure 4 kg / cm2 it should be ce and iso 13485 certified.oxygen input pressure 150 kg / cm2 working pressure 4 kg / cm2capacity : 1500 lpm , cylinderconnectingpipe ( pig tail ) supply, installation, testing and commissioning of cylinder connecting pipe ( pig tail ) made up of flexible ss hose with safety cord 5 / 8 inch bsp gland nut and one side 1 / 2 inch bsp internal threads having one meter length. ( oxygen 24 , n2o 10, co2 4 ) , backpressurecompensated [ bpc ] oxygen flowmeter supply, installation, testing and commissioning of back pressure compensated [ bpc ] oxygen flow meter body should be made of brass material dully chrome plated and graduated from 0 15 l / m on an expanded lower scale forprecision setting at low flow and 5 15 l / m for general use. the humidifier bottle should be made up of unbreakable polycarbonate / polysulphone material and autoclavable at 121 degree centigrade temperature. it should be ceand iso 13485 certified. , oxygen gas outletfront loadeddin / bsstd gas outlet front loaded din / bs std:supply, installation, testing and commissioning of din / british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din / british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din / bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , medical air ( 4 bar ) outletfront loadeddin / bsstd gas outlet front loaded din / bs std:supply, installation, testing and commissioning of din / british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din / british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din / bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , quickconnectadapter din / british standard quick connect oxygen adapter ( safety probe ) , tube oxygen h.p. rubber tube white color, , alarm supply, installation, testing and commissioningof area pressure alarm panel would be witdigital display, closed circuit, self monitoringtype. the alarm would be designed to monitorthe line pressure in piping systems.it should be ce and iso 13485 certified. withfour digit notified no. area line pressure alarm 1 gases , isolation valve, supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified.42mm , isolation valve 2 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 28mm , isolation valve 3 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 22mm , isolation valve 4 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 15mm , isolation valve 5 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 12mm , pipeline 1 medical grade copper pipeline ( in mtrs. ) as per en 13348, 12 mm ( od ) x 0.7 mm thickness , pipeline 2 medical grade copper pipeline ( in mtrs. ) as per en 13348, 15 mm ( od ) x 0.9 mm thickness , pipeline 3 medical grade copper pipeline ( in mtrs. ) as per en 13348, 22 mm ( od ) x 0.9 mm thickness , pipeline 4 medical grade copper pipeline ( in mtrs. ) as per en 13348, 28 mm ( od ) x 0.9 mm thickness , pipeline 5 medical grade copper pipeline ( in mtrs. ) as per en 13348, 42 mm ( od ) x 1.2 mm thickness , hospital sheet patient bedtype iii with mattress overall sizes: ( l ) 2268 mm x ( w ) 922 mm x ( h ) 610 mmdescription: sheet bed should be a plain bed used in the recovery ward.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board / leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral whiteperformance specifications: maximum patient load should be 135 kgthickness mattress: 3+sandwitchconstruction: round corners yeshitlon thickness ( mm ) : 60hitlondensity ( gm / dcm3 ) : 23coir ( both side ) thicknessmm: 20density ( gm / dcm3 ) : 70, drc ( % ) : 22quilting combination / layers:pilled foam – quilting ( one side ) thicknessmm 14pilled foam density gm / dcm3 18pu foam / epe sheet side walling thicknessmm 3total mattress thickness mm 87rexine ( gsm ) : 150note: * finish product thickness should be measure from outer to outer surface. tolerance +5 mm , paediatric bed with mattress paediatric bed of overall sizes in mm: 1500 ( l ) x 850 ( w ) x 1210 ( h ) flat single section bed with grille frame on 4 sides.suitable for children up to 12 years.drop down grill frame on both sides for protection of the patient.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board / leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral white , bed side locker type i over all dimension :402mmlx422mm wx840mm ht .locker should have one cabinet and one drawer unit .both provided with cam lock .there should be gap between drawer and unit to keep general items for frequesnt use castors are provided for easy handling .drawer made up of crca sheet 1 mm thick and has ball slide for easy operation .top ss 304 sheet 0.8 mm thick castors 50 mmdia , hamdle abs ..powder coating of epoxy polyester , medicinetrolleytype i overall size902mm ( l ) x532mm ( w ) x915mm ( h ) .top shelf should be made of ss 304 sheetof 1 mm thick. supporting legs made of ss304 tubesection 30.30 mm dia.of 1.2 mm thick provided to suppoort the entire structure.ss 304 tube provided at the bottom for placement of instument being used .handle made up of ss 304 tubeof dia dia 16 mmand thickness 1.2 mm provided to handle trolley .and maneuver accordingly. high endurance anti static plastic injection moulded castors of 125 mm dia.ss should be finished in glossy mirror finish. max load capacity of 10 kg / shelf udl , round stooltype i overall sizes diagonal legdia 538 mmh470 min 655max.ss 202 made sheet with spin section of thickness 1mm & should be non corrosive. it should have a diameter of 305mm, seat base is made of ms ring and rectangular tube.en8 screw having dia of 22 mm should be used for height adjustment of the seat base.the hub should be made of ms erw tube having dia of 38mm and thickness 2 mm.the hub should be welded with the legs and it should accommodate and cover the lead screw mechanism.the understructure should consist of 4 legs made up ofms erw tube of diameter 25.4 mm and 1.6mm thick. the press formed pipe leg should give a round & clean look. all the legs should be provided with 4 nos of nylon 6 bush.all metal componentsshould be pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbialepoxy polyster powder coating . all welding should be co2 argon welding to minimise rusting on the welding areas.safe working load must be 135kg , strecher on trolley type i 2005mm ( l ) x666mm ( w ) x827mm ( h ) .the trolley should be made of 31.75 and 25.4 mm dia 1.6 mm thick erw tube.holder for stretcher should be made up of mild steel.castor should be of 200 mm dia , diagonal locking castor.stretcher should be made up oferw tubeof dia 25.4 mm and thickness 1.6 mm.top sheet should be made of crca sheetof thickness 1.2 mm with contour shape to accommodate patient.iv pole holder should be made ofms .maximum safe work load should be 135 kg.to ensure qood quality welding co2 argonprocess should be adhered to.all metal componentsshould be pre treated with zinc phosphating in 9 tank porcess and then powder coated with anti microbialepoxy polyster powder coating.goods should be supplied in knocked down construction to reduce carbon emission. performance test :proof loading test , cycle tests , impact test, salt spray test, castor break test, the manufacturer should compilant with iso 9001, 14001, 13485, ohsas 1800 and ce certification. , doctor desk type x s / f / f executive table main desk should be of dimesion : 1350w x 750d x 750h.the table top should bein white cedar, side panelsin black, while the modestypanel ina combination of black & white cedar. side panels : ( black ) made form 18mm thick plt with pvc lipping.modesty panel : made form 18mm thick plt with pvc lipping. bigger upper panel in black and smaller lower panel in white cedar. made from 18mm thick plt with pvc lipping. mobile pedestal : one box and one filing drawer with 18mm thick plb fronts and top. handles : black powder coated die cast aluminum alloy handles. mobile pedestal and hdu are fitted with central lock. , chair type iii s / f / f executive chair1 ) seat / back assembly: the seat and back are made up of 1.2 cm. thick hot pressed plywood, upholstered withfabric upholstery covers and moulded polyurethane foam. the back foam is designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area.high back size : 47.5 cm ( w ) x 69.5 cm ( h ) seat size : 47.0 cm. ( w ) x 48.0 cm. ( d ) 2 ) polyurethane foam: the polyurethane foam is moulded with density = 45 + / 2 kg / m 3and hardness = 20 + / 2at 25% compression. 3 ) armrests: the one piece armrests are injection moulded from black co polymer polypropylene. 4 ) center tilt synchro mechanism : the mechanism is designed with the following features:• 360 revolving type. • upright position locking. • tilt tension adjustment.• seat / back tilting ratio of 1:3 ( 60 seat tilt / 180 back tilt ) . 5 ) pneumatic height adjustment : the pneumatic height adjustment has anadjustment stroke of 12.0 cm. 6 ) telescopic bellow assembly : the bellow is 3 piece telescopic type and injection moulded in black polypropylene. 7 ) pedestal assembly : . , staff / visitor chair type i chair of over all size: 58.0cm ( w ) x 56.5cm ( d ) x 87.5cm ( h ) & 48.0cm ( sh ) seat / back assembly: the seat and back are made from chemically treated and seasoned wood, upholstered with plywood, black leather cloth, and u foam.*back size: 46.0cm ( w ) x 27.0cm ( h ) .*seat size: 46.0cm ( w ) x 40.0cm ( d ) .armrest tube: the armrest tube is made of m.s. e.r.w. tube dia. 2.54cm. ( 1” ) x 16bg thick and powder coated.armrest: the armrest is gas assisted injection moulded from black polypropylene.understructure assembly: the understructure assembly is a cantilever type frame made of dia. 2.54cm. ( 1” ) x 14bg. thick m.s. e.r.w. tube and powder coated. , wheel chair type i ( l ) 790 x ( w ) 600 x ( h ) 870mm.foldable frame structure should be made of section 22diax1.2mm a3 carbon steel with chrome finish. cross bar should be made of a3 carbon steel with section 25.4 x 1.2mm.rear wheel:24 inch solid mag wheels with alloy in the rim .integrated handrim provide to drive the wheel chair of section 16x1.2mm a3 carbon steel with chrome finish.front wheel :8 inch hub made of pa polymer and outer with solid rubber.pu molded arm rest & base should be made of abs for better arm support .leatherite strap for calf rest & leatherite cushion for seat.adjustable alluminimum die cast foot rest with updown & swivel type mechanism.handles should be made of moulded rubber grip to push the wheelchair.hand brakes should be provided to lock the wheelchair at desired location.foot pressextended base with molded plastic for better grip.anti rust chrome finsh. safe work load of100 kg , basin stand type i ht 850 mm ss bowl ms tubular frame of dia 25.4 x1.2 mm tube work mounted on three 50 dia.non rusting castors all without brack. ss part finished with matt polish , kick buckettype i overa all dimension of the bucket should be 517 mm ( l ) x 517 mm ( w ) x 210 mm h.it should made of 12.7 mm dia and 1.6 mm thick ss 304 ring. the bowl should be ss made of .8 mm thck .3 nos 50 mm diahigh endurance plasticinjection moulded castors should be provided for the movement.mx load bearing capacity should be 10 kg. , hospital curtain tracks & i.v. tree system supply installation testing & commissioning of cubical tracks system made of powder coated aluminium alloy, stain free polyster fabric , water repellent curtains , smooth movement , non sticking runnner with stainless steel hooks made from mirror finish stainless steel , adjustable height with all accessories. total quantity : 1...
30457511 bids are invited for pile boring, providing and installation bored cast in situ reinforced cement concrete piles of grade m 25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using direct mud circulation ( dmc ) or bailer and chisel technique by tripod and mechanical winch machine all complete, including removal of excavated earth with all its lifts and leads ( length of pile for payment shall be measured up to bottom of pile cap ) .450mm dia piles ( inclusive of carriage ) , pcc providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering all work up to plinthlevel : 1:3:6 ( 1 cement : 3 coarse sand ( zone iii ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources ) ( inclusive of carriage ) , rcc providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland / portland slag cement, admixtures in recommended proportion as per is: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer in charge; for the following grades of concrete. note: extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re design the mix or bear the cost of extra cement. ( inclusive of carriage ) , brick work brick work with bricks of class designation 100a in foundations and plinthin :cement mortar 1:4 ( 1 cement : 4 coarse sand ) ( inclusive of carriage ) , sand filing supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. ( inclusive of carriage ) with lead upto 3 km , shuttering centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete , steel steel reinforcement for r.c.c. work ready to use cut and bend rebars of approved make from factory / workshop to construction site including placing in position and binding all complete thermo mechanically treated bars of grade fe 500d or more. , plinth protection making plinth protection 50mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand ( zone iii ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources ) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. , door & window providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, paneling and dash fasteners to be paid for separately ) :powder coated aluminium ( minimum thickness of powder coating 50 micron ) , glass providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) :with float glass panes of 5 mm thickness ( weight not less than 12.50 kg / sqm ) , upvc door providing and fixing of factory made upvc white colour casement door, upvc multichambered extruted frame, sash and mullion profile. frame duly reinforced with 1.2mm gi section box tpe chamber and sash with 1.5mm thick gi section ( ± 0.2mm ) based on wind load calculations ( shape and size according to upvc profiles ) , appropiate dimentions of upvc extruded glazing bead, epdm gasket ( k / o type ) , seperate drainage system, ss34 grade friction hinges 2d / 3d plate hinges, zinc alloy ( white powder coated ) casement handle, gi fastener 8x100 mm size for fixing frame to finish wall, plastic packer and caps and necessary steel screws etc.profile of frame and sash shall be metered cut and fusion welded at all corners, mullion shall be also fusion welded / joined mechanically including drilling of holes for fixing hardware and drainage of water etc. after fixing of frames , gap between frame and adjascent wall shall be filled with pu foaam / backer rod required size and the approved quantity. after that sealed with weather proof silicon sealant at both side, all complete as per approved drawing and direction of eic , door closer providing and fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ) , with necessary accessories and screws etc. complete. , door providing and fixing isi marked flush door shutters conforming to is : 2202 ( part i ) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including stainless steel butt hinges wirhnecessary screws , door stopper providing and fixing aluminium hanging floor door stopper, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour and shade, with necessary screws etc. complete. single rubber stopper , solling providing designation 100 a one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as perbuilding specification and direction of e / l, , tile 1 providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm , tile 2 providing and laying ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including pointing the joints with white cement and matching pigment etc., complete. , tile 3 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. , granite providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge :flamed finish granite stone slab jet black, cherry red, elitebrown, cat eye or equivalent. , false ceiling providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance ( rh ) of 99%, light reflectance ? 85%, thermal conductivity k = 0.052 0.057 w / m k, fire performance as per ( bs 476 pt 6 &7 ) in true horizontal level suspended on interlocking t grid of hot dipped all round galvanized iron section of 0.33 mm thick ( galvanized @120 gsm ) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item ( galvanised@80gsm ) 50 mm long 8mmouter diameter m 6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘t’ , pre fabsteel designing, providing, installing and fixing factory finished custom designed cold form light gauge steel framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. the steel sheet shall be galvanized ( az 150gms aluminium zinc alloy coated steel having minimum yield strength 300 550 mpa ) conforming to aisi specifications and ibc 2009 for cold formed steel framing and construction and also as per is: 875 1987, iso 800 1984 and is:801 1975. the wind load shall be as per provisions of is 875 ( part iii ) . lgsfs frame shall be designed as per is: 801 using commercially available software such as frame cad pro 11.7 / staad pro v8i / architekv2.5.16 / revit architecture 2011 or equivalent. proper usage of connection accessories like heavy duty tension ties, light duty hold ons, twist straps ( to connect truss with wall frames ) , strong tie, tie rod, h brackets, boxing sections, l shaped angles for better structural stability. the framing section shall be cold form c type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple / slot at required locations as per approved drawings. , pre fabwall providing and fixing of external wall system on light gauge steel frame work with outer face cement boards as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make. a groove of 2 mm to 3mm shall be maintained and grooves shall be sealed with silicon based sealant. the board shall be fixed in a staggered pattern. screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm and. internal face 12.5 mm thick gypsum plaster board fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. ( cost of frame work to be paid for separately ) outer face: outer face having 6mm thick fiber cement board fixed on 9mm thick fiber cement board, type a, as per is:14862:2000 ( high pressure steam cured ) inner face : 12.5 mm thick gypsum plaster board conforming to is 2095:2011 fixed on 8 mm thick fibre cement board confirming to is:14862:2000 of type b ( high pressure steam cured ) , pre fabin. wall providing and fixing internal wall panels on light gauge steel frame work with 12.5mm thick gypsum plaster board conforming is 2095:2011 fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make, screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. ( cost of frame work to be paid for separately , roof sheet supply & installation of precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by engineer in charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55mm ) with epdm seal or with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. , ridge plain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : ridges plain ( 500 600mm ) . , gutter drain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : gutter , flashing providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 5% total coated thickness ( tct ) , zinc coating 120gsm as per is: 277 in 240mpasteel grade, 5 7 microns epoxy primer on both side of the sheet and polyester topcoat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumenwashers complete :flashings / aprons. ( upto 600 mm ) , under deck insulation providing and fixing thermal insulation of ceiling ( under deck insulation ) with resin bonded rockwool conforming to is: 8183, density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to ceiling with metallic cleats ( 50x50x3 mm ) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. , resin bonded rock wool providing and fixing thermal insulation with resin bonded rock wool conforming to is: 8183, having density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to wall with screw, rawel plug & washers and held and in position by criss cossing gi wire etc. complete as per directions of engineerin charge. , face panel providing and fixing in all exterior face panels breathable vapour barrier underneath the cementfiber board as per national building code 2009 complete as per direction of engineer in charge. , lap siding supplying and installation of moisture resistant / fire resistantlap siding 8 mm thick and width as per standard sizes made ofiber cement board with embossed decorative finish to give pleasing exterior fixed horizontally with staggered joints including minimum over lapof 32 mm external cement fibre boardconforming to is 14862:2000 offixed with self drilling / taping screws / fastners of approved make. , putty providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distemper distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1 new work ( two or more coats ) over and including water tinnable priming coat with cement primer , ex. paint finishing walls with textured exterior paint of required shade : new work ( two or more coats applied @ 3.28 ltr / 10 sqm ) over and including priming coat of exterior primer applied @ 2.20kg / 10 sqm sqm , oil paint painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work . , steel 1 steel work in built up tubular ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. hot finished welded type tubes , excavation earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan ) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. , road providing and laying c.c. pavement of mix m 25 with ready mixed concrete from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc.complete as per specifications and directions of engineer in charge. ( the panel shuttering work shall be paid for separately ) . ( note: cement content considered in this item is @ 330 kg / cum. excess / less cement used as per design mix is payable / recoverableseparately ) . , paver block providing and laying 60 mm thick factory made cement concrete interlocking paver block of m 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thickcompacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer in charge. , phe 1 providing & fixing stone slab table rubbed, edges rounded and polished of size 75 x 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste 6mm nominal size ) as per engineer in charge and finished smooth white agaria marble stone , phe 2 providing and fixing salem stainless steel a isi 304 ( 18 / 8 ) kitchen sink as per is: 13983 with ci brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. kitchen sink with drain board510x1040mm bowl depth 200mm. , phe 4 providing and fixing mirror of superior glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing:rectangular shape 453x357 mm , phe 5 providing and fixing toilet paper holder:c.p. brass , phe 6 providing and fixing water closet squatting pan ( indian type w.c.pan ) with 100 mm sand cast iron p or s trap, 10 litre low fixturescomplete, including cutting and making good the walls andlevel whitep.v.c. flushing cistern, including flush pipe, with manually controlleddevice ( handle lever ) conforming to is : 7231, with all fittings andfloors wherever required :white vitreous china orissa pattern w.c. pan of size580x440 mm with integral type foot rests , phe 7 providing and fixing white vitreous china pedestal type water closet ( european type w.c. pan ) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device ( handle lever ) , conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : w.c. pan with isi marked white solid plastic seat and lid , phe 8 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer in charge , phe 9 providing and fixing cp brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge.. ( sink & urinal ) , phe 10 providing & fixingptmt towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealedfittings arrangement of approved quality and colour weighing not less than 88 gms , phe 11 providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms.15mm nominal bore , phe 12 providing and fixing c.p. brass bib cock of approved quality confirming to is:893115mm nominal bore , phe 13 providing and fixing c.p.brass angle valve for basin mixer and geyser points of approved quality conforming to is 8931 a ) 15 mm nominal bore.15 mm nominal bore , phe 14 providing and fixing wash bashin with c.i. brackets, 15mm dia cp brass singal hole basin mixer of approved quility and make, including painting of fittings and brackets, cutting and making good the walls wherever required white vitreous china surgeon type wash basin of size 660x460 mm with a pair of 15 mm c.p. brass pillar taps with elbow operated levers , phe 15 providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption ) , having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of engineer in charge.. , phe 16 providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. , phe 17 providing and fixing white vitreous china laboratory sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p brass waste and 40mm c.p. brass trap with necessary c.p. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :size 600x450x200 mm , phe 18 providing and fixing cp brass single lever telephonic wall mixer of quality & make as approved by engineer in charge . a ) 15 mm nominal dia. , phe 19 providing and fixing cp brass shower rose with 15 or 20 mm inlet100 mm diameter , phe 20 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. , phe 21 providing and fixing ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. , phe 22 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. ( internal work ) 40 mm dia, nominal bore , phe 23 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. ( internal work ) 50 mm dia, nominal bore , phe 24 two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand andmanufacturetwo more coast on new work , phe 25 p / f m.s. cap 100 mm dia , phe 26 providing and fixing, upvcpipes 6 kg / cm2 ( is: 4985 ) including all fittings ( plain or door ) e.g. bends, junction, offsets, access pieces, jointing with rubber ring / solvent cement joints includingrequired suports, cutting chase or holes in walls and floors and making good where required.75 mm dia pipe , phe 27 providing and fixing, upvcpipes 6 kg / cm2 ( is: 4985 ) including all fittings ( plain or door ) e.g. bends, junction, offsets, access pieces, jointing with rubber ring / solvent cement joints includingrequired suports, cutting chase or holes in walls and floors and making good where required.110 mm dia pipe , phe 28 providing & fixing on wall face unplasticised rigid pvc rain water pipes conforming to is:13592 tyape a included jointing with seal ring conforning to is:5382 leaving 10 mm gap for thermal expansion. ( i ) single socketed pipes.110 mm diameter , phe 29 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. coupler 110 mm diameter , phe 30 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. bend 87.5 deg 110 mm diameter , phe 31 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. shoe 110mm shoe , phe 32 providing & fixing unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50mm hard wood plugs, screwed with .m.s. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1cement : 4 coarse sand ) and making good the wall etc. complete.110 mm dia , phe 33 providing and fixing cpvc pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 20 mm nominal outer dia pipes , phe 34 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 25mm dia, nominal bore , phe 35 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 32 mm dia, nominal bore , phe 36 providing and fixing gun metal non return valve of approved quality ( pn 1.6 ) 40 nominal bore , phe 37 providing and fixing brass stop cock of approved quality15mm nominal bore , ex. phe 6 providing 250mm wide brick drain in cement mortar ( 1:6 ) with av. 150mm.clear depth and 250mm apron including cost of e / w. involved with 75mmcement concrete ( 1:4:8 ) over one brick designation 100 a flat soling inproper grade and slope at the base.the drain duly.plastered in cm. ( 1:3 ) with punning over exposed surface all complete as per buildingspecification and direction of e / l, , ex. phe 7 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil ( hard or soft ) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [ hard / dense soil ] pipes, cables etc.exceeding 80mm dia.but not exceeding 300mm dia. , ex. phe 8 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil ( hard or soft ) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [ hard / dense soil ] pipes, cables etc.exceeding 80mm dia. exceeding 300mm dia. , ex. phe 9 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 250 mm dia rcc pipe , ex. phe 10 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 300 mm dia rcc pipe , ex. phe 11 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 450 mm dia rcc pipe , ex. phe 12 inside size 120x90 cm and 90 cm deep including c.i. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg ) :with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , ex. phe 13 providing and fixing square mouth sw gully trap grade ‘a’ complete ci grating brick masonry chamber with bricks of class designation 75 and water tight ci cover with frame of 300 x 300 mm size ( inside ) the weight of cover to be not less than 13.00 kg and frame to be not less than 5 kg. as per standard design. ( cover min. 4.5 kg & frame min.2.7 kg ) 180x150 mm size p type with fps bricks , ex. phe 14 constructing masonry chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement:4 coarce sand ) for stop cock complete with c.i. surface box 100x100x75mm ( inside ) with locking arrangement and rcc top slab 1:2:4 mix ( 1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size ) necessary excavation foundation concret 1:5:10 ( 1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortor 1:3 ( 1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design. , ex. phe 15 constructing masonry chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement: 4 coarse sand ) for sluice valve, with c.i. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with channel lid and rcc top slab 1:2:4 mix ( 1 cement: 2 coarse sand: 4 graded stone sggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement: 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design:with f.p.s. bricks , ex. phe 16 structual steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , ex. phe 17 making connection of gi distribution branch with gi main of 50 80mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete. , rain water harvesting 1 boring / drilling bore well of required dia for casing / strainer pipe, bysuitable method prescribed in is:2800 ( part i ) , including collecting sample from different strata , preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , rain water harvesting 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , rain water harvesting 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150 mm nominal size dia , rain water harvesting 4 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 5 supplying, filling, spreading & levelling gravel of size range 5mm to 10mm, in recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 7 providing and fixing bail plug / bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 ( part i ) . 100 mm dia , rain water harvesting 8 making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , rain water harvesting 9 constructing soak pit 1.20x1.20x1.20 m filled with brickbats including s.w. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , tubewell 1 boring / drilling bore well of required dia for casing / strainer pipe, bysuitable method prescribed in is:2800 ( part i ) , including collecting sample from different strata , preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , tubewell 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , tubewell 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100mm nominal size dia , tubewell 4 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100 mm nominal size dia , tubewell 5 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , tubewell 6 providing and fixing bail plug / bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 ( part i ) . 100 mm dia , submersible pump 35m deep boring with casing and pipe. supply of pipe etc supplying & installation of suitable 2hp submersible pump b.s or k.s.bor equivalent make with finolex cable 1x3x2.5 squmm ( upto 50mtr ) withflexible conduit 25mm dia, electrical out door pannel with required electrical fitting such as mcb of 0 25amp ( havell or indocopp or mds make ) , volt & ampere meter ( ae make ) , single phase preventer ( minilac or vsp 1 make ) starter ( l&t or bch make ) etc of approved make, 40mm hdpe pipe ( 25 mtr ) and all accessories complete as per requirement of site. , water purifier and cooler 1 fitting and fixing single faucet storage type water cooler ( size 461 mm wide x 582 mm deep x 1217 mm height, weight 46 kg ) fully stainless body having storage capacity of 40 ltrs, cooling capacity of 40 ltrs. / hr. with hermetic type compressor, gas cooled motor equipped with over load protector, condensor for propeller type, thermostat autometically controlled temperature, refrigerent r 22, 230 volt, single phase 50 hertz, maximum current 2.3 amp including plug top and electrical lead wire connection upto 3 metres from the cooler, water inlet and drain out connections complete in all respects of voltas model no 40 / 40 tushar pss type or similar type of approved make. , water purifier and cooler 2 fitting and fixing water purifier for drinking purpose of capacity 6 litres / min, 5 purification system with reverse osmosis system with ultra ventilated membrane, tds500 to 2000 mgl / ppm, auto shut off with microswitch float manual flush facility, tds reduction 90% having automatic backwash system with filteration unit along with all accessories including plug top and electrical lead wire connection upto 3 metres from the purifier, water inlet and drain out connections complete in all respects similar to aquaguard or similar approved make ( model aquasure elegant ro water purifier of size width 360 mm x height 430 mm x depth 235 mm and weight 8.5 kg ) . , fire extinguisher 1 providing and fixing carbon di oxide type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. capacity 4.5 kg. , fire extinguisher 2 providing and fixing abc powder type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.capacity 6.0 kg. , electrical 1 wiring for light point / fan point / exhaust fan point / call bellpoint with 1.5 sq.mm frls pvc insulated copper conductorsingle core cable in surface / recessed steel conduit, withmodular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group c , electrical 2 wiring for twin control light point with 1.5 sq.mm frls pvcinsulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required. , electrical 3 wiring for group controlled ( looped ) light point / fan point / exhaust fan point / call bell point ( without independent switch etc. ) with 1.5 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, and earthing the point with 1.5 sq. mm frls pvc insulatedcopper conductor single core cable etc. as required. group c , pvc conduit 1 supplying and fixing of following sizes of medium class 20mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 2 supplying and fixing of following sizes of medium class 32mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 3 supplying and fixing of following sizes of medium class 50mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , electrical 4 wiring for light / power plug with 2x4 sq. mm frls pvcinsulated copper conductor single core cable in surface / recessed conduit alongwith 1 no. 4 sq. mm frls pvcinsulated copper conductor single core cable for loop earthingas required. , wiring frls pvc insulated copper conductor 1 2 x 2.5 sq. mm. + 1 x 2.5 sq. mm. earth wire , wiring frls pvc insulated copper conductor 2 2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire , wiring frls pvc insulated copper conductor 3 4 x 6 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 4 4 x 10 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 5 4 x 16 sq. mm + 2 x 16 sq. mm earth wire , s / f, gi box along with modular base & cover plate 1 or 2 module ( 75mm x 75mm ) , s / f, gi box along with modular base & cover plate 1 3 module ( 100mm x 75mm ) , s / f, gi box along with modular base & cover plate 2 4 module ( 125mmx75mm ) , s / f, gi box along with modular base & cover plate 3 6 module ( 200mm x 75mm ) , s / f, gi box along with modular base & cover plate 4 12 module ( 200mmx150mm ) , s / f modular switch / socket on the existing modular plate 5 / 6 amps switch , s / f modular switch / socket on the existing modular plate 2 15 / 16 amp switch , s / f modular switch / socket on the existing modular plate 3 3 pin 5 / 6 amp socket outlet , s / f modular switch / socket on the existing modular plate 4 6 pin 15 / 16 amp socket outlet , s / f modular switch / socket on the existing modular plate 5 telephone socket outlet , s / f modular switch / socket on the existing modular plate 6 tv antenna socket outlet , s / f modular switch / socket on the existing modular plate 7 bell push , electrical 5 supplying & fixing suitable size gi box wih modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, “c” curve including connections, painting etc. as required. ( for ac / geyser ) , electrical 6 supplying and drawing co axial tv cable rg 6 grade, 0.7 mm solid copper conductor pe insulated, shielded with fine tinned copper braid and protected with pvc sheath in the existing surface / recessed steel / pvc conduit as required. , electrical 7 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. , electrical 8 providing and fixing m.s. fan clamp type i or ii of 16 mm dia m.s. bar, bent to shape with hooked ends in r.c.c. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as required. , electrical 10 supplying and fixing 20 a, 240 v, spn industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 a c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. , electrical 11 supplying and fixing 20 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 12 supplying and fixing 30 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 13 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 8 way , double door , electrical 14 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 12 way , double door , electrical 15 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 16 way, double door , electrical 16 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 6 way ( 4 + 18 ) , double door , electrical 17 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 8 way ( 4 + 24 ) , double door , electrical 18 supplying and fixing of following ways surface / recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs ( but without mcbs and incomer ) as required . ( note : vertical type mcb tpdb is normally usedwhere 3 phase outlets are required. ) 4 way ( 4 + 12 ) , double door , 40 a, rccb supplying and fixing following rating, double pole, ( single phase and neutral ) , 240 v, residual current circuit breaker ( rccb ) , having a sensitivity current 30 ma in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a mcb supplying and fixing 40 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 40 tp mcb , single pole mcb supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 63a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 100a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , l / f pvc sheathed / xlpe power cable in trench laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 95 sq. mm and upto 185 sq. mm , l / f pvc sheathed / xlpe power cable in trench 1 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm , l / f pvc sheathed / xlpe power cable over cable tray upto 35 sq. mm ( clamped with 1mm thick saddle ) , l / f pvc sheathed / xlpe power cable over cable tray 2 above 35 sq. mm and upto 95 sq. mm ( clamped with 25x3mm ms flat clamp ) , l / f pvc sheathed / xlpe power cable over cable tray 3 above 95 sq. mm and upto 185 sq. mm ( clamped with 25 / 40x3mm ms flat clamp ) , l / f pvc sheathed / xlpe power cable over cable tray 4 above 185 sq. mm and upto 400 sq. mm ( clamped with 40x3mm ms flat clamp ) , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3.5c x 300 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 1 3.5c x 240 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 2 3.5c x 120 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3 3.5c x 95 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 4 3.5c x 50 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 5 4c x 35 sqmm aluminium conductor cable a2xfy , cable tray supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 100 mm width x 50 mm depth x 1.6 mm thickness , cable tray 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 300 mm width x 50 mm depth x 1.6 mm thickness , cable tray 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 600 mm width x 62.5 mm depth x 2.0 mm thickness , cable tray “bends” supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.100 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.150 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.300 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 3 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.450 mm width x 50 mm depth x 2 mm thickness , cable tray “bends” 4 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.600 mm width x 62.5 mm depth x 2.0 mm thickness , mv cable supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 300 sqmm, aluminium conductor cable a2xfy , mv cable 1 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 240 sqmm, aluminium conductor cable a2xfy , mv cable 2 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 120 sqmm, aluminium conductor cable a2xfy , mv cable 3 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 95 sqmm, aluminium conductor cable a2xfy , earthing earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required. , earthing 1 earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. , earthing 2 earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. , earthing 3 providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required. , earthing 4 providing and fixing 25 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required. , earthing 5 providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required. , earthing 6 providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for connections etc. as required. , fiting & fixtures 1 supply and installation of regular / standard model a.c. ceiling fan of 1400 mm sweep including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq. mm fr pvc insulated copper conductor etc as required. , fiting & fixtures 2 supplying and fixing single wall mounted 18 / 22 watt led type batten fitting complete with electronic driver and led tube etc directly on wall / ceiling includingconnections with 1.5 sq.mm fr pvc insulated copper conductor and earthing the body etc. as required. , fiting & fixtures 3 supply installation and comissioning ofintegrated batten made ( 2ft ) of ultra slim co extruded polycarbonate channel with housing part in white finish & diffuser part in reeded opal finish.white finish abs end caps with decorative circular coloured polycarbonate cap snap fitted on the end cap to enhance the aesthetic of the fixture. these end caps are snap fitted to the fixture.high efficiency long life led with lumen efficacy of 130 lm / w with viewing angle of 120º.powered by an integral isolated low thd electronic led driver ( smps based constant current supply ) with output short circuit protection, surge protection.can be fixed directly into the wall / ceiling by means of mounting ss clips provided with the fixture. ip 20, lumen output of 950 lumens with system efficacy of > 105lm / w .cri >80, color temperature 6500k, thd <20% and pf>0.95, ip20 . life class of 35, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz;internal surge protection:3 kv; protection including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. : reverse polarity, open & short circuit. driver safety requirement standards :is 15885 2 13, test report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source. cat ref havells :lumilinebs9wled840spcwh or approved equivalent. , fiting & fixtures 4 supplying and fixing recess mounted 12 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 5 supplying and fixing recess mounted 18 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 6 supply, installation, testing and commissioning of 400 mm sweep, 65w, blade material aluminium blades , speed & oscillation 3 speed, pull cord for speed and oscillation.air delivery minimum 72 m³ / min, speed minimun 1350 revolution per minute.suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. , fiting & fixtures 7 supply installation and comissioning of 28w 2x2 panel recess mounting luminaire with high performance leds, suitable for mounting with armstrong / grid ceiling.crca powder coated white after phosphochromate treatment.high efficiency long life led package in integral module with lumen efficacy of >100 lm / w and viewing angle of 120° to ensure better uniformity.powered by an independent isolated, selv output electronic led driver ( smps based constant current supply ) with output short circuit protection, surge protection & other reliability test. lumen output of 3450 lumens.cri >80, color temperature 5700k, thd <10% and pf >0.95, ip20, ik03.life class of 50, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz;internal surge protection:3 kv; protection including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. : reverse polarity, open & short circuit. driver safety requirement standards :is 15885 2 13, test report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source.cat ref havells :venusneohe2x2plr128wled857 or approved equivalent. , fiting & fixtures 8 supplying installation testing & commissioning ofb22 based 9w led 3 star bulb with 850 lumen, 6k color temperature including holder. , fiting & fixtures 9 supplying installation testing & commissioning of black painted extruded aluminium housing. green / red led’s mounted inside the housing. laser engraved signage matter on single / double acrylic sheet fixed on one side suitable for wall / ceiling / suspension type single / double sided display. in double sided version black paper is inserted. ni cd battery back up to 2 hrs. ( charged up to 8 10 hrs ) .mounting strings provided for pendent mounting operating voltage 150 280v ac ambient operating temperature. – 0 to 450c ingress protection – ip42.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. 220208 besl 03 led ssd wbb green 240 3 8wor220209 besl 03 led ssd wbb red 240 3 8wor220210 besl 03 led dsd wbb green 240 3 8wor220211 besl 03 led dsd wbb red 240 3 8w , fiting & fixtures 10 supply, installation, testing & erecting of ip66 bulkhead surface type lighting fixture 10w made up of pressure die cast aluminium housing and polyster powder coated die cast aluminium with high quality polycarbonate diffuser in opal finish for glare free light distribution.high efficiency long life led module with smd led package mounted on mcpcb with lumen efficacy of >95 lm / w with system lumen 950. powered by integral electronic led driver with apfc with low thd output short / open circuit protection. cct 5700, cri>80, system efficacy>90lm / w, thd<15%, pf>.95, ip66, ik 10, life class of 50, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. cat ref: havells : hexaft10wled857ssymbopc or approved equivalent. , civil & misc works1 providing and fixing m.v. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works2 providing and fixing h.t. danger notice plate of 250 mm x 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works3 supplying and making cable route marker with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm x 60 cm at the bottom and 50 cm x 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. , civil & misc works4 supplying and fixing cable route marker with 10 cm x 10 cm x 5 mm thick g.i. plate with inscription there on, bolted / welded to 35 mm x 35 mm x 6 mm angle iron, 60 cm long and fixing the same in ground as required. , civil & misc works5 providing & fixing in position 1000 mm wide , electrical insulating rubber mats as per is 15652:2006, 2 mm thick, suitable up to 1.1 kv , fire retardant, no effect of acids, alkalis and transformer oils, moisture proof, high tensile strengthandtexture finish / cloth impression ( anti slip , marking on top ) , civil & misc works6 supply & fixing shock treatment chart duly mounted on a wooden frame with 5 mm thick glass as required ( approx front area 1.20 sq metre ) , 40 kvaups supplying, installation, testing and commissioningof online double conversion fully microprocessor based , indoor type, compact ups system of following rating with igbt based pwm technology to achieve thd < 3% and input power factor of greater than 0.95 at 50% loading, suitable for three phase ac input voltage 380 v to 440 v, 50 hz +3% / 3 % and three phase ac output voltage 415 ± 1% volts & frequency 50 ± 0.5 hz , inbuilt isolation transformer, necessary vrla batteries of suitable size having 30 minutes back up time , mounting rack including and suitable size connecting cable ( for ups to battery and battery to battery ) , static and maintenance bypass switch, snmp card for rs232 / ethernet ip computability for operation and monitoring etc. with all components as mentioned , specifications, complete as required.note : concerning vendor needs to furnish the battery sizing calculations at the time of ga approval and battery size has to be as per the approved ga drawing. , external lighting 1 supply and erection of 4 metre height hot dipgalvanized octagonal street light pole with followingarm with top dia 70 mm and bottom dia a / f 130 mm, made of 3 mm thick sheet along with base plate of size220 x 220 x 12 mm , small door opening for junctionbox mounting with mcb & connector, cement concreteof 1:3:6 including excavation, refilling and suitable sizefoundation bolts with template and all complete jobasrequired. ( but without pole collar ) single arm , external lighting 2 supplying and fixing 40 / 45 watt led type street lightwith die cast aluminium housing for ingress protectionof ip65 and complete with all accessories etc, onpole / building including connection with fr pvcinsulated copper conductor cable and earthing thebody etc. as required. , ip based cctv system 1 sitc of 2 megapixel @ 25fps, h.265 ip bullet camera, 1 / 2.9 cmos with 2.8~12mm varifocal lens, 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 2 sitc of 2 megapixel @ 25fps, h.265 ip dome camera, 1 / 2.9 cmos with 3.6 fixed mm 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 3 sitc of 2 megapixel @ 25fps, ptz camera h.265 ip dome camera, 1 / 2.9 cmos with 2.6 fixed lenslux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 4 sitc of 32ch 4k ivr , h.265 / h.264 • 1080p real time • 4k display • dual lan • 8x hdd • raid •web plugin free h.265 / h.264 compression technology 4k display for clear monitoring up to 1080p 16ch decoding ability smart search ii smart vca event searchsupport raid 0, 1, 5 supported to prevent from recording data loss browsers supported: ie , smart functions : target count, electric fence, face detection, humaniod detection, retrograde detection, leave position detectio output, local & network backup etc. complete as required. , cctv 5 sitc of harddiskdrive8tb, 24 / 7surveillance category only complete etc as required.etc.all complete , cctv 6 sitc of 55 led narrow bazel for monitoring for nvr server etc. all complete. , cctv 7 sitc of rj 45 outlets near the cameras etc. all complete. etc. all complete. , cctv 8 sitc of cat 6 patch cords 1 meter high quality four pair twisted stranded cable terminated with rj45 modular plugs at both the ends. , signage 1 providing & fixing of building direction signage mounted on pole, with pole of 100x100mm shs ( square hollow section ) of height of 5600mm, and sign size of 900x1050, sign made of aluminiu c section of 60mm with internal framing to support the frame in ms tubes hollow section, frame work duly painted with anti rust coatings, with facia of 3mm thick exterior grade aluminium composite panel, cladded with uv cured digital printed retroreflective sheet of 3m make, and back panel of 3mm exterior grade acp, all pipes to be painted in approved color. cost shall includecost towards installation, including excuvation and filling up with specified pcc and fixing of foundation bolts as specified, also it shall include the designing charges.all complete as per direction by engineer in charge. , signage 4 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge , wall projected 250x210mm, both sides , signage 5 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge, door mounted, 300x80mm , 2 tr air conditioning 1 split ac ( inverter model ) : supply, installation, testing, commissioning of split type wall mounted air conditioning units of following capacity including inddor, outdoor unit fitted with inverter based rotary compressor fitted with rotary compressor, copper condensor and first charge refrigent r410a / eco friendly green gas only, all complete including all electrical connections to the electrical power supply system of the building, includingbut not limited to supply of all electrical plugs, etc., as necessary, lengthening of all electrical wires of ac units ( both indoor and outdoor ) , drain pipe andincluding suitable voltage stabilisers, etc. so as to place them in a concealed manner in the desired position. the copper pipes and electrical cables shall be concealed in approved manner and neatly run in straight lines in a workman like manner with proper supports. complete supply and installation of split2 tr star rating 3 star , refrigerant piping copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 25 mm od, wall thickness >= 1.2 mm ( insulation 19 mm thick ) , refrigerant piping 1 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 19.1 mm od, wall thickness >= 1.0 mm ( insulation 13 mm thick ) , refrigerant piping 2 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 15.9 mm od, wall thickness >= 0.8 mm ( insulation 13 mm thick ) , refrigerant piping 3 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 9.5 mm od, wall thickness >= 0.8 mm ( insulation 13 mm thick ) , drain piping providing and fixing of cpvc 6 kg / cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 20 mm , drain piping 1 providing and fixing of cpvc 6 kg / cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 32 mm , main oxygen manifold supply, installation, testing and commissioning of following gas manifold system ( excluding cylinders ) . the manifold is configured for designed numbers of cylinders and is suitable to withstand a pressure of 145 kg / cm2, along withhigh pressure copper annealed tail pipes with end brass adapter suitable for cylinders and manifold. top frame comprising of high pressure copper pipes of size 1 / 2” nb x 15swg with high pressure brass fittings made of high tensile brass and connections through nonreturn valves, the design of middle and bottomframes is provided to fit both round and flat bottom cylinders safely. the manifold is tested ( hydraulically ) at 3500 psig. ( it should be ce and iso 13485 certified ) mani fold oxygen manifold 6 + 6 cylinder banks complete with nrv, middle frame, bottom frame with ce marked, , emergency manifold emergency oxygen manifold 01 + 01 cylinder emergency manifold with complete regulator, nrv, middle frame & bottom frame, , control panelfor oxygen fully automatic three port control panel for oxygen supply, installation, testing and commissioning of automatic manifold control panel would provide a duty or standby gas supply from two cylinder banks with automaticchangeover the manifold indicates local status and has a remote indicator facility. automaticmanifold control panel would be designed to supply the mgps with a constant pressure supply via a control panel form two equal banks of cylinders and the changeover from the ‘duty’ to the ‘standby’ bank of cylinders would beautomatic. automatic changeover from the duty to the standby bank would occur at a cylinder pressure that will ensure the maximum usage of the contents of the duty bank. the changeover unit would be provided with monitoring todetect and display: duty bank operating, duty bank empty, standby bank operating, and standby bank below 10 % when the duty bank is empty, reserve bank low, pipeline pressure fault. there would be facility to connect liquidoxygen supply ( i.e. three port control panel ) ( it should be ce and iso 13485 certified ) fully automatic three port control panel for oxygen , emergency manifold line regulator emergency manifold line regulator supply, installation, testing and commissioning of emergency manifold line regulator i n p u t p r e s s u r e 1 5 0 k g / c m 2 working pressure 4 kg / cm2 it should be ce and iso 13485 certified.oxygen input pressure 150 kg / cm2 working pressure 4 kg / cm2capacity : 1500 lpm , cylinderconnectingpipe ( pig tail ) supply, installation, testing and commissioning of cylinder connecting pipe ( pig tail ) made up of flexible ss hose with safety cord 5 / 8 inch bsp gland nut and one side 1 / 2 inch bsp internal threads having one meter length. ( oxygen 24 , n2o 10, co2 4 ) , backpressurecompensated [ bpc ] oxygen flowmeter supply, installation, testing and commissioning of back pressure compensated [ bpc ] oxygen flow meter body should be made of brass material dully chrome plated and graduated from 0 15 l / m on an expanded lower scale forprecision setting at low flow and 5 15 l / m for general use. the humidifier bottle should be made up of unbreakable polycarbonate / polysulphone material and autoclavable at 121 degree centigrade temperature. it should be ceand iso 13485 certified. , oxygen gas outletfront loadeddin / bsstd gas outlet front loaded din / bs std:supply, installation, testing and commissioning of din / british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din / british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din / bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , medical air ( 4 bar ) outletfront loadeddin / bsstd gas outlet front loaded din / bs std:supply, installation, testing and commissioning of din / british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din / british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din / bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , quickconnectadapter din / british standard quick connect oxygen adapter ( safety probe ) , tube oxygen h.p. rubber tube white color, , alarm supply, installation, testing and commissioningof area pressure alarm panel would be witdigital display, closed circuit, self monitoringtype. the alarm would be designed to monitorthe line pressure in piping systems.it should be ce and iso 13485 certified. withfour digit notified no. area line pressure alarm 1 gases , isolation valve, supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified.42mm , isolation valve 2 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 28mm , isolation valve 3 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 22mm , isolation valve 4 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 15mm , isolation valve 5 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 12mm , pipeline 1 medical grade copper pipeline ( in mtrs. ) as per en 13348, 12 mm ( od ) x 0.7 mm thickness , pipeline 2 medical grade copper pipeline ( in mtrs. ) as per en 13348, 15 mm ( od ) x 0.9 mm thickness , pipeline 3 medical grade copper pipeline ( in mtrs. ) as per en 13348, 22 mm ( od ) x 0.9 mm thickness , pipeline 4 medical grade copper pipeline ( in mtrs. ) as per en 13348, 28 mm ( od ) x 0.9 mm thickness , pipeline 5 medical grade copper pipeline ( in mtrs. ) as per en 13348, 42 mm ( od ) x 1.2 mm thickness , hospital sheet patient bedtype iii with mattress overall sizes: ( l ) 2268 mm x ( w ) 922 mm x ( h ) 610 mmdescription: sheet bed should be a plain bed used in the recovery ward.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board / leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral whiteperformance specifications: maximum patient load should be 135 kgthickness mattress: 3+sandwitchconstruction: round corners yeshitlon thickness ( mm ) : 60hitlondensity ( gm / dcm3 ) : 23coir ( both side ) thicknessmm: 20density ( gm / dcm3 ) : 70, drc ( % ) : 22quilting combination / layers:pilled foam – quilting ( one side ) thicknessmm 14pilled foam density gm / dcm3 18pu foam / epe sheet side walling thicknessmm 3total mattress thickness mm 87rexine ( gsm ) : 150note: * finish product thickness should be measure from outer to outer surface. tolerance +5 mm , paediatric bed with mattress paediatric bed of overall sizes in mm: 1500 ( l ) x 850 ( w ) x 1210 ( h ) flat single section bed with grille frame on 4 sides.suitable for children up to 12 years.drop down grill frame on both sides for protection of the patient.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board / leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral white , bed side locker type i over all dimension :402mmlx422mm wx840mm ht .locker should have one cabinet and one drawer unit .both provided with cam lock .there should be gap between drawer and unit to keep general items for frequesnt use castors are provided for easy handling .drawer made up of crca sheet 1 mm thick and has ball slide for easy operation .top ss 304 sheet 0.8 mm thick castors 50 mmdia , hamdle abs ..powder coating of epoxy polyester , medicinetrolleytype i overall size902mm ( l ) x532mm ( w ) x915mm ( h ) .top shelf should be made of ss 304 sheetof 1 mm thick. supporting legs made of ss304 tubesection 30.30 mm dia.of 1.2 mm thick provided to suppoort the entire structure.ss 304 tube provided at the bottom for placement of instument being used .handle made up of ss 304 tubeof dia dia 16 mmand thickness 1.2 mm provided to handle trolley .and maneuver accordingly. high endurance anti static plastic injection moulded castors of 125 mm dia.ss should be finished in glossy mirror finish. max load capacity of 10 kg / shelf udl , round stooltype i overall sizes diagonal legdia 538 mmh470 min 655max.ss 202 made sheet with spin section of thickness 1mm & should be non corrosive. it should have a diameter of 305mm, seat base is made of ms ring and rectangular tube.en8 screw having dia of 22 mm should be used for height adjustment of the seat base.the hub should be made of ms erw tube having dia of 38mm and thickness 2 mm.the hub should be welded with the legs and it should accommodate and cover the lead screw mechanism.the understructure should consist of 4 legs made up ofms erw tube of diameter 25.4 mm and 1.6mm thick. the press formed pipe leg should give a round & clean look. all the legs should be provided with 4 nos of nylon 6 bush.all metal componentsshould be pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbialepoxy polyster powder coating . all welding should be co2 argon welding to minimise rusting on the welding areas.safe working load must be 135kg , strecher on trolley type i 2005mm ( l ) x666mm ( w ) x827mm ( h ) .the trolley should be made of 31.75 and 25.4 mm dia 1.6 mm thick erw tube.holder for stretcher should be made up of mild steel.castor should be of 200 mm dia , diagonal locking castor.stretcher should be made up oferw tubeof dia 25.4 mm and thickness 1.6 mm.top sheet should be made of crca sheetof thickness 1.2 mm with contour shape to accommodate patient.iv pole holder should be made ofms .maximum safe work load should be 135 kg.to ensure qood quality welding co2 argonprocess should be adhered to.all metal componentsshould be pre treated with zinc phosphating in 9 tank porcess and then powder coated with anti microbialepoxy polyster powder coating.goods should be supplied in knocked down construction to reduce carbon emission. performance test :proof loading test , cycle tests , impact test, salt spray test, castor break test, the manufacturer should compilant with iso 9001, 14001, 13485, ohsas 1800 and ce certification. , doctor desk type x s / f / f executive table main desk should be of dimesion : 1350w x 750d x 750h.the table top should bein white cedar, side panelsin black, while the modestypanel ina combination of black & white cedar. side panels : ( black ) made form 18mm thick plt with pvc lipping.modesty panel : made form 18mm thick plt with pvc lipping. bigger upper panel in black and smaller lower panel in white cedar. made from 18mm thick plt with pvc lipping. mobile pedestal : one box and one filing drawer with 18mm thick plb fronts and top. handles : black powder coated die cast aluminum alloy handles. mobile pedestal and hdu are fitted with central lock. , chair type iii s / f / f executive chair1 ) seat / back assembly: the seat and back are made up of 1.2 cm. thick hot pressed plywood, upholstered withfabric upholstery covers and moulded polyurethane foam. the back foam is designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area.high back size : 47.5 cm ( w ) x 69.5 cm ( h ) seat size : 47.0 cm. ( w ) x 48.0 cm. ( d ) 2 ) polyurethane foam: the polyurethane foam is moulded with density = 45 + / 2 kg / m 3and hardness = 20 + / 2at 25% compression. 3 ) armrests: the one piece armrests are injection moulded from black co polymer polypropylene. 4 ) center tilt synchro mechanism : the mechanism is designed with the following features:• 360 revolving type. • upright position locking. • tilt tension adjustment.• seat / back tilting ratio of 1:3 ( 60 seat tilt / 180 back tilt ) . 5 ) pneumatic height adjustment : the pneumatic height adjustment has anadjustment stroke of 12.0 cm. 6 ) telescopic bellow assembly : the bellow is 3 piece telescopic type and injection moulded in black polypropylene. 7 ) pedestal assembly : . , staff / visitor chair type i chair of over all size: 58.0cm ( w ) x 56.5cm ( d ) x 87.5cm ( h ) & 48.0cm ( sh ) seat / back assembly: the seat and back are made from chemically treated and seasoned wood, upholstered with plywood, black leather cloth, and u foam.*back size: 46.0cm ( w ) x 27.0cm ( h ) .*seat size: 46.0cm ( w ) x 40.0cm ( d ) .armrest tube: the armrest tube is made of m.s. e.r.w. tube dia. 2.54cm. ( 1” ) x 16bg thick and powder coated.armrest: the armrest is gas assisted injection moulded from black polypropylene.understructure assembly: the understructure assembly is a cantilever type frame made of dia. 2.54cm. ( 1” ) x 14bg. thick m.s. e.r.w. tube and powder coated. , wheel chair type i ( l ) 790 x ( w ) 600 x ( h ) 870mm.foldable frame structure should be made of section 22diax1.2mm a3 carbon steel with chrome finish. cross bar should be made of a3 carbon steel with section 25.4 x 1.2mm.rear wheel:24 inch solid mag wheels with alloy in the rim .integrated handrim provide to drive the wheel chair of section 16x1.2mm a3 carbon steel with chrome finish.front wheel :8 inch hub made of pa polymer and outer with solid rubber.pu molded arm rest & base should be made of abs for better arm support .leatherite strap for calf rest & leatherite cushion for seat.adjustable alluminimum die cast foot rest with updown & swivel type mechanism.handles should be made of moulded rubber grip to push the wheelchair.hand brakes should be provided to lock the wheelchair at desired location.foot pressextended base with molded plastic for better grip.anti rust chrome finsh. safe work load of100 kg , basin stand type i ht 850 mm ss bowl ms tubular frame of dia 25.4 x1.2 mm tube work mounted on three 50 dia.non rusting castors all without brack. ss part finished with matt polish , kick buckettype i overa all dimension of the bucket should be 517 mm ( l ) x 517 mm ( w ) x 210 mm h.it should made of 12.7 mm dia and 1.6 mm thick ss 304 ring. the bowl should be ss made of .8 mm thck .3 nos 50 mm diahigh endurance plasticinjection moulded castors should be provided for the movement.mx load bearing capacity should be 10 kg. , hospital curtain tracks & i.v. tree system supply installation testing & commissioning of cubical tracks system made of powder coated aluminium alloy, stain free polyster fabric , water repellent curtains , smooth movement , non sticking runnner with stainless steel hooks made from mirror finish stainless steel , adjustable height with all accessories. total quantity : 1...
30456419 bids are invited for pile boring, providing and installation bored cast in situ reinforced cement concrete piles of grade m 25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using direct mud circulation ( dmc ) or bailer and chisel technique by tripod and mechanical winch machine all complete, including removal of excavated earth with all its lifts and leads ( length of pile for payment shall be measured up to bottom of pile cap ) .450mm dia piles ( inclusive of carriage ) , pcc providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering all work up to plinthlevel : 1:3:6 ( 1 cement : 3 coarse sand ( zone iii ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources ) ( inclusive of carriage ) , rcc providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland / portland slag cement, admixtures in recommended proportion as per is: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer in charge; for the following grades of concrete. note: extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re design the mix or bear the cost of extra cement. ( inclusive of carriage ) , brick work brick work with bricks of class designation 100a in foundations and plinthin :cement mortar 1:4 ( 1 cement : 4 coarse sand ) ( inclusive of carriage ) , sand filing supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. ( inclusive of carriage ) with lead upto 3 km , shuttering centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete , steel steel reinforcement for r.c.c. work ready to use cut and bend rebars of approved make from factory / workshop to construction site including placing in position and binding all complete thermo mechanically treated bars of grade fe 500d or more. , plinth protection making plinth protection 50mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand ( zone iii ) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources ) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. , door & window providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber / neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. ( glazing, paneling and dash fasteners to be paid for separately ) :powder coated aluminium ( minimum thickness of powder coating 50 micron ) , glass providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . ( cost of aluminium snap beading shall be paid in basic item ) :with float glass panes of 5 mm thickness ( weight not less than 12.50 kg / sqm ) , upvc door providing and fixing of factory made upvc white colour casement door, upvc multichambered extruted frame, sash and mullion profile. frame duly reinforced with 1.2mm gi section box tpe chamber and sash with 1.5mm thick gi section ( ± 0.2mm ) based on wind load calculations ( shape and size according to upvc profiles ) , appropiate dimentions of upvc extruded glazing bead, epdm gasket ( k / o type ) , seperate drainage system, ss34 grade friction hinges 2d / 3d plate hinges, zinc alloy ( white powder coated ) casement handle, gi fastener 8x100 mm size for fixing frame to finish wall, plastic packer and caps and necessary steel screws etc.profile of frame and sash shall be metered cut and fusion welded at all corners, mullion shall be also fusion welded / joined mechanically including drilling of holes for fixing hardware and drainage of water etc. after fixing of frames , gap between frame and adjascent wall shall be filled with pu foaam / backer rod required size and the approved quantity. after that sealed with weather proof silicon sealant at both side, all complete as per approved drawing and direction of eic , door closer providing and fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm ) , with necessary accessories and screws etc. complete. , door providing and fixing isi marked flush door shutters conforming to is : 2202 ( part i ) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including stainless steel butt hinges wirhnecessary screws , door stopper providing and fixing aluminium hanging floor door stopper, isi marked, anodised ( anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour and shade, with necessary screws etc. complete. single rubber stopper , solling providing designation 100 a one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as perbuilding specification and direction of e / l, , tile 1 providing and laying vitrified floor tiles in different sizes ( thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm , tile 2 providing and laying ceramic glazed floor tiles of size 300x300 mm ( thickness to be specified by the manufacturer ) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) , jointing with grey cement slurry @ 3.3 kg / sqm including pointing the joints with white cement and matching pigment etc., complete. , tile 3 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 ( thickness to be specified by the manufacturer ) , of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. , granite providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm ( average ) thick base of cement mortar 1:4 ( 1 cement : 4 coarse sand ) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge :flamed finish granite stone slab jet black, cherry red, elitebrown, cat eye or equivalent. , false ceiling providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance ( rh ) of 99%, light reflectance ? 85%, thermal conductivity k = 0.052 0.057 w / m k, fire performance as per ( bs 476 pt 6 &7 ) in true horizontal level suspended on interlocking t grid of hot dipped all round galvanized iron section of 0.33 mm thick ( galvanized @120 gsm ) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item ( galvanised@80gsm ) 50 mm long 8mmouter diameter m 6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and l shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘t’ , pre fabsteel designing, providing, installing and fixing factory finished custom designed cold form light gauge steel framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. the steel sheet shall be galvanized ( az 150gms aluminium zinc alloy coated steel having minimum yield strength 300 550 mpa ) conforming to aisi specifications and ibc 2009 for cold formed steel framing and construction and also as per is: 875 1987, iso 800 1984 and is:801 1975. the wind load shall be as per provisions of is 875 ( part iii ) . lgsfs frame shall be designed as per is: 801 using commercially available software such as frame cad pro 11.7 / staad pro v8i / architekv2.5.16 / revit architecture 2011 or equivalent. proper usage of connection accessories like heavy duty tension ties, light duty hold ons, twist straps ( to connect truss with wall frames ) , strong tie, tie rod, h brackets, boxing sections, l shaped angles for better structural stability. the framing section shall be cold form c type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple / slot at required locations as per approved drawings. , pre fabwall providing and fixing of external wall system on light gauge steel frame work with outer face cement boards as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make. a groove of 2 mm to 3mm shall be maintained and grooves shall be sealed with silicon based sealant. the board shall be fixed in a staggered pattern. screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm and. internal face 12.5 mm thick gypsum plaster board fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. ( cost of frame work to be paid for separately ) outer face: outer face having 6mm thick fiber cement board fixed on 9mm thick fiber cement board, type a, as per is:14862:2000 ( high pressure steam cured ) inner face : 12.5 mm thick gypsum plaster board conforming to is 2095:2011 fixed on 8 mm thick fibre cement board confirming to is:14862:2000 of type b ( high pressure steam cured ) , pre fabin. wall providing and fixing internal wall panels on light gauge steel frame work with 12.5mm thick gypsum plaster board conforming is 2095:2011 fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c / c of approved make, screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. ( cost of frame work to be paid for separately , roof sheet supply & installation of precoated galvanised iron profile sheets ( size, shape and pitch of corrugation as approved by engineer in charge ) 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by engineer in charge. the sheet shall be fixed using self drilling / self tapping screws of size ( 5.5x 55mm ) with epdm seal or with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. , ridge plain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : ridges plain ( 500 600mm ) . , gutter drain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + / 5% total coated thickness ( tct ) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : gutter , flashing providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 5% total coated thickness ( tct ) , zinc coating 120gsm as per is: 277 in 240mpasteel grade, 5 7 microns epoxy primer on both side of the sheet and polyester topcoat 15 18 microns using self drilling / self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumenwashers complete :flashings / aprons. ( upto 600 mm ) , under deck insulation providing and fixing thermal insulation of ceiling ( under deck insulation ) with resin bonded rockwool conforming to is: 8183, density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to ceiling with metallic cleats ( 50x50x3 mm ) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. , resin bonded rock wool providing and fixing thermal insulation with resin bonded rock wool conforming to is: 8183, having density 48 kg / m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to wall with screw, rawel plug & washers and held and in position by criss cossing gi wire etc. complete as per directions of engineerin charge. , face panel providing and fixing in all exterior face panels breathable vapour barrier underneath the cementfiber board as per national building code 2009 complete as per direction of engineer in charge. , lap siding supplying and installation of moisture resistant / fire resistantlap siding 8 mm thick and width as per standard sizes made ofiber cement board with embossed decorative finish to give pleasing exterior fixed horizontally with staggered joints including minimum over lapof 32 mm external cement fibre boardconforming to is 14862:2000 offixed with self drilling / taping screws / fastners of approved make. , putty providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distemper distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1 new work ( two or more coats ) over and including water tinnable priming coat with cement primer , ex. paint finishing walls with textured exterior paint of required shade : new work ( two or more coats applied @ 3.28 ltr / 10 sqm ) over and including priming coat of exterior primer applied @ 2.20kg / 10 sqm sqm , oil paint painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work . , steel 1 steel work in built up tubular ( round, square or rectangular hollow tubes etc. ) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. hot finished welded type tubes , excavation earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan ) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. , road providing and laying c.c. pavement of mix m 25 with ready mixed concrete from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc.complete as per specifications and directions of engineer in charge. ( the panel shuttering work shall be paid for separately ) . ( note: cement content considered in this item is @ 330 kg / cum. excess / less cement used as per design mix is payable / recoverableseparately ) . , paver block providing and laying 60 mm thick factory made cement concrete interlocking paver block of m 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thickcompacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer in charge. , phe 1 providing & fixing stone slab table rubbed, edges rounded and polished of size 75 x 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste 6mm nominal size ) as per engineer in charge and finished smooth white agaria marble stone , phe 2 providing and fixing salem stainless steel a isi 304 ( 18 / 8 ) kitchen sink as per is: 13983 with ci brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. kitchen sink with drain board510x1040mm bowl depth 200mm. , phe 4 providing and fixing mirror of superior glass ( of approved quality ) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing:rectangular shape 453x357 mm , phe 5 providing and fixing toilet paper holder:c.p. brass , phe 6 providing and fixing water closet squatting pan ( indian type w.c.pan ) with 100 mm sand cast iron p or s trap, 10 litre low fixturescomplete, including cutting and making good the walls andlevel whitep.v.c. flushing cistern, including flush pipe, with manually controlleddevice ( handle lever ) conforming to is : 7231, with all fittings andfloors wherever required :white vitreous china orissa pattern w.c. pan of size580x440 mm with integral type foot rests , phe 7 providing and fixing white vitreous china pedestal type water closet ( european type w.c. pan ) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device ( handle lever ) , conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : w.c. pan with isi marked white solid plastic seat and lid , phe 8 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer in charge , phe 9 providing and fixing cp brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge.. ( sink & urinal ) , phe 10 providing & fixingptmt towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealedfittings arrangement of approved quality and colour weighing not less than 88 gms , phe 11 providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms.15mm nominal bore , phe 12 providing and fixing c.p. brass bib cock of approved quality confirming to is:893115mm nominal bore , phe 13 providing and fixing c.p.brass angle valve for basin mixer and geyser points of approved quality conforming to is 8931 a ) 15 mm nominal bore.15 mm nominal bore , phe 14 providing and fixing wash bashin with c.i. brackets, 15mm dia cp brass singal hole basin mixer of approved quility and make, including painting of fittings and brackets, cutting and making good the walls wherever required white vitreous china surgeon type wash basin of size 660x460 mm with a pair of 15 mm c.p. brass pillar taps with elbow operated levers , phe 15 providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption ) , having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of engineer in charge.. , phe 16 providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. , phe 17 providing and fixing white vitreous china laboratory sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p brass waste and 40mm c.p. brass trap with necessary c.p. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :size 600x450x200 mm , phe 18 providing and fixing cp brass single lever telephonic wall mixer of quality & make as approved by engineer in charge . a ) 15 mm nominal dia. , phe 19 providing and fixing cp brass shower rose with 15 or 20 mm inlet100 mm diameter , phe 20 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. , phe 21 providing and fixing ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. , phe 22 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. ( internal work ) 40 mm dia, nominal bore , phe 23 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. ( internal work ) 50 mm dia, nominal bore , phe 24 two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand andmanufacturetwo more coast on new work , phe 25 p / f m.s. cap 100 mm dia , phe 26 providing and fixing, upvcpipes 6 kg / cm2 ( is: 4985 ) including all fittings ( plain or door ) e.g. bends, junction, offsets, access pieces, jointing with rubber ring / solvent cement joints includingrequired suports, cutting chase or holes in walls and floors and making good where required.75 mm dia pipe , phe 27 providing and fixing, upvcpipes 6 kg / cm2 ( is: 4985 ) including all fittings ( plain or door ) e.g. bends, junction, offsets, access pieces, jointing with rubber ring / solvent cement joints includingrequired suports, cutting chase or holes in walls and floors and making good where required.110 mm dia pipe , phe 28 providing & fixing on wall face unplasticised rigid pvc rain water pipes conforming to is:13592 tyape a included jointing with seal ring conforning to is:5382 leaving 10 mm gap for thermal expansion. ( i ) single socketed pipes.110 mm diameter , phe 29 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. coupler 110 mm diameter , phe 30 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. bend 87.5 deg 110 mm diameter , phe 31 providing, fixing on wall face unplasticised pvc moulded fittings / accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. shoe 110mm shoe , phe 32 providing & fixing unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50mm hard wood plugs, screwed with .m.s. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1cement : 4 coarse sand ) and making good the wall etc. complete.110 mm dia , phe 33 providing and fixing cpvc pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 20 mm nominal outer dia pipes , phe 34 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 25mm dia, nominal bore , phe 35 providing and fixing of gun metal gate valve with ci wheel of approved quality ( screwed ends ) 32 mm dia, nominal bore , phe 36 providing and fixing gun metal non return valve of approved quality ( pn 1.6 ) 40 nominal bore , phe 37 providing and fixing brass stop cock of approved quality15mm nominal bore , ex. phe 6 providing 250mm wide brick drain in cement mortar ( 1:6 ) with av. 150mm.clear depth and 250mm apron including cost of e / w. involved with 75mmcement concrete ( 1:4:8 ) over one brick designation 100 a flat soling inproper grade and slope at the base.the drain duly.plastered in cm. ( 1:3 ) with punning over exposed surface all complete as per buildingspecification and direction of e / l, , ex. phe 7 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil ( hard or soft ) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [ hard / dense soil ] pipes, cables etc.exceeding 80mm dia.but not exceeding 300mm dia. , ex. phe 8 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil ( hard or soft ) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [ hard / dense soil ] pipes, cables etc.exceeding 80mm dia. exceeding 300mm dia. , ex. phe 9 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 250 mm dia rcc pipe , ex. phe 10 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 300 mm dia rcc pipe , ex. phe 11 providing and laying non pressure np2 class ( light duty ) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand ) including testing of joints etc. complete. ( for storm drainage ) 450 mm dia rcc pipe , ex. phe 12 inside size 120x90 cm and 90 cm deep including c.i. cover with frame ( medium duty ) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg ( weight of cover 58 kg and weight of frame 58 kg ) :with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , ex. phe 13 providing and fixing square mouth sw gully trap grade ‘a’ complete ci grating brick masonry chamber with bricks of class designation 75 and water tight ci cover with frame of 300 x 300 mm size ( inside ) the weight of cover to be not less than 13.00 kg and frame to be not less than 5 kg. as per standard design. ( cover min. 4.5 kg & frame min.2.7 kg ) 180x150 mm size p type with fps bricks , ex. phe 14 constructing masonry chamber 30x30x50 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement:4 coarce sand ) for stop cock complete with c.i. surface box 100x100x75mm ( inside ) with locking arrangement and rcc top slab 1:2:4 mix ( 1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size ) necessary excavation foundation concret 1:5:10 ( 1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortor 1:3 ( 1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design. , ex. phe 15 constructing masonry chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 ( 1 cement: 4 coarse sand ) for sluice valve, with c.i. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside ) with channel lid and rcc top slab 1:2:4 mix ( 1 cement: 2 coarse sand: 4 graded stone sggregate 20 mm nominal size ) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 ( 1 cement: 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design:with f.p.s. bricks , ex. phe 16 structual steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , ex. phe 17 making connection of gi distribution branch with gi main of 50 80mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete. , rain water harvesting 1 boring / drilling bore well of required dia for casing / strainer pipe, bysuitable method prescribed in is:2800 ( part i ) , including collecting sample from different strata , preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , rain water harvesting 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , rain water harvesting 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150 mm nominal size dia , rain water harvesting 4 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 5 supplying, filling, spreading & levelling gravel of size range 5mm to 10mm, in recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 7 providing and fixing bail plug / bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 ( part i ) . 100 mm dia , rain water harvesting 8 making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , rain water harvesting 9 constructing soak pit 1.20x1.20x1.20 m filled with brickbats including s.w. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 , tubewell 1 boring / drilling bore well of required dia for casing / strainer pipe, bysuitable method prescribed in is:2800 ( part i ) , including collecting sample from different strata , preparing and submitting strata chart / bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , tubewell 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , tubewell 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing ( cm ) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100mm nominal size dia , tubewell 4 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen ( rms ) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100 mm nominal size dia , tubewell 5 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , tubewell 6 providing and fixing bail plug / bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800 ( part i ) . 100 mm dia , submersible pump 35m deep boring with casing and pipe. supply of pipe etc supplying & installation of suitable 2hp submersible pump b.s or k.s.bor equivalent make with finolex cable 1x3x2.5 squmm ( upto 50mtr ) withflexible conduit 25mm dia, electrical out door pannel with required electrical fitting such as mcb of 0 25amp ( havell or indocopp or mds make ) , volt & ampere meter ( ae make ) , single phase preventer ( minilac or vsp 1 make ) starter ( l&t or bch make ) etc of approved make, 40mm hdpe pipe ( 25 mtr ) and all accessories complete as per requirement of site. , water purifier and cooler fitting and fixing single faucet storage type water cooler ( size 461 mm wide x 582 mm deep x 1217 mm height, weight 46 kg ) fully stainless body having storage capacity of 40 ltrs, cooling capacity of 40 ltrs. / hr. with hermetic type compressor, gas cooled motor equipped with over load protector, condensor for propeller type, thermostat autometically controlled temperature, refrigerent r 22, 230 volt, single phase 50 hertz, maximum current 2.3 amp including plug top and electrical lead wire connection upto 3 metres from the cooler, water inlet and drain out connections complete in all respects of voltas model no 40 / 40 tushar pss type or similar type of approved make. , water purifier and cooler 1 fitting and fixing water purifier for drinking purpose of capacity 6 litres / min, 5 purification system with reverse osmosis system with ultra ventilated membrane, tds500 to 2000 mgl / ppm, auto shut off with microswitch float manual flush facility, tds reduction 90% having automatic backwash system with filteration unit along with all accessories including plug top and electrical lead wire connection upto 3 metres from the purifier, water inlet and drain out connections complete in all respects similar to aquaguard or similar approved make ( model aquasure elegant ro water purifier of size width 360 mm x height 430 mm x depth 235 mm and weight 8.5 kg ) . , fire extinguisher 1 providing and fixing carbon di oxide type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. capacity 4.5 kg. , fire extinguisher 2 providing and fixing abc powder type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.capacity 6.0 kg. , electrical 1 wiring for light point / fan point / exhaust fan point / call bellpoint with 1.5 sq.mm frls pvc insulated copper conductorsingle core cable in surface / recessed steel conduit, withmodular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group c , electrical 2 wiring for twin control light point with 1.5 sq.mm frls pvcinsulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required. , electrical 3 wiring for group controlled ( looped ) light point / fan point / exhaust fan point / call bell point ( without independent switch etc. ) with 1.5 sq. mm frls pvc insulated copper conductor single core cable in surface / recessed steel conduit, and earthing the point with 1.5 sq. mm frls pvc insulatedcopper conductor single core cable etc. as required. group c , pvc conduit 1 supplying and fixing of following sizes of medium class 20mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 2 supplying and fixing of following sizes of medium class 32mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 3 supplying and fixing of following sizes of medium class 50mmpvc conduit along with accessories in surface / recessincluding cutting the wall and making good the same incase of recessed conduit as required. , electrical 4 wiring for light / power plug with 2x4 sq. mm frls pvcinsulated copper conductor single core cable in surface / recessed conduit alongwith 1 no. 4 sq. mm frls pvcinsulated copper conductor single core cable for loop earthingas required. , wiring frls pvc insulated copper conductor 2 x 2.5 sq. mm. + 1 x 2.5 sq. mm. earth wire , wiring frls pvc insulated copper conductor 1 2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire , wiring frls pvc insulated copper conductor 2 4 x 6 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 3 4 x 10 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 4 4 x 16 sq. mm + 2 x 16 sq. mm earth wire , s / f, gi box along with modular base & cover plate 1 or 2 module ( 75mm x 75mm ) , s / f, gi box along with modular base & cover plate 1 3 module ( 100mm x 75mm ) , s / f, gi box along with modular base & cover plate 2 4 module ( 125mmx75mm ) , s / f, gi box along with modular base & cover plate 3 6 module ( 200mm x 75mm ) , s / f, gi box along with modular base & cover plate 4 12 module ( 200mmx150mm ) , s / f modular switch / socket on the existing modular plate 5 / 6 amps switch , s / f modular switch / socket on the existing modular plate 1 15 / 16 amp switch , s / f modular switch / socket on the existing modular plate 2 3 pin 5 / 6 amp socket outlet , s / f modular switch / socket on the existing modular plate 3 6 pin 15 / 16 amp socket outlet , s / f modular switch / socket on the existing modular plate 4 telephone socket outlet , s / f modular switch / socket on the existing modular plate 5 tv antenna socket outlet , s / f modular switch / socket on the existing modular plate 6 bell push , electrical 5 supplying & fixing suitable size gi box wih modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, “c” curve including connections, painting etc. as required. ( for ac / geyser ) , electrical 6 supplying and drawing co axial tv cable rg 6 grade, 0.7 mm solid copper conductor pe insulated, shielded with fine tinned copper braid and protected with pvc sheath in the existing surface / recessed steel / pvc conduit as required. , electrical 7 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. , electrical 8 providing and fixing m.s. fan clamp type i or ii of 16 mm dia m.s. bar, bent to shape with hooked ends in r.c.c. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as required. , electrical 10 supplying and fixing 20 a, 240 v, spn industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 a c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. , electrical 11 supplying and fixing 20 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 12 supplying and fixing 30 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 13 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 8 way , double door , electrical 14 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 12 way , double door , electrical 15 supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 16 way, double door , electrical 16 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 6 way ( 4 + 18 ) , double door , electrical 17 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. ( but without mcb / rccb / isolator ) 8 way ( 4 + 24 ) , double door , electrical 18 supplying and fixing of following ways surface / recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs ( but without mcbs and incomer ) as required . ( note : vertical type mcb tpdb is normally usedwhere 3 phase outlets are required. ) 4 way ( 4 + 12 ) , double door , 40 a, rccb supplying and fixing following rating, double pole, ( single phase and neutral ) , 240 v, residual current circuit breaker ( rccb ) , having a sensitivity current 30 ma in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a mcb supplying and fixing 40 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 40 tp mcb , single pole mcb supplying and fixing 5 a to 32 a rating, 240 / 415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 63a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 100a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , l / f pvc sheathed / xlpe power cable in trench laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 95 sq. mm and upto 185 sq. mm , l / f pvc sheathed / xlpe power cable in trench 1 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm , l / f pvc sheathed / xlpe power cable over cable tray 2 upto 35 sq. mm ( clamped with 1mm thick saddle ) , l / f pvc sheathed / xlpe power cable over cable tray 3 above 35 sq. mm and upto 95 sq. mm ( clamped with 25x3mm ms flat clamp ) , l / f pvc sheathed / xlpe power cable over cable tray 4 above 95 sq. mm and upto 185 sq. mm ( clamped with 25 / 40x3mm ms flat clamp ) , l / f pvc sheathed / xlpe power cable over cable tray 5 above 185 sq. mm and upto 400 sq. mm ( clamped with 40x3mm ms flat clamp ) , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3.5c x 300 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 1 3.5c x 240 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 2 3.5c x 120 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3 3.5c x 95 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 4 3.5c x 50 sqmm, aluminium conductor cable a2xfy , s / m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 5 4c x 35 sqmm aluminium conductor cable a2xfy , cable tray 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 100 mm width x 50 mm depth x 1.6 mm thickness , cable tray 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 300 mm width x 50 mm depth x 1.6 mm thickness , cable tray 3 supplying and installing following size of perforated hot dipped galvanised iron cable tray ( galvanisation thickness not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 600 mm width x 62.5 mm depth x 2.0 mm thickness , cable tray “bends” supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.100 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.150 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.300 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends”3 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.450 mm width x 50 mm depth x 2 mm thickness , cable tray “bends” 4 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” ( galvanisation not less than 50 microns ) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.600 mm width x 62.5 mm depth x 2.0 mm thickness , mv cable supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 300 sqmm, aluminium conductor cable a2xfy , mv cable 1 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 240 sqmm, aluminium conductor cable a2xfy , mv cable 2 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 120 sqmm, aluminium conductor cable a2xfy , mv cable 3 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring ( round ( w ) or flat ( f ) as mentioned ) and with all components as mentioned , specifications, complete as required.3.5c x 95 sqmm, aluminium conductor cable a2xfy , earthing 1 earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required. , earthing 2 earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. , earthing 3 earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. , earthing 4 providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required. , earthing 5 providing and fixing 25 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required. , earthing 6 providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required. , earthing 7 providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for connections etc. as required. , fiting & fixtures 1 supply and installation of regular / standard model a.c. ceiling fan of 1400 mm sweep including wiring the down rods of standard length ( upto 30 cm ) with 1.5 sq. mm fr pvc insulated copper conductor etc as required. , fiting & fixtures 2 supplying and fixing single wall mounted 18 / 22 watt led type batten fitting complete with electronic driver and led tube etc directly on wall / ceiling includingconnections with 1.5 sq.mm fr pvc insulated copper conductor and earthing the body etc. as required. , fiting & fixtures 3 supply installation and comissioning ofintegrated batten made ( 2ft ) of ultra slim co extruded polycarbonate channel with housing part in white finish & diffuser part in reeded opal finish.white finish abs end caps with decorative circular coloured polycarbonate cap snap fitted on the end cap to enhance the aesthetic of the fixture. these end caps are snap fitted to the fixture.high efficiency long life led with lumen efficacy of 130 lm / w with viewing angle of 120º.powered by an integral isolated low thd electronic led driver ( smps based constant current supply ) with output short circuit protection, surge protection.can be fixed directly into the wall / ceiling by means of mounting ss clips provided with the fixture. ip 20, lumen output of 950 lumens with system efficacy of > 105lm / w .cri >80, color temperature 6500k, thd <20% and pf>0.95, ip20 . life class of 35, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz;internal surge protection:3 kv; protection including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. : , fiting & fixtures 4 supplying and fixing recess mounted 12 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 5 supplying and fixing recess mounted 18 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 6 supply, installation, testing and commissioning of 400 mm sweep, 65w, blade material aluminium blades , speed & oscillation 3 speed, pull cord for speed and oscillation.air delivery minimum 72 m³ / min, speed minimun 1350 revolution per minute.suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. , fiting & fixtures 7 supply installation and comissioning of 28w 2x2 panel recess mounting luminaire with high performance leds, suitable for mounting with armstrong / grid ceiling.crca powder coated white after phosphochromate treatment.high efficiency long life led package in integral module with lumen efficacy of >100 lm / w and viewing angle of 120° to ensure better uniformity.powered by an independent isolated, selv output electronic led driver ( smps based constant current supply ) with output short circuit protection, surge protection & other reliability test. lumen output of 3450 lumens.cri >80, color temperature 5700k, thd <10% and pf >0.95, ip20, ik03.life class of 50, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz;internal surge protection:3 kv; protection including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. : reverse polarity, open & short circuit. driver safety requirement standards :is 15885 2 13, test report to be submitted; photo biological safety norms: is 16108, test certificate to be submitted; certification: lm 79 for luminaire lm 80 for led source.cat ref havells :venusneohe2x2plr128wled857 or approved equivalent. , fiting & fixtures 8 supplying installation testing & commissioning ofb22 based 9w led 3 star bulb with 850 lumen, 6k color temperature including holder. , fiting & fixtures 9 supplying installation testing & commissioning of black painted extruded aluminium housing. green / red led’s mounted inside the housing. laser engraved signage matter on single / double acrylic sheet fixed on one side suitable for wall / ceiling / suspension type single / double sided display. in double sided version black paper is inserted. ni cd battery back up to 2 hrs. ( charged up to 8 10 hrs ) .mounting strings provided for pendent mounting operating voltage 150 280v ac ambient operating temperature. – 0 to 450c ingress protection – ip42.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. 220208 besl 03 led ssd wbb green 240 3 8wor220209 besl 03 led ssd wbb red 240 3 8wor220210 besl 03 led dsd wbb green 240 3 8wor220211 besl 03 led dsd wbb red 240 3 8w , fiting & fixtures 10 supply, installation, testing & erecting of ip66 bulkhead surface type lighting fixture 10w made up of pressure die cast aluminium housing and polyster powder coated die cast aluminium with high quality polycarbonate diffuser in opal finish for glare free light distribution.high efficiency long life led module with smd led package mounted on mcpcb with lumen efficacy of >95 lm / w with system lumen 950. powered by integral electronic led driver with apfc with low thd output short / open circuit protection. cct 5700, cri>80, system efficacy>90lm / w, thd<15%, pf>.95, ip66, ik 10, life class of 50, 000 hrs @ l70, operating temperature: 10 to +45 deg.c; input supply voltage range:140 270 v, frequency :50 60 hz.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required. cat ref: havells : hexaft10wled857ssymbopc or approved equivalent. , civil & misc works1 providing and fixing m.v. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works2 providing and fixing h.t. danger notice plate of 250 mm x 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works3 supplying and making cable route marker with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm x 60 cm at the bottom and 50 cm x 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. , civil & misc works4 supplying and fixing cable route marker with 10 cm x 10 cm x 5 mm thick g.i. plate with inscription there on, bolted / welded to 35 mm x 35 mm x 6 mm angle iron, 60 cm long and fixing the same in ground as required. , civil & misc works5 providing & fixing in position 1000 mm wide , electrical insulating rubber mats as per is 15652:2006, 2 mm thick, suitable up to 1.1 kv , fire retardant, no effect of acids, alkalis and transformer oils, moisture proof, high tensile strengthandtexture finish / cloth impression ( anti slip , marking on top ) , civil & misc works6 supply & fixing shock treatment chart duly mounted on a wooden frame with 5 mm thick glass as required ( approx front area 1.20 sq metre ) , 40 kvaups supplying, installation, testing and commissioningof online double conversion fully microprocessor based , indoor type, compact ups system of following rating with igbt based pwm technology to achieve thd < 3% and input power factor of greater than 0.95 at 50% loading, suitable for three phase ac input voltage 380 v to 440 v, 50 hz +3% / 3 % and three phase ac output voltage 415 ± 1% volts & frequency 50 ± 0.5 hz , inbuilt isolation transformer, necessary vrla batteries of suitable size having 30 minutes back up time , mounting rack including and suitable size connecting cable ( for ups to battery and battery to battery ) , static and maintenance bypass switch, snmp card for rs232 / ethernet ip computability for operation and monitoring etc. with all components as mentioned , specifications, complete as required.note : concerning vendor needs to furnish the battery sizing calculations at the time of ga approval and battery size has to be as per the approved ga drawing. , external lighting 1 supply and erection of 4 metre height hot dipgalvanized octagonal street light pole with followingarm with top dia 70 mm and bottom dia a / f 130 mm, made of 3 mm thick sheet along with base plate of size220 x 220 x 12 mm , small door opening for junctionbox mounting with mcb & connector, cement concreteof 1:3:6 including excavation, refilling and suitable sizefoundation bolts with template and all complete jobasrequired. ( but without pole collar ) single arm , external lighting 2 supplying and fixing 40 / 45 watt led type street lightwith die cast aluminium housing for ingress protectionof ip65 and complete with all accessories etc, onpole / building including connection with fr pvcinsulated copper conductor cable and earthing thebody etc. as required. , ip based cctv system 1 sitc of 2 megapixel @ 25fps, h.265 ip bullet camera, 1 / 2.9 cmos with 2.8~12mm varifocal lens, 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 2 sitc of 2 megapixel @ 25fps, h.265 ip dome camera, 1 / 2.9 cmos with 3.6 fixed mm 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 3 sitc of 2 megapixel @ 25fps, ptz camera h.265 ip dome camera, 1 / 2.9 cmos with 2.6 fixed lenslux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d / n, 3d dnr, roi coding, poe, onvif, ip66 etc. complete as required. , cctv 4 sitc of 32ch 4k ivr , h.265 / h.264 • 1080p real time • 4k display • dual lan • 8x hdd • raid •web plugin free h.265 / h.264 compression technology 4k display for clear monitoring up to 1080p 16ch decoding ability smart search ii smart vca event searchsupport raid 0, 1, 5 supported to prevent from recording data loss browsers supported: ie , smart functions : target count, electric fence, face detection, humaniod detection, retrograde detection, leave position detectio output, local & network backup etc. complete as required. , cctv 5 sitc of harddiskdrive8tb, 24 / 7surveillance category only complete etc as required.etc.all complete , cctv 6 sitc of 55 led narrow bazel for monitoring for nvr server etc. all complete. , cctv 7 sitc of rj 45 outlets near the cameras etc. all complete. etc. all complete. , cctv 8 sitc of cat 6 patch cords 1 meter high quality four pair twisted stranded cable terminated with rj45 modular plugs at both the ends. , signage 1 providing & fixing of building direction signage mounted on pole, with pole of 100x100mm shs ( square hollow section ) of height of 5600mm, and sign size of 900x1050, sign made of aluminiu c section of 60mm with internal framing to support the frame in ms tubes hollow section, frame work duly painted with anti rust coatings, with facia of 3mm thick exterior grade aluminium composite panel, cladded with uv cured digital printed retroreflective sheet of 3m make, and back panel of 3mm exterior grade acp, all pipes to be painted in approved color. cost shall includecost towards installation, including excuvation and filling up with specified pcc and fixing of foundation bolts as specified, also it shall include the designing charges.all complete as per direction by engineer in charge. , signage 4 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge , wall projected 250x210mm, both sides , signage 5 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge, door mounted, 300x80mm , 2 tr air conditioning 1 split ac ( inverter model ) : supply, installation, testing, commissioning of split type wall mounted air conditioning units of following capacity including inddor, outdoor unit fitted with inverter based rotary compressor fitted with rotary compressor, copper condensor and first charge refrigent r410a / eco friendly green gas only, all complete including all electrical connections to the electrical power supply system of the building, includingbut not limited to supply of all electrical plugs, etc., as necessary, lengthening of all electrical wires of ac units ( both indoor and outdoor ) , drain pipe andincluding suitable voltage stabilisers, etc. so as to place them in a concealed manner in the desired position. the copper pipes and electrical cables shall be concealed in approved manner and neatly run in straight lines in a workman like manner with proper supports. complete supply and installation of split2 tr star rating 3 star , refrigerant piping copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 25 mm od, wall thickness >= 1.2 mm ( insulation 19 mm thick ) , refrigerant piping 1 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 19.1 mm od, wall thickness >= 1.0 mm ( insulation 13 mm thick ) , refrigerant piping 2 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 15.9 mm od, wall thickness >= 0.8 mm ( insulation 13 mm thick ) , refrigerant piping 3 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work ( 19mm / 13 mm thick ) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 9.5 mm od, wall thickness >= 0.8 mm ( insulation 13 mm thick ) , drain piping providing and fixing of cpvc 6 kg / cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 20 mm , drain piping 1 providing and fixing of cpvc 6 kg / cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 32 mm , main oxygen manifold supply, installation, testing and commissioning of following gas manifold system ( excluding cylinders ) . the manifold is configured for designed numbers of cylinders and is suitable to withstand a pressure of 145 kg / cm2, along withhigh pressure copper annealed tail pipes with end brass adapter suitable for cylinders and manifold. top frame comprising of high pressure copper pipes of size 1 / 2” nb x 15swg with high pressure brass fittings made of high tensile brass and connections through nonreturn valves, the design of middle and bottomframes is provided to fit both round and flat bottom cylinders safely. the manifold is tested ( hydraulically ) at 3500 psig. ( it should be ce and iso 13485 certified ) mani fold oxygen manifold 6 + 6 cylinder banks complete with nrv, middle frame, bottom frame with ce marked, , emergency manifold emergency oxygen manifold 01 + 01 cylinder emergency manifold with complete regulator, nrv, middle frame & bottom frame, , control panelfor oxygen fully automatic three port control panel for oxygen supply, installation, testing and commissioning of automatic manifold control panel would provide a duty or standby gas supply from two cylinder banks with automaticchangeover the manifold indicates local status and has a remote indicator facility. automaticmanifold control panel would be designed to supply the mgps with a constant pressure supply via a control panel form two equal banks of cylinders and the changeover from the ‘duty’ to the ‘standby’ bank of cylinders would beautomatic. automatic changeover from the duty to the standby bank would occur at a cylinder pressure that will ensure the maximum usage of the contents of the duty bank. the changeover unit would be provided with monitoring todetect and display: duty bank operating, duty bank empty, standby bank operating, and standby bank below 10 % when the duty bank is empty, reserve bank low, pipeline pressure fault. there would be facility to connect liquidoxygen supply ( i.e. three port control panel ) ( it should be ce and iso 13485 certified ) fully automatic three port control panel for oxygen , emergency manifold line regulator emergency manifold line regulator supply, installation, testing and commissioning of emergency manifold line regulator i n p u t p r e s s u r e 1 5 0 k g / c m 2 working pressure 4 kg / cm2 it should be ce and iso 13485 certified.oxygen input pressure 150 kg / cm2 working pressure 4 kg / cm2capacity : 1500 lpm , cylinderconnectingpipe ( pig tail ) supply, installation, testing and commissioning of cylinder connecting pipe ( pig tail ) made up of flexible ss hose with safety cord 5 / 8 inch bsp gland nut and one side 1 / 2 inch bsp internal threads having one meter length. ( oxygen 24 , n2o 10, co2 4 ) , backpressurecompensated [ bpc ] oxygen flowmeter supply, installation, testing and commissioning of back pressure compensated [ bpc ] oxygen flow meter body should be made of brass material dully chrome plated and graduated from 0 15 l / m on an expanded lower scale forprecision setting at low flow and 5 15 l / m for general use. the humidifier bottle should be made up of unbreakable polycarbonate / polysulphone material and autoclavable at 121 degree centigrade temperature. it should be ceand iso 13485 certified. , oxygen gas outletfront loadeddin / bsstd gas outlet front loaded din / bs std:supply, installation, testing and commissioning of din / british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din / british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din / bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , medical air ( 4 bar ) outletfront loadeddin / bsstd gas outlet front loaded din / bs std:supply, installation, testing and commissioning of din / british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din / british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din / bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , quickconnectadapter din / british standard quick connect oxygen adapter ( safety probe ) , tube oxygen h.p. rubber tube white color, , alarm supply, installation, testing and commissioningof area pressure alarm panel would be witdigital display, closed circuit, self monitoringtype. the alarm would be designed to monitorthe line pressure in piping systems.it should be ce and iso 13485 certified. withfour digit notified no. area line pressure alarm 1 gases , isolation valve, supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified.42mm , isolation valve 2 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 28mm , isolation valve 3 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 22mm , isolation valve 4 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 15mm , isolation valve 5 supply, installation, testing and commissioning of the ball valves [ for dividing the pipelines into various zones for the case of maintenance ] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [ either fully open or fully closed ] . it should be ce and iso 13485 certified 12mm , pipeline 1 medical grade copper pipeline ( in mtrs. ) as per en 13348, 12 mm ( od ) x 0.7 mm thickness , pipeline 2 medical grade copper pipeline ( in mtrs. ) as per en 13348, 15 mm ( od ) x 0.9 mm thickness , pipeline 3 medical grade copper pipeline ( in mtrs. ) as per en 13348, 22 mm ( od ) x 0.9 mm thickness , pipeline 4 medical grade copper pipeline ( in mtrs. ) as per en 13348, 28 mm ( od ) x 0.9 mm thickness , pipeline 5 medical grade copper pipeline ( in mtrs. ) as per en 13348, 42 mm ( od ) x 1.2 mm thickness , hospital sheet patient bedtype iii with mattress overall sizes: ( l ) 2268 mm x ( w ) 922 mm x ( h ) 610 mmdescription: sheet bed should be a plain bed used in the recovery ward.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board / leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral whiteperformance specifications: maximum patient load should be 135 kgthickness mattress: 3+sandwitchconstruction: round corners yeshitlon thickness ( mm ) : 60hitlondensity ( gm / dcm3 ) : 23coir ( both side ) thicknessmm: 20density ( gm / dcm3 ) : 70, drc ( % ) : 22quilting combination / layers:pilled foam – quilting ( one side ) thicknessmm 14pilled foam density gm / dcm3 18pu foam / epe sheet side walling thicknessmm 3total mattress thickness mm 87rexine ( gsm ) : 150note: * finish product thickness should be measure from outer to outer surface. tolerance +5 mm , paediatric bed with mattress paediatric bed of overall sizes in mm: 1500 ( l ) x 850 ( w ) x 1210 ( h ) flat single section bed with grille frame on 4 sides.suitable for children up to 12 years.drop down grill frame on both sides for protection of the patient.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board / leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral white , bed side locker type i over all dimension :402mmlx422mm wx840mm ht .locker should have one cabinet and one drawer unit .both provided with cam lock .there should be gap between drawer and unit to keep general items for frequesnt use castors are provided for easy handling .drawer made up of crca sheet 1 mm thick and has ball slide for easy operation .top ss 304 sheet 0.8 mm thick castors 50 mmdia , hamdle abs ..powder coating of epoxy polyester , medicinetrolleytype i overall size902mm ( l ) x532mm ( w ) x915mm ( h ) .top shelf should be made of ss 304 sheetof 1 mm thick. supporting legs made of ss304 tubesection 30.30 mm dia.of 1.2 mm thick provided to suppoort the entire structure.ss 304 tube provided at the bottom for placement of instument being used .handle made up of ss 304 tubeof dia dia 16 mmand thickness 1.2 mm provided to handle trolley .and maneuver accordingly. high endurance anti static plastic injection moulded castors of 125 mm dia.ss should be finished in glossy mirror finish. max load capacity of 10 kg / shelf udl , round stooltype i overall sizes diagonal legdia 538 mmh470 min 655max.ss 202 made sheet with spin section of thickness 1mm & should be non corrosive. it should have a diameter of 305mm, seat base is made of ms ring and rectangular tube.en8 screw having dia of 22 mm should be used for height adjustment of the seat base.the hub should be made of ms erw tube having dia of 38mm and thickness 2 mm.the hub should be welded with the legs and it should accommodate and cover the lead screw mechanism.the understructure should consist of 4 legs made up ofms erw tube of diameter 25.4 mm and 1.6mm thick. the press formed pipe leg should give a round & clean look. all the legs should be provided with 4 nos of nylon 6 bush.all metal componentsshould be pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbialepoxy polyster powder coating . all welding should be co2 argon welding to minimise rusting on the welding areas.safe working load must be 135kg , strecher on trolley type i 2005mm ( l ) x666mm ( w ) x827mm ( h ) .the trolley should be made of 31.75 and 25.4 mm dia 1.6 mm thick erw tube.holder for stretcher should be made up of mild steel.castor should be of 200 mm dia , diagonal locking castor.stretcher should be made up oferw tubeof dia 25.4 mm and thickness 1.6 mm.top sheet should be made of crca sheetof thickness 1.2 mm with contour shape to accommodate patient.iv pole holder should be made ofms .maximum safe work load should be 135 kg.to ensure qood quality welding co2 argonprocess should be adhered to.all metal componentsshould be pre treated with zinc phosphating in 9 tank porcess and then powder coated with anti microbialepoxy polyster powder coating.goods should be supplied in knocked down construction to reduce carbon emission. performance test :proof loading test , cycle tests , impact test, salt spray test, castor break test, the manufacturer should compilant with iso 9001, 14001, 13485, ohsas 1800 and ce certification. , doctor desk type x s / f / f executive table main desk should be of dimesion : 1350w x 750d x 750h.the table top should bein white cedar, side panelsin black, while the modestypanel ina combination of black & white cedar. side panels : ( black ) made form 18mm thick plt with pvc lipping.modesty panel : made form 18mm thick plt with pvc lipping. bigger upper panel in black and smaller lower panel in white cedar. made from 18mm thick plt with pvc lipping. mobile pedestal : one box and one filing drawer with 18mm thick plb fronts and top. handles : black powder coated die cast aluminum alloy handles. mobile pedestal and hdu are fitted with central lock. , chair type iii s / f / f executive chair1 ) seat / back assembly: the seat and back are made up of 1.2 cm. thick hot pressed plywood, upholstered withfabric upholstery covers and moulded polyurethane foam. the back foam is designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area.high back size : 47.5 cm ( w ) x 69.5 cm ( h ) seat size : 47.0 cm. ( w ) x 48.0 cm. ( d ) 2 ) polyurethane foam: the polyurethane foam is moulded with density = 45 + / 2 kg / m 3and hardness = 20 + / 2at 25% compression. 3 ) armrests: the one piece armrests are injection moulded from black co polymer polypropylene. 4 ) center tilt synchro mechanism : the mechanism is designed with the following features:• 360 revolving type. • upright position locking. • tilt tension adjustment.• seat / back tilting ratio of 1:3 ( 60 seat tilt / 180 back tilt ) . 5 ) pneumatic height adjustment : the pneumatic height adjustment has anadjustment stroke of 12.0 cm. 6 ) telescopic bellow assembly : the bellow is 3 piece telescopic type and injection moulded in black polypropylene. 7 ) pedestal assembly , staff / visitor chair type i chair of over all size: 58.0cm ( w ) x 56.5cm ( d ) x 87.5cm ( h ) & 48.0cm ( sh ) seat / back assembly: the seat and back are made from chemically treated and seasoned wood, upholstered with plywood, black leather cloth, and u foam.*back size: 46.0cm ( w ) x 27.0cm ( h ) .*seat size: 46.0cm ( w ) x 40.0cm ( d ) .armrest tube: the armrest tube is made of m.s. e.r.w. tube dia. 2.54cm. ( 1” ) x 16bg thick and powder coated.armrest: the armrest is gas assisted injection moulded from black polypropylene.understructure assembly: the understructure assembly is a cantilever type frame made of dia. 2.54cm. ( 1” ) x 14bg. thick m.s. e.r.w. tube and powder coated. , wheel chair type i ( l ) 790 x ( w ) 600 x ( h ) 870mm.foldable frame structure should be made of section 22diax1.2mm a3 carbon steel with chrome finish. cross bar should be made of a3 carbon steel with section 25.4 x 1.2mm.rear wheel:24 inch solid mag wheels with alloy in the rim .integrated handrim provide to drive the wheel chair of section 16x1.2mm a3 carbon steel with chrome finish.front wheel :8 inch hub made of pa polymer and outer with solid rubber.pu molded arm rest & base should be made of abs for better arm support .leatherite strap for calf rest & leatherite cushion for seat.adjustable alluminimum die cast foot rest with updown & swivel type mechanism.handles should be made of moulded rubber grip to push the wheelchair.hand brakes should be provided to lock the wheelchair at desired location.foot pressextended base with molded plastic for better grip.anti rust chrome finsh. safe work load of100 kg , basin stand type i ht 850 mm ss bowl ms tubular frame of dia 25.4 x1.2 mm tube work mounted on three 50 dia.non rusting castors all without brack. ss part finished with matt polish , kick buckettype i overa all dimension of the bucket should be 517 mm ( l ) x 517 mm ( w ) x 210 mm h.it should made of 12.7 mm dia and 1.6 mm thick ss 304 ring. the bowl should be ss made of .8 mm thck .3 nos 50 mm diahigh endurance plasticinjection moulded castors should be provided for the movement.mx load bearing capacity should be 10 kg. , hospital curtain tracks & i.v. tree system supply installation testing & commissioning of cubical tracks system made of powder coated aluminium alloy, stain free polyster fabric , water repellent curtains , smooth movement , non sticking runnner with stainless steel hooks made from mirror finish stainless steel , adjustable height with all accessories. total quantity : 1...
30321290 supply of procurement of wire ropes (new design) consisting of 5 itemsprocurement of wire ropes (new design) consisting of 5 items,main hoist wire rope of construction 35x7 (iwrc) of special design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction), compact strands, self lubricated, rotation resistant, d26x470m,rgg, langs lay, un galvanized,1960 n/sq.mm , minimum breaking load 519.5 kn with accessories for 140t new design crane. drg.no.jmp/cr 189/03,alt 6. , aux. hoist wire rope of construction 35x7 (iwrc) of special design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction), compact strands, self lubricated, rotation resistant, d22x130m, rgg, langs lay, un galvanized , 1960 n /sq.mm , minimum breaking load 373 kn with accessories for 140t new design crane. drg.no.jmp/cr 190/03,alt 7. , derrick wire rope of construction 8x26 (iwrc) plastic impregnated, compact strands, self lubricated, a26x390m, lgg, ordinary lay, un galvanized, 1770 n/ sq.mm, minimum breaking load 504.7 kn with accessories for 140t new design crane. drg. no.jmp/cr 191/03,alt 6. , derrick wire rope of construction 8x26 (iwrc) plastic impregnated, compact strands, self lubricated, a26x390m, rgg, ordinary lay, un galvanized, 1770 n/ sq.mm, minimum breaking load 504.7 kn with accessories for 140t new design crane. drg. no.jmp/cr 191/03,alt 6. . , recovery winch wire rope of construction 35x7 (iwrc of special design avoiding cross over between the strands of the core & reducing the danger of internal rope destruction), compact strand, self lubricated, rotation resistant, d18x110m, lgg, langs lay, un galvanized, 1960 n/ sq.mm, minimum breaking load 246 kn with accessories for 140t new design crane. drg.no.jmp/cr 192/03,alt 5. ....
30312287 bids are invited for 0000 m6339600 is 9507: winch: 6 ton: elec. driven (q3) () total quantity : 1...
29866294 bids are invited for screw jack apparatus with weights screw jack apparatus with weights , worm and worm wheel :: single with weights worm and worm wheel :: single with weights , worm and worm wheel :: double with weights worm and worm wheel :: double with weights , worm and worm wheel :: tripple with weights worm and worm wheel :: tripple with weights , wheel and differential axle 30 cm with weight wheel and differential axle 30 cm with weight , winch crab single purchase with weight winch crab single purchase with weight , winch crab double purchase with weight winch crab double purchase with weight , universal force table ( normal ) universal force table ( normal ) , moment of inertia of flywheel 25 cm with weights moment of inertia of flywheel 25 cm with weights , parallel forces apparatus ( dial type 10 kg. balance ) parallel forces apparatus ( dial type 10 kg. balance ) , simply suported beam apparatus with weights simply suported beam apparatus with weights , friction slide apparatus with weight friction slide apparatus with weight , thermal conductivity of metal rod apparatus the experimental set up consists of metal bar, one end of which is heated by an electric heater while the other end of the bar projects inside the cooling water jacket. a cylindrical shell filled with insulating material surrounds the middle portion of the bar. the temperature of the bar is measured at different sections. heat input to the heater is given through variac. by varying the heat input rates, data can be obtained. water at constant rate is circulated through the jacket and its flow rate and temperature rise is noted.technical details:metal barmaterial: copperlength : 400 mm ( approx. ) diameter: 25 mminsulating shelllength : 250 mmdiameter: 200 mmcooling water jacketdiameter : 100 mmlength : 75 mmheater : nichrome wire.water flow measurement : by measuring cylindercontrol panel comprising ofdigital voltmeter: 0 300 volt.digital ammeter: 0 2 amp.variac :0 230 v, 2 amp.digital temp. indicator: 0 199.90c, with multi channel switch, ( universal input ) temperature sensors : rtd pt 100 type. ( 8 nos ) with standard make on / off switch, mains indicator etc.instruction manual : an english instruction manual will be provided along with the apparatusthe whole setup is mounted on a powder coated base plate. , heat transfer coefficient of composite wall apparatus the setup consists of a heater sandwiched between two sets of slabs. three types of slabs are provided on either sides of heater, which forms a composite structure. a small hand press frame is provided to ensure the perfect contact between the slabs. a variac is provided for varying the input to the heater. digital voltmeter and digital ammeter display the heat input. heat produced by heater flows axially on both the sides. temperature sensors are embedded at the interfaces of slabs to determine the temperature gradient. the experiment can be conducted at various values of heat input and calculation can be made accordinglytechnical data:slab assembly arranged symmetrically on both sides of heater.slab material: slab sizecast iron: 250 mm dia. & 20mm thick.bakelite: 250 mm dia. & 15 mm thick.press wood: 250 mm dia. & 12 mm thick.heater : nichrome wire.control panel comprising of :digital voltmeter: 0 300 volts.digital ammeter: 0 2 amp.variac: 0 230 v, 2 amp.digital temp. indicator: 0 2000c, with multi channel switchtemp. sensors : rtd pt 100 type. ( 8 nos ) with standard make on / off switch ( l & t make ) , mains indicator etc.instruction manual: an english instruction manual will be provided along with the apparatus.cabinet to accommodate the slab assembly with front window of glass / acrylic.the whole set up is mounted on a base plate. , pin fin apparatus the setup is designed to study the heat transfer in a pin fin. it consists of pin type fin fitted in a duct. a fan is provided on one side of duct to conduct experiments under forced draft conditions. air flow rates can be varied. a heater heats one end of fin and heat flows to another end. heat input to the heater is given through variac. digital voltmeter and digital ammeter are provided for heat measurement. digital temperature indicator measures temperature distribution along the fintechnical details:fin: pin type.material: brass.size: 12.5 mm ( approx. ) 15 cm. long ( approx. ) .duct: made of ms.fan: standard makes.air flow measurement: orifice meter & u tube manometer.heater : band type, nichrome wire.control panel comprising of :digital voltmeter: 0 300 volt.digital ammeter: 0 2 amp.dimmerstat: 0 230 v, 2 amp.digital temp. indicator: 0 2000c, with multi channel switchtemperature sensors : rtd pt 100 type.5 for pin and 1 for duct temperature.with standard make on / off switch, mains indicator etc.instruction manual: an english instruction manual will be provided along with the apparatusthe whole setup is mounted on a m.s. powder coated stand. , natural convection heat transfer apparatus the setup consists of a brass tube fitted in a rectangular duct in a vertical position. the duct is open at the top and bottom, and forms an enclosure that serves the purpose of undisturbed surrounding. one side of the duct is fitted with a transparent acrylic window for visualization. an electric heating element is kept in the vertical tube that in turns heats the tube surface. the heat is lost from the tube to the surrounding air by natural convection. the temperature of the vertical tube is measure by temperature sensors and displayed by a digital temperature indicator with multi channel switch. the heat input to the heater is measured by a digital ammeter and a digital voltmeter and is varied by a variac. the tube surface is polished to minimize the radiation losses.technical details:test section:diameter: 38 mm ( approx ) .length : 500 mm ( approx ) .heater: nichrome wire.control panel comprising of:digital voltmeter: 0 300 volt.digital ammeter: 0 2 amp.variac : 0 230 v, 2 amp.digital temp. indicator: 0 2000c, with multi channel switchtemperature sensors: rtd pt 100 type.with standard make on / off switch, mains indicator etc.instruction manual : an english instruction manual will be provided along with the apparatus.painted duct of ms to accommodate the assembly with front window of acrylic.the whole set up is well designed and arranged on a powder coated structure.experimentation:to determine average heat transfer coefficient under natural convection. , heat exchanger ( parallel flow and counter flow ) heat exchanger is a device in which heat is transferred from one fluid to another. the apparatus consists of a concentric tube heat exchanger. hot water flows through inner tube in one direction only and cold water flows through the outer tubes. direction of cold fluid flow can be changed from parallel or counter to hot water so that unit can be operated as parallel or counter flow heat exchanger. flow rates of hot and cold water are measured using rota meters. a magnetic drive pump is used to circulate the hot water from a re cycled type water tank, which is fitted with heaters and digital temperature controller.system : water to water, concentric tube typeheat exchanger: length 1.6m ( approx. ) insulated with ceramic wool and cladded by aluminium foil.outer tube: material stainless steel. id 27.5mm, od 33.8 mm ( approx ) inner tube: material stainless steel, od 12.7mm ( approx ) water flow measurement: rotameters ( 2nos. ) one each for cold & hot fluid.hot water tank: made of stainless steel. insulated with ceramic fibre wool.hot water circulation : magnetic pumpheater : nichrome wire heatercontrol panel comprising of :digital temp. controller: 0 199.90c ( for hot water tank ) digital temp. indicator : 0 199.90c, with multi channel switchtemperature sensors : rtd pt 100 type.with standard make on / off switch, mains indicator etc.instruction manual : an english instruction manual will be provided along the apparatus.a good quality painted rigid ms structure is provided to support all the parts.experimentation:to calculate the following parameters both for parallel and counter flow arrangement:rate of heat transfer.lmtd.overall heat transfer co efficient.to compare the performance of parallel and counter flow heat exchanger. , pelton turbine test rig setup is a model of a pelton turbine demonstrating the function of an impulse turbine.the experimental unit consists of the pelton wheel, a needle nozzle used as distributor, a band brake for loading the turbine and a housing with a transparent front panel. the transparent cover enables to observe the water flow, the pelton wheel and the nozzle during operation. the nozzle cross section and thus the flow rate are modified by adjusting the nozzle needle.the turbine torque is determined by force measurement on a band brake and is read on spring balances. for measuring the rotational speed, a non contact speed sensoris provided. a manometer shows the water pressure at the turbine inlet.specification1. function of a pelton turbine2. transparent front panel for observing the operating area3. loading the turbine by use of the band brake4. adjustable nozzle needle for setting different nozzle cross sections5. marking on brake drum for non contact speed measurement6. instruments: spring balances for determining the torque, manometer shows pressure at turbine inlettechnical data:bench top unit.frame and panels made of painted steel.main metallic elements made of stainless steel.pelton turbine:speed range: 0 2000 rpm.torque: 20n.number of buckets: 16.drum radius: 30 mm.brake:pulley diameter: 60 mm.effective radius: 50 mm.water pump, :maximum pressure: 7 bar.maximum water flow: 80 l / min at 5.4 bar.measuring rangespressure: 0 to 100 psi ( 0 to 6.7 bar ) .breaking force–spring balance: 0 50n.flow sensor: 2 to 150 l / min.speed sensor: 0 10000 rpm.water tank capacity: 130 l approx. , francis turbine test rig the experimental unit consists of the rotor, the distributor with adjustable guide vanes, a band brake for loading the turbine and a housing with a transparent front panel. the transparent cover enables to observe the water flow and the rotor during operation. the angle of attack and thus the power of the rotor are modified by adjusting the guide vanes.the turbine torque is determined by force measurement on a band brake and is read on spring balances. for measuring the rotational speed, a non contact speed sensor is installed. a manometer shows the water pressure at the turbine inlet.technical datafunctional model of francis turbine, with a distributor with adjustable guide vanes that allows to control the water angle of incidence of the turbine:diameter of the turbine: 52 mm.speed range: 0 1200 r.p.m. approx.rotor:number of blades of the turbine: 15.stator:number of adjustable guide vanes of the distributor: 10.braking system:band brake with adjustable braking tension.water pump:maximum height: 70 m.maximum pressure: 7 bar.maximum water flow: 120 l. / min.power: 1.5 kw.water tank: capacity 130 l. approx.measuring rangespressure : 0 to 100 psi ( 0 to 6.7 bar ) .breaking force – spring balance: 0 50n.flow sensor, range: 0 to 200 l. / min.speed sensor, range: 0 to 10000 rpm. , reciprocating pump test rig the experimental unit provides the basic experiments to get to know the operating behaviour and the important characteristic variables of piston pumps.setup features a closed water circuit with water tank, a piston pump with variable speed via a frequency converter and an air vessel. the piston of the pump is mounted in a housing and can be observed during operation. the cycle that takes place ( intake and discharge of water ) can be shown clearly in the p v diagram. the pulsating pressure curve of the pump can be damped with the aid of the air vessel. flow rate and head are adjusted via a needle valve and overflow valve.the experimental unit is fitted with manometer for pressure and sensor for flow rate. pressure manometer measures the pressure at the outlet of the pump.specification:• functioning and operating behaviour of a piston pump• closed water circuit contains piston pump with variable speed via frequency converter, transparent water tank and air vessel•valve for adjusting the flow rate• overflow valve for adjusting the head• pulsation damping of the head using air vessel with bleed valve•manometer for pressure at pump outlet.technical details:piston pumpspeed: 30…180min 1max. flow rate: 135l / hmax. head: 40mdrive motorpower: 180wgear transmission ratio: i=7, 5overflow valve: 1…4barmeasuring rangespressure ( outlet ) : 0…5barflow rate: 0, 2…6l / min total quantity : 1...
29777649 bids are invited for pile boring, providing and installation bored cast in situ reinforced cement concrete piles of grade m 25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using direct mud circulation (dmc) or bailer and chisel technique by tripod and mechanical winch machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap).450mm dia piles (inclusive of carriage) , pcc providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering all work up to plinthlevel : 1:3:6 (1 cement : 3 coarse sand (zone iii) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) (inclusive of carriage) , rcc providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland /portland slag cement, admixtures in recommended proportion as per is: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer in charge; for the following grades of concrete. note: extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re design the mix or bear the cost of extra cement. (inclusive of carriage) , brick work brick work with bricks of class designation 100a in foundations and plinthin :cement mortar 1:4 (1 cement : 4 coarse sand) (inclusive of carriage) , sand filing supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.(inclusive of carriage) with lead upto 3 km , shuttering centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete , reinforment steel steel reinforcement for r.c.c. work ready to use cut and bend rebars of approved make from factory/workshop to construction site including placing in position and binding all complete thermo mechanically treated bars of grade fe 500d or more. , plinth protection making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone iii) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. , door & window providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. (glazing, paneling and dash fasteners to be paid for separately) :powder coated aluminium (minimum thickness of powder coating 50 micron) , glass providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . (cost of aluminium snap beading shall be paid in basic item):with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) , upvc door providing and fixing of factory made upvc white colour casement door, upvc multichambered extruted frame, sash and mullion profile. frame duly reinforced with 1.2mm gi section box tpe chamber and sash with 1.5mm thick gi section (± 0.2mm) based on wind load calculations (shape and size according to upvc profiles), appropiate dimentions of upvc extruded glazing bead, epdm gasket (k/o type), seperate drainage system, ss34 grade friction hinges 2d/3d plate hinges, zinc alloy (white powder coated) casement handle, gi fastener 8x100 mm size for fixing frame to finish wall, plastic packer and caps and necessary steel screws etc.profile of frame and sash shall be metered cut and fusion welded at all corners, mullion shall be also fusion welded/joined mechanically including drilling of holes for fixing hardware and drainage of water etc. after fixing of frames , gap between frame and adjascent wall shall be filled with pu foaam / backer rod required size and the approved quantity. after that sealed with weather proof silicon sealant at both side, all complete as per approved drawing and direction of eic , door closer providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. , door providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including stainless steel butt hinges wirhnecessary screws , door stopper providing and fixing aluminium hanging floor door stopper, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. single rubber stopper , soling providing designation 100 a one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as perbuilding specification and direction of e/l, , tile 1 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm , tile 2 providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. , tile 3 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. , granite providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge :flamed finish granite stone slab jet black, cherry red, elitebrown, cat eye or equivalent. , false ceiling providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflectance ? 85%, thermal conductivity k = 0.052 0.057 w/m k, fire performance as per (bs 476 pt 6 &7)in true horizontal level suspended on interlocking t grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mmwith 16 mm thick beveled tegular mineral fibre antimicrobial false ceiling tile confirming to iso 5 (class 100) specifications , pre fabsteel designing, providing, installing and fixing factory finished custom designed cold form light gauge steel framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. the steel sheet shall be galvanized (az 150gms aluminium zinc alloy coated steel having minimum yield strength 300 550 mpa) conforming to aisi specifications and ibc 2009 for cold formed steel framing and construction and also as per is: 875 1987, iso 800 1984 and is:801 1975. the wind load shall be as per provisions of is 875 (part iii). lgsfs frame shall be designed as per is: 801 using commercially available software such as frame cad pro 11.7/ staad pro v8i/ architekv2.5.16/ revit architecture 2011 or equivalent. proper usage of connection accessories like heavy duty tension ties, light duty hold ons, twist straps (to connect truss with wall frames), strong tie, tie rod, h brackets, boxing sections, l shaped angles for better structural stability. the framing section shall be cold form c type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple/ slot at required locations as per approved drawings. , pre fabwall providing and fixing of external wall system on light gauge steel frame work with outer face cement boards as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c/c of approved make. , pre fabin. wall providing and fixing internal wall panels on light gauge steel frame work with 12.5mm thick gypsum plaster board conforming is 2095:2011 fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c/c of approved make, screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately , roof sheet supply & installation of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer in charge) 0.50 mm +/ 5% total coated thickness (tct) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by engineer in charge. the sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with epdm seal or with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead complete upto any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. , ridge plain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/ 5% total coated thickness (tct) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling/ self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : ridges plain (500 600mm). , gutter drain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/ 5% total coated thickness (tct) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling/ self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : gutter , flashing providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 5% total coated thickness (tct), zinc coating 120gsm as per is: 277 in 240mpasteel grade, 5 7 microns epoxy primer on both side of the sheet and polyester topcoat 15 18 microns using self drilling/ self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumenwashers complete :flashings/ aprons. (upto 600 mm) , under deck insulation providing and fixing thermal insulation of ceiling (under deck insulation) with resin bonded rockwool conforming to is: 8183,density 48 kg/ m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. , resin bonded rock wool providing and fixing thermal insulation with resin bonded rock wool conforming to is: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 g virgin polythene bags fixed to wall with screw, rawel plug & washers and held and in position by criss cossing gi wire etc. complete as per directions of engineerin charge. , face panel providing and fixing in all exterior face panels breathable vapour barrier underneath the cementfiber board as per national building code 2009 complete as per direction of engineer in charge. , lap siding supplying and installation of moisture resistant/fire resistantlap siding 8 mm thick and width as per standard sizes made ofiber cement board with embossed decorative finish to give pleasing exterior fixed horizontally with staggered joints including minimum over lapof 32 mm external cement fibre boardconforming to is 14862:2000 offixed with self drilling / taping screws/fastners of approved make. , putty providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distemper distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1 new work (two or more coats) over and including water tinnable priming coat with cement primer , ex. paint finishing walls with textured exterior paint of required shade : new work (two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm sqm , oil paint painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work . , steel 2 steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. hot finished welded type tubes , excavation earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. , road providing and laying c.c. pavement of mix m 25 with ready mixed concrete from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc.complete as per specifications and directions of engineer in charge. (the panel shuttering work shall be paid for separately). (note: cement content considered in this item is @ 330 kg/cum. excess/less cement used as per design mix is payable/ recoverableseparately). , paver block providing and laying 60 mm thick factory made cement concrete interlocking paver block of m 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thickcompacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer in charge. , phe 1 providing and fixing salem stainless steel a isi 304 (18/8) kitchen sink as per is: 13983 with ci brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.kitchen sink with drain board 510x1040mm bowl depth 200mm. , phe 2 providing and fixing salem stainless steel a isi 304 (18/8) kitchen sink as per is: 13983 with ci brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.sink without drain board 610x510 mm bowl depth 200mm. , phe 3 providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing:rectangular shape 453x357 mm , phe 4 providing and fixing toilet paper holder:c.p. brass , phe 5 providing and fixing water closet squatting pan (indian type w.c.pan) with 100 mm sand cast iron p or s trap, 10 litre low fixturescomplete, including cutting and making good the walls andlevel whitep.v.c. flushing cistern, including flush pipe, with manually controlleddevice (handle lever) conforming to is : 7231, with all fittings andfloors wherever required :white vitreous china orissa pattern w.c. pan of size580x440 mm with integral type foot rests , phe 6 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : w.c. pan with isi marked white solid plastic seat and lid , phe 7 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer in charge , phe 8 providing and fixing cp brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge..(sink & urinal) , phe 9 providing & fixingptmt towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealedfittings arrangement of approved quality and colour weighing not less than 88 gms , phe 10 providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms.15mm nominal bore , phe 11 providing and fixing c.p. brass bib cock of approved quality confirming to is:893115mm nominal bore , phe 12 providing and fixing c.p.brass angle valve for basin mixer and geyser points of approved quality conforming to is 8931 a) 15 mm nominal bore.15 mm nominal bore , phe 13 providing and fixing wash bashin with c.i. brackets, 15mm dia cp brass singal hole basin mixer of approved quility and make, including painting of fittings and brackets, cutting and making good the walls wherever required white vitreous china surgeon type wash basin of size660x460 mm with a pair of 15 mm c.p. brass pillar tapswith elbow operated levers , phe 14 providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. , phe 15 providing and fixing white vitreous china laboratory sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p brass waste and 40mm c.p. brass trap with necessary c.p. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :size 600x450x200 mm , phe 16 providing and fixing cp brass single lever telephonic wall mixer of quality & make as approved by engineer in charge . a) 15 mm nominal dia. , phe 17 providing and fixing cp brass shower rose with 15 or 20 mm inlet100 mm diameter , phe 18 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. , phe 19 providing and fixing ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. , phe 20 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. (internal work) 40 mm dia, nominal bore , phe 21 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. (internal work)50 mm dia, nominal bore , phe 22 two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand andmanufacturetwo more coast on new work , phe 23 p/f m.s. cap 100 mm dia , phe 24 providing and fixing, upvcpipes 6 kg/cm2(is: 4985) including all fittings (plain or door) e.g. bends, junction, offsets, access pieces, jointing with rubber ring/solvent cement joints includingrequired suports,cutting chase or holes in walls and floors and making good where required.75 mm dia pipe , phe 25 providing and fixing, upvcpipes 6 kg/cm2(is: 4985) including all fittings (plain or door) e.g. bends, junction, offsets, access pieces, jointing with rubber ring/solvent cement joints includingrequired suports,cutting chase or holes in walls and floors and making good where required.110 mm dia pipe , phe 26 providing & fixing on wall face unplasticised rigid pvc rain water pipes conforming to is:13592 tyape a included jointing with seal ring conforning to is:5382 leaving 10 mm gap for thermal expansion. (i)single socketed pipes.110 mm diameter , phe 27 providing, fixing on wall face unplasticised pvc moulded fittings /accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. coupler 110 mm diameter , phe 28 providing, fixing on wall face unplasticised pvc moulded fittings /accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. bend 87.5 deg 110 mm diameter , phe 29 providing, fixing on wall face unplasticised pvc moulded fittings /accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. shoe 110mm shoe , phe 30 providing & fixing unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50mm hard wood plugs, screwed with .m.s. screws of required length including cutting brick work and fixing in cement mortar 1:4(1cement : 4 coarse sand) and making good the wall etc. complete.110 mm dia , phe 31 providing and fixing cpvc pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 20 mm nominal outer dia pipes , phe 32 providing and fixing of gun metal gate valve with ci wheel of approved quality (screwed ends)25mm dia, nominal bore , phe 33 providing and fixing of gun metal gate valve with ci wheel of approved quality (screwed ends) 32 mm dia, nominal bore , phe 34 providing and fixing gun metal non return valve of approved quality (pn 1.6)40 nominal bore , phe 35 providing and fixing brass stop cock of approved quality15mm nominal bore , phe 36 butterfly valve (manual) with c i body ss disc, nitrile rubber seal & o ring pn 16 pressure rating for chilled water/hot eater circulation as specified 65 nominal bore , phe 37 butterfly valve (manual) with c i body ss disc, nitrile rubber seal & o ring pn 16 pressure rating for chilled water/hot eater circulation as specified80 nominal bore , phe 38 providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete25 mm nominal bore , ex. phe 1 providing and fixing c.i. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (the tail pieces, tapers etc if required will be paid separately) :50 mm dia , ex. phe 2 providing and fixing c.i. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (the tail pieces, tapers etc if required will be paid separately) :80 mm dia , ex. phe 3 providing and fixing c.i. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (the tail pieces, tapers etc if required will be paid separately) :100 mm dia , ex. phe 4 providing & fixing c.i.sluice valve(with cap)complete with bolts,nuts,rubber insertions etc.(the tail pieces if required will be paid separately)100 mm dia.pipe , ex. phe 5 providing & fixing c.i.sluice valve(with cap)complete with bolts,nuts,rubber insertions etc.(the tail pieces if required will be paid separately)150 mm dia.pipe , ex. phe 6 providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm.clear depth and 250mm apron including cost of e/w. involved with 75mmcement concrete (1:4:8) over one brick designation 100 a flat soling inproper grade and slope at the base.the drain duly.plastered in cm. (1:3)with punning over exposed surface all complete as per buildingspecification and direction of e/l, , ex. phe 7 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil (hard or soft) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [hard/dense soil] pipes,cables etc.exceeding 80mm dia.but not exceeding 300mm dia. , ex. phe 8 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil (hard or soft) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [hard/dense soil] pipes,cables etc.exceeding 80mm dia. exceeding 300mm dia. , ex. phe 9 providing and laying non pressure np2 class (light duty) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. (for storm drainage)250 mm dia rcc pipe , ex. phe 10 providing and laying non pressure np2 class (light duty) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. (for storm drainage)300 mm dia rcc pipe , ex. phe 11 providing and laying non pressure np2 class (light duty) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. (for storm drainage)450 mm dia rcc pipe , ex. phe 12 inside size 120x90 cm and 90 cm deep including c.i. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 , ex. phe 13 providing and fixing square mouth sw gully trap grade ‘a’ complete ci grating brick masonry chamber with bricks of class designation 75 and water tight ci cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 13.00 kg and frame to be not less than 5 kg. as per standard design.(cover min. 4.5 kg & frame min.2.7 kg )180x150 mm size p type with fps bricks , ex. phe 14 constructing masonry chamber 30x30x50 cm,inside with 75 class designation brick work in cement mortar 1:4 (1 cement:4 coarce sand) for stop cock complete with c.i. surface box 100x100x75mm (inside) with locking arrangement and rcc top slab 1:2:4 mix (1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size) necessary excavation foundation concret 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortor 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. , ex. phe 15 constructing masonry chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement: 4 coarse sand) for sluice valve, with c.i. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with channel lid and rcc top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone sggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design:with f.p.s. bricks , ex. phe 16 structual steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , ex. phe 17 making connection of gi distribution branch with gi main of 50 80mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete. , rain water harvesting 1 boring/drilling bore well of required dia for casing/ strainer pipe, bysuitable method prescribed in is:2800(part i ), including collecting sample from different strata , preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , rain water harvesting 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing (cm) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , rain water harvesting 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen(rms) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150 mm nominal size dia , rain water harvesting 4 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 5 supplying, filling, spreading & levelling gravel of size range 5mm to 10mm, in recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 6 supplying, filling, spreading & levelling coarse sand of size range 1.5mm to 2mm, in recharge pit, in required thickness over gravel layer,for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 7 providing and fixing bail plug/ bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800(part i). 100 mm dia , rain water harvesting 8 making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 , rain water harvesting 9 constructing soak pit 1.20x1.20x1.20 m filled with brickbats including s.w. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 , tubewell 1 boring/drilling bore well of required dia for casing/ strainer pipe, bysuitable method prescribed in is:2800(part i ), including collecting sample from different strata , preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , tubewell 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing (cm) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , tubewell 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing (cm) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100mm nominal size dia , tubewell 4 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen(rms) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100 mm nominal size dia , tubewell 5 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , tubewell 6 providing and fixing bail plug/ bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800(part i). 100 mm dia , submersible pump 35m deep boring with casing and pipe. supply of pipe etc supplying & installation of suitable 2hp submersible pump b.s or k.s.bor equivalent make with finolex cable 1x3x2.5 squmm(upto 50mtr) withflexible conduit 25mm dia, electrical out door pannel with required electrical fitting such as mcb of 0 25amp (havell or indocopp or mds make), volt & ampere meter (ae make), single phase preventer (minilac or vsp 1 make) starter (l&t or bch make) etc of approved make, 40mm hdpe pipe (25 mtr) and all accessories complete as per requirement of site. , water purifier and cooler 1 fitting and fixing single faucet storage type water cooler ( size 461 mm wide x 582 mm deep x 1217 mm height, weight 46 kg) fully stainless body having storage capacity of 40 ltrs, cooling capacity of 40 ltrs./hr. with hermetic type compressor, gas cooled motor equipped with over load protector, condensor for propeller type, thermostat autometically controlled temperature, refrigerent r 22, 230 volt, single phase 50 hertz, maximum current 2.3 amp including plug top and electrical lead wire connection upto 3 metres from the cooler, water inlet and drain out connections complete in all respects of voltas model no 40/40 tushar pss type or similar type of approved make. , water purifier and cooler 2 fitting and fixing water purifier for drinking purpose of capacity 6 litres/min, 5 purification system with reverse osmosis system with ultra ventilated membrane, tds500 to 2000 mgl/ppm, auto shut off with microswitch float manual flush facility, tds reduction 90% having automatic backwash system with filteration unit along with all accessories including plug top and electrical lead wire connection upto 3 metres from the purifier, water inlet and drain out connections complete in all respects similar to aquaguard or similar approved make (model aquasure elegant ro water purifier of size width 360 mm x height 430 mm x depth 235 mm and weight 8.5 kg). , fire extinguisher 1 providing and fixing carbon di oxide type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. capacity 4.5 kg. , fire extinguisher 2 providing and fixing abc powder type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.capacity 6.0 kg. , electrical 1 wiring for light point/ fan point/ exhaust fan point/ call bellpoint with 1.5 sq.mm frls pvc insulated copper conductorsingle core cable in surface / recessed steel conduit, withmodular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group c , electrical 2 wiring for twin control light point with 1.5 sq.mm frls pvcinsulated copper conductor single core cable in surface /recessed steel conduit, 2 way modular switch, modular plate,suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required. , electrical 3 wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm frls pvc insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm frls pvc insulatedcopper conductor single core cable etc. as required. group c , pvc conduit 1 supplying and fixing of following sizes of medium class 20mmpvc conduit along with accessories in surface/ recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 2 supplying and fixing of following sizes of medium class 32mmpvc conduit along with accessories in surface/ recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 3 supplying and fixing of following sizes of medium class 50mmpvc conduit along with accessories in surface/ recessincluding cutting the wall and making good the same incase of recessed conduit as required. , electrical 4 wiring for light/ power plug with 2x4 sq. mm frls pvcinsulated copper conductor single core cable in surface/recessed steel conduit alongwith 1 no. 4 sq. mm frls pvcinsulated copper conductor single core cable for loop earthingas required. , wiring frls pvc insulated copper conductor 1 2 x 2.5 sq. mm. + 1 x 2.5 sq. mm. earth wire , wiring frls pvc insulated copper conductor 2 2 x 4 sq.mm. + 1 x 4 sq.mm. earth wire , wiring frls pvc insulated copper conductor 3 2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire , wiring frls pvc insulated copper conductor 4 4 x 6 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 5 4 x 10 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 6 4 x 16 sq. mm + 2 x 16 sq. mm earth wire , s/f, gi box along with modular base & cover plate 1 1 or 2 module (75mm x 75mm) , s/f, gi box along with modular base & cover plate 2 3 module (100mm x 75mm) , s/f, gi box along with modular base & cover plate 3 4 module (125mmx75mm) , s/f, gi box along with modular base & cover plate 4 6 module (200mm x 75mm) , s/f, gi box along with modular base & cover plate 5 12 module (200mmx150mm) , s/f modular switch/ socket on the existing modular plate 1 5/6 amps switch , s/f modular switch/ socket on the existing modular plate 2 15/16 amp switch , s/f modular switch/ socket on the existing modular plate 3 3 pin 5/6 amp socket outlet , s/f modular switch/ socket on the existing modular plate 4 6 pin 15/16 amp socket outlet , s/f modular switch/ socket on the existing modular plate 5 telephone socket outlet , s/f modular switch/ socket on the existing modular plate 6 tv antenna socket outlet , s/f modular switch/ socket on the existing modular plate 7 bell push , fan regulator on the existing modular plate switch box supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. , call bell/ buzze supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. , electrical 5 supplying & fixing suitable size gi box wih modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, “c” curve including connections, painting etc. as required. (for ac/ geyser) , electrical 6 supplying and drawing co axial tv cable rg 6 grade, 0.7 mm solid copper conductor pe insulated, shielded with fine tinned copper braid and protected with pvc sheath in the existing surface/ recessed steel/ pvc conduit as required. , electrical 7 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. , electrical 8 providing and fixing m.s. fan clamp type i or ii of 16 mm dia m.s. bar, bent to shape with hooked ends in r.c.c. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as required. , electrical 9 providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. clamp shall be made of 12 mm dia m.s. bar bent to shape as per standard drawing. , 40a fp isolator supplying and fixing following rating, four pole, 415 v, isolator in the existing mcb db complete with connections, testing andcommissioning etc. as required. , electrical 10 supplying and fixing 20 a, 240 v, spn industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 a c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. , electrical 11 supplying and fixing 20 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 12 supplying and fixing 30 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 17 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator)8 way (4 + 24), double door , electrical 18 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer ) as required . (note : vertical type mcb tpdb is normally usedwhere 3 phase outlets are required.)4 way (4 + 12), double door , electrical 19 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer ) as required . (note : vertical type mcb tpdb is normally usedwhere 3 phase outlets are required.)8 way (4 + 24), double door , electrical 20 supplying and fixing cable end box (loose wire box) suitable for following triple pole and neutral, sheet steel, mcb distribution board, 415 volts, on surface/ recess, complete with testing and commissioning etc.as required. for 8 way, double door fp mcbdb , electrical 21 supplying and fixing cable end box (loose wire box) suitable for triple pole and neutral, sheet steel, vertical mcb distribution board, 415 v, on surface/ recess, complete with testing and commissioning etc. as required. , 25 a, rccb supplying and fixing following rating, double pole, (single phase and neutral), 240 v, residual current circuit breaker (rccb), having a sensitivity current 30 ma in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40 a, rccb supplying and fixing following rating, double pole, (single phase and neutral), 240 v, residual current circuit breaker (rccb), having a sensitivity current 30 ma in the existing mcb db complete with connections, testing and commissioning etc. as required. , single pole mcb supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , triple pole mcb supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a tp mcb supplying and fixing 40 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 40a tp mcb , 40a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 40a fp mcb , 63a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 100a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , l/f pvc sheathed / xlpe power cable in trench 1 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 95 sq. mm and upto 185 sq. mm , l/f pvc sheathed / xlpe power cable in trench 2 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm , l/f pvc sheathed / xlpe power cable over cable tray above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm ms flat clamp) , s/m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 1 3.5c x 185 sqmm, aluminium conductor cable a2xfy , s/m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 2 3.5c x 150 sqmm, aluminium conductor cable a2xfy , s/m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3 4c x 35 sqmm aluminium conductor cable a2xfy , cable tray 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 100 mm width x 50 mm depth x 1.6 mm thickness , cable tray 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 300 mm width x 50 mm depth x 1.6 mm thickness , cable tray 3 supplying and installing following size of perforated hot dipped galvanised iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 600 mm width x 62.5 mm depth x 2.0 mm thickness , cable tray “bends” 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.100 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.300 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 3 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.600 mm width x 62.5 mm depth x 2.0 mm thickness , mv cable 1 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring (round (w) or flat (f) as mentioned) and with all components as mentioned , specifications, complete as required.3.5c x 185 sqmm, aluminium conductor cable a2xfy , mv cable 2 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring (round (w) or flat (f) as mentioned) and with all components as mentioned , specifications, complete as required.3.5c x 150 sqmm, aluminium conductor cable a2xfy , mv cable 3 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring (round (w) or flat (f) as mentioned) and with all components as mentioned , specifications, complete as required. 4c x 35 sqmm aluminium conductor cable a2xfy , earthing 1 earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. , earthing 2 earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. , earthing 3 earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. , earthing 4 providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. , earthing 5 providing and fixing 25 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required. , earthing 6 providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required. , earthing 7 providing and fixing 25 mm x 5 mm g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut, bolt, spring, washer excavation and re filling etc. as required. , earthing 8 providing and fixing 25 mm x 5 mm copper strip in 40 mm dia g.i. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re filling etc. as required. , earthing 9 providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for connections etc. as required. , earthing 10 providing and fixing earth bus of 50 mm x 5 mm gi strip on surface for connections etc. as required. , fiting & fixtures 1 supply and installation of regular/standard model a.c. ceiling fan of 1400 mm sweep including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm fr pvc insulated copper conductor etc as required. , fiting & fixtures 2 supplying and fixing single wall mounted 18/22 watt led type batten fitting complete with electronic driver and led tube etc directly on wall/ ceiling includingconnections with 1.5 sq.mm fr pvc insulated copper conductor and earthing the body etc. as required. , fiting & fixtures 3 supply installation and comissioning ofintegrated batten made (2ft) of ultra slim co extruded polycarbonate channel with housing part in white finish & diffuser part in reeded opal finish.white finish abs end caps with decorative circular coloured polycarbonate cap snap fitted on the end cap to enhance the aesthetic of the fixture. these end caps are snap fitted to the fixture.high efficiency long life led with lumen efficacy of 130 lm/w with viewing angle of 120º.powered by an integral isolated low thd electronic led driver ( smps based constant current supply) with output short circuit protection, surge protection.can be fixed directly into the wall/ ceiling , fiting & fixtures 4 supplying and fixing recess mounted 12 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 5 supplying and fixing recess mounted 18 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 6 supply, installation, testing and commissioning of 400 mm sweep, 65w,blade material aluminium blades ,speed & oscillation 3 speed, pull cord for speed and oscillation.air delivery minimum 72 m³/min,speed minimun 1350 revolution per minute.suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. , fiting & fixtures 7 supply installation and comissioning of 28w 2x2 panel recess mounting luminaire with high performance leds, suitable for mounting with armstrong/grid ceiling.crca powder coated white after phosphochromate treatment.high efficiency long life led package in integral module with lumen efficacy of >100 lm/w and viewing angle of 120° to ensure better uniformity.powered by an independent isolated, selv output electronic led driver (smps based constant current supply) with output short circuit protection, surge protection & other reliability test. , fiting & fixtures 8 supplying installation testing & commissioning ofb22 based 9w led 3 star bulb with 850 lumen, 6k color temperature including holder. , fiting & fixtures 9 supplying installation testing & commissioning of black painted extruded aluminium housing. green / red led’s mounted inside the housing. laser engraved signage matter on single / double acrylic sheet fixed on one side suitable for wall / ceiling / suspension type single / double sided display. in double sided version black paper is inserted. ni cd battery back up to 2 hrs. (charged up to 8 10 hrs).mounting strings provided for pendent mounting operating voltage 150 280v ac ambient operating temperature. – 0 to 450c ingress protection – ip42.including 3 core 1.5 sq.mm frls pvc insulated and pvc sheathed copper conductor cable and earthing etc. up to suitable point complete as required.220208 besl 03 led ssd wbb green 240 3 8wor220209 besl 03 led ssd wbb red 240 3 8wor220210 besl 03 led dsd wbb green 240 3 8wor220211 besl 03 led dsd wbb red 240 3 8w , fiting & fixtures 10 supply, installation, testing and commissioning of 600 mm sweep, bee 5 star rated, ceiling fan with brush less direct current (bldc) motor, class of insulation: b, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, service value (cmm/w) minimum 6.85, air delivery minimum 135cmm, 350 rpm (tolerance as per is : 374 2019), thd less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree c (max.), insulation resistance more than 2 mega ohm, suitable for 230 v, 50 hz, single phase ac supply, earthing etc. complete as required. , civil & misc works1 providing and fixing m.v. danger notice plate of 200 mm x 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works2 providing and fixing h.t. danger notice plate of 250 mm x 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. , civil & misc works3 supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) of size 60 cm x 60 cm at the bottom and 50 cm x 50 cm at the top with a thickness of 10cm including inscription duly engraved as required. , civil & misc works4 supplying and fixing cable route marker with 10 cm x 10 cm x 5 mm thick g.i. plate with inscription there on, bolted /welded to 35 mm x 35 mm x 6 mm angle iron, 60 cm long and fixing the same in ground as required. , civil & misc works5 providing & fixing in position 1000 mm wide , electrical insulating rubber mats as per is 15652:2006, 2 mm thick, suitable up to 1.1 kv , fire retardant, no effect of acids, alkalis and transformer oils, moisture proof, high tensile strengthandtexture finish / cloth impression (anti slip , marking on top) , civil & misc works6 supply & fixing shock treatment chart duly mounted on a wooden frame with 5 mm thick glass as required ( approx front area 1.20 sq metre ) , 20 kvaups supplying, installation, testing and commissioningof online double conversion fully microprocessor based ,indoor type, compact ups system of following rating with igbt based pwm technology to achieve thd < 3% and input power factor of greater than 0.95 at 50% loading,suitable for three phase ac input voltage 380 v to 440 v, 50 hz +3% / 3 % and three phase ac output voltage 415 ± 1% volts & frequency 50 ± 0.5 hz , inbuilt isolation transformer, necessary vrla batteries of suitable size having 30 minutes back up time , mounting rack including and suitable size connecting cable (for ups to battery and battery to battery), static and maintenance bypass switch, snmp card for rs232/ ethernet ip computability for operation and monitoring etc. with all components as mentioned , specifications,complete as required.note : concerning vendor needs to furnish the battery sizing calculations at the time of ga approval and battery size has to be as per the approved ga drawing. , external lighting 1 supply and erection of 4 metre height hot dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia a/f 130 mm, made of 3 mm thick sheet along with base plate of size 220 x 220 x 12 mm , small door opening for junction box mounting with mcb & connector, cement concrete of 1:3:6 including excavation, refilling and suitable size foundation bolts with template and all complete jobas required. (but without pole collar) single arm , external lighting 2 supplying and fixing 40/45 watt led type street light with die cast aluminium housing for ingress protection of ip65 and complete with all accessories etc, onpole/building including connection with fr pvc insulated copper conductor cable and earthing the body etc. as required. , transformer supplying, installation testing and commissioning of following rating, distribution transformer, suitable for 3 phase, 50hz, ac supply,dyn 11 vector group,core made of good quality crgo, windings made of double wound copper with approved danger and arc flash signages and with all components as mentioned , specifications and sld and complete as required. power rating 250 kva , 11 kv ht dp structure / ht cable 1 supplying 11kv (earthed) grade, xlpe insulated, heavy duty frls type, armoured cables suitable for 11kv, 50hz, ac system with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel flat armouring and with all components as mentioned in boq, specifications and sld, complete as required.3 core x 240 sq. mm , 11 kv ht dp structure / ht cable 2 supply, installation, testing and commissioning of 11 kv dp structure as per cei & hpseb norms & comprising of the following, but not limited to it for completion of worksfor the followingrsj pole of 9.15 mt length of size 175 x 90 mm complete with suitable m.s. base plate welded at bottombase plate 2 nos. , indoor cable end termination 2 supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, xlpe aluminium conductor cable of 11 kv grade as required. 300 sq. mm , outdoor cable end termination supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, xlpe aluminium conductor cable of 11 kv grade as required. 300 sq. mm , main lt panel main lt panel (refer sld for detail)supply, installation, testing and commissioning of indoor floor mounted/ wall mounted, ip42(indoor) and ip55(outdoor), factory built, modular, sectionalised, compartmentalized, extendable type lt cubicle panel of suitable size suitable for operation on 433/415 volts, 50 hz ac 3 phase 4 wire supply system fabricated from crca sheet steel of 2mm thick for , apfc panel apfc panel (200 kvar) outoor type (refer sld for detail) , ip based cctv system 1 sitc of 2 megapixel @ 25fps, h.265 ip bullet camera,1/2.9 cmos with 2.8~12mm varifocal lens, 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d/n, 3d dnr, roi coding, poe,onvif,ip66 etc. complete as required. , cctv 2 sitc of 2 megapixel @ 25fps, h.265 ip dome camera,1/2.9 cmos with 3.6 fixed mm 0 lux with night vision ir up to 30 mtrs.support intelligent analytics like abnormal video signal detection, video mask, heartbeat, password protection. supports digital wdr, icr, true d/n, 3d dnr, roi coding, poe,onvif,ip66 etc. complete as required. , cctv 4 sitc of 32ch 4k ivr ,h.265/h.264 • 1080p real time • 4k display • dual lan • 8x hdd • raid •web plugin free h.265/h.264 compression technology 4k display for clear monitoring up to 1080p 16ch decoding ability smart search ii smart vca event searchsupport raid 0, 1, 5 supported to prevent from recording data loss browsers supported: ie , smart functions : target count, electric fence, face detection, humaniod detection,retrograde detection, leave position detectio output, local & network backup etc. complete as required. , cctv 5 sitc of harddiskdrive8tb,24/7surveillance category only complete etc as required.etc.all complete , cctv 6 sitc of 55 led narrow bazel for monitoring for nvr server etc. all complete. , cctv 7 sitc of rj 45 outlets near the cameras etc. all complete. etc. all complete. , cctv 8 sitc of cat 6 patch cords 1 meter high quality four pair twisted stranded cable terminated with rj45 modular plugs at both the ends. , integrated it and epabx system sitcof cat 6 48 port jack panel for data as per given specification etc. all complete. , epabx system 2 sitcof cat 6 48 port jack panel for voice as per given specification etc. all complete. , epabx system 3 sitc of lszh cat 6 speed unshielded twisted pair computer cable with 23 awg solid copper conductors in existing concealed/surface conduits/raceways complete 305 mtr. roll as per specification etc. all complete. , epabx system 4 sitc of cat6 io, face plate, wall box combo2 port etc. all complete. , epabx system 5 sitcof cat 6 mounting cords 7 feet for data as per given specification etc. all complete. , epabx system 6 sitcof cat 6 patch cords 4 feet for telephone as per given specification etc. all complete. , epabx system 7 sitc of 24 port l2 managed 10/100/1000 mbps non poe switch with 4 sfp port , for data pointsrack mountable etc. all complete. , epabx system 8 sitc of 24 port l2 managed poe 10/100/1000 mbps switch with 4 sfp port , for cctv rack mountable etc. all complete. , epabx system 9 sitc of 24 port smart managed non poe with 4 sfp port rack mountable etc. all complete. , epabx system 10 sitc of 15 u mountingrack with ventilation, sliding shelves, power strips, etc. all complete. , epabx system 11 sitc of ip pbx for with 8 trunk 1 pri& 8 digital and 32 analog extension expendble upto 64 extesionsy etc all complete. , epabx system 12 25 pair riser cable , epabx system 13 mdf box25 pair with 20 pairkrone module , epabx system 14 supply, installation, testing & commissioning of analog phone with speaker , small display etc. all complete. , epabx system 15 client workstation supply, installation, testing & commissioning of client workstation as per following specifications:intel core i5 7700k, 4.2ghz, os genuine microsoft microsoft® windows 10 enterprise 64 bit, ram 16gb, memory 500 gbssd +1tb hdd 7200 rpm class graphic card in built processor graphics (gpu):intel® hd graphics 630 and geforce gtx 970 4gb pcie x 16 lp supporting 2/4 monitors., two(2) pci express expansion slots 2/4 usb, 3.0 serial, and 2 hdmi/vga adaptor, cd/dvd rom.; usb keyboard and mouse, ups, associated cables etc. and other required software to control nvr in control room including centralized video management software as per the requirement of the successful operation of the surveillance system complete as required in accordance with laid specification or upto the satisfaction of engineer in charge. , signage 1 providing & fixing of building direction signage mounted on pole, with pole of 100x100mm shs (square hollow section) of height of 5600mm, and sign size of 900x1050, sign made of aluminiu c section of 60mm with internal framing to support the frame in ms tubes hollow section, frame work duly painted with anti rust coatings, with facia of 3mm thick exterior grade aluminium composite panel, cladded with uv cured digital printed retroreflective sheet of 3m make, and back panel of 3mm exterior grade acp, all pipes to be painted in approved color. cost shall includecost towards installation, including excuvation and filling up with specified pcc and fixing of foundation bolts as specified, also it shall include the designing charges.all complete as per direction by engineer in charge. , signage 2 providing & fixing of prohibition sign silk screen printed of approved colors, on acp of exterior grade, of size 300x300mm, all fixtures in stainless steel as per design, it shall include the designing charges .all complete as per direction by engineer in charge. , signage 3 providing & fixing traffic regulatory parking signage mounted on pole, with pole of 50x50mm shs (square hollow section) of height of 300mm, and sign size of 750x750, sign made of aluminium sheet of 3 mm thickness with aluminium supported profile to the frame of ms tube hollow section, aluminium sheet to be cladded with uv printed retroreflective sheet of 3m make frame work duly painted with anti rust coatings., all pipe to be painted in apppproved color. cost shall include cost towards installation, including excuvation and filling up with specified pcc and fixing of foundation bolts as specified, also it shall include the designing charges.all complete as per direction by engineer in charge. , signage 4 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge , wall projected 250x210mm, both sides , signage 5 providing and fixing of signages modular curved frame technology of various widths and lengths to fometre suggested usages made of aluminium extruded sections. duly anodised all signages shall be provided with 0.6 0.8mm polycarbonate protecting film over the prints of appropriate size .all complete as per direction by engineer in charge, door mounted, 300x80mm , 2 tr air conditioning 1 split ac (inverter model): supply, installation, testing, commissioning of split type wall mounted air conditioning units of following capacity including inddor, outdoor unit fitted with inverter based rotary compressor fitted with rotary compressor, copper condensor and first charge refrigent r410a/ eco friendly green gas only, all complete including all electrical connections to the electrical power supply system of the building, includingbut not limited to supply of all electrical plugs, etc.,as necessary,lengthening of all electrical wires of ac units ( both indoor and outdoor), drain pipe andincluding suitable voltage stabilisers, etc. so as to place them in a concealed manner in the desired position. the copper pipes and electrical cables shall be concealed in approved manner and neatly run in straight lines in a workman like manner with proper supports. complete supply and installation of split2 tr star rating 3 star , refrigerant piping 1 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work (19mm / 13 mm thick) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 25 mm od, wall thickness >= 1.2 mm (insulation 19 mm thick) , refrigerant piping 2 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work (19mm / 13 mm thick) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 19.1 mm od, wall thickness >= 1.0 mm (insulation 13 mm thick) , refrigerant piping 3 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work (19mm / 13 mm thick) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 15.9 mm od, wall thickness >= 0.8 mm (insulation 13 mm thick) , refrigerant piping 4 copper piping: supply, installation, providing, testing and commisioning of interconnectiong copper refrigent pipe work (19mm / 13 mm thick) duly insulated with elastomeric nitrile rubber, joints shall be covered with nitrile tape of 3mm thick complete as per specification soft refrigerant copper piping as per specifications and drawings. 9.5 mm od, wall thickness >= 0.8 mm (insulation 13 mm thick) , drain piping 1 providing and fixing of cpvc 6 kg/cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 20 mm , drain piping 2 providing and fixing of cpvc 6 kg/cm2 drainpiping complete with fittings, supports, 6 mm thick closed cell elastomeric insulation as per specifications and drawings. 32 mm , main oxygen manifold supply, installation, testing and commissioning of following gas manifold system (excluding cylinders). the manifold is configured for designed numbers of cylinders and is suitable to withstand a pressure of 145 kg/cm2, along withhigh pressure copper annealed tail pipes with end brass adapter suitable for cylinders and manifold. top frame comprising of high pressure copper pipes of size 1/2” nb x 15swg with high pressure brass fittings made of high tensile brass and connections through nonreturn valves, the design of middle and bottomframes is provided to fit both round and flat bottom cylinders safely. the manifold is tested (hydraulically) at 3500 psig. (it should be ce and iso 13485 certified) mani fold oxygen manifold 4 + 4 cylinder banks complete with nrv, middle frame, bottom frame with ce marked, , emergency manifold emergency oxygen manifold 01 + 01 cylinder emergency manifold with complete regulator, nrv, middle frame & bottom frame, , control panelfor oxygen fully automatic three port control panel for oxygen supply, installation, testing and commissioning of automatic manifold control panel would provide a duty or standby gas supply from two cylinder banks with automaticchangeover the manifold indicates local status and has a remote indicator facility. automaticmanifold control panel would be designed to supply the mgps with a constant pressure supply via a control panel form two equal banks of cylinders and the changeover from the , emergency manifold line regulator emergency manifold line regulator supply, installation, testing and commissioning of emergency manifold line regulator i n p u t p r e s s u r e 1 5 0 k g / c m 2 working pressure 4 kg/cm2 it should be ce and iso 13485 certified.oxygen input pressure 150 kg/cm2 working pressure 4 kg/cm2capacity : 1500 lpm , cylinderconnectingpipe (pig tail) supply, installation, testing and commissioning of cylinder connecting pipe (pig tail) made up of flexible ss hose with safety cord 5/8 inch bsp gland nut and one side 1/2 inch bsp internal threads having one meter length.(oxygen 24 , n2o 10,co2 4) , backpressurecompensated[bpc]oxygen flowmeter supply, installation, testing and commissioning of back pressure compensated [bpc] oxygen flow meter body should be made of brass material dully chrome plated and graduated from 0 15 l/m on an expanded lower scale forprecision setting at low flow and 5 15 l/m for general use. the humidifier bottle should be made up of unbreakable polycarbonate/ polysulphone material and autoclavable at 121 degree centigrade temperature. it should be ceand iso 13485 certified. , oxygen gas outletfront loadeddin /bsstd gas outlet front loaded din /bs std:supply, installation, testing and commissioning of din/british standard gas outlets are for use with medical gas system. the gas outlets completely complywith htm2002 and c11 standard regulations and pass the test of leakage and connector stability. medical gas outlet shall be gas specific for the services indicated and accept only corresponding din/british standard quickconnect adapter. specifically, gas specific indexed to eliminate interchangeability of gas services. the gas outlet is offered in consoletype, wall type with box and hose barb type gas system. it should be ce and iso 13485certified. din/bis std. gas outlets feature and benefits:* comply with htm2002 and c11 standardregulations* color coded according to iso32 color*100% pressure and leak tested* full range of mounting options* available in wall type with box, console typeand hose barb type* gas specific adapters , quickconnectadapter din/british standard quick connect oxygen adapter(safety probe) , tube oxygen h.p. rubber tube white color, , alarm supply, installation, testing and commissioningof area pressure alarm panel would be witdigital display, closed circuit, self monitoringtype. the alarm would be designed to monitorthe line pressure in piping systems.it should be ce and iso 13485 certified. withfour digit notified no. area line pressure alarm 1 gases , isolation valve, supply, installation, testing and commissioning of the ball valves [for dividing the pipelines into various zones for the case of maintenance] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [either fully open or fully closed]. it should be ce and iso 13485 certified.42mm , isolation valve 2 supply, installation, testing and commissioning of the ball valves [for dividing the pipelines into various zones for the case of maintenance] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [either fully open or fully closed]. it should be ce and iso 13485 certified 28mm , isolation valve 3 supply, installation, testing and commissioning of the ball valves [for dividing the pipelines into various zones for the case of maintenance] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [either fully open or fully closed]. it should be ce and iso 13485 certified 22mm , isolation valve 4 supply, installation, testing and commissioning of the ball valves [for dividing the pipelines into various zones for the case of maintenance] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [either fully open or fully closed]. it should be ce and iso 13485 certified 15mm , isolation valve 5 supply, installation, testing and commissioning of the ball valves [for dividing the pipelines into various zones for the case of maintenance] the internal ball with full borne is made of stainless steel with teflon seats. these valves are leakproof and needs only quarter turn for its operation [either fully open or fully closed]. it should be ce and iso 13485 certified 12mm , pipeline 1 medical grade copper pipeline (in mtrs.) as per en 13348,12 mm (od) x 0.7 mm thickness , pipeline 2 medical grade copper pipeline (in mtrs.) as per en 13348,15 mm (od) x 0.9 mm thickness , pipeline 3 medical grade copper pipeline (in mtrs.) as per en 13348,22 mm (od) x 0.9 mm thickness , pipeline 4 medical grade copper pipeline (in mtrs.) as per en 13348,28 mm (od) x 0.9 mm thickness , pipeline 5 medical grade copper pipeline (in mtrs.) as per en 13348,42 mm (od) x 1.2 mm thickness , hospital sheet patient bedtype iii with mattress overall sizes: (l)2268 mm x ( w)922 mm x (h) 610 mmdescription: sheet bed should be a plain bed used in the recovery ward.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crca , paediatric bed with mattress paediatric bed of overall sizes in mm: 1500 (l) x 850 (w) x 1210 (h)flat single section bed with grille frame on 4 sides.suitable for children up to 12 years.drop down grill frame on both sides for protection of the patient.material specifications: under structure has a higher diameter tubewhich should provide a sturdy understructure.lying surface area of crcafinish specifications: head board/leg board should be made of frame ms erw roundtube of sections ø19, ø25.4& ø31.75mm, ofthickness1.6 mmprovision for mounting of iv pole and mosquito net pole should be presentfinish specifications: powder coating should be bacteriostatic and thermosetting epoxy polyester, formulated to fulfill the requirements for bacterial protection.all powder coated parts in ral white , bed side locker type i over all dimension :402mmlx422mm wx840mm ht .locker should have one cabinet and one drawer unit .both provided with cam lock .there should be gap between drawer and unit to keep general items for frequesnt use castors are provided for easy handling .drawer made up of crca sheet 1 mm thick and has ball slide for easy operation .top ss 304 sheet 0.8 mm thick castors 50 mmdia ,hamdle abs ..powder coating of epoxy polyester , medicinetrolleytype i overall size902mm(l)x532mm(w)x915mm(h).top shelf should be made of ss 304 sheetof 1 mm thick. supporting legs made of ss304 tubesection 30.30 mm dia.of 1.2 mm thick provided to suppoort the entire structure.ss 304 tube provided at the bottom for placement of instument being used .handle made up of ss 304 tubeof dia dia 16 mmand thickness 1.2 mm provided to handle trolley .and maneuver accordingly. high endurance anti static plastic injection moulded castors of 125 mm dia.ss should be finished in glossy mirror finish. max load capacity of 10 kg/shelf udl , round stooltype i overall sizes diagonal legdia 538 mmh470 min 655max.ss 202 made sheet with spin section of thickness 1mm & should be non corrosive. it should have a diameter of 305mm,seat base is made of ms ring and rectangular tube.en8 screw having dia of 22 mm should be used for height adjustment of the seat base.the hub should be made of ms erw tube having dia of 38mm and thickness 2 mm.the hub should be welded with the legs and it should accommodate and cover the lead screw mechanism.the understructure should consist of 4 legs made up ofms erw tube of diameter 25.4 mm and 1.6mm thick. the press formed pipe leg should give a round & clean look. all the legs should be provided with 4 nos of nylon 6 bush.all metal componentsshould be pre treated with zinc phosphating in 9 tank process and then powder coated with anti microbialepoxy polyster powder coating . all welding should be co2 argon welding to minimise rusting on the welding areas.safe working load must be 135kg , strecher on trolley type i 2005mm(l)x666mm(w)x827mm(h).the trolley should be made of 31.75 and 25.4 mm dia 1.6 mm thick erw tube.holder for stretcher should be made up of mild steel.castor should be of 200 mm dia , diagonal locking castor.stretcher should be made up oferw tubeof dia 25.4 mm and thickness 1.6 mm.top sheet should be made of crca sheetof thickness 1.2 mm with contour shape to accommodate patient.iv pole holder should be made ofms .maximum safe work load should be 135 kg.to ensure qood quality welding co2 argonprocess should be adhered to.all metal componentsshould be pre treated with zinc phosphating in 9 tank porcess and then powder coated with anti microbialepoxy polyster powder coating.goods should be supplied in knocked down construction to reduce carbon emission. performance test :proof loading test , cycle tests , impact test, salt spray test, castor break test,the manufacturer should compilant with iso 9001, 14001, 13485, ohsas 1800 and ce certification. , doctor desk type x s/f/f executive table main desk should be of dimesion : 1350w x 750d x 750h.the table top should bein white cedar, side panelsin black, while the modestypanel ina combination of black & white cedar. side panels : (black) made form 18mm thick plt with pvc lipping.modesty panel : made form 18mm thick plt with pvc lipping. bigger upper panel in black and smaller lower panel in white cedar. made from 18mm thick plt with pvc lipping. mobile pedestal : one box and one filing drawer with 18mm thick plb fronts and top. handles : black powder coated die cast aluminum alloy handles. mobile pedestal and hdu are fitted with central lock. , chair type iii s/f/f executive chair1) seat/back assembly: the seat and back are made up of 1.2 cm. thick hot pressed plywood, upholstered withfabric upholstery covers and moulded polyurethane foam. the back foam is designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area.high back size : 47.5 cm (w) x 69.5 cm (h)seat size : 47.0 cm. (w) x 48.0 cm. (d) 2) polyurethane foam: the polyurethane foam is moulded with density = 45 +/ 2 kg/m 3and hardness = 20 +/ 2at 25% compression. 3) armrests: the one piece armrests are injection moulded from black co polymer polypropylene. 4) center tilt synchro mechanism : the mechanism is designed with the following features:· 360 revolving type. · upright position locking. · tilt tension adjustment.· seat/back tilting ratio of 1:3 (60 seat tilt/180 back tilt). 5) pneumatic height adjustment : the pneumatic height adjustment has anadjustment stroke of 12.0 cm. 6) telescopic bellow assembly : the bellow is 3 piece telescopic type and injection moulded in black polypropylene. 7) pedestal assembly : the pedestal is injection moulded in black 30% glass filled nylonand fitted with 5 nos. twin wheel castors. the pedestal is 66.0cm pitch center dia. (76.0 cm with castors.) 8) twin wheel castors : the twin wheel castors are injection moulded in black nylon. , staff chair type i chair of over all size: 58.0cm (w) x 56.5cm (d) x 87.5cm (h) & 48.0cm (sh)seat/back assembly: the seat and back are made from chemically treated and seasoned wood, upholstered with plywood, black leather cloth, and u foam.*back size: 46.0cm (w) x 27.0cm (h).*seat size: 46.0cm (w) x 40.0cm (d).armrest tube: the armrest tube is made of m.s. e.r.w. tube dia. 2.54cm. (1”) x 16bg thick and powder coated.armrest: the armrest is gas assisted injection moulded from black polypropylene.understructure assembly: the understructure assembly is a cantilever type frame made of dia. 2.54cm. (1”) x 14bg. thick m.s. e.r.w. tube and powder coated. , visiter chair type v s/f/f visitor chair1) seat/back assembly: the seat and back are made up of 1.2 cm. thick hot pressed plywood, upholstered with fabric upholstery covers and moulded polyurethane foam. the back foam is designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal area. mid back size : 47.5 cm. (w) x 58.0cm. (h)seat size : 47.0 cm. (w) x 48.0 cm. (d) 2) polyurethane foam: the polyurethane foam is moulded with density = 45 +/ 2 kg/m 3and hardness = 20 +/ 2at 25% compression. 3) armrests: the one piece armrests are injection moulded from black co polymer polypropylene. 4) tubular frame : the powder coated tubular frame is cantilever type & made of dia 25.4mm x 2mm thk m.s. er.w. tube. , wheel chair type i (l) 790 x (w) 600 x (h) 870mm.foldable frame structure should be made of section 22diax1.2mm a3 carbon steel with chrome finish. cross bar should be made of a3 carbon steel with section 25.4 x 1.2mm.rear wheel:24 inch solid mag wheels with alloy in the rim .integrated handrim provide to drive the wheel chair of section 16x1.2mm a3 carbon steel with chrome finish.front wheel :8 inch hub made of pa polymer and outer with solid rubber.pu molded arm rest & base should be made of abs for better arm support .leatherite strap for calf rest & leatherite cushion for seat.adjustable alluminimum die cast foot rest with updown & swivel type mechanism.handles should be made of moulded rubber grip to push the wheelchair.hand brakes should be provided to lock the wheelchair at desired location.foot pressextended base with molded plastic for better grip.anti rust chrome finsh. safe work load of100 kg , basin stand type i ht 850 mm ss bowl ms tubular frame of dia 25.4 x1.2 mm tube work mounted on three 50 dia.non rusting castors all without brack. ss part finished with matt polish , kick buckettype i overa all dimension of the bucket should be 517 mm (l) x 517 mm ( w) x 210 mm h.it should made of 12.7 mm dia and 1.6 mm thick ss 304 ring. the bowl should be ss made of .8 mm thck .3 nos 50 mm diahigh endurance plasticinjection moulded castors should be provided for the movement.mx load bearing capacity should be 10 kg. , instrument cabinet type i overall dimensions of 900mmwx 1990mmhx450mmd and should have transparent doors and sides with steel frame work. transparent portion of this cupboard should be made of acrylic of 4mm thick. this cabinet should have 5 adjustable acrylic shelves each of 6 mm thickness. three way lock should be provided of 6 levers. in the front door there should be 4 acrylic sheets and 2 each on both the sides. metal used should be of crca and powder coated for finish. to be provided with rubber shoes to prevent direct contact of cabinet and floor. , hospital curtain tracks & i.v. tree system supply installation testing & commissioning of cubical tracks system made of powder coated aluminium alloy,stain free polyster fabric ,water repellent curtains ,smooth movement ,non sticking runnner with stainless steel hooks made from mirror finish stainless steel ,adjustable height with all accessories. total quantity : 1...
29776863 bids are invited for pile boring, providing and installation bored cast in situ reinforced cement concrete piles of grade m 25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using direct mud circulation (dmc) or bailer and chisel technique by tripod and mechanical winch machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap).450mm dia piles (inclusive of carriage) , pcc providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering all work up to plinthlevel : 1:3:6 (1 cement : 3 coarse sand (zone iii) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) (inclusive of carriage) , rcc providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland /portland slag cement, admixtures in recommended proportion as per is: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer in charge; for the following grades of concrete. note: extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re design the mix or bear the cost of extra cement. (inclusive of carriage) , brick work brick work with bricks of class designation 100a in foundations and plinthin :cement mortar 1:4 (1 cement : 4 coarse sand) (inclusive of carriage) , sand filing supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.(inclusive of carriage) with lead upto 3 km , shuttering centering and shuttering including strutting, propping etc. and removal of form for foundations, footings, bases of columns, etc. for mass concrete , reinforment steel steel reinforcement for r.c.c. work ready to use cut and bend rebars of approved make from factory/workshop to construction site including placing in position and binding all complete thermo mechanically treated bars of grade fe 500d or more. , plinth protection making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone iii) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. , door & window providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer in charge. (glazing, paneling and dash fasteners to be paid for separately) :powder coated aluminium (minimum thickness of powder coating 50 micron) , glass providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . (cost of aluminium snap beading shall be paid in basic item):with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) , upvc door providing and fixing of factory made upvc white colour casement door, upvc multichambered extruted frame, sash and mullion profile. frame duly reinforced with 1.2mm gi section box tpe chamber and sash with 1.5mm thick gi section (± 0.2mm) based on wind load calculations (shape and size according to upvc profiles), appropiate dimentions of upvc extruded glazing bead, epdm gasket (k/o type), seperate drainage system, ss34 grade friction hinges 2d/3d plate hinges, zinc alloy (white powder coated) casement handle, gi fastener 8x100 mm size for fixing frame to finish wall, plastic packer and caps and necessary steel screws etc.profile of frame and sash shall be metered cut and fusion welded at all corners, mullion shall be also fusion welded/joined mechanically including drilling of holes for fixing hardware and drainage of water etc. after fixing of frames , gap between frame and adjascent wall shall be filled with pu foaam / backer rod required size and the approved quantity. after that sealed with weather proof silicon sealant at both side, all complete as per approved drawing and direction of eic , door closer providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. , door providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including stainless steel butt hinges wirhnecessary screws , door stopper providing and fixing aluminium hanging floor door stopper, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. single rubber stopper , soling providing designation 100 a one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as perbuilding specification and direction of e/l, , tile 1 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm , tile 2 providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. , tile 3 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. , granite providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer in charge :flamed finish granite stone slab jet black, cherry red, elitebrown, cat eye or equivalent. , false ceiling providing and fixing mineral fibre false ceiling tiles at all heights of size 595x595mm of approved texture, design and pattern. the tiles should have humidity resistance (rh) of 99%, light reflectance ? 85%, thermal conductivity k = 0.052 0.057 w/m k, fire performance as per (bs 476 pt 6 &7)in true horizontal level suspended on interlocking t grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main t runners of 15x32 mm of length 3000 mm, cross t of size 15x32mm of length 1200 mm and secondary intermediate cross t of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mmwith 16 mm thick beveled tegular mineral fibre antimicrobial false ceiling tile confirming to iso 5 (class 100) specifications , pre fabsteel designing, providing, installing and fixing factory finished custom designed cold form light gauge steel framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. the steel sheet shall be galvanized (az 150gms aluminium zinc alloy coated steel having minimum yield strength 300 550 mpa) conforming to aisi specifications and ibc 2009 for cold formed steel framing and construction and also as per is: 875 1987, iso 800 1984 and is:801 1975. the wind load shall be as per provisions of is 875 (part iii). lgsfs frame shall be designed as per is: 801 using commercially available software such as frame cad pro 11.7/ staad pro v8i/ architekv2.5.16/ revit architecture 2011 or equivalent. proper usage of connection accessories like heavy duty tension ties, light duty hold ons, twist straps (to connect truss with wall frames), strong tie, tie rod, h brackets, boxing sections, l shaped angles for better structural stability. the framing section shall be cold form c type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple/ slot at required locations as per approved drawings. , pre fabwall providing and fixing of external wall system on light gauge steel frame work with outer face cement boards as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c/c of approved make. , pre fabin. wall providing and fixing internal wall panels on light gauge steel frame work with 12.5mm thick gypsum plaster board conforming is 2095:2011 fixed on cement board as per standard sizes fixed with self drilling / taping screws / fasteners @ 60cm c/c of approved make, screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length varying from 25 to 45 mm. proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately , roof sheet supply & installation of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer in charge) 0.50 mm +/ 5% total coated thickness (tct) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by engineer in charge. the sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with epdm seal or with polymer coated j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead complete upto any pitch in horizontal/vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. , ridge plain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/ 5% total coated thickness (tct) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling/ self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : ridges plain (500 600mm). , gutter drain providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/ 5% total coated thickness (tct) thick zinc coating 120gsm as per is: 277 in 240mpa steel grade, 5 7 microns epoxy primer on both side of the sheet and polyester top coat 15 18 microns using self drilling/ self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumen washers complete : gutter , flashing providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 5% total coated thickness (tct), zinc coating 120gsm as per is: 277 in 240mpasteel grade, 5 7 microns epoxy primer on both side of the sheet and polyester topcoat 15 18 microns using self drilling/ self tapping screws or with polymer coated j or l hooks, bolts and nuts and or g.i. seam bolts and nuts, g.i. plain and bitumenwashers complete :flashings/ aprons. (upto 600 mm) , under deck insulation providing and fixing thermal insulation of ceiling (under deck insulation) with resin bonded rockwool conforming to is: 8183,density 48 kg/ m3, 50 mm thick, wrapped in 200 g virgin polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. , resin bonded rock wool providing and fixing thermal insulation with resin bonded rock wool conforming to is: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 g virgin polythene bags fixed to wall with screw, rawel plug & washers and held and in position by criss cossing gi wire etc. complete as per directions of engineerin charge. , face panel providing and fixing in all exterior face panels breathable vapour barrier underneath the cementfiber board as per national building code 2009 complete as per direction of engineer in charge. , lap siding supplying and installation of moisture resistant/fire resistantlap siding 8 mm thick and width as per standard sizes made ofiber cement board with embossed decorative finish to give pleasing exterior fixed horizontally with staggered joints including minimum over lapof 32 mm external cement fibre boardconforming to is 14862:2000 offixed with self drilling / taping screws/fastners of approved make. , putty providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. , distemper distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1 new work (two or more coats) over and including water tinnable priming coat with cement primer , ex. paint finishing walls with textured exterior paint of required shade : new work (two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm sqm , oil paint painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work . , steel 2 steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. hot finished welded type tubes , excavation earth work in excavation over areas ( exceeding 30 cm in depth. 1.5 m in width as well es 10 sqm on plan) including disposal of excavated earth , lead upto 50 m and lift upto 1.5 m; disposed earth to be levelled and neatly dressed. , road providing and laying c.c. pavement of mix m 25 with ready mixed concrete from batching plant. the ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc.complete as per specifications and directions of engineer in charge. (the panel shuttering work shall be paid for separately). (note: cement content considered in this item is @ 330 kg/cum. excess/less cement used as per design mix is payable/ recoverableseparately). , paver block providing and laying 60 mm thick factory made cement concrete interlocking paver block of m 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thickcompacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer in charge. , phe 1 providing and fixing salem stainless steel a isi 304 (18/8) kitchen sink as per is: 13983 with ci brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.kitchen sink with drain board 510x1040mm bowl depth 200mm. , phe 2 providing and fixing salem stainless steel a isi 304 (18/8) kitchen sink as per is: 13983 with ci brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.sink without drain board 610x510 mm bowl depth 200mm. , phe 3 providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing:rectangular shape 453x357 mm , phe 4 providing and fixing toilet paper holder:c.p. brass , phe 5 providing and fixing water closet squatting pan (indian type w.c.pan) with 100 mm sand cast iron p or s trap, 10 litre low fixturescomplete, including cutting and making good the walls andlevel whitep.v.c. flushing cistern, including flush pipe, with manually controlleddevice (handle lever) conforming to is : 7231, with all fittings andfloors wherever required :white vitreous china orissa pattern w.c. pan of size580x440 mm with integral type foot rests , phe 6 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : w.c. pan with isi marked white solid plastic seat and lid , phe 7 providing and fixing 8 mm dia c.p. / s.s. jet with flexible tube upto 1 metre long with s.s. triangular plate to eureopean type w.c. of quality and make as approved by engineer in charge , phe 8 providing and fixing cp brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge..(sink & urinal) , phe 9 providing & fixingptmt towel ring trapezoidal shape 215 mm long 200 mm wide with minimum distance of 37 mm from wall face with concealedfittings arrangement of approved quality and colour weighing not less than 88 gms , phe 10 providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms.15mm nominal bore , phe 11 providing and fixing c.p. brass bib cock of approved quality confirming to is:893115mm nominal bore , phe 12 providing and fixing c.p.brass angle valve for basin mixer and geyser points of approved quality conforming to is 8931 a) 15 mm nominal bore.15 mm nominal bore , phe 13 providing and fixing wash bashin with c.i. brackets, 15mm dia cp brass singal hole basin mixer of approved quility and make, including painting of fittings and brackets, cutting and making good the walls wherever required white vitreous china surgeon type wash basin of size660x460 mm with a pair of 15 mm c.p. brass pillar tapswith elbow operated levers , phe 14 providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology. , phe 15 providing and fixing white vitreous china laboratory sink with c.i. brackets, c.p. brass chain with rubber plug, 40 mm c.p brass waste and 40mm c.p. brass trap with necessary c.p. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :size 600x450x200 mm , phe 16 providing and fixing cp brass single lever telephonic wall mixer of quality & make as approved by engineer in charge . a) 15 mm nominal dia. , phe 17 providing and fixing cp brass shower rose with 15 or 20 mm inlet100 mm diameter , phe 18 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. , phe 19 providing and fixing ptmt liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. , phe 20 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. (internal work) 40 mm dia, nominal bore , phe 21 providing and fixing g.i. pipes complete with gi fittings and clamps including cutting and making good the walls etc. (internal work)50 mm dia, nominal bore , phe 22 two or more coats on new work over an under coat ofsuitable shade with ordinary paint of approved brand andmanufacturetwo more coast on new work , phe 23 p/f m.s. cap 100 mm dia , phe 24 providing and fixing, upvcpipes 6 kg/cm2(is: 4985) including all fittings (plain or door) e.g. bends, junction, offsets, access pieces, jointing with rubber ring/solvent cement joints includingrequired suports,cutting chase or holes in walls and floors and making good where required.75 mm dia pipe , phe 25 providing and fixing, upvcpipes 6 kg/cm2(is: 4985) including all fittings (plain or door) e.g. bends, junction, offsets, access pieces, jointing with rubber ring/solvent cement joints includingrequired suports,cutting chase or holes in walls and floors and making good where required.110 mm dia pipe , phe 26 providing & fixing on wall face unplasticised rigid pvc rain water pipes conforming to is:13592 tyape a included jointing with seal ring conforning to is:5382 leaving 10 mm gap for thermal expansion. (i)single socketed pipes.110 mm diameter , phe 27 providing, fixing on wall face unplasticised pvc moulded fittings /accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. coupler 110 mm diameter , phe 28 providing, fixing on wall face unplasticised pvc moulded fittings /accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. bend 87.5 deg 110 mm diameter , phe 29 providing, fixing on wall face unplasticised pvc moulded fittings /accessories for unplasticised rigid pvc rain water pipes conforming to is ; 13592 type a including jointing with seal ring conforming to is ; 5382 leaving 10 mm gap for thermal expansion. shoe 110mm shoe , phe 30 providing & fixing unplasticised pvc pipe clips of approved design to unplasticised pvc rain water pipes by means of 50x50x50mm hard wood plugs, screwed with .m.s. screws of required length including cutting brick work and fixing in cement mortar 1:4(1cement : 4 coarse sand) and making good the wall etc. complete.110 mm dia , phe 31 providing and fixing cpvc pipes having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mt spacing. this includes jionting of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge. 20 mm nominal outer dia pipes , phe 32 providing and fixing of gun metal gate valve with ci wheel of approved quality (screwed ends)25mm dia, nominal bore , phe 33 providing and fixing of gun metal gate valve with ci wheel of approved quality (screwed ends) 32 mm dia, nominal bore , phe 34 providing and fixing gun metal non return valve of approved quality (pn 1.6)40 nominal bore , phe 35 providing and fixing brass stop cock of approved quality15mm nominal bore , phe 36 butterfly valve (manual) with c i body ss disc, nitrile rubber seal & o ring pn 16 pressure rating for chilled water/hot eater circulation as specified 65 nominal bore , phe 37 butterfly valve (manual) with c i body ss disc, nitrile rubber seal & o ring pn 16 pressure rating for chilled water/hot eater circulation as specified80 nominal bore , phe 38 providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete25 mm nominal bore , ex. phe 1 providing and fixing c.i. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (the tail pieces, tapers etc if required will be paid separately) :50 mm dia , ex. phe 2 providing and fixing c.i. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (the tail pieces, tapers etc if required will be paid separately) :80 mm dia , ex. phe 3 providing and fixing c.i. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (the tail pieces, tapers etc if required will be paid separately) :100 mm dia , ex. phe 4 providing & fixing c.i.sluice valve(with cap)complete with bolts,nuts,rubber insertions etc.(the tail pieces if required will be paid separately)100 mm dia.pipe , ex. phe 5 providing & fixing c.i.sluice valve(with cap)complete with bolts,nuts,rubber insertions etc.(the tail pieces if required will be paid separately)150 mm dia.pipe , ex. phe 6 providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm.clear depth and 250mm apron including cost of e/w. involved with 75mmcement concrete (1:4:8) over one brick designation 100 a flat soling inproper grade and slope at the base.the drain duly.plastered in cm. (1:3)with punning over exposed surface all complete as per buildingspecification and direction of e/l, , ex. phe 7 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil (hard or soft) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [hard/dense soil] pipes,cables etc.exceeding 80mm dia.but not exceeding 300mm dia. , ex. phe 8 excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottom depth upto 1.5 m including getting out the excavated soil (hard or soft) and then returning the soil as required in layers not exceeding 20 cms in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil as directed within a lead of 50m. [hard/dense soil] pipes,cables etc.exceeding 80mm dia. exceeding 300mm dia. , ex. phe 9 providing and laying non pressure np2 class (light duty) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. (for storm drainage)250 mm dia rcc pipe , ex. phe 10 providing and laying non pressure np2 class (light duty) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. (for storm drainage)300 mm dia rcc pipe , ex. phe 11 providing and laying non pressure np2 class (light duty) rcc pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. (for storm drainage)450 mm dia rcc pipe , ex. phe 12 inside size 120x90 cm and 90 cm deep including c.i. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 , ex. phe 13 providing and fixing square mouth sw gully trap grade ‘a’ complete ci grating brick masonry chamber with bricks of class designation 75 and water tight ci cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 13.00 kg and frame to be not less than 5 kg. as per standard design.(cover min. 4.5 kg & frame min.2.7 kg )180x150 mm size p type with fps bricks , ex. phe 14 constructing masonry chamber 30x30x50 cm,inside with 75 class designation brick work in cement mortar 1:4 (1 cement:4 coarce sand) for stop cock complete with c.i. surface box 100x100x75mm (inside) with locking arrangement and rcc top slab 1:2:4 mix (1 cement : 2 corase sand: 4 graded stonr aggregate 20mm nominal size) necessary excavation foundation concret 1:5:10 (1 cement:5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortor 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. , ex. phe 15 constructing masonry chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement: 4 coarse sand) for sluice valve, with c.i. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with channel lid and rcc top slab 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone sggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design:with f.p.s. bricks , ex. phe 16 structual steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , ex. phe 17 making connection of gi distribution branch with gi main of 50 80mm nominal bore by providing and fixing tee, including cutting and threading the pipe etc. complete. , rain water harvesting 1 boring/drilling bore well of required dia for casing/ strainer pipe, bysuitable method prescribed in is:2800(part i ), including collecting sample from different strata , preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , rain water harvesting 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing (cm) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , rain water harvesting 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen(rms) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150 mm nominal size dia , rain water harvesting 4 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 5 supplying, filling, spreading & levelling gravel of size range 5mm to 10mm, in recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 6 supplying, filling, spreading & levelling coarse sand of size range 1.5mm to 2mm, in recharge pit, in required thickness over gravel layer,for all leads & lifts, all complete as per direction of engineer in charge. , rain water harvesting 7 providing and fixing bail plug/ bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800(part i). 100 mm dia , rain water harvesting 8 making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 , rain water harvesting 9 constructing soak pit 1.20x1.20x1.20 m filled with brickbats including s.w. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 , tubewell 1 boring/drilling bore well of required dia for casing/ strainer pipe, bysuitable method prescribed in is:2800(part i ), including collecting sample from different strata , preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer in charge, upto 90m depth below ground level.300 mm dia , tubewell 2 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing (cm) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.150mm nominal size dia , tubewell 3 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well casing (cm) pipe of required dia, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100mm nominal size dia , tubewell 4 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized plc. medium well screen(rms) pipes with ribs, conforming to is: 12818, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per director of engineer in charge.100 mm nominal size dia , tubewell 5 supplying, filling, spreading & levelling stone boulders of size range 5cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of engineer in charge. , tubewell 6 providing and fixing bail plug/ bottom plug of required dia to the bottom of pipe assembly of tube well as per is:2800(part i). 100 mm dia , submersible pump 35m deep boring with casing and pipe. supply of pipe etc supplying & installation of suitable 2hp submersible pump b.s or k.s.bor equivalent make with finolex cable 1x3x2.5 squmm(upto 50mtr) withflexible conduit 25mm dia, electrical out door pannel with required electrical fitting such as mcb of 0 25amp (havell or indocopp or mds make), volt & ampere meter (ae make), single phase preventer (minilac or vsp 1 make) starter (l&t or bch make) etc of approved make, 40mm hdpe pipe (25 mtr) and all accessories complete as per requirement of site. , water purifier and cooler 1 fitting and fixing single faucet storage type water cooler ( size 461 mm wide x 582 mm deep x 1217 mm height, weight 46 kg) fully stainless body having storage capacity of 40 ltrs, cooling capacity of 40 ltrs./hr. with hermetic type compressor, gas cooled motor equipped with over load protector, condensor for propeller type, thermostat autometically controlled temperature, refrigerent r 22, 230 volt, single phase 50 hertz, maximum current 2.3 amp including plug top and electrical lead wire connection upto 3 metres from the cooler, water inlet and drain out connections complete in all respects of voltas model no 40/40 tushar pss type or similar type of approved make. , water purifier and cooler 2 fitting and fixing water purifier for drinking purpose of capacity 6 litres/min, 5 purification system with reverse osmosis system with ultra ventilated membrane, tds500 to 2000 mgl/ppm, auto shut off with microswitch float manual flush facility, tds reduction 90% having automatic backwash system with filteration unit along with all accessories including plug top and electrical lead wire connection upto 3 metres from the purifier, water inlet and drain out connections complete in all respects similar to aquaguard or similar approved make (model aquasure elegant ro water purifier of size width 360 mm x height 430 mm x depth 235 mm and weight 8.5 kg). , fire extinguisher 1 providing and fixing carbon di oxide type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. capacity 4.5 kg. , fire extinguisher 2 providing and fixing abc powder type fire extinguishers consisting of welded m.s. cylindericalbody, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to is:15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge.capacity 6.0 kg. , electrical 1 wiring for light point/ fan point/ exhaust fan point/ call bellpoint with 1.5 sq.mm frls pvc insulated copper conductorsingle core cable in surface / recessed steel conduit, withmodular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required. group c , electrical 2 wiring for twin control light point with 1.5 sq.mm frls pvcinsulated copper conductor single core cable in surface /recessed steel conduit, 2 way modular switch, modular plate,suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required. , electrical 3 wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm frls pvc insulated copper conductor single core cable in surface/ recessed steel conduit, and earthing the point with 1.5 sq. mm frls pvc insulatedcopper conductor single core cable etc. as required. group c , pvc conduit 1 supplying and fixing of following sizes of medium class 20mmpvc conduit along with accessories in surface/ recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 2 supplying and fixing of following sizes of medium class 32mmpvc conduit along with accessories in surface/ recessincluding cutting the wall and making good the same incase of recessed conduit as required. , pvc conduit 3 supplying and fixing of following sizes of medium class 50mmpvc conduit along with accessories in surface/ recessincluding cutting the wall and making good the same incase of recessed conduit as required. , electrical 4 wiring for light/ power plug with 2x4 sq. mm frls pvcinsulated copper conductor single core cable in surface/recessed steel conduit alongwith 1 no. 4 sq. mm frls pvcinsulated copper conductor single core cable for loop earthingas required. , wiring frls pvc insulated copper conductor 1 2 x 2.5 sq. mm. + 1 x 2.5 sq. mm. earth wire , wiring frls pvc insulated copper conductor 2 2 x 4 sq.mm. + 1 x 4 sq.mm. earth wire , wiring frls pvc insulated copper conductor 3 2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire , wiring frls pvc insulated copper conductor 4 4 x 6 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 5 4 x 10 sq. mm + 2 x 6 sq. mm earth wire , wiring frls pvc insulated copper conductor 6 4 x 16 sq. mm + 2 x 16 sq. mm earth wire , s/f, gi box along with modular base & cover plate 1 1 or 2 module (75mm x 75mm) , s/f, gi box along with modular base & cover plate 2 3 module (100mm x 75mm) , s/f, gi box along with modular base & cover plate 3 4 module (125mmx75mm) , s/f, gi box along with modular base & cover plate 4 6 module (200mm x 75mm) , s/f, gi box along with modular base & cover plate 5 12 module (200mmx150mm) , s/f modular switch/ socket on the existing modular plate 1 5/6 amps switch , s/f modular switch/ socket on the existing modular plate 2 15/16 amp switch , s/f modular switch/ socket on the existing modular plate 3 3 pin 5/6 amp socket outlet , s/f modular switch/ socket on the existing modular plate 4 6 pin 15/16 amp socket outlet , s/f modular switch/ socket on the existing modular plate 5 telephone socket outlet , s/f modular switch/ socket on the existing modular plate 6 tv antenna socket outlet , s/f modular switch/ socket on the existing modular plate 7 bell push , fan regulator on the existing modular plate switch box supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. , call bell/ buzze supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. , electrical 5 supplying & fixing suitable size gi box wih modular plate and cover in front on surface or in recess including providing and fixing 25 a modular socket outlet and 25 a modular sp mcb, “c” curve including connections, painting etc. as required. (for ac/ geyser) , electrical 6 supplying and drawing co axial tv cable rg 6 grade, 0.7 mm solid copper conductor pe insulated, shielded with fine tinned copper braid and protected with pvc sheath in the existing surface/ recessed steel/ pvc conduit as required. , electrical 7 supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. , electrical 8 providing and fixing m.s. fan clamp type i or ii of 16 mm dia m.s. bar, bent to shape with hooked ends in r.c.c. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as required. , electrical 9 providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. clamp shall be made of 12 mm dia m.s. bar bent to shape as per standard drawing. , 40a fp isolator supplying and fixing following rating, four pole, 415 v, isolator in the existing mcb db complete with connections, testing andcommissioning etc. as required. , electrical 10 supplying and fixing 20 a, 240 v, spn industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 a c curve, sp, mcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. , electrical 11 supplying and fixing 20 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 12 supplying and fixing 30 a, 415 v, tpn industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 a c curve, tpmcb, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. , electrical 17 supplying and fixing following way, horizontal type three pole and neutral, sheet steel, mcb distribution board, 415 v, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator)8 way (4 + 24), double door , electrical 18 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer ) as required . (note : vertical type mcb tpdb is normally usedwhere 3 phase outlets are required.)4 way (4 + 12), double door , electrical 19 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer ) as required . (note : vertical type mcb tpdb is normally usedwhere 3 phase outlets are required.)8 way (4 + 24), double door , electrical 20 supplying and fixing cable end box (loose wire box) suitable for following triple pole and neutral, sheet steel, mcb distribution board, 415 volts, on surface/ recess, complete with testing and commissioning etc.as required. for 8 way, double door fp mcbdb , electrical 21 supplying and fixing cable end box (loose wire box) suitable for triple pole and neutral, sheet steel, vertical mcb distribution board, 415 v, on surface/ recess, complete with testing and commissioning etc. as required. , 25 a, rccb supplying and fixing following rating, double pole, (single phase and neutral), 240 v, residual current circuit breaker (rccb), having a sensitivity current 30 ma in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40 a, rccb supplying and fixing following rating, double pole, (single phase and neutral), 240 v, residual current circuit breaker (rccb), having a sensitivity current 30 ma in the existing mcb db complete with connections, testing and commissioning etc. as required. , single pole mcb supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , triple pole mcb supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 40a tp mcb supplying and fixing 40 a rating, 240/415 v, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 40a tp mcb , 40a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. 40a fp mcb , 63a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , 100a 4p mcb supplying and fixing of following mcbs, 415 volts, c curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing mcb db complete with connections, testing and commissioning etc. as required. , l/f pvc sheathed / xlpe power cable in trench 1 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 95 sq. mm and upto 185 sq. mm , l/f pvc sheathed / xlpe power cable in trench 2 laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm , l/f pvc sheathed / xlpe power cable over cable tray above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm ms flat clamp) , s/m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 1 3.5c x 185 sqmm, aluminium conductor cable a2xfy , s/m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 2 3.5c x 150 sqmm, aluminium conductor cable a2xfy , s/m end termination with brass compression gland and aluminium lugs aluminium conductor cable of 1.1 kv grade 3 4c x 35 sqmm aluminium conductor cable a2xfy , cable tray 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 100 mm width x 50 mm depth x 1.6 mm thickness , cable tray 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 300 mm width x 50 mm depth x 1.6 mm thickness , cable tray 3 supplying and installing following size of perforated hot dipped galvanised iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required. 600 mm width x 62.5 mm depth x 2.0 mm thickness , cable tray “bends” 1 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.100 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 2 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.300 mm width x 50 mm depth x 1.6 mm thickness , cable tray “bends” 3 supplying and installing following size of perforated hot dipped galvanised iron cable tray “bends” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with g.i. suspenders including g.i. bolts & nuts, etc. as required.600 mm width x 62.5 mm depth x 2.0 mm thickness , mv cable 1 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring (round (w) or flat (f) as mentioned) and with all components as mentioned , specifications, complete as required.3.5c x 185 sqmm, aluminium conductor cable a2xfy , mv cable 2 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring (round (w) or flat (f) as mentioned) and with all components as mentioned , specifications, complete as required.3.5c x 150 sqmm, aluminium conductor cable a2xfy , mv cable 3 supplying following 1.1kv grade, xlpe insulated, frls type, heavy duty armoured cables suitable for 415v, 50hz, ac system, with inner and outer pvc sheath, outer sheath provided with frls insulation, galvanised steel armouring (round (w) or flat (f) as mentioned) and with all components as mentioned , specifications, complete as required. 4c x 35 sqmm aluminium conductor cable a2xfy , earthing 1 earthing with g.i. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. , earthing 2 earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. , earthing 3 earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. , earthing 4 providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. , earthing 5 providing and fixing 25 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required. , earthing 6 providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required. , earthing 7 providing and fixing 25 mm x 5 mm g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut, bolt, spring, washer excavation and re filling etc. as required. , earthing 8 providing and fixing 25 mm x 5 mm copper strip in 40 mm dia g.i. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re filling etc. as required. , earthing 9 providing and fixing earth bus of 50 mm x 5 mm copper strip on surface for connections etc. as required. , earthing 10 providing and fixing earth bus of 50 mm x 5 mm gi strip on surface for connections etc. as required. , fiting & fixtures 1 supply and installation of regular/standard model a.c. ceiling fan of 1400 mm sweep including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm fr pvc insulated copper conductor etc as required. , fiting & fixtures 2 supplying and fixing single wall mounted 18/22 watt led type batten fitting complete with electronic driver and led tube etc directly on wall/ ceiling includingconnections with 1.5 sq.mm fr pvc insulated copper conductor and earthing the body etc. as required. , fiting & fixtures 3 supply installation and comissioning ofintegrated batten made (2ft) of ultra slim co extruded polycarbonate channel with housing part in white finish & diffuser part in reeded opal finish.white finish abs end caps with decorative circular coloured polycarbonate cap snap fitted on the end cap to enhance the aesthetic of the fixture. these end caps are snap fitted to the fixture.high efficiency long life led with lumen efficacy of 130 lm/w with viewing angle of 120º.powered by an integral isolated low thd electronic led driver ( smps based constant current supply) with output short circuit protection, surge protection.can be fixed directly into the wall/ ceiling , fiting & fixtures 4 supplying and fixing recess mounted 12 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 5 supplying and fixing recess mounted 18 watt led vertical downlighter complete with all accessories and replaceable electronic driver, directly on false ceilingincluding connection with 1.5 sq.mm fr pvc insulated copper conductor cable and earthing the body etc. as required. , fiting & fixtures 6 supply, installation, testing and commissioning of 400 mm sweep, 65w,blade material aluminium blades ,speed & oscillation 3 speed, pull cord for speed and oscillation